MicroLab Posts, Bases, and Rails

Size: px
Start display at page:

Download "MicroLab Posts, Bases, and Rails"

Transcription

1 MicroLab Posts, Bases, and Rails Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical component holders because they permit a significant amount of vertical and angular adjustment for coarse alignment, without sacrificing rigidity. Post connectors provide added mounting flexibility with right-angle or adjustable-angle post combinations. Pillars also provide stable structures for mounting optical components. They can be positioned anywhere on an optical table and securely held in place with a clamping fork. A pillar mounting platform can then be added to the top of a pillar, or several pillars can be stacked together. Twenty-millimeter-diameter posts can be used if taller pillars are required. Slotted mounting bases are available for mounting and positioning component holders, post holders, and positioning stages. Versions are available for both ¼-- and M6-threaded tables and breadboards, as well as for M2-threaded breadboards. The base platform of the MicroLab system is either an optical rail or an optical breadboard or table. The components in this chapter allow interfacing with traditional ¼-- and M6-threaded breadboards, as well as M2-threaded miniature breadboards. The most compact optical systems can be built on the M2 breadboards. Both one-sided and four-sided optical rails are available. The traditional one-sided rails can act as a base by themselves, be bolted to a ¼-- or M6-threaded breadboard, or be assembled into twoand three-dimensional structures. Optical components are mounted to optical rail carriers that slide on the rail. The more stable four-sided rails are preferred for building structures. They can be connected end to end, side to side, or side to end. Fixed Optical Mounts MicroLab posts and rails allow stable mounting of optical components

2 Mounting Posts and Accessories Mounting Posts $ 4- and 8-mm-diameter centerless-ground stainless steel $ Flats for better leverage when fastening Posts are available in two standard diameters: 4 mm and 8 mm. They can be joined end to end for greater lengths. The 4-mmdiameter posts have M2 threads, and the 8-mm-diameter posts have M4 threads. All posts are precision ground stainless steel and have flats or T-bar holes for tightening or loosening with a tool. L OEM f8 removable M4 setscrew 1 f4 thru hole threaded M4!8 deep each end 07 RMU Series 2. ASK ABOUT OUR CUSTOM CAPABILITIES L flats f4 M2 threaded B 1 hole threaded M2!4 deep 07 RMT Series Thread Adaptors Thread adaptors can be mounted to posts to change thread types. thread A f2 thru thread B 07 RMT- and 07 RMU-series mounting posts Thread Adaptors Mounting Posts Male Female C PRODUCT Length Thread A Thread B (mm) NUMBER Diameter L B PRODUCT M2 M RAD 07 (mm) (mm) (mm) Thread NUMBER M RAD M2 07 RMT 01 M4 M RAD M2 07 RMT M RAD 09 4 M2 07 RMT M2 07 RMT M2 07 RMT M2 07 RMT 11 8 M4 07 RMU 001 More Posts 8 30 M4 07 RMU 003 Melles Griot also offers 8-mm-diameter posts with 8 40 M4 07 RMU , ¼-, or M6 threads. Go to page 24.4 for these 8 60 M4 07 RMU 007 and larger posts with diameters of 0. inch 12 mm, 8 80 M4 07 RMU 009 and mm. 8 0 M4 07 RMU 011 C 07 RAD-series thread adaptors 6 f Fixed Optical Mounts

3 Fixed Optical Mounts Post Holders and Accessories $ 4- and 8-mm bore diameters $ Threaded or flanged base MicroLab post holders provide a simple method of adjusting the height and angular orientation of 4- and 8-mm-diameter posts. Six different heights are offered for both bore diameters. Post holders are available with either an M4-threaded base or a flanged base. M4-threaded post holders will screw into component positioners and bases. Flanged-base post holders attach to components with the standard hole pattern. A unique feature of the flanged-base post holders is their narrow profile, which allows optical components to be very closely spaced. The height-locking thumbscrew on the flanged-base post holders can be mounted on either side, allowing the most convenient access to the thumbscrew. Post collars are useful for maintaining the height of a post when rotating it in a post holder. They also allow the post to be removed from the post holder and then replaced to the exact same height. Post holders and collars, made of black-anodized aluminum, are sold separately. Post Holders Threaded Post Holders Bore Length Outside Diameter L Diameter PRODUCT fa (mm) (mm) fb (mm) NUMBER PHT PHT PHT PHT PHT PHT PHO PHO PHO PHO PHO PHO 11 Flanged Post Holders fb L 4 fa L 42. for fa = 4 L 4.0 for fa = 8 M4 threaded D D/2 L 2. fa 07 PHT/07 PHO 07 PHF/07 PHG 07 PHT, 07 PHO, 07 PHF and 07 PHG post holders fb 2 holes f2. Bore Length Outside Diameter L Diameter D PRODUCT fa (mm) (mm) fb (mm) (mm) NUMBER PHF PHF PHF PHF PHF PHF PHG PHG PHG PHG PHG PHG

