Medical Rail Systems 147
|
|
|
- Beverly Banks
- 6 years ago
- Views:
Transcription
1 Medical Rail Systems 147
2 Medical Rail Systems + unobtrusive + tidy + many variants 148
3 General Product Introduction Medical Rail Systems Different rooms, different walls - one solution: Medical rail systems from provita. The systems ensure the tidy, functional attachment of medical devices by your side. Rails can be produced according to your specification to suit any hospital ward or medical practice. By combining the provita wall mounted rail systems with the pivoting IV unit or the sliding medical rail trolleys, further flexibility and freedom of movement can be provided for patients, nursing staff and doctors. The rails, made from polished stainless steel, can bear a load of up to 100 kg per metre and allow for the attachment of multiple devices. Each rail is fitted with potential equalisation, meaning that the dissipation of static electricity is ensured. Our integrated mounting system enables simple installation. Numerous variation possibilities and an extensive range of accessories provide logical support to the tailor-made range: IV-stands, monitor shelves with or without a drawer compartment, refuse bag holders, examination lights, baskets, power outlet strips and pump holders represent just a selection from the extensive product range. 149
4 Medical Rail Systems Many product advantages to your benefit Medical Rail + + space-saving infusion and device management on any wall - in any room + + flexible arrangement of necessary caring devices + + the screwing discs with holed drills enable a quick and simple mounting + + full access to the patient thanks to a maximum floor freedom + + reduced risk of injury (risk of stumbling) + + connectors made of high quality brass guarantees electrical conductivity over the entire length of the rail + + the way it is delivered permits a time-saving assembly of the rail + + the wall rail profile has a load capacity of up to 100 kg per meter + + the screwing discs are covered with its correspondingly optical and shaped plastic rosette + + the screwing discs with a galvanized surface are to be connected strongly to the bearing wall + + every rail is equipped with an optically covered grounding ring for the safety fixation of a grounding cable of up to Ø 2,5 mm² + + complete recyclability + + the rail profile is closed on both sides with a plastic cap to prevent the risk of injury 150
5 Technical data overview IV-Poles + + effective infusion care by hanging safely IV-bottles and bags + + safe use above and below light strips and care channels + + all plastic elements are non-fading + + enough safe distance in between both tubes once the pole reached its lowest height as a precaution of risk of injury (e.g. to avoid finger traps) + + IV-Poles with parallel offset: additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube without affecting the functionality of the devices mounted on the outer tube + + stainless steel tubes in accordance with DIN EN safety bottle holder in accordance with DIN ISO prevented penetration of liquids between both tubes by a patented sealing cap Medical Wall Rail Carrier Unit + + low-noise movement of IV-Poles and medical devices along the wall rail for an optimization of operating processes + + variable positioning of care devices and components near the patient + + silent positioning through a combination of high quality nylon, stainless steel, sliding and needle bearings + + stable and swiveling + + no risk of injury because the wall rail clamps and the pivotal arm are closed with plastic caps + + can be flexibly positioned along the wall rail in the desired working area + + can be fixed in any desired working position with help of its braking lever Medical Rail Systems 151
6 152
7 Medical Rail P. 154 Medical Rail for space-saving device management IV-Poles P. 156 Professional infusion management on Medical Rails IWS-System and Medical Wall Rail Carrier Unit P. 164 Pivotable, moveable device support system for infusion and device management P. 168 Accessories Various accessories to enhance the wall rail system Medical Rail Systems 153
8 Medical Rail Medical Rail + + easily fixed to wall by rotatable pre-drilled fixings stainless steel Rosettes and end caps plastic / black Rail profile ,5 mm (W H D) Total load capacity max. 100,0 kg per running meter Surface polished (per running meter) appr. 1,5 kg Unique feature intermediate and special lengths are possible (please specify in detail); with 1 grounding pin on each rail optional plastic parts in blue or white rosettes made of stainless steel (Z2N06242) with freely positionable grounding box (Z2N06132) Configure your individual medical rail here or under Z2N2 O2 05 = 500 mm 06 = 600 mm 07 = 700 mm 40 = mm Example: Z2N22702 = Medical rail mm Z2N27241 = Rail in special length and / or with special bolt distance on customer request (length specification in meter) 154!! Calculation of fixing bolts per rail = rail length divided by bolt distance rounded to the nearest higher integer!! Standard bolt distance: 400 mm. Other distance possible on request (eg.: 500 mm or 600 mm).!! Rails longer than mm will be connected using preassembled connectors.
