AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

Size: px
Start display at page:

Download "AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]"

Transcription

1 MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No (Continuous Strip) Used with HDF-20 Plugs page 126 HDF-20 or ll-plastic Plug.037 [0.94] Dia. Max..108 [2.74].112 [2.84].212 [5.38] Max. Notes: 1. Use punching tool to remove undesired pin commoning locations on commoning strip. Use mating receptacle to seat strip over pins in plug. Punching tool is not supplied by TE. 2. Sold in strip form, strip contains 10,000 commoning locations. Male Screw Retainers for Connectors (HDE and HDP) Male Screw Male Screw Male Screw Steel, zinc plated clear or yellow chromate Retaining Clip.012 [0.31] stainless steel HDE pages 114 & 115 Instruction Sheet Retaining Clip See Note [6.35].280 [7.11] Retaining Clip ( Series) See Note [5.66].185 [4.70] 146 Note: ll part numbers are RoHS compliant. Male Screw Dimension Male Screw Retainer Kit No. Thread Size Finish Individual Bulk Packed* ** Yellow.200 Chromate M3.225 (Metric) Clear Chromate *Each part is individually bulk packed for multiple kit orders. ** Phillips Head Screw Notes: 1. ll parts are packaged unassembled. 2. Each kit is comprised of two male screws and two retaining clips. Male screw retainers are also furnished as part of cable clamp kits (pages 137 and 138). Notes: 3. Male screw retainers mate with female screwlocks (page 144), with HDF metal-shell connectors featuring threaded inserts (page 148) and with HD metal-shell board mount connectors featuring threaded inserts or female screwlocks. Notes: 4. Retaining clip must be assembled onto connector flanges with threaded hole toward wire side of connector. Notes: 5. ll screws have straight slotted heads except where noted. Notes: 6. Retaining clip must be assembled onto connector flanges with notched side of retainer toward mating side of connector. to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

2 MPLIMITE Subminiature D Connectors Male Screw Steel, zinc plated yellow chromate Retaining Clip.012 [0.51] stainless steel Male Screw Retainers for ll-plastic Connectors (HDE) HDE ll-plastic pages 112 & 113 Instruction Sheet Male Screw.220 [5.59] ll-plastic Retaining Clip.250 [6.35].280 [7.11] Kit Numbers: (Individually packaged, see Note 2) (Bulk packed)* *Each part is individually bulk packed for multiple kit orders. Notes: 1. ll parts are packaged unassembled. 2. Each kit is comprised of two male screws and two retaining clips. 3. Male screw retainers mate with female screwlocks (page 148), with HDF ll-plastic connectors featuring threaded inserts (page 125), with HD ll-plastic board mount connectors featuring integral standoffs with threaded inserts and female screwlocks. Notes: 4. Retaining clips must be assembled onto connector flanges with threaded hole toward wire side of connector. Male Screw Steel, zinc plated clear chromate Retaining Clip.012 [0.51] stainless steel HDF and ll-plastic Instruction Sheet Male Screw Retainers for and ll-plastic Connectors (HDF) or ll-plastic Male Screw Retaining Clip Threaded Hole.300 [7.62] Kit Numbers: (Individually packaged, see Note 2) (Bulk packed)* *Each part is individually bulk packed for multiple kit orders. Notes: 1. ll parts are packaged unassembled. 2. Each kit is comprised of two male screws and two retaining clips. 3. Male screw retainers mate with female screwlocks (page 148), and with HD board mount connectors featuring female screwlocks. Notes: 4. Retaining clips must be assembled onto connector flanges with threaded hole toward wire side of connector. Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0) [7.11].280 [7.11] 147

