Connectors, adapters, and tools
|
|
|
- Andrea Gregory
- 6 years ago
- Views:
Transcription
1 Model Name Use With: 213-CON Rear Panel Mating Connector , , , , BAN-3A Triax to Banana Plug 4200-SCS, 7072, 7072-HV, DMMs 237-BNC-TRX 237-TRX-BAR 237-TRX-NG 237-TRX-T 3-Lug Female Triax to Male BNC Connector with guard disconnected 3-Lug Triax Female to Female Barrel Adapter Triax Male-Female Adapter with guard disconnected 3-slot Male to Dual 3-Lug Female Triax Tee Adapter 4200-SCS, 6517A, 6517B, 7078-TRX cables 2635B, 2636B, 4200-SCS, 6482, Triax interconnect 6517A, 6517B, 7072, 7072-HV 4200-SCS, 7072, 7072-HV, 7078-TRX cables 237-TRX-TBC 3-Lug Female Triax Bulkhead Connector 7072, 7072-HV, 7078-TRX cables A Silver Solder for use with 2182-KIT 2182A 2182-KIT Low-Thermal Connector with Strain Relief (LEMO) 2182A, SC Low-Thermal Calibration Shorting Plug 2182A 2499-DIGIO Digital I/O Expansion Module SourceMeter SMU instruments 2500INT-SMA SMA Connector 2500INT integrating sphere 2500INT-FC/PC FP/PC Connector 2500INT integrating sphere 2500INT-FC/APC FP/APC Connector 2500INT integrating sphere 2600-KIT Screw Terminal Connector with Strain Relief and Cover 2601B, 2602B (2 needed), 2611B, 2612B (2 needed) Model Name Use With: 7015-ST Extra Screw Terminal Board 7015-S 7018-ST Extra Screw Terminal Board 7018-S 7072-TRT Triax Removal Tool 707B, 708B 7074-CIT Contact Extraction Tool 7152-KIT, 7152-MTR 7078-CIT Contact Insertion/Extraction Tool 7078-KIT, 7078-MTR, 7152-KIT, 7152-MTR 7078-HCT Hand Crimping Tool for 7078-KIT, 7169-KIT 7078-KIT 7078-KIT Connector Kit 7071, , 7074-D, 7078-MTR 7078-MTR 7078-TRX-BNC 7078-TRX-GND 7078-TRX-TBC Mass Terminated Receptacle, Bulkhead Mount 3-slot Male Triax to BNC Adapter 3-slot Male Triax to BNC Adapter (guard removed) 3-Lug Female Triax Bulkhead Connector w/cap 7071, , 7078-KIT, 7078-MTC 4210-CVU, 4801, 6482, 6487, 6514, 6517A, 6517B, 7072, 7072-HV 4200-SCS, 4801, 6517A, 6517B, 7072, 7072-HV, Series 2600B 7078-TRX cables 7152-HCT Hand Crimp Tool for 7152-KIT, 7152-MTR 7152-KIT, 7152-MTR 7152-KIT 6-Position M-Series Plug w/contacts 7152, 7152-MTR 7152-MTR 6-Position M-Series Receptacle w/sockets 7152, 7152-KIT, 7152-MTC-2, 7152-MTC A DB50 Male Connector Kit 7701, 7703, 7705, TRIAX 3-Lug Triax Adapter 2601B, 2602B (2 needed), 2604B, 2611B, 2612B (2 needed), 2614B 2657A-LIM-3 Low Interconnect Module 2657A 2657A-PM V Protection Module 2657A 3706-BKPL Analog Backplane Extender Board Series 3700A A DB25 Male Connector Kit 7701, 7707, 7709, Series 2600B 7712-SMA-N Female SMA to Male N-Type Adapter 7711, Ω Feed-Through Terminator RG 58 cable, 776, pin D Subconnector Kit 7703, 7705, 77XX, modules with D sub connectors 3720-ST Screw Terminal Block ST Screw Terminal Block ST Screw Terminal Block ST-1 Screw Terminal Block ST Screw Terminal Block ST Screw Terminal Block ST Screw Terminal Block ST Screw Terminal Block ST Screw Terminal Block KIT50-R 50-pin Female D-sub Connector Kit 3721, 3730, 3731, 3740, CIT Contact Insertion and Extraction Tool 3720, 3722, KIT78-R 78-pin Female D-sub Connector Kit 3720, 3723, 3724, KIT104-R 104-pin Male D-sub Connector Kit KIT104-R/F 104-pin Female D-sub Connector Kit BNC Shorting Plug Instruments with BNC connectors slot Male to 2-Lug Female Triax Adapter 2-lug triax connectors slot Male to 3-Lug Female Triax Adapter 7065, 2500INT 7001-PNL Metal Plate KIT-R Female 96-pin Connector Kit 7011-C, 7012-C, 7013-C, 7015-C, 7018-C 7011-ST Extra Screw Terminal Board 7011-S 7012-ST Extra Screw Terminal Board 7012-S 7013-ST Extra Screw Terminal Board 7013-S pin Male and 25-pin Male D-Shell Connector Kit 7701, pin Male, 50-pin Female, and 25-pin 7701, 7703, 7705, 7707, 7709 Male IDC D-Shell Connector Kit 8610 Low Thermal Shorting Plug 2000, 2001, 2002, Wire DMM Shorting Plug 2000, 2001, 2002, 2010, 2015, 2016, 2100, 2110, Series 2400, Series 2700, Series 3700A 8680 RTD Probe Adapter 2001, 2002, 