Hardness Tester Micro-Vickers Type HM-100

Size: px
Start display at page:

Download "Hardness Tester Micro-Vickers Type HM-100"

Transcription

1 Hardness Tester Micro-Vickers Type HM-100 Hardness tester according to ISO 6507 and JIS B7725. Micro-Vickers hardness tester with Vickers tests from HV 0.01 HV 1. Up to 3 objectives can be connected that can all be used for indent measurement (except HM-101). A Knoop indenter can also be connected. Manual lens system switch D D HM-112 Touch screen operation Reading of diagonals D1 and D2 Reading of hardness values Reading of XY stage position Test conditions such as test force or effective period Tolerance evaluation Measured value compensation when testing cylindrical or spherical surfaces Control of automatic lens system switch Conversion into other hardness scales Soft: HV, HK, HBS, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Statistical functions Number of values, max., min., average value, range, upper limit, lower limit, standard deviation, number of OK/Not OK evaluations, storage and editing of 256 values Test force (N) x 10 3 /HV0.01; /HV0.025; /HV0.05; /HV0.1; 1.961/HV0.2; 2.942/HV0.3; 4.903/HV0.5; 9.807/HV1 HM-101 HM-112 HM-101 HM-112 No D D Effective period 5 30 s (in 5 sec increments) 5 90 s (in 1 sec increments) Lens system 10 x; 50 x 10 x; 50 x Lens system switch manual Magnification 100 x; 500 x 100 x; 500 x Min. resolution 0,2 µm (50 x Objective) 0,01 µm Reading of hardness values at Vickers table via Touch Screen XY-stage dimensions 100 x 100 mm Traveling range 25 x 25 mm Graduation 0,01 mm 0,001 mm (Digital) height 95 mm; depth 150 mm (from center of the indenter shaft) Observation by micrometer eyepiece Data output RS-232 C / DIGIMATIC / Centronics Dimensions (W x H x D) Main unit 410 x 600 x 590 mm Main unit 42 kg Standard accessories x Objective x Objective 19BAA058 Diamond indenter XY table (HM-101) XY table (HM-112) Vice, max. 45 mm groove width 10BAA445 Camera-Adapter for CCD-camera 19BAA109 Dust protection cover 19BAA007 Hardness testing block (700 HV0.3) Vickers hardness testing table (HM-101) Halogen lamp (6 V/20 W) built-in (all models) Level No. 19BAA058 D Designation Diamond indenter (incl. MPA certificate) x Objective* x Objective* x Objective* x Objective* x Objective* * Installation by Mitutoyo XY table 50 x 50 mm, Table dimensions 125 x 125 mm Vice, max. 100 mm groove width Thin plate holder, (max. specimen thickness 5 mm) Wire holder horizontal, (max. Ø 3,2 mm) Wire holder vertical, (max. Ø 3,2 mm) Rotary table Special vice, swiveling (horizontal / vertical) Universal specimen holder Specimen holder, adjustable, for thin plates Further certified hardness comparison plates on request. Software with camera for measuring and evaluation on request. 412

2 Standard accessories 19BAA x Eyepiece 19BAA x Objective (HM-221 only) 19BAA x Objective x Objective 19BAA058 Diamond indenter Vickers (HM-211) 19BAA059 Diamond indenter Vickers (HM-221) XY table digital Vice, max. 51 mm groove width Optical green filter 11BAA961 Eye cup for eyepiece 19BAA522 Camera-Adapter 02DEA471 Dust protection cover 19BAA007 Hardness testing block (700 HV0,3) Batteries (SR-44) 19BAA207 Halogen lamp (12 V/50 W) Hardness Testers Micro-Vickers Type HM-200 Hardness testers according to ISO 6507 and JIS B Multifunctional. Built-in LCD color monitor with touch screen operation. Standard equipped with motorized and manual lens changer. These devices operate without deadweight by simple electromagnetic test force application. Lens changer may be equipped with up to 4 lenses and up to 2 indenters (Knoop/Vickers). Lenses with extremely large working distance. Camera port as standard. Test forces from HV 0,00005 to HV 2 (depending on the type of device). Servo powered and manual lens system switch as standard D Lenses and indenters Max. 4 lenses and max. 2 indenters (Knoop and Vickers) Request our detailed brochure! D with camera and monitor (optional accessories) Test force HM-211 HM-221 HV HV HV HV HV HV gf mn 0,4903 0,9807 1,961 2,942 4,903 HV HV0.001 HV0.002 HV0.003 HV0.005 gf mn 9,807 19,61 29,42 49,03 HV HV0.01 HV0.02 HV0.03 HV0.05 HV0.1 gf mn 98,07 196,1 294,2 490,3 980,7 HV HV0.2 HV0.3 HV0.5 HV1 gf mn HV HV2 gf 2000 mn A freely definable test force may be set. 413