3 MPLIMITE Subminiature D Connectors ll Parts Cold rolled steel, zinc plated clear or yellow chromate HDE or ll-plastic pages HDF or ll-plastic HD Board Mount pages 54-71, 78-85, Female Screwlocks for and ll-plastic Connectors (HDE, HDF, HDP) Square Nut.250 [6.35] Flat Washers C.188 [4.78] Style (). Female Screwlocks Kit C Style (B). Standard and Long Female Screwlocks Kit.188 [4.78] Instruction Sheet Nut Driver, Part No (Used for assembling female screwlocks to connector flange) or ll-plastic (Shown for Ref. only. See Notes 4 & 5.) Flat Washers (See Note 3.) Part Number Dimension.158 [4.01] Connector Dimension Thread Kit Number Used with Style C Size Finish Individual Bulk Packed HD ll-plastic Right-ngle.250 Yellow Chromate Plugs and s () 6.35 Clear Chromate HDE or ll-plastic.250 Yellow Chromate Plugs and s (B) 6.35 Clear Chromate Yellow Chromate HDP or HDF or.312 Clear Chromate ll-plastic Plugs and (B) s 7.93 M3 Yellow Chromate (Metric) Clear Chromate HD or HDF ll-plastic Plugs Yellow Chromate and s with.560 (B) Clear Chromate Integral Standoffs *2-56* Clear Chromate * 2-56 is the male thread size. The female thread size is. Each part is individually bulk packed for multiple kit orders. Notes: 1. ll parts are packaged unassembled. 2. Each female screwlock kit is comprised of two assemblies as illustrated above. 3. One or two flat washers may be required for panel thicknesses less than.060 [1.52]. Female screwlocks are not recommended for panel thicknesses greater than.060 [1.52]. Notes: 4. Female screwlocks with 2-56 thread size are to be used with cable clamps with mounting flanges. Female screwlocks with and M3 (Metric) thread sizes can be used with all other cable clamps. Notes: 5. Female screwlocks mate with male screw retainers (pages 146 and 147). 6. Short female screwlocks cannot be used with HDF connectors () Individual Screwlocks (Washers and Nuts not included) Connector Dimension Thread Screwlocks Used with Style C Size Finish Individual Bulk Packed HD ll-plastic Right-ngle.250 Yellow Chromate Plugs and s () 6.35 Clear Chromate Clear Chromate Yellow Chromate HDP or HDF or (B) **M2.6** ll-plastic Plugs and (Metric) Clear Chromate s ***M3*** (Metric) Clear Chromate (Special) 4.70 Clear Chromate Each part is individually bulk packed for multiple kit orders. With captivated star washer. No additional hardware included. Part No Dimension.158 [4.01] ***M2.6 is the female thread size. The male thread size is. ***M3 is the female thread size. The male thread size is. 148 Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

4 MPLIMITE Subminiature D Connectors Slide Latches Screws, Washers and Hex Nuts Steel, zinc plated yellow chromate 2-56 Screws, Washers and Hex Nuts Steel, zinc plated clear chromate Slide Latch Stainless steel or ll-plastic.135 [3.43] Style I Slide Latch (See Note 3.) Screw C.165 [4.19] B Max. HDE or ll-plastic pages HDF or ll-plastic HD Board Mount pages 54-71, 78-85, Instruction Sheet Flat Washer For Shell Sizes 1 and 4 Style II or ll-plastic.135 [3.43] Slide Latch (See Note 4.) 2-56 Screw C.165 [4.19] B Max. For Shell Sizes 2, 3 and 5 Style III.135 [3.43] Slide Latch (See Note 5.) Screw C.165 [4.19] B Max. Flat Washer For Shell Sizes 2, 3 and 5 to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

5 MPLIMITE Subminiature D Connectors Slide Latches Slide Latch Style III (for Shell Sizes 2, 3 or 5) Locking Post Slide Latch Style II (for Shell Sizes 2, 3 or 5) 2-56 Locking Post Typical pplications of Locking Posts and Slide Latches Typical pplications of Locking Posts and Slide Latches Shell Dimensions Slide Latch Kit Numbers Side Latch Size Style B C Individual Bulk Packed* Only 1 I II III II III I III *Each part is individually bulk packed for multiple kit orders. Notes: 1. ll parts are packaged unassembled. 2. Each kit is comprised of a slide latch and two screws, flat washers (if required), lock washers and hex nuts. Style I slide latches are also furnished as part of cable clamp kits (page 142). Notes: 3. Style I slide latches can be used with cable clamps that do not extend beyond the front flange of the connector or on connectors without cable clamps. Notes: 4. Style II slide latches can be used with any cable clamp that has the mounting ear configuration as shown above. 5. Style III slide latches can be used on connectors without cable clamps or with cable clamps that do not have the mounting ear configuration shown with Style II above. Notes: 6. Slide latches mate with locking posts (page 151). Notes: 7. No nuts, washers, or lockwashers. 150 Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