2010, 2110 BG-18 Dual Banana to BNC Coaxial Adapter Series 2000, 2100, 2110, Series 2400, 2700, 2750 CAP-18 Protective Shield/Cap BNC, 2-lug triax connectors CAP-31 Protective Shield/Cap 3-lug triax connectors CA-573-3A1 4-Pin Round Interlock Cable, Unterminated 2657A-LIM-3 CS-400 DB25 Male Solder Cup CA cable, 213 CS-458 Interlock Connector Kit 6517-ILC-3 CS-565 BNC Barrel, 4200-SCS BNC interconnect CS Lug Female Triax Bulkhead Connector 6487, 6517A, 6517B CS Lug Male Triax Cable Mount Connector 4200-SCS, SC-22 cable CS-701 BNC Tee Adapter (Female-Male-Female) 4200-SCS CS Lug Triax Jack Receptacle 4200-SCS CS-846 Screw Terminal Test Lead Connector 230X, 2510, 2510-AT CS-970 High Voltage Bulkhead Connector 248, 248-SHV cable
2 Model Name Use With: CS-1247 SMA Female to BNC Male Adapter 4200-SCS Model Name Use With: CS Screw Terminal Plug 2651A CS-1249 SMA Female to SMB Plug Adapter 4200-SCS CS Screw Terminal Receptacle 2651A CS-1251 BNC Female to SMB Plug Adapter 4200-SCS CS Screw Terminal Connector 2651A CS-1252 SMA Male to BNC Female Adapter 4200-SCS CS-1281 SMA Female to SMA Female Adapter 4200-SCS CS-1305 Interlock Connector 6517B CS-1390 Male LEMO Triax to Female SMA Adapter 4200-SCS CS-1391 SMA Tee Adapter (Female-Male-Female) 4200-SCS CS Miniature Mating Connector 2635B, 2636B CS-1479 SMA Male to BNC Male Adapter 4200-SCS CS CS Rear Panel Mounting Connector Rear Panel Mating Connector , , , , , 2220J-30-1, , 2230J-30-1 High Voltage Triax Feed Through HV-CS A, 2600-PCT-x, 4200-PCT-x Connector/Barrel (female to female) TL-24 SMA Torque Wrench 4200-SCS, System 46, System 46T Model 213-CON Rear Panel Mating Connector: Quick disconnect, 12-screw terminal connector with handle. For use with: , , , , Model 237-BNC-TRX: Male BNC to 3-lug female triax adapter (guard disconnect ed). Terminates triax cable in BNC plug. High voltage rating for use with 7072-HV., 6517A, 6517B, TRX cables Model 237-TRX-NG: 3-slot triax to 3-lug female triax adapter (guard removed) for non-guarded mea sure ments. High voltage rating for use with 7072-HV, etc. For use with: 6517A, 6517B, 7072, 7072-HV Item shipped may vary from model pictured here. Model 237-BAN-3A Triax to Banana Plug: Triax cable center conductor ter mi nat ed in a safety banana plug (guard and shield open). For connecting DMMs and other banana jack instruments to a matrix or fixture., 7072, 7072-HV, DMMs Model 237-TRX-BAR: 3-lug triax barrel (female to female) for use with triax interconnect. For use with: 2635B, 2636B, 4200-SCS, triax interconnect Model 237-TRX-T: 3-slot male to dual 3-lug female triax tee adapter for use with 7078-TRX cables and 7072/7072-HV Semiconductor Matrix Cards. High voltage rating for use with Model 6517B Electrometer., 6517A, 6517B, 7072, 7072-HV, 7078-TRX cables
3 Model 2500INT-FC/ APC: FC/APC connector for 2500-INT Integrating Sphere. For use with: 2500-INT Model 237-TRX-TBC: 3-lug female triax bulkhead connector with cap for assembly of custom panels and interface connections. High voltage rating for use with 7072-HV, etc. Uses miniature coax cable, not triax cable, at soldered end. Bulkhead is outer shield. For use with: 7072, 7072-HV, 7078-TRX cables Model A: Silver solder for making connections in experiments with the Model 2182A. 20 ft roll. For use with: 2182A Model 2188 Low-Thermal Calibration Shorting Plug: A low-resistance, low- t hermal shorting plug required to calibrate the Model 2182A Nanovoltmeter. Made of a LEMO connector with its pin connectors shorted together using copper wire and Sn/Ag4 silver solder. For use with: 2182A Model 2500INT-FC/ PC: FC/PC connector for 2500-INT Integrating Sphere. For use with: 2500-INT Model 2500INT- SMA: SMA connector for 2500-INT Integrating Sphere. For use with: 2500-INT Model 2182-KIT Low-Thermal Connector with Strain Relief: Connector kit for building a custom input cable for the Model 2182A Nano voltmeter. Includes