Incremental encoders Solid shaft with EURO flange B pulses per revolution

Size: px
Start display at page:

Download "Incremental encoders Solid shaft with EURO flange B pulses per revolution"

Transcription

1 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial, radial or tangential Pulses per revolution up to 5000 High protection up to IP 67 High resistance to shock and vibrations EIL580 with EURO flange B Technical data - electrical ratings Voltage supply 5 VDC ±5 % 8... VDC VDC Reverse polarity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, max. 1 s and 1 signal) Consumption w/o load 70 m Pulses per revolution Phase shift 90 ± Scan ratio % Reference signal Zero pulse, width 90 ± % Sensing method Optical Output frequency 0 khz (TTL) 160 khz (HTL) Output signals +, B+, R+, -, B-, R- Output stages TTL/RS422 HTL/push-pull Interference immunity DIN EN Emitted interference DIN EN pproval UL 508 / CS 22.2 Technical data - mechanical design Size (flange) Shaft type dmitted shaft load Protection DIN EN ø1 mm ø11 x mm solid shaft with 40 N axial 80 N radial IP 65 (without shaft seal), IP 67 (with shaft seal) Operating speed 6000 rpm (+20 C, IP 67) rpm (+20 C, IP 65) Starting torque 0.0 Nm (+20 C, IP 65) 0.02 Nm (+20 C, IP 67) Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Operating temperature C Relative humidity 90 % non-condensing Resistance DIN EN Vibration g, Hz DIN EN Shock 0 g, 6 ms Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Weight approx. 485 g 1

2 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse Part number EURO flange B EIL580-S 1 B1... Pulse number - see table E H N Q Voltage supply / output stages 5 VDC, TTL/RS422, 6 channel 8... VDC, TTL/RS422, 6 channel 8... VDC, HTL/push-pull, 6 channel VDC, HTL/push-pull, 6 channel R L F B T U D P Q Connection Cable radial, 1 m Cable radial, 2 m Flange connector M23, 12-pin, radial, male, ccw Flange connector M12, 8-pin, radial, male, ccw Cable axial, 1 m Cable axial, 2 m Flange connector M23, 12-pin, axial, male, ccw Flange connector M12, 8-pin, axial, male, ccw Cable tangential, 1 m Cable tangential, 2 m Protection 5 IP 65 7 IP 67 Specification solid shaft B1 ø11 x mm, with Pulse number Flange 1 EURO flange B ccessories Mounting accessories K 35 Spring washer coupling for solid shaft ø mm K 50 Spring washer coupling for solid shaft ø mm K 60 Spring washer coupling for solid shaft ø mm 2

3 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse Output signals Trigger level Outputs TTL/RS422 Output level High 2.5 V Output level Low 0.5 V Load 20 m Terminal assignment Flange connector M23, 12-pin / cable Pin Core color ssignment 1 pink B- 2 3 blue R+ 4 red R- 5 green + 6 yellow grey B+ 9 white GND brown UB Screen: Connected to housing Cable data: PVC, [4x2x0.14 mm 2 ], bending radius > mm, outer diameter 6.5 mm Outputs Output level High Output level Low Load HTL/Push-pull UB -3 V 1.5 V 20 m Flange connector M12, 8-pin Pin ssignment 1 GND 2 UB B+ 6 B- 7 R+ 8 R

4 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, flange connector M12, radial ø0 M12x1 EURO flange B, flange connector M23, radial M23x1 ø0 4

5 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, cable radial 0.02 ~ ø0 EURO flange B, flange connector M12, axial M12x1 3 ø0 5

6 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, flange connector M23, axial M23x1 3 ø0 EURO flange B, cable axial 0.02 ~ ø0 6

7 Solid shaft with EURO flange B pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, cable tangential ø

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional

More information

POG 10 + DSL. Features

POG 10 + DSL. Features Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled

More information

Speed switches Programmable, digital speed switch With incremental encoder POG 10

Speed switches Programmable, digital speed switch With incremental encoder POG 10 Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed

More information

Speed switches Programmable, digital speed switch With incremental encoder HOG 10

Speed switches Programmable, digital speed switch With incremental encoder HOG 10 Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed

More information

Absolute encoders - SSI

Absolute encoders - SSI Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available

More information

Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485

Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485 Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol

More information

Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT

Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI

More information

Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT

Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations

More information

Absolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT

Absolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High

More information

Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW

Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming

More information

SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS

SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according

More information

Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn

Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,

More information

Absolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT

Absolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up

More information

Absolute encoders - bus interfaces

Absolute encoders - bus interfaces Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580

More information

AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings

AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen

More information

DATA SHEET ABSOLUTE ROTARY ENCODER SSI

DATA SHEET ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -

More information

MHAP HDmag. Features

MHAP HDmag. Features Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2

TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2 Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)

More information

EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI

EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology

More information

TECHNICAL DATASHEET Incremental Encoder RI 58-F

TECHNICAL DATASHEET Incremental Encoder RI 58-F Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications

More information

PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL

PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

OptoPulse EIL580. The benchmark for incremental encoders.