3 Hardness Testers Micro-Vickers HM-200 HM-211 HM-221 No D D Selection of test force via touch screen Test force mechanism Electromagnetic force application Effective period s in 1-second increments Turret head mechanism automatic or manual Max number of lenses 4 Max. number of indenters 2 (1 pce. standard / 1 pce. option) Lens system (standard) 10 x; 50 x 10 x; 50 x; 100 x Eyepiece (standard) 10 x Working distance, lens 10 x = 5,6 mm / 50 x = 1,1 mm / 100 x = 2,5 mm XY-stage dimensions 100 x 100 mm Traveling range 25 x 25 mm Min. resolution, table 1 µm (built-in micrometer) height 133 mm; depth 160 mm (from center of indenter) Max. workpiece weight 20 kg incl. table and vice Display LCD Touch Panel Data output RS-232 C, Parallel (Centronics), DIGIMATIC Dimensions (W x H x D) Main unit 400 x 600 x 640 mm Main unit 43 kg Touch panel functions and display Hardness value conversion: SAE-table, ASTM table, DIN , BS i860, Mitutoyo Diagonals D1 / D2: max. 5 digits A Resolution: for lens $ 50 x 0,01 µm / for lens, 50 x 0,1 µm Further displayed Hardness value max. 4 digits, min. 0,1 HV/HK data / values Test force Indenter (HV/HK) Duration of load / effective period / unload Tolerance evaluation NG / GO / +NG X/Y stage position Measured value compensation for cylindrical and spherical surface measurements Measured value compensation general (offset) Turret head position Conversion to other hardness scales Statistical functions Display languages: German, Japanese, English, French, Italian, Spanish * 5 x Objective W.D. 13,5 mm * 20 x Objective W.D. 1,8 mm 19BAA440* 100 x Objective W.D. 2,5 mm 19BAA061** Knoop-indenter for HM BAA062** Knoop-indenter for HM Vice, max. 100 mm groove width Thin plate holder, max. specimen thickness 5 mm Wire holder horizontal Ø 0,4 3 mm Wire/ball holder vertical Ø 0,4 3 mm Special vice, swiveling groove width 37 mm, Horizontal: ± 25, Vertical: ± Universal specimen holder up to 30 mm Rotary table 1 scale graduation Rotary universal specimen holder max. workpiece height 30 mm max. workpiece Ø 38 mm Adjustable thin plate holder, max. sheet metal thickness 3 mm max. sheet metal thickness 56 mm D Statistical printer DP-1 VR Signal line for DP-1 VR * Installation through Mitutoyo engineer necessary. ** Device with test certificate for Knoop only available as option. Further certified hardness comparison plates on request! for expansion and optimization CCD camera Video screen Video camera D Integrating these components simplifies evaluation. Automatic measurement ( ) Frame Grabber CCD camera Camera adapter Software PC Automatic positioning ( D) Automatic XY table PC PC-AT drive Engine control circuit board / Digital I/O Integrating these components prevents test errors caused by the operator: automatic measurement of the indentation diagonals and calculation of the hardness value Combination with components for automatic measurement! Increases throughput and simplifies multi-point testing thanks to automated positioning of the test specimen D CCD video camera with external screen CCD video camera for connection to a computer and VL-Pak evaluation software D* Automatic XY table * Auto-focus unit to enhance the XY table * based on HM-211: D HM-221: D Automatic positioning Auto-focus unit ( ) PC-AT drive AF table Tube lens (sample focus) Joystick PC Joystick circuit board Integrating the auto-focus components together with automatic positioning and measurement produces a quick and fully automated hardness testing system. 414

4 Standard accessories x Objective 19BAA060 Diamond indenter Flat table Ø 64 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, 90 19BAA219 D Lamp built-in 19BAA110 Dust protection cover 19BAA016 Hardness testing block (720 HV 10) Vickers table Level Hardness Tester VICKERS Type AVK The basic Vickers hardness testing machine cost-efficient and simple! Measurement of diagonals using an analog measuring microscope and reading of hardness values from the external Vickers chart. 19BAA060 D Diamond indenter (incl. MPA certificate) Round table Ø 180 mm Round table Ø 250 mm Vice (max. groove width 100 mm) Further hardness testing blocks and upgrade kits for Brinell testing on request D Request our detailed brochure! AVK C0 No D Test force (N) 9,807; 49,03; 98,07; 196,1; 294,2; 490,3 Effective period 5 to 30 sec (in 5 sec increments) Objective 10 x Magnification 100 x Min. resolution 1 µm height 205 mm / depth 165 mm (from center of the indenter shaft) Observation by micrometer eyepiece Power supply 230 V, 50 Hz Dimensions (W x H x D) 200 x 705 x 600 mm 50 kg 415

5 Hardness Tester VICKERS + Brinell Type HV The motive revolver enables switchovers between penetrator and objectives via the display unit. The display unit is separate from the test machine itself to allow ergonomic and user-friendly operation. All major functions can be performed using the simple, intuitive touch screen. Use of 2 objectives for measurement. Simple and rapid statistical analysis of measuring results. Standard accessories x Objective x Objective 19BAA060 Diamond indenter Flat table Ø 64 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, 90 19BAA219 Halogen lamp (6 V/20 W), built-in 19BAA016 Hardness testing block (720 HV 10) 19BAA110 Dust protection cover D HV 112 / HV 114 HV 112 / HV 114 Touch screen operation Reading of diagonals D1 and D2 Reading of hardness values Test conditions such as test force or effective period Tolerance evaluation Measurement value compensation when measuring cylindrical or spherical surfaces Automatic lens changer control Conversion into other hardness scales Soft: HV, HK, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Statistical functions Number of values, max., min., average value, range, upper limit, lower limit, standard deviation, number of OK/Not OK evaluations, storage and editing of 256 values HV 112 HV 114 No D D Test force (N) 1,961; 2,942; 4,903; 9,807; 24,51; 49,03; 98,07; 196,1 9,807; 19,61; 29,42; 49,03; 98,07; 196,1; 294,2; 490,3 Effective period 5 99 sec (in 1 sec increments) Lens system 20 x, 10 x Lens system switch motor driven Magnification 200 x, 100 x Min. resolution 0,1 µm height 210 mm / depth 170 mm (from center of the indenter shaft) Observation by Micrometer eyepiecer Display LCD Touch screen Data output RS-232 C / Centronics / DIGIMATIC Dimensions (W x D x H) Main unit: 245 x 515 x 840 mm Main unit: 57 kg No. 19BAA060 D Designation Diamond indenter (incl. MPA certificate) x Objective* x Objective* * Installation by Mitutoyo 19BAA063 Knoop diamond indenter XY table 50 x 50 mm, Table dimensions 125 x 125 mm Vice, max. 45 mm groove width Vice, max. 100 mm groove width Round table Ø 180 mm Round table Ø 250 mm 19BAA445 Camera-Adapter for CCD-camera Brinell hardness testing: Special inquiry Further certified hardness comparison plates on request. Devices with external monitor for measuring diagonals: HV-113 and HV-115 on request. Software with camera for measuring and evaluation on request. 416