a low-thermal (LEMO) connector and a strain relief. Model 2499-DIGIO: Digital I/O expansion module that plugs onto the DB-9 connector of a SourceMeter SMU instrument. Expands the three digital I/O lines of the SourceMeter to 16 lines. The SOT, EOT/BUSY, 5V, GND, and Interlock signals are passed through. Services Available: 1-year factory warranty extended to 3 years from date of shipment For use with: SourceMeter SMU Instruments Model 2600-KIT: Screw terminal connector kit with extra screw terminal connector, strain relief, and cover for a single SourceMeter channel (two needed for use with Models 2602B, 2612B, and 2614B). For use with: 2601B, 2602B, 2604B, 2611B, 2612B, 2614B, 2651A For use with: 2182A, SC-93 Model 2600-TRIAX: Triax adapter for a single Series 2600B SourceMeter channel (two needed for use with Models 2602B and 2612B). For use with standard 3-lug triax cables. For use with: 2601B, 2602B, 2611B, 2612B
4 Model 2657A-LIM-3: Low Interconnect Module for use with 2657A, HV triax cables (3kV rated). For use with: Series 2657A Model 3720-ST: Screw Terminal Block. Required with the Model 3720 for automatic CJC thermocouple measurements. For use with: 3720 Model 3723-ST-1: Screw Terminal Block. Accessory for the Model 3723 for single-pole applications. For use with: A-PM-200: 200V protection module to protect standard triax instruments from 2657A, standard and HV triax cables (3kV rated). For use with: Series 2657A Model 3721-ST: Screw Terminal Block. Required with the Model 3721 for automatic CJC thermocouple measurements. Model 3724-ST: Screw Terminal Block. For use with: 3724 For use with: 3721 Model 3706-BKPL: Analog backplane extender board, 15-pin D-sub to terminal block. For use with: Series 3700A Model 3730-ST: Screw Terminal Block. Model 3723-ST: Screw Terminal Block. Accessory for Model 3723 for two-pole applications. For use with: 3723 For use with: 3730
5 Model 3731-ST: Screw Terminal Block. For use with: 3731 Model 3740-ST: Screw Terminal Block. For use with: 3740 Model 3791-CIT: Contact insertion and extraction tool for assembly and maintenance of Series 3700A D-sub Connector kits. For use with: 3791-KIT78-R, 3791-KIT104-R Model 3732-ST-C: Screw Terminal Block. Enables screw terminal access and additional matrix sizes including: quad 4 28 (1W), dual 4 28 (2W), single 4 56 (2W), dual 4 56 (1W), and single (1W). Model 3750-ST: Screw Terminal Block. For use with: 3750 Model 3791-KIT78-R: 78-pin female D-sub connector kit that contains two female D-sub connectors and 156 solder-cup contacts. Use for assembly of custom cable and harnesses compatible with Series 3700A plug-in cards. For use with: 3720, 3723, 3724, 3732 For use with: 3732 Model 3732-ST-R: Screw Terminal Block. Enables screw terminal access and additional matrix sizes including: dual 8 28 (1W), single 8 28 (2W), and single (1W). For use with: 3732 Model 3790-KIT50-R: 50-pin female D-sub connector kit that contains two female D-sub connectors and 100 solder cup contacts. Use for assembly of custom cable and harnesses compatible with Series 3700A plug-in cards. For use with: 3721, 3730, 3731, 3740, 3750 Model 3792-KIT104-R: 104-pin male D-sub connector kit that contains two male D-sub connectors with housings and 208 solder-cup contacts. Use for assembly of custom cable and harnesses compatible with Series 3700A plug-in cards. For use with: 3722