4 Post Collars Pillar Mounting System $ Position components anywhere on a table or breadboard $ Stackable for numerous combinations of heights $ Spacers or risers for optical rails Pillars provide a stable mounting platform that can be positioned anywhere on a table or breadboard surface. They are securely held down with a clamping fork or pillar base clamp. A pillar mounting platform can be added to the top of a pillar to provide a mounting surface for component holders and positioning stages. Fixed Optical Mounts These post collars are used to set post height. 4-mm and 8-mm post collars Post Collars OEM f4 for 07 PHC 0 f8 for 07 PHC 03 For 4-mm Posts 07 PHC 0 For 8-mm Posts 07 PHC 03 ASK ABOUT OUR CUSTOM CAPABILITIES Securing four-sided rails with pillars and clamping forks The pillar mounting system can be used to set up MicroLab components on standard optical tables

5 Fixed Optical Mounts Pillars Pillars are available in six heights: 7., 12.,, 4, 70, and 9 mm. An M6 thread on both ends allows them to be connected together with a setscrew (provided) to achieve numerous heights. The 7.-mm-high pillars are also offered with an M4 thread for mounting post holders. Taller pillars have a cross-drilled hole for better leverage when fastening. Pillars and pillar mounting platforms are made of black-anodized aluminum. Clamping Fork and Hole Adaptors This clamping fork allows pillars to be mounted anywhere on a table or breadboard. It is made from a high-strength aluminum alloy and has a clear-anodized finish. Able to work with both ¼- and M6 screws, the clamping fork is very versatile and easy to use. Hole adaptors may be used to mount the clamping fork to the M2 hole pattern on MicroLab breadboards. R A 2 07 PSP 01/11 07 PSP 03 f12 f 07 PSP-series pillars Pillars 1 hole thread B A 7. 2 f f12 2 holes thread B fd Height A Thread C fd PRODUCT (mm) B (mm) (mm) NUMBER 7. M4 thru 07 PSP M6 thru 07 PSP M6 thru PSP 03.0 M6 thru PSP M6#8 deep PSP M6#8 deep PSP M6#8 deep PSP C PSF 02 pillar clamping fork Clamping Fork and Hole Adaptors Clamping Fork 07 PSF 02 Hole Adaptors (set of 4, includes M2 screws) 07 ACC ACC 01 is shown in the slot of 07 PSF 02 and is used to adapt to MicroLab breadboards. f2.4 thru 1.7 f4!2.4 deep f. f6 07 ACC 01 hole adaptor

6 Pillar Mounting Platform OEM 12 holes threaded M2 07 PSM 01 pillar mounting platform Pillar Mounting Platform Pillar Base Clamp ASK ABOUT OUR CUSTOM CAPABILITIES.8 1 hole threaded M4 M6 threaded Pillar Mounting Platform 07 PSM 01 4 holes f2.4 thru f3.!2.0 deep PSB 01 pillar base clamp Pillar Base Clamp f.3 f Pillar Base Clamp 07 PSB 01 APPLICATION NOTE Post Holders With Pillar-Mount Flexibility Use 07 PSP 01 or 07 PSP 11 pillars to mount post holders in the pillar-mount style. Simply screw the post holder into either of the two pillars. This allows you to position a post holder anywhere on an optical breadboard just like a pillar. Do you need... MALE-MALE THREAD ADAPTORS Use the thread adaptors to attach pillars to bases or component holders with different thread types. Four different thread adaptors available Inch and metric Made from stainless steel For more information, go to page Fixed Optical Mounts

7 Fixed Optical Mounts Post Connectors Right-Angle Post Connector Two posts can be mounted at 90 degrees with respect to one another by using right-angle post connectors. The connectors and posts can be adjusted and then securely locked in position with the two thumbscrews. The connectors are squeezed together, firmly holding the posts in position. Right-angle post connectors are made of brass with a black-chrome finish. f8 38 f8 07 CFG 0 right-angle post connector Right-Angle Post Connector f Right-Angle Post Connector 07 CFG 0 Adjustable-Angle Post Connector These connectors allow two posts to be mounted at any angle with respect to one another. The connectors and posts can be adjusted and then securely locked in position. The post angle is adjustable and can also be locked in position with a thumbscrew. Adjustable-angle post connectors are made of black-anodized aluminum f4 f 7 f4 07 CRG 01 adjustable-angle post connector Adjustable-Angle Post Connector Adjustable-Angle Post Connector 07 CRG f8 Right-angle post connector 07 CRG 01 adjustable-angle post connector 21. 1

8 Adjustable-Angle Swivel Post Connectors Swivel post connectors are a cost-effective way to post-mount components that require both variable position and angle. Component holders can be mounted and then swiveled to achieve optimal alignment. The connectors can be securely held in position on the post by tightening the locking thumbscrew. Once aligned, the swivel ball joint can be locked to maintain the alignment of the component. Swivel connectors for both 4- and 8-mm-diameter posts are available. The swivel post is 4 mm in diameter and has a male M2 thread for attaching component holders, an extension post, or a thread adaptor (go to page 24.6). Adjustable-angle swivel post connectors are made of black-anodized aluminum and stainless steel. OEM E C M2 threaded f4 post 813 swivel fa ASK ABOUT OUR CUSTOM CAPABILITIES B 07 CSG 01/03 adjustable-angle swivel post connectors D 12 Adjustable-Angle Swivel Post Connectors fa B C D E F G PRODUCT (mm) (mm) (mm) (mm) (mm) (mm) (mm) NUMBER CSG CSG F G Adjustable-angle swivel post connectors are ideal for positioning delicate sensor components. Post connectors allow useful mounting configurations Fixed Optical Mounts

