Cable entry plate KDP Plastic, rectangular
|
|
- Evangeline Montgomery
- 5 years ago
- Views:
Transcription
1 Cable entry plate KDP Plastic, rectangular 87
2 Cable entry plate KDP Plastic, rectangular Advantages Straight in! 22 cables installed in approx. 2 minutes! 10 times faster and with a simultaneous space saving of up to 50 % compared with conventional cable fittings. Take advantage of these huge potential savings. The plastic KDP is simply clicked into the cut-outs for connectors and the cable is then pushed through - and the cable insertion is already done! The cable entry plate is an entry and fastening system for electric conduits and pneumatic hoses such as those used in control cabinet, plant or machine construction. Wherever quick assembly is required with high packing density and cables must be protected, the cable insertion system is used. Enormous time savings in assembly Extremely low space requirement High packing density Assembly without tools High protection class No kinks in cables and tubes 88
3 Overview Page 96 Page 98 Page 98 Page 99 Page 105 Page 106 Cable entry plate Type KDP 24 Cable entry plate for cut-outs for 24-pole connectors e.g. Harting or Wieland. For clip action fastening or screwing in place. Blanking plate Type BP/N Polyamide blanking plates for sealing cut-outs for 24-pole connectors, e.g. Harting or Wieland. Can be screwed and snapped in. Blanking plate Type BP/H Blanking plate, snap-in, made of thermoplastic elastomer. For sealing cut-outs for 24-pole connectors e.g. Harting or Wieland. Adapter plate Type KDP 24/AP/RI Adapter plate with cut-outs for 24-pole connectors. Fit in Rittal enclosures. Adapter plate Type KDP 24/AP/EN Adapter plate with cut-outs for 24-pole connectors. Fit in Ensto enclosures. Adapter plate Type KDP 24/AP/LO Adapter plate with cut-outs for 24-pole connectors. Fit in Lohmeier enclosures. 89
4 Cable entry plate KDP Plastic, rectangular Selection table Type Cable diameter in inch KDP 24/11 KDP 24/12 KDP 24/14 KDP 24/17 KDP 24/22 KDP 24/23 KDP 24/ Total count Openings
5 Selection table/rittal enclosures Adapter plates suitable for Rittal enclosures with cut-outs for 24-pin connectors Rittal housing KDP 24/AP/RI- AE/4 KDP 24/AP/RI- AE/6+2 KDP 24/AP/RI- AE/2 KDP 24/AP/RI- KL/1 KDP 24/AP/RI- BG/2 KDP 24/AP/RI- BG/3+4 Number Type AE - - X AE - - X AE - - X AE - X AE X AE X AE X AE - X AE - X AE - X IN - X AE - X AE - X AE - X AE X AE X AE X AE X AE - X AE X AE - X AE - X AE X AE - X AE X AE - X AE - X AE - - X KL X KL X KL X KL X KL X KL X KL X KL X KL X KL X KL X KL X KL X - - X can be directly fitted into the casing - cannot be combined 91
6 Cable entry plate KDP Plastic, rectangular Selection table/rittal enclosures Adapter plates suitable for Rittal enclosures with cut-outs for 24-pin connectors Rittal enclosure KDP 24/AP/RI- AE/4 KDP 24/AP/RI- AE/6+2 KDP 24/AP/RI- AE/2 KDP 24/AP/RI- KL/1 KDP 24/AP/RI- BG/2 KDP 24/AP/RI- BG/3+4 Number Type BG X BG X EL - X EL - X EL - X xx0 CP X xx0 CP X xxx IW X xxx IW X DK - X DK - X DK - X DK - X xxx DK X DK - X DK - X DK - X DK - X SV - - X SV X SV - X SV - X SV - X SV X CS X CS X CS X CS X CS X CS X CS X X CS X X CS X CS X CS X CS X CS X CS X CS X CS X CS X CS X X can be directly fitted into the casing - cannot be combined 92
