ALEXA Mini. Price List - EU 05/2018

Transcription

1 LEX Mini Price List - EU 05/2018

2 LEX Mini Price List - EU 05/2018 TBLE OF CONTENTS Cameras LEX Mini Camera 3 Camera ccessories and ccessory Sets Lens Mounts & Lens dapters Battery dapters ccessory Sets Cases Raincovers Viewfinders Electronic Viewfinders and ccessories 12 Monitors Monitors 13 Licenses, Upgrades and Extended Warranties Licenses Extended Warranties Media CFast 2.0 Media, dapters and Docks USB Media Cables and Power Supplies Viewfinder Cables Power Supplies and Power Cables Non-ECS Cables Electronic Control System GPIO/EXT Sync Wireless Compact Unit WCU-4 Single xis Unit SXU-1 ccessories for WCU-4 and SXU-1 Hand Units Master Grips ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective ll previous price lists are obsolete Technical Data are subject to change without notice

3 LEX Mini Price List - EU 05/2018 TBLE OF CONTENTS Mini Motor Controllers ctive Lens Motor cforce mini ctive Lens Motor cforce plus ccessories for CLM-5 and cforce mini Motors LCUBE converters LBUS Cables Ultrasonic Distance Measure UDM-1 ECS Camera Sets Support Systems LEX Mini Camera Specific Support Systems Film Style Bridge Plate Sets Bridge Plate Sled Bottom dove-tail plates Quick Release Baseplate Quick Release HD Baseplate QR-HD1 Lens Support Top Handle Support Handgrips and Shoulder Support Recorder/Battery Bracket Support Rods Ø 15 mm Support Rods Ø 19 mm Mounting Hardware Electronic Viewfinder Brackets and Sets Follow Focus Systems Mini Follow Focus MFF-2 Studio Follow Focus-4 Studio Follow Focus-5 Focus Knobs ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective ll previous price lists are obsolete Technical Data are subject to change without notice

4 LEX Mini Price List - EU 05/2018 TBLE OF CONTENTS Marking Disks for Follow Focus Follow Focus ccessories Follow Focus Gears Matte Boxes Mini Matte Box MMB-2 Lightweight Matte Box LMB 4x5 Lightweight Matte Box LMB 4x5 Clamp dapters Lightweight Matte Box ccessories for LMB 4x5/LMB-25/LMB-15/LMB-5 Lightweight Matte Box LMB-6 Lightweight Matte Box ccessories for LMB-25/LMB-6 Studio Matte Box SMB-1 Studio Matte Box SMB-2 Matte Box Cases Filter Frames Diopter Frames 90 Rings MMB-2 Rings 91 RRI Filter Rota Pola Frame 95 Cine Primes 35mm RRI Ultra Prime RRI Ultra Prime Cases Cine Zooms 35mm RRI lura Zoom 99 Cine Zooms 35mm Extender RRI lura Extender 99 Lens ccessories Optical Cleaning Items 100 ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective ll previous price lists are obsolete Technical Data are subject to change without notice

5 LEX Mini Price List - EU 05/2018 TBLE OF CONTENTS Crew Supplies Bags 101 RRI cademy RRI Certified User Training RRI dvanced Service Training Notes Notes 107 ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective ll previous price lists are obsolete Technical Data are subject to change without notice

6 Cameras LEX Mini Camera 0100 LEX Mini Camera K LEX Mini Body LEX Mini Body with preinstalled RRI Look Library License. K x LEX Mini Body x LEX Mini RRI Look Library License Key K LEX Mini Body with 4:3 and RRIRW LEX Mini Body with preinstalled licenses for RRI Look Library, MXF/RRIRW, 4:3 and Open Gate functionality. K x LEX Mini Body x LEX Mini RRIRW License Key x LEX Mini 4:3 License Key x LEX Mini RRI Look Library License Key Page 3

7 Camera ccessories and ccessory Sets Lens Mounts & Lens dapters crucial element of this system is the LPL lens mount, optimized for large-format sensors. wider diameter and shorter flange focal depth allows the RRI Signature Prime lenses and all future large-format optics to be small and lightweight, with a fast T-stop and pleasing bokeh a combination of features that would not be possible within the confines of the PL lens mount. LPL lenses will only have LDS contacts at the 12 o clock position and accept LDS-2 and /i signals. The PL-to-LPL adapter allows the use of Super 35 PL mount lenses and of full-frame PL mount lenses 0200 Lens Mounts & Lens dapters K RRI LPL Mount LEX Mini/MIR LPL/M-LM/MI K Titanium PL LDS mount with LBUS gr Titanium mount for PL mount lenses. Includes LBUS connector for cforce-type lens motors. Fits both, LEX Mini and MIR, but only LEX Mini supports LBUS connector. K PL LDS Lens Mount gr PL LDS lens mount for PL mount lenses. Includes 12pin Hirose connector for ENG style lenses. Fits LEX Mini and MIR. K B4 Lens Mount B4 lens mount with optical, mechanical and electronic interfaces for B4 mount lenses. Fits LEX Mini and MIR. K EF Lens Mount EF lens mount with interface for iris control. Fits LEX Mini and MIR. K PL to B4 Lens dapter mechanical and optical adapter that allows the use of B4 mount lenses on cameras with a PL mount. Fits LEX Mini and MIR. Page 4

8 Camera ccessories and ccessory Sets K PL-to-LPL dapter 998 n adapter that can be used to attach PL mount lenses to a camera with an LPL mount. Compatible with RRI LDS-1 and Cooke /i. Short code: LPL/M-PL. Page 5

9 Camera ccessories and ccessory Sets Battery dapters 0300 Battery dapters K V-Mount dapter Plate Mk II for LEX Mini gr 142x82x26 mm Solid battery adapter made of aluminum. The dapter Plate Mk II features a 8-pin Lemo connector for battery input aimed at cables such the RRI KC-50 K Gold Mount dapter Plate MkII, LEX Mini gr 142x82x21 mm Solid battery adapter made of aluminum. The dapter Plate Mk II features a 8-pin Lemo connector for battery input aimed at cables such the RRI KC-50 K V-mount Power Splitting Box MkII gr 169x82x46 mm The Power Splitting box is a proven battery solution featuring various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the RRI KC-50. console can be attached to mount the Splitting box to standard 15mm LWS rods K Gold Mount Power Splitting Box Mk II gr 169x82x41 mm The Power Splitting box is a proven battery solution featuring various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the RRI KC-50. console can be attached to mount the Splitting box to standard 15mm LWS rods K V-mount battery plate with hot-swap buffer The Smart PU benefits fast-paced filming by keeping camera and accessories powered during battery changes. The advanced hot swap camera power supply is a compact unit available as V-mount and Gold Mount. It features an on-board battery buffer as well as six independent accessory outputs. Includes: Bottom Support bracket for 15mm LWS rods Operations manual Page 6

10 Camera ccessories and ccessory Sets K Gold-mount battery plate with hot-swap buffer The Smart PU benefits fast-paced filming by keeping camera and accessories powered during battery changes. The advanced hot swap camera power supply is a compact unit available as V-mount and Gold Mount. It features an on-board battery buffer as well as six independent accessory outputs. Includes: Bottom Support bracket for 15mm LWS rods Operations manual K Cable Smart PU LEX Mini 1.85m (6') 170 2pin Lemo to 8pin Lemo power cable for Smart PU power supply K Cable Smart PU LEX Mini 0.80m (2.6") 170 2pin Lemo to 8pin Lemo power cable for Smart PU power supply K Cable Smart PU LEX Mini 0.25m (0.8") 170 2pin Lemo to 8pin Lemo power cable for Smart PU power Supply K Cable XLR4 Smart PU 1.85m (6") 130 2pin Lemo to 4pin XLR 12V external power cable for Smart PU power supply K Top angled rod bracket 15mm LWS 200 To mount the Smart PU power Supply from top-mounted 15mm LWS rods, with a slight angle. K Handle frame clamp for DJI Ronin 120 To mount the Smart PU power supply to DJI Ronin stabilizer Frames. K Handle frame clamp for MoVI 140 To mount the Smart PU power supply to MoVI stabilizer frames Page 7

11 Camera ccessories and ccessory Sets ccessory Sets ccessory sets for LEX Mini come in three main category: Studio, Cine and Broadcast. n upgrade set is available for existing users. ll sets, with the exeption of the upgrade set, include either a V-mount or Gold-Mount battery solution ccessory Sets KK Studio Upgrade Set 19mm for LEX Mini gr 390x530x130 mm The Studio Upgrade Set adresses users of an existing set of RRI accessories for LEX Mini who wish to complete their existing accessory set with the main elements from the Studio set for LEX Mini. Note that this upgrade set does not include a battery solution. Includes: K x Mini Side Bracket MSB-2 for LEX Mini K x Compact Bridge Plate CBP-1 19mm K x Bottom Plate 300mm/12in K x Rear ccessory Bracket RB-1 for LEX Mini K x RB-1 Clamp K x Side ccessory Bracket SB-1 K x Single Support Rod 90mm, 3.5in, Ø19mm K x Single Support Rod 150mm, 5.9in, Ø19mm K x Stabilizer Plate for CBP KK Studio 19mm Set LEX Mini V-Mount Comprehensive set of mechanical accessories for LEX Mini allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MXIM and Trinity. The Studio set for LEX Mini includes an advanced battery solution with power distribution stage and power input for block batteries. Set Includes: K x Rod Mounting Bracket RMB-3 K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Mini Side Bracket MSB-2 for LEX Mini K x Compact Bridge Plate CBP-1 19mm K x Bottom Plate 300mm/12in K x Rear ccessory Bracket RB-1 for LEX Mini K x RB-1 Clamp K x Side ccessory Bracket SB-1 K x V-mount Power Splitting Box MkII K x 15mm Reduction Insert K x Mini dapter Plate MP-1 K x Single Support Rod 150mm, 5.9in, Ø19mm K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-2, LEX Mini K x Stabilizer Plate for CBP K x Single Support Rod 90mm, 3.5in, Ø19mm Page 8

12 Camera ccessories and ccessory Sets KK Studio 19mm Set LEX Mini Gold Mount Comprehensive set of mechanical accessories for LEX Mini allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MXIM and Trinity. The Studio set for LEX Mini includes an advanced battery solution with power distribution stage and power input for block batteries. Set K x 15mm Reduction Insert K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Mini Side Bracket MSB-2 for LEX Mini K x Compact Bridge Plate CBP-1 19mm K x Bottom Plate 300mm/12in K x Rear ccessory Bracket RB-1 for LEX Mini K x RB-1 Clamp K x Side ccessory Bracket SB-1 K x Rod Mounting Bracket RMB-3 K x Single Support Rod 90mm, 3.5in, Ø19mm K x Mini dapter Plate MP-1 K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-2, LEX Mini K x Stabilizer Plate for CBP K x Gold Mount Power Splitting Box Mk II K x Single Support Rod 150mm, 5.9in, Ø19mm KK Cine Set for LEX Mini V-Mount This set comprises the original classic mechanical accessories for LEX Mini, as well as a set of cables and a battery adapter plate. Set K x Mini dapter Plate MP-1 K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Mini Side Bracket MSB-2 for LEX Mini K x Side ccessory Bracket SB-1 K x Bridge Plate dapter BP-4 K x Rod Mounting Bracket RMB-3 K x 15mm Reduction Insert K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x Support Rods 340mm, Ø15mm K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-1 K x Battery dapter Plate BP-2, LEX Mini K x Shoulder Pad CSP-1 K x Low Bracket for CSP-1 K x V-Mount dapter Plate Mk II for LEX Mini Page 9

13 Camera ccessories and ccessory Sets KK Cine Set for LEX Mini Gold Mount This set comprises the original classic mechanical accessories for LEX Mini, as well as a set of cables and a battery adapter plate. Set K x Mini dapter Plate MP-1 K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Mini Side Bracket MSB-2 for LEX Mini K x Side ccessory Bracket SB-1 K x Bridge Plate dapter BP-4 K x Rod Mounting Bracket RMB-3 K x 15mm Reduction Insert K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x Support Rods 340mm, Ø15mm K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-1 K x Battery dapter Plate BP-2, LEX Mini K x Shoulder Pad CSP-1 K x Low Bracket for CSP-1 K x Gold Mount dapter Plate MkII, LEX Mini KK Broadcast Set for LEX Mini V-Mount ccessory set based on the Broadcast plate for LEX Mini and its counterpart, the quick release plate QRP-1. This set allows quick transition from handheld to tripod configuration. Set Includes: K x Broadcast Plate for LEX Mini K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Side ccessory Bracket SB-1 K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x Support Rods 340mm, Ø15mm K x Handgrip with on/off switch RS-3 pin K x Handgrip without on/off switch K x Handgrip Extension 240mm K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-1 K x Stabilizer Plate for CBP K x V-Mount dapter Plate Mk II for LEX Mini Page 10

14 Camera ccessories and ccessory Sets KK Broadcast Set for LEX Mini Gold Mount ccessory set based on the Broadcast plate for LEX Mini and its counterpart, the quick release plate QRP-1. This set allows quick transition from handheld to tripod configuration. Set Includes: K x Broadcast Plate for LEX Mini K x Mini dapter Plate MP-2 K x Mini Side Bracket MSB-1 for LEX Mini K x Side ccessory Bracket SB-1 K x Mini Viewfinder Bracket MVB-1 K x Center Camera Handle CCH-2 K x Handle Extension Block, HEB-1 K x Support Rods 340mm, Ø15mm K x Handgrip with on/off switch RS-3 pin K x Handgrip without on/off switch K x Handgrip Extension 240mm K x MIR Power Cable Straight 2m/6.6in KC-50 K x Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S K x EXT-RS dapter LEX Mini K x Battery dapter Plate BP-1 K x Stabilizer Plate for CBP K x Gold Mount dapter Plate MkII, LEX Mini Cases 0600 Cases K Camera and ccessories Case 340 RRI branded Peli 1510 Carry On case for accessories, cabin size with flexible dividers. Raincovers 0700 Raincovers K Wetsuit for LEX Mini gr 330x290x10 mm The camrade wetsuit RRI LEX Mini is a rain cover that protects your RRI LEX Mini camera against the elements. It is made of water-resistant fabric with a soft lining and minimalizes unwanted sound effects during operation. Page 11

15 Viewfinders Electronic Viewfinders and ccessories 0200 Electronic Viewfinders and ccessories K LEX Mini Viewfinder MVF LEX Mini labeled MVF-1 (MIR EVF) and single 75cm viewfinder cable with yellow connector for LEX Mini EVF port (K ). K Camera Control Panel CCP-1 LEX Mini The Camera Control Panel CCP-1 is a small control panel that connects to the viewfinder port of LEX Mini or MIR. It can be used as a control device when no optical viewfinder is required and framing is done via an onboard monitor. It can also be daisy-chained between the MVF-1 viewfinder and the camera to provide a right-hand side control interface, allowing camera controls to be accessed while the operator is framing through the optical viewfinder. K x Camera Control Panel CCP-1 K x L-Bracket K x Cable LEX Mini to CCP-1 0,5m/19in K x Cable LEX Mini to CCP-1 0,75m/29in K x Cable LEX Mini to CCP-1 1,5m/59 in Note: This set only contains cables to connect LEX Mini to CCP-1. We also recomment the LEX Mini or CCP-1 to MVF-1 cable set (K ) for options daisy chaining MVF-1 from CCP-1. K Heated Eyecup HE gr 90x65x66 mm heated eyecup compatible with the MIR MVF-1 (starting with serial number 2151) LEX Mini MVF-1 and the LEX EVF-1 eyepieces. Designed to reduce fogging or freezing in very humid and/or cold environments. K x Heated Eyecup HE-7 K x Heated Eyecup Cable KC-42 Not compatible with MIR MVF-1 (serial number 2150 or lower) or film camera eyepieces. Page 12