6 Model 3792-KIT104-R/F: 104-pin female D-sub connector kit that contains two female D-sub connectors with housings and 208 solder-cup contacts. Use for assembly of custom cables, harnesses, and DUT interface compatible with Series 3700A plug-in cards. For use with: 3722 Model 6172: 2-slot male to 3-lug female triax adapter. For use in adapting Models 7065 and 250INT inputs to 3-slot triax plugs. For use with: 2500INT, 7065 Model 7011-ST: Extra quick disconnect screw terminal board. One 7011-ST is included with each 7011-S. For use with: 7011-S Model 4851: BNC shorting plug. For use with: Instruments with BNC connectors Model 7001-PNL: Metal plate used to cover an empty card slot on the rear panel of a Model For use with: 7001 Model 7012-ST: Extra quick disconnect screw terminal board. One 7012-ST is included with each 7012-S. For use with: 7012-S Model 6171: 3-slot male to 2-lug female triax adapter. For use with: 2-lug triax connectors Model 7011-KIT-R: 96-pin female DIN con nector with solder eyelets and strain relief. This kit can be used for assembly of custom cables to connect with the con nec tors on the 7011-C, 7012-C, 7013-C, 7015-C, and 7018-C switch cards. Also con nects with the 7011-MTR bulkhead mount male connector. For use with: 7011-C, 7012-C, 7013-C, 7015-C, 7018-C Model 7013-ST: Extra quick disconnect screw terminal board. One 7013-ST is included with each 7013-S. For use with: 7013-S
7 Model 7015-ST: Extra quick disconnect screw terminal board. One 7015-ST is included with each 7015-S. For use with: 7015-S Model 7074-CIT: Contact extraction tool for removal of contacts from cables and con nectors. For use with: 7152-KIT, 7152-MTR Model 7078-KIT: 38-pin male plug assembly with strain relief and 40 con tacts for assembly of custom cable and harnesses compatible with Model Matrix Card, Model Dual 4 12 Matrix Card, and 7078-MTR Mass Termi nat ed Receptacle. Re quires 7078-HCT; recommend 7078-CIT. For use with: 7071, , 7074-D, 7078-MTR Model 7018-ST: Extra quick disconnect screw terminal board. One 7018-ST is included with each 7018-S. For use with: 7018-S Model 7078-CIT: Contact insertion and ex traction tool for assembly and main te nance of 7078-MTC cables and connec tors. For use with: 7078-KIT, 7078-MTR, 7152-KIT, 7152-MTR Model 7078-MTR: 38-pin female bulkhead mount re cep ta cle with 40 contacts for custom interface and patch panels compatible with 7078-MTC and 7078-KIT. Requires 7078-HCT; recommend 7078-CIT. Model 7072-TRT: Triax removal tool used to connect or disconnect triax style connectors when clearance is limited making it difficult to mate or unmate a connector with your fingers. For use with: 707B, 708B Model 7078-HCT: Contact crimping pliers for as sem bly of cables and connectors using 7078-MTR or 7078-KIT. For use with: 7078-KIT For use with: 7078-KIT, 7078-MTC, 7071, Model 7078-TRX-BNC: 3-slot male triax to BNC adapter for use with 7072 Semi con duc tor Matrix Card and 4801 cables. For use with: 4210-CVU, 4801, 6482, 6487, 6514, 6517A, 6517B, 7072, 7072-HV
8 Model 7078-TRX-GND: 3-slot male triax to female BNC adapter (guard removed) for adapting non-guarded measurements to the Model 7072 or 7072-HV Semi con duc tor Matrix Cards or 8006 or 8008 Test Fixtures. For use with: Series 2600B, 4801, 6517A, 6517B, 7072, 7072-HV Model 7152-KIT: 6-pin plug assembly with strain relief and contacts for assembly of custom cable and harnesses compatible with Model Low Current Matrix Card and 7152-MTR Mass Terminated Receptacle. Requires 7152-HCT recommend 7074-CIT and 7074-HCT. For use with: 7152, 7152-MTR Model A: DB25 male connector kit (solder cup) with shell. For use with: 7701, 7707, 7709, Series 2600B Model 7712-SMA-N: Female SMA to male N-type adapter. Model 7078-TRX-TBC: 3-lug female triax bulkhead connector with cap for assembly of custom panels and in ter face connections. For use with: 7078-TRX Cables Model 7152-MTR: 6-pin bulkhead mount re cep ta cle with contacts for custom in ter face and patch panels com pat i ble with 7152-MTC and 7152-KIT. Re quires 7152 HCT; re commend 7074-CIT and 7074-HCT. For use with: 7711, 7712 For use with: 7152, 7152-KIT, 7152-MTC-2, 7152-MTC-10 Model Ω Feed-Through Ter mi na tor: BNC-to-BNC adapter for ter mi nat ing RG58 cable in its characteristic impedance. VSWR <1.1, DC 250MHz. Model 7152-HCT: Contact crimping pliers for as sem bly of cables and con nec tor using 7152-MTR or 7152-KIT. For use with: 7152-KIT, 7152-MTR Model A: DB50 male connector kit (solder cup) with shell. For use with: RG58 Cable, 776, 3390 For use with: 7701, 7703, 7705, 7709