6 Hydraulic Brinell Hardness Tester ABK 1 ABK-1 is a hardness testing machine that is easy to operate and extremely accurate. It is used for testing raw materials, cast/forged parts and special steel. A large indentation can create a smooth surface even when measuring rough surfaces. The handle for vertical table movement uses an axial thrust bearing to ensure smooth and even upward and downward movements. The distribution of the weight ensures that test forces of between 4903 N (500 kgf) and N (3000 kgf) can be applied. Two different sized carbide penetrators (10 mm and 5 mm) can be used, depending on the sample. Standard accessories Weight for 4903 N (500 Kgf) (1 pce.) Weight for 2452 N (250 Kgf) (2 pairs) Weight for 9807 N (1000 Kgf) (2 pairs) Carbide ball Ø 5 mm (1 pce.) Carbide ball Ø 10 mm (1 pce.) Flat table Ø 68 mm (1 pce.) V-anvil (1 pce.) Microscope 20 x (1 pce.) Dust protection cover Brinell hardness table 19BAA162 Replacement carbide ball indenter Ø 5 mm (1 pce.) 19BAA163 Replacement carbide ball indenter Ø 10 mm (1 pce.) 19BAA166 D Hardness testing block 200 HB Request our detailed brochure! ABK 1 No Test force N 4903, 7355, 9807, 14710, 19614, 24517, Kgf 500, 750, 1000, 1500, 2000, 2500, 3000 Change of test force manual (weight exchange) Load process manual (load, dwell, unload) Max. workpiece height 200 mm Max. workpiece depth 155 mm Dimensions (W x D x H) 430 x 510 x 1100 mm approx. 180 kg 417

AUTOMATIC MICRO-HARDNESS TESTER ISOSCAN HV1 OD

AUTOMATIC MICRO-HARDNESS TESTER ISOSCAN HV1 OD 742EV2601 AUTOMATIC MICRO-HARDNESS TESTER ISOSCAN HV1 OD Automatic optical-digital system for Vickers micro-hardness testing from HV0,01 to HV1 according to ISO 6507-2 Standards. Compliance with ASTM E384

More information

HM-100. Micro Vickers Hardness Testing Machines. Redesigned range now even better for making hardness measurements on the smallest specimens

HM-100. Micro Vickers Hardness Testing Machines. Redesigned range now even better for making hardness measurements on the smallest specimens Test Equipment and Seismometers Micro Vickers Hardness Testing Machines HM-100 Redesigned range now even better for making hardness measurements on the smallest specimens Distributed by: Quality Solutions

More information

PRODUCT NEWS. Wizhard Hardness Tester. Digital Durometers. DFS-R Force Gauges. Series 810 See page 448. Series 811 See page 456

PRODUCT NEWS. Wizhard Hardness Tester. Digital Durometers. DFS-R Force Gauges. Series 810 See page 448. Series 811 See page 456 PRODUCT NEWS Wizhard Hardness Tester Series 810 See page 448 Digital Durometers Series 811 See page 456 DFS-R Force Gauges Series DFS-R See page 465 Test Equipment and Seismometers Rockwell/Rockwell Superficial/

More information

AUTOMATIC HARDNESS TESTER ISOSCAN HV50 AC

AUTOMATIC HARDNESS TESTER ISOSCAN HV50 AC 742EV2550 AUTOMATIC HARDNESS TESTER ISOSCAN HV50 AC Automatic optical-digital system for Vickers hardness testing from HV1 to HV50 according to ISO 6507-2 Standards. Compliance with ASTM E384 available

More information

Micro Hardness Testing Machines. Rockwell Hardness Testing Machines. Micro Zone Test System. Portable Hardness Testing Instruments

Micro Hardness Testing Machines. Rockwell Hardness Testing Machines. Micro Zone Test System. Portable Hardness Testing Instruments K Test Equipment Micro Hardness Testing Machines Rockwell Hardness Testing Machines Micro Zone Test System Portable Hardness Testing Instruments INDEX Test Equipment Micro Hardness Testing Machines Lineup

More information

VICKERS HARDNESS TESTER. HBS HBW Kc

VICKERS HARDNESS TESTER. HBS HBW Kc ICKERS HARDNESS TESTER H HK HBS HBW Kc Clean Touch Panel coordinated with highly integrated PC board. Measuring procedures, conditions and data are displayed clearly. (F-800 Series) Accurate light load

More information

Partners in Precision

Partners in Precision Bowers Eclipse Equipment Shanghai Co., Ltd. 8th Bld, No. 178 Chengjian Rd, Shanghai, 201108, China Tel: +86-21-64348600 Fax: +86-21-64346488 Email: sales@bowers-shanghai.com Website: bowers-shanghai.com