16 Monitors Monitors HD monitors for the use with artemis systems, TRINITY and MXIM 0100 Monitors K Transvideo StarliteHD5-RRI OLED Monitor gr 70x145x25 mm 5 OLED Monitor with touch functionality and integrated H.264 recorder (RRI bus Interface / 3G / HD-SDI input + reclocked output / 5-44v DC power input through Lemo 0B 5pin 5.7 inch x 2.5 inch x 0.9 inch / 0.4lbs). The monitor will support camera control via to Note: This is a special version of the StarliteHD5 monitor which provides extra communication pins on the power connector to control the camera via the touch interface. Regular StarliteHD5 monitors will not be able to provide touch control to the camera. In order to use the Starlite HD5-RRI with MIR a straight power/communications cable is needed (K ). Please find further cabels in the cable section. Licenses 0100 Licenses LEX Mini RRI Look Library License Key 290 The RRI Look Library is a comprehensive set of predefined looks for RRI cameras with advanced look management. It provides a set of high quality looks and offers a basic repertoire of color responses like film stocks and filters did for film cameras. The RRI Look Library offers 87 looks in 3 intensities. The library uses a numbering scheme to identify looks and covers common themes like film emulations, beauty, tinted looks and more. The RRI Look library requires SUP 5 and is a default option for every LEX Mini or MIR Premium. Separate licenses are only needed for LEX Mini cameras being sold based prior May 1st LEX Mini 4:3 License Key The LEX Mini 4:3 License Key enables 3 ProRes recording modes which access the full 4:3 sensor area and support the use of 2x anamorphic lenses. The recording modes are: - 4:3 2.8K - 2:39:1 2K na. - HD na. In combination with the LEX Mini RRIRW License Key the LEX Mini 4:3 License Key will also enable MXF/RRIRW recording in Open Gate. Note: This License Key requires camera software update (SUP) 4.0 or greater. Please refer to the LEX Mini manual and SUP release notes for more detail LEX Mini RRIRW License Key The RRIRW License Key for LEX Mini enables in-camera recording in the 2.8K 16:9 MXF/RRIRW format. In combination with the LEX Mini 4:3 License Key the LEX RRIRW License Key will also enable MXF/RRIRW recording in Open Gate. Note: This License Key requires camera software update (SUP) 4.0 or greater. Please refer to the LEX Mini manual and SUP release notes for more detail. Page 13

17 Licenses, Upgrades and Extended Warranties Extended Warranties 0300 Extended Warranties Extended Warranty for LEX Mini year extended warranty for LEX Mini Page 14

18 Media CFast 2.0 Media, dapters and Docks LEX Mini and MIR support selected CFast 2.0 cards for recording. LEX SXT(W) and LEX XT only support legacy CFast 2.0 cards. Please visit our website for a comprehensive overview of supported media. CFast 2.0 cards can be used to capture ProRes and (LEX Mini only) RRRIRW material. Recorded material can be accessed with the Codex CFast 2.0 card reader or other CFast 2.0 card readers CFast 2.0 Media, dapters and Docks K SanDisk CFast2.0 card 128GB gr 4x43x36 mm Professional grade 128 GB CFast 2.0 memory card by SanDisk. Tested by RRI CFast 2.0 cards have to pass an additional quality inspection before they are shipped. This step provides a basis for extended level customer support and validates that the product is compatible and shipped in working condition. SanDisk Product Code: SDCFSP-128G Rev.D Recording capacity approx. 11min 2.8K RRIRW, 7min 3.4K OG RRIRW, or 30 min 2K 16:9 ProRes 4444 XQ at 24 fps. Note: Only supported by LEX Mini and MIR. K SanDisk CFast2.0 card set 3x128GB Set of 128 GB CFast 2.0 memory cards. Includes: K x SanDisk CFast2.0 card 128GB K SanDisk CFast2.0 card 256GB gr 4x43x36 mm Professional grade 256 GB CFast 2.0 memory card by SanDisk. Tested by RRI CFast 2.0 cards have to pass an additional quality inspection before they are shipped. This step provides a basis for extended level customer support and validates that the product is compatible and shipped in working condition. SanDisk Product Code: SDCFSP-256G Rev.D Recording capacity approx. 24min 2.8K RRIRW, 15min 3.4K OG RRIRW, or 67min 2K 16:9 ProRes 4444 XQ at 24 fps. Note: Only supported by LEX Mini and MIR. K SanDisk CFast2.0 card set 3x256GB Set of 256 GB CFast 2.0 memory cards. Includes: K x SanDisk CFast2.0 card 256GB K SanDisk CFast2.0 card 512GB gr 4x43x36 mm RRI-exclusive, special edition of the professional grade 512 GB CFast 2.0 memory card by SanDisk. This card's firmware has been optimized for best performance in LEX Mini and MIR cameras. Tested by RRI CFast 2.0 cards have to pass an additional quality inspection before they are shipped. This step provides a basis for extended level customer support and validates that the product is compatible and in working condition. Card is available exclusively from RRI. SanDisk Product Code: SDCFSP-512 Version Recording capacity approx. 50min 2.8K RRIRW, 30min 3.4K OG RRIRW, or 114min 2K 16:9 ProRes 4444 XQ at 24 fps. Note: Only supported by LEX Mini and MIR. The retail 512 GB SanDisk Extreme PRO CFast 2.0 memory card is not supported in our cameras. K SanDisk CFast2.0 card set 3x512GB Set of 512 GB CFast 2.0 memory cards. Includes: K x SanDisk CFast2.0 card 512GB Page 15

19 Media K Codex CFast2.0 card reader (USB) gr 88x100x30 mm High quality, professional CFast 2.0 card reader with USB 3.0 interface Codex Product Code: CDX-7515 Note: Recommended for use with an pple computer running OS X or later. USB Media 0500 USB Media K SanDisk USB Stick 20 Spare USB stick for MIR or LEX Mini. llows saving and/or loading look files, user set ups, frame lines, frame grabs and license keys. lso used for installing Software Update Packets (SUPs). Page 16

20 Cables and Power Supplies Viewfinder Cables 0100 Viewfinder Cables K Cable set LEX Mini/CCP-1 to MVF Set of 0,5m, 0,75 and 1,5m cables to connect LEX Mini or CCP-1 to MVF-1 K x Cable LEX Mini to MVF-1 0,5m/19in K x Cable LEX Mini to MVF-1 0,75m/29in K x Cable LEX Mini to MVF-1 1,5m/59in K Cable Set LEX Mini to CCP This set contains all available cables to connect LEX Mini to CCP-1 K x Cable LEX Mini to CCP-1 0,5m/19in K x Cable LEX Mini to CCP-1 0,75m/29in K x Cable LEX Mini to CCP-1 1,5m/59 in K Cable LEX Mini to CCP-1 0,5m/19in 180 0,5m (19 inch) cable to connect LEX Mini to CCP-1. This cable has an LEX Mini EVF connector on both ends and does not work with MIR. K Cable LEX Mini to CCP-1 0,75m/29in 180 0,75m (29 inch) cable to connect LEX Mini to CCP-1. This cable has an LEX Mini EVF connector on both ends and does not work with MIR. K Cable LEX Mini to CCP-1 1,5m/59 in 190 1,5m (59 inch) cable to connect LEX Mini to CCP-1. This cable has an LEX Mini EVF connector on both ends and does not work with MIR. K Cable LEX Mini to MVF-1 0,5m/19in cm (19 inch) cable to connect the MVF-1 viewfinder to LEX Mini, CCP-1 to MVF- 1 or CCP-1 to MIR. This cable has an LEX Mini EVF connector on one end and an MIR EVF connector on the other. K Cable LEX Mini to MVF-1 0,75m/29in cm (29 inch) cable to connect the MVF-1 viewfinder to LEX Mini, CCP-1 to MVF- 1 or CCP-1 to MIR. This cable has an LEX Mini EVF connector on one end and an MIR EVF connector on the other. Note: This cable replaced the previous cable K Please do not use the old cable K RRI Service will swap old cables for ones. K Cable LEX Mini to MVF-1 1,5m/59in 160 1,5m (59 inch) cable to connect the MVF-1 viewfinder to LEX Mini, CCP-1 to MVF- 1 or CCP-1 to MIR. This cable has an LEX Mini EVF connector on one end and an MIR EVF connector on the other. Page 17

21 Cables and Power Supplies Power Supplies and Power Cables For more cables see section 'Media, Cables and other ccessories' below 0200 Power Supplies and Power Cables K MIR Power Cable Straight 2m/6.6in KC Connects the power input of MIR or LEX Mini to a battery power output with an XLR 3 pin connector. K MIR Power Cable Coiled 180 Connects the power input of MIR or LEX Mini to a battery power output with an XLR 3 pin connector. K MIR and LEX Power Supply Light gr 85x210x46 mm Small sized standard 24V power supply (GS22024). Not for outdoor use. Includes an attached cable with 3pin XLR male connector for LEX, LEX Mini and MIR power cables. MIR, LEX or LEX Mini power cables are not included and need to be ordered separately. n C power cable for a Schuko socket is included. For other C socket standards, the cable needs to be taken care of locally. Page 18

22 Cables and Power Supplies Non-ECS Cables 0300 Non-ECS Cables K EXT-RS dapter LEX Mini 130 Short adapter cable that connects to the EXT connector of the LEX Mini and provides a 3-pin RS connector. K LEX Mini udio connector with cable 56 1m udio cable with LEX Mini 5-pin udio connector on one end and open leads at the other. K Cable LEX Mini EXT to EXT 1,5m/59in m (59 inch) cable designed to be used with the LEX Mini EXT Sync feature. Connects LEX Mini Cameras to EDB-2 (K ) or directly to a master LEX Mini camera (for stereo setups). K Cable LEX Mini/MIR EXT to GPB mm cable to connect GPB-1 to MIR or LEX Mini. K Cable StarliteHD5-RRI Ext angled 140 This is the cable that ships with the Starlite HD5-RRI monitor and is provided as a spare or replacement. Note: This cable does not work well with MIR, where it covers the Power input, or when BP-2 is used on the right side of the LEX Mini covering the fans. K Cable StarliteHD5-RRI Ext straight 140 This cable has a straight connector instead of an angled one. This cable works with MIR or with BP-2 mounted to the right hand side of the camera. Page 19

23 Cables and Power Supplies K Cable LEX ETH/RJ45 (3.0m/9.8ft) KC 153-S 124 Connects the ETHERNET socket (Lemo 10 pin) on the LEX Mini, LEX Classic, LEX XT, LEX SXT and LEX LF to any standard RJ-45 Ethernet socket for updates, other service purposes or to remotely control the camera from a computer via the built-in web server (webremote). GPIO/EXT Sync 0210 GPIO/EXT Sync K EXT Distribution Box 2 EDB-2 LEX Mini 490 EDB-2 is a signal distribution box especially designed for the LEX Mini EXT Sync feature. The box connects to an LEX Mini EXT connector and provides 3 EXT outputs to connect LEX Mini cameras or additional EDB-2 boxes. Up to 15 cameras can be connected by chaining up to 7 EDB-2 to a master LEX Mini. Please use the LEX Mini EXT to EXT cable (K ) to connect LEX Mini cameras to EDB-2. K General Purpose IO Box GPB The General Purpose IO Box GPB-1 is a break-out box that works with LEX Mini and MIR. It allows users to build custom button interfaces and electronic controls. The box can be connected to the camera EXT port which it also replicates. It provides protected input channels that can be flexibly mapped to various functions. Possible functions include the activation of the SDI Overlay Menu, replication of the LEX Mini camera buttons, ND filter or EI changes, Record Start/Stop and Stop motion trigger. Includes: GPB-1, 1 x K Cable LEX Mini/MIR EXT to GPB-1, Instruction Manual, 37-pin SUB-D male connector. K x Cable LEX Mini/MIR EXT to GPB-1 Page 20

24 Electronic Control System Wireless Compact Unit WCU-4 The Wireless Compact Unit WCU-4 is a sophisticated, feature-rich and user-friendly 3-axis hand unit for wireless remote lens and camera control. It includes an integrated lens data display and offers extended LEX camera control Wireless Compact Unit WCU-4 K Wireless Compact Unit WCU gr 151x161x90 mm 3-axis wireless hand unit with integrated lens data display. Works with LEX Mini, LEX Plus, LEX Studio, LEX SXT W, LEX LF and LEX 65 cameras and UMC- 4, SMC-1, EMC-1 and MC-1 motor controllers and cforce mini RF. Set includes hand unit, hand strap, lanyard, one plain focus ring (K ) and user manual. Battery and charger need to be ordered separately: K NP-FM500H Battery (Sony) K BC-QM1 Battery Charger (Sony) K WCU-4 Plate 140 Lightweight cheeseplate for WCU-4. Serves as a table stand or can be used to accept a 3/8 spigot for mounting on a C-stand. Can be used to adapt to an on-board monitoring system. K WCU-4 Monitor Bracket 150 Mounts on top of the WCU-4 hand unit and attaches to on-board monitors with 1/4-20 UNC interface. K Pre-Marked Focus Ring 0.20m for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 0.25m for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. Page 21

25 Electronic Control System K Pre-Marked Focus Ring 0.35m for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 0.50m for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 1.00m for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 8in for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 12in for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. Page 22

26 Electronic Control System K Pre-Marked Focus Ring 14in for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 20in for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF. K Pre-Marked Focus Ring 3 6 for WCU gr Enables focus mapping with Wireless Compact Unit WCU-4 and Universal Motor Controller UMC-4, all LEX cameras with Plus module, LEX Mini and cforce mini RF LEX Remote License for WCU Enables the Wireless Compact Unit WCU-4 to change settings on all LEX Plus, LEX Studio, LEX SXT W, LEX LF, LEX 65, LEX Mini and MIR (when used with the Universal Motor Controller UMC-4) cameras. vailable from RRI License Shop: K Carrying Case for WCU-4 and ccessories 400 With compartments for one WCU-4, 10 marking rings, 3 batteries, one charger, three CLM motors, one Universal Motor Controller, one ZMU-3 with pan handle, various gear rings, cables and mounting accessories. Page 23

27 Electronic Control System Single xis Unit SXU-1 The Single xis Unit SXU-1 controls a single lens axis. On set the SXU-1 perfectly complements the 3-axis Wireless Compact Unit WCU-4 as a separate iris control unit, or it can be used on its own, offering a low cost option to productions that do not need multi-axis wireless lens control Single xis Unit SXU-1 K Single xis Unit SXU Single-axis wireless hand unit for iris, focus or zoom control. Works with LEX Mini, LEX Plus, LEX Studio, LEX SXT W, LEX LF and LEX 65 cameras and UMC- 4, SMC-1, EMC-1 and MC-1 motor controllers and cforce mini RF. Set includes hand unit, lanyard, one plain marking ring (K ) and user manual (incl. Standard wooden handgrip; optional Rigger Grip has to be ordered separately). Battery and charger need to be ordered separately: K NP-FM500H Battery (Sony) K BC-QM1 Battery Charger (Sony) K Rigger Grip for SXU Optional handgrip including a metal bar with UNC 3/8 inch 16 treads on two sides that allow mounting the SXU-1 on C-stands and other common on-set rigs. K Carrying Case for SXU-1 and ccessories 290 With compartments for one SXU-1, 5 marking rings, 2 batteries, one charger, one CLM motor, one Mini Motor Controller (e.g. SMC-1), various gears, cables and mounting accessories. Page 24

28 Electronic Control System ccessories for WCU-4 and SXU-1 Hand Units 0500 ccessories for WCU-4 and SXU-1 Hand Units K SONY NP-FM500H Battery gr 40x55x20 mm Powers Wireless Compact Unit WCU-4 and Single xis Unit SXU-1. K SONY BC-QM1 Battery Charger gr 100x150x60 mm Charges NP-FM500H battery. K Cable EXT (7p) - LCS (5p) 160 dapts LEX Mini EXT connector to LCS cables. Page 25

29 Electronic Control System Master Grips The Master Grips combine effective camera stabilization with comprehensive lens and camera control. Lightweight and built to RRI s unsurpassed quality standards, the Master Grips are aimed at LEX, MIR and third-party camera users who want flexible and responsive fingertip control while shooting handheld Master Grips K Master Grip Right Rocker MRR Solid, ergonomic right-side camera handgrip with assignable user buttons and a control rocker for super-smooth zooming. Includes a steel RRI rosette and two LBUS interfaces. K Master Grip Left Wheel MLW Solid, ergonomic left-side camera handgrip with assignable user buttons and a finger wheel for iris or focus adjustments. Includes a steel RRI rosette and two LBUS interfaces. K Master Grip Right Wheel MRW Solid, ergonomic right-side camera handgrip with assignable user buttons and a finger wheel for iris or focus adjustments. Includes a steel RRI rosette and two LBUS interfaces. K Master Grip Left Rocker MLR Solid, ergonomic left-side camera handgrip with assignable user buttons and a control rocker for super-smooth zooming. Includes a steel RRI rosette and two LBUS interfaces. Page 26

30 Electronic Control System K Master Grip Zoom Set LEX Mini KK Pre-configured set with Master Grips and accessories, suitable for controlling zoom lenses on LEX Mini cameras. Includes: K x Master Grip Right Rocker MRR-1 K x Master Grip Left Wheel MLW-1 K x Handgrip Extension 160mm K x Cable Clip 15mm K x Extension Tube for Handgrip K x Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft) K x Cable LBUS (angled) - LBUS (angled) (0.6m/1.9ft) K x Master Grip Case Note: cforce motors, respective LBUS cables and 15mm rods/supporting hardware not included! K Master Grip Prime Set for LEX Mini KK Pre-configured set with Master Grips and accessories, suitable for controlling prime lenses on LEX Mini cameras. Includes: K x Master Grip Right Wheel MRW-1 K x Master Grip Left Wheel MLW-1 K x Handgrip Extension 160mm K x Cable Clip 15mm K x Extension Tube for Handgrip K x Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft) K x Cable LBUS (angled) - LBUS (angled) (0.6m/1.9ft) K x Master Grip Case Note: cforce motors, respective LBUS cables and 15mm rods/supporting hardware not included! KK MLW-1 Basic Set Left LEX Mini Pre-configured set with Master Grip Left Wheel, Standard Grip Right and accessories, suitable for controlling prime lenses on LEX Mini cameras. Includes: K x Standard Grip Right SGR-1 K x Master Grip Left Wheel MLW-1 K x Handgrip Extension 160mm K x Cable Clip 15mm K x Extension Tube for Handgrip K x Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft) K x Master Grip Case Note: cforce motors, respective LBUS cables and 15mm rods/supporting hardware not included Page 27

31 Electronic Control System Mini Motor Controllers 0800 Mini Motor Controllers K ctive Motor Controller MC gr 126x83x29 mm Compact motor controller with an LBUS interface connecting to up to three daisychained cforce motors. Works with WCU-4, SXU-1, Master Grips and pan-bar zoom (cmotion). ctive Lens Motor cforce mini The cforce mini is an exceptionally small and lightweight, yet fast and responsive lens motor. Equipped with twin connectors and using daisy chain technology, up to three cforce motors can be chain-linked from a single connector on the LEX Mini camera, the ctive Motor Controller MC-1, the Universal Motor Controller UMC-4 or the cforce mini RF ctive Lens Motor cforce mini K cforce mini Basic Set Includes: K x cforce mini Motor Unit K x CLM-5/cforce mini Clamp Console 19/15mm K x CLM-5/cforce mini Gear m0.8/32p, 40t LBUS motor cables need to be ordered separately. K cforce mini Motor Unit cforce mini motor unit without gears, cable and bracket. Page 28

32 Electronic Control System ctive Lens Motor cforce plus The cforce plus motor moves any standard lens in a very fast, smooth and pleasant manner. Equipped with twin connectors and using daisy chain technology, up to three cforce motors can be chain-linked from a single connector on the LEX Mini camera, the ctive Motor Controller MC-1, the Universal Motor Controller UMC-4 or the cforce mini RF ctive Lens Motor cforce plus K cforce plus Basic Set KK K x cforce plus Motor Unit K x cforce plus Clamp Console 19/15mm K x cforce plus Gear m0.8/32p, 60t Note: LBUS motor cables need to be ordered separately. K cforce plus Motor Unit cforce plus motor unit without gears, cable and bracket. K cforce plus Clamp Console 19/15mm 160 K x CLM-5/cforce mini Clamp Insert 19/15mm K cforce plus Gear m0.8/32p, 60t 110 Page 29

33 Electronic Control System ccessories for CLM-5 and cforce mini Motors 1430 ccessories for CLM-5 and cforce mini Motors K CLM-5/cforce mini Clamp Console 19/15mm 140 Compatible with CLM-5, cforce mini and cforce mini RF. Includes: K x CLM-5/cforce mini Clamp Insert 19/15mm K CLM-5/cforce mini Clamp Insert 19/15mm 21 For 15 mm rods. Compatible with CLM-5, cforce mini and cforce mini RF clamp consoles. K CLM-5/cforce mini Gear m0.8/32p, 40t 85 For RRI/Zeiss focus/iris/zoom, Panavision focus, Fujifilm PL focus/iris/zoom. Compatible with CLM-5, cforce mini and cforce mini RF. K CLM-5/cforce mini Gear m0.8, 40t, 25mm mm wide gear for moving lens barrels. Compatible with CLM-5, cforce mini and cforce mini RF. K CLM-5/cforce mini Gear m0.4/64p, 80t 110 For Panavision iris, Fujinon ENG iris, Canon ENG iris. Compatible with CLM-5, cforce mini and cforce mini RF. K CLM-5/cforce mini Gear m0.5, 64t 110 For Canon ENG focus/zoom. Compatible with CLM-5, cforce mini and cforce mini RF. Page 30

34 Electronic Control System K CLM-5/cforce mini Gear m0.6, 56t 110 For Fujinon ENG focus/zoom. Compatible with CLM-5, cforce mini and cforce mini RF. K CLM-5/cforce mini Gear 48p, 60t 180 For Panavision zoom. Compatible with CLM-5, cforce mini and cforce mini RF. LCUBE converters LCUBEs are miniature converter boxes converting the LBUS protocol to other protocols LCUBE converters K LCUBE CUB-1 Basic Set 780 KK Miniature converter box converting the LBUS protocol to serial protocols and vice versa. dapts Ultrasonic Distance Measure UDM-1 to LEX Mini camera (for UDM- 1 readout on WCU-4 handset). Provides two LBUS connectors (4 pin) and one SERIL connector (7 pin). The LCUBE has an integrated dovetail for mounting the LCUBE Bracket (K ) or the CLM-5/cforce mini Clamp Console 19/15 mm (K ). K x LCUBE CUB-1 K x LCUBE Bracket Note: LBUS cables need to be ordered separately. Page 31

35 Electronic Control System LBUS Cables LBUS cables connect LBUS compatible devices (such as cforce mini motors) with one another, providing control signals and power. The D-Tap, XLR and RS cables are used to power an LBUS system from an external power source LBUS Cables K Cable LBUS - LBUS (0.2m/8in) 150 LBUS cable (Le 4p, Le 4p). Length: 0.2m/8 inch. K Cable LBUS - LBUS (0.3m/1ft) 150 LBUS cable (Le 4p, Le 4p). Length: 0.3m/1ft. K Cable LBUS - LBUS (0.5m/1.5ft) 150 LBUS cable (Le 4p, Le 4p). Length: 0.5m/1.5ft. K Cable LBUS - LBUS (0.8m/2.6ft) 150 LBUS cable (Le 4p, Le 4p). Length: 0.8m/2.6ft. K Cable LBUS - LBUS (1.5m/5ft) 150 LBUS cable (Le 4p, Le 4p). Length: 1.5m/5ft. K Cable LBUS - LBUS (3m/10ft) 160 LBUS cable (Le 4p, Le 4p). Length: 3m/10ft. K Cable LBUS - LBUS (6m/20ft) 180 LBUS cable (Le 4p, Le 4p). Length: 6m/20ft. Page 32

36 Electronic Control System K Cable LBUS - LBUS (15m/49ft) 200 LBUS cable (Le 4p, Le 4p). Length: 15m/49ft. K Cable LBUS - D-Tap (1.2m/4ft) 180 LBUS power cable to D-Tap (Le 4p, nton Bauer 2p). Length: 1.2m/4ft. K Cable LBUS - D-Tap (0.8m/2.6ft) 180 LBUS power cable to D-Tap (Le 4p, nton Bauer 2p). Length: 0.8m/2.6ft. K Cable LBUS - RS (0.8m/2.6ft) 170 LBUS power cable to Fischer 3 pin (Le f4p, Fi m3p). Length: 0.8m/2.6ft. K Cable LBUS - XLR (4p) (0.8m/2.6ft) 180 LBUS power cable to XLR 4 pin (Le 4p, XLR 4p). Length: 0.8m/2.6ft. K Cable LBUS (angled) - EXT (6p) (straight) (0.8m/2.6ft) 190 Connects MIR and LEX Mini EXT to LBUS devices (e.g. Master Grips). Includes one angled LBUS connector. Length: 0.8m/2.6ft K Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft) 190 Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.35m/1.1ft Page 33

37 Electronic Control System K Cable LBUS (angled) - LBUS (straight) (0.8m/2.3ft) 195 Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.80m/2.6ft K Cable LBUS (angled) - LBUS (straight) (1m/3.3ft) 200 Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 1m/3.3ft K Cable LBUS (angled) - LBUS (angled) (0.2m/8in) 210 Connects LBUS devices (e.g. cforce motors). Includes two angled LBUS connectors. Length: 0.2m/8 K Cable LBUS (angled) - LBUS (angled) (0.6m/1.9ft) 210 Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.6m/2ft K Cable LBUS (angled) - LBUS (angled) (0.8m/2.6ft) 210 Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.8m/2.6ft Page 34

38 Electronic Control System Ultrasonic Distance Measure UDM-1 The Ultrasonic Distance Measure UDM-1 is a small and lightweight distance measuring device that works with any camera Ultrasonic Distance Measure UDM-1 K Ultrasonic Distance Measure UDM-1 Basic Set KK K x UDM Sensor Unit K x UDM Display Unit K x Cable UDM Display (4p) - UDM Sensor (4p) Proposed mounting option (not included): K Universal Mounting rm UM-120 Power cable has to be ordered separately. K Cable UDM - SERIL (7p) (1.5m/5ft) gr 230x155x15 mm Connects UDM-1 to Universal Motor Controllers and LCUBE CUB-1. Length: 1.5m/5ft. Page 35

39 Electronic Control System ECS Camera Sets 1900 ECS Camera Sets K cforce Set for LEX Mini, Metric Scale K x Wireless Compact Unit WCU-4 K x Pre-Marked Focus Ring 0.20m for WCU-4 K x Pre-Marked Focus Ring 0.25m for WCU-4 K x Pre-Marked Focus Ring 0.35m for WCU-4 K x Pre-Marked Focus Ring 0.50m for WCU-4 K x Pre-Marked Focus Ring 1.00m for WCU-4 K x Plain White Focus Ring for WCU-4, SXU-1 K x WCU-4 Plate K x WCU-4 Monitor Bracket K x SONY NP-FM500H Battery K x SONY BC-QM1 Battery Charger K x cforce mini Basic Set K x Cable LBUS - LBUS (0.3m/1ft) K x Carrying Case for WCU-4 and ccessories K cforce Set for LEX Mini, Imperial Scale K x Wireless Compact Unit WCU-4 K x Pre-Marked Focus Ring 8in for WCU-4 K x Pre-Marked Focus Ring 12in for WCU-4 K x Pre-Marked Focus Ring 14in for WCU-4 K x Pre-Marked Focus Ring 20in for WCU-4 K x Pre-Marked Focus Ring 3 6 for WCU-4 K x Plain White Focus Ring for WCU-4, SXU-1 K x WCU-4 Plate K x WCU-4 Monitor Bracket K x SONY NP-FM500H Battery K x SONY BC-QM1 Battery Charger K x cforce mini Basic Set K x Cable LBUS - LBUS (0.3m/1ft) K x Carrying Case for WCU-4 and ccessories Page 36

40 Support Systems LEX Mini Camera Specific Support Systems 0200 LEX Mini Camera Specific Support Systems K Mini dapter Plate MP gr 50x110x20 mm Lightweight adapter plate offering 3/8 inch and ¼ centered threads, as well as interfaces for the LEX Mini side bracket MSB-1 and Rod Mounting Bracket RMB-3. K Mini dapter Plate MP gr 120x120x30 mm Base plate for 15 mm lightweight support. Fits to the top and bottom of the LEX Mini. The MP-2 is compatible with studio bridge plates via the Bridge Plate dapter BP-4. K Bridge Plate dapter BP gr 70x120x20 mm This spacer allows standard bridge plates to be mounted to the LEX Mini dapter Plate MP-2. The BP-4 also features centered 3/8 inch and 1/4 inch threads for standard tripod plates. K Mini Viewfinder Bracket MVB gr 150x160x60 mm llows the MVF-1 viewfinder to attach to LEX Mini via 15mm LWS rods and viewfinder mount. Requires the Mini dapter Plate MP-2 or other 15mm rod support. K Compact Bridge Plate CBP-1 19mm The CBP-1 is a baseplate compatible with the LEX Mini. The CBP-1 features an integrated shoulder pad. It offers the advantage of a sliding studio bridge plate without the added weight. The quick-release system allows the camera to be pulled or attached directly to the balance plate without having to slide the assembly out. Page 37

41 Support Systems K Mini Side Bracket MSB-1 for LEX Mini gr 40x160x30 mm Side brackets featuring sturdy rosettes as well as 3/8 inch and 1/4 inch industry - standard threads for the mounting of handles and accessories. K Broadcast Plate for LEX Mini gr 140x250x90 mm The broadcast plate for LEX Mini is an adjustable baseplate for documentarystyle filming. The broadcast plate features an advanced shoulder pad adjustment that permits precise balancing on the shoulder without disturbing the set up mounted on accessory rods. The compatibility with VCT-style tripod adapters such as the RRI QRP-1 allows swift transition from shoulder to tripod. Please note the broadcast plate for LEX Mini supports 15mm LWS rods. Studio set-ups, as offered by the RRI bridge plates BP-8 and BP-9, are not compatible with the broadcast plate for LEX Mini. K Mini Side Bracket MSB-2 for LEX Mini gr The Mini Side Bracket MSB-2 offers support for lens motor in configurations that require lightweight baseplates with no rod support, such as lightweight stabilizer systems or drones. K Rod Mounting Bracket RMB gr 30x40x40 mm The RMB-3 supports a single 19 mm rod (15 mm rod via reduction insert K ) and is well suited to accessories such as lens motors or lightweight viewfinder mounts. K Side ccessory Bracket SB gr 160x130x30 mm The Side ccessory Bracket fits to the Mini dapter plates MP-1 and MP-2, as well as the Broadcast Plate for LEX Mini and Compact Bridge Plate CBP-1. The SB-1 provides standard RRI 3/8 and ¼ accessories interfaces, as well as attachment points for the Rod Mounting Bracket RMB-3 and Mini Side Brackets MSB-1. Page 38

42 Support Systems K Side ccessory Bracket Set for LEX Mini 290 KK gr 160x130x40 mm The SB-1 allows users to position accessories towards the rear of the LEX Mini in order to optimize balance and bulk. The RMB-3 used in combination to the SB-1 permits the use of standard camera rods to which camera accessories can be clamped. K x Side ccessory Bracket SB-1 K x Rod Mounting Bracket RMB-3 K x 15mm Reduction Insert K Low Bracket for CSP gr 70x110x40 mm This bracket is designed to optimise handheld camera operating when using a compact baseplate such as the LEX Mini dapter Plate MP-2. For use with bridge plate adapter BP-4 and most standard 15 mm LWS baseplates for third party cameras, the original CSP-1 rod bracket is required. K Rear ccessory Bracket RB-1 for LEX Mini 250 The Rear ccessory Bracket RB-1 offers flexible attachment options for accessories such as modern battery solutions. This product is not available yet. Start of order intake and first customer shipment date will be announced in an Official Sales Information. K RB-1 Clamp 190 llows battery plates such as the Power Splitting Box or Battery dapter Plate BP-1 to attach to the Rear ccessory Bracket RB-1 This product is not available yet. Start of order intake and first customer shipment date will be announced in an Official Sales Information. Page 39

43 Support Systems K Battery dapter Plate BP-2, LEX Mini gr 160x170x30 mm Side-mounted plate designed for the standard mounting points of IDX and nton Bauer battery adapter plates. This plate provides an ideal placement of the battery for use in compact setups such as handheld camera stabilizers and multi-rotor aircraft. K Single Support Rod 90mm, 3.5in, Ø19mm gr 20x90x20 mm One single support rod (not pair), 90mm long (3.5''), diameter 19 mm, stainless steel, lightweight K Single Support Rod 150mm, 5.9in, Ø19mm gr 20x150x20 mm One single support rod (not pair), 90mm long (3.5''), diameter 19 mm, stainless steel, lightweight K Stabilizer Plate for CBP 250 llows the Compact Bridge Plate to convert into a Stabilizer dapter Mount for LEX Mini (SM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail. Page 40

44 Support Systems Film Style Bridge Plate Sets 1400 Film Style Bridge Plate Sets K Bridge Plate BP-8 Set Short, 19mm Rods gr Compatible with all generations of LEX Studio, as well as LEX with bridge plate adapter BP-1/2. lso compatible with MIR through the use of BP-3 and LEX Mini with the combination of MP-2 and BP-4. Natively compatible with an array of third party cameras such as the Sony F65 and Phantom 4K, and fits many cameras through the use of dedicated RRI PC, such as the Sony F5/F55 and Canon C300 MkII. ccepts 19 mm support rods. K x BP-8 Bridge Plate K x Bottom Plate 300mm/12in K x Support Rods 440mm/17.3in, Ø19mm K Bridge Plate BP-9 Set Short, 15mm Rods Compatible with all generations of LEX Studio, as well as LEX with bridge plate adapter BP-1/2. lso compatible with MIR through the use of BP-3 and LEX Mini with the combination of MP-2 and BP-4. Natively compatible with an array of third party cameras such as the Sony F65 and Phantom 4K, and fits many cameras through the use of dedicated RRI PC, such as the Sony F5/F55 and Canon C300 MkII. ccepts 15 mm support rods. K x BP-9 Bridge Plate K x Bottom Plate 300mm/12in K x Support Rods 440mm/17.3in, Ø15mm Bridge Plate Sled The Bridge Plate Sled BPS-2 is a lightweight alternative to a studio bridge plate when the use of a balance (bottom) plate is required for balance but studio rods are not needed i.e. when using 15 mm LWS rod, or top mounted rods for mounting accessories. Mounting interface is an RRI 35 mm studio bridge plate Bridge Plate Sled K Bridge Plate Sled BPS-2 Set 690 KK Compatible with MBP-3, MBP-1 Pro BP, dapter Plate for Canon C100/300/500, dapter Plate for Sony F5/F55, dapter Plate for Canon 1DX-1DC, dapter Plate for RED Epic/Scarlett. K x Bridge Plate Sled, BPS-2 K x Bottom Plate 300mm/12in Page 41

45 Support Systems Bottom dove-tail plates RRI s bottom dove-tail plates come in three different sizes and additional rod support brackets in order to fit all different settings - cameras with short, medium or long lenses Bottom dove-tail plates K Bottom Plate Set 600mm/24in incl. RSB KK gr K x Bottom Dovetail Plate 600mm/24in K x Rod Support Bracket, RSB-15 K Bottom Plate Set 600mm/24in incl. RSB KK gr K x Bottom Dovetail Plate 600mm/24in K x Rod Support Bracket, RSB-19 K Bottom Plate 300mm/12in gr 100x3000x25 mm Includes multiple ¼-20 and 3/8-16 mounting holes. K Bottom Dovetail Plate 450mm/18in gr 100x4500x25 mm for configuration where balance requires a greater adjustment span. Includes multiple ¼-20 and 3/8-16 mounting holes. K Bottom Dovetail Plate 600mm/24in gr 100x6000x25 mm to be used with adjustable 15 mm or 19 mm studio rod support brackets (RSB-15 or RSB-19), for very long lenses such as the ngenieux / or lura with 2x extender. Includes multiple ¼-20 and 3/8-16 mounting holes. Page 42

46 Support Systems K Rod Support Bracket, RSB gr 20x120x16 mm K Rod Support Bracket, RSB gr 20x130x16 mm Quick Release Baseplate 1650 Quick Release Baseplate K QRP-1-Baseplate gr 80x290x30 mm VCT-style broadcast plate compatible with the RRI MIR camera, some RRI PC support systems as well as many industry standard documentary cameras. Page 43

47 Support Systems Quick Release HD Baseplate QR-HD1 quick-release base plate system that is compatible with all LEX models (except the lexa Studio), MIR and various video cameras. Uses RRI studio support system rods and other components. unique centering adjustment allows a perfectly sturdy fit between the camera and the plate Quick Release HD Baseplate QR-HD1 K Quick Release HD Plate Set 19mm, 340mm Fits to almost all ENG Broadcast Zoom and most of mid-size PL-mounted Zoom Lenses. K x QR-HD Cine Base Plate, Basic Unit K x Broadcast Bridge Plate Sled K x Bottom Plate 300mm/12in K x 19mm Support Rod Holder K x Support Rods 340mm/13.4in, Ø19mm Fits to almost all ENG Broadcast Zoom and most of mid-size PL-mounted Zoom Lenses. K Quick Release HD Plate Set 15mm, 340mm Fits to almost all ENG Broadcast Zoom and most of mid-size PL-mounted Zoom Lenses. K x QR-HD Cine Base Plate, Basic Unit K x Broadcast Bridge Plate Sled K x Bottom Plate 300mm/12in K x 15mm Support Rod Holder K x Support Rods 340mm, Ø15mm Fits to almost all ENG Broadcast Zoom and most of mid-size PL-mounted Zoom Lenses. K QR-HD Cine Base Plate, Basic Unit gr 95x355x85 mm With adjustable clamping mechanism. Compatible with Sony V-Lock cameras. K Broadcast Bridge Plate Sled gr 130x150x30 mm Does not include Support Rod Holder or Bottom Dovetail Plate. Page 44

48 Support Systems K mm Support Rod Holder gr 155x40x35 mm With adjustable rod centering for all common digital cameras. K mm Support Rod Holder gr 45x145x25 mm With adjustable rod centering for all common digital cameras. Page 45

49 Support Systems Lens Support RRI s lens supports are offering compatibiklity with all three support standards - 15mm lightweight, 15mm Studio and 19mm Studio Lens Support K Lens Support LS-9 for 19mm, black gr 100x150x30 mm The RRI Lens Support LS-9 is an adjustable and lockable bridge that clips to 19 mm rods. The lens is secured via a 3/8-16 inch thumbscrew. K Lens Support LS-10 for 15mm, black gr 30x150x20 mm The RRI Lens Support LS-10 is an adjustable and lockable bridge that clips to 15 mm rods. The lens is secured via a 3/8-16 inch thumbscrew. K LS-11 Zip Gear Set 510 KK K x LS-11 Lightweight Lens Support K x Zip Gear K LS-11 Lightweight Lens Support gr For rods Ø 15 mm LWS to mount photo or CP2 for additional support Requires one of the following (not included): K Zip Gear (complete) K Lens Support Pin LSP-1 K Lens Support Pin LSP-2 K Lens Support Pin LSP gr 5x45x5 mm Pin supports lenses with LS-11 for stable attachment (with ¼ 20 thread plus 2x 1/4 inch to 3/8 inch adapter included) Page 46

50 Support Systems K Lens Support Pin LSP gr 8x38x8 mm Pin Supports lenses with LS-11 for stable attachment (with 3/8 inch thread) Top Handle Support RRI s top handles are a sturdy and reliable way to carry the cameras Top Handle Support K Cage Top Handle, CTH gr 70x155x30 mm The Cage Top Handle CTH-1 is designed to fit on any single 3/8-16 inch interface found on the RRI Cage System. Like the lexa handle, the CTH-1 offers numerous mounting points in the industry standard 3/8-16 and 1/4-20 inch thread sizes. The Handle is seamlessly. K Center Camera Handle CCH gr 100x150x65 mm Compatible with all generations LEX M, LEX Mini, MIR through the use of adapter plate UP-2 and many third party cameras equipped with RRI PC. Page 47

51 Support Systems Handgrips and Shoulder Support 2100 Handgrips and Shoulder Support K Standard Grip Left SGL Lightweight and durable ergonomic handgrip without electronic components. It perfectly complements the K Master Grip Right Rocker MRR-1. With its RRI rosette it can be attached to the K Handgrip Extension, rod bridge supports such as UBS-2 and LBS-2, or directly to the camera native rosette mounts. K Standard Grip Right SGR Lightweight and durable ergonomic handgrip without electronic components. It perfectly complements the K Master Grip Left Wheel MLW-1. With its RRI rosette it can be attached to the K Handgrip Extension, rod bridge supports such as UBS-2 and LBS-2, or directly to the camera native rosette mounts. K LBS-2 Handgrip Set 970 KK This handgrip configuration can be used with any camera, fitting to 15 mm lightweight support rods. K x Handgrip without on/off switch K x Handgrip Extension, long K x Lightweight Bridge Support LBS-2 K LBS-2 Handgrip Set on/off RS-3pin KK Lightweight and durable handgrip set based on RRI rosettes. Can be attached to 15mm LWS rods.triggers run functionality on cameras fitted with 3-pin RS run signals, such as LEX, MIR and many third party cameras. K x Handgrip without on/off switch K x Handgrip with on/off switch RS-3 pin K x Handgrip Extension, long K x Lightweight Bridge Support LBS-2 For LEX Mini Set up additionally required: K x EXT-RS dapter Page 48

52 Support Systems K UBS-2 Handgriff Set KK This handgrip configuration can be used with any camera, fitting to 15 or 19 mm studio rods or 15 mm lightweight support rods. Includes: K x Handgrip without on/off switch K x Handgrip Extension, long K x Universal Bridge Support UBS-3 K UBS-2 Handgrip Set on/off RS-3pin KK Can be attached to 15mm LWS rods as well as 15mm and 19mm studio rod systems. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as LEX, MIR and many third party cameras. Lightweight and durable handgrip set based on RRI rosettes. K x Handgrip without on/off switch K x Handgrip with on/off switch RS-3 pin K x Handgrip Extension, long K x Universal Bridge Support UBS-3 K Pair of Handgrips gr 134x540x127 mm Extremely durable and ergonomically formed articulating handgrip for right camera side that attaches to the rosette of any RRI camera. Includes REC button and short built-in cable to RS connector (Fischer 3 pin) and for left camera side without connector. K rticulating Handgrip Right K rticulating Handgrip Left K Handgrip without on/off switch gr 40x160x40 mm only for mechanical use - without RS cable Page 49

53 Support Systems K Handgrip with on/off switch RS-3 pin gr 70x165x40 mm with RS 3-Pin connector; cables with other connectors available K Handgrip Set right 970 KK Lightweight and durable ergonomic handgrip based on RRI rosettes. Can be attached to rod bridge supports such as UBS-2 and LBS-2 or directly to the camera native rosette mounts. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as LEX Mini, LEX, MIR and many third party cameras. K x Standard righthand articulating Handgrip K x Handgrip Extension, long For LEX Mini Set up additionally required: K x Side bracket for LEX Mini (MSB-1) K x EXT-RS dapter K Handgrip Set KK Heavy duty handgrip set. The handles offset is adjustable. Can be attached via short extensions and rosette offset brackets directly to the camera native rosette mounts. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as LEX Mini, LEX, MIR and many third party cameras. K x Pair of Handgrips K x Extension Tube for Handgrip K x Handgrip Extension, short For LEX Mini Set up additionally required: K x Side bracket for LEX Mini (MSB-1) K x EXT-RS dapter K Standard righthand articulating Handgrip gr 150x200x80 mm Page 50

54 Support Systems K Handgrip Extension, long gr 40x185x40 mm To extend handgrip parallel to camera body. (measurement from end to end: 195 mm) K Handgrip Extension, short gr 110x110x30 mm n extension that attaches between the camera body and the handgrip to move the handgrip further away (forward) from the camera body. (measurement from end to end: 100 mm) K Handgrip Pan Bar Clamp Universal gr 13x7x4 mm Pivotable clamp arm that links Master Grips to fluid head pan handles up to 32mm tube diameter. K Handgrip Pan Bar dapter 18mm 360 Pivotable clamp arm to attach Master Grips to fluid head pan handles with 18mm tube diameter. K Handgrip Pan Bar dapter 20mm 350 Pivotable clamp arm to attach Master Grips to fluid head pan handles with 20mm tube diameter. K Extension Tube for Handgrip gr 30x60x30 mm short aluminum rod that attaches between camera body and handgrip to move the handgrip further away (left or right) from the camera body. Page 51

55 Support Systems K Lightweight Bridge Support LBS gr 40x160x40 mm RRI inchs Lightweight Bridge support LBS-2 comes with hard-mounted rosettes, offering support for handheld set. K Universal Bridge Support UBS gr 50x200x40 mm RRI s Universal Bridge Support UBS-3 offers compatibility with 19 mm studio, 15 mm studio and 15 mm lightweight rods and comes with hard-mounted rosettes with a total weight of only 240g. K Shoulder Set S-4 for BP-8, BP gr 350x390x120 mm The handgrip set S-4 can be attached directly to the bottom of most classic RRI cameras, the LEX via the bridge plate adapter BP-1/2 and also the MIR via its baseplate BP-3. The S-4 can also be swiftly mounted to the bottom of all RRI bridge plates such as BP-8/9 and BP-12/13, for quick transition from tripod to shoulder. K Shoulder Pad CSP gr 140x170x90 mm This shoulder pad clamps on 15 mm LWS rods forward or backwards of the baseplate and can be adjusted to suit best balance on the shoulder. The camera rig is able to rest on a flat surface without its shoulder pad coming in contact to the ground. Page 52

56 Support Systems Recorder/Battery Bracket Solutions for mounting hardware such as external recorders and batteries on RRI and third-party cameras Recorder/Battery Bracket K Battery dapter Plate BP gr 120x180x30 mm The battery plate allows industry standard battery mounts such as V-mount and Gold Mount to fit to 15mm LWS rods. The battery plate can be offset in order to clear rear card slots or optimise balance. K Recorder Battery Hinge, RBH gr 40x96x32 mm The strong hinge locks via a rosette and mounts through a standard 3/8-16 inch interface with removable anti-rotation pins. The RRI Rosette Based Hinge is not limited to the Recorder and Battery Bracket, and can be used for other purposes. Page 53

57 Support Systems Support Rods Ø 15 mm The lightweight stainless steel rods are built using the same high quality materials as traditional rods with a wall thickness optimized for weight. vailable in sizes up to 340mm in length, the lightweight stainless steel rods still offer the same strength, unrivalled glide and clamping quality as the traditional stainless steel rods while being up to 50% lighter in weight. The longer 440mm and 540mm rod sizes, designed to support heavy set-ups, retain the traditional wall thickness Support Rods Ø 15 mm K Support Rods 140mm, 5.5in, Ø15mm gr 30x145x15 mm One pair Ø 15 mm, stainless steel, lightweight K Support Rods 240mm/9.4in, Ø15mm gr 40x250x20 mm One pair Ø 15 mm, stainless steel, lightweight K Support Rods 340mm, Ø15mm gr 30x340x15 mm One pair Ø 15 mm, stainless steel, lightweight K Support Rods 440mm/17.3in, Ø15mm x440x15 mm One pair Ø 15 mm, stainless steel. K Support Rods 540mm/21.3in, Ø15mm x540x15 mm One pair Ø 15 mm, stainless steel. Page 54

58 Support Systems Support Rods Ø 19 mm The lightweight stainless steel rods are built using the same high quality materials as traditional rods with a wall thickness optimised for weight. vailable in sizes up to 340mm in length, the lightweight stainless steel rods still offer the same strength, unrivalled glide and clamping quality as the traditional stainless steel rods while being up to 50% lighter in weight. The longer 440mm and 540mm rod sizes, designed to support heavy set-ups, retain the traditional wall thickness Support Rods Ø 19 mm K Support Rods 240mm/9.4in, Ø19mm gr One pair Ø 19 mm, stainless steel, lightweight K Support Rods 340mm/13.4in, Ø19mm gr 38x340x19 mm One pair Ø 19 mm, stainless steel, lightweight K Support Rods 440mm/17.3in, Ø19mm x440x19 mm One pair Ø 19 mm, stainless steel. K Support Rods 540mm/21.3in, Ø19mm x540x19 mm One pair Ø 19 mm, stainless steel. Page 55

59 Support Systems Mounting Hardware In the chapter mounting hardware a lot of adapters, extensions and other useful bracketry is listed Mounting Hardware K Shoulder Belt dapters gr Offers compatibility with standard ENG shoulder belts. K Rod Mounting Bracket RMB-2 Set 180 KK The Rod Mounting Bracket RMB-2 can be attached to any RRI 3/8-16 inch interface and holds a standard 19 mm rod (15 mm rod with a reduction insert). K x Rod Mounting Bracket RMB-2 K x 15mm Reduction Insert K Basic Set 15mm Reduction Insert 130 KK The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. K x 15mm Reduction Insert K Pro Set 15mm Reduction Insert 230 KK The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. K x 15mm Reduction Insert The 15 mm reducing insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. K mm Reduction Insert 27 The 15 mm reducing insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. Page 56

60 Support Systems K Microphone Bracket Holder MBH x66x22 mm The Microphone Holder Bracket provides offset support for any standard microphone bracket fitted with a 3/8 inch thread. The Microphone Bracket Holder can be attached to any RRI 3/8 inch accessory interface, such as handles, cage arms and top plates. K Handle Extension Block, HEB gr 30x40x20 mm ttaches to the Center Camera Handle (CCH-1) or any 3/8 inch-16 UNC threaded mounting point. Includes 3x 3/8 inch-16 UNC threaded mounting points. K Handle Extension Block long, HEB gr 30x118x20 mm ttaches to the LEX Center Camera Handle (CCH-1) or any 3/8 inch-16 UNC threaded mounting point. Includes 3x 3/8 inch-16 UNC threaded mounting points. K dapter UMC 3/8in gr 40x90x20 mm 26mm dovetail insert. Both sides attach to 3/8-16 UNC thread mounting points having standard RRI Ø 15,5mm counterbore for attaching and quickly removing accessories from a camera (compatible with all UMC versions). K x Dovetail Insert 3/8in thread K x Dovetail Shoe 3/8in thread K Dovetail Insert 3/8in thread gr 40x95x15 mm ll purpose 26mm dovetail insert. Can be attached to 3/8 inch thread mounting points having standard RRI Ø 15,5mm counterbore. For use with 26mm dovetail shoes. Page 57

61 Support Systems K Dovetail Shoe 3/8in thread gr 35x45x10 mm ll purpose 26mm dovetail shoe. Can be attached to 3/8 inch thread mounting points having standard RRI Ø15,5mm counterbore. For use with 26mm dovetail inserts. K /8in ccessory dapter, 18, 65mm square gr ttaches via 3/8 inch UNC thread with two locating pins for stability. For use with RRI 18,65mm shoe-mounted accessories. K Universal Mounting rm UM gr 135x205x70 mm rticulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 120 mm / 4.7 inch long, with two swivel ball joints and one elbow joint. Has combination fastener system for use with plain. Dimensions: 5.3 inch x 8 inch x 0.9 inch/ 0.7 lbs K Universal Mounting rm, UM gr 60x195x36 mm rticulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 240mm / 9.4 inch long, with two swivel ball joints and one elbow joint. Has combination fastener system for use with plain 3/8-1. KK ccessory Rail Small Set gr 40x40x40 mm The ccessory Rail Small Set combines both the ccessory Rail Small RS-1 and the ccessory Rail Bracket RB-1. It is a simple, quick and reliable way to attach and detach accessories. When using a UDM-1 or a Cinetape on a Matte Box with the SMB or the LMB ccessory dapter, the sensor unit mounted on the RB-1 can easily be switched from the Matte Box to the camera, and vice versa. Includes: K x ccessory Rail Small RS-1 K x ccessory Rail Bracket RB-1 Page 58

62 Support Systems K ccessory Rail Bracket RB gr 40x40x30 mm The ccessory Rail Bracket RB-1 can be used on the SMB and LMB ccessory dapter as well as on the ccessory Rail Small. It can be locked off by turning the lever 90. ccessories - such as an articulating arm or a Cinetape - can be mounted on top of the integrated 3/8-16 interface, which offers four different holes for securing pins. The RB-1 is part of the existing SMB and LMB ccessory dapter. K ccessory Rail Small RS gr 21x30x10 mm The ccessory Rail Small shares the same rail interface as the SMB and the LMB ccessory dapter. Two ball-pressure pieces on each side of the rail prevent an attached ccessory Rail Bracket RB-1 from slipping off. It is compatible with all 3/8-16 interfaces which offer holes for the two securing pins. Uniquely, four different sizes of hex key can be used with the ccessory Rail Small without having to adjust it - 3,4, 5 and 5/32 will all fit. Length: 30mm/1.18 Electronic Viewfinder Brackets and Sets RRI is offering viewfinder and monitor brackets to work with RRI and third party cameras and viewfinders from other manufacturers Electronic Viewfinder Brackets and Sets K Viewfinder Cross Pipe RMB-3 Set 370 KK K x Viewfinder Cross Pipe K x Rod Mounting Bracket RMB-3 K Viewfinder Cross Pipe gr 120x160x60 mm The RRI Viewfinder Cross Pipe can be used in combination with the Viewfinder Mounting Bracket MVB-1 to attach RRI or third party viewfinders in combination with the EVF brackets from RRI PC. Page 59

63 Follow Focus Systems Mini Follow Focus MFF-2 for 15 mm Lightweight Support - designed with lighter cameras in mind and compatible with all available RRI lens gears and focus knobs. Cine has a gear ratio of 2:1 for cine style lenses, which means one turn of the focus knob will result in two turns of the focus gear. This gear ratio is common to all classic follow focus units from RRI (FF-3, FF-4, etc.) and is traditionally suited to cine lenses such as Ultra Primes, Compact Primes, lura Zooms, ngenieux Zooms, etc HD has a slower gear ratio of 1:1 for 2/3 broadcast and still photo lenses In this case, one turn of the focus knob will result in a single turn of the focus gear. This particular gear ratio might be preferred when using lenses with a short focus throw, where the scale from minimal focus to infinity is so short that a traditional 2:1 ratio could be too direct, lacking in precision. Typical lenses suited to the HD ratio are modern still prime lenses, some ENG zooms, extreme wide-angle lenses or some older designs. For Marking Disks please see chapter Marking Disks for Follow Focus 0100 Mini Follow Focus MFF-2 K MFF-2 Cine Standard Set KK K x Mini Follow Focus MFF-2 Cine base K x Standard Focus Knob, left K x 43tooth, 0.8 Metric Module Gear K MFF-2 Cine Hard Stop Set KK K x Mini Follow Focus MFF-2 Cine base K x Hard Stop Focus Knob universal K x 43tooth, 0.8 Metric Module Gear K MFF-2 Cine Standard/Hard Stop Set KK K x Mini Follow Focus MFF-2 Cine base K x Standard Focus Knob, left K x Hard Stop Focus Knob universal K x 43tooth, 0.8 Metric Module Gear Page 60

64 Follow Focus Systems K MFF-2 HD ENG Standard Set KK K x Mini Follow Focus MFF-2 HD base K x Standard Focus Knob, left K x Gear for ENG Focus and Zoom, Fujinon K x Gear for ENG Focus and Zoom, for Canon For use with Canon/ngenieux/Fujinon ENG/EFP Broadcast lenses when a 1:1 gearbox ratio is preferred. Please note this set is not compatible with cine style lenses (0,8 gearing). K Mini Follow Focus HD SLR Hard Stop Set KK K x Mini Follow Focus MFF-2 HD base K x Hard Stop Focus Knob universal K x 43tooth, 0.8 Metric Module Gear For use with lenses fitted with RRI Zip Gears or native 0.8 gearing. The 1:1 gearbox ratio offers more focus knob travel for stills lenses restricted by a short focus scale. Hard stop capability can be required to enable custom end stops on a lens at the focus puller inchs convenience (as when the lens scale goes past infinity) or to use with modern stills or camcorder lenses that do not have physical end stops. K Mini Follow Focus MFF-2 Cine base gr 85x105x30 mm gear ratio 2:1 to use cine style lenses K Mini Follow Focus MFF-2 HD base gr 90x115x35 mm gear ratio 1:1 to use ENG style or still photo lenses Page 61

65 Follow Focus Systems Studio Follow Focus-4 RRI s Studio Follo Focus FF-4 is a high percise, sturdy and reliable product. It has a gear ratio of 2:1 for cine style lenses, which means one turn of the focus knob will result in two turns of the focus gear. This gear ratio is common to all classic follow focus units from RRI (FF-3, FF-4, etc.) and is traditionally suited to cine lenses such as Signature Primes, Ultra Primes, Master Primes, Compact Primes, lura Zooms, ngenieux Zooms, etc 0300 Studio Follow Focus-4 K Follow Focus FF-4 Set 15mm, black KK K x Follow Focus FF-4, Basic Unit, black K x FF-4-dapter for Bridgeplate Ø15, B-3 K x Follow Focus Gear M0.8 K x Focus Lever Speed Handle/Focus Crank K x Marking Disk, Flat K x Case for FF-3/FF-4/FF-5/accessories K Follow Focus FF-4 Set 19mm, black KK K x Follow Focus FF-4, Basic Unit, black K x FF-4 dapter for 19mm, B-2, black K x Follow Focus Gear M0.8 K x Focus Lever Speed Handle/Focus Crank K x Marking Disk, Flat K x Case for FF-3/FF-4/FF-5/accessories K FF-4 dapter for 19mm, B-2, black gr 100x160x30 mm Snaps on rods from above, for Ø 19 mm support rods (dapter Bridges for FF-3 and FF-4, not for LFF-1 or FF5) K FF-4-dapter for Bridgeplate Ø15, B Snaps on rods from above, for Ø 15 mm support rods (dapter Bridges for FF-3 and FF-4, not for LFF-1 or FF5) Page 62

66 Follow Focus Systems K Follow Focus FF-4, Basic Unit, black gr 100x300x100 mm For use with film or video Lightweight Support systems conforming to RRI standard; includes focus knob left. For use with studio bridge plate, adapter B-2 or B-3 (see below) is required. Page 63

67 Follow Focus Systems Studio Follow Focus-5 Note: additional accessories e.g. Bridgeplate dapters for 19 mm or 15 mm Studio Rod Support have to be ordered separately Cine has a gear ratio of 2:1 for cine style lenses, which means one turn of the focus knob will result in two turns of the focus gear. This gear ratio is common to all classic follow focus units from RRI (FF-3, FF-4, etc.) and is traditionally suited to cine lenses such as Ultra Primes, Compact Primes, lura Zooms, ngenieux Zooms, etc HD has a slower gear ratio of 1:1 for 2/3 broadcast and still photo lenses In this case, one turn of the focus knob will result in a single turn of the focus gear. This particular gear ratio might be preferred when using lenses with a short focus throw, where the scale from minimal focus to infinity is so short that a traditional 2:1 ratio could be too direct, lacking in precision. Typical lenses suited to the HD ratio are modern still prime lenses, some ENG zooms, extreme wide-angle lenses or some older designs. For Marking Disks please see chapter Marking Disks for Follow Focus 0400 Studio Follow Focus-5 K Follow Focus FF-5 Cine Set Basic KK K x Follow Focus FF5-Cine, base K x Standard Focus Knob, left K x Follow Focus Gear M0.8 K x 43tooth, 0.8 Metric Module Gear additional accessories e.g. Bridgeplate dapters for 19 mm or 15 mm have to be ordered separately. For Marking Disks please see chapter inchmarking Disks for Follow Focus inch K Follow Focus FF-5 Cine Set Pro KK K x Follow Focus FF5-Cine, base K x Standard Focus Knob, left K x Follow Focus Gear M0.8 K x 43tooth, 0.8 Metric Module Gear K x Standard Focus Knob, Right K x Focus Lever Speed Handle/Focus Crank K x Flexible Shaft Long, 300mm K x Marking Disk, Flat additional accessories e.g. Bridgeplate dapters for 19 mm or 15 mm have to be ordered separately. For Marking Disks please see chapter inchmarking Disks for Follow Focus inch Page 64

68 Follow Focus Systems K Follow Focus FF-5 HD Set Basic K x Follow Focus FF5-HD, base K x Standard Focus Knob, left K x Gear for ENG Focus and Zoom, for Canon K x Gear for ENG Focus and Zoom, Fujinon additional accessories e.g. Bridgeplate dapters for 19 mm or 15 mm have to be ordered separately For Marking Disks please see chapter - Marking Disks for Follow Focus K Follow Focus FF-5 HD Set Pro K x Follow Focus FF5-HD, base K x Standard Focus Knob, left K x Gear for ENG Focus and Zoom, for Canon K x Gear for ENG Focus and Zoom, Fujinon K x Standard Focus Knob, Right K x Focus Lever Speed Handle/Focus Crank K x Flexible Shaft Long, 300mm K x Marking Disk, Flat additional accessories e.g. Bridgeplate dapters for 19 mm or 15 mm have to be ordered separately For Marking Disks please see chapter - Marking Disks for Follow Focus K Follow Focus FF5-Cine, base gr 130x240x60 mm ratio 2:1 for cine style lenses, knobs not included - please see choices below K Follow Focus FF5-HD, base gr 150x240x40 mm ratio 1:1 for ENG lenses, knobs not included - please see choices below Page 65

69 Follow Focus Systems K dapter FF-5 for 19mm Studio Support gr 45x160x20 mm For mounting FF-5 HD or FF-5 Cine on 19 mm studio support rods. Can be removed / mounted by user in the field. K dapter FF-5 for 15mm Studio Support gr 40x155x20 mm For mounting FF5-HD or Cine on 15 mm studio support rods. Can be removed / mounted by user in the field. Page 66

70 Follow Focus Systems Focus Knobs For Marking Disks please see chapter: Marking Disks for Follow Focus 0500 Focus Knobs K Standard Focus Knob, left gr 150x150x80 mm modified for soft stops with fingers K x Marking Disk, Flat K Standard Focus Knob, Right gr 100x130x100 mm modified for soft stops with fingers K x Marking Disk, Flat K Two-Speed Knob, left gr 125x120x105 mm With planetary reduction transmission. lso useful when using FF-4 with ENG/EFP Lenses or other Lenses with compressed focus scaling. K x Marking Disk, Flat K Two-Speed Knob, Right gr 120x120x110 mm With planetary reduction transmission. lso useful when using FF-4 with ENG/EFP Lenses or other Lenses with compressed focus scaling. K Hard Stop Focus Knob universal gr 100x130x80 mm adjustable hard stops as in the MFF-1 K Marking Disk, Beveled inch Page 67

71 Follow Focus Systems Marking Disks for Follow Focus 0600 Marking Disks for Follow Focus K Marking Disk, Flat, Set 10x 160 KK for Standard or 2-speed Focus Knobs, Wireless Compact Unit WCU-3 K x Marking Disk, Flat K Marking Disk, Flat, Set 5x 87 KK for Standard or 2-speed Focus Knobs, Wireless Compact Unit WCU-3 K x Marking Disk, Flat K Marking Disk, Beveled gr 110x120x15 mm for Standard or 2-speed Focus Knobs, Wireless Compact Unit WCU-3 Page 68

72 Follow Focus Systems Follow Focus ccessories 0700 Follow Focus ccessories K Flexible Shaft Long, 300mm gr 350x70x70 mm K Flexible Shaft Long, 900mm gr 140x345x80 mm K Coupling for Flexible Shaft, not for LFF gr 25x45x25 mm For use of Flexible Shaft or Focus Lever without Focus Knob. With FF-3, can be mounted right-side; with FF-4 or FF5-HD, can be mounted left or right side. K Focus Lever Speed Handle/Focus Crank gr 55x110x20 mm L-shaped handle for fast focus pulls. K Extension for Focus Knob gr 35x95x25 mm Extends focus knob out to clear large studio matte boxes. K Reverse Gear Set 430 KK For FF-5 and FF-4 (with FF-4 only with 2x K ) K x Reverse Gear K x 43tooth, 0.8 Metric Module Gear Page 69

73 Follow Focus Systems K Reverse Gear gr to flip focus direction of FF when using Nikon lenses, for FF-5 and FF-4 (with FF-4 only with 2x K ) K Zip Gear gr 150x220x13 mm universal gearing for photo lenses and pin for manual focusing, zooming or as a support with LS-11. K Zip Gear Basic Set 200 KK K x Zip Gear K Zip Gear, spare, 1 Meter gr 150x220x10 mm K Case for FF-3/FF-4/FF-5/accessories gr Page 70

74 Follow Focus Systems Follow Focus Gears Compatible with all RRI Follow Focus. Video Lenses designated as inchcine-style inch use 0.8 metric module gears. Video Lenses designated as ENG use 0.5 or 0.6 module gears as specified below Follow Focus Gears K Follow Focus Gear M gr 10mm face. 30x30x15 mm K tooth, 0.8 Metric Module Gear gr 25mm face. 30x35x30 mm K tooth, 0.8 Metric Module Gear 86 8 gr 6mm face. K tooth, 0.8 Metric Module Gear gr 50x50x15 mm When used with FF5-HD, approximates drive ratio of FF-4. K Gear for ENG Focus and Zoom, for Canon gr 6mm face 40x40x20 mm K tooth, 0.5 Wide Face Module Gear ENG gr 40x40x20 mm 10mm face, for Lenses requiring wider focus gear. Page 71

75 Follow Focus Systems K Gear for ENG Focus and Zoom, Fujinon gr 6mm face. 40x40x20 mm K tooth, 0.6 Wide Face Module Gear ENG gr 40x40x20 mm 10mm face, for Lenses requiring wider focus gear. K tooth, 32pitch Module Gear for Panav gr 10mm face. K Friction Gear gr 35x35x15 mm for all Follow Focus units Page 72

76 Matte Boxes Mini Matte Box MMB-2 The RRI MMB-2 is a very lightweight and compact matte box; fully-featured compatible with most modern stills and cine lenses. Basic version for one 4 inch x 4 inch / 4.5 inch round filter frame and one 4 inch x 5.65 inch / 4 inch x 4 inch frame Double version replaces one 4 inch x 4 inch / 4.5 inch round filter frame with a 4 inch x 5.65 inch / 4 inch x 4 inch frame Please check Sets if Filter Frames and/or Rings are included or excluded. You can find them listed at the end of the Matte Box Section. MMB-2 back diameter Ø 114 mm Mini Matte Box MMB-2 K Mini Matte Box MMB Clamp-on Set 690 KK K x Mini Matte Box MMB-2 Basic Module K x Filter Frame Combo 4x4/4.5in, round K x LMB F4 Filter Frame 4x5,65in/4x4in K Mini Matte Box MMB-2 Basic LWS Set 880 KK K x Mini Matte Box MMB-2 Basic Module K x Filter Frame Combo 4x4/4.5in, round K x LMB F4 Filter Frame 4x5,65in/4x4in K x Console 15mm MMB-2 K x Top Flag for MMB-1 K MMB-2 double 4X5.65in 114 Clamp-on Set 810 KK K x MMB-2 Basic Module double 4x5,65in K x LMB F4 Filter Frame 4x5,65in/4x4in K MMB-2 double 4X5.65in LWS Set 970 KK K x MMB-2 Basic Module double 4x5,65in K x LMB F4 Filter Frame 4x5,65in/4x4in K x Console 15mm MMB-2 K x Top Flag for MMB-1 Page 73

77 Matte Boxes K Mini Matte Box MMB-2 Basic Module gr 114 mm back 195x270x105 mm K MMB-2 Basic Module double 4x5,65in gr 114 mm back 160x225x80 mm K Console 15mm MMB gr 80x150x30 mm K Top Flag for MMB gr 170x440x20 mm K Side Flag Set for MMB KK K x Side Flag left K x Side Flag right K x Side Flag Holder K Mattes for MMB-2, 5 pieces gr 140x220x15 mm Page 74

78 Matte Boxes K MMB-2 Handles gr 150x40x150 mm K Viewfinder dapter MMB gr 25x30x10 mm with 1/4 inch and 3/8 inch threads Page 75

79 Matte Boxes Lightweight Matte Box LMB 4x5 The LMB 4x5 is a modular matte box that expands the feature-set and creative possibilities of the LMB-25, while retaining its low introductory price and simplicity. ll clamp adapters and filter frames from the former models LMB-5, LMB-15, and LMB-25 are compatible Lightweight Matte Box LMB 4x5 KK LMB 4x5 Clamp On Set 3-Stage gr The LMB 4x5 set for clamp-on use with an additional non-rotating filter stage, a carbon fiber top flag, and a tray catcher. The weight of this configuration is approx 707g. The LMB 4x5 Clamp-On Set 3-stage comes in a foam insert that fits perfectly into any kind of Peli Case K x LMB 4x5 Basic Module K x LMB 4x5 Extra Non-Rotatable Filter Stage K x LMB 4x5 Top, Bottom Flag KK LMB 4x5 15mm LWS Set 3-Stage gr The LMB 4x5 set for 15 mm lightweight support and a universal flexible adapter to fit almost all lens diameters, including a non-rotating filter stage, a carbon fiber top flag, and a tray catcher. The weight of this configuration is approx 893. Note: 19 mm and 15 mm studio rod adapters must be ordered separately.the LMB 4x5 15mm LWS Set 3-stage comes in a foam insert that fits perfectly into any kind of Peli Case K x LMB 4x5 Basic Module K x LMB 4x5 15mm Lightweight Support Console K x LMB 4x5 Extra Non-Rotatable Filter Stage K x LMB 4x5 Tilt and Flex dapter K x LMB 4x5 Top, Bottom Flag Page 76

80 Matte Boxes KK LMB 4x5 Pro Set gr The LMB 4x5 set to fulfill all needs with the most modular matte box from single stage, to three stage, to bottom and top lightweight mounted, to the full-blown version with swing-away tilt module, all carbon fiber flags (top and side) and both extra filter stages (rotatable and non-rotatable). The weight of the whole Set is 2272g. The LMB 4x5 Pro Set comes in a foam insert that fits perfectly into any kind of Peli Case Note: 19 mm and 15 mm studio rod adapters must be ordered separately. K x LMB 4x5 Basic Module K x LMB 4x5 15mm Lightweight Support Console K x LMB ccessory dapter K x LMB 4x5 Extra Rotatable Filter Stage K x LMB 4x5 Extra Non-Rotatable Filter Stage K x LMB 4x5 Swing way Tilt Module K x LMB 4x5 Top, Bottom Flag K x LMB 4x5 Side Flags K x LMB 4x5 Flag Holders K x LMB 4x5 Tilt and Flex dapter K x LMB 4x5 Set of Mattes spherical K x LMB 4x5 Set of Mattes anamorphic KK Upgrade Set LMB-25 to LMB 4x5 Basic gr 150x260x50 mm To upgrade the LMB-25 on the platform of the LMB 4x5. K x LMB 4x5 Flag Holders K x LMB 4x5 backplate with filter guides KK Upgrade Set LMB-25 to LMB 4x5 Pro gr The Upgrade Set LMB-25 to LMB 4x5 Pro comes in a foam insert that fits perfectly into any kind of Peli Case To upgrade the LMB-25 to the full pro set of the LMB 4x5. K x LMB 4x5 15mm Lightweight Support Console K x LMB ccessory dapter K x LMB 4x5 Extra Rotatable Filter Stage K x LMB 4x5 Extra Non-Rotatable Filter Stage K x LMB 4x5 Swing way Tilt Module K x LMB 4x5 Top, Bottom Flag K x LMB 4x5 Side Flags K x LMB 4x5 Flag Holders K x LMB 4x5 Tilt and Flex dapter K x LMB 4x5 backplate with filter guides Page 77

81 Matte Boxes Lightweight Matte Box LMB 4x5 Clamp dapters RRI is offering clamp adapters fitting to the most important lens diameters in the industry. ll clamp adapters (except the 162mm) are compatible with the LMB 4x5, LMB-25, LMB-15 and LMB Lightweight Matte Box LMB 4x5 Clamp dapters KK LMB 4x5 Clamp dapter Set gr This set inlcudes 13 different clamp adapters to use with LMB 4x5 K x LMB 4x5 Clamp dapter 162mm K x LMB 4x5 Clamp dapter 143mm K x LMB 4x5 Clamp dapter 136mm K x LMB 4x5 Clamp dapter 134mm K x LMB 4x5 Clamp dapter 125mm K x LMB 4x5 Clamp dapter 114mm K x LMB 4x5 Clamp dapter 110mm K x Clamp dapter 104mm LMB-25/15 K x LMB 4x5 Clamp dapter 100mm K x LMB 4x5 Clamp dapter 95mm K x LMB 4x5 Clamp dapter 87mm K x LMB 4x5 Clamp dapter 85mm K x Clamp dapter Ø80mm K LMB 4x5 Clamp dapter 80mm 170 For Zeiss Standard and HS (Super Speed) lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 85mm gr 140x180x20 mm For Fujinon MK mm, Celere Prime lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 87mm 170 For Vario Sonnar and Cooke Mini S4/i lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. Page 78

82 Matte Boxes K LMB 4x5 Clamp dapter 95mm gr 140x180x10 mm For Ultra Prime mm, Leica Summilux and Summicron compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 100mm gr 140x180x20 mm For Schneider Xenon FF Prime lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 104mm 170 For LDS Ultra Prime mm, Cine Xenar III compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 110mm 170 For Cooke S4 lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 114mm 170 For Master Primes, Master namorphics, UP 14 mm, UP 180 mm, LDS-UP 14 mm, LDS-UP 180 mm, LUR Lightweight Zooms, and many other zoom and prime lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 125mm gr 150x180x10 mm For Hawk mm, Cooke S4/i 150 mm compatible with LMB 4x5, LMB-5, LMB- 15, and LMB-25. Page 79

83 Matte Boxes K LMB 4x5 Clamp dapter 134mm 170 For LUR Studio Zooms mm, mm and Fujinon Premier zoom lenses - compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 136mm 170 For Canon Zoom mm, mm, ngenieux mm compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 143mm gr 160x180x20 mm To use with R2 rings in combination with the LMB 4x5 15 mm LWS console or with R11 clamp-on rings (Ø 143 mm to mm). The LMB 4x5 15 mm LWS console can be mounted either on top or at the bottom compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25. K LMB 4x5 Clamp dapter 162mm gr 180x180x20 mm For ngenieux Optimo mm and mm may vignette in wide angles. Compatible with LMB 4x5 basic module and LMB-15. Not compatible with LMB-5, LMB-25 and extra filter stages LMB 4x5. Page 80

84 Matte Boxes Lightweight Matte Box ccessories for LMB 4x5/LMB-25/LMB-15/LMB Lightweight Matte Box ccessories for LMB 4x5/LMB-25/LMB-15/LMB-5 K LMB 4x5 Set of Mattes spherical x235x10 mm This set of Mattes includes 5 Mattes and fits to following Matte Boxes: LMB 4x5, LMB- 5, LMB-15, LMB-25, MB-19. K LMB 4x5 Set of Mattes anamorphic gr 150x240x20 mm This set of Mattes includes 5 anam. Mattes and fits to following Matte Boxes: LMB 4x5, LMB-5, LMB-15, LMB-25, MB-19. Page 81

85 Matte Boxes Lightweight Matte Box LMB-6 The LMB-6 offers the possibility to work with wide angle lenses and lenses with a big front diameter to be covered with 6.6x6.6 inch filter sizes. variety of clamp adapters makes it compatible with almost all lenses in the industry. lightweight and a reliable design (securing loop and tray catcher) supports todays work of camera crews on set Lightweight Matte Box LMB-6 K LMB-6 Pro Set KK Successor of Lightweight Matte Box LMB-4. Includes all LMB-6 components: K x LMB-6 Basic Module K x LMB-6 2-Filter Stage Guide K x LMB-6 3-Filter Stage Guide K x Filter Frame 6.6x6.6in K x LMB-6 Top/Bottom Flag K x LMB 4x5 / LMB 6 Tray Catcher K x LMB ccessory dapter K x Top/Bottom Flag Holder K x LMB-6 Set of Mattes K x LMB-6 Clamp dapter Ø162mm K x LMB-6 Clamp dapter Ø156mm K x LMB-6 Clamp dapter Ø136mm K x LMB-6 Clamp dapter Ø134mm K x LMB-6 Clamp dapter Ø125mm K x LMB-6 Clamp dapter Ø114mm K x LMB-6 Clamp dapter Ø110mm K x LMB-6 Clamp dapter Ø104mm K x LMB-6 Clamp dapter Ø95mm K LMB-6 2-Stage Set KK Successor of Lightweight Matte Box LMB-4. K x LMB-6 Basic Module K x LMB-6 2-Filter Stage Guide K x Filter Frame 6.6x6.6in K x LMB-6 Top/Bottom Flag K LMB-6 3-Stage Set KK Successor of Lightweight Matte Box LMB-4. K x LMB-6 Basic Module K x LMB-6 3-Filter Stage Guide K x Filter Frame 6.6x6.6in K x LMB-6 Top/Bottom Flag Page 82

86 Matte Boxes K LMB-6 ccessory Set 550 KK Bottom-mounted, tray-securing catch for crane and vehicle use; accessory shoe for all industry-standard 3/8-16 inch and 1/4-20 inch thread sizes; additional flag holder for bottom flag (pair); masks (5x). K x LMB 4x5 / LMB 6 Tray Catcher K x LMB ccessory dapter K x Top/Bottom Flag Holder K x LMB-6 Set of Mattes K LMB-6 Clamp dapter Set KK Set of all available LMB-6 clamp adapters. K x LMB-6 Clamp dapter Ø162mm K x LMB-6 Clamp dapter Ø156mm K x LMB-6 Clamp dapter Ø136mm K x LMB-6 Clamp dapter Ø134mm K x LMB-6 Clamp dapter Ø125mm K x LMB-6 Clamp dapter Ø114mm K x LMB-6 Clamp dapter Ø110mm K x LMB-6 Clamp dapter Ø104mm K x LMB-6 Clamp dapter Ø95mm K LMB-6 Clamp dapter Ø162mm gr 180x235x16 mm The 162 mm clamp adapter is available for the ngenieux Optimo and K LMB-6 Clamp dapter Ø156mm gr 180x235x16 mm Fits all existing R12 clamp-on reduction rings (see rings section). K LMB-6 Clamp dapter Ø136mm gr 180x230x16 mm Page 83

87 Matte Boxes K LMB-6 Clamp dapter Ø134mm gr 180x230x16 mm K LMB-6 Clamp dapter Ø125mm gr 180x225x16 mm K LMB-6 Clamp dapter Ø114mm gr 180x225x16 mm K LMB-6 Clamp dapter Ø110mm gr 180x225x16 mm K LMB-6 Clamp dapter Ø104mm gr 180x220x16 mm K LMB-6 Clamp dapter Ø95mm gr 180x220x16 mm Page 84

88 Matte Boxes Lightweight Matte Box ccessories for LMB-25/LMB-6 Like the LMB 4x5, LMB-25, the LMB-6 can be fitted with an accessory mount for 3/8 inch accessories such as ultrasonic measuring devices. The tray catcher offers security by preventing the loss of a filter frame e.g. when the matte box is flying on a crane Lightweight Matte Box ccessories for LMB-25/LMB-6 K LMB 4x5 / LMB 6 Tray Catcher gr 23x36x18 mm Bottom-mounted to secure filter trays in place compatible with LMB 4x5 / LMB-25 / LMB-6. K LMB ccessory dapter gr 70x200x40 mm For 3/8 inch accessories such as ultrasonic devices-compatible with LMB-25 / LMB-6 with the additional sliding possibility for a perfect positioning. K /8in ccessory Shoe gr 21x36x20 mm For 3/8 inch accessories such as ultrasonic devices compatible with LMB-25 / LMB- 6. Page 85

89 Matte Boxes Studio Matte Box SMB-1 The SMB-1 is a studio matte box for filter sizes up to 6.6 inch x 6.6 inch. It is designed for bigger wide-angle prime lenses as well as zooms. The SMB-1 Tilt has an exclusive integrated tilt module designed to help counteract artifacts linked to filter reflections. basic version without tilt function is also available. ll versions benefit from stackable filter stages to allow quick reconfigurations and a unique choice of sunshades 4:3 or 2:1 ratio, optimized respectively for spherical and anamorphic filming. Fits R1 Rings with back diameter Ø 165 mm Studio Matte Box SMB-1 K SMB-1 Tilt Set 19mm KK K x SMB-1 Tilt K x SMB-1 2-Filter Stage incl 2 Filter Frame K x SMB-1 1-Filter Stage incl 1 Filter Frame K x SMB-1 19mm Studio rm K x 6in Tilting Filter Ring 150mm K SMB-1 Tilt Set 15mm KK K x SMB-1 Tilt K x SMB-1 2-Filter Stage incl 2 Filter Frame K x SMB-1 1-Filter Stage incl 1 Filter Frame K x SMB-1 15mm Studio rm K x 6in Tilting Filter Ring 150mm K SMB-1 Basic Set 19mm KK K x SMB-1 Basic K x SMB-1 2-Filter Stage incl 2 Filter Frame K x SMB-1 1-Filter Stage incl 1 Filter Frame K x SMB-1 19mm Studio rm K SMB-1 Basic Set 15mm KK K x SMB-1 Basic K x SMB-1 2-Filter Stage incl 2 Filter Frame K x SMB-1 1-Filter Stage incl 1 Filter Frame K x SMB-1 15mm Studio rm Page 86

90 Matte Boxes K SMB-1 Lightshield set KK K x SMB-1 Top/Bottom Flag K x SMB-1 Side Flags, Pair K SMB-1 ccessory Set 980 KK K x SMB-1 Mattes Sph. K x SMB-1 Mattes Sph./nam. K x SMB ccessory dapter K x Flexible Shaft K x SMB Top/Bottom Flag Holders 2pcs. K SMB-1 adapter for SMB-2 Filter Stages gr 200x240x15 mm step-down adapter that permits SMB-2 4 inch x 5.65 inch filter stages to be mounted to the 6.6 inchx 6.6 SMB-1, without affecting wide-angle coverage. The adapter also allows SMB-2 filter stages to be mounted to the back of a stack of SMB- 1 filter stages. If needed, SMB-2 filter stages (1-stage K , 2-stage K ) and SMB-2 back plate adapter (K ) can be ordered separately. Page 87

91 Matte Boxes Studio Matte Box SMB-2 The Studio Matte Box SMB-2 is optimized for the filter size 4 x 5.65 vertical and horizontal. It is suited for most prime lenses and smaller zooms. The SMB-2 Tilt has an exclusive, integrated tilt module and all versions benefit from stackable filter stages, allowing quick reconfiguration. Uniquely, both 4:3 and 2:1 ratio sunshades are available, optimized respectively for spherical and anamorphic filming. On LEX 2.8K and 3-filter stage configuration, the SMB-2 covers lenses up to the 14 mm Master Prime and 14 mm Ultra Prime, as well as all LUR zooms. Fits R2 Rings with back diameter Ø 143 mm Studio Matte Box SMB-2 K SMB-2 Tilt Set 19mm KK K x SMB-2 Tilt K x SMB-2 2-Filter Stage incl. 2 Filter Frames K x SMB-2 1-Filter Stage incl. 1 Filter Frame K x SMB-2 19mm Studio rm K x R2 138mm Tilting Filter Ring 114mm K SMB-2 Tilt Set 15mm KK K x SMB-2 Tilt K x SMB-2 2-Filter Stage incl. 2 Filter Frames K x SMB-2 1-Filter Stage incl. 1 Filter Frame K x SMB-2 15mm Studio rm K x R2 138mm Tilting Filter Ring 114mm K SMB-2 Basic Set 19mm KK K x SMB-2 Basic K x SMB-2 2-Filter Stage incl. 2 Filter Frames K x SMB-2 1-Filter Stage incl. 1 Filter Frame K x SMB-2 19mm Studio rm K SMB-2 Basic Set 15mm KK K x SMB-2 Basic K x SMB-2 2-Filter Stage incl. 2 Filter Frames K x SMB-2 1-Filter Stage incl. 1 Filter Frame K x SMB-2 15mm Studio rm Page 88

92 Matte Boxes K SMB-2 Lightshield Set KK K x SMB-2 Top/Bottom Flag K x SMB-2 Side Flags, Pair K SMB-2 ccessory Set 890 KK K x SMB-2 Mattes Sph. K x SMB-2 Mattes Sph./nam. K x SMB ccessory dapter K x SMB Top/Bottom Flag Holders 2pcs. K x Flexible Shaft Matte Box Cases Industrial cases for Studio Matte Boxes Matte Box Cases K Case for SMB x584x325 mm With variable deviders and compatible with MB-14 and MB-28. K Case SMB gr 320x500x410 mm special designed for SMB-2 Page 89

93 Filter Frames Diopter Frames RRI s diopter accessories are offering a simple, reliable and safe way using close-up or split diopters with a clip-on matte box such as RRI s LMB 4x5 or LMB Diopter Frames K Diopter Frame 138mm gr 150x170x20 mm The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweight matte box such as the RRI LMB 4x5 or LMB-25. The frame has the width of two 4 x 5.65 filter frames and fits into a 2- or 3-filter stage. safety mechanism prevents the diopter from falling out of the frame during exchange, while two ¼ threads permit the frame to be attached to an articulating arm. K Diopter Stage 138mm gr 180x180x40 mm The diopter stage can be used at the back of a 4 inch x 5.65 inch clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. s with the diopter frame, a safety device and ¼ mounting threads are included. K Diopter dapter 138mm to 4.5in gr 140x140x10 mm The diopter adapter is compatible with both diopter stage and diopter frame 138mm and allows the use of 4,5 inch close-up diopters. Page 90

94 Rings MMB-2 Rings direct use with MMB-2 Basic or Double with back diameter of 114 mm 1950 MMB-2 Rings K Light Protection Ring Set Pro 370 KK K x Connection Ring flexible 52 K x Connection Ring flexible 58 K x Connection Ring flexible 62 K x Connection Ring flexible 67 K x Connection Ring Flexible 72 K x Connection Ring flexible 77 K x Connection Ring flexible 82 K x Flexible Light Protection K Light Protection Ring Set Basic 180 KK K x Connection Ring Flexible 72 K x Connection Ring flexible 77 K x Connection Ring flexible 82 K x Flexible Light Protection K Connection Ring flexible gr 105x105x10 mm K Connection Ring flexible gr 105x105x10 mm K Connection Ring Flexible gr 105x105x10 mm Page 91

95 Rings K Connection Ring flexible gr 105x105x10 mm K Connection Ring flexible gr 105x105x10 mm K Connection Ring flexible gr 105x105x10 mm K Connection Ring flexible gr 105x105x10 mm K Flexible Light Protection gr 60x155x10 mm K Reduction/Clamp-On Ring Set Cine Pro 410 KK K x Reduction/Clamp-On Ring 110mm, Cooke S4 K x Reduction/Clamp-On Ring 104mm,UP LDS K x Reduction/Clamp-On Ring 95mm, UP K x Reduction/Clamp-On Ring 87mm K x Reduction/Clamp-On Ring 80mm Page 92

96 Rings K Reduction/Clamp-On Ring 110mm, Cooke S gr 115x115x20 mm K Reduction/Clamp-On Ring 104mm,UP LDS gr 115x115x20 mm K Reduction/Clamp-On Ring 95mm, UP gr 145x25x160 mm K Reduction/Clamp-On Ring 87mm gr 114x114x mm K Reduction/Clamp-On Ring 80mm gr 150x130x20 mm K MMB-2 Reduction/Clamp-On Ring 85mm 93 The ring is compatible with Fujinon MK18-55mm T2.9, Fujinon MK50-135mm T2.9 and Celere HS Lenses Page 93

97 Rings K Still Lens Clamp-On Set Pro 340 KK for still photo lenses threads K x Still Lens Clamp-On Ring 52 K x Still Lens Clamp-On Ring 58 K x Still Lens Clamp-On Ring 62 K x Still Lens Clamp-On Ring 67 K x Still Lens Clamp-On Ring 72 K x Still Lens Clamp-On Ring 77 K x Still Lens Clamp-On Ring 82 K Still Lens Clamp-On Set Basic 150 KK for still photo lens threads K x Still Lens Clamp-On Ring 72 K x Still Lens Clamp-On Ring 77 K x Still Lens Clamp-On Ring 82 K Still Lens Clamp-On Ring gr 115x115x10 mm K Still Lens Clamp-On Ring gr 115x115x10 mm K Still Lens Clamp-On Ring gr 115x115x10 mm Page 94

98 RRI Filter Rota Pola Frame The Rota Pola Filter Frame 4x5,65 is compatible with LMB-5, LMB-15, LMB-25, LMB 4x5 and MB-19 matte box filter stages. It is friction driven and offers a feature to lock the filter in position as soon as it is set in the right position Rota Pola Frame K Rota Pola Filter Frame gr 210x230x50 mm The Rota Pola Filter Frame 4x5,65 has the same width of a regular F4 filter frame and therefore only takes the space of one filter in a filter stage. The glass inside is a round shaped circular polarizer which takes less than 1.2 stops of light. Page 95

99 Cine Primes 35mm RRI Ultra Prime RRI Ultra Primes have the widest focal range of any Super 35 prime lens set available to cover every cinematic need: from the unique Ultra Prime 8R extreme wide angle lens to the best telephoto lens designed specifically for motion pictures, the Ultra Prime 180 mm, giving you the flexibility to get the coverage you want. Ultra Primes are compatible with digital and film cameras. They retain their excellent image quality even at close focus across the whole Super 35 frame. The Ultra Primes are small and lightweight standard speed lenses in a rugged housing that are a perfect optical match to the high speed Master Primes. ll Ultra Primes are carefully color matched to each other and to the other lenses in the RRI lens portfolio. The lura and lura as well as the Master Primes, Master Macro 100 and LDS Ultra Primes are equipped with the Lens Data System (LDS). These lenses continually transmit their status to any LDS equipped camera, where the information can be displayed either on the video assist (film cameras), MON OUT or electronic viewfinder (LEXs) or on the Lens Data Display for Focus Puller (LDD-FP) for faster and smoother working on the set. The LEX family of cameras records the LDS information into metadata for more efficient VFX or 3D post production RRI Ultra Prime K RRI Ultra Prime 8R/T2.8,m K RRI Ultra Prime 12/T2.0,m K RRI Ultra Prime 14/T1.9,m K RRI Ultra Prime 16/T1.9,m K RRI Ultra Prime 20/T1.9,m K RRI Ultra Prime 24/T1.9,m Page 96

100 Cine Primes 35mm K RRI Ultra Prime 28/T1.9,m K RRI Ultra Prime 32/T1.9,m K RRI Ultra Prime 40/T1.9,m K RRI Ultra Prime 50/T1.9,m K RRI Ultra Prime 65/T1.9,m K RRI Ultra Prime 85/T1.9,m K RRI Ultra Prime 100/T1.9,m K RRI Ultra Prime 135/T1.9,m Page 97

101 Cine Primes 35mm K RRI Ultra Prime 180/T1.9,m K RRI Ultra Prime 8R/T2.8,ft K RRI Ultra Prime 12/T2.0,ft K RRI Ultra Prime 14/T1.9,ft K RRI Ultra Prime 16/T1.9,ft K RRI Ultra Prime 20/T1.9,ft K RRI Ultra Prime 24/T1.9,ft K RRI Ultra Prime 28/T1.9,ft K RRI Ultra Prime 32/T1.9,ft K RRI Ultra Prime 40/T1.9,ft K RRI Ultra Prime 50/T1.9,ft K RRI Ultra Prime 65/T1.9,ft K RRI Ultra Prime 85/T1.9,ft K RRI Ultra Prime 100/T1.9,ft K RRI Ultra Prime 135/T1.9,ft K RRI Ultra Prime 180/T1.9,ft RRI Ultra Prime Cases 0900 RRI Ultra Prime Cases K Ultra Prime Case 800 Case for six Ultra Primes except 8 mm, 10 mm, 14 mm and 180 mm. Page 98

102 Cine Zooms 35mm RRI lura Zoom 0300 RRI lura Zoom K RRI LUR Zoom /T2.8,m High quality lightweight and compact wide angle zoom with Lens Data System LDS PL mount, maximum aperture T2.8. K RRI LUR Zoom 30-80/T2.8,m High quality lightweight and compact telephoto zoom with Lens Data System LDS PL mount, maximum aperture T2.8. K RRI LUR Zoom 18-80/T2.6,ft High quality wide angle studio zoom with a PL mount and a maximum aperture of T2.6. K RRI LUR Zoom 30-80/T2.8,ft RRI lura Extender High quality lightweight and compact telephoto zoom with Lens Data System LDS PL mount, maximum aperture T RRI lura Extender K RRI LUR Extender 1.4x LDS x Extender lense specifically designed to be partnered with cameras equipped with LUR Zoom Lenses K RRI LUR Extender 2.0x LDS x Extender lenses specifically designed to be partnered with cameras equipped with LUR Zoom Lenses Page 99

103 Lens ccessories Optical Cleaning Items Removes dust, dirt, and oil quickly 100% polyester, with Epicros E, which forms a permanent anti-static membrane Machine wash cold Durable and excellent absorbency 0300 Optical Cleaning Items K Optical Cleaning Cloth 14.6'' x 17.7" x370x2 mm Professional Cleaning Cloth for Optical-quality Glass Page 100

104 Crew Supplies Bags The tough, adaptable RRI Unit Bags II will protect your equipment from the rigors of life on set.they're covered in durable waterproof fabric, the interior is fully padded, and all edges are reinforced. removable and washable rain cover also protects the bag from dirt and dust. They have lots of pouches and accessory pockets for bits of kit, and the main compartment can be customized with soft but sturdy dividers. Strong fabric loops on the front of the bag allow the attachment of additional kit, with the aid of carabiners. The bags come with two detachable shoulder straps, and handles with a cloth hand-grip for more carrying comfort Bags K Unit Bag Small II gr 265x470x265 mm RRI s Unit Bag Small II can be used as hand luggage in airplanes. You can put any extra bits and pieces in the three differently size exterior pockets, or in the included three removable accessory pouches. It comes with an elastic drawstring and cord lock on the top of the lid. Weight (gr): 350 WxHxD (mm): 470x265x265 K Unit Bag Medium II gr 290x600x330 mm The RRI Unit Bag Medium II comes with a detachable zipped document bag that provides additional storage space for documents or a tablet. It fits to the top of the lid with the aid of fabric hook-and-loop strips. The flexible accessory pockets can be additionally fixed inside the bag or on top of the lid when the document bag is removed. Weight (gr): 450 WxHxD (mm): 600x290x330 K Unit Bag Large II gr 300x670x365 mm The RRI Unit Bag Large II offers the maximum space for your accessories. The Bag comes with a detachable zipped document bag that provides additional space for documents or a tablet. It fits to the top of the lid with the aid of fabric hook-andloop strips. The flexible accessory pockets can be additionally fixed inside the bag or on top of the lid when the document bag is removed. The bag's exterior pockets are augmented by two additional can pouches. Weight (gr): 550 WxHxD (mm): 670x300x365 K Unit Bag Small II Pocket Set 50 1x long pocket 2x short pocket 1x luggage tag Page 101

105 Crew Supplies K Unit Bag Small II Divider and Cord Set 40 1x long devider 2x short devider 4x hook-and-loop 1x cord 1x luggage tag K Unit Bag Medium II Pocket Set 65 1x long pocket 4x short pocket 1x luggage tag K Unit Bag Medium II Divider and Cord Set 50 2x long devider 2x short devider 4x hook-and-loop 1x luggage tag K Unit Bag Medium II Document Bag 40 1x document bag, 1x luggage tag 35x400x220 mm K Unit Bag Large II Pocket Set 75 1x long pocket 4x short pocket 1x luggage tag Page 102

106 Crew Supplies K Unit Bag Large II Divider and Cord Set 55 3x short devider 2x long devider 6x hook-and-loop 2x cord 1x luggage tag K Unit Bag Large II Document Bag 50 1x document bag 1x luggage tag 50x460x280 mm K Unit Bag Shoulder Strap 40 25x1350x90 mm RRI Shoulder Strap for Unit Bag S, M and L. 1x shoulder strap 1x luggage tag K Unit Bag Rain Cover 15 Rain Cover for Unit Bag S, M and L. It can also be used to protect other pieces of equipment. 1x rain cover, 1x luggage tag Page 103

107 Price List - EU 05/2018 RRI cademy Ident Nr Product Description/Weight & Dimensions Price 54 Certified RRI cademy RRI User Training Offering a wide range of modular, multi-day training courses in different countries and languages worldwide, RRI cademy is the best route for users of all abilities to gain hands-on knowledge of RRI products and workflows, and build their on-set confidence. Taught by RRI-trained industry professionals, RRI cademy courses provide unrivalled insight into the full possibilities of working with RRI camera systems, lenses, lights and accessories. Courses cover specific products, or can be customdesigned to meet your particular needs. t the end of whichever course you choose, you will come away with a certificate indicating your product competence RRI Certified User Training RRI Certified Training for Camera Systems (2,5 days) per person 2,5-day, hands-on training course for cinematographers, operators, assistants and DITs, with or without prior RRI camera experience. Fine tune your camera knowledge. Learn the most important functions of the LEX LF, LEX Mini, LEX SXT W and MIR, as well as the numerous application areas and setups for which they can be used. This modular, professionally-tutored course covers: Menu Configuration, RRIRW, Log C vs. Rec 709, Lens Mounts, Recording Formats, Lens mounts and Lenses, Exposure, Electronic Control System, RRI Looks, udio Options, Data Management and Postproduction. t the end of the course you will come away with a certificate indicating your complete understanding of the camera and all its functions RRI Certified Training for LEX Mini and MIR (2 days) per person 2-day, hands-on training course for cinematographers, operators, assistants and DITs, with or without prior experience. Fine tune your camera knowledge. Learn the most important functions of the LEX Mini and MIR, as well as the numerous application areas and setups for which it can be used. This modular, professionally-tutored course covers: Menu Configuration, RRIRW, Log C vs. Rec 709, Lens Mounts and lenses, Recording Formats, Exposure, Electronic Control System, RRI Looks, Data Management and Postproduction. t the end of the course you will come away with a certificate indicating your complete understanding of the camera and all its functions. Page 104

108 Price List - EU 05/2018 RRI cademy Ident Nr Product Description/Weight & Dimensions RRI Certified Training for LEX SXT and LEX Mini (2 days) Price per person 2-day, hands-on training course for cinematographers, operators, assistants and DITs, with or without prior LEX experience. Fine tune your camera knowledge. Learn the most important functions of the LEX SXT and LEX Mini, as well as the numerous application areas and setups for which it can be used. This modular, professionally-tutored course covers: Menu Configuration, RRIRW, Log C vs. Rec 709, Recording Formats, Exposure, Electronic Control System, RRI Looks, Data Management and Postproduction. t the end of the course you will come away with a certificate indicating your complete understanding of the camera and all its functions RRI Certified Training for LEX Mini (1,5 days) 975 per person 1,5-day, hands-on training course for cinematographers, operators, assistants and DITs, with or without prior LEX experience. Fine tune your camera knowledge. Learn the most important functions of the LEX Mini, as well as the numerous application areas and setups for which it can be used. This modular, professionally-tutored course covers: Menu Configuration, RRIRW, Log C vs. Rec 709, Lens Mounts and lenses, Recording Formats, Exposure, Electronic Control System, RRI Looks, Data Management and Postproduction. t the end of the course you will come away with a certificate indicating your complete understanding of the camera and all its functions RRI Certified Training for dvanced Color Science (2,5 days) per person 2,5-day, hands-on training course for cinematographers, colorists, DITs and technical staff in postproduction. This course covers the most important aspects of color science. You will gain a deeper understanding of the possible interactions of light, object color, and camera. Our Principal Engineer of Image Science will detail the many possibilities for image processing in camera and in postproduction. t the end of the course you will come away with a certificate indicating your complete understanding to work with a spectrometer, calibrate monitors, and understand color spaces. Page 105

109 Price List - EU 05/2018 RRI cademy Ident Nr Product Description/Weight & Dimensions RRI Certified Training for Lighting Technology (1,5 days) Price 975 per person 1,5-day, hands-on training course for lighting professionals, DPs, gaffers, electricians and assistants, with or without prior RRI lighting experience. With emerging LED technologies, lighting for film and TV is getting more complex, although the creative possibilities are expanding. Only by learning about the characteristics of different lighting technologies and fixture types can you be confident of choosing the right gear for each project. t the end of the course you will come away with a certificate indicating your complete understanding of the camera and all its functions Customized Training Course 790 per person Custom-designed, hands-on training course for cinematographers, operators, DITs, lighting professionals, gaffers, electricians and assistants with or without prior experience. Fine tune your knowledge. Learn the most important functions of our products, as well as the numerous application areas and setups for which it can be used. This modular, professionally-tutored course is tailored to your needs and covers whatever subjects you would like to focus on. Minimum 4 participants required One-on-One Training 190 per hour Bespoke, hands-on training course for cinematographers, operators, assistants and DITs, with or without prior experience. Fine tune your camera knowledge. Learn the most important functions of our camera systems, as well as the numerous application areas and setups for which they can be used. This modular, professionally-tutored course is tailored to your needs and covers whatever subjects you would like to focus on. t least 4 hours minimum per One-on-One Training required. Page 106

110 Price List - EU 05/2018 RRI cademy Ident Nr Product Description/Weight & Dimensions Price RRI dvanced Service Training 0200 RRI dvanced Service Training RRI dvanced Service Training for LEX Mini (1 day) 790 per person 1-day, hands-on service training for current or aspiring camera technicians. Covers service and maintenance of LEX Mini cameras and can be tailored to your individual needs. Includes error analysis, regular maintenance procedures, operation of test equipment and software as well as special tools. Participation qualifies for access to special tools, test equipment, analysis software and spare part sets designed for LEX Mini dvanced Service only. Each participant and company will receive an RRI dvanced Service Training certificate RRI dvanced Service Training for MIR and LEX Mini (1,5 days) per person 1,5-day, hands-on service training for current or aspiring camera technicians. Covers service and maintenance of MIR and LEX Mini cameras and can be tailored to your individual needs. Includes error analysis, regular maintenance procedures, operation of test equipment and software as well as special tools. Participation qualifies for access to special tools, test equipment, analysis software and spare part sets designed for dvanced Service only. Each participant and company will receive an RRI dvanced Service Training certificate. 98 N Notes Notes 0100 Notes T tba This price list replaces all previously published price lists. T tba - phase out - indicates items that will be discontinued and are available until stock runs out. T tba - - indicates items that have been added since the last publication of this price list. T tba complete list of support systems can be found in the PC price list. T tba complete list of follow focus units and accessories can be found in the PC price list. T tba complete list of matte boxes and accessories can be found in the PC price list. T tba complete list of Electronic Control System (ECS) components can be found in the PC price list. Page 107

111 Please see the RRI price lists for all information on RRI Camera Systems products LEX MIR RRI Lenses Camera Stabilizer Systems Pro Camera ccessories RCHIVE TECHNOLOGIES