9 Fixed Optical Mounts Mounting Bases Double-Slot Mounting Bases There are two double-slot mounting bases, one for M2-threaded breadboards and one for ¼-- or M6-threaded tables and breadboards. Both have the standard hole pattern, including twelve M2 holes and a central M4 hole. This hole pattern can be used for mounting most MicroLab components, including positioning stages, post holders, and component holders. The slotted mounting bases are made of black-anodized aluminum. 1 hole threaded A 2! holes threaded M2 on centers 21 1 hole threaded M holes threaded M2 on centers RPC 23 M6/0 to M2/ mounting base Single-Slot Mounting Base This mounting base allows an M4-threaded post holder or other component to be mounted anywhere on an M2-threaded breadboard. The slot s 11-mm adjustment range allows the base to be positioned anywhere within a circular range of to 21 mm. The single-slotted mounting base is made of black-anodized aluminum. 07 RPC 21 slotted mounting base for M2-threaded surfaces Double-Slot Mounting Bases Mating Surface M2-Threaded Breadboards 07 RPC 21 ¼- or M6-Threaded Tables and Breadboards 07 RPC 23 f8 1 hole threaded M RPC 0 single-slot mounting base Slotted mounting bases on an M2-threaded surface Single-Slot Mounting Base Mating Surface M2-Threaded Breadboards 07 RPC

10 Slotted Mounting Base with Rotation This slotted mounting base, with an integral rotation platform, can be used to position and orient a component anywhere on a ¼-- or M6-threaded table or breadboard. A thumbscrew locks the position of the rotation platform. The platform has the standard hole pattern and includes twelve M2 holes and a central M4 hole. This hole pattern can be used for mounting most MicroLab components. The slotted mounting base with rotation is made of black-anodized aluminum. Slotted Component Holder Bases Two versions of the slotted component holder base are available: one for M2-threaded surfaces and one for ¼-- or M6-threaded surfaces. Both are designed for mounting and rotating MicroLab component holders with a female M4-thread in their base. Spacer plates can be used between the base and the component holder to raise the optical axis. They are attached to the base with an M4 screw inserted from the bottom. Slotted component holder bases are made of black-anodized aluminum. Fixed Optical Mounts 12 holes threaded M2 on centers 1 hole threaded M4 * 7 Slotted mounting bases on an M6-threaded surface OEM f ASK ABOUT OUR CUSTOM CAPABILITIES RPD 01 slotted mounting base with rotation Slotted Mounting Base with Rotation Mating Surface ¼- or M6-Threaded Tables and Breadboards 07 RPD 01 1 hole f4.8 thru f8.3!8 deep far side f 3 holes f2.4 thru 2! MEA 01 slotted component holder bases Slotted Component Holder Bases Mating Surface M2-Threaded Breadboards 07 MEA 01 ¼- or M6-Threaded Tables and Breadboards 07 MEA 03 1 hole f4.8 thru f8.3!8 deep far side 12. f MEA 03 slotted base for M6-threaded surfaces

11 Fixed Optical Mounts 07 MEA 01 and 03 slotted bases Spacer Plates The 2.-, -, and -mm-thick spacer plates can be stacked to raise a component s axis to line up with that of other components. They can also be used to provide a central M4 or M2 thread to conveniently attach a post holder or post. 07 ACB-series spacer plates 1 hole threaded B 8 holes threaded M2 4 holes f2.4 thru f4!c deep 07 ACB-series spacer plates Spacer Plates A Thread C * (mm) B (mm) 2. M ACB 01.0 M ACB 03.0 M ACB 0 A Mounting bases and spacer plates are essential in most applications

12 Miniature Optical Breadboards $ M2-threaded holes on -mm centers $ Clearance holes for tabletop or standoff mounting Standard optical breadboards and tables are appropriate for large components, however miniature optics usually need smaller component holders and much closer spacing and therefore require smaller breadboards. MicroLab component mounts and positioners generally mount with M2 screws. To allow positioning flexibility, our miniature optical breadboards are M2-threaded on -mm centers. Two sizes of breadboards are available: 170#180 mm and 0#30 mm. Both have clearance holes/slots for bolting to or standing off a larger table, and both are made of black-anodized aluminum. Miniature Optical Breadboards Size (mm) Hole Pattern 170#180 M2 on -mm centers 07 BLP 004 0#30 M2 on -mm centers 07 BLP 006 Note: Larger breadboards with ¼-- or M6-threaded holes are available in the optical tables section. Miniature optical breadboards can be used to raise components off of an optical table. OEM ASK ABOUT OUR CUSTOM CAPABILITIES 4 holes f7. thru 12!4 deep 264 holes threaded M2 on centers BLP 004 miniature optical breadboard 4 slots 7. W!21 L thru 12 W!.6 L!4. deep 4 slots W!17. L thru W!22 L!4. deep 4 holes f7. thru f12!4. deep 780 holes threaded M2 on centers BLP 006 miniature optical breadboard Screw Kit for MicroLab Breadboards PRODUCT Kit Contents Quantity NUMBER Pan-Head Phillips Screws 07 AKT 09 M2#4 mm 0 M2# mm 0 M2#6 mm 0 M2# 8 mm 0 Phillips Screwdriver 1 Nylon Tweezers Fixed Optical Mounts