6 MPLIMITE Subminiature D Connectors Slide Latch Clip ssembly for Unfiltered Mating Half Screw, Washers and Cold rolled steel, zinc plated clear chromate Clip Stainless steel (See Note 2.) Clip Style 1 Screw Style 2 L.165 [4.19] Instruction Sheet Kit Part Numbers: Rolled Edge Flat Washer Screw Thread Length Screw Part Pkg. Size Style No. L.415 Unit Bulk Unit ** Notes: 1. ll parts are packaged unassembled. 2. Slide Latch Clip ssemblies can be used on any Subminiature D MPLIMITE HD-20 metal-shell plug or receptacle. 3. Slide Latch Clip ssemblies mate with Locking Post ssemblies shown below. Two assemblies per package. * Each part is individually bulk packed for multiple kit orders. ** Designed for cable clamps with mounting ears. No flat washers included. Locking Post ssembly ll Parts Cold rolled steel, zinc plated clear or yellow chromate HDE or ll-plastic pages HDF or ll-plastic HD Board Mount pages 54-71, 78-85, Instruction Sheets (See Note 2.) Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0) Post Flat Washers (See Note 4.) Thread Locking Dimensions Locking Post Kit Number Size Post (See Note 4) Finish B Individual Bulk Packed* Yellow Chromate Clear Chromate Yellow Chromate Yellow Chromate *Each part is individually bulk packed for multiple kit orders. Part No Part No Notes: 1. ll parts are packaged unassembled. 2. Each kit is comprised of two complete assemblies, as illustrated above. 3. For front panel mounting, it is recommended that a shim be used between the connector flange and panel to prevent bowing of the flange. 4. Locking posts with 2-56 thread size are to be used with cable clamps with mounting flanges. Locking posts with thread size can be used with all other cable clamps 5. Locking posts mate with slide latches (page 149). B B 151

7 MPLIMITE Subminiature D Connectors Material.015 [0.38] Stainless steel HDE pages 114 & 115 HDP (Tin plated only) pages Spring Latches for Cable Clamps with Mounting Ears (Two-Piece) Spring Latch Straight Exit RFI/EMI Shield (Shown for Ref. only. See Note 1.) Instruction Sheet [5.84] Latching Block Spring Latch Part Numbers: (Order separately, (two per package) see pages 153 & 154.) (bulk packed)* *Two-piece spring latches are individually bulk packed for multiple part orders..320 [8.13].900 [22.86] Spring Latch Notes: 1. Two-piece spring latches can be used with RFI/EMI shields (pages 141). Notes: 2. Two-piece spring latches mate with latching blocks (pages 153 & 154). Typical pplication of Two-Piece Spring Latches with Straight Exit RFI/EMI Shield Spring Latches (Two-Piece) Material: Stainless steel HDE pages 114 & 115 Instruction Sheet [7.62].920 [23.37] Spring Latch Part Numbers Size Dimension Two Per Bulk Package Packed* *Two-piece spring latches are individually bulk packed for multiple part orders. Notes: 1. These dimensions must be maintained to assure satisfactory operation of the spring latches. Notes: 2. Two-piece spring latches mate with latching blocks (pages 153 & 154). Typical pplication of Two-Piece Spring Latches with Post Molded Strain Relief.170 [4.32] Min. (pplies at a height of.320 [8.13] Min. above connector flange. lso, see Note 1.) Envelope of Post Molded Strain Relief (ccounts for Design Variations) 152 Note: ll part numbers are RoHS compliant..220 ±.015 [5.59 ±.381 ] (See Note 1.) to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

8 MPLIMITE Subminiature D Connectors Latching Blocks Zinc Pan Head Screws Steel, zinc plated HDE or ll-plastic pages HDF or ll-plastic HD Board Mount pages 54-71, 78-85, Mating/Panel Mounting page 136 Instruction Sheet Latching Blocks with Threaded Hole or ll-plastic B (See Note 3.) Latching Block Pan Head Screw (Supplied with and -5 only) Shell (No. of Dimensions Rear-Panel Latching Block Front-Panel Latching Block Panel Thread Part No. Part No. Contact B Thickness Size Pos.) Individual Bulk Packed* Individual Bulk Packed* M (Metric) thru (9 thru 37) M (Metric) (50) **Bulk packed for multiple part orders. **Individual kits contain two latching blocks per package. Notes: 1. ll parts are packaged unassembled. 2. Each front panel latching block kit is comprised of two latching blocks. Two pan head screws of the appropriate length and thread size to be supplied by customer. Notes: 3. B dimension.250 [6.35] is for connector flange mounting,.220 [5.59] is for use with.030 [0.76] thick panels, and.190 [4.83] is for use with.060 [1.52] thick panels. Notes: 4. Latching blocks mate with spring latches (page 152)..030 [.762] or.060 [1.52] Thick Panel Typical pplication of Front-Panel Mounted Subminiature D Connector using Front-Panel Latching Blocks Typical pplication of Rear-Panel Mounted Subminiature D Connector using Rear-Panel Latching Blocks Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