7 Selection table/ Ensto und Lohmeier enclosures Adapter plate suitable for Ensto enclosures with cut-outs for 24-pin connectors ENSTO enclosure KDP 24/AP/EN-KG/1 Number Type FFUF153012G Cubo F X FFUF203012G Cubo F X FFUF204012G Cubo F X FFUF205012G Cubo F X FFUF206012G Cubo F X FFUF208012G Cubo F X FFUF Cubo F X FFUF303012G Cubo F X FFUF304012G Cubo F X FFUF305012G Cubo F X FFUF306012G Cubo F X FFUF404012G Cubo F X FFUF406012G Cubo F X FFUF408012G Cubo F X FFUF Cubo F X FFUF Cubo F X FFUF Cubo F X Adapter plate fits in Lohmeier enclosure with cut-outs for 24-pin connectors Lohmeier enclosure KDP 24/AP/LO-BG/1 KDP 24/AP/LO-BG/2 Number Type BG F-200 X - BG F X BG F X BG F-200 X - BG F-200 X - BG F-200 F-300 X X BG F X BG F X X can be directly fitted into the enclosure - cannot be combined 93
8 Material data Type Material Temperature Min. Max. Fire classification UL 94 RoHS Compliant IP protection class Approvals UR Approval for railroad use DB SNCF BS Halogen-free Phosphorous-free Cadmium-free Asbestos-free Lead-free Silicone-free KDP 24/x Enclosure: Polyamide Seal: TPU/NBR/EPDM -22 F +158 F VO IP65 vc KDP 24/AP/RI Stainless steel (V2A) KDP 24/AP/EN Stainless steel (V2A) KDP 24/AP/LO Stainless steel (V2A) ** = not certified 94
9 Material data Type Material Temperature Min. Max. Fire classification UL 94 RoHS Compliant IP protection class Approvals UR Approval for railroad use DB SNCF BS Halogen-free Phosphorous-free Cadmium-free Asbestos-free Lead-free Silicone-free BP/N Polyamide, TPU -40 F 257 F VO IP65 vc BP/H TPE -40 F 140 F HB IP42 vc ** = not certified 95
10 Cable entry plate KDP Plastic, rectangular Cable entry plate plastic type KDP 24/ to +158 F Enclosure: Polyamide Seal: TPU/NBR/EPDM V0 IP 65 Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic conduits in confined spaces is essential. The alternative to cable fittings. Suitable for standard cutouts for 24-pin Harting and Wieland connectors. For snap-in fastening and/or screwing in place. Snap-in action at plate thicknesses of 0.06 to 0.08 inch 2.55 (65) 2.55 (65) 2.28 (58) 0.63 (16) 0.63 (16) Ø 0.22 (5,5) 1.42 (36) 5.74 (146) 4.40 (112) KDP 24 Type Order no. Color Openings Openings Installation height Pack Total Quantity / Ø inch qty KDP 24/ black 11 4 / inch / inch 3 / inch KDP 24/ black / inch KDP 24/ black 14 6 / inch / inch 4 / inch KDP 24/ black / inch Other variants on request. Ask your Murrplastik team. Matching label plate (See ACS catalogue): Type KSS 20 x 9 or KSS 10 x 8 The right tool for cut-out production can be found in the chapter «Punching tools» 96
11 Cable entry plate plastic type KDP 24/ to +158 F Enclosure: Polyamide Seal: TPU/NBR/EPDM V0 IP 65 Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic conduits in confined spaces is essential. The alternative to cable fittings. Suitable for standard cutouts for 24-pin Harting and Wieland connectors. For snap-in fastening and/or screwing in place. Snap-in action at plate thicknesses of 0.06 to 0.08 inch 2.55 (65) 2.55 (65) 2.28 (58) 0.63 (16) 0.63 (16) Ø 0.22 (5,5) 1.42 (36) 5.74 (146) 4.40 (112) KDP 24 Type Order no. Color Openings Openings Installation height Pack Total Quantity / Ø inch qty KDP 24/ black / inch / inch 2 / inch KDP 24/ black / inch KDP 24/ black / inch Other variants on request. Ask your Murrplastik team. Matching label plate (See ACS catalogue): Type KSS 20 x 9 or KSS 10 x 8 The right tool for cut-out production can be found in the chapter «Punching tools» 97
