Warrior G1SA. Warrior camera is a Professional, High Quality Digital Video Recorder that records in Full HD video by using a simple button operation.

Transcription

1 Quick Start Guide Warrior G1SA Thank you for purchasing the Full HD Warrior sports action camera. The Warrior camera can be mounted with the Bike & Helmet Kit or the Board Kit for the ultimate adventure HD recording experience. Getting to know your Warrior camera Warrior camera is a Professional, High Quality Digital Video Recorder that records in Full HD video by using a simple button operation. It also has the latest Mega Pixel Sensor for you to take great digital photographs. Your camera can capture color video & picture in low illumination (for Warrior G1S only). Your camera has a MicroSD card slot(up to 32GB), which allows you to take video in 1080p@30fps for about 6~12 Hours according to image quality and bit rate. The embedded 3400mAh Lithium-ion Battery can last for 6 Hours, standby for 12 months and be recharged quickly. The Waterproof Housing lets the camera perform up to 5 meters under water. Warrior camera is light than 5.2 ounces or 145g.

2 1. Getting to Know Your Camera

3 1 Main Button Photo/Video/Power 2 LED Indicator 1. Turn the camera on 2. Take single photograph by short-press 3. Take video by long-press Show the camera status Flashing green once: Take a photo Flashing green continuously: Recording video Always green: Camera turn on No light: Camera turn off Flashing blue continuously: WiFi turn on Flashing red continuously after power off: Remote control pending 3 WiFi & Remote Turn WiFi on/off by long-press control Turn remote control on/off by short-press 4 Lens High quality lens 5 USB Port 1. Connect to computer for data transfer 2. Charge your camera 6 SD card slot Insert Micro SD card, up to 32GB 7 LED indicator Camera charging status Red: camera is charging Green: charging finished 8 Reset Button Restore to factory default setting 9 WiFi Antenna Extend WiFi distance 2.Using Your Camera 2.1 Charging up Your Camera Open the back cover, charge your camera with the USB cable and DC 5V/2A or 5V/1A adapter. The red LED lights up to indicate the camera is charging and turns green as soon as the camera has been fully charged. It takes about 5hours to fully charge the camera. 2.2 Power on/off Your Camera Power on: The Warrior camera can startup within 1 second by short-press main button ; If the Warrior camera is already mandatory power off, press main button and WiFi button at the same time to mandatory power on.

4 Power off: The Warrior camera can be automatically power off after 30 seconds if no recording video, you can also mandatory power off by pressing main button and WiFi button at the same time. ( you can setup Auto Power off time by Home7 App, MainMenu->Setting->General Setting) 2.3 Recording Video Long-press the main button resolution and frames is 1080p@30fps. to start / close recording video, default If you want to change video resolution and frames, please follow below steps: 1. Open WiFi and connect to mobile phone 2. Open Home7 App 3. Change the camera resolution(1080p & 720p) in the main menu or frames by slow motion(720p@60fps & 1024*576@120fps) Notes 1. Default video compression is H.264 and video format is mp4. If you want to use H.265 video compression to save 40% more storage space, please go to Home7 App->MainMenu->Setting->Encode Configuration, then the video format will be H.265 and only can be played by H.265 player like VLC. 2. Changing video resolution and compression are disabled during video recording. 3. Default recording mode of the Warrior camera is Stop Recording after memories are fully filled. You can also change it into Loop Recording through Home7 App(MainMenu->Setting->Memory) 2.4 Taking Photos 1. Short-press the main button Notes Change photo resolution and shot mode(single shot, Burst Mode, Time Lapse and Countdown) through main menu of Home7 App.

5 3. Connecting Your Camera 3.1 Connecting Your camera to ios or Android App 1. Open the Warrior camera WiFi,long-press the WiFi button at back. 2. Mobile phone search and connect with WiFi hotspot(default name is xmjp_spt_xxxx) 3. Open Home7 App, then you can see the realtime video. Notes It requires ios 7.4 and Android 4.0 version or above Home7 App ios 3.2 Connecting Your camera to a PC 1. Connect your camera to a PC via the USB cable included. Android 2. Turn on the Warrior camera, make sure WiFi, remote control and recording video are all OFF. 3. Find and Open the "NO NAME" folder. 4. You can see all video files here by date. photo: Photos of Single, Burst,Time lapse and Countdown mode. video: Mp4 video file, which can be played by most of video players. If the camera record in H.265 format, then the video file is H.265 format and only can be played by H.265 player like VLC. xm_video: H.264 video file, only can be played by H.264 player. Notes 1. If you cannot find "NO NAME" folder, unplug the cable from PC and connect the PC again, then turn the camera on. 2. H.265 video compression could save 40% more storage space than H.264, default video compression is H.264, you can select H.265 at Home7 App->MainMenu->Setting->Encode Configuration

6 4. Specification Model Warrior G1SA Sensor 2 Mega Pixel Sony Starlight CMOS sensor Lens 165 ultra wide angle field of view 1080p@30fps Video 720p@60fps 720p@30fps 1024*576@120fps Photo Resolution: 2 Mega Pixel in JPEG format Capture Modes: Single,Burst,Time lapse,countdown Audio Built-in high quality microphone Storage Up to 32GB, Average Recording time: about 12 hours (SD card not included) Connection USB2.0 (for data connection and battery charging) Power Built-in 3400mAh Rechargeable Lithium-ion Battery Battery Life: Approx. 6 hours Housing High quality ABS Waterproof up to 16 feet / 5 meters Dimension 4.53x1.73x1.73 inch Weight 5.2 ounces(145g) *Settings can be changed through Home7 App. FAQ 1. Does this camera record audio? Yes, the camera has microphone on top of the housing. 2. How to live view my camera in mobile phone? Long-press WiFi button at back, then mobile phone search and connect with WiFi hotspot xmjp_spt_xxxx, open Home7 App to live view. 3. How to power off the camera? The camera will automatically power off after 30 seconds(factory default setting), you can also mandatory power off by pressing main button and WiFi button at the same time, in this case, you have to mandatory power on in the same way. 4. How to download photos and videos to my phone and share to Facebook,Twitter,Whatsapp etc First, your mobile phone need to connect with the camera by WiFi, open the photo and share, download the video and press it to share. 5. What s meaning of red LED flashing when recording?

7 Battery has no enough power or Memory card is fully filled. 6. Why the camera s LED is red after power off? Because remote control function is pending, you need to close remote control function through short-pressing WiFi button. 7. How to reset to factory default setting? Pressing reset button at back until hearing a voice. Cautions 1. Do not leave the camera in places where the temperature may rise significantly such as inside a car. This may adversely affect the case or the parts inside. 2. The camera is a precision instrument. Do not drop, strike, or use excessive force when handling the camera. This may cause damage to the camera 3. Before you move the camera, disconnect USB cable. Failure to do this may damage USB cable. 4. This is a sports action video product. Please be careful when using the product, take care not to fall on the camera as this may cause bodily injury. 5. There are no user serviceable parts for the camera: DO NOT DISSASSEMBLE! For repair, please call our customer services team for assistance. 6. Do not place the camera on unstable surfaces. This may cause the camera to fall or tilt over, causing damage.

8 FCC STATEMENT IMPORTANT INFORMATION FCC ID: 2AEP6XM-JPG1-2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

9