* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty.

Size: px

Start display at page:

Download "* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty."

Jasmin Henderson
6 years ago
Views:

1 Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke (standard yoke included) Stainless steel hardware Silicone sealing devices Clear tempered glass Dual chamber design for heat management and ease of maintenance Electro-statically applied polyester powder coat finish 5.44 kg / 12 lbs IP66 IK10 rated EPA: Front = 0.94 sq. ft. / sq. m. Side = 0.56 sq. ft./ sq. m. Meets 3G ANSI C Vibration standard for bridge applications Corrosion-resistant coating for hostile environments* Performance : Minimum 1fc ( feet (107m) distance (DWH full output, 6 optic) Dynamic Warm variable color temperature: 36 LEDs (12x 2200K, 12x 2700K, 12x 3000K) Dynamic White variable color temperature: 36 LEDs (12x 2700K, 12x 4000K, 12x 6500K) 6, 10, 20, 40 or 60 optics available Lumen maintenance 120,000 hrs 25 C] Lumen measurements comply with LM standard Operating temperatures: -25 C to 50 C [-13F to 122F] Electrical : Line voltage luminaire for 100 to 277V Power and data in 1 cable, 3ft cord (#16-5) 50 watts Dimming options: dim to warm via 0-10V (DWW only), DMX/RDM enabled dim to warm via single channel (DWW only) or DMX/RDM enabled 3-channel color temperature control DMX/RDM 3-channel control 6 Optic (VN) DWW DWH Delivered Output [lm] CERTIFICADO No.05884, Intensity [peak cd] 2,333 99,283 2, ,836 RETILAP Power [W] IK10 CCT* [K] 2,600 4,000 Dim to Warm via DMX/RDM Single channel control (DMX/RDM1) DWW 1,570 84, ,700 Dim to Warm via 0-10V (DIM/DTW) DWW 1,558 83, , " [121mm] 0 *Tested at full output " [257mm] 70 10" [254mm] " [378mm] 90 Standard Yoke (as shown, included) * Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 160 Standard Yoke Mounting Adjustable pivot limits 1/8

2 MOUNTING OPTIONS " [121mm] " [257mm] " 10" [254mm] [286mm] SY Short Yoke Mounting Short Yoke mounting adjustable pivot limits 109 3" [76mm] 5 16 " 8mm 7 16 " [11mm] Standard and Short Yoke mounting holes Pattern OPTICAL OPTIONS *Factory installed LSLH Linear Spread Lens Horizontal distribution (not adjustable on site) LSLV Linear Spread Lens Vertical distribution (not adjustable on site) Factory installed, available for 6 to 40 optics. See Optical Accessories for field adjustable spread lens. 2/8

3 ACCESSORIES Order separately Mounting Accessories 20 1 " 16 [509mm] PM4-1, PM4.5-1, PM5-1 Round Pole Mounting accessory single fixture " " [185mm] [131mm] " [55mm] PM4-2, PM4.5-2, PM5-2 Round Pole Mounting accessory twin fixtures PM4 Round Pole Mounting Accessory Shown *Consult factory for square pole section When PM4-2, PM4.5-2 or PM5-2 are specified, one bracket assembly is supplied per 2 fixtures unless otherwise specified. 4" [102mm] " [149mm] TN2 Tenon adapter to fit on 2 3/8 O.D. tenon " [64mm] 4" [102mm] " [149mm] TN4 Tenon adapter to fit on 4 O.D. tenon " [105mm] 3/8

4 ACCESSORIES - continued Order separately Optical Accessories: LBL-SN- -BK *Interior surface painted black. LBL-SNW- -BK *Interior surface painted black. LBL-VS- -BK *Interior surface painted black. Snoot accessory. Please specify desired exterior finish : Snoot Wide accessory. Please specify desired exterior finish : Visor accessory. Please specify desired exterior finish : LBL-WG- Wire Guard accessory. Please specify desired exterior finish : LBL-LSLA- Linear Spread Lens Adjustable accessory. Please specify desired exterior finish : Accessory combinations: + Snoot Snoot Wide Visor Wire Guard Snoot NO NO NO YES Visor NO NO NO YES Linear Spread Lens Adjustable YES YES YES NO Accessory combinations must be ordered together on a single line. Ex: A Snoot + Wire Guard combination order code is LBL-SNWG-BK-BK. 4/8