9 Model 7788: 50-pin D subminiature connector kit. To mate with 50-pin connector on Model 7703 and For use with: 7703, 7705, 77xx modules with D-sub connectors Model 8610 Low Thermal Shorting Plug: For cal i bra tion lab use, this plug provides a very low thermal offset short at front or rear inputs. For use with: All DMMs BG-18: Dual banana to BNC coaxial adapter for adapting connection on instrument with dual banana jack. For use with: All DMMs, Series 2400 CAP-18: Protective shield/cap for BNC connectors. For use with: BNC connectors Model 7789: 50-pin/25-pin (both male) D-Shell Kit (one of each) for 7701 or 7709 Integra modules (mating connectors are supplied with these modules when purchased). For use with: 7701, 7709 Model 8620 Four-Wire DMM Shorting Plug: Provides a low resistance 4-wire short to both observe and cancel DMM offset resistances and voltages to improve measurement accuracies. For use with: All DMMs, Series 2400, Series 2700, Series 3700A CAP-31: Protective shield/cap for 3-lug triax connectors. For use with: 3-lug triax connectors CS-400: DB25 male solder cup. For use with: C126-1 cable, 213 Model 7790: 50 pin male, 50 pin female, 25 pin male IDC D-Shell Connector Kit (one each). For use with: 7701, 7703, 7705, 7707, or 7709 Integra modules Model 8680 RTD Probe Adapter: Provides a means of connecting RTD probes terminated in either a 4-wire in stru men ta tion connector or bare wires to safety input jacks on a 0.5 inch spacing. For use with: 2001, 2002, 2010, 2100, 2110, 8681 CS-458: Interlock connector kit to mate with 6517-ILC-3. For use with: 6517-ILC-3
10 CS-565: Female BNC to female BNC adapter with 50Ω nominal impedance., BNC in tercon nect CS-630: 3-lug female triax bulkhead connector for soldered connection. Mates with CS-631. For use with: Fixtures, 6487, 6517A, 6517B CS-719: 3-lug triax jack receptacle. CS-846: Eight position connector with screw terminals for connection to test leads. For use with: 230x, 2510, 2510-AT CS-1251: BNC female to SMB plug adapter CS-1252: SMA male to BNC female adapter CS-631: 3-slot male triax cable mount con nec tor for use with SC-22 cable. Mates to Models 7072, and 8006., SC-22 cable CS-970: High voltage bulkhead connector. For use with: 248, 248-SHV cable CS-1281: SMA female to SMA female adapter CS-1247: SMA female to BNC male adapter CS-701: BNC tee adapter (female, male, female). CS-1249: SMA female to SMB plug adapter CS-1305: Interlock connector to mate with Model 6517B. For use with: 6517B
11 CS-1390: Male LEMO triax to female SMA adapter CS : 2-pin male screw terminal connector plug. Rated 50A. Mates with the Model CS screw terminal block. For use with: 2651A CS : 15-pin rear panel output connector. For use with: , 2220J-30-1, , 2230J-30-1 CS-1391: SMA tee adapter (female-male-female) CS : 2-pin female screw terminal connector block. Rated 50A. Mates with Model CS screw terminal connector. For use with: 2651A HV-CS-1613: High voltage triax feed through connector/barrel (female to female) (3kV rated). For use with: For use with: 2600-PCT-x, 2657A, 4200-PCT-x CS : Miniature mating connector used as a ground connector for the Models 2635B and 2636B. For use with: 2635B, 2636B CS : 8-pin female cable termination block. For use with: 2651A TL-24: SMA torque wrench, System 46, System 46T Distribution in the UK & Ireland CS-1479: SMA male to BNC male adapter. CS : 12-pin rear panel output connector. For use with: , , , , Lambda Photometrics Limited Lambda House Batford Mill Harpenden Herts AL5 5BZ United Kingdom E: info@lambdaphoto.co.uk W: T: +44 (0) F: +44 (0)
IEEE-488. included No. Yes, 1 per IEEE-488. included. channel. Yes, 1 per IEEE-488. included. channel IEEE-488. included. channel IEEE-488.