12 Cable entry plate KDP Plastic, rectangular Blanking plate Type BP/N and BP/H BP/N: -40 to 257 F BP/H: -40 to 140 F BP/N: Polyamide, TPU BP/H: TPE BP/N: V0 BP/H: HB BP/N: IP 65 BP/H: IP 42 The BP/N and BP/H blanking plates are suitable for closing cut-outs for 24-pole connectors. Unused cut-outs in areas like control cabinets or a KDP 24 AP/xx adapter plate can be closed off simply with the blanking plate. Integrated seal Snap-in action at plate thicknesses from 0.06 to 0.08 inch Alternative to screwing on (BP/N only) 2.56 (65) 2.56 (65) 0.63 (16) 0.63 (16) Ø 0.22 (5.5) 1.42 (36) 4.41 (112) BP/N BP/H Type Order no. Color Dimension Pack inch qty L x W x H BP/N black 5.75 x 2.28 x BP/H 24 * black 5.75 x 1.89 x * not DB approved 98
13 Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (149) 2.61 (66.5) 5.23 (133) 2.61 (66.5) 4.72 (120) 4.72 (120) Ø 0.19 R (5.0) (R 13) (57.5) 4.52 (115) 2.26 (57.5) (339) 5.96 (151.5) (303) 5.96 (151.5) KDP 24/AP/RI-AE/4 Type Order no. Color Location spaces Pack qty KDP 24/AP/RI-AE/ smoothed 4 1 Corresponds to Rittal flange plate size 4 Adapter plate matches Rittal compact control cabinet type AE ; ; ; ; ; ; ; ; ; Rittal module enclosure, compact enclosure, Toptec type CS ; ; ; ; ; ; ; ; ; Rittal wall-mounted distributor type SV ;
14 Cable entry plate KDP Plastic, rectangular Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the prefabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (534) 5.86 (149) 2.61 (66.5) 2.61 (66.5) 4.33 (110) 9.84 (250) 4.33 (110) (500) 4.33 (110) 4.33 (110) Ø 0.19 R 0.51 (5.0) (R 13) 9.84 (250) 2.26 (57.5) 2.26 (57.5) KDP 24/AP/RI-AE/6+2 Type Order no. Color Location spaces Holes Pack qty KDP 24/AP/RI-AE/ smoothed 6 2 x 1.27 inch 1 Corresponds to Rittal flange plate size 5 Adapter plate matches Rittal compact control cabinet type AE ; ; ; ; ; ; ; ; ; ; ; ; Rittal wall-mounted enclosure type EL ; ; Rittal wall-mounted enclosure / distributor type DK ; ; ; ; ; ; ; Rittal module enclosure, compact enclosure, Toptec type CS ; Rittal empty enclosure for industrial distributor type IN Rittal wall-mounted distributor type SV ; ;
15 Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (330) 3.54 (90) 1.47 (37.5) 1.47 (37.5) 6.18 (157) 4.72 (120) Ø 0.19 (5) (304) 6.18 (157) 4.72 (120) R 0.35 (R 9) 2.51 (64) KDP 24/AP/RI-AE/2 Type Order no. Color Location spaces Pack qty KDP 24/AP/RI-AE/ smoothed 2 1 Corresponds to Rittal flange plate size 3 Adapter plate matches Rittal compact control cabinet type AE ; ; ; Rittal wall-mounted distributor type SV
16 Cable entry plate KDP Plastic, rectangular Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (90) 1.41 (36) 1.41 (36) 3.97 (101) 1.49 (38) 1.49 (38) 3.97 (101) Ø 0.17 R 0.27 (4.5) (R 7) 2.44 (62) 8.70 (221) 7.55 (192) KDP 24/AP/RI-KL/1 Type Order no. Color Location spaces Pack qty KDP 24/AP/RI-KL/ smoothed 1 1 Corresponds to Rittal flange plate size 4 Adapter plate matches Rittal terminal boxes type KL ; ; ; ; ; ; ; ; ; ; ; ; Rittal Pillar type CS 6214.xx0; 6220.xx0 Rittal enclosure / under-desk enclosure / printer cabinet / worktop feet type IW 6900.xxx; 6901.xxx Rittal wall-mounted enclosure type DK 7454.xxx 102
17 Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (355) 3.62 (92) 1.45 (37) 1.45 (37) 6.63 (168.5) (56.5) (56.5) Ø 0.17 (4.5) (327) 6.63 (168.5) R 0.11 (R 3) 2.51 (64) KDP 24/AP/RI-BG/2 Type Order no. Color Location spaces Pack qty KDP 24/AP/RI-BG/ smoothed 2 1 Adapter plate matches Rittal bus enclosure type BG
