FULL HD SPORTS ACTION CAMERA with Wi-Fi 3S-0684 USER GUIDE

Transcription

1 FULL HD SPORTS ACTION CAMERA with Wi-Fi 3S-0684 USER GUIDE

2 IMPORTANT SAFETY INFORMATION Please read the instructions carefully before using this camera for proper and safe operation. Using a wall/car charger other than a 5V 1A Charger can damage the camera battery and could result in fire or leakage. Only use chargers marked: Output 5V 1A. Please check the camera operates normally before use. Do not expose the camera to direct sunlight, or point its lens to sunlight - the image sensor may get damaged. Take good care of the camera and prevent water or sand particles from entering the housing when it is used on the beach or in water. Water, sand particles, dust or composites containing salt may cause damage. Keep the camera free of dust and chemical materials. Place it in a cool, dry and well ventilated environment. Do not place the camera in a high temperature, moist or dusty place. If dust or dirt is accumulated on the camera or on its lens - use a soft, clean and dry cloth to wipe away gently. Do not use a cloth to wipe sand particles. Blow them away gently then wipe the camera gently with a cloth suitable for optical devices. Do not use solvents to clean the camera. Do not touch the lens surface with your fingers. 2

3 TABLE OF CONTENTS The Basics...4 Installing and Charging the Battery...6 Installing the microsd Card...8 Turning the Camera ON/OFF...9 Capture/Playback Modes Camera Settings Menu...17 In-Vehicle Settings...19 Downloading the APP...20 Connecting to the APP...21 Transferring Video and Images to PC or Mac...22 Playback Video and Images on a TV with a HDMI port...22 Included Accessories...23 System Requirements...28 Technical Specifications...28 Limitation of Liability and Indemnity...29 Warranty

4 THE BASICS Power/Mode Button Status Indicator Light Charging Status Light Lens 8 Microphone microsd Slot Micro HDMI Port Micro USB Port 4

5 Screen Wi-Fi Button Shutter/Select Button Speaker Battery Door 5

6 INSTALLING AND CHARGING THE BATTERY INSTALLING THE BATTERY 1. First, make sure that the camera is OFF when inserting or removing the battery. 2. Remove the camera from it s housing. 3. Lift up the battery door with your fingernail. Remove the battery door and place the battery door in a safe location. 4. Insert the lithium-ion battery into the battery compartment. Make sure the contacts of the battery are corresponding to the symbols on the camera body. 5. Return the battery door in it s original location until it clicks into place. 6

7 CHARGING THE BATTERY 1. Make sure that the camera is switched OFF. 2. To start charging the battery, connect the supplied micro USB cable into the camera s micro USB port 8 into a PC, MAC or wall adaptor s USB 2.0 port (1A only). The Charging Status Light 3 will be lit blue while charging and will disappear when charging is completed. Charging Status Light Micro USB Port WARNING: Using a wall/car charger other than a 5V 1A Charger can damage the camera battery and could result in fire or leakage. Only use chargers marked: Output 5V 1A. Micro USB cable 7

8 INSTALLING THE MICROSD CARD It is recommended to use 32GB Class 10 microsd cards for maximum performance. microsd Slot 1. Make sure the camera is OFF when inserting or removing the microsd card. 2. Make sure the memory card is inserted in the correct direction (the gold contacts of the microsd card should face the front of the camera) into the microsd card slot. Failure to do so may lead to damaged or lost data. 3. To remove the microsd card, press down on the card with your fingernail until it clicks and pops up. 4. If a microsd card is removed or power supply is interrupted when the camera or computer is connected to the card (i.e. during reading, writing and formatting), your captured images and video may be lost or damaged. 8

9 TURNING THE CAMERA ON/OFF Install the battery, charge fully and insert the microsd card as described on page 8. TURNING ON THE CAMERA Press and hold the Power/Mode Button for 4 seconds until the LCD Screen 9 displays ON and a sound is heard. TURNING OFF THE CAMERA Press and hold the Power/Mode Button for 4 seconds until the LCD Screen displays OFF. After 5 minutes of inactivity the camera will be automatically shut down to conserve battery life. Power/Mode Button Startup screen 9

10 CAPTURE/PLAYBACK MODES Cycling through and selecting capture and playback modes VIDEO I PHOTO I BURST I TIME LAPSE I PLAYBACK Turn camera ON and repeatedly press the Power/Mode Button 1 to cycle through camera modes and settings. The modes will appear in the following order: VIDEO PHOTO BURST SETTINGS TIME LAPSE Mode Video Photo Burst Photo Time Lapse Settings Description Record video Capture a single photo Capture photo bursts Shoot a series of photos at set time intervals Video and photo playback 10

11 VIDEO MODE To record a video, make sure the camera is in Video mode which should be displayed on the LCD Screen 9. If not, short press the Power/Mode Button 1 repeatedly until appears. TO START RECORDING Short press the Shutter/Select Button 11. The video icon on the LCD Screen will turn red. The Status Indicator Light 12 will illuminate, flash red and emit a short beep to indicate recording is in progress. While in Video Recording mode, the LCD Screen will display: elapsed recording time (top centre left); remaining recording time (top centre right); date and time stamp (bottom left); and the battery level indicator (bottom left). LCD Screen in Video mode LCD Screen in Video Recording mode 11