9 Medical Rail Connector pre-assembled at the factory brass E2N4464- The type of mounting needs to be evaluated on site. Our sales representatives and engineers would be glad to be of support if needed.!! Instructions for installation please see p. 192 Planning Tool Please use the provita planning tool for medical rails. You will save valuable time working on your projects. Medical rail-planning tool Medical Rail Systems 155
10 Series 44 Leseleuchte IV-Poles Overview IV-Poles IV-Pole with 2 wall supports I with 4 safety bottle hooks, screw height adjustment IV-Pole, 55 angled I with bottle bar 4 safety bottle hooks, screw height adjustment IV-Pole straight I I with 4 safety bottle hooks, screw height adjustment with 4 safety bottle hooks, single-handed safety height adjustment IV-Pole, 90 angled I I outer tube mm, screw height adjustment outer tube mm, screw height adjustment 156
11 IV-Pole Overview Overview IV-Poles ICU-Unit I I with 4 safety bottle hooks, singlehanded safety height adjustment with 6 safety bottle hooks, singlehanded safety height adjustment IV-Pole I I without wall support, single-handed safety height adjustment with wall support, single-handed safety height adjustment IV-Pole I I single-handed safety height adjustment screw height adjustment IV-Pole angled I I single-handed safety height adjustment screw height adjustment IV-Rod I IV-Pole I I single-handed safety height adjustment screw height adjustment Medical Rail Systems IV-Holder M IV-Pole 38/25 I !! All IV-Poles are made of high-quality stainless steel and are equipped with safety bottle hooks. Additional technical details can be found on the following pages. 157
12 IV-Pole IV-Pole with 2 wall supports + + safe use above and below light strips and care channels stainless steel 25 / 18 mm Bottle holder stainless steel 4 safety bottle hooks Load capacity 2,0 kg / hook Angled 2 90 Parallel offset 300 mm Outer tube length mm Regulating range appr mm Height adjustment screw height adjustment Distance wall to tube center 120 mm Colour of end caps white Total weight (net weight) appr. 2,5 kg I IV-Pole straight + + effective infusion care by hanging safely IVbottles and bags Outer tube length Bottle holder Regulating range Load capacity Total weight (net weight) stainless steel 25 / 18 mm mm stainless steel 4 safety bottle hooks appr mm 2,0 kg /hook appr. 2,0 kg I I singel-handed safety height adjustment screw height adjustment for further wall-mounted IV-Pole options, please see page
13 IV-Pole IV-Pole, 55 angled + + prevented penetration of liquids between both tubes by a patented sealing cap stainless steel 25 / 18 mm Outer tube length mm Distancia en paralelo appr. 300 mm Angled 1 55 Height adjustment screw height adjustment Regulating range appr mm Bottle holder stainless steel 4 safety bottle hooks Load capacity 2,0 kg / hook Total weight (net weight) appr. 2,9 kg I IV-Pole, 90 angled + + enough safe distance in between both tubes once the pole reached its lowest height as a precaution of risk of injury (e.g. to avoid finger traps) stainless steel 25 / 18 mm Distancia en paralelo 300 mm Angled 2 90 Height adjustment screw height adjustment Bottle holder stainless steel 6 safety bottle hooks Load capacity 2,0 kg / hook Total weight (net weight) appr. 3,0 kg Medical Rail Systems I I Outer tube length mm Regulating range appr mm Outer tube length mm Regulating range appr mm 159
14 IV-Pole ICU-Unit + + adjustment of the telescopic tube through a comfortable single-handed height adjustment Height adjustment Bottle bar Regulating range Total weight (net weight) Equipment single-handed safety height adjustment stainless steel 4 or 6 safety bottle hooks 2,0 kg / hook 370 mm appr. 2,1 kg with medical rail clamp, for assembling onto wall rails mm I I with 4 safety bottle hooks with 6 safety bottle hooks IV-Pole + + stainless steel tubes in accordance with DIN EN / 14 mm Height adjustment single-handed safety height adjustment Bottle holder stainless steel 3 safety bottle hooks 2,0 kg / hook Regulating range appr mm mm Outer tube length 800 mm Total weight (net weight) appr. 1,9 kg Equipment with medical rail clamp, drip glass and glass holder, for assembling onto wall rails mm I I without wall support with wall support 160
15 IV-Pole IV-Pole + + all plastic elements are non-fading 25 / 18 mm Bottle holder stainless steel 3 safety bottle hooks 2,0 kg / hook Regulating range appr mm Outer tube length mm Total weight (net weight) appr. 1,73 kg Equipment with wall rail clamp and wall support, for assembling onto medical rails mm I I single-handed safety height adjustment screw height adjustment IV-Pole angled + + additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube 25 / 18 mm Bottle holder stainless steel 4 safety bottle hooks 2,0 kg / hook Angled 2 45 Distancia en paralelo appr. 350 mm Regulating range appr mm mm Outer tube length mm Total weight (net weight) appr. 1,45 kg Equipment with medical rail clamp and wall support, for assembling onto wall rails mm Medical Rail Systems I I single-handed safety height adjustment with additional screw height adjustment to prevent a pole rotation screw height adjustment 161