18 Cable entry plate KDP Plastic, rectangular Adapter plate, type KDP 24/AP/RI Stainless steel (V2A) The KDP 24/AP/RI adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (555) 3.62 (92) 1.45 (37) 1.45 (37) (268.5) 6.39 (162.5) 2.22 (56.5) (56.5) 2.22 Ø 0.17 (4.5) (527) (268.5) 6.39 (162.5) R 0.17 (R 4.5) 2.51 (64) KDP 24/AP/RI-BG/3+4 Type Order no. Color Location spaces Holes Pack qty KDP 24/AP/RI-BG/ smoothed 3 2 x 0.80 inch / 2 x 1.00 inch 1 Adapter plate matches Rittal bus enclosure type BG
19 Adapter plate, type KDP 24/AP/EN Stainless steel (V2A) The KDP 24/AP/EN adapter plate can be directly mounted into the pre-fabricated cut-outs from RITTAL enclosures. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (101) 3.97 (101) 3.34 (85) 1.41 (36) 1.41 (36) Ø 0.17 (4.5) R 0.27 (R 7) 2.44 (62) 8.46 (215) 7.55 (192) KDP 24/AP/EN-KG/1 Type Order no. Color Location spaces Pack qty KDP 24/AP/EN-KG/ smoothed 1 1 Adapter plate matches Ensto terminal enclosure Cubo type FFUF G; G; 20412G; G; G; G; G; G; G; G; G; G; G; ; ; ;
20 Cable entry plate KDP Plastic, rectangular Adapter plate, type KDP 24/AP/LO Stainless steel (V2A) The KDP 24/AP/LO adapter plate can be directly mounted into the pre-fabricated cut-outs from Lohmeier casings. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate come with seal included. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (294) 3.62 (92) 1.35 (34.5) 1.35 (34.5) 5.45 (138.5) 5.29 (134.5) 0.62 (16) 0.62 (16) Ø 0.21 (5.5) 0.59 (15) 9.99 (254) (270) 5.45 (138.5) 5.29 (134.5) R 0.29 (R 7.5) (76) (54) KDP 24/AP/LO-BG/2 Type Order no. Color Location spaces Pack qty KDP 24/AP/LO-BG/ smoothed 2 1 Adapter plate matches Lohmeier bus enclosure F300 type BG ; ; ; ;
21 Adapter plate, type KDP 24/AP/LO Stainless steel (V2A) The KDP 24/AP/LO adapter plate can be directly mounted into the pre-fabricated cut-outs from Lohmeier casings. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for grounding the adapter plate. Adapter plate come with seal included. Articles for combination with adapter plates: KDP 24; KDL 24; KDL/E 24; KD/AG 24; BP 24; BPV 24; BP/H 24; BP/N (92) 1.35 (34.5) 1.35 (34.5) 3.32 (84.5) Ø 0.21 (5.5) 3.32 (84.5) R 0.29 (R 7.5) 2.12 (54) 2.99 (76) 7.63 (194) 6.06 (154) 6.69 (170) KDP 24/AP/LO-BG/1 Type Order no. Color Location spaces Pack qty KDP 24/AP/LO-BG/ smoothed 1 1 Adapter plate matches Lohmeier bus enclosure F200 type BG ; ; ;
22 Cable entry plate KDP Plastic, rectangular Snap-on mounting ,5-2,0 mm Create cut out (4.41 x 1.42 inch) for the KDP 24/x as shown in the illustration. Insert cable entry plate and press on until it clicks into place. Click Where necessary, remove the optional black cover from the locking plate. To do so, press the opening through from the rear until the cover falls out. Select an opening appropriate for the cable diameter and push the cable through the opening from the front. The indicator becomes visible on the rear of the KDP 24/x. Pull cable through to desired length. Retract cable approx inch until the indicator on the rear is no longer visible. Depending on cable diameter and insertion size, the indicator may well become visible on the front side again. 4x5,0-9,2 6x3,0-6,5 4x5,0-9,2 6x3,0-6,5 Position optional label plate (type KSS...) and click in. The clamping range for the openings (e.g. 4x ) are visible on the front of the insertion plate. KSS 108