9 MPLIMITE Subminiature D Connectors Material Latching Blocks Zinc HDE or ll-plastic pages HDF or ll-plastic HD Board Mount pages 54-71, 78-85, Mating/Panel Mounting page 136 Instruction Sheet Latching Blocks with Slot Recess and Thru Hole Mounting Screw (Customer Supplied).120 [3.05] Dia. Thru Hole or ll-plastic (Shown for Ref. only, See Note 2.) B Mounting Nut (Customer Supplied).196 [4.98] Dia. (Max.) x.110 [2.79] Deep Slot Shell (No. of Dimensions Panel Rear-Panel Latching Block Part No. Front-Panel Latching Block Part No. Contact Pos.) B Thickness Individual Bulk Packed* Individual thru (9 thru 37) (50) **Bulk packed for multiple part orders. **Individual kits contain two latching blocks per package. Notes: 1. Mounting screws and nuts are to be supplied by Customer. 2. These latching blocks allow mounting screws to be installed thru the front of the block and to be screwed into the bracket of a right-angle connector, a fixed insert in a connector mounting flange, or a nut behind the connector mounting flange (as illustrated above). Notes: 3. Latching blocks mate with spring latches (page 152)..060 [1.52] or.090 [2.29] Thick Panel Typical pplication of Front-Panel Mounted Subminiature D Connector using Front-Panel Latching Blocks Typical pplication of Rear-Panel Mounted Subminiature D Connector using Rear-Panel Latching Blocks 154 Note: ll part numbers are RoHS compliant. to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

10 MPLIMITE Subminiature D Connectors Standoff Bushings Screws (Customer Supplied) Material: luminum HD Straight Posted pages 76-85, Standoff Bushing.250 [6.35] Threads (thru) Screws (Customer Supplied) Pc Board.435 [11.05] Kit Numbers: (two bushings per package) (bulk packed)* *Parts are individually bulk packed for multiple part orders. Keying Plug (for Size 20 Socket Contacts) Material: Polyphenylene oxide ll HDE, HDP and HD s with Socket Contacts Keying Plug MP-LTCH (electrical connectors) can be used on HD22 Socket Contacts Keying Plug (See Note) or ll-plastic.115 [2.92] Max. Dia..200 ±.010 [5.08 ± 0.25 ] ] Part Number: Notes: 1. Keying plug is installed taper-end first into front of receptacle. Notes: 2. Sold individually. ] EMI/RFI Gaskets.400 [10.16].400 [10.16] Brass,.006 [0.15] thick; bright tin plated.800 ±.010 [20.32 ± 0.25 ] B.120 Dia. [3.05] (2 Holes) C ±.010 C [± 0.25 ].010 [0.25] Ref. 9, 15, 25 and 37 Positions Note: ll part numbers are RoHS compliant. Shell Size Dimensions (No. of Gasket Contact Pos.) B C Part No (9) (15) (25) (37) to change. US: +1 (800) Germany: +49 (0) China: +86 (0)

8Rectangular Pin and Socket Connectors

8Rectangular Pin and Socket Connectors AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available

More information

TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:

TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number: TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE

More information

Filtered Combo D-Subminiature Connectors

Filtered Combo D-Subminiature Connectors Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,

More information

TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:

TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID: TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE

More information

3M I/O Connector Mounting Options and Hardware

3M I/O Connector Mounting Options and Hardware M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.

More information

M Series Pin and Socket Connectors. RoHS. Ready

M Series Pin and Socket Connectors. RoHS. Ready M Series RoHS Ready M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard connectors (unloaded),

More information

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3011

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3011 CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3011 DRAWING TITLE: 5V & 12V Power Distribution Cable DRAWING

More information

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include: Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications

More information

Cable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1

Cable Connector Housings for D-Subminiature connectors, Series TMC.  Catalog E /04 Edition 1 Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,

More information

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER: MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial

More information

FCC17 Series FILTERED STACKED D-SUB CONNECTORS

FCC17 Series FILTERED STACKED D-SUB CONNECTORS FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP

More information

Cord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections.