12 TO STOP RECORDING Short press the Shutter/Select Button 11. The video icon on the LCD Screen 9 will return to white. The Status Indicator Light 2 will also stop flashing which indicates that a recording has ceased. When the microsd card is full or the battery is drained, recording will cease automatically. The recorded video will be saved before the camera switches off. PHOTO MODE SINGLE IMAGE To take a photo, make sure the camera is in Photo mode which should be displayed on the LCD Screen. If not, short press the Power/Mode Button 1 repeatedly until appears. TO TAKE A PHOTO: Press the Shutter/Select Button. The camera will make a short beep then emit the camera shutter sound. 12

13 While in Single Image mode, the LCD Screen will display: number of images taken (top centre left); number of images remaining (top centre right); and the battery level indicator (bottom left). LCD Screen in Single Image photo mode BURST MODE To take a burst photo, make sure the camera is in Burst mode which should be displayed on the LCD Screen. If not, short press the Power/Mode Button 1 repeatedly until appears. TO TAKE A BURST PHOTO Press the Shutter/Select Button. The camera will make a short beep then emit the camera shutter sound. In Burst mode, your camera takes 3 photos in 1.5 seconds. While in Burst mode, the LCD Screen will display: number of images taken (top centre left); number of images remaining (top centre right); and the battery level indicator (bottom left). LCD Screen on Burst Mode 13

14 TIME LAPSE MODE To take a Time Lapse photo, make sure the camera is in Time Lapse mode which should be displayed on the LCD Screen. If not, short press the Power/ Mode Button 1 repeatedly until appears. TO TAKE A PHOTO Press the Shutter/Select Button 11. The camera will make a short beep then emit the camera shutter sound. In Time Lapse mode, your camera captures a series of photos at 2, 3, 5, 10, 20, 30 or 60 second intervals. While in Time Lapse mode, the LCD Screen will display: number of images taken (top centre left); number of images remaining (top centre right); and the battery level indicator (bottom left). LCD Screen in Time Lapse Photo mode 14

15 PLAYBACK/REVIEW MODE To view your videos and photos make sure the camera is in Video or Photo Playback mode which should be displayed on the LCD Screen 9 by short pressing the Power/Mode Button 1 repeatedly until Video Playback appears or Photo Review appear. Choose either the Video or Photo by pressing the Shutter/ Select Button 2. Use the Power/Mode Button to scroll through your videos or photos. Press the Shutter/Select Button to review a video. To return to the Playback menu, press the Wi-Fi Button 10. LCD Screen when Video Playback is selected LCD Screen when Photo Playback is selected 15

16 QUICK MODE Quick Mode allows you to quickly access the menu settings from Stand By Mode. TO ENTER QUICK MODE Verify the camera is in standby Video or Camera Mode (where camera in ON and NOT recording). Press and hold the Shutter/Select Button 11 for 3 seconds. The Quick Mode menu will appear. Short press the Power/Mode Button 1 repeatedly to scroll through the Quick Mode options. To select a Quick Mode press the Shutter/Select Button. To exit Quick Mode, hold down the Shutter/Select Button for 3 seconds. LCD Screen in Quick Mode 16

17 CAMERA SETTINGS Turn camera ON and repeatedly press the Power/Mode Button 1 to cycle through camera modes and stop at the Settings screen. Press the Shutter/Select Button 2 to enter the Settings main menu. LCD Screen when Settings To select a menu item, press the is selected Shutter/Select Button. To scroll through the sub-menu options, press the Power/Mode Button. To select/change one of the sub-menu settings options, press the Shutter/Select Button. Once a menu option has been changed you will be returned to the main settings menu. To exit the sub-menu or main menu, press the Wi-Fi Button 10 or scroll to the button on the LCD Screen 9 by using the Power/ Mode Button and pressing the Shutter/Select Button. 17

18 CAMERA SETTINGS MENU GUIDE Setting Description Options Default Driving (In-vehicle) Recorder The Driving Recorder activates the Auto Record feature if plugged into a USB Car Charger ON/OFF OFF Video Resolution Set the Video Resolution to your preferred output 1080P 30fps/720P 30fps 1080P Looping Video Choose the Loop Recording time ON/OFF/1/2/5/10 mins OFF Time Stamp Turn the Date & Time Stamp ON/OFF OFF/Date/Date & Time Date & Time Exposure Set the camera aperture Exposure level -2.0/-1.7/-1.3/ -1.0/-0.7/-0.3/0 0.0 Photo Resolution Set the Photo Resolution to your preferred output 12MP/8MP/5MP/2MP 12MP Burst Photo Turn the Photo Burst function ON/OFF ON 3 Photos ON Time Lapse Set the Time Lapse time (seconds) 2s/3s/5s/10s/20s/30s/60s 5s Continuous Lapse Power Frequency Language Date & Time Turn Continuous Lapse video recording ON/OFF ON/OFF OFF Set the Power Frequency 50Hz/60Hz/Auto Auto Set the language Set the Date & Time format EN/SC/TC/FR/SP/IT/POR/ DU/POL/RU/JP MM/DD/YY, YY/MM/DD, or DD/MM/YY Sound Indicator Menu Shutter Sound Turn the Shutter sound ON/OFF ON/OFF ON Start Up Sound Turn the Startup sound ON/OFF ON/OFF ON Beep Turn the Beep sound ON/OFF ON/OFF ON Volume Set the volume of Audio 0/1/2/3 3 EN YY/MM/DD Upside Down Change the image orientation on the LCD Screen ON/OFF OFF Screen Saver Turn the Screen Saver ON/OFF or set the delay OFF/1 min/3 mins/5 mins OFF Power Saver Turn the Power Saver function ON/OFF or set the delay OFF/1 min/3 mins/5 mins OFF Format Format the microsd card No/Yes No Reset Reset the camera to the Factory Default Settings No/Yes No Version Current Firmware and Batch Number Firmware Version/ Batch Number 18