16 IV-Pole IV-Pole + + the integrated blocking pull-out prevents the seperation of both telescopic tubes 25 / 18 mm Bottle bar stainless steel 4 safety bottle hooks 2,0 kg / hook Regulating range appr mm Outer tube length 800 mm Total weight (net weight) appr. 2,03 kg Equipment with 2 medical rail clamps, for assembling onto wall rails mm I I safety height adjustment screw height adjustment IV-Rod + + safety bottle holder in accordance with DIN ISO mm Bottle bar stainless steel 4 safety bottle hooks 2,0 kg / hook Length mm Total weight (net weight) appr. 1,5 kg Equipment with 2 wall rail clamps, for assembling onto medical rails mm I
17 IV-Pole IV-Pole + + space-saving infusion care Total weight (net weight) 18 mm appr. 1,8 kg Equipment stainless steel 4 safety bottle hooks 2,0 kg / hook, with medical rail clamp and wall support, for assembling onto wall rails mm M IV-Pole + + safe use above and below light strips and care channels 38 / 25 mm Bottle bar stainless steel 4 safety bottle hooks Outer tube length mm Distancia en paralelo 350 mm Angled 2 90 Height adjustment single-handed safety height adjustment with additional screw height adjustment to prevent a pole rotation Equipment with 2 wall rail clamps to mount on a wall rail 25 x 10 mm Load capacity 2,0 kg / hook Total weight (net weight) appr. 6,0 kg Medical Rail Systems I accessories see from page
18 IWS-System and Medical Wall Rail Carrier Unit Medical rail systems 164
19 IWS-System and Medical Wall Rail Carrier Unit IWS-unit + + the stable and flexible support systems allows an extensive and patient-related placement of medical devices + + for mounting infusion pumps and bottles + + easily fixed to the existing wall rail Regulating range Load capacity Total weight (net weight) Equipment mm 2,0 kg per hook / 25,0 kg per system appr. 9,0 kg 1 stainless steel tube Ø 33,7 mm, 2 horizontal arms, 2 mounting brackets for medical rails, 1 stainless IV-pole with screw height adjustment, bottle bar with 6 safety bottle hooks I !! This pivotable wall-system and the moveable wall carrier unit can be used as single parts or in combination for application pictures see page 172 Duo-Lock-System for wall rail + + compact space requirement + + horizontal adjustment in two directions Colour of plastic parts blue 25 / 18 mm Bottle holder stainless steel 4 safety bottle hooks - 2,0 kg / hook Height adjustment single-handed safety height adjustment Regulating range appr mm Outer tube length mm Equipment 2 duo-lock-systems with quick-handfastener, IV-Pole Medical Rail Systems I-DULO01 165
20 Moveable Medical Rail Carrier Moveable Medical Rail Carrier + + smooth running wall carrier unit to attach pumps, monitors and additional devices + + high quality stainless steel and nylon bearings ensure minimal noise when moving + + allows the flexibility to position devices where required Version A Version A of the carrier unit aluminium support tube stainless steel Colour of carrier unit white 38 mm Tube length mm Max. load capacity 75,0 kg Total weight (net weight) appr. 4,2 kg Equipment with 2 complete carrier units, carrier unit and tube flexibly adjustable!! Attention: Medical rails must be mounted exactly parallel to each other, with clamping lever brake at the top carrier Z2N0214A Version B Version B (like A, additionally with IV-pole) Height adjustment single-handed safety height adjustment 38 / 25 mm Bottle bar stainless steel 4 safety bottle hooks Regulating range appr mm Total weight (net weight) appr. 5,6 kg Outer tube length mm Z2N0224A optional with angled IV-pole to protect the devices from liquids Z2N0225A!! Please order the stopper-set separately. examples of use 166
21 Accessories Medical Rail Carrier Unit Accessories Medical Rail Carrier Unit Medical Rail for round tube Ø 38 mm, height adjustable through two fixing screws Profile mm Length 558 mm appr. 0,9 kg Z2N06512 Shelf for round tube Ø 38 mm, with edge protection Size mm Max. load capacity 4,0 kg appr. 2,75 kg Z2N0754A Stopper-set for Wall Rail Monitor Shelf without Drawer for round tube Ø 38 mm, with edge protection stainless steel / steel, coated Shelf dimensions mm Max. load capacity 40,0 kg appr. 6,0 kg for wall rails mm Colour Z2N0628A aluminium white Z2N0745A for application pictures see page 172 Monitor Shelf with Drawer for round tube Ø 38 mm, with edge protection shelf stainless steel drawer steel, white coated Shelf dimensions mm Drawer size mm Drawer height 120 mm Max. load capacity 40,0 kg appr. 10,1 kg Medical Rail Systems Z2N0746A 167