More information

Micro Vickers Hardness Testing Machines

Micro Vickers Hardness Testing Machines Test Equipment and Seismometers Micro Vickers Hardness Testing Machines Catalog No.E17003 All-in-one model with simple touch-panel operation Micro Vickers Hardness Testing Machines HM-200 Series Equipped

More information

400 SERIES. Micro-Vickers Hardness Testers

400 SERIES. Micro-Vickers Hardness Testers 400 SERIES Micro-Vickers Hardness Testers MICRO-VICKERS HARDNESS TESTERS 400 SERIES 400 ANALOGUE 400 DIGITAL MICRO-VICKERS & KNOOP MICRO-VICKERS & KNOOP 2 VICKERS HARDNESS TESTING FEATURES 400A SERIES

More information

Feature. The new function deploy. LCD touch panel. The turret which mounted two indenter, four objective lenses

Feature. The new function deploy. LCD touch panel. The turret which mounted two indenter, four objective lenses Feature NEW MICRO HARDNESS TESTER The new function deploy. LCD touch panel Visibility and operativity improve by color LCD touch panel. In addition to conventional HV, HK measuring mode, four kinds of

More information

NEXUS 4000 SERIES. Vickers Hardness Testers

NEXUS 4000 SERIES. Vickers Hardness Testers NEXUS 4000 SERIES Vickers Hardness Testers VICKERS HARDNESS TESTERS NEXUS 4000 SERIES NEXUS 4000 LOAD CELL, CLOSED LOOP SYSTEM 1 VICKERS HARDNESS TESTING FEATURES High-end Vickers/Knoop/Brinell tester

More information

MICROSCAN AC. Description AUTOMATIC MICRO-HARDNESS TESTER

MICROSCAN AC. Description AUTOMATIC MICRO-HARDNESS TESTER 742030200 AUTOMATIC MICRO-HARDNESS TESTER MICROSCAN AC Automatic optical-digital system for Vickers micro-hardness testing from HV0,01 to HV1 (up to HV5 with optional loads) according to ISO 6507-2 Standards.

More information

NEXUS 4000 Series Vickers hardness tester

NEXUS 4000 Series Vickers hardness tester NEXUS 4000 SERIES NEXUS 4000 Series Vickers hardness tester Features High-end Vickers/Knoop/Brinell tester with low and high force ranging from 10gf/0.098N to 62.5kgf/61.2N. Closed Loop, Load Cell, Force

More information

BUEHLER IndentaMet 1100 Series

BUEHLER IndentaMet 1100 Series BUEHLER IndentaMet 1100 Series MICRO, SEMI-MACRO & MACRO VICKERS INDENTATION HARDNESS TESTERS Manual or Automated Models Wide Selection of Accessories Dual Indenter Microindentation Models Automated Stage

More information

HARDNESS TESTING DUROLINE M/LV/V. metkon.com

HARDNESS TESTING DUROLINE M/LV/V. metkon.com HARDNESS TESTING DUROLINE M/LV/V metkon.com VICKERS HARDNESS TESTING DUROLINE M/LV/V METKON DUROLINE Hardness testers are versatile, user-friendly, and provide an affordable, reliable solution for accurate

More information

NOVA 130/240 Micro Vickers & Knoop hardness tester

NOVA 130/240 Micro Vickers & Knoop hardness tester NOVA 130/240 SERIES NOVA 130/240 Micro Vickers & Knoop hardness tester 2 www.innovatest-europe.com NOVA 130/240 series Micro Vickers & Knoop hardness tester The new NOVA 130 & 240 series, Vickers and Knoop

More information

NOVA 330/360 Micro Vickers & Knoop hardness tester

NOVA 330/360 Micro Vickers & Knoop hardness tester NOVA 330/360 SERIES NOVA 330/360 Micro Vickers & Knoop hardness tester NOVA 330/360 series Micro/Macro Vickers & low force Brinell hardness tester The new NOVA 330 & 360 series, Load Cell, Closed Loop,

More information

Vickers Hardness. Testing Machines. Rockwell Hardness Testing Machines. Portable Hardness Testing Instruments. Data Logger.

Vickers Hardness. Testing Machines. Rockwell Hardness Testing Machines. Portable Hardness Testing Instruments. Data Logger. Test Equipment Micro Hardness Testing Machines Vickers Hardness Testing Machines Rockwell Hardness Testing Machines Portable Hardness Testing Instruments Vibration Pickup Servo Type Acceleration Pickup

More information

NOVA 130/240 Micro Vickers & Knoop hardness tester

NOVA 130/240 Micro Vickers & Knoop hardness tester NOVA 130/240 SERIES NOVA 130/240 Micro Vickers & Knoop hardness tester 2 www.innovatest-europe.com NOVA 130/240 series Micro Vickers & Knoop hardness tester The new NOVA 130 & 240 series, Vickers and Knoop

More information

UCI ASTM-A , DIN , JB-T

UCI ASTM-A , DIN , JB-T Ultrasonic Portable Hardness Tester UCI- 3000 ASTM-A1038-2005, DIN 50159-1-2008, JB-T9377-2010 www.worldoftest.com/ultrasonic-portable-hardness-tester-uci-3000 Advanced Ultrasonic Hardness Tester UCI 3000

More information

DM 8. Vickers, Knoop

DM 8. Vickers, Knoop DM 8 Vickers, Knoop DM 8 - The models DM 8 DM 8 SEMI DM 8 AUTO Manual focus - Manual reading Manual focus - Automatic reading Automatic focus - Automatic reading Automatic hardness tester for micro and

