Fiber Management Tray 2 Rack Unit (2 RU) Style FMT-G Series
|
|
- Aron Chase
- 5 years ago
- Views:
Transcription
1 2 Rack Unit (2 RU) Style FMT-G Series ADC has expanded its Fiber Management Tray (FMT) family to include two rack unit (2 RU) high trays (FMT-G series). Available for termination only (with adapters only, or preterminated with IFC or multifiber cable), and termination and splice, the FMT-G series features sliding adapter packs which allow easy access for connecting jumpers and cleaning connectors, ensuring that any fiber can be installed or removed without inducing a macrobend on an adjacent fiber. The FMT-G series is also available to house micro Value-Added Modules (MicroVAMs) for splitting and monitoring optical signals, providing additional flexibility and functionality. The trays are lockable, further ensuring integrity of the fibers by greatly reducing the chance for accidents.
2 Termination with Adapters Only The termination-only fiber management tray provides termination for 72 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish 72-Termination with Adapters Only FMT-GRT A72 Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Adapters Loaded A Adapters loaded 0 No adapters Sliding Adapter Pack Shown in Access Position 2
3 Termination with IFC or Multifiber Cable The termination-only fiber management tray provides termination for 72 fibers and can be ordered preterminated with IFC or multifiber cable. This tray mounts in 19-inch, 23-inch or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Cable Type C IFC stranded (62.5/125) Y IFC stranded (50/125) A IFC stranded M IFC ribbon H Indoor/outdoor Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish 72-Termination with IFC or Multifiber Cable FMT-GN7 - A 7 2 Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Length (in meters) 3
4 Termination and Splice The termination and splice tray terminates and splices 48 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Panels loaded with pigtails come with color-coded 900 micron pigtails. Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish Cable or Adapter Type A Adapters only 0 No adapters C pigtails (50/125) K pigtails (62.5/125) U Maxi-Strip pigtails FMT-GTL A48 48-Termination/Splice Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Chip Style (mini splice tray) 0 None 2 Heat shrink 3 Mechanical 4
5 Sliding Adapter Packs Ordering Information Description SC LC LX.5 FC ultra polish SC ultra polish FC angled polish SC angled polish FC with zirconia adapter SC with zirconia adapter LC ultra polish LX.5 angled polish Accessories Ordering Information Description Cable clamp kits.25" offset from frame 1.25" offset from frame Vertical cable guides Black Putty FMT-6SAP09 FMT-6SAP06 FMT-6SAP0Y FMT-6SAP02 FMT-6SAP07 FMT-6SAP0F FMT-6SAP0J FMT-6SAP0L FMT-6SAP0N FMT-6SAP08 FMT-6SAP0X FMT-ACCCLMP01 FMT-ACCCLMP02 FMT-ACC21B FMT-ACC21P Cable FMT-ACCCLMP " Offset from Rack Cable Rack FMT-ACCCLMP " Offset from Rack Vertical Cable Guide Cable Clamp Kit 5
6 Micro Value-Added Module System The 2RU FMT Value-Added Module (VAM) chassis houses up to twelve MicroVAMs. These MicroVAMs are used for testing and monitoring optical signals; technicians can access both directions of the signal without disrupting service. MicroVAM Shown in Access Position Ordering Information Description 2 RU Fiber Management Tray (FMT-G Series) accommodates up to 12 MicroVAMs for monitoring optical signals FMT-G Series with MicroVAM FMT-GVM00000-A72P Ordering Information for Micro Value-Added Modules follows on the next page. 6
7 Micro Value-Added Module System Monitor Module Ordering Information FMT-M Input Connector/Adapter 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish or ** 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC Output Connector/Adapter 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish ** or 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC B Customer Premises Monitor Module XX% SPLITTER B XX% RxM J Dual Monitor Cross-Connect Module Style B Cross-connect customer premises J Dual monitor S Splitter module Split Ratio A 90/10 B 95/05 C 50/50 H 70/30 J 60/40 K 99/01 L 98/02 Monitor Connector Type 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish or ** 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC Contact ADC at , for specifications and available split ratios. Mon Tx Mon Rx S Splitter Module A1 TxM A2 XX% SPLITTER A XX% RxN TxN Tx Rx A B1 CUST Tx Tx SRC B2 SRC Tx Rx SRC B 7
8 Web Site: From North America, Call Toll Free: Outside of North America: Fax: For a listing of ADC s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer /03 Original 2003 ADC Telecommunications, Inc. All Rights Reserved
Spec Sheet. TrueNet TFP Series Rack Mount Fiber Panels. Features: Applications and Benefits:
ADC introduces the TFP Series rack mount fiber panels as an integral part of the TrueNet Fiber product portfolio. The TFP Series fiber panels can be ordered in one, two and five rack unit sizes and are
More informationFiber Optic Panels. 1st Edition. Fiber connectivity solutions
Fiber Optic Panels 1st Edition Fiber connectivity solutions Table of Contents Introduction... 1 FMT Series Fiber Optic Panel Introduction... 8 1 RU Fiber Termination/Splice Drawers with Adapters or Pigtails...