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Section 5 8/6/04 4:36 PM Page 5-8 Table 5-2: High Speed Power Supplies Model 2302 2303 2303-PJ 2304A 2306 2306-PJ 2306-VS
Test & Measurement. product catalog. Test & Measurement. product catalog. A Greater Measure of Confidence. A Greater Measure of Confidence
research n nanotechnology n semiconductor n wireless n electronic components research Test & Measurement All other trademarks and trade names are the property of their respective companies. KEITHLEY INSTRUMENTS,
Accessories KEITHLEY (U.S. only) Side Text ACCESSORIES
Accessories Test Leads and Probes.... 348 Cables... 352 Connectors, Adapters, and Tools... 364 Adapter, Cable, Prober, and Stabilizer Kits... 375 Test Fixtures.... 377 Trigger Accessories... 378 Bench
7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 2 6.
TERMINATIONS LENGTH MODEL DESCRIPTION TYPE FROM TO m ft USE WITH: 236-ILC-3 Safety Interlock Shielded twisted pair 3-pin round 3-pin round 3 10 236, 237, 238, 8007, 8008 237-ALG-2 Low Noise Input Triax
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Model 2657A-LIM-3 LO Interconnect Module
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Model 2657A-LIM-3 LO Interconnect Module User's Guide Description The Model 2657A-LIM-3 LO Interconnect
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
High Voltage Power Supplies
Source voltages up to 5kV and 10kV 1µA current measurement resolution Multi-channel programmable DC power supplies Low noise for precision sourcing and sensitive measurements; selectable filters reduce
11525A 11524A
8 Typical Configuration 11900A 11901A 11904A 8059A 1250-1159 1250-1748 85058-60007 11900C 11901C 11901D 11904C 11904D 8059C 1250-1462 85058-60009 1190A 1250-166 1250-174 11525A 11524A 11852B 11852B Option
CVU-3K-KIT. 3 kv Bias Tee Kit. Description. Parts list / October 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com CVU-3K-KIT 3 kv Bias Tee Kit Description The CVU-3K-KIT Bias Tee Kit consists of three bias tees for
Model 3724 Dual 1x30 FET Multiplexer Card
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Model 3724 Dual 1x30 FET Multiplexer Card Connection Instructions Introduction This instruction sheet
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Accessories for the Agilent B2900A Series of Precision Instruments
Accessories for the Agilent B2900A Series of Precision Instruments Agilent B2901/02/11/12A Precision Source/Measure Unit Agilent B2961/62A 6.5 digit Low Noise Power Source Catalog Table of Contents The
High Density Switch Mainframe and Cards
Cost-effective, high density switch mainframe and cards High density, half-rack switching mainframe, just 2U (3.5 in) high Differential 6 32 matrix card Differential quad 1 40 multiplexer card Analog backplane
Model 2600B-PM V Protection Module with 1 A Clamp. Description / April 2015 *PPA * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2600B-PM-1 200 V Protection Module with 1 A Clamp Description The Model 2600B-PM-1 200 V Protection
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
Keithley Instruments Customer Documentation Series 2600A UL Safety Supplement
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Keithley Instruments Customer Documentation Series 2600A UL Safety Supplement 1. Introduction The Keithley
Model 8010 High Power Device Test Fixture Interconnection Reference Guide
Model 8010 High Power Device Test Fixture Interconnection Reference Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation. Although
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
CVU-200-KIT. 200 V Bias Tee Kit. Description. Parts list / October 2014 *P A* 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com CVU-200-KIT 200 V Bias Tee Kit Description The CVU-200-KIT Bias Tee Kit consists of three 2600-RBT-200
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
Agilent USB3, Slide - 1. Agilent. USB3 Test Fixture Characterization. 10 MHz to 20 GHz March 12,
Agilent USB, Slide 1 Agilent USB Test Fixture Characterization 10 MHz to 20 GHz March 12, 2009 Agilent USB, Slide 2 Measurement Summary A prototype Agilent USB test fixture was measured using a 4port PNA,
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter Configuration Guide The world s only graphical Picoammeter/Electrometer that can confidently measure down to 0.01 fa and up to
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
Model 6485 Picoammeter Model 6487 Picoammeter/Voltage Source