13 Fixed Optical Mounts Optical-Rail Systems $ One- and four-sided optical rails $ A range of rail-carrier lengths $ Connectors for two- and three-dimensional assemblies One-sided optical rails are available in four lengths: 0, 0, 0, and 00 mm. The rails are slotted for bolting to ¼- or M6-threaded surfaces and have an M6-threaded hole in each end for vertical mounting. Four-sided optical rails are strong enough to build three dimensional optical structures. They can be connected together with either optical rail T-connectors or corner connectors (recommended for a more stable structure). The slotted mounting holes and M6-threaded holes on the rails can also be used to bolt two rails together. The length of rail carriers often limits how closely optical components can be spaced. If a four-sided optical rail is mounted on pillars beside a one-sided rail, alternating the mounting of components allows spacing to be much closer together. Optical rail carriers are available in three lengths: 6, 12, and mm. All carriers have an array of M2 holes and a central M4 hole. The underside of the carriers has a low-friction coating for smooth sliding. T-connectors, and vertical mounting bases can be used to build three-dimensional structures. The optical rail system components are made of black-anodized aluminum. One-Sided 19-mm Optical Rails These MicroLab -compatible rails have slots that allow clearance for M6 and ¼- cap screws. To mount to MicroLab breadboards, use the 07 ACC 01 hole adaptors (see pages 21.18, 24.19). $ Straightness: 1.2 mm/m $ Material: aluminum with black-anodized finish slots 7 W!33 L 11 W!37 L!8 deep B A B L 2 holes threaded M6 07 ORM-series one-sided 19-mm optical rails One-Sided 19-mm Optical Rails L A B Number PRODUCT (mm) (mm) (mm) of Slots NUMBER ORM ORM ORM ORM Mounting bases and rail connectors

14 Four-Sided 19-mm Optical Rails Four-sided optical rails are useful in three-dimensional rail structures. Carriers on adjacent sides can pass one another if their locking screws are not on a common corner. $ Straightness: 1.2 mm/m $ Material: aluminum with black-anodized finish Examples of Four-Sided Setups Four-sided rails are ideal for building three-dimensional structures Fixed Optical Mounts 3 OEM 0 slots 7 W!33 L 11 W!37 L!30 deep located 0 apart holes threaded M6 located 0 apart 07 ORL-series four-sided 19-mm optical rails Four-Sided 19-mm Optical Rails ASK ABOUT OUR CUSTOM CAPABILITIES L 3 holes threaded M6!7 deep both ends L Number of PRODUCT (mm) Slots/Holes NUMBER ORL ORL ORL 0 The four-sided rails are used here to create very stable multidimensional setups. The four-sided rail is used with a standard MicroLab rail. The four-sided rail is used to create various photonic tools

15 Fixed Optical Mounts Optical-Rail Carriers for 19-mm Rails Designed for use with MicroLab components, these carriers are available in 6-mm and 12-mm lengths for close spacing of post-mounted components and a -mm length for use with MicroLab stages. A low-friction coating has been applied for smooth motion. 07 OCL OCL 03/ OCL 0/ thread A 4 holes threaded M2 thread A 12 holes threaded M mm optical rail carriers 07 OCL optical-rail carriers Optical-Rail Carriers for 19-mm Rails Carrier Length Thread PRODUCT (mm) A NUMBER 6 M4 07 OCL M4 07 OCL 03 M4 07 OCL 0 12 M6 07 OCL 883 M6 07 OCL 88 Rails can be mounted to MicroLab breadboards using the 07 ACC 01 hole adaptor

16 Vertical Rail-Mounting Base This slotted base provides a stable platform for vertical mounting of four-sided and one-sided optical rails. M6 screws securely attach the end of four-sided rails to the base. The base can then be bolted to a ¼-- or M6-threaded table. Two one-sided optical rails can also be bolted to the central slot. To create a strong vertical structure, 12.-mm-high pillars can be used as spacers between rails. The vertical rail mounting base is made of black-anodized aluminum. Fixed Optical Mounts OEM 2! holes f7. thru f11.!7 deep ORA 09 vertical rail-mounting base Vertical Rail-Mounting Base ASK ABOUT OUR CUSTOM CAPABILITIES Vertical Rail-Mounting Base 07 ORA 09 Vertically mounted rails using the 07 ORA 09 Mounting bases and rail connectors

17 Fixed Optical Mounts Optical-Rail Connectors Both one-sided and four-sided optical rails can be connected in an L or T configuration by using the optical-rail T-connector. Like a rail carrier, one rail can be positioned anywhere up and down the other rail. Four-sided optical rails can be connected together into very strong structures by using the optical-rail corner connector. A single corner connector can be used to connect three rails together or, two corner connectors can be assembled to make a cube, allowing connections on all six sides. Both the rail T-connector and rail corner connector are made of black-anodized aluminum. Optical-Rail Connectors Optical-Rail T-Connector 07 ORA 01 Optical-Rail Corner Connector 07 ORA ORA 01 optical-rail T-connector 18 4 holes threaded M Optical-rail connectors 19 holes f7 thru f11!7 deep 07 ORA 03 optical-rail corner connector

