IPR712S / IPR712M / IPR722S 4.3/6

Transcription

1 D/N Megapixel HD Infrared IP Camera IPR712S / IPR712M / IPR722S 4.3/6 Instruction Manual

2 IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. GRAPHIC SYMBOL EXPLANATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

3 CAUTION Do not drop or strike this equipment. Sensitive electronics inside are vulnerable to excessive shock. Do not install the equipment near any naked flames or heat sources. Excessive heat could damage this unit. Do not expose this unit to rain or excessive moisture, avoid smoke and dust. Please the camera in an environmental housing for protection. If the camera gets wet, unplug it and have it checked by qualified service personnel. Do not cover cloth or to install this unit in poorly ventilated places. This may lead to overheating. Do not continue to operate if there appears to be fault. If the unit ceases to function, contact qualified service personnel for help. Do not touch the power connection with wet hands. Risk of short circuit or electric shock. Do not damage the power cord or leave it under pressure. Risk of fire or shock circuit.

4 CONGRATULATIONS Thank you for purchasing this D/N Megapixel HD Infrared IP Camera. You now own one of the many fine network products we manufactured. This product has been carefully inspected under rigid quality control and should reach you in perfect condition. With reasonable care, it will provide years of reliable performance. We recommend that you read this installation and operation manual thoroughly before installing and operation your new system. Here you will find all the information you need to set up and use the system. If any questions are not answered in the manual, please contact your dealer. Before proceeding, please read and observe all instructions and warnings contained in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your new camera, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT I NSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.

5 Executive Summary IPR712S(720P)/ IPR712M(1.3MP)/ IPR722S(1080P) series is an D/N Megapixel HD Infrared IP Camera, built-in H.264 AVC (Advanced Video Coding) video compression. H.264 AVC video compression engine supports high definition video quality, 720P (1280x768)/ SXGA(1280x1024)/ 1080P(1920x1080) resolution, bandwidth efficiency with PPPoE and DDNS. Also it provides higher bit rate of internet and diverse alarm functions such as movement video detection or FTP. Moreover, IPR712S / IPR712M/ IPR722S can do remote surveillance with ipad, iphone or Android cell phone. The software R&D engineer can use HTTP protocol(httpapi) or ONVIF protocol to develop related software, and integrate them with existing application software system. D/N Megapixel HD Infrared IP Camera is ideal solution for remote video monitoring via internet.

6 PART DESCRIPTION & DIMENSION IPR712S Unit: mm

7 IPR712M / IPR722S Unit: mm

8 TOP COVER BOTTOM CHASSIS BRACKET PAN ADJUSTMENT SCREW TILT ADJUSTMENT SCREW WINDOW RJ-45 NETWORK CONNECTOR DC POWER INPUT JACK (DC12V ± 10%) SD CARD SLOT (IPR712S Support) This network camera is compliant with SD/SDHC card. RESET KEY To restore the server to factory default setting. NETWORK INDICATOR LEDS Green (LINK): While cable of network is connecting the LED is light. Orange (ACT): When data is communicating, the LED is flashed. INSTALLATION IPR712S 1. Take out the IP camera from the inner box first. Plug the network cable and power cable to RJ-45 network connector and DC power input jack of the IP camera(fig.1). Then fix bracket to the wall(fig.2). DC power input Network cable FIG. 1 FIG. 2

9 2. Installation SD card, please loosen the screws of top cover with screw driver (FIG.3). Put the SD card to SD card slot(fig.4). FIG. 3 FIG Replace the top cover and tighten the screws(fig.5&fig.6). FIG. 5 FIG Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired angle and then tighten the screws(fig.7). FIG. 7

10 IPR712M / IPR722S 1. Take out the IP camera from the inner box first. Loosen the pan adjustment screw with hexagon screw driver. Then, separated the bracket from the camera body (FIG.1). Put the power cable and network cable through the bracket and then fix it to the wall(fig.2&fig.3). FIG.1 FIG.2 FIG.3 2. Open the top cover with screw driver(fig.4). FIG.4

11 3. Next, put the power cable and network cable through the bottom chassis and rubble(fig.5) and then fix the camera body on the bracket(fig.6). FIG.5 FIG.6 4. Assemble the cable with the accessory connector and terminal(fig.7). Plug the power cable to the terminal and plug the network cable to RJ-45 connector of the IP camera(fig.8). RJ-45 Plug 2 Pin Terminal BLACK RED Power cable Network cable FIG.7 FIG.8 10BASE-T or 100BASE-TX Pin Signal BI_DB+ BI_DB- BI_DA+ BI_DA- Pair Color White/ Orange stripe Orange solid White/ Green stripe Blue solid White/ Blue stripe Green Solid White/ Brown stripe Brown Solid Pins on plug face

12 5. Replace the top cover and tighten the screws(fig.9&fig.10). FIG.9 FIG Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired angle and then tighten the screws(fig.11). FIG. 11