www.keithley.com Model 6485 Picoammeter Model 6487 Picoammeter/Voltage Source User s Manual 6487-900-01 Rev. C / March 2011 A G R E A T E R M E A S U R E O F C O N F I D E N C E Model 6485 Picoammeter
Model 7701 Multiplexer Module
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 tek.com/keithley Model 7701 Multiplexer Module Instructions for use with DAQ6510 Introduction The 7701 32-Channel High-Speed
Model 4200-CVU-PWR. Parts Package. Introduction. PA-977 Rev. C / September 2016 *PPA-977C* 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 4200-CVU-PWR Parts Package Introduction The Model 4200-CVU-PWR C-V Power Package for both the
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter Coniguration Guide The world s only graphical Picoammeter/Electrometer that can conidently measure down to 0.01 fa and up to
UHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
Model GHz 50 Ohm RF Module
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 tek.com/keithley Model 7711 2 GHz 50 Ohm RF Module Instructions for use with DAQ6510 Introduction The 7711 plug-in module provides
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
MTC High-Performance Modular Rectangular Connectors with Removable Contacts
Introduction Product Facts Low-profile rectangular design for high packaging density Environmental sealing for aerospace applications Modular components for design versatility and logistics savings Lightweight
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
Agilent B1505A Power Device Analyzer/ Curve Tracer
Agilent B1505A Power Device Analyzer/ Curve Tracer Configuration and Connection Guide Agilent Technologies Notices Agilent Technologies, Inc. 2009, 2010, 2011, 2012 No part of this manual may be reproduced
This Datasheet is for the IC693CBL300. I/O Bus Expansion Cables.
This Datasheet is for the IC6CBL00 I/O Bus Expansion Cables http://www.qualitrol.com/shop/p-45-ic6cbl00.aspx Provides the wiring diagrams and installation guidelines for this GE Series 0-0 module. For
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
4164 Switch Matrix System Description
On the New Frontiers of Precision A Quantum Switch for the Better Precision 4164 Switch Matrix High Density Programmable 64x64 Switch Matrix System The Precision 4164 Switch Matrix System is a reliable
Model 7705 Control Module
www.keithley.com Model 7705 Control Module User s Guide PA-696 Rev. D / October 2006 A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be
CONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
Install the Shelf and Backplane Cable
CHAPTER 1 Install the Shelf and Backplane Cable This chapter provides procedures for installing the Cisco ONS 15454. For a summary of the tools and equipment required for installation, see the Required
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
Model 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Frame Relay Cabling This section describes the cabling and connector pinouts for the Frame Relay cards.
A P P E N D I X B Cabling Summary Introduction This appendix contains details on the MGX 8850 cabling. Note In all cable references, the transmit direction is away from the switch, and the receive direction
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
DAQ Accessories Selection Guide
DAQ Accessories Selection Guide NI Cable Design Advantages National Instruments offers many different high-performance shielded cables that have been specially designed for specific NI multifunction DAQ
AXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
TEST TARGET (IEC ) Model 949 Operating Instructions
TEST TARGET (IEC61000-4-2) Model 949 Operating Instructions 8/14 1.0 DESCRIPTION The Model 949 Test Target is a current transducer that measures the discharge current waveform of an ESD pulse from an electrostatic
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
Datamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
Keysight M8000 Series BER Test Solutions
Keysight M8000 Series BER Test Solutions J-BERT M8020A High-Performance BERT M8030A Multi-Channel BERT M8040A High-Performance BERT M8041A, M8051A, M8061A, M8062A, M8045A, M8046A & M8057A Tips for Preventing
CONTENTS. Center Contact Configuration. Specifications, Materials etc Receptacles. Plug Receptacles Adapters. Convertible Adapters
CONTENTS Center Contact Configuration Specifications, Materials etc. Receptacles Plug Receptacles Adapters Convertible Adapters Connectors for Semi-Rigid Cable Connectors for Flexible Cable 3 4 5-9 10-11