OptoPulse EIL580. The benchmark for incremental encoders. OptoPulse EIL580 The benchmark for incremental encoders. OptoPulse EIL580 the established standard. OptoPulse EIL580 sets a benchmark in incremental encoders with 58 mm diameter. Cutting edge sensing technology

More information

Absolute encoders - modular bus covers

Absolute encoders - modular bus covers BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP

More information

Incremental Encoder with Hollow Shaft

Incremental Encoder with Hollow Shaft Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow

More information

Material: Weight: Shaft Loads: Cable: Connector:

Material: Weight: Shaft Loads: Cable: Connector: Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting

More information

Inclination sensors 2-dimensional, measuring range up to ±90

Inclination sensors 2-dimensional, measuring range up to ±90 Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical

More information

HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings

HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The

More information

ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL

ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.

More information

Inclination sensors 1-dimensional, measuring range

Inclination sensors 1-dimensional, measuring range Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor

More information

Encoders Absolute Singleturn Encoder Types A58CS8

Encoders Absolute Singleturn Encoder Types A58CS8 Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion

More information

Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP

Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability

More information

DATA SHEET ABSOLUTE ROTARY ENCODER SSI

DATA SHEET ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -

More information

Multiturn absolute encoder

Multiturn absolute encoder Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means

More information

TECHNICAL DATASHEET Absolute Motorfeedback Series AD 34

TECHNICAL DATASHEET Absolute Motorfeedback Series AD 34 For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating

More information

Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP

Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable

More information

Rotary Measurement Technology Absolute Encoders, Multiturn

Rotary Measurement Technology Absolute Encoders, Multiturn -40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection

More information

Ø 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial)

Ø 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial) ABSOLUTE ENCODERS AMT58 SSI Multi-turn Line Standard dimension Ø58mm Hollow or solid shaft Very high resolution Very high accuracy APPLICATIONS -Motion control -Automated machinery -Length measurement

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10 Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides

More information

RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e

RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore

More information

Rotary Position Technology Absolute Encoders, Singleturn

Rotary Position Technology Absolute Encoders, Singleturn -20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:

More information

NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI

NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears

More information

Rotary Measurement Technology Absolute Encoders, Singleturn

Rotary Measurement Technology Absolute Encoders, Singleturn -20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10 Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction

More information

Rotary Measurement Technology Absolute Encoders, Singleturn

Rotary Measurement Technology Absolute Encoders, Singleturn -40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable

More information

Absolute Shaft Encoders ACURO industry

Absolute Shaft Encoders ACURO industry Compact design Aids for start up and operation: diagnostic LED, preset key * with optical response, status information Output Tristate short circuit-proof Gray or Binary code Encoder monitoring Synchro

More information

ABSOLUTE ROTARY ENCODER MIDI CANOPEN

ABSOLUTE ROTARY ENCODER MIDI CANOPEN Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary

More information

Multiturn absolute encoder

Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to

More information

MHAD 50 - HDmag. Features

MHAD 50 - HDmag. Features MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust and wearless Protection IP 67 Large

More information

ABSOLUTE ROTARY ENCODER INTERBUS

ABSOLUTE ROTARY ENCODER INTERBUS Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42

More information

Type SCA94DD. Wind Power / Direct Drive

Type SCA94DD. Wind Power / Direct Drive Wind Power / Direct Drive Type SCA94DD Specifically made for measurement of Speed and Position on slow revolving Direct Drive Generators on Wind Turbines High Resolution of Speed and Position High Update

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet

TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical

More information

ENC-IQ58S-H-PROG-ZCW-4-06-A-L1

ENC-IQ58S-H-PROG-ZCW-4-06-A-L1 IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible

More information

Absolute Shaft Encoders ACURO industry

Absolute Shaft Encoders ACURO industry bsolute Shaft Encoders CURO industry Type C 58 Synchro flange Compact design: 5mm length for single or multiturn ids for start up and operation: diagnostic LED, preset key with optical response, status

More information

Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet

Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only

More information

TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63

TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63 AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance

More information

Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track

Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,

More information

SSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS

SSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10 Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description

More information

Rotary Measurement Technology Absolute Encoders, Multiturn

Rotary Measurement Technology Absolute Encoders, Multiturn -40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus

TECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft

More information

Standard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible

Standard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and

More information

Shaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump:

Shaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump: Explosion Proof / Absolute Type EXAG - Ethernet Non removable end cap delivered with cable Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Ethernet - TCP/IP and MODBUS TCP communication

More information

Inductive displacement measurement system model series IE25P with programmable analogue interface