More informationLSX Optical Distribution Frame
LSX Optical Distribution Frame Introduction...79 Things to Consider When Ordering...80 Fiber Distributing Frame...81 Preterminated Fiber Termination Panels with Multifiber Cable-IFC..82 Adapter-Only Fiber
More informationSpec Sheet. OmniReach FTTX Solutions DLX Fiber Optic Connector
ADC s is a Next Generation hardened fiber optic connector designed to provide a cost-effective solution for connecting Outside Plant (OSP) fiber networks. The DLX connector is a miniature hardened connector
More informationFPX Series Fiber Panels Next Generation FPL
TE Connectivity's (TE) FPX series provides industry-leading fiber cable protection and management in a modular footprint. The panel utilizes an internal splicing system that creates a compact, feature-rich,
More informationTrueNet TFP Series Rack Mount Fiber Panels
TFP Series Rack Mount Fiber Panels The rack mount TrueNet Fiber Panel (TFP) is an integral part of the TrueNet Fiber product portfolio. The TFP fiber panels can be ordered in one, two and five rack unit
More informationSPEC SHEET. Digital Monitor Module System. 75 Ohm Interconnect. Features:
Designed as a flexible solution for network signal management, ADC s Digital Monitor Module (DMM) system provides a centralized coaxial termination and interconnection point between network elements (NE).
More informationTwo Rack Unit (2RU) Fiber Management Tray (FMT) User Manual
Two Rack Unit (2RU) Fiber Management Tray (FMT) User Manual 18701-B 2RU FMT (Micro-VAM Configuration Shown) Content Page INTRODUCTION.............................................................................
More informationLightLink Customer Premise System CPS012 Fiber Termination Patch Panel
CPS012 Fiber Termination Patch Panel The CPS012 provides a compact and versatile method of splicing and connectivity of up to 12 fibers. The panel comes with a master plate to accommodate two LGX compatible
More informationRMG Series Rack Mount Fiber Enclosures
The RMG Series rack mount fiber enclosures is as an integral part of the TE Connectivity product portfolio. The RMG Series fiber enclosure provides rugged and durable protection for patching or splicing
More informationHigh Density LSX 288-Position Panel
CommScope introduces the new high-density LSX 288-position panel available preterminated with intrafacility (IFC) or outside plant (OSP) cables or in termination and splice configurations. CommScope s
More informationFTTX Solutions Passive Optical Splitter Modules. 7th Edition
Passive Optical Splitter Modules 7th Edition Passive Optical Splitter Modules Introduction...1 Applications...2 Splitter Specifications...3 Mini Plug-and-Play Modules...4 GF Modular Splitter Block...5
More informationManaging Density Managing Density in the Data Center: A Long-term Approach for the Future
Managing Density Managing Density in the Data Center: A Long-term Approach for the Future Increasing capacity and network applications create new challenges for both the planners who design and the operations
More informationOptical Distribution Frames. 3rd Edition
Optical Distribution Frames 3rd Edition Table of Contents Introduction...1 High-Density Frame Solutions NGF Optical Distribution Frame...4 Introduction...4 Things to Consider When Ordering...6 Fiber Main
More informationTrueNet WMG Series Wall Mount Fiber Enclosures
The TrueNet WMG Series wall mount fiber enclosures are ideal for LAN applications requiring a fully enclosed and lockable wall mount enclosure. The cabinets are one or two door direct termination and splice