CALRAD 30 series - Audio Connectors
30 series - Audio Connectors 30-607-Bk 30-607-RD Locking RCA plug for up to 8 mm wire. Locking black chrome barrel comes with black or red color ID band. Teflon insulator..35 cable LoCkiNg RCA plugs Twist
Semiconductor Switch Matrix Mainframes Six-slot and Single-slot Versions
Significantly faster commandto-connect speeds than earlier Series 700 mainframes mainframe controls a single 8 12 matrix card 707B mainframe controls up to six 8 12 matrix cards Compatible with the popular
464kB SOLID STATE SWITCH SYSTEMS. 464kB SALIENT FEATURES SYSTEM OPERATION. 464kB DESCRIPTION
SOLID STATE SWITCH SYSTEMS SALIENT FEATURES 3-stage non-blocking solid state switch matrix High density: 65,536 equivalent cross points in one mainframe sizes to meet unique requirement:, 224 x 224, 192
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
Keysight Technologies DCA Accessories. Technical Overview
Keysight Technologies DCA Accessories Technical Overview 0 Keysight DCA Accessories - Technical Overview N07A-45A Accessory Kit for Remote Head Modules Kit consists of: Quantity Part number 870-58 N07A-PB
464kC SOLID STATE SWITCH SYSTEMS. 464kc SALIENT FEATURES SYSTEM OPERATION. 464kC DESCRIPTION
464kC SOLID STATE SWITCH SYSTEMS 464kc SALIENT FEATURES 3-stage non-blocking solid state switch matrix High density: 65,536 equivalent cross points in one mainframe sizes to meet unique requirement:, 224
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
SCXI-1345 Shielded Cable
NATIONAL INSTRUMENTS The Software is the Instrument Installation Guide SCXI-1345 This guide describes how to install the SCXI-1345 shielded cable with an adapter board between an SCXI module and a data
Summary of shell housings and accessories Shell housing A Shell housing D EMC housing
Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing
ODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
2450 SourceMeter SMU Instrument
Side text Capabilities of analyzers, curve tracers, and I-V systems at a fraction of their cost. Five-inch, high resolution capacitive touchscreen GUI 0.012% basic measure accuracy with 6½-digit resolution
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
Amphenol LTW Innovation in Waterproof Solution
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Ringlock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
16 way 19 1½U enclosure with rear cable management tray NPGZM-16-NJ. ½U high front mounting cable management tray
Features: Connects 75 ohm coaxial and 120 ohm twisted pair cabling systems Supports all G.703 data rates up to 34 Mbps Snap-in modules are easy to install and maintain Field expandable and upgradable Various
Service Manual. P GHz Active Probe
Service Manual P7240 4 GHz Active Probe 071-1056-00 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
2790 SourceMeter Airbag Test System
2790 Meter Airbag Test System Single-instrument solution for continuity and hi-pot type leakage resistance measurements Programmable constant V source (50 500V) supports high speed, high resistance measurements
USBCNC USB Disk Key reader for CNC Controls Machine Mount instructions
USBCNC USB Disk Key reader for CNC Controls Machine Mount instructions 2008-2015 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla St. Chatsworth, CA 91311 www.calmotion.com Introduction This
Posi-Lok Plugs and Panels
THE SAFEST ELECTRICAL SYSTEM FOR HIGH AMPERAGE CONNECTIONS, POSI-LOK IS PART OF THE CAM-LOK FAMILY OF CONNECTORS. THE GROUND ALWAYS MAKES FIRST AND BREAKS LAST ALL POSI-LOK SYSTEMS ARE UL LISTED AND CSA
INSTRUCTION MANUAL RA 55 RACK ADAPTER RACK ADAPTER FOR MST SERIES POWER MODULES
INSTRUCTION MANUAL RA 55 RACK ADAPTER RACK ADAPTER FOR MST SERIES POWER MODULES KEPCO INC. An ISO 9001 Company. MODEL RA 55 RACK ADAPTER ORDER NO. REV. NO. IMPORTANT NOTES: 1) This manual is valid for
CAT EXT-CAT USER MANUAL.
CAT5 7500 EXT-CAT5-7500 USER MANUAL www.gefen.com ASKING FOR ASSISTANCE Technical Support: Telephone (88) 772-900 (800) 545-6900 Fax (88) 772-920 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru
Model 7700 Multiplexer Module
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 tek.com/keithley Model 7700 Multiplexer Module Instructions for use with DAQ6510 Introduction The 7700 20-Channel Differential
Catalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable