WS 201PICA. IP Wallmount Station WS 201PICA. Datasheet

Size: px

Start display at page:

Download "WS 201PICA. IP Wallmount Station WS 201PICA. Datasheet"

Brooke Porter
6 years ago
Views:

IP Wallmount Station Sub station with built-in high-performance AXIS colour video camera with high requirements on system integration.

The button can be assigned to a call number and the Label area can be used for individual labelling of the button.

IP station with one programmable, back-lit direct dialling button, back-lit label area, AXIS built-in colour video camera, electret micro phone with

1 IP Wallmount Station Sub station with built-in high-performance AXIS colour video camera with high requirements on system integration. The technology allows excellent speech quality and comprehensibility independent of background noise. The button can be assigned to a call number and the Label area can be used for individual labelling of the button. The robust construction provides full protection against water, dirt and dust. IP station with one programmable, back-lit direct dialling button, back-lit label area, AXIS built-in colour video camera, electret micro phone with multi function LED, loudspeakers 2 x 8 Ω, 3 inputs for floating contacts and 2 relay outputs (connection as make or break contact), protection classifi cation IP 65, material polycarbonate. Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 1 7

2 Technical Data Benefits Technical data IP rating: IP 65 Front panel: Microphone: Polycarbonate Omnidirectional electret microphone for max. 7 m (23 ft) speaking distance Loudspeaker: Special membrane type for optimal sound quality, sound pressure: 85 db/1 W/1 m (3.28 ft), 2 x 8 Ω Amplifier: Sound pressure: integrated class D amplifier with 2.5 W max. 99 db Handset, Headset: EM sensitivity: 14 mv eff EM impedance: 3.3 kω / EM supply: 2.5V EP level: 850 mv eff at 0 dbm0 / EP impedance: 200 Ω Input: Output: Line output: Call indication: Call button: Transmission bandwidth: 3 inputs for floating contacts (detection of 5 input states) 2 relay outputs (switch-over contacts) 30 V / 1 A for connection loudspeaker module multifunction LED (colours: red, green, blue) back-lit direct dialling button with label area Hz Operating temperature range: 25 C to 50 C ( 13 F to 122 F) Storage temperature range: 25 C to 50 C ( 13 F to 122 F) Relative humidity: Connection: Power supply: up to 95% not condensing - pluggable screw terminals - expansion plug - IP Uplink: shielded RJ 45 modular jacks PoE Cabling: min. Cat. 5 PoE (Power over Ethernet): IEEE 802.3af standard Power consumption of the terminal device: Class 0 (0.44 W to W) Protocol: Data rate: Mounting: IoIP-Protocol based on UDP/IP 10/100 MBit/s (Full/Half Duplex) flush mount kit WSFB 50P surface mount kit WSSH 50P Measurements: with flush mount kit: W 165 mm (6.5 in), H 280 mm (11 in), D 13 mm (0.51 in) with surface mount kit: W 165 mm (6.5 in), H 280 mm (11 in), D 51 mm (2 in) (measurements without camera dome) Weight incl. package: approx. 750 g (1.65 lbs) Colour: front panel: light-grey (like RAL 7035) front panel frame: graphite-grey (like RAL 7024) benefits Built-in Axis camera and illuminator Multiple H.264 and Motion JPEG streams Compatible to 3rd-Party-Video components e.g. NVRs Excellent video quality including HDTV 720p and H.264 Wide angle of view Video functions e.g. motion detection, recording etc. Polycarbonate construction Back-lit direct dialling buttons and label areas Protection classification IP 65 Supports DSP-Features such as OpenDuplex, Audio Moni toring, Microphone- / Loudspeaker Surveillance, etc. Line length in LAN The maximum line length of Cat. 5 cabling in a LAN is 100 m (328 ft) e.g. from switch to Intercom station. Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 2 7

3 Technical Data AXIS Camera Technical data Camera Image sensor: 1/4 progressive scan RGB CMOS Total horizontal camera angle of view: 165 Lens: 1.97 mm, F3.0, 105 Camera angle adjustment (mechanical): +/- 30 Light sensitivity: lux, F3.0 Shutter time: 1/ s to 1/6 s Video Video compression: H.264 (MPEG-4 Part 10/AVC) Motion JPEG Resolutions: 800x600 to 160x x800* to 160x90 *1440x900 (1.3 MP) scaled resolution available via VAPIX Frame rate: 30 fps in all resolutions Video streaming: Multiple, individually configurable streams in H.264 and Motion JPG, Controllable f r a m e r a t e a n d b a n d w i d t h V B R / C B R H Image settings: Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, wide dynamic range - dynamic contrast, fine tuning of behavior at low light, mirroring of images Rotation: 0, 90, 180, 270, including Corridor Format Text and image overlay, privacy mask Technical data Network Security: Password protection, IP address filtering, HTTPS** encryption, IEEE 802.1X network access control**, digest authentication, user access log Supported protocols: IPv4/v6, HTTP, HTTPS**, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS System integration Application Open API for software integration, including Programming VAPIX and AXIS Camera Application Platform Interface: from Axis Communications; specifications available at ONVIF, specifications at AXIS Video Hosting System (AVHS) with One-Click Camera connection Intelligent video: Video motion detection, active tampering alarm, AXIS Camera Application Platform Event triggers: Intelligent video Event actions: File upload: FTP, HTTP, network share and ; notification: , HTTP and TCP; external output activation; video recording to edge storage; pre- and post-alarm video buffering Data Streaming: Event data Built-in installation aids: Pixel counter Memory: 128 MB RAM, 128 MB Flash Edge storage: Support for recording to network share (Network Attached Storage or file server) **This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. ( Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 3 7