Cord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections. -Pin Amp Plastic 0883 Kit (consists of) 080 Receptacle 03 Pins (Qty ) 088 Kit (consists of) 080 Connector 03 Sockets (Qty ) Note: Strain relief clamp 03 needs to be ordered separately with cord-mounted

More information

Terminals, Lugs, and Fasteners

Terminals, Lugs, and Fasteners Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying

More information

Introduction. Quadrax Contacts, Connectors and Cables. Product Facts

Introduction. Quadrax Contacts, Connectors and Cables. Product Facts Introduction Product Facts n 2 mm centerlines n Designed per ARINC 600 Supplement 18 n Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular (GPR), MIL-DTL-38999

More information

Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue

Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter

More information

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT

More information

CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.

CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly. Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit

More information

Next Generation ARINC 600 Connector

Next Generation ARINC 600 Connector Next Generation ARINC 600 Connector Application Specification 114-13272 29 NOV 12 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters

More information

IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)

More information

Table of Contents Interface Module Systems

Table of Contents Interface Module Systems UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules 197-204 DIN 41612 onnector 198 Telco onnector

More information

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &

More information

Series 2M801 Connector

Series 2M801 Connector 1 Series 2M801 Connector PDS-223 Ordering Guide for 2M801 Plug and Receptacle 1. 2. 3. 4. 5. 6. Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M801-00X -16 M 7-10 P A KEYING

More information

HD22 and HD30 Service Parts

HD22 and HD30 Service Parts HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the

More information

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3014

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3014 CABLE DRAWING: DRAWING TITLE: ATIM-T Power Cable POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3014 DRAWING NO.: MWACAB-0014

More information

D-Sub SEaled subminiature D connectors, 2.54 mm pitch

D-Sub SEaled subminiature D connectors, 2.54 mm pitch SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with

More information

7403 K321. Display Wall Mount. Kit Instructions. Issue A

7403 K321. Display Wall Mount. Kit Instructions. Issue A 7403 K321 Display Wall Mount Kit Instructions Issue A ii Revision Record Issue Date Remarks A Nov 2008 First issue 1 Introduction This kit is used in to secure a 7403 Display Head on a vertical surface.

More information

TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO

TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4

More information

zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe

zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

FASTON Printed Circuit Board Tabs and Receptacles

FASTON Printed Circuit Board Tabs and Receptacles FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion

More information

Metal Backshell. Materials and Finishes Material: Brass Finish: 50 in. Gold over Copper

Metal Backshell. Materials and Finishes Material: Brass Finish: 50 in. Gold over Copper Subminiature Space/High Reliability Metal ackshell Metal ackshells provide strain relief. Various profiles available for different cable routing requirements. Product eatures Qualified to MIL-Spec M85049

More information

CHAMP Interconnection System

CHAMP Interconnection System CHAMP Interconnection System Flowchart of CHAMP Connectors: How This Catalog is Organized SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 0.8mm 1.27mm 2.16mm Centerlines [.0315"] [.050"] [.085"]

More information

ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201

ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201 HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36

More information

Oct 16 Rev D

Oct 16 Rev D Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters

More information

2 PIECE BOARD-TO-BOARD

2 PIECE BOARD-TO-BOARD 2 PIECE BOARD-TO-BOARD 201-01-123 1. SPECIFICATION DISTRIBUTION No restrictions for issue 2. SCOPE This specification contains the application notes for the 9159 two part connectors. 3. PRODUCTS 10-9159

More information

Small Circular Connector. JN1/JN2 Series. Cap

Small Circular Connector. JN1/JN2 Series. Cap COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug

More information

IP68 Sealed - Mini USB Buccaneer

IP68 Sealed - Mini USB Buccaneer IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB

More information

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858) KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,

More information

2M801 Dual-Start ACME Threads

2M801 Dual-Start ACME Threads 2M801 Dual-Start ACME Threads Ordering Guide for 2M801 Series Style Service Class - Contact Type Alternate Insert Arrg. Position 2M801-0XX -16 NF 6-7 P A SERIES 2M801-007 Plugs with Integral Backshell