13 D/N Megapixel HD Infrared IP Camera IPR712S / IPR712M / IPR722S 4.3/6 Instruction Manual IPD552EX2.2/4.2 N/P PRODUCTION COMPONENTS 1. D/N Megapixel HD Infrared IP Camera 2. Instruction Manual H.264 HD IP Cameras INSTRUCTION MANUAL 3. CD Software Pack 4. Power Adaptor SYSTEM ARCHITECTURES For connecting IPR712S/ IPR712M/ IPR722S to the network, please follow one of the system architectures: (1). Use DC12V power adapter and network switch connected to a network. LAN LAN / Internet Non-PoE Switch HD Infrared IP Camera PC DC12V Adaptor

14 (2). Use with PoE-powered network switch and the PoE splitter connected to a network. LAN LAN LAN / Internet PoE Switch HD Infrared IP Camera PoE Splitter (DC12V) PC EMERGENCY FACTORY DEFAULT Use hardware to restore factory default settings, follow these steps: 1. Hold "RESET" key 10 seconds, then release. 2. After about 40 seconds, the network LED light is off, and then lit. 3. This camera has completed the factory default settings, and then reboot. 4. Use IPScan software search for this IP device. 5. Using a Internet browser open the IP device. 6. Enter the default username "admin" and password "pass" to operate. NOTE For the convenience of users, restore the factory default settings will revert to the default IP address

15 SPECIFICATIONS IPR712S Model No. Focal Length Lens Iris AngleofView Pick Up Element Effective Pixels Chip Size Scanning System Infrared Cut Filter Min. Illumination White Balance Back Light Compensation Electrical Shutter Sense Up IP Rating Window Peak Wavelength Infrared Beam Spread LED Radiant Distance Operating Temperature Dimension Weight Power Input Voltage Power Consumption D/N 720P HD INFRARED IP CAMERA IPR712S mm F (H), 36.8 (V), 63.6 (D) IPR712S6 6mm F1.8 1/4" Progressive scan CMOS sensor 1280(H) x 800(V) = 1,024,000(pixel) 3.88mm(H) x 2.43mm(V) Progressive Scan Auto / Schedule / Day(Color) / Night(Mono) Color: 3Lux at F1.8 / Mono: 0.6Lux at F1.8 / 0 Lux with IR Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 Auto 1/30(25)s ~ 1/20,000s Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames IP66 ψ65 Heat Resistant Glass 850nm 30 16M -10 ~ +50 (14 ~ 122 ) Body: 82mm(W) x 72.5mm(H) x 154mm(D) / Bracket: 101mm(L) 600g DC12V ± 10% 10W Design and specification are subject to change without notice (H), 26.5 (V), 45.7 (D)

16 Video Compression Resolution Multiple profile Frame Rate Video Streaming Video Bitrate Security Users Digital Zoom Motion Detection CPU, Memory Maintenance Network Interface PC Requirement Network Protocols Mobile Phone and PDA Support System Integration CMX Video Display OS SD Card recording D/N 720P HD INFRARED IP CAMERA NETWORK H.264/AVC, Motion JPEG 720P (1280x768) / VGA (640x384) / CIF (320x192) Stream 4 profiles: H.264 at 720P, JPEG at 720P, H.264 at VGA, JPEG at CIF H.264: Up to 20fps at 720P, MJPEG: Up to 10fps at 720P RTSP: RTP/HTTP, RTP/TCP, RTP/UDP 128Kbps ~ 5Mbps Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Yes Events triggered by built-in motion detection Motion triggering recording into SD card Image upload over FTP, by motion detection Embedded SoC ARM9, 500MHz 64MB DDR, 8MB flash memory Firmware update via HTTP, Firmware available at web site 10Mbps / 100Mbps Base-T, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explore 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, ESMTP, NTP, DDNS, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet ipad, iphone and Android support ONVIF Free CMX HD3.2 support LILIN Universal ActiveX Embedded Linux Support SD/SDHC card for circular recording(card is not included) Design and specification are subject to change without notice.

17 IPR712M Model No. Focal Length Lens Iris AngleofView Pick Up Element Effective Pixels Chip Size Scanning System Infrared Cut Filter Min. Illumination White Balance Electrical Shutter Sense Up IP Rating Window Peak Wavelength Infrared Beam Spread LED Radiant Distance Operating Temperature Dimension Weight Power Input Voltage Power Consumption D/N MOS 1.3MP HD INFRARED IP CAMERA IPR712M mm F (H), 49.5 (V), 89 (D) IPR712M6 6mm F1.8 1/3" MOS Image sensor 1280(H) x 1024(V) = 1,310,720(pixel) 4.8mm(H) x 3.84mm(V) Progressive Scan Auto / Schedule / Day(Color) / Night(Mono) Color: 0.5Lux at F1.8 / Mono: 0.1Lux at F1.8 / 0 Lux with IR Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 1/30(25)s ~ 1/10,000s Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames IP66 ψ65 Heat Resistant Glass 850nm 30 21M -10 ~ +50 (14 ~ 122 ) Body: 82mm(W) x 72.5mm(H) x 154mm(D) / Bracket: 101mm(L) 600g DC12V ± 10% 10W Design and specification are subject to change without notice (H), 35.9 (V), 64.5 (D)