5 ACCESSORIES - continued Order separately Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 512 controller keypad. Lumencue is a USB / mini SD DMX 512 controller. LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. 5/8

6 TYPICAL WIRING DIAGRAMS Dimming Version (DIM/DTW* - Dim to Warm via 0-10V) *Available for DWW version only, 2700K to 2200K American Color Code CE Color Code USE Green Yellow/Green Ground Black Brown Live V White Blue Neutral Red/Purple Black 0-10V / Data + Orange Grey 0-10V / Data V #16-5 Power & data cable JBOX From dimmer Dimmer Data+ red Data- orange V To fixture To next fixture Junction box Line black Ground green Neutral white Wire-nuts Maximum run length by 15A 120V: 16 LBL (16AWG cable), 10 on center spacing. 200 max cable length. 0-10V ma Ratings: Passive Dimmer (Current Sink): 3mA per fixture Active Dimmer (Current Source): 0.5mA per fixture 6/8

7 lumenbeam Specification Sheet TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM1*, DMX/RDM) *Available for DWW version only, 2700K to 2200K #16-5 Power & data cable JBOX lumenterminator (use at the end of each run only) USE Green Black White Red/Purple Orange Yellow/Green Brown Blue Black Grey Ground Live V Neutral 0-10V / Data V / Data - Lumentouch V Data input To Fixture Line black Ground green Neutral white V 16 LBL (16AWG cable) max. per CBX-ST, 10 on center spacing. 6 outputs max. per CBX-ST. 200 max. total cable length per CBX-ST (based on a 15A 120V) Wire-nuts Junction box DMX terminator is required at the end of each run to maintain data integrity. (2x) DMX lumenterminator included per CBX-DS (6x) DMX lumenterminator included per CBX-ST See installation instructions for details. Daisy Chain Layout (DMX/RDM1*, DMX/RDM) *Each fixture requires 3 addresses. *Available for DWW version only, 2700K to 2200K CBX-DS CE Color Code CBX-ST Data- orange Data+ red From fixture or CBX American Color Code #16-5 Power & data cable V Data input lumenterminator (use at the end of each run only) Lumentouch V Data- orange Data+ red From fixture or CBX To Fixture Line black Ground green Neutral white Wire-nuts Junction box 16 LBL (16AWG cable) max. per CBX-DS, 10 on center spacing. 2 outputs max. per CBX-DS. 200 max. total cable length per CBX-DS. (based on a 15A 120V) *Each fixture requires 3 addresses. 7/8

8 HOW TO ORDER LBL Housing: Optical Option: 2 LBL - Lumenbeam Large Voltage: LSLH - Linear Spread Lens Horizontal distribution LSLV - Linear Spread Lens Vertical distribution *Factory installed, available for 6 to 40 optics. See Optical Accessories for field adjustable spread lens volts volts volts volts volts volts Colors and Color temperatures: DWW - Dynamic warm white color temperature ranging from 2200K to 3000K. DWH - Dynamic white color temperature ranging from 2700K to 6500K. Optic: VN - Very Narrow 6 NS - Narrow Spot Finish: BK - Black Sandtex CC - Custom (please specify RAL color) Control: DIM/DTW - Dim to Warm via 0-10V, 2700K to 2200K (10% minimum dimming value)* DMX/RDM1 - Dim to Warm via single-channel DMX/RDM, 2700K to 2200K (1% minimum dimming value)* DMX/RDM - 3-channel color temperature control via DMX/RDM *Available for DWW version only. NF - Narrow Flood 20 8 Option: FL - Flood 40 SY - Short Yoke 3GV - 3G ANSI C Vibration Rating CRC - Corrosion-resistant coating for hostile environments WFL - Wide Flood 60 8/8

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year warranty.

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year warranty. Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Steel formed yoke (standard yoke included) Stainless steel hardware Silicone