More information

Series 804 Push-Pull Mighty Mouse Receptacle Connector

Series 804 Push-Pull Mighty Mouse Receptacle Connector Series 0 Series 0 Push-Pull Mighty Mouse 0-00 and 0-00 Ordering Information In-Line Rear Panel Mount Jam Nut Front Panel Mount Jam Nut for direct attachment of a cable shield. Install a boot, or overmold

More information

3M I/O Connector Mounting Options and Hardware

3M I/O Connector Mounting Options and Hardware M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: January 14, 2008 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon

More information

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series. Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32

More information

060-Hardware. Clamps and Brackets Hose Clamps

060-Hardware. Clamps and Brackets Hose Clamps Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

More information

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing

More information

AMP- LATCH* Universal

AMP- LATCH* Universal AMP- LATCH* Universal Application Specification Input/Output 114-7011 Pin Connectors 21 MAR 11 Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL

DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL Version 2.1 June 4, 2013 0 Table of Contents Low Profile Pan Tilt Kit Description... 3 Low Profile Pan Tilt Unit Basic Operation... 4 Mounting

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

G12/G12x USER S MANUAL

G12/G12x USER S MANUAL G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5

More information

Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays

Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40 - 55 flat Panel Displays Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"

More information

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo

More information

(MR) Miniature Rectangular Connectors (Continued)

(MR) Miniature Rectangular Connectors (Continued) Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug

More information

INTERCONNECT SOLUTIONS

INTERCONNECT SOLUTIONS INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply

More information

WIRE AND CABLE MANAGEMENT

WIRE AND CABLE MANAGEMENT Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network

More information

A3000, LP3000 & CB3000

A3000, LP3000 & CB3000 A3000, LP3000 & CB3000 Dimensions Inches (Millimeters) A3000 & LP3000 A31930307 LP307102 Specifications Rating: A3: 30A, 600V* LP3: 30A, 150V* CB3: 30A, 600V* Wire Range: #12-22 AWG Cu Center Spacing:

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings - Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT

More information

AUG 15 Rev F

AUG 15 Rev F ORIGINAL INSTRUCTIONS Small Form-Factor Pluggable (SFP) Cage Assembly Seating Tool Kits Instruction Sheet 408-8848 12 AUG 15 Rev F Compliant Pin Contact Back 2 x 1 Seating Tool 1490197-2 (Shown) Bottomed

More information

PNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:

PNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose: PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.

More information

A0 & CB0. Single Row Terminal Blocks. Dimensions- Inches (Millimeters) Specifications CB0

A0 & CB0. Single Row Terminal Blocks. Dimensions- Inches (Millimeters) Specifications CB0 A0 & CB0 Dimensions- Inches (Millimeters) A0 0.12 (3.0) Ø A00110407 0.250 (6.35) Specifications Rating: 10 A, 300 V Center Spacing: 0.25 (6.35 mm) Wire Range: #16-30 AWG Screw Size: M3.0 nickel-plated

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How

More information

Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5

Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5 Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70

More information

CONNECTORS & RECEPTACLES

CONNECTORS & RECEPTACLES TINI Q-G MINIATURE CONNECTORS DESIGN FEATURES STYLE Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available

More information

Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings

More information

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1 Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive

More information

Termination End. Figure 1

Termination End. Figure 1 AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

Section 1 Specialty Profiles

Section 1 Specialty Profiles Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel

More information

SITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions

SITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions Introduction 1 Installing/Mounting 2 SITRANS F Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel Hardware Installation Instructions 1/2010 A5E02518333A Revision 04 Legal information Warning notice

More information

ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT

ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK

More information

M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET

M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:

More information

Parts List with Exploded Views

Parts List with Exploded Views Parts List with Exploded Views Wall Ovens 0 Oven Contol Panel Parts List 00 Control Head, 0, Sngl, Sst 00 Control Head, 0, Dbl, Sst 006 Control Head, 0, Sngl, Plt 00 Control Head, 0, Dbl, Plt 00 Control

More information

Parts / Spares Reference Sheet

Parts / Spares Reference Sheet Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b

More information

Parts and Service Manual IMCO

Parts and Service Manual IMCO XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF

More information

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment) 25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The

More information

Electrical Components Catalog Universal MATE-N-LOK Connector System

Electrical Components Catalog Universal MATE-N-LOK Connector System Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation

More information

TDM To MiniMech conversion ProceDure

TDM To MiniMech conversion ProceDure TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

Service Parts Diagrams. For Model: 2000i-DVX with the the NEC VT595 MT1060 Projector