Inductive displacement measurement system model series IE25P with programmable analogue interface Inductive displacement measurement system Document No.: IE 12781 BE Date: 05.01.16 Contactless, wear-free sensor system Analogue interface Measuring range programmable Measuring range up to 0 mm Stainless

More information

OptoPulse EIL580. The new benchmark for incremental encoders

OptoPulse EIL580. The new benchmark for incremental encoders OptoPulse EIL580 The new benchmark for incremental encoders OptoPulse EIL580 the new benchmark. OptoPulse EIL580 encoders set a benchmark in incremental encoders with 58 mm diameter. Cutting edge sensing

More information

MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER

MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature

More information

Optical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH

Optical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable

More information

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900 NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in

More information

ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL

ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps

More information

ABSOLUTE ROTARY ENCODER ETHERNET/IP

ABSOLUTE ROTARY ENCODER ETHERNET/IP Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824

More information

ENC-CKP58-H-PROG-ZCW-4-06-A-L1

ENC-CKP58-H-PROG-ZCW-4-06-A-L1 IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of

More information

TECHNICAL DATASHEET Stainless Steel Encoders AC 59 / 61 - Parallel

TECHNICAL DATASHEET Stainless Steel Encoders AC 59 / 61 - Parallel Version AC 59 with cable outlet Compact design Protection class IP67 High corrosion resistance Robust design Resolution up to 26 Bit (14 Bit ST, 12 Bit MT) Gray or Binary code Encoder monitoring Output

More information

The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.

The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business

More information

Rotary Measuring Technology

Rotary Measuring Technology --20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones

More information

Complete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line

Complete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can

More information

Rotary Measuring Technology Absolute singleturn encoder shaft version

Rotary Measuring Technology Absolute singleturn encoder shaft version Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various

More information

Absolute encoders multiturn

Absolute encoders multiturn PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these

More information

Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing

Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral

More information

Encoder WDG 40E.

Encoder WDG 40E. Encoder WDG 0E www.wachendorffautomation.com/wdg0e Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

ROTARY ENCODERS FOR FEEDBACK APPLICATIONS PRODUCTS CATALOGUE. w w w. ems-i.co.uk

ROTARY ENCODERS FOR FEEDBACK APPLICATIONS PRODUCTS CATALOGUE. w w w. ems-i.co.uk ROTARY ENCODERS FOR FEEDBACK APPLICATIONS PRODUCTS CATALOGUE w w w. ems-i.co.uk SHAFTED ROTARY ENCODERS ARS-5 / ARC-5 Series Body Size - 50mm ( Standard ) ARS ARC Series Incremental Rotary Encoders Small

More information

Encoder WDG 58A.

Encoder WDG 58A. Encoder WDG www.wachendorffautomation.com/wdga Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum

More information

ENCODER. Profibus Multiturn. Series , Key-Features:

ENCODER. Profibus Multiturn. Series , Key-Features: ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm

More information

Data Sheet MEM 22. Absolute Encoder Multiturn

Data Sheet MEM 22. Absolute Encoder Multiturn Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS

More information

DATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939

DATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939 POSITAL absolute magnetic rotary encoders are available with interface. These heavy duty encoders are designed for mobile machinery and other demanding environments. An IP69K environmental rating results

More information

MAGNETIC ABSOLUTE MULTITURN

MAGNETIC ABSOLUTE MULTITURN MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,

More information

PARALLEL GENERAL INFORMATION PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS. BCD Code 2nd decade 1st decade. Dec Binary Code Gray Code

PARALLEL GENERAL INFORMATION PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS. BCD Code 2nd decade 1st decade. Dec Binary Code Gray Code GENERAL INFORMA PARALLEL PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS The absolut encoders are widely employed throughout industry. Unlike incremental measurement systems, absolut encoders always

More information

Shaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:

Shaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump: Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site

More information

Linear Position Transducer HLT 1000-R2

Linear Position Transducer HLT 1000-R2 7 Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and

More information

Encoder WDG 115T - Discontinued product

Encoder WDG 115T - Discontinued product Encoder WDG T Discontinued product www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and

More information

Encoder WDG 40A.

Encoder WDG 40A. Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Encoder WDG 40A.

Encoder WDG 40A. Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental

bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental

More information

Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:

Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump: Encoder Description EXAG SSI / Hollow Shaft EXAG SSI Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm and Ø 16 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits for on-site

More information

DSM5H & DSO5H MODELS SIL3 PLe INCREMENTAL ENCODERS

DSM5H & DSO5H MODELS SIL3 PLe INCREMENTAL ENCODERS & MODELS SIL3 PLe INCREMENTAL ENCODERS Features Usable up to SIL3 and Cat.4 / PLe according to IEC 61508 / EN ISO 13849 Suitable for safe motor feedback according to IEC 61800-5-2 Robustness and excellent

More information