22 Accessories Medical rail systems Basket with clamp with wall rail clamp, to mount on wall rail 25 x 10 mm of the basket steel, coated of the claw aluminium Colour light grey Size mm (W D H) appr. 0,7 kg Basket with 2 clamps with two wall rail clamps, to mount on wall rail 25 x 10 mm of the basket steel, coated of the claws aluminium Colour light grey Size mm (W D H) appr. 1,15 kg Z2S0665N Z2S0666N Cable- /tube holder Medical Approved Plugboard vari med Colour Z2K09343 Z2K09353 plastic white for round tube 38 mm for wall rails mm with children protection (higher touch protection of plug board) of housing aluminium, anodized In accordance with norm DIN EN Z2K plug, dual fused for additional medical plugboards see and page
23 Accessories Monitor Shelf without Drawer with two medical rail clamps and wall supports, with edge protection stainless steel / steel, coated Shelf dimensions mm Max. load capacity 40,0 kg appr. 6,0 kg Z2N07442 Monitor Shelf with Drawer drawer, fully extendable, with two medical rail clamps and wall supports shelf stainless steel drawer steel, white coated Shelf dimensions mm Drawer size mm Drawer height 120 mm Max. load capacity 40,0 kg Glass Monitor Shelf without Drawer weight Z2N07432 with 1 drawer appr. 10,1 kg Z2N07532 with 2 drawers appr. 14,7 kg with two medical rail clamps and wall supports, with edge protection stainless steel / safety glass / aluminium Shelf dimensions mm Max. load capacity 40,0 kg appr. 6,0 kg Z2N07922 Shelf with two medical rail clamps, with edge protection Shelf dimensions mm Max. load capacity 4,0 kg appr. 2,75 kg Z2N07332 Glass Monitor Shelf with Drawer drawer, fully extendable, with two medical rail clamps and wall supports, with edge protection shelf safety-glass, non-transparent drawer steel, white coated Shelf dimensions mm Drawer size mm Protective edging safety rubber edging weight Z2N07932 with 1 drawer appr. 10,1 kg Z2N07942 with 2 drawers appr. 14,7 kg Glass Monitor Shelf with wall rail at the sides Medical Rail Systems optimal hygienic glass surface drawer, fully extendable, with two medical rail clamps and wall supports, with edge protection shelf safety-glass, non-transparent drawer steel, white coated Shelf dimensions mm Drawer size mm Protective edging safety rubber edging wall rails stainless steel Length of each wall rail 320 mm Rail profile ,5 mm (W H D) Z2N
24 Accessories Trash Holder with wall rail clamp, to mount on wall rail mm Size mm (W H D) appr. 2,0 kg Unique feature complete with 3 trash bags Z2N06202 Examination Lamp Colour of lamp white Light source halogen bulb with cold light reflector, 12 V / 35 W IRC, 10 Light colour appr (3.700) 1 K Light output appr lux / 500 mm appr lux / mm Light field 90 / 180 mm at 500 / mm Life expectancy appr h (light source) Electrical mains 230 V, Hz Switch in lamp housing / in handle (Ceiling / Wall version) 1) with colour correction filter Clamps to fit lamps, IV-poles as well as additional equipment, to mount on wall rail mm aluminium, ball burnished appr. 0,4 kg L100020A wide range of lamps see pages 12 to 45 Set of 2 Medical Rail Clamps Z2N0643W Z2N0647W Z2N0650W with headless screw, with socket Ø 18 mm with t-screw, with socket Ø 18 mm with t-screw, with socket Ø 25 mm with Ø 25 mm socket, for bridging two wall rails with different installation depths aluminium Colour white appr. 0,8 kg Unique feature 1 clamp adjustable ( mm) 1 clamp fixed length Holder for pumps Z2N0618A with wall rail clamp, to mount on wall rail mm 25 mm Length 500 mm appr. 0,95 kg Z2N07162 Joint Arm with hose clamps (appr. Ø 23 mm), without medical rail clamp chrome plated Working radius appr mm Joining pin Ø 18 L 35 mm appr. 2,0 kg Z2S
25 Accessories Gloves dispenser, 3-fold for wall rail with wall rail clamp, to mount on wall rail mm Outer size mm (W H D) Inner size (each compartment) mm (W H D) appr. 2,5 kg Catheter basket stainless steel Mounting two hooks for wall rail appr. 0,5 / 0,8 kg Z2N mm (W H D) Z2N mm (W H D) Z2N65522 Gloves dispenser, 2-fold for wall rail with wall rail clamp, to mount on wall rail mm aluminium, coated Colour silver Size mm (W H D) appr. 1,3 kg Claw with quick-release lever to mount on wall rail mm aluminium, anodized appr. 0,1 kg Z2N0932W Z2N09353 Gloves dispenser, 3-fold for wall rail with wall rail clamp, to mount on wall rail mm aluminium coated Colour silver Size mm (W H D) appr. 1,5 kg Z2N09363 Catheter Storage Box, dust-tight stainless steel Fixing welded-on hook rail for attachment to carts or medical rails Hygiene with hinged, bevelled cover and base for easy cleaning; autoclavable Z2N mm Z2N mm Z2N mm + + Enables dust-tight, hygienic storage + + Catheters will not be bended Medical Rail Systems!! Can optionally be ordered with inspection window or subdivision!! The hinged base can be folded away for easy cleaning from top and bottom 171