23 Screw-on mounting Create cut out (4.41 x 1.42 inch) and mounting holes for the KDP 24/x as shown in the illustration. Press through the membrane on the mounting holes on the cable entry plate. Set plate onto the cutout and screw down. 4x Where necessary, remove the optional black cover from the locking plate. To do so, press the opening through from the rear until the cover falls out. Select an opening appropriate for the cable diameter and push the cable through the opening from the front. The indicator becomes visible on the rear of the KDP 24/x. Pull cable through to desired length. Retract cable approx inch until the indicator on the rear is no longer visible. Depending on cable diameter and insertion size, the indicator may well become visible on the front side again. 4x5, 6x3 0-9,2,0-6,5 4x5,0-9,2 6x3,0-6,5 Position optional label plate (type KSS...) and click in. The clamping range for the openings (e.g. 4x ) are visible on the front of the insertion plate. KSS 109
24 110
Accessories 207 kdh_kat_produkt_us_ indd :47
207 Adapter plate Adapter plate Rittal The Rittal adapter plates can be directly mounted into the prefabricated cut-outs from Rittal casings. They are used to accommodate various Murrplastik cable entry
More informationST-B. Plugs for Membranes. Product Description. Advantages & Benefits. Specifications. Compatible with
ST-B Plugs for Membranes D1 L D2 2 Plugs ST-B are used to seal already pierced membranes in various cable entry plates (KEL-DPU / KEL-DPZ / KEL-DP / KEL-QTA-DP) and DT grommets. Perfect for applications
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group
english 27 Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group Ideas move Ideas move the world icotek GmbH is a privately held company in the
More informationKEL-DPZ 24 Cable entry plates
KEL-DPZ 24 IP65 KEL-DPZ on request also available with threaded bushings.* Membrane on front Description Type Order No. Number of PU cables KEL-DPZ entry plates are designed to route and seal standard
More informationTopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389
opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More informationKT Inserts, small. Product description. Assembly. Specification KT grey. Specification KT black
KT Inserts, small Description Type Order No Order No Clamping range PU grey black BTK BTK 41251 41351 Blind insert 10 KT cable inserts small are used with the following cable entry frames: KEL - Page 6-13
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More informationCable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
More informationCable Entry Systems for Potentially Explosive Atmospheres
Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationCable entry system. Contents. Cable entry system. Cable entry system Cable entry system D.2. Cable grommets D.3. Cable entry strips and panels D.
Contents.2 Cable grommets.3 Cable entry strips and panels.4 Strain-relief strips.9 Separable cable gland.10 1420920000 2013/2014.1 Would you prefer to connect a pre-assembled cable to an installation enclosure
More informationCABLE ENTRY SYSTEM KDSClick
CABLE ENTRY SYSTEM KDSClick PRODUCT INFORMATION Cable entry system KDSClick CONTA-CONNECT TURNING CABLES INSIDE OUT! a revolutionary cable entry system! Fast. Safe. Very simple. Our KDSClick cable entry
More information09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
More informationSUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
More informationMale connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationMale connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationInterfaces Service and Field
Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationSolutions for conducted and field-bound disturbances. EMC cable entry systems.