18 Video Compression Resolution Frame Rate Video Streaming Video Bitrate Security Users Digital Zoom Motion Detection CPU, Memory Maintenance Network Interface PC Requirement Network Protocols Mobile Phone and PDA Support D/N MOS 1.3MP HD INFRARED IP CAMERA NETWORK H.264/AVC, Motion JPEG SXGA (1280x1024) / VGA (640x480) H.264: Up to 30fps at 1280x1024 MJPEG: Up to 5fps at 640x480 Simultaneous H.264 and Motion JPEG, RTSP 256Kbps~3Mbps, Frame rate and bitrate controllable on-the-fly Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Yes Events triggered by built-in motion detection Image upload over FTP, by motion detection Embedded SoC dual ARM32C, 132MHz 128MB DDR2 memory, 32MB flash memory Firmware update via HTTP, Firmware available at web site 10Mbps / 100Mbps Base-T, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explore 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, ESMTP, NTP, FTP, ARP, DHCP, DNS, RTP, RTSP, RTCP, ONVIF ipad, iphone and Android support System Integration ONVIF CMX Free CMX HD3.2 support Video Display LILIN Universal ActiveX OS Embedded ultron 4.0 Design and specification are subject to change without notice.

19 IPR722S Model No. Focal Length Lens Iris AngleofView Pick Up Element Effective Pixels Chip Size Scanning System Infrared Cut Filter Min. Illumination White Balance Electrical Shutter Sense Up SenseUpPlus Auto Gain Control 3D Noise Reduction 2D WDR Privacy Masking Image Effects IP Rating Window Peak Wavelength Infrared Beam Spread LED Radiant Distance Operating Temperature Dimension Weight Power Input Voltage Power Consumption D/N 1080P HD INFRARED IP CAMERA IPR722S mm F (H), 51 (V), 89 (D) IPR722S6 6mm F1.8 1/2.7" CMOS Image sensor 1920(H) x 1080(V) = 2,073,600(pixel) 5.856mm(H) x 3.276mm(V) Progressive Scan Auto / Schedule / Day(Color) / Night(Mono) Color: 0.6Lux at F1.6 Mono: 0.15Lux at F1.6 / 0 Lux with IR Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 1/30(25)s ~ 1/8,000s Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames Yes 36dB Variable Gain Off/ Low/ Middle/ High Off/ On Off/ On (4 zones) Brightness, Contrast, Hue, Saturation, Sharpness, Mirror, Flip IP66 ψ65 Heat Resistant Glass 850nm 30 21M -10 ~ +50 (14 ~ 122 ) Body: 82mm(W) x 72.5mm(H) x 154mm(D) / Bracket: 101mm(L) 600g DC12V ± 10% 10W Design and specification are subject to change without notice (H), 35.9 (V), 64.5 (D) Color: 0.8Lux at F1.8 Mono: 0.2Lux at F1.8 / 0 Lux with IR

20 D/N 1080P HD INFRARED IP CAMERA NETWORK Video Compression Resolution Profile #1 Profile #2 H.264, Motion JPEG 1080P(1920x1080) / 720P(1280x720) / D1(720x480) / CIF(352x240) H.264 H.264 JPEG H.264 H.264 JPEG Multiple profile Profile #3 Profile #4 H.264 H.264 JPEG H.264 H.264 JPEG Video Streaming Video Bitrate Security Users eptz & Digital Zoom OSD Alarm Functions CPU, Memory Maintenance Network Interface PC Requirement Network Protocols Mobile Phone and PDA Support RTP/HTTP, RTP/TCP, RTP/UDP 128Kbps ~ 5Mbps Frame rate and bit rate controllable on-the-fly VBR/ CBR/ GOP supported Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Yes, ROI is supported Text overlay for date, time, and camera name Image upload over FTP and by face/ tampering/ motion detection Embedded SoC ARM11, 528MHz 256MB DDR2, 256MB flash memory Firmware update via HTTP, Firmware available at web site 10Mbps / 100Mbps Base-T, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explore 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF ipad, iphone and Android support System Integration ONVIF & LILIN HTTP API CMX Free CMX HD3.6 support Video Display LILIN Universal ActiveX & LILIN Java Applet OS Embedded Linux Design and specification are subject to change without notice. 66-IPR712CSE-2

21 MERIT LILIN ENT. CO., LTD 66-IPR712CSE