More information

Newage hardness testing. MS-ZH Series. Streamline your Microhardness Testing

Newage hardness testing. MS-ZH Series. Streamline your Microhardness Testing MS-ZH Series Streamline your Microhardness Testing Quality Assured Systems Manual to Computer assisted to Fully automatic The MS-ZH series is offered in Stand-alone manual versions, Computer assisted variants

More information

Portable Hardness Tester

Portable Hardness Tester A Portable Hardness Tester A Portable Hardness Tester TIME 5300 P02 A2 Portable Hardness Tester TIME 530 P03 A3 Portable Hardness Tester TIME 5302 P04 A4 Portable Hardness Tester TIME 5303 P05 A5 Portable

More information

NEXUS 8000 SERIES. Universal hardness tester

NEXUS 8000 SERIES. Universal hardness tester NEXUS 8000 SERIES Universal hardness tester NEXUS 8000 Series Universal hardness tester 15 industrial touch screen, embedded high performance PC with two SSD drives for enhanced reliability IMPRESSIONS

More information

Digital Vickers Hardness Tester MODEL ISH-DV50 USER S MANUAL.

Digital Vickers Hardness Tester MODEL ISH-DV50 USER S MANUAL. Digital Vickers Hardness Tester MODEL ISH-DV50 USER S MANUAL Contents: I General Description II Main Specifications III Installation and Commissioning 1. Working Conditions 2. Unpacking & Installation

More information

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic

More information

CLEMEX intelligent microscopy

CLEMEX intelligent microscopy CLEMEX intelligent microscopy The real High Definition Solution in micro & macro hardness Get the whole picture. Visualize the entire sample. Position indents precisely. Get accurate results CLEMEX intelligent

More information

Hardness Testing Systems

Hardness Testing Systems Hardness Testing Systems Delivering the Right Results LECO Hardness Testing Systems One is Right for You. LECO offers a wide selection of hardness testing systems to match any application or budget. Choose

More information

i-checker SERIES 170 Inspection Instrument for Dial Indicator

i-checker SERIES 170 Inspection Instrument for Dial Indicator i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke

More information

FALCON 500 Standard frame, manual X-Y stage

FALCON 500 Standard frame, manual X-Y stage ALCON 500 SERIES ALCON 500 Standard frame, manual X-Y stage ALCON 500 Micro/Macro Vickers & low force Brinell hardness tester The ALCON 500 series, Micro Vickers, Vickers and Micro Brinell hardness testing

More information

We have not only branch company in Europe, but also global net work of after-sales service with sufficient technical resources and maintenance.

We have not only branch company in Europe, but also global net work of after-sales service with sufficient technical resources and maintenance. TIME Group Inc. established in 1984, located in Beijing, China, is a high-tech leading manufacturer of Testing Instruments, welding machines and testing machines. Over 20 years, TIME Group Inc. is always

More information

FALCON 500 series Standard frame, motorized CNC X-Y stage

FALCON 500 series Standard frame, motorized CNC X-Y stage ALCON 500 SERIES ALCON 500 series Standard frame, motorized CNC X-Y stage ALCON 500 series Micro/Macro Vickers & low force Brinell hardness tester The ALCON 500 series, Micro Vickers, Vickers and Micro

More information

Portable Hardness Tester DHT-100

Portable Hardness Tester DHT-100 Portable Hardness Tester DHT-100 Large LCD display with back light Impact devices D DC DL C D+15 G and E are available for special applications RS 232 output Automatic conversions to: Brinell HB, Rockwell

More information

JSR GROUP. Profile Projector. PJ-A3000 SERIES 302 Profile Projectors

JSR GROUP. Profile Projector. PJ-A3000 SERIES 302 Profile Projectors PJ-A3000 SERIES 302 s The PJ-A3000 Series profile projectors are medium-size models that feature excellent versatility and easy operation. Easy-to-read digital XY counter is located near the projection

More information

NEMESIS 9000 TM SERIES. Universal Hardness Tester

NEMESIS 9000 TM SERIES. Universal Hardness Tester NEMESIS 9000 TM SERIES Universal Hardness Tester UNIVERSAL HARDNESS TESTERS NEMESIS 9000 SERIES Load cell, closed loop, linear force actuator, fixed workpiece position Flexible modular design Force configuration

More information

Sample holder. 4-fold sample holder. Ø 30 mm and 1,25" max. height of sample 25 mm. Ø 40 mm and 1,5" Ø 50 mm and 2" for Ø 50 mm and 2"

Sample holder. 4-fold sample holder. Ø 30 mm and 1,25 max. height of sample 25 mm. Ø 40 mm and 1,5 Ø 50 mm and 2 for Ø 50 mm and 2 Sample holder M1Z076 Ø 30 mm and 1,25" M1Z077 Ø 40 mm and 1,5" M1Z078 Ø 50 mm and 2" 4-fold Sample holder M1Z478G2 4-fold sample holder for Ø 50 mm and 2" 31.10.2012 1/2 www.emcotest.com 6-fold Sample

More information

NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW

NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW Special SPRING / SUMMER 2016 Valid until 30th September 2016 (subject to availability) www.bowersgroup.co.uk Offers Sylvac S_Cal EVO Bluetooth Caliper See page 5 for details. See Bowers Group at MACH 2016,

More information

MACROMET 3100 TWIN TYPE

MACROMET 3100 TWIN TYPE MACROMET 3100 TWIN TYPE Declaration of Conformity Manufacture: Of: BUEHLER, Ltd. 41 Waukegan Road Lake Bluff, Illinois 60044 Declares the following product: To be in accordance with EC Directive(s): Safety