26 Application examples 172
27 Application examples Medical Rail Systems 173
Area of use The Provita wall rail system is suitable for use
WALL RAILS GENERAL WALL RAILS Area of use The Provita wall rail system is suitable for use in normal wards in intensive care wards in pre-operation rooms in the recovery room in doctors surgeries. Due
BIOMEDICAL ACCESSORIES
BIOMEDICAL ACCESSORIES Biomedical equipment EXAMINATION LAMPS LED LED lamp on articulated arm with clamp Light output 15000 Lux / 0.5 m Field of illumination 460 mm Color temperature 4000 K CRI > 85 For
provita medical for your life
provita medical for your life When concerning people s health, devices that come to the use, should ease the work of the helpers. The extensive line up of provita s IV-Poles achieve even more than an important
Organisational Kitchen Fittings Drawer and Front Extensions
GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism
IV Pole/Stand Provita Smart IV Stand Telescoping One-Hand Operation
IV Pole/Stand Provita Smart IV Stand Telescoping One-Hand Operation 1-hand telescoping safety operation Height Range: 1300-2100mm Stable five star weighted base 4-hook or 2-hook IV holder Colour coordinated
TruPort Supply Unit. Accessories
TruPort Supply Unit Accessories Ready for every assignment. Accessories for the TruPort Supply Unit: optimized for daily use. Medical workstations in ICUs and operating rooms are subject to new challenges
Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
Snap locks and door locks
TopLine Cabinets - type A The modern design of the TopLine cabinets creates a visual calmness in the department. Behind the calm exterior you will find a highly functional diverse interior with endless
Single action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
SYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
INTEGRIS B SERIES HEADWALL SYSTEM ACCESSORIES
INTEGRIS B SERIES HEADWALL SYSTEM ACCESSORIES INTEGRIS B SERIES HEADWALL SYSTEM ACCESSORIES 1 IV Pole Management Solutions P17000801 Ventilator Mount 16 swing arm holds an adjustable pole 20 long and 1
STAINLESS STEEL TROLLEYS
STAINLESS STEEL TROLLEYS Single-sided and double-sided trolleys. Made of 18/10 stainless steel, fully welded. Suitable for transporting and storing baskets and accessories in general. Composed by a square
Maquet Moduevo Ceiling Supply Units. Accessories catalog
Maquet Moduevo Ceiling Supply Units Accessories catalog About this catalog This catalog provides an overview of the Maquet Moduevo range of ceiling supply units. It is divided into four categories based
LEONARDO MULTIPOWER Quartz Halogen Fresnel Spotlight
LEONARDO MULTIPOWER Quartz Halogen Fresnel Spotlight Mod. 320.700 Mod. 321.700 FEATURES The Leonardo MULTI-POWER is a compact, highly efficient 250 mm. diameter Fresnel lens spotlight capable of accepting
Integris C Series Headwall System and Equipment Rail Accessories
Integris C Series Headwall System and Accessories 25 Mounting Levels Integris 2001C 2001C Upper 2001C Lower (Lower Accessory Rail accessory as shown on next page) Integris 2002C 2002C Upper 2002C Lower
ALUMINIUM MOBILE SOLUTIONS MEDICAL
ALUMINIUM MOBILE SOLUTIONS MEDICAL 2 - MEDICAL Baccarat FEATURES Multi-purpose nursing trolley with 6 levels for module baskets 6 runners with stop at both ends to secure baskets even when they are pulled
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Clinical Support Products. Supporting your clinical care in so many ways.
Clinical Support Products Supporting your clinical care in so many ways. Quality Products for Quality Care Hampers & Carts A single, convenient source for so many solutions. Durable designs you can depend
Elabo TaMo. Mobile carrier system for industrial use
Elabo TaMo Mobile carrier system for industrial use Elabo TaMo Modular carrier system M-Frame TaMo is conceived modularly. The M-frame basic carrier consists of the pivoting casters, the bottom plate which
TOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S)
TOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S) Rev D TOPRAIL SHELVING / PROPRIETARY STORAGE SYSTEM DESCRIPTION: Rail hung storage system. All items are hung from the rail/uprights - only
Chapter 5 SHELF STOPPER
Chapter 5 SHELF STOPPER Perforated labels clamp page 70 Super gripper T page 72 Fla g s page 74 The promotions, special offers or price reductions must be always announced at the shelf by visible posting
MIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
13.1. Accessories for Workbenches
Workbenches Accessories Accessories for Workbenches Directory 13.2 Carrying Rollers and Ball Transfer Units for Worktops 13.3 Profi Overhead Frame 13.4 Carriers Rail for Profi Overhead Frame. 13.5 Profi
opuc p. 92 The opuc20 socket can be loaded with 30 kg. Also overlapping presentation in centre 625 mm is possible.