Solutions for conducted and field-bound disturbances EMC cable entry systems www.icotek.com The EMC cable gland alternative Space saving icotek solution: EMC cable entry frame EMC-KEL-U 24 normal EMC cable
More informationWINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
More informationActuator FD61. Product Data Sheet Feature. Option
Product Data Sheet www.moteck.com FD61 FD61 is a quiet and powerful actuator designed for use in furniture application. Compared to FD6, the motor size of FD61 is more compact. There are several models
More informationPulse counters, electromechanical
B 6 / B 8 The standard totalizers B 6 (with manual reset) and B 6, B 8 (without reset) offer a robust construction. They are ideal for use in harsh industrial environments as individual counters or as
More information09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
More informationFLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
More informationPreset counters, electromechanical
The electromechanical preset counters (with manual reset) boast a robust construction. They are ideal for use in harsh industrial environments as stand-alone counters or as plugin variants in combination
More informationVARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
More informationME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationFLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
More informationOMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
More informationMale header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationFlex-Block base/plinth system. Packs of
Base Flex-Block base/plinth system Baying clip for baying the Flex-Block corner pieces Simply insert the clip from behind into the recesses provided (no need for tools). Fibreglass-reinforced polyamide
More informationModular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
More informationWaterproof Electrical Junction Box Kits Technical Data Sheet
Description Environmentally rated electrical junction box kits, that contain all necessary accessories to complete a straightforward neat wiring installation. Plastic enclosures are equipped with flexible
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More informationTemperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
More informationApplications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
More information1.1. Cable Ties and Fixings Cable Ties Inside Serrated. UB-Series Cable Ties. Commercial Grade Cable Ties
1.1 Cable Ties Inside Serrated UB-Series Cable Ties Commercial Grade Cable Ties Cable ties fit for all purposes manufactured in PA66 material. A range of commercial grade cable ties Available in black
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationItem No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
More informationonlinecomponents.com
Power entry modules without line filter Felcom 64 IEC Appliance Inlet C14 with modular extended Components Plug removal necessary for fuse replacement 6421.005X.XX Appliance inlet Appliance outlet Snap-In
More informationInstallation Notes TII Model 341 Protector
Installation Notes TII Model 341 Protector (ATT-IS PEC 32918) for MERLIN Communications System In Range Out of Building (IROB) Station Installation By Trained Technician Only WARNING: Failure to follow
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationFloat switch For industrial applications Model RLS-1000
Level measurement Float switch For industrial applications Model RLS-000 WIKA data sheet LM 50.0 Applications Level measurement of liquids in machine building Control and monitoring tasks for hydraulic
More informationUltima X5000 Round Duct Mount Kit User Instructions
Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base
More informationVandal-proof latching action switch MSM LA
Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationOptiMatic 2 Automatic Powder System (AS02)
E Operating Instructions and Spare Parts List Automatic Powder System (AS0) Translation of the original operating instructions Issued /0 Table of Contents. Fields of application.... Scope of delivery....
More informationConnector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
More informationData sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX
OMNIMATE Signal - series /S2L 3.50-2-row High-temperature-resistant, straight, 2-tier male connector for all common soldering methods. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationConsole systems 1.4. Features. TopConsole system TP. One-piece consoles AP. Universal consoles AP. Console systems
Console systems Features he performance capability of a machine or plant is decided at the console and operating unit. Rittal have set new standards in ergonomics, visual appearance and functionality for
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationv1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
More informationTEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationIP degrees of protection. Degrees of mechanical shock protection IK conforming to the CEI EN Standard
Definition of IP degree of protection, IK degree of mechanical shock protection and self-extinguishing degree of protection IP degrees of protection 1 st DIGIT: PROTECTION AGAINST SOLID BODIES 2 nd DIGIT:
More informationCable drag chain systems MP 10.1
Cable drag chain systems MP 10.1 1 EASYLINE MP 10.1 OPEN EASY (FILL) MECHANISM CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF CAN BE EASILY SHORTENED AND LENGTHENED VERY FLEXIBLE, HIGH TORSION TECHNICAL DATA
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
More informationPop-Up Number(s) : to 03, to 08, to 13,
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 Pop-Up Number(s) : 0 540 00 to 03, 0 540 05 to 08, 0 540 10 to 13, CONTENTS PAGES 1.Range 1 to 3 2.Installation 4 to 8 3.Technical characteristics
More information14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
More information400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks
IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationABB Junction boxes Top solutions for surface mounting
ABB Junction boxes Top solutions for surface mounting ABB Top solutions for top professionals ABB junction boxes are the professional benchmark for their ease of installation and functionality. From the
More informationTaguan 130. Technical data
Taguan 130 ABS hand held enclosure for data acquisition and instrumentation With integrated battery compartment Version with or without display opening Prepared for acceptance of keypads 2 depth variants
More informationApplication Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black. turquoise.