Service Parts Diagrams. For Model: 2000i-DVX with the the NEC VT595 MT1060 Projector Service Parts Diagrams For Model: 000i-DVX with the the NEC VT595 MT060 Projector 000i-DVX Serial numbers with 000i-DVX-R-5000 the NEC VT560 Projector and higher 000i-DVX Serial numbers with 000i-DVX-R-0000

More information

Parts List with Exploded Views

Parts List with Exploded Views Parts List with Exploded Views Wall Oven- Series 0 Oven Contol Panel Parts List 00 Control Head, 0, Sngl, Sst 00 Control Head, 0, Dbl, Sst 006 Control Head, 0, Sngl, Plt 00 Control Head, 0, Dbl, Plt 00

More information

Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer

Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Difficulty Level: Medium Estimated time to execute: 1 Hour Revision History Issue Date Reason 001 5/31/2016 Initial

More information

Installation Guide. Retrofit Kit for USB Ready Intraoral Systems

Installation Guide. Retrofit Kit for USB Ready Intraoral Systems Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the

More information

AMPMODU Interconnection System

AMPMODU Interconnection System AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16

More information

2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805

2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805 M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and

More information

Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A

Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A Application Specification IMPACT* Standard 114-13258 Connector Systems 05 NOV 10 Rev A NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.

More information

FLAT FLEXIBLE CABLE (FFC) CONNECTORS

FLAT FLEXIBLE CABLE (FFC) CONNECTORS FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The

More information

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1 Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive

More information

AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:

AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number: Minarik Variable Speed AC Motor Drives AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY INSTALLATION INSTRUCTIONS Document Number: 250-0297 These instructions apply to models rated: 7.5 25

More information

Service Parts Diagrams. For Model: 2000i-DVS with the NEC VT465 Projector 2000i-DVS with the NEC VT470 Projector

Service Parts Diagrams. For Model: 2000i-DVS with the NEC VT465 Projector 2000i-DVS with the NEC VT470 Projector Service Parts Diagrams For Model: 000i-DVS with the NEC VT65 Projector 000i-DVS with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board 000i-DVS Interactive Whiteboard Identifying

More information

Heat Containment System (HCS)

Heat Containment System (HCS) Heat Containment System (HCS) Revision Number 1 Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 www.wrightline.com info@wrightline.com All products

More information

Rear Consumer LCD Hinge Assembly Large Displays

Rear Consumer LCD Hinge Assembly Large Displays 7403-K454 Rear Consumer LCD Hinge Assembly Large Displays Kit Instructions Issue D Revision Record Issue Date Remarks A Nov 2008 First issue B June 2009 Removed Power Cable from the kit contents C May

More information

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_> 96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5

More information

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist. CONSOLE CONNECTOR KIT 8101 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models A-100, D-100, RT2, RT3 LESLIE Speaker Models 122, 122RV KIT CONTENT Console Connector Assembly 047357 Echo Control

More information

604 SOCKET HEAD BUTTON SCREWS

604 SOCKET HEAD BUTTON SCREWS 600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637

More information

MTA-156 IDC Quad Connectors

MTA-156 IDC Quad Connectors MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru

More information

Service Parts Diagrams

Service Parts Diagrams Service Parts Diagrams For Model: 000i-DVX with the NEC MT00 Projector 000i-DVX with the NEC VT0 Projector 000i-DVX with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board

More information

High Current Products Catalog Revised 4-01

High Current Products Catalog Revised 4-01 Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from 196 C to

More information

High Current Products Catalog Revised onlinecomponents.com

High Current Products Catalog Revised onlinecomponents.com Interfaces Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from

More information

Assembly Instructions Triton Enclosure for Poseidon With Data Acquisition November, 2007 V0.9 DSC Document #

Assembly Instructions Triton Enclosure for Poseidon With Data Acquisition November, 2007 V0.9 DSC Document # Assembly Instructions Triton Enclosure for Poseidon With Data Acquisition November, 2007 V0.9 DSC Document #7521002 Diamond Systems Corp. (650) 810-2500 www.diamondsystems.com This document describes how

More information

J DSUBMINIATURE CONNECTOR SERIES

J DSUBMINIATURE CONNECTOR SERIES J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs

More information

MacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation

MacBook Pro 13 Unibody Mid 2010 SSD Dual Drive Installation MacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation Use this guide to install a second SSD in place of the optical drive. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 13 INTRODUCTION

More information