MicroLab Component Holders

MicroLab Component Holders $ Mirror and beamsplitter mounts $ Lens holders $ Optical component cell systems $ Prism/tilt table $ Polarizer holders $ Fiber holders Stable optical component holders are critical for aligning any optical

More information

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT

More information

TubeMount system. Section 11 (pp.53-59) Breadboards and bases. Section 12 (pp.60-62) Stages and rod system. Section 13 (pp.63-70)

TubeMount system. Section 11 (pp.53-59) Breadboards and bases. Section 12 (pp.60-62) Stages and rod system. Section 13 (pp.63-70) OPTOMECHANICS - introduction 5 Optomechanics - introduction There are basically two ways of mounting an optical system enclosed or open. Enclosed systems,such as an ordinary microscope,are light- and dust-tight,rigid,

More information

XSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value

XSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products

More information

Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit

Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.

More information

Translation Stages Triple-Divide Series

Translation Stages Triple-Divide Series USER S GUIDE Translation Stages Triple-Divide Series Models 9064 and 9065 U.S. Patent #6,174,102 5215 Hellyer Ave. San Jose, CA 95138-1001 USA phone: (408) 284 6808 fax: (408) 284 4824 e-mail: contact@newfocus.com

More information

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator

More information

MIRROR POLISHED POSTS See page 46

MIRROR POLISHED POSTS See page 46 PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.

More information

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35] MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page

More information

Web Site: Forums: forums.parallax.com Sales: Technical:

Web Site:   Forums: forums.parallax.com Sales: Technical: Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267

More information

EVOLVE1-M MONITOR ARM

EVOLVE1-M MONITOR ARM EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before

More information

060-Hardware. Clamps and Brackets Hose Clamps

060-Hardware. Clamps and Brackets Hose Clamps Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

More information

7403 K321. Display Wall Mount. Kit Instructions. Issue A

7403 K321. Display Wall Mount. Kit Instructions. Issue A 7403 K321 Display Wall Mount Kit Instructions Issue A ii Revision Record Issue Date Remarks A Nov 2008 First issue 1 Introduction This kit is used in to secure a 7403 Display Head on a vertical surface.

More information

AIR TERMINALS: COPPER

AIR TERMINALS: COPPER AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM

More information

EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM

EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM GAIN 0 Instruction Manual and Experiment Guide for the PASCO scientific Model OS-8537 and OS-8539 02-06575A 3/98 EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM CI-6604A

More information

Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS

Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,

More information

Quick Installation Guide

Quick Installation Guide Full Motion Single Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this

More information

TDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit

TDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart

More information

Sit-Stand Monitor Arm

Sit-Stand Monitor Arm Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment

More information

G12/G12x USER S MANUAL

G12/G12x USER S MANUAL G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5

More information

CLAMPS & SUPPORTS CATALOG

CLAMPS & SUPPORTS CATALOG ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0

More information

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND - YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether

More information

Miniature Push-Pull Series Atto Miniature Push-Pull

Miniature Push-Pull Series Atto Miniature Push-Pull J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,

More information

STEP-BY-STEP INSTRUCTIONS FOR BUILDING AN AUTOCOLLIMATOR. TECHSPEC Optical Cage System

STEP-BY-STEP INSTRUCTIONS FOR BUILDING AN AUTOCOLLIMATOR. TECHSPEC Optical Cage System STEP-BY-STEP INSTRUCTIONS FOR BUILDING AN AUTOCOLLIMATOR TECHSPEC Optical Cage System INTRODUCTION 2 What is an autocollimator? The Autocollimator is a precision instrument composed of an achromatic objective,

More information

Microscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0

Microscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0 Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly

More information

EasyHandling Connection Technology 1.1

EasyHandling Connection Technology 1.1 EasyHandling Connection Technology 1.1 2 EasyHandling Connection Technology 1.1 EasyHandling Connection Technology 1.1 3 Contents 4 Combination options for Grippers 5 Combination options for Rotary Compact

More information

INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16

INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16 INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying

More information

Formulate 20 Vertical Curve

Formulate 20 Vertical Curve Formulate 20 Vertical Curve FMLT-WV20-03 Formulate TM is a collection of sophisticated, ergonomically designed exhibit booths. Formulate combines state-of-the-art zipper pillowcase dye-sublimated fabric

More information

UNISLIDE. UniSlide Positioning System. Manual. Wide Array Of Linear Motion Devices. Rugged, simple, effective, world-wide reknown, low cost

UNISLIDE. UniSlide Positioning System. Manual. Wide Array Of Linear Motion Devices. Rugged, simple, effective, world-wide reknown, low cost UniSlide Positioning System Rugged, simple, effective, world-wide reknown, low cost Manual Wide Array Of Linear Motion Devices UNISLIDE The broadest line of manual positioning assemblies Velmex Versatility

More information

MICROPHONE stands & accessories

MICROPHONE stands & accessories MICROPHONE stands & accessories 03 Microphone Stands & Accessories 300 SERIES MICROLITE MICROPHONE STANDS - Constructed with strong, lightweight Microlite tubular steel - Fast, smooth, non-slip boom swivel

More information

STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER. TECHSPEC Optical Cage System

STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER. TECHSPEC Optical Cage System STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER TECHSPEC Optical Cage System INTRODUCTION 2 What is a Michelson Interferometer? A Michelson Interferometer is a simple interferometric

More information

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52. Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................