4 System/Network Requirements SysteM REQUIREMENTS FULL SCOPE OF OPERATION ONLY WITH GE 800 / GE 300 GE 800 (min. PRO ) with G8-IP (min. G3-8-IP 4.0b01) GE 300 (min. PRO ) with G3-IP (min. G3-8-IP 4.0b01) Configuration software min. CCT Configuration software IPStationConfig (included in setup of CCT ) BACKWARDS COMPATIBILITY TO GE 700 / GE 200 GE 700 (min. PRO 5.7) with G7-DSP-IP GE 200 (min. PRO 5.7) with G2-DSP-IP Detected as ET 908 therefore they can only be used with the feature scope of an ET 908. Firmware download only possible with GE700-UPG or via IPStationConfig! requirements to the network IP-Addresses and Ports For the the DHCP functionality is available. If DHCP is not used, the must have a fixed IP-address. In case of a changing public IP-address, dynamic registration of a is possible. Communication from the program IPStationConfig is done via Port (can not be configured). Communication from the to the Intercom Server (UDP protocol) is done via port (configurable). QoS Requirements Maximum One-Way-Delay 100 ms Delay-Jitter not above 50 ms 0% packet loss for perfect audio quality Bandwidth Required Bandwidth incl. protocol overhead per, for upload/download each: speech and data 96 kbit/s Speech is compressed according to G.722 standard Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 4 7

5 Installation precautions When opening the stations ESD precautions must be observed. The stations may only be opened by authorised service engineers. Mounting Instructions Do not expose the station to extreme temperature (see Technical Data on page 2). For flush mounting a flush mount kit WSFB 50V (available separately) is required. For surface mounting a surface mount kit WSSH 50V (available separately) is required. Recommended Mounting height The upper edge of the station approx m (5.4 feet) from the finished floor, based on an average man being 176 cm (69.2 ) tall and a facial viewing distance of 25 cm (9.8 ) to 50 cm (19.6 ). Please adapt the mounting height to the individual needs. approx m (5.4 ft) Finished floor connection Camera illuminator control 1 By default, the camera illuminator is connected to the main board of the subscriber via the expansion bus. In CCT the device is shown with an additional device EB2E2A. Use OUT1 on the EB2E2A to switch the camera illuminator on and off. It is also possible to use OUT1 as attendant contact. For example to switch the camera illuminator on at initiation of a call. 2 OUT2 connection 1 Expansion bus LED brightness + _ 2 The camera illuminator can also be connected by using OUT2 of the subscriber. In this case it is possible to control the camera illuminator via this contact and the expansion bus can be used for other devices. NOTE: It is only possible to use one OUT2 connection, i.e. either the screw terminals or the connector (see connection diagram). Dimming the camera illuminator For dimming the camera illuminator use the potentiometer on the camera board. Attention: OUT 1 OUT 1 Slot for inserting button label IN 1 MUTE PoE has to be connected to the RJ 45 jack IP Uplink (see connection diagram). The AXIS camera is connected to the IP Downlink jack of the station PCB IN 2 GND IN 3 LINE GND LINE+ EP EP+ EM EM+ IP Uplink + PoE IP Downlink (AXIS Camera + PoE) Handset: Microphone Loudspeaker Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 5 7

6 Installation measurements front panel Measurements in mm (inch), not to scale! Depth: 13 (0.51) cavity wall mounting: 15 (0.59) ( shadow gap between front panel & wall) 165 (6.5) 280 (11) Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 6 7

7 COMMEND A Strong Network Worldwide Europe America SWITZERLAND LIECHTENSTEIN Commend AG Tel USA CANADA LATIN AMERICA Commend Inc. Tel FRANCE Commend France S.A.S. Tel SPAIN PORTUGAL ITALY Commend Ibérica S.L. Tel Commend Italia S.R.L. Tel Asia-Pacific AUSTRALIA NEW ZEALAND Commend Australia Tel (Melbourne) Tel (Sydney).au NETHERLANDS BELGIUM LUXEMBURG AUSTRIA SLOVENIA RUSSIA HUNGARY CROATIA SERBIA BOSNIA-HERZEGOVINA MONTENEGRO MACEDONIA KOSOVO ALBANIA Commend Benelux B.V. Tel Commend Österreich GmbH Tel Commend Adria d.o.o. Tel CHINA SINGAPORE ISRAEL Commend Business Hub China Tel Commend Business Hub Asia Isolectra Far East Pte. Ltd Tel sg Sberlophone Ltd Tel SLOVAKIA CZECH REPUBLIC Commend Slovakia spol. s r.o. Tel Africa UNITED KINGDOM IRELAND SWEDEN NORWAY FINLAND DENMARK ICELAND Commend UK Ltd Tel Commend Business Hub Nordic JNT Sound System AB Tel SOUTH AFRICA ALGERIA TUNISIA MOROCCO Commend Business Hub South Africa Evolving Management Solutions (Pty) Ltd Tel Commend France S.A.S. Tel POLAND C&C Partners Telecom Sp.z o.o. Tel Other countries GERMANY Schneider Intercom GmbH Tel Commend International GmbH Tel Datasheet Version 2.0/0513 Errors and omissions excepted Products may change in the interest of technical improvements without notice. P 7 7

IP DSP-Intercom Stations Series EE 900A

IP DSP-Intercom Stations Series EE 900A Datasheet 1 2 IP DSP-Intercom Stations The dynamic, timeless design of the station series EE 900A fits perfectly into any modern office environment. The graphic display with backlight shows a multitude