p. 9 opuc The opuc0 socket can be loaded with 30 kg. Also overlapping presentation in centre 65 mm is possible. The brackets are inserted and glued from rear into wooden shelves. This customised side hanging
EcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
Horizontal. Accessories. Vertical
Horizontal Vertical Fixed Utility Shelf Horizontal Mount Fixed Shelf 12 x 12 7510-1012 Fixed Shelf 17 x 12 7510-0006 7511-1012 Hinged Shelf 12 x 12 Hinged Shelf 17 x 12 7511-1012 7511-0006 Hinged Mayo
GALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD
ALVANIZED-COATED SHELFIN SYSTEM SHELVIN FOR FOOD ALVANIZED COATED SHELVIN ALVANIZEDRAL 7035 Entirely made of first grade steel and cold-profiled with galvanized steel according to the Sendzimir process
b e t t e r p a t i e n t c a r e g r e a t e r a d a p t a b i l i t y
Patient Care Accessories b e t t e r p a t i e n t c a r e g r e a t e r a d a p t a b i l i t y www.interspecsystems.com EXPERIENCED AT PROVIDING QUALITY PATIENT CARE SOLUTIONS As Canadian innovators
workstation acessories ErgoChair ergonomic chair designed for the factory worker
workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production
37 Polished Stainless Steel
80 BAWER 81 82 1,5 mm SERIES BAWER 37 37 Polished Stainless Steel Example of fitting-out Stainless Steel AISI 304/X5CrNi18-10/1.4301-2R Thickness mm 1,5 Mechanical resistance; water resistance Laser and/or
19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
Immunity: EN capacity 75 µl Capillaries. 1,5 x 75 mm. Rotor and Lid as evaluation disc incl. Cat.-No. capillaries per rotor
CENTRIFUGES BOECO HEMATOCRIT CENTRIFUGE H-240 High-speed bench-top centrifuge for microhematocrit determinations with brushless frequency drive. At 16.060 g sedimentation is completed in just a little
THE ART OF SUCCESSFUL MERCHANDISE Professional information and communication with OCTANORM Display Systems. presentation systems
THE ART OF SUCCESSFUL MERCHANDISE Professional information and communication with OCTANORM Display Systems presentation systems AESTHETIC PRESENTATION AS A DESIGN PRINCIPLE Attract attention at your event,
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
Grommets & OFFICE Accessories
Groets & OFFICE Accessories SISO A/S MILEPARKEN 11 DK - 2740 SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+45) 45 830 900 FAX: (+45) 45 830 444 DISTRIBUTOR Contents GROMMETS 4-13 WIRE MANAGERS 14-17 keyboard
Door stopper, wall mounting 4-7 Door stopper, floor mounting 8-9. Door stopper, wall mounting 10 Door stopper, floor mounting 11
oor stopper : 8 Content oor stopper Seite Satin stainless steel oor stopper, wall mounting 4-7 oor stopper, floor mounting 8-9 Stainless Steel,black oor stopper, wall mounting 0 oor stopper, floor mounting
icore Kiosk system Installation Guide
icore Kiosk system Installation Guide The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights,
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
OTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
EquiSys Cable Integrated Mounting System. Mounting Reference Guide. for Spacelabs
Mounting Reference Guide for Spacelabs Valid from January 2010 Rev. SL_01_2010/ EN Last up-date 29/09/09 Valid from 01/01/10 Content page 1. General Notes....... 3 2. European Rail Mounts for mcare/ Ultraview
- Classic design for bedside procedures. Flat Shelf, 19 wide x 13 deep. - Securely holds a variety of equipment items.
#DV-1009-010 #DV-1009-011 Mayo Tray, hinged, 13-5/8 wide x 9-3/4 deep Mayo Tray, hinged, 17-1/8 wide x 11-5/8 deep - Classic design for bedside procedures. - Hinged design allows tray to be folded out
July Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
Instrument Prep & Pack Tables... Ergonomic/Hydraulic
Instrument Prep & Pack Tables... Ergonomic/Hydraulic KTW Medical offers the finest ergonomic solution with push button height adjustability. Designed to maximize productivity and reduce overexertion we
TRADUR. Supporting elements. Balance. Supporting elements
TRADUR Balance columns have been ignored by designers for much too long. Only through new thinking in complex design contexts can contemporary design language come into its own both above and below the
Combi range. Professional lighting equipment for general purpose stages. professional lighting for the performing arts
Combi range Professional lighting equipment for general purpose stages professional lighting for the performing arts General features Combi range Ventilation slots on the rear housing for efficient cooling
Edge finder with illuminated display
Edge finder with illuminated display For positioning reference points on metallic workpieces Two-axis and three-axis measurements available Can also be used to determine the centre or diameter of a bore
Lighting booms provide the ideal unobtrusive way to position lighting and reflector gear directly above the subject. 6.1
6.0 Zeferino 6 Lighting Booms Lighting booms provide the ideal unobtrusive way to position lighting and reflector gear directly above the subject. 6.1 Lighting Booms It is all a question of balance. Boom
Injection molded ABS trays and inserts. Beaded edge on trays for label holders.
Modules Trays and boxes Injection molded trays and inserts. Stackable. Pre-perforated on edge for mounting safety stops. Beaded edge on trays for label holders. Inserts and partitions for compartmentilizing.