More information

xtablet T1600 Vehicle Holder Installation Guide

xtablet T1600 Vehicle Holder Installation Guide This document will step you through setting up the T1600 Vehicle Holder installation and tips for a safe, clean and long lasting installation. Preparing to Mount the Vehicle Holder Warning : Dock mounting

More information

WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp

WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated

More information

Further Information can be found at

Further Information can be found at Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of

More information

MPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage

MPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to mm Precision ground ball-screw or lead-screw drive DC servo or stepper motor Crossed-roller bearings High resolution

More information

ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT

ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK

More information

Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate

Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting

More information

Instructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only)

Instructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only) Instructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only) **TURN POWER OFF OF MACHINE BEFORE INSTALLATION** READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION Retrofit Kit Contents PART NAME

More information

BPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

BPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. BPL SERIES INSTALLATION INSTRUCTIONS Important Warning THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This product must be installed in accordance with National Electrical

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing

More information

Installation Guide Roll Stand Kit for Philips Avalon FM20/30

Installation Guide Roll Stand Kit for Philips Avalon FM20/30 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Roll Stand Kit for Philips Avalon FM20/30 The purpose of this guide is to: 1. Describe attachment

More information

IS-DM220/IR/HB IS-DM220

IS-DM220/IR/HB IS-DM220 IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and

More information

Universal Desktop and Monitor Stand

Universal Desktop and Monitor Stand Universal Desktop and Monitor Stand Installation Instructions Kit P/N: 114-6013 Kit Contents Kit Contents: (1) Stand Assembly (1) VESA Monitor Bracket (1) Bottom Bracket (1) Top Bracket (1) Clamp Bracket

More information

Standard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400

Standard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400 Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand

More information

Terminals, Lugs, and Fasteners

Terminals, Lugs, and Fasteners Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying

More information

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858) KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,

More information

Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series)

Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series) Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series) Instruction Manual Images may be different from actual product Disclaimer It is Dyconn s intention to have all the correct

More information

Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays

Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40 - 55 flat Panel Displays Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"

More information

GbX Backplane and Daughtercard Tooling. *GbX is a Trademark of Teradyne Inc.

GbX Backplane and Daughtercard Tooling. *GbX is a Trademark of Teradyne Inc. GbX BACKPLANE and DAUGHTERCARD INSTALLATION TOOLING For GbX Connector Series 75220 and 75360 (4 Pair and 5 Pair Daughtercard assemblies) 75292 (Daughtercard Power) 75235 and 75237 (4 Pair and 5 Pair Backplane

More information

APC Open Frame Rack Networking Solutions

APC Open Frame Rack Networking Solutions APC Open Frame Rack Networking Solutions NetShelter 2- and 4 Post Open Frame Racks The NetShelter 2 and 4 Post Open Frame Racks offer a quality solution for the economical installation of rackmountable

More information

A-dec 584 Monitor Mount on a Central Cabinet

A-dec 584 Monitor Mount on a Central Cabinet Installation Guide A-dec 584 Monitor Mount on a Central Cabinet Before You Begin This procedure applies to the A-dec Inspire TM 592 Central Console and the standard and tall Preference cabinet central

More information

3500 Series Tripod Kit

3500 Series Tripod Kit 3500 Series Tripod Kit You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! This versatile and durable Oben tripod and ballhead is a compact and lightweight kit that sets up quickly, folds

More information

A-dec 586 Ceiling Monitor Mount

A-dec 586 Ceiling Monitor Mount Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with

More information

HQuad500 Frame Assembly Guide

HQuad500 Frame Assembly Guide HQuad500 Frame Assembly Guide V1.0 June 2015 1 What s Included Kit Content Hardware Bag Content 2 HQuad500 Assembly 2.1 Arm & Motor Mount Sub Assembly 2.2 Landing Gear Step 1 2.3 Center Plates Sub Assembly

More information

Specification. Width - 190mm Length - 230mm Thickness - 8mm Assembled height - 78mm Weight - 805g Table material - AL5052 Screw material - SS304

Specification. Width - 190mm Length - 230mm Thickness - 8mm Assembled height - 78mm Weight - 805g Table material - AL5052 Screw material - SS304 Specification Width - 190mm Length - 230mm Thickness - 8mm Assembled height - 78mm Weight - 805g Table material - AL5052 Screw material - SS304 Motherboard support - Mini ITX Drive support - Up to 2 x

More information

In-Sight 7000 Series Vision System. Optional Configurations

In-Sight 7000 Series Vision System. Optional Configurations In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms

More information

Raven Adapter Harness

Raven Adapter Harness Note: Indented items indicate parts included in an assembly listed above Quantity by System Part Name/Description Part Number With Switch Box With Built-in Switches Raven Harness Adapter Kit 4100504 1

More information

DUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors

DUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors LeviTouch DM-502 DUAL-ARM MONITOR MOUNT For 15 27 in. (38.1 68.6 cm) desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor Dual-Arm Desktop Mount can securely support two monitors

More information

Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.

Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions. Spec-00560 Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 INDUSTRY STANDARDS Maintains NEMA Type 2 and IEC IP55 enclosure rating when properly installed per

More information

T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts

T-Nuts St. Industrial Profile Systems Fasteners.  Technical Data. Application. Ordering Information. Catalog /US T-Nuts atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements

More information

BC Series. Dual Action Ballhead. You re on steady ground

BC Series. Dual Action Ballhead. You re on steady ground BC Series Dual Action Ballhead You re on steady ground 1 Introduction Thank You for choosing Oben! This sturdy Oben BC Series Dual-Action ballhead provides smooth, precise operation. Two locks provide

More information

What do you want to build today?

What do you want to build today? RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. What do you want to build today? T - S L O T T E D A L U M I N U M E X T R U S I O N S V.3

More information

Installation Guide GE Healthcare Solar 8000M Keypad Mounting Kit for 15'' and 18'' Flat Panel Displays

Installation Guide GE Healthcare Solar 8000M Keypad Mounting Kit for 15'' and 18'' Flat Panel Displays Installation Guide GE Healthcare Solar 8000M Keypad Mounting Kit for 15'' and 18'' Flat Panel Displays The purpose of this guide is to: 1. Describe attachment of Keypad to Keypad Mounting Bracket (page

More information

Pandora Assembly Instructions With Diamond Systems PC/104 CPUs (Athena, Elektra and Prometheus) November, 2006

Pandora Assembly Instructions With Diamond Systems PC/104 CPUs (Athena, Elektra and Prometheus) November, 2006 Pandora Assembly Instructions With Diamond Systems PC/104 CPUs (Athena, Elektra and Prometheus) November, 2006 Diamond Systems Corp. (650) 810-2500 www.diamondsystems.com This document describes how to

More information

T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable

T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow

More information

Formulate Designer Series 20 Backwall - Kit 11

Formulate Designer Series 20 Backwall - Kit 11 Formulate Designer Series 20 Backwall - Kit 11 FMLT-DS-20-11 Formulate Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame

More information

Oct 16 Rev D

Oct 16 Rev D Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters

More information

Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,

Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone , Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module

More information

Sockets & Accessories

Sockets & Accessories Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry

More information

Organisational Kitchen Fittings Drawer and Front Extensions

Organisational Kitchen Fittings Drawer and Front Extensions GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism

More information

Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.

Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench. IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [

More information

Mounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.

Mounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions. 763.422.2600 Spec-00560 F763.422.22 Mounting Options SYSPEND 28-MAX Suspension System Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 TM INDUSTRY STANDARDS Maintains

More information

Specification. Radiamatic Detectors and Accessories

Specification. Radiamatic Detectors and Accessories 4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with

More information

Part Name/Description Part Number Quantity

Part Name/Description Part Number Quantity Part Name/Description Part Number Quantity Direct Command Kit 4100883 1 Installation Instructions 2006336 1 Hardware Kit Large Module 2001354-1 2 Cable Installation Kit 2000901-1 1 Quick Reference Card

More information

Ideal protection for your electrics: häwa cable ducts

Ideal protection for your electrics: häwa cable ducts Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in

More information

Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual

Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual For Illustration- Blue Ray Double Tray with Housing 1 The Fantasea Blue Ray Tray allows integrating different components in an underwater

More information

FLEXBOX. Installation Guide

FLEXBOX. Installation Guide FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE

More information

TDM To MiniMech conversion ProceDure

TDM To MiniMech conversion ProceDure TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT

More information

POLE DISPLAY SOLUTIONS & ACCESSORIES

POLE DISPLAY SOLUTIONS & ACCESSORIES & ACCESSORIES Pole Display Solutions Litho poles and bases are an excellent and versatile way to highlight a message. Pole dimensions are in lengths from two to six feet and 1 to 1-3/4 inch diameters.

More information

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447 Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake

More information

V40 Videoboom MAIN OPERATING INSTRUCTIONS INDEX 5. SPECIFICATIONS V40 1. INTRODUCTION 2. LIST OF FUNCTIONS AND PARTS

V40 Videoboom MAIN OPERATING INSTRUCTIONS INDEX 5. SPECIFICATIONS V40 1. INTRODUCTION 2. LIST OF FUNCTIONS AND PARTS MAIN OPERATING INSTRUCTIONS V40 Videoboom INDEX 1. INTRODUCTION 2. LIST OF FUNCTIONS AND PARTS 3. INSTRUCTIONS V40 3.1 ASSEMBLY & SETTING UP 3.2 WEIGHT SYSTEM 3.3 MOUNTING THE VIDEO CAMERA 4. USING THE

More information

ReachFree ID Installation Instructions for Wash Select II. Unitec

ReachFree ID Installation Instructions for Wash Select II. Unitec ReachFree ID Installation Instructions for Wash Select II Unitec www.startwithunitec.com Proprietary Information and Materials of Unitec Inc. Such proprietary information and materials may not be disclosed

More information

spring-action clamps and interlocking fixture plates An order placed today will improve productivity and profits immediately!

spring-action clamps and interlocking fixture plates An order placed today will improve productivity and profits immediately! PRICES AND PARTS SUBJECT TO CHANGE. PRICING In U.S. Currency. Loc-N-Load spring-action clamps and interlocking fixture plates CMM and Vision Inspections Featuring: Cross-Bow Silver-Bullet D-Block Simple-Stop

More information

Titan Media Cart. Installation and Operation Manual

Titan Media Cart. Installation and Operation Manual Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE

More information

HERCULES. Durability and reliability... our highest engineering priorities

HERCULES. Durability and reliability... our highest engineering priorities HERCULES s e r i e s Durability and reliability... our highest engineering priorities Tripods and Pedestal QuickSet s six decades of experience in the design, manufacturing and maintenance of support equipment

More information

SYSTEM WORLD PRODUCT INFO

SYSTEM WORLD PRODUCT INFO SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black

More information

CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION

CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment

More information

Mounting Accessory Guide

Mounting Accessory Guide Apr. 12 2010 Table of Contents Mounting Accessory Guide 1 Overview 5 Introduction... 5 Types of Mounting Methods... 5 Surface... 5 Wall... 5 L-Type Wall Mount (PMAX-0308) 6 Heavy Duty Wall Mounts (PMAX-0305

More information

Floor Standing Pedestal

Floor Standing Pedestal 2336 K052 Floor Standing Pedestal Kit Instructions Issue C Revision Record Issue Date Remarks A Feb 20021 First issue B June 2007 Added pedestal floor bolting procedure C Mar 2011 Added Universal Mounting

More information

PROLINE ExtERNaL COmPONENts 0-mm solid BasE Catalog Number Fits Frame B x C W (mm) W (in.) D (mm) D (in.) PB045 PB046 PB064 PB064HF2 PB065HF2 PB066

PROLINE ExtERNaL COmPONENts 0-mm solid BasE Catalog Number Fits Frame B x C W (mm) W (in.) D (mm) D (in.) PB045 PB046 PB064 PB064HF2 PB065HF2 PB066 Spec-00429 PROLINE External Components PROLINE Tops and Bases 0-mm Solid Base The 0-mm bases are finished with RAL 7035 textured light-gray polyester powder paint (except stainless steel). EMC bases are

More information

Part Name/Description Part Number Quantity

Part Name/Description Part Number Quantity Part Name/Description Part Number Quantity Direct Command 4200159 1 Cable Installation Kit 2000901-1 1 Hood 37-pin DSub 2001808-37 2 Dielectric Grease 2002872 1 Dust Plug 12 Pin Gray 2002899-12N 1 Feature

More information

Tutorial: Using SolidWorks to assemble an off-the-shelf lens system

Tutorial: Using SolidWorks to assemble an off-the-shelf lens system Tutorial: Using SolidWorks to assemble an off-the-shelf lens system Jennifer Harwell College of Optical Sciences, University of Arizona November 29, 2010 Introduction When designing an optical system,

More information

AVT Model Tripod.

AVT Model Tripod. AVT Model Tripod www.ravelliphoto.com Product Overview: The Ravelli AVT professional tripod is a high performance, fluid drag tripod that provides smooth continuous drag control and operates on both pan

More information

Laboratory Clamps and Supports

Laboratory Clamps and Supports Laboratory Clamps and Supports Benchclamps 2 Laboratory Clamps Multi-Purpose Benchclamp Heavy-Duty Clamps grip adjustment range Single or dual adjust Available in three sizes; small, medium, and large

More information

TRANSFORM KIT for 24 x 24 mm Phoenix Camera. TRANSFORM KIT for 24 x 24 mm Phoenix Camera

TRANSFORM KIT for 24 x 24 mm Phoenix Camera. TRANSFORM KIT for 24 x 24 mm Phoenix Camera Phoenix S-mount, ix Connector Phoenix C-mount, RJ45 Phoenix NF-mount, RJ45 TRANSFORM KIT LUCID s Phoenix GigE Vision camera has a unique transformable design that can be easily configured to meet a wide

More information

SSD Dual Drive Installation

SSD Dual Drive Installation SSD Dual Drive Installation Replace the optical drive in your imac Intel 21.5". Written By: Dozuki System 2017 guides.crucial.com Page 1 of 18 INTRODUCTION imac won't read disks? Use this guide to replace

More information

Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series

Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series Note: Indented items indicate parts included in an assembly listed above. Part Name / Description Part Number Quantity Direct Command Spra-Coupe 7000 Kit 4100531 1 Liquid Product Control Module 4000394

More information

Dynamic Perception Stage Zero Dolly Owners Manual

Dynamic Perception Stage Zero Dolly Owners Manual matthias a. uhlig Dynamic Perception Stage Zero Dolly Owners Manual camera obscura verlag matthias a. uhlig Matthias A. Uhlig Dynamic Perception Stage Zero Dolly Owners Manual Waschow: Camera Obscura Verlag,

More information