Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.

Transcription

1 Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet

2 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact density Very robust hoods/housings Corrosion resistant Excellent EMC properties (with continuous shielding) Quick and easy assembly Vibration resistant screw locking system Up to 19 contacts, 25 V~ / 60 V- Ideal for applications such as measurement and automatic control Note Connectors should not be coupled and decoupled under electrical load Nickel plated surface O-ring-sealing to protect screw locking against vibrations and pollution Standard Pg or EMC cable seals M 23 screw locking system O-ring-sealing for panel mounted housings General Information It is the user's responsibility to check whether the components illustrated in this catalogue comply with different regulations from those stated in special fields of application which we are unable to foresee We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code) We are bound by the German version only Screw-, solder- or PCB solder termination up to 19 contacts Plastic spring washer for fixing of inserts in the bulkhead mounted housing Page 2 / 12

3 Circular Connectors Technical Details Specifications DIN VDE 0627 DIN VDE 00 Derating Diagram Hoods/housings Material Surface Flat sealing O-ring-sealing Temperature range IP acc to DIN in locked position Inserts Copper-zinc alloy Nickel plated NBR FPM (Viton) - 40 C + 5 C IP 67 Insert: 12 positions Wire gauge: 1 mm² (AWG 18) Number of contacts Working current - power contact - signal contact (see Derating Diagram) Working voltage 1) Degree of pollution Test voltage U rms Insulation resistance Material Temperature range Flammabilitiy acc to UL A 9 1x15A 8x 7A 12 7 A 17 7 A 25V~ / 60V kv 12 > 10 W Thermoplastic polyester (PBT) - 40 C + 5 C V x 7A 3x10A Working current Ambient temperature Contacts Material Surface Contact resistance Screw termination - power contact - signal contact Solder termination - power contact - signal contact Crimp termination - D-Sub contact PCB solder termination - power contact - signal contact - solder length with reference to bulkhead mounted housing Copper alloy Gold plated < 5 mw mm², AWG mm², AWG mm², AWG mm², AWG see Subminiature D catalogue Ø 15 mm Ø 06 mm 35 mm Shielding [db] Shielding of the EMC housing Frequency [MHz] 1) Acc to DIN VDE 0627 metallic parts which may be touched by a person and may have voltages present under fault conditions, must have integral protection Therefore this R 23 connector is limited for use up to 25V~/60V- Page 3 / 12

4 Inserts Number of Part No Identification contacts Male inserts Female inserts Drawing Dimensions in mm Screw termination Contact arrangement view: mating side Solder termination M F PCB pinhole pattern: PCB solder termination 2) ) Suitable only for housings, bulkhead mounting, No: , and Screw termination Contact arrangement view: mating side (numbering in opposite direction on request) Solder termination M F PCB pinhole pattern: PCB solder termination 2) Stock items in bold type 2) Suitable only for housings, bulkhead mounting, No: , and Page 4 / 12

5 Inserts Number of Part No Identification contacts Male inserts Female inserts Drawing Dimensions in mm Solder termination Contact arrangement view: mating side (numbering in opposite direction on request) M F Crimp termination for D-Sub contacts PCB hole details: PCB solder termination 2) ) Suitable only for housings, bulkhead mounting, No: , and Solder termination Contact arrangement view: mating side (numbering in opposite direction on request) M F PCB hole details: Crimp termination for D-Sub contacts PCB solder termination 2) ) Suitable only for housings, bulkhead mounting, No: , and Solder termination Contact arrangement view: mating side Stock items in bold type Page 5 / 12 M F

6 Hoods / Housings Identification Part No Pg Drawing Dimensions in mm Hood top-entry Hood top-entry EMC version _ Hood right angle entry Identification Part No Drawing Dimensions in mm Screw cover for hoods with tether Stock items in bold type Order inserts separately, see page 4-5 Bulkhead mounted housings see page 7-9 Page 6 / 12

7 Hoods / Housings Identification Part No Drawing Dimensions in mm front wall assembly with central locking Pg Panel cut out Pg 13,5 front wall assembly with central locking M Panel cut out Ø 20 +0,1 front wall assembly with flat sealing Panel cut out Ø 20 +0,1 front wall assembly with O-ring-sealing Panel cut out Ø 20 +0,1 Housing, right angled bulkhead mounting front wall assembly with O-ringsealing Stock items in bold type Panel cut out Ø 20 +0,1 Order inserts separately, see page 4-5 Bulkhead mounted housings see page 6 Page 7 / 12

8 Hoods / Housings Identification Part No Drawing Dimensions in mm back wall assembly with O-ring-sealing Panel cut out Ø 23 +0,1 Panel thickness: when using counter-sunk screws back wall assembly with O-ring-sealing Panel cut out Ø 23 +0,1 Panel thickness: when using counter-sunk screws back wall assembly with O-ring-sealing Panel cut out Ø 23 +0,1 Panel thickness: when using counter-sunk screws back wall assembly with central locking M Panel cut out Ø 25 +0,1 Panel thickness: max 6 Cable gland housing back wall assembly central locking M 25 EMC version Stock items in bold type Panel cut out Ø 25 +0,1 Panel thickness: max 6 Order inserts separately, see page 4-5 Bulkhead mounted housings see page 6 Page 8 / 12

9 Hoods / Housings Identification Part No Pg Drawing Dimensions in mm Cable to cable housing top entry Cable to cable housing top entry EMC version _ Identification Part No Drawing Dimensions in mm Screw cover for bulkhead mounted and cable to cable housings Screw cover for bulkhead mounted and cable to cable housings with tether Stock items in bold type Order inserts separately, see page 4-5 Bulkhead mounted housings see page 6 Page 9 / 12

10 Accessories Cable entry protection Part No Pg Drawing Dimensions in mm Cable sealing metal (IP 65) with normal seal Suitable cable Ø with multiple seal Special cable clamp metal (IP 65) with strain relief and bell mouth Suitable cable Ø 8-12 SW 24 normal seal order separately multiple seal order separately Assembly tools Part No Drawing Dimensions in mm for angled housings, bulkhead mounting for bulkhead mounted and cable to cable housings As an alternative a wrench can be used for hoods Stock items in bold type Page 10 / 12 Alternatively for the assembly of the EMC version a wrench can be used

11 Assembly Assembly manual Dimensions in mm Housing Cable Strip Length x mm mm mm mm mm mm mm Standard housing Hinged plastic cover Pg screw order separately Locking device Insert SW 24 EMC housing Hinged plastic cover Shielding sleeve Shielding and strain relief device IP 67 SW 24 Insert Shielding braid Ø 25 mm SW 24 Right angled housing, bulkhead mounting Sealing Insert Assembly tool Snap element Snap ring Page / 12

12 HARTING Electric GmbH & Co KG Wilhelm-Harting-Straße 1 D Espelkamp POBox D Espelkamp Germany Phone: (+49) 5772/ Fax: (+49) 5772/ HARTINGElectric@HARTINGcom Internet: http//wwwhartingcom Subsidiaries Austria, Belgium, Brazil, Czech Republic, China (Hong Kong, Shanghai, Zhuhai), Eastern Europe, Finland, France, Great Britain, Italy, Japan, Korea, Netherlands, Norway, Russia, Singapore, Spain, Sweden, Switzerland, Taiwan, USA Agencies Australia, Denmark, Finland, India, Portugal, South Afrika, Turkey Production Plants Germany Great Britain Switzerland USA