SUPER LEDF10HP DATASHEET
DATASHEET LED Fresnel Spotlight 330W - CRI>95 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F10HP is a high efficiency Fresnel lens spotlight using the innovative High Power
WINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
5. Office furniture. 5. Office furniture. Laboratory furniture. Flexible and customised
5. Office Flexible and customised 5. Office Laboratory Your laboratory staff needs a thoughtfully planned office or work area and we have just the you have been looking for. Functional and customised to
3D-Welding Table Systems
3D-Welding Table Systems www.tempus-holding.de Contents 3D-Welding Table Systems SST-Fix Series & SSTW-Fix Series 2 SST-Flex Series & SSTW-Flex Series 4 SST Accessory Kits 6 Assembly Tables SMT-Fix Series
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary
OUTDOOR BASKETBALL OVERHANG 2.25 M - COMPETITION SQUARE STEEL TUBE 140 X 140 MM
OUTDOOR BALL OVERHANG 2.25 M - COMPETITION CONFORMS TO THE SPORT CODE AND NF EN 1270 NORM The competition basketball is played with a ring 3,5 m high in France, for departmental and regional competitions,
MUNDUS. The patch fitting with a unique design for toughened glass assemblies. MUNDUS Premium for unique, customised toughened glass assemblies.
MUNDUS Premium for unique, customised toughened glass assemblies. MUNDUS The patch fitting with a unique design for toughened glass assemblies MUNDUS Comfort for demanding toughened glass assemblies. dormakaba
Finnish mobile workstations for professionals
Finnish mobile workstations for professionals Manufactured in Finland 918 SPARKe 53 mobile workstation with keyboard and mouse tray SPARKe 53 mobile workstation combines the features of the most popular
SUPER LEDF6 DATASHEET
SUPER DATASHEET LED Fresnel Spotlight 120W - CRI>96 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F6 is a high efficiency Fresnel lens spotlight using the innovative High Power
Instruction Manual. Version 1.2
Instruction Manual Version 1.2 Elation Professional 4295 Charter Street Los Angels CA 90058 e-mail: info@elationlighting.com Web site: www.elationlighting.com (V1.2) 2 Contents 1 Introduction...5 1.1 Safety
STORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
BUYING GUIDE ALGOT. Storage across the home. DESIGN Francis Cayouette
BUYING GUIDE ALGOT Storage across the home DESIGN Francis Cayouette QUALITY Designed for use throughout the home. ALGOT shelves are hardwearing, stain resistant and easy to keep clean. Brackets are made
BPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
BPL SERIES INSTALLATION INSTRUCTIONS Important Warning THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This product must be installed in accordance with National Electrical
Operating Instructions USM Haller Tables
1 Introduction 1.1 Type description 1.2 General safety instructions 1. Safety precautions 1.4 Cleaning, water protection 1.5 Clamping protection 1.6 Maximum load 1.7 Storage instructions 1.8 Transport
IBIS. Duct diffuser with discs for supply air QUICK FACTS
Duct diffuser with discs for supply air QUICK FACTS 0 flexible distribution pattern Suspended installation Easy installation Modular length: 00 mm Standard colour White RAL 900 -- alternative standard
Modular Structural Parts
Even complicated residual limb positions are easy to supply, moreover there are manifold options to do so. We offer a wide variety of elaborate modular structural parts that enable you to align functional
Further Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
Storage Cabinets. Drawer Type (ordered separately) (ordered separately)
Storage Systems Storage Cabinets Cabinets, which combine a stylish industrial design with practical accessories to provide flexible and efficient small parts storage. Available in two cabinet sizes, 21.65
ulrich medical Tourniquets
ulrich medical Tourniquets Combining ease of use with safety Secure application with 2 clicks Tourniquets 1 100 years of reliability and German precision Tourniquets by ulrich medical stand for quality
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
SCREENIT A30 A wooden frame filled with A-classed noise absorbing material, pinable and with foam laminated fabric. 40 mm thick.
desk AND FLOOR SCREENS An easy way to create a personal space, even in the most open office landscape. ScreenIT table and floor screens provide protection and privacy against noise while maintaining an
BEAVER TECHNOLOGY SERVICES
BEAVER TECHNOLOGY SERVICES EMPOWERED E E BY INNOVATION N O N CONTENTS CUSTOM FABRICATION ENGINEERING & CONSULTING SERVICES... 2 TRIPODS & ACCESSORIES... 3 HOISTS, DAVITS, CRANES & ACCESSORIES... 4 PORTABLE
GRIP EQUIPMENT. Grip Equipment
GRIP EQUIPMENT Doughty Grip Equipment is a range of British designed and manufactured lighting support for studios and locations of all types. These products have been manufactured for a high degree of
InForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
BUYING GUIDE ALGOT. Storage across the home. DESIGN Francis Cayouette
BUYING GUIDE ALGOT Storage across the home DESIGN Francis Cayouette QUALITY Designed for use throughout the home. ALGOT shelves are hardwearing, stain resistant and easy to keep clean. strength steel and
Accessories. Optional extras. About Accessories
Accessories Optional extras About Accessories Enhance your office furniture with this range of accessories. Monitor arms provide the ideal solution for additional desk top space while creating the perfect
ALGOT BUYING GUIDE. Storage across the home DESIGN QUALITY SAFETY GOOD-TO-KNOW
BUYING GUIDE ALGOT Storage across the home DESIGN Francis Cayouette QUALITY Designed for use throughout the home. ALGOT shelves are hardwearing, stain resistant and easy to keep clean. Brackets are made
capacity 75 µl Capillaries 1,5 x 75 mm Rotor and Lid as evaluation disc incl.