.( Connectors Connector for cables of Ø 6 10 and 10 14 mm With screw connection 2) for rigid, of 0.75 m 2. Unassembled with cable gland 1) and locking device. With crimp contacts for of 0.75 m 2. Unassembled
More informationSafety Interlock Switches
r Safety Interlock Switches Compact Universal Tongue- Operated Safety Interlock Switch Strong and versatile the compact size of the strong, glass-filled polyester housing can be used in many applications
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationPoE/FPR Kit for Auto-Sync Time Clock. The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery.
ASTCPOEK PoE/FPR Kit for Auto-Sync Time Clock The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery. The ASTCPOEK Kit provides Power over Ethernet with Full Power
More informationSafety switches with separate actuator
A Safety switches with separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS CONTACT BLOCKS 9 snap action overlapped FD FP FL FC 21 22 33 3 3NC 2NO+1NC 1NO+ CONDUIT
More informationmodlink msdd Front panel interfaces
Tight and with full visibility The connecting mechanism of the Modlink MSDD with integrated locking mechanism allows the components to be used under protection class IP65. This protection class prevents
More informationEthernet cabling. B Ethernet cabling. Ethernet cabling overview B 2. Cabling 4-poles IP 20 B.1 8 IP 65 / IP 67 B Cables B Tools B.
Ethernet cabling Contents Page B Ethernet cabling Ethernet cabling overview B 2 Cabling 4-poles B.1 8 B.1 22 Cables B.1 96 Tools B.1 104 Cabling 8-poles B.2 8 B.2 20 Cables B.2 90 Tools B.2 98 B 1 Profile
More informationML17 Series Tru-Vue TM Sensors
ML7 Series Tru-Vue TM Sensors Diffuse Mode with Background Suppression See page 44 Features: Ver low color sensitivit Tamper-proof housing with no eternal adjustments Sensing Range: 5 mm Output: 4-in-
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More informationTwo-stage lifting column - RKSlimlift /EM
Two-stage lifting column - RKSlimlift /EM Rod-shaped design and extremely quiet operation RKSlimlift RKSlimlift EM 4 fixing threads Simple connection Drive above the internal profile Large assembly surface
More informationrevos revos Industrial Multipole Connectors 3 48 pole in metal housing Program for Tough Tasks
revos Industrial Multipole Connectors 3 8 pole in metal housing Program for Tough Tasks Heavyduty industrial plug connectors for all applications The heavyduty industrial plug connectors revos are classified
More informationSUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
More informationTwo-stage lifting column - RKPowerlift
Two-stage lifting column - RKPowerlift The power pack for high bending moments Fixing Tapped hole for simple mounting technic design classic design wave design Fixing slot To accommodate clamping bars
More informationSupplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376
Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3
More informationOPTIMA SERIES Industrial plugs and sockets
ZP00662-GB- OPTIMA SRIS Industrial plugs and sockets ScameOnLine http://www.scame.com e-mail: export@scame.com SCAM PARR S.p.A. - VIA COSTA RTA, 5-24020 PARR (BG) ITALY - TL. +39 035 705000 - TLFAX +39
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More informationJSTD1 Safeball A Unique New Category 4 Two-Hand Control Device
JSTD1 Safeball A Unique New Category 4 Two-Hand Control Device Safeball is a completely new approach to the design of one and two-hand safety devices. Instead of the conventional approach using ordinary
More informationVENTILATION BUTTONS 24 V DC
VENTILATION BUTTONS 24 V DC Ventilation button (with foil push buttons and displys) Application: Ventilation button for connection to the ventilation inputs of SHEV or natural ventilation control units.
More informationMCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013
1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationPlexo IP 55/IP 66. Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE. For reference only.
Plexo IP 55/IP 66 Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE www.legrand.com.sg Plexo IP 55 Ingenious features for easy installation >> Time saving guaranteed: no cut-out Uncut pierceable
More information