More information

1D/2D Measuring Gage LINEAR HEIGHT

1D/2D Measuring Gage LINEAR HEIGHT Small Tool Instruments and Data Management 1D/2D Measuring Gage LINEAR HEIGHT CATALOG No. E4162-518 World-class accuracy, cost effective, ergonomic design and optional large-capacity battery pack plus

More information

NEMESIS 9500 TM SERIES Universal Hardness Testers

NEMESIS 9500 TM SERIES Universal Hardness Testers NEMESIS 9500 TM SERIES Universal Hardness Testers UNIVERSAL HARDNESS TESTERS NEMESIS 9500 SERIES Load cell, closed loop, linear force actuator, fixed workpiece position High performance embedded micro

More information

NEMESIS 9500 TM SERIES

NEMESIS 9500 TM SERIES NEMESIS 9500 TM SERIES NEMESIS 9500 TM Series Universal hardness tester General information The NEMESIS 9500 is the universal hardness tester most suitable for heavy duty testing in the INNOVATEST standard

More information

Profile Projectors. Microscopes

Profile Projectors. Microscopes I Optical Measuring Profile Projectors Microscopes MF-UB3017D INDEX Profile Projectors PJ-A3000 Series 302-Vertical I-2,3 PJ-H30 Series 303-High Accuracy I-4,5 PV-5110 Series 304 I-6,7 PH-A14 Series 172

More information

DUROMETROS PORTATILES DE ALTA PRECISION

DUROMETROS PORTATILES DE ALTA PRECISION DUROMETROS PORTATILES DE ALTA PRECISION COMPUTEST SCX portable electronic hardness tester The proper solution for any hardness control issue DYNATEST SCX portable hardness tester HANDY ESATEST X portable

More information

LINEAR HEIGHT LH-600 PRE 1286(2) 1-D / 2-D

LINEAR HEIGHT LH-600 PRE 1286(2) 1-D / 2-D Small Tool Instruments and Data Management LINEAR HEIGHT LH-600 PRE 1286(2) 1-D / 2-D height gage with the highest level of precision worldwide (1.1+0.6L/600) μm Linear Height is a multi-functional height

More information

Micro Vickers Hardness Tester

Micro Vickers Hardness Tester Add: 6th Floor, Nguyen Hung Phu Building, 400 Nguyen Thi Thap Street, Tan Quy Ward, District 7, HCMC, Vietnam TEL: 08-8-37711635 FAX: 08-37711691 E-mail : contact_vn@tamsui.jp Website : http://tamsui.vn/

More information

Micrometers / Micrometer heads

Micrometers / Micrometer heads Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275

More information

MITUTOYO MEASUREMENT SOLUTIONS!

MITUTOYO MEASUREMENT SOLUTIONS! Action valid from 1st June to 30th June 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices

More information

Hardness Testing Systems

Hardness Testing Systems Hardness Testing Systems LECO Hardness Testing Systems One is Right for You. LECO offers a wide selection of hardness testing systems to match any application or budget. Choose from manual and automatic

More information

FORMTRACER SV-C3100/4100 Series

FORMTRACER SV-C3100/4100 Series Form Measurement Surface Roughness/Contour Measuring System FORMTRACER SV-C3100/4100 Series Catalog No. E4304-525 Dual-purpose measurement and powerful analysis of surface roughness and contours combined

More information

Mitutoyo General Catalog

Mitutoyo General Catalog Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer

More information

Digital Measurement Metrology, Inc. Bulletin No Digital Measurement Metrology, Inc PRECISION IS OUR VISION

Digital Measurement Metrology, Inc. Bulletin No Digital Measurement Metrology, Inc PRECISION IS OUR VISION Bulletin No. 2021 Profile Projectors A series of midsize profile projectors featuring bright, 12.40" (315mm) diameter screens and easy-to-operate XY measurement tables. Easy-to-read digital counters are

More information

New Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.

New Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic. Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer

More information

High-resolution Digimatic Measuring Unit LITEMATIC

High-resolution Digimatic Measuring Unit LITEMATIC Sensor Systems High-resolution Digimatic Measuring Unit LITEMATIC Catalog No. E4244-318 Ultra-low measuring force, high accuracy and superb resolution make an unbeatable combination High accuracy & low

More information

NEW - Quick Mode - The revolutionary way to simplify measurement!

NEW - Quick Mode - The revolutionary way to simplify measurement! + D i g i m a r NEW - Quick Mode - The revolutionary way to simplify measurement! The new Height Measuring Instrument Digimar 817 CLM Quick Height 2 Digimar 817 CLM Quick Height The new Height Measuring

More information

SURFACE MEASUREMENT SURFTEST SJ-201 / SJ-301

SURFACE MEASUREMENT SURFTEST SJ-201 / SJ-301 Form Measurement Technical Data. SURFACE MEASUREMENT SURFTEST SJ-201 / SJ-301 7.7mm V-type adapter: 12AAE644 (supplied as standard) Point-contact adapter: 12AAE643 (supplied as standard) 72mm Drive Unit

More information

HARTIP2000 is an innovative portable Leeb hardness

HARTIP2000 is an innovative portable Leeb hardness HARTIP HARDNESS TESTER SADT HARTIP2000/HARTIP2000 D&DL 1 SADT HARTIP2200 2 SADT HARTIP1900 3 SADT HARTIP1800/HARTIP1800 D&DL 4 SADT HARTIP1800B/HARTIP1800B D&DL 5 SADT HARTIP 3000 6 SADT HARTIP1500/HARTIP1000

More information

ABS Digimatic Indicator ID-C

ABS Digimatic Indicator ID-C Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality

More information

Clever hardness testing made fast and simple

Clever hardness testing made fast and simple Clever hardness testing made fast and simple DuraJet 5-187,5 kgf Rockwell Super Rockwell Plastic testing HBD, HVD www.emcotest.com Design meets technology. A revolution in Rockwell hardness testing. 2

More information

Surface Roughness Testing

Surface Roughness Testing Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the

More information

Diagonal FOV 18.5mm - 2.7mm ( inch); Video Magnification 30x-210x on 22" Monitor.