CENTRIFUGES BOECO HEMATOCRIT CENTRIFUGE H-240 High-speed bench-top centrifuge for microhematocrit determinations with brushless frequency drive. At 16.060 g sedimentation is completed in just a little
FABRICATED PRODUCT RANGE
FABRICATED PRODUCT RANGE Mobile: +27(0)82 556 0793 Tel / Fax +27(0)11 472 0460 E-Mail: info@kraftig.co.za Website : www.kraftig.co.za Johannesburg / South Africa MOBILE LIFTING GANTRY Chain block and crawler
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
ipuc p. 74 The big steel shelves with the brass patina became the special challenge in this project.
p. 74 is a single point system with rectangular sockets in two dimensions and with different load capacities. Both sockets 0 and 5 can be installed into wooden materials and acrylic walls. 3 The big steel
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
Tube Holders / Support Arms
Tube Holders / Support Arms Anesthetic Tube Holders with flexible rod - adjustable in height, length of support arm: 38 cm - clamp and holder optional according to schema Swivelling universal tube holder
KWS Modular System for Door Handles The stable and rapid solution for DIY. Building hardware
The stable and rapid solution for DIY Building hardware Contents Contents Contents... Page The KWS Modular System... Page 3 The series: Structure of modular support... Page 4 Complete door handles... Page
ORDER GUIDE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s
ORDER GUIDE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s Configurations Confirgurations #60210 series Worksurface mount LCD arm Selections 2. Adjustable arm 3. Extension arm Numbers #22-04-3 #22-04-5
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
COUNTER TOP. Monitor adaption Colours to choose
COUNTER TOP Monitor adaption Colours to choose Max. load monitor adaptation Part number All free-standing counter tops have to be tip-tested for stability depending on the!weight of the monitor! VESA 75,
Horizontal folding shutter system - Slides in top track No bottom track required - Great for curves. Versatile Unobtrusive
Horizontal folding shutter system - Slides in top track No bottom track required - Great for curves User friendly Easy to maintain Versatile Unobtrusive Spans wide openings Elegant Security solutions for:
CATALOGUE 2018/19: WORKSTATIONS & TABLES
CATALOGUE 2018/19: WORKSTATIONS & TABLES +61 7 5478 9977 sales@smartlinemachinery.com www.smartlinemachinery.com PO Box 532, Buderim, Qld, 4456 55 Cordwell Rd, Yandina, Qld, 4561 Catalogue 2018/19 Workstations
User Manual. Trinocular Stereo Microscope
User Manual Trinocular Stereo Microscope Model V434 XV434 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 2 1. Component Illustration... 3 2. Installation 4 3. Operation....6
R u b b e r d i s t r i b u t o r
Rubber distributor The modular rubber distributor series We live in a fast-moving time. It is also frequently necessary to make modifications to power distribution systems. Power distributors used in industrial
TV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
other sizes available on request
ratiolab Cryo Boxes, Cardboard, Format 133 x 133 mm ratiolab Cryo Boxes, Cardboard, Format 133 x 133 mm Ultra low temperature-resistant cardboard. temperature-resistant down to 80 C available with a water-repellent
Table of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135.
Sheet Metal Part No Galv Sheet 800 x 600 x 0.55mm F106765 $11.50 $9.20 10 Galv Sheet 800 x 600 x 0.75mm F106766 $14.70 $11.70 10 Galv Sheet 800 x 600 x 0.95mm F105143 $24.70 $19.80 10 Aluminium Sheet (H34)
Display Systems SYSTEMS. Display with Elegance
Display Systems SYSTEMS Display with Elegance TABLE OF CONTENTS SMART ROLLER BANNER...2 QUICK BANNER...3 SNAP FRAME 25MM PROFILE / 45...4 BEST BUY LEDBOX SINGLE SIDED...5 WALL SIGN SYSTEM...6 WALL MOUNTED
* See following pages for Assembly Breakdowns HMD914 Magnet Base Drill (120v Standard Base) HMD914 Magnet Base Drill
00 HMD Magnet Base Drill (0v Standard Base) 00 HMD Magnet Base Drill (0v Swivel Base) Item Qty Part No. 00 Description (0v standard base) a 0 (0v swivel base) 00 (0v standard base) a 0 0 Drill Housing
Linear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM
IAB INSTRUCTION MANUAL MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM Required Tools Drill with 5/16 Drill Bit MIDSIZE VEHIGLES M1105 50 [ ] M1100 60 [ ] M1150 72 [ ] M2105 50
ergonomics design flexibility
STORAGE SYSTEMS ergonomics design EXPERT SOLUTIONS FOR PROFESSIONALS We focus on two product lines: technical furniture and storage systems. As professionals we recognize our customers needs and know how
Catalogue 2018/19 UK System 900
Catalogue 2018/19 UK System 900 Accessories Support Grip Sit HEWI Sanitary 1 System 900 Design and function System 900 has been designed for use in the professional care sector. Sophisticate design in