More informationFPX SERIES FIBER PANELS
FPX SERIES FIBER PNELS TE Connectivity s (TE) FPX series provides industry-leading fiber cable protection and management in a modular footprint. Now redesigned with a depth of.0 or less and with front
More informationLSX Optical Distribution Frames
LSX Optical Distribution Frames Contents Introduction 3 High-density distribution frame solution (using 288-termination/splice panel) 4 Traditional LSX universal fiber distributing frame solution 5 Preterminated
More informationFSXpert Optical AB Protection Switch
Features: Automatic, remote, or manual operation Main and backup signals monitored User-set switching threshold 850/1310 (MM) and 1310/1550 (SM) bandpass -48 Vdc operation Single, Tandem, or Dual configuration
More informationNG3 High-Density Fiber Distribution Frame System Termination, Termination/Splice, VAM, and MPO Panels
NG3 High-Density Fiber Distribution Frame System Termination, Termination/Splice, VAM, and MPO Panels User Manual ADCP-90-297 Issue 9 3/2010 1685349 Rev A Preface COPYRIGHT All Rights Reserved REVISION
More informationData Center Optical Distribution Frame Solutions
Data Center Optical Distribution Introduction... 260 Fiber Main Distribution Frame... 262 Fiber Termination Blocks (FTBs)... 265 Sliding Adapter Packs... 272 Data Center Splice Cabinet... 273 Accessories...
More informationFiber Management Tray (FMT) User Manual
Fiber Management Tray (FMT) User Manual Fiber Management Tray Content Page INTRODUCTION............................................................................. 2 ADMONISHMENTS...........................................................................
More informationFibre Enlosures and Splicing
Fibre Enlosures and Splicing Siemon s fibre enclosures provide feature-rich and easily implemented options for managing critical fibre connectivity. With versions supporting up to 88 fibre ports, Siemon
More informationNext Generation Frame Fiber Termination Block With MPO Connectors (FTB w/mpo) User Manual
Next Generation Frame Fiber Termination Block With Connectors ( w/) User Manual ADCP-90-372 Issue 2 4/2010 23867-A Block With Connectors 1685947 Rev A Preface COPYRIGHT 2008, ADC Telecommunications, Inc.
More informationFL2000 System. Table of Contents. 4/ FL2000 System
FL000 Products FL000 System Table of Contents Introduction... Applications...-6 Wall Mount Boxes - Empty...7 Wall Mount Boxes - Accessories...8 Rack or Cabinet Mount Panels - Empty Termination Panel...9
More informationCloset Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
More informationFL1000. Customer Premises Fiber Termination Products. Features:
FL1000 ustomer Premises Fiber Termination Proucts AD s FL1000 customer premises fiber termination proucts inclue a variety of one an two oor wall mount panels, as well as rack mount panels. These proucts
More information1U Shelves: Fixed & Sliding - 1U S-LIU/F-LIU Efficient Connection Management that Helps You Save on Maintenance and Replacement Costs
1U Shelves: Fixed & Sliding - 1U S-LIU/F-LIU Efficient Connection Management that Helps You Save on Maintenance and Replacement Costs Features and Benefits Slim 1 unit mounting height (1U rack space) Front-mounted
More informationFL1000 Wall-Mount Box Installation and Operation Guide
FL1000 Wall-Mount Box Installation and Operation Guide ONE DOOR (FL1-B) TWO DOOR (FL1-H) 19706-B FL1000 Wall-Mount Box Content Page INTRODUCTION.............................................................................
More informationNext Generation Frame (NGF) Optical Distribution Frame Solution P RO DU CT CAT ALO G 2 n d ED ITION
Next Generation Frame (NGF) Optical Distribution Frame Solution 2016 P RO DU CT CAT ALO G 2 n d ED ITION Contents Introduction 1 Fiber Main Distribution Frame (FMDF) 2 Frame Accessories 3 Fiber Optic
More informationNext Generation Frame - Black (NGFB) Optical Distribution Frame Solution
Next Generation Frame - Black (NGFB) Optical Distribution Frame Solution Table of contents Introduction...3 Fiber Main Distribution Frame (FMDF)...4 Frame Accessories...5 Fiber Optic Terminal Jumper Storage
More informationWall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
More informationRack Mount Interconnect Center (RIC3)
Rack Mount Interconnect Center (RIC) The RIC provides the best overall value for exceptional fiber management. The RIC enclosure offers superior fiber density (up to 88 fibers in just U) without sacrificing
More informationPassive Optical Components An Evolant Solutions Product
Description offers a full line of passive optical component products that is specially designed for our complete fiber optic hardware portfolio to allow maximum network flexibility. Available components
More informationWall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
More informationTermination Box MOTB-001
Termination Box MOTB-001 Description: Termination box MOTB-001 is suitable to connect the drop (or pigtails) to the raiser fibers splices. The termination box is for indoor wall mounting. Light weight,
More informationWall Outlet FTTH-001. Description: Features and Benefits: Technical Data
Wall Outlet FTTH-001 Description: Wall outlet FTTH-001 is designed for use in residential and business applications for the termination of up to 2 fibers. It can hold max 2 SC adapters. The unit can be
More informationSection 15 Cable Demarcation Enclosure
Cable Demarcation Enclosure: Section 15 Section 15 Cable Demarcation Enclosure Table of Contents Page Cable Demarcation Enclosure...15-2 Cable Demarcation Enclosure Maximum Protection The enclosure is
More informationFACT OPTICAL DISTRIBUTION FRAME SYSTEM
FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/ Patch and Patch/Patch For almost 30 years, TE Connectivity has led the industry with solutions such as FIST fiber management system,
More informationCloset Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
More informationFIST-GPS2/3. Fiber Management Splice/Patch and Patch/Patch Shelves. Features
FIST-GPS shelves feature the FIST fiber management system and provide a platform for patching and splicing within a rack environment. The shelves house FIST splice and patch trays (FIST-GPST- 12 or FIST-GPSTF-12).
More informationLGX Fiber Distribution System System Reference Guide
LGX Fiber Distribution System System Reference Guide 636-299-120 Issue 6 January 2002 LGX Reference Guide About This Document About This Document Purpose of This Document The purpose of this document is
More informationSiemon PON Fiber Cabling Solutions
Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility
More informationHDX Fiber Distribution Frame
HDX Fiber Distribution Frame A high-density fiber optic frame that prepares the data center for growth, minimizes patching footprint, reduces installation time, and saves you money. HDX FIBER DISTRIBUTION
More informationTrueNet 1U and 2U Fiber Panel Installation and Cable Routing Instructions
TrueNet 1U and 2U Fiber Panel Installation and Cable Routing Instructions ADCP-92-082 Issue 2 10/2008 1U PANEL 2U PANEL 22049-A Content Page INTRODUCTION.............................................................................
More informationC2LINX. Ordering Guide
Ordering Guide Table of Contents Overview... 3 Key Benefits... 3 Panels... 3 Section One: Chassis... 4 Section 3: Trays... 5 Section 4: Modules... 6 a. Patch... 6 b. Patch and Splice... 7 c. Pre-terminated
More informationFTTX Fiber Optic Cabinet Packages Priority Electronics USA
Priority Electronics USA Priority Electronics Ltd Application Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with
More informationRack Mount Cabinet with Fiber Mgmt System, accepts up to 3 Adapter Plates. Rack Mount Cabinet with Fiber Mgmt System, accepts up to 6 Adapter Plates
SEPTEMBER 2009 RACK MOUNT CABINETS Be sure to read and completely understand this procedure before applying product. Be sure to select the proper Optical Cable Corporation product before application. Product
More information400A Fiber Optic Interface Unit Space-Saving Enclosure Provides Easy Access to Connectors, plus Increased Security
400A Fiber Optic Interface Unit Space-Saving Enclosure Provides Easy Access to Connectors, plus Increased Security Applications 400 A1 LIU 400 A2 LIU Because of its security features and flexible design,
More informationPassive Optical LAN guide
Passive Optical LAN guide Optical LAN solution overview CommScope s Optical LAN Solutions (OLS) offer a complete end-to-end cabling solution to support passive optical LAN (POL). POL is the enterprise-level
More informationPlanar Lightwave Circuit (PLC) Splitter, 1x4, 1x8, 1x12 and 1x16 Configurations in PEACOC Flexible Tray
FEATURES: Telcordia GR-1221 Compliant Patented accessibility; easy, fast and accurate Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Excellent Uniformity Low PDL
More informationHIGH DENSITY DATA CENTER CABLING GUIDE. Optics DACs Cables Cable Management Fiber TAPs Media Converters
HIGH DENSITY DATA CENTER CABLING GUIDE Optics DACs Cables Cable Management Fiber TAPs Media Converters PROVIDING MTP CABLING SOLUTIONS FOR THE SMART DATA CENTER. APPROVED NETWORKS SETS THE STANDARD The
More informationCabling Solutions Data Center & Local Area Networks
Cabling Solutions Data Center & Local Area Networks R&M About us. «R&M is a leading provider of cabling solutions for high quality communication networks.» R&M (Reichle & De-Massari AG) has developed and
More informationNG4access Optical Distribution Frame (ODF) Platform. 1st Edition
NG4access Optical Distribution Frame (ODF) Platform 1st Edition Meeting the Challenges of Tomorrow s High Fiber Count Networks Today s data-intensive services are driving the need for ever-increasing network
More informationBUSINESS CLASS SERVICES. COMMERCIAL ACCESS SOLUTIONS Ordering Guide
BUSINESS CLASS SERVICES COMMERCIAL ACCESS SOLUTIONS Ordering Guide POINT - TO - POINT ARCHITECTURE CUSTOMER$$PREMISES COMM$ACCESS$ ROUTER 8ch$&$10ch$CWDM$HiDT mounted$in$a$medium$ust Fiber$Splice$Shelf$5$1RU
More informationARIADROP: Fiber to the MDU (FTTM)
DROP: Fiber to the MDU (FTTM) 05 Issue BECAUSE PERFORMANCE MATTERS DROP: Fiber to the MDU (FTTM) DROP DS-BS- 04/07/05 Overview Technologies DROP System is designed to provide both labor and material savings
More informationBEJED DISTRIBUTION PRODUCTS FAX:
1 BEJED DISTRIBUTION PRODUCTS 503.281.8153 800.232.3533 FAX: 503.281.3339 www.bejed.com Profile BEJED, Inc. s engineering designs have been supporting the telecommunications industry for over 30 years.
More informationCommScope standard density fiber optic panels. High-performance communication solutions
CommScope standard density fiber optic panels High-performance communication solutions For the last 50 years, fiber optic networks have steadily expanded throughout major metropolitan cities and surrounding
More informationOptiSheath Aerial Terminal, SCA-9T Series
Features and Benefits Design includes aerial hanging brackets Easy installation Quick-release clamps Easy terminal re-entry Individual strain-relief Fiber protection and continuity Cable sealing and reusable
More informationTFF Tap Splitter, 1x2 and 2x2 configurations in PEACOC Flexible Tray
FEATURES: RoHS 6/6 Compliant Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Patented accessibility; easy, fast and accurate Flat and Wide Passband Low Polarization
More informationDense Shelf and Passive Module System
Technical Brochure Dense Shelf and Passive Module System An elegant solution to wavelength division multiplexing, splitting, and fiber management. This is one of the most innovative, densest passive solutions
More informationClearview Cassette. Clearview Blue
Application The Clearview Blue provides 12-24 ports of connectivity, scaling one cassette at a time, for patch and splice (Clearfield s in-cassette splicing solution), patch only (stubbed) or plug-and-play
More informationRacks. RS3000 Rack. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended. Prysmian Part Numbers
Racks RS3000 Rack Prysmian Part Numbers: See below The RS3000 Rack is a standard rack with 19 mounting rails, used to accommodate a range of SRS3000 shelves and sub-racks or any other 19 rack mounted products.
More information3M Fiber Distribution Units 8400 Series
Communication Markets Division 3M Fiber Distribution Units 400 Series Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to simplify your cable management
More informationFiber Management Considerations for Optical Components. By: Tom Warren
Fiber Management Considerations for Optical Components By: Tom Warren Fiber Management Considerations for Optical Splitters Fiber is a future proofing technology. The bandwidth capacity of a single fiber
More informationCloset Connector Housings (CCH)
Closet Connector Housings (CCH) Designed based on thousands of hours of customer feedback, Corning closet connector housings (CCHs) offer more than two dozen innovative features that make installation
More informationItems Dimension(WxDxH) Max.Capacity Mounting P-FDB8 181X45X207mm 8 ports & splice Pole/Wall P-FDB16 220x80x300mm 16 ports & splice Pole/Wall
P-FDB General Features Available in 2 sizes, P-FDB8 and P-FDB16 Can accommodate 1x8 / 1X16 PLC splitters and 8 / 16 SC adapters Ultra violet resistant and waterproof Wall and pole mountable 2 inlet ports,
More informationNetSpan FDP Series. Integrated Fiber Distribution Pedestal Solution. Outside Plant for Business-Critical Continuity
NetSpan FDP Series Integrated Fiber Distribution Pedestal Solution Outside Plant for Business-Critical Continuity Features & Benefits Unique internal back-to-back dual compartment configuration (fiber
More informationIntroducing the NG4access ODF Platform
White paper Introducing the NG4access ODF Platform The next-generation optical distribution frame that increases density while reducing cost and installation time in the network The increased demand for
More informationCentrix Platform. Features and Benefits
Features and Benefits Supports 4,320 LC or 2,880 SC ports per frame Saves space through increased port density Available in rear cable acces Designed in compliance with GR-449-CORE, Issue 3 standards Modular
More informationFIBRE ENCLOSURES AND SPLICING ACCESSORIES
F/ F/ Assemblies, 8.0 W W W. S I E M O N. C O M SECTION CONTENTS Rack Mount Interconnect Centre.............. 8. 8. Wall Mount Interconnect Centre...............8. 8.5 F/ Mini Wall Mount Interconnect Centre...............8.5
More informationFTTX Solutions Outdoor FDH PRODUCT CATALOG 2ND EDITION
2015 PRODUCT CATALOG 2ND EDITION CommScope s FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,
More informationOutside Plant. Modular Jointing System MJS-OPGW. Features and Benefits. Prysmian Part Number: See below. Kit Contents. Additional Items.
Modular Jointing System MJS-OPGW Prysmian Part Number: See below The OPGW Modular Jointing System (MJS-OPGW) is a stainless steel joint for use within the external optical fibre network. It is primarily
More informationFiber Cable Assemblies and Accessories
Fiber Cable Assemblies and Accessories Patch Cords, IFC Assemblies, Attenuators, FasTerm Connectors and Adapters 2nd Edition Fiber connectivity solutions Table of Contents Introduction... 1 Patch Cords
More informationInternal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels or cassettes.
JPM427A-R2 1U Pull-Out Fiber Splice Tray Enclosure Internal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels or cassettes. Supports up to three
More informationIxia Flex Tap PASSIVE NETWORK MONITORING HIGHLIGHTS KEY FEATURES. Data Sheet
Ixia Flex Tap Data Sheet PASSIVE NETWORK MONITORING The Ixia Flex Tap provide reliable continuous visibility of 100% of network traffic to support performance and security with no network performance degradation
More informationRacks. IP41 RS3000 Rack RAL7038. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended
IP41 RS3000 Rack RAL7038 Prysmian Part Numbers: See below Features and Benefits The rack can accommodate the range of SRS3000 shelves and sub-racks. Please note that other 19 rack mounted products and
More informationFIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
More informationFIBEROPTIC TERMINATION&CASETTE
FIBEROPTIC TERMINATION&CASETTE TERMINATION SETS EXCLUSIVE SERIES TERMINATION BOXES turksat.com.tr 1U 19 12 W P PORT RAIL MODULE 19 1U 12 PORT SLIDING WITH TELESCOPIC RAIL & PLASTIC MODULE TYPE FEATURES
More informationSection 28 Fiber Optics: Fiber Distribution Cabinets and Accessories
Fiber Optics: Section 28 Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories Table of Contents Page COYOTE Axcess Solutions COYOTE Pre-Terminated Cabinets Wall Mount...28-2 Rack Mount...28-2
More informationPretium EDGE Tap Module Installation and Testing
. General. This procedure describes Pretium EDGE Tap Modules, which are available for both multimode and single mode applications. Compatible with all Pretium EDGE rack-mountable connector housings, TP
More information1U Multi-Function Fibre Enclosure
FEATURES AND SPECIFICATIONS Features and Benefits The is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
More informationIXIA FLEX TAP TM DATA SHEET PASSIVE NETWORK MONITORING KEY FEATURES HIGHLIGHTS
IXIA FLEX TAP TM DATA SHEET PASSIVE NETWORK MONITORING The Ixia Flex Tap provide reliable continuous visibility of 100% of network traffic to support performance and security with no network performance
More informationProduct information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
More informationSplice Distributor. Micro Splice distributor with Telekom - splice cassette. Micro splice distributor for 4 adapters with SC-simplex mounting hole
iber Optic Splice Distributor Micro Splice distributor with Telekom - splice cassette Plastic splice box inclusive accessories: 1 x splice cassette, 1 x splice holder for 12 splices, 2 x grommets, 2 x
More informationA wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
More informationThe Next Data Center Understanding and Preparing for Tomorrow s Technologies WHITE PAPER
The Next Data Center Understanding and Preparing for Tomorrow s Technologies WHITE PAPER The Next Data Center Understanding and Preparing for Tomorrow s Technologies What many in the IT industry thought
More informationMini Wall-mount Building Terminal (WBM)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-516 Issue 2, October 2004 Page 1 of 8 Contents Figure 1 WBM 1. General...1 2. Description...2 3. Precautions...2 4. Tools and Materials...3
More informationOptical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
More informationSPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
More information3M SLiC Fiber Aerial Terminal Closure 530 Internal for Direct Spliced Drop Terminations. 3M External Cable Assembly Module (ECAM) 12mm Drop Entry Kit
3M SLiC Fiber Aerial Terminal Closure 530 Internal Drop Terminations for Direct Spliced Drops The 3M SLiC Fiber Aerial Terminal Closure 530 with Internal Drop Termination is an aerial, strand-mount, free-breathing
More informationRack Mount Enclosures. Fibre Optic Rack Mount Enclosure: SLIDING. Features. Application. Technical Specifications. Asia Pacific EMEA Americas
Rack Mount Enclosures Fibre Optic Rack Mount Enclosure: SLIDING OCC s rack mountable sliding fibre optic enclosures support the use of both indoor and outdoor fibre cable types. Suitable for patching or
More informationFEB 2017 Rev F. Verify that all cable assemblies are in good condition.
EB 2017 Rev MT RJ Test Kits (listed in igure 1) contain the cable assemblies and adapters needed to field test MT RJ optical fiber system attenuation and polarity using optical power meters having either
More informationCompact Series Wallmount Enclosures
Compact Series Page 1 of 5 Overview ARIA s Compact Series are small wallmount enclosures that features patch and splice capabilities. The enclosures also support 12 fiber MPO to LC connector plug and play
More informationNG4access. Optical Distribution Frame (ODF) Platform 2017 PRODUCT CATALOG 2ND EDITION
NG4access Optical Distribution Frame (ODF) Platform 2017 PRODUCT CATALOG 2ND EDITION Meeting the Challenges of Tomorrow s High Fiber Count Networks Today s data-intensive services are driving the need
More informationPHOENIX OPTIX LUMINIX CABLING SYSTEM
PHOENIX OPTIX LUMINIX CABLING SYSTEM High-Performance Fiber-Optic Cabling Using Multifiber MTP for Faster Installation, Higher Rack Densities, and an Easier Transition to 40/100G AEROSPACE, DEFENSE & MARINE
More informationBroadcast and entertainment products
Broadcast and entertainment products Next Generation Frame (NGF) and plug-and-play solutions 2 Contents Next Generation Frame solutions Introduction...4 Fiber Main Distribution Frame (FMDF)...6 Frame accessories
More informationDATA CENTER SOLUTIONS
DATA CENTER SOLUTIONS MTP Cabling Solutions MTP Cassette Solutions MTP Distribution Center Solutions Aqua 10 (OM3) Gigabit Patchcords Tera Flow Single Mode Bend Insensitive Patchcords Fiber Optic Taps
More informationrfi.com.au FIBRE OPTIC ENCLOSURES AND ACCESSORIES
rfi.com.au FIBRE OPTIC ENCLOSURES AND ACCESSORIES Product Catalogue Oct 2018 Rack Mount Enclosures Rack Mount Enclosures: SLIDING OCC s rack mountable sliding fibre optic enclosures support the use of
More informationData Sheet. Customer Distribution and Termination Enclosure OptiBox 4
OptiBox 4 is a fiber optic distribution and termination enclosure, which is used for splicing, patching and to perform with passive optical components. The straightforward mounting box has its main use
More information