Diagonal FOV 18.5mm - 2.7mm ( inch); Video Magnification 30x-210x on 22 Monitor. HD803-BSM22 HD803 3D HD High Definition 1080p Rotational Microscope with Detent Working Distance. Diagonal FOV 18.5mm - 2.7mm (0.72-0.10 inch); Video Magnification 30x-210x on 22" Monitor. HD 1080P 60

More information

Thickness Gages SERIES 547, 7

Thickness Gages SERIES 547, 7 Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide

More information

ABS Digimatic Indicator ID-C

ABS Digimatic Indicator ID-C Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality

More information

Bore Gages SERIES 526 for Extra Small Holes

Bore Gages SERIES 526 for Extra Small Holes Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is

More information

V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes

V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant

More information

HEIGHT GAUGE Hi_Cal & Hi_Gage ONE

HEIGHT GAUGE Hi_Cal & Hi_Gage ONE HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.

More information

Duramin-A300. Hardness tester with extended test load range for Vickers, Knoop, Brinell and Superficial Rockwell tests

Duramin-A300. Hardness tester with extended test load range for Vickers, Knoop, Brinell and Superficial Rockwell tests Duramin-A300 Hardness tester with extended test load range for Vickers, Knoop, Brinell and Superficial Rockwell tests Unique test load range from 0.981 N (100 g) to 306.6 N (31.25 kg) enables Duramin-A300

More information

Form Measurement ROUNDTEST RA-1600

Form Measurement ROUNDTEST RA-1600 Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful

More information

All Series Video Measuring Machine

All Series Video Measuring Machine All Series Video Measuring Machine VMM series are one of the best developed products in Carmar s product lines. Providing customers with precise, cost effective equipments and good service are our business

More information

Proven in harsh environments since 5 generations

Proven in harsh environments since 5 generations Proven in harsh environments since 5 generations DuraJet G5 1-250 kgf Rockwell Super Rockwell Plastic testing Carbon testing HBD, HVD www.emcotest.com The robust multi-talent. Precision, flexibility and

More information

TR-200 Surface roughness tester

TR-200 Surface roughness tester TR-200 TR-200 Surface roughness tester 2 www.innovatest-europe.com Features High performance instrument Easy to operate menu software Graphical display on large LCD 13 different roughness parameters Pick-up

More information

i-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54

i-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54 i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm

More information

Illumination Units Page 449. Measuring Microscopes Page 452. Microscope Units Page 479. Eyepieces and Objective Lenses Page 482

Illumination Units Page 449. Measuring Microscopes Page 452. Microscope Units Page 479. Eyepieces and Objective Lenses Page 482 Optical Measuring Illumination Units Page 449 Magnifiers Page 40 Measuring Microscopes Page 42 Microscope Units Page 479 Eyepieces and Objective Lenses Page 482 Measuring Projectors Page 489 448 Cold-light

More information

Hardness measurement of rubber and elastomers IRHD ISO 48 VLRH DIN ISO 27588

Hardness measurement of rubber and elastomers IRHD ISO 48 VLRH DIN ISO 27588 LNP nano touch The groundbreaking solution for material testing and geometry acquisition Hardness measurement of rubber and elastomers IRHD ISO 48 VLRH DIN ISO 27588 Deterioration Adhesion Immediate Precise

More information

FALCON 5000 series Quick change anvil position

FALCON 5000 series Quick change anvil position ALCON 5000 SERIES ALCON 5000 series Quick change anvil position ALCON 5000 series Micro/Macro Vickers & low force Brinell hardness tester If merely the best and most versatile hardness testing machine

More information

Every tool comes with Certificate of Inspection (see back for details)

Every tool comes with Certificate of Inspection (see back for details) Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct

More information

DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.

DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. - DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it

More information

Popular Items Recomended

Popular Items Recomended 1 2 CALIPER Vernier Caliper - Standart Type Round depth bar (30-102) OD measurement ID measurement 530-101 Step measurement Depth measurement MT0000098 530-101 0-150MM 0.05MM - MT0000099 530-102 0-150MM

More information

SURFTEST SJ-201/301 PORTABLE SURFACE ROUGHNESS TESTER. Excellent, Portable Surface Roughness Testing with Enhanced Capabilities.

SURFTEST SJ-201/301 PORTABLE SURFACE ROUGHNESS TESTER. Excellent, Portable Surface Roughness Testing with Enhanced Capabilities. Form Measurement PORTABLE SURFACE ROUGHNESS TESTER SURFTEST SJ-201/301 Bulletin No. 1812 Excellent, Portable Surface Roughness Testing with Enhanced Capabilities World-Class Portable Surface Roughness

More information

Non-Contact Depth Measuring Microscope System DH2/IMH

Non-Contact Depth Measuring Microscope System DH2/IMH Non-Contact Depth Measuring Microscope System DH2/IMH Specially designed focus indicator (Target Mark) facilitates focusing operation greatly. Highly accurate and repeatable measurement is possible. No

More information

Page 1

Page 1 4K102-LBSM28 and 1x. LED ring light, Basic Stand and 28 inch 4K UHD Monitor are included. Optional USB device for image&video capture and measurement software are not included. 4K102-LABM28 4K102-LUSM28

More information

Superior slit lamps by Rodenstock RO 5000, RO 4000, RO 3000

Superior slit lamps by Rodenstock RO 5000, RO 4000, RO 3000 Superior slit lamps by Rodenstock RO 5000, RO 4000, RO 3000 Rodenstock Slit lamps. Reliable technology. Your requirements for a multifunctional slit lamp has inspired us to produce the latest product range

More information

N3D G3 N3A. Rockwell hardness testing machine

N3D G3 N3A. Rockwell hardness testing machine N3D G3 N3A Rockwell hardness testing machine High efficiency - low cost. Customised test loads and easy handling. N3D G3 N3A Rockwell acc. to EN ISO 6508, ASTM E-18 HRA HRL HR 15-T HR 15-Y HRB HRM HR 30-T

More information

QC20-W wireless ballbar system description and specifications

QC20-W wireless ballbar system description and specifications QC20-W wireless ballbar system QC20-W wireless ballbar system description and specifications Hardware Software QC20-W ballbar and ballbar kit QC20-W ballbar The QC20-W ballbar contains a precision linear

More information

HEIGHT GAUGE Hi_Cal 150 / 300

HEIGHT GAUGE Hi_Cal 150 / 300 HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.

More information

S_Cal PRO. Professionnal Caliper DESCRIPTION

S_Cal PRO. Professionnal Caliper DESCRIPTION HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains

More information

HD802 (17x-914x on 24 inch HD monitor) Full HD 1080p

HD802 (17x-914x on 24 inch HD monitor) Full HD 1080p ehd802-lbs HD802-LBS Digital USB Microscope. Capture images (5MP 2592 1944) 15fps@USB2.0 15fps@HDMI Lens adapters included are: ring light, Basic Stand are included. ring light, Basic Stand are included.

More information

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain

More information

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges... STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...

More information

Application Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.

Application Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E. E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer

More information

SURFTEST SJ-301 PORTABLE SURFACE ROUGHNESS TESTER. Excellent, Portable Surface Roughness Testing with Enhanced Capabilities.

SURFTEST SJ-301 PORTABLE SURFACE ROUGHNESS TESTER. Excellent, Portable Surface Roughness Testing with Enhanced Capabilities. Form Measurement PORTABLE SURFACE ROUGHNESS TESTER SURFTEST SJ-301 Bulletin No. 1988 Excellent, Portable Surface Roughness Testing with Enhanced Capabilities World-Class Portable Surface Roughness Testers

More information

ecos Workflow xchange Documentation for remote control DuraScan 10, 20 DuraVision 20, 30, 40, 200, 300, 400 Y O U R F A C T O R O F S A F E T Y

ecos Workflow xchange Documentation for remote control DuraScan 10, 20 DuraVision 20, 30, 40, 200, 300, 400 Y O U R F A C T O R O F S A F E T Y ecos Workflow xchange Documentation for remote control DuraScan 10, 20 DuraVision 20, 30, 40, 200, 300, 400 Y O U R F A C T O R O F S A F E T Y 1 Table of contents 1 Table of contents... 2 2 General description...

More information

DHT-100 Instruction Manual

DHT-100 Instruction Manual DHT-100 Instruction Manual Content 1. SUMMARY... 1 2. FUNCTIONS... 1 2.1. Typical Applications... 2 2.2 Technical Data... 2 2.3 Available Functions... 3 2.4 Measuring and Converting Ranges... 3 2.5 Impact

More information

Biological Microscope CX43/CX33. CX3 Series. Comfortable, High-Throughput Routine Microscopy

Biological Microscope CX43/CX33. CX3 Series. Comfortable, High-Throughput Routine Microscopy Biological Microscope CX43/CX33 CX3 Series Comfortable, High-Throughput Routine Microscopy Comfortable for Long Periods of Routine Microscopy The CX33 and CX43 microscopes enable users to remain comfortable

More information

ROUNDTEST RA-120/120P

ROUNDTEST RA-120/120P Form Measurement Compact Roundness Measurement ROUNDTEST RA-120/120P Catalog No. E15008(2) Compact roundness tester equipped with a wide range of analysis features and capable of flexibly accommodating

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

Instruction Manual Mobile digital Leeb Impact Hardness Tester

Instruction Manual Mobile digital Leeb Impact Hardness Tester Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel.: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Mobile digital Leeb Impact Hardness Tester

More information

All Series Video Measuring Machine

All Series Video Measuring Machine All Series Video Measuring Machine Vision measuring system is one of the best developed products in Carmar s scope of supply. Offering cost effective equipments with high accuracy and good service are

More information

Rotary Microtomes. Tissue Processors. Embedding Centers. Microtomes. Cryostats. Water Bath & Slide Warmer. Staining Systems.

Rotary Microtomes. Tissue Processors. Embedding Centers. Microtomes. Cryostats. Water Bath & Slide Warmer. Staining Systems. Rotary Microtomes All SLEE microtomes are produced at the company s seat in Mainz, Germany. The highly precise, modularly built rotary microtomes range from a manual unit, type CUT 4062, via the semi-automatic

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

VX85 Slit Lamps. Precision at high level. Electric height adjustment VX85

VX85 Slit Lamps. Precision at high level. Electric height adjustment VX85 Slit Lamps VX85 Slit Lamps Precision at high level Converging 6-3 magnifications Parallel 6-3 magnifications REF. 8485-0001-03 REF. 8485-0002-03 Converging 6-5 magnifications Parallel 6-5 magnifications

More information