19 IN-VEHICLE SETTINGS To set your camera up for in-vehicle crash cam recording: In the settings menu, turn the Driving Recorder setting to ON; In the settings menu, turn the Looping Video setting to ON; Join the Suction Mount and the Camera Clip Housing together. Tighten the screw. Insert the camera into the Camera Clip Housing. Place the Suction Mount and camera in a suitable position on windscreen of your vehicle. To activate Auto Record mode: Connect a 5V 1.0A Micro USB car charger (not included) to the camera; When your car is in operation, the camera will automatically start to record in Looping Video mode. If you wish to record your entire journey turn off the Looping Video mode. Power and recording will automatically stop when your car is turned off. To activate manual recording please follow the instructions on page

20 DOWNLOADING THE APP The ismart DV App lets you control your camera remotely using a smartphone or tablet. Features include camera control, live preview, photo playback and sharing of content and more. Download the ismart DV App to your smartphone or tablet via the Apple App Store or Google Play Store. Do not open the App. or search on the App Store for ismart DV * Requires ios 8.0 or later. Compatible with iphone, ipad, and ipod touch. or search on Google Play for ismart DV * Requires Android 4.1 or later. *Playback may not be supported on some devices. ismartdv is a third-party App that is supported by the developer. Compatibility varies by device. Content playback, sharing and access to the camera s memory card might be not available on some devices. 20

21 CONNECTING TO THE APP FOR THE FIRST TIME 1. Press the Power/Mode Button 1 to power the camera ON. 2. Make sure the camera is in standby mode (where the camera is ON and not recording). 3. Press the Wi-Fi Button 10 on the camera to turn on Wi-Fi. 4. In your device s Wi-Fi settings, connect to the network called 3SIXT Enter the password Open the ismart DV App on your device. 7. Add the new camera and allow access to your photos folder when prompted. 21

22 TRANSFERRING VIDEO AND IMAGES TO PC OR MAC Turn the camera ON and connect it to a PC or MAC s USB 2.0 port via the supplied micro USB cable. For PC: Your captured videos and images will be located in My Computer > Removable Disc. For MAC: Your captured videos and images will be located in the desktop item No Name. PLAYBACK VIDEO AND IMAGES ON A TV WITH A HDMI PORT 1. Before connecting a micro HDMI cable (not supplied), stop any recording and disconnect the Wi-Fi connection. 2. Connect the microhdmi cable between the camera and a TV s HDMI port. 3. For Playback Mode, short press the Power/Mode Button The camera s LCD screen 9 will be mirrored on the TV screen. 5. Follow the Playback Mode instructions on page 15 to review your captured video and images. 22

23 INCLUDED ACCESSORIES WATERPROOF HOUSING REPLACEMENT DOOR WATERPROOF HOUSING MOUNT SUCTION MOUNT ADHESIVE CLIP BASE (X2) HANDLEBAR/ POLE MOUNT HANDLEBAR/ HELMET MOUNT ADAPTER (X3) CURVED MOUNT CAMERA CLIP HOUSING CLIP HOUSING MOUNT CLIP HOUSING ADAPTER CLIP HOUSING BELT CLIP HELMET STRAPS (X2) 23

24 WATERPROOF HOUSING The camera is submersible up to 30m if the camera is correctly sealed in the Waterproof Housing. To fit and test Waterproof Housing: 1. Release the secure clasp of the Waterproof Housing. 2. Inspect the water sealing gasket (the rubberised material) to be sure it s in good condition. 3. Test the integrity of the seal by closing the Waterproof Housing without inserting the camera. Submerse the Waterproof Housing completely in a bowl of water for about a minute. 4. Remove the Waterproof Housing from the water, dry off and then open. 5. If the entire interior is dry, the Waterproof Housing is safe for under water use. 6. Make sure to put the camera in the desired recording position before inserting the camera in the Waterproof Housing. 24

25 ACCESSORY ASSEMBLY WATERPROOF HOUSING = CLIP HOUSING = HANDLE BAR MOUNT Option 1 = Option 2 = 25

26 HELMET MOUNT Option 1 = Option 2 = Option 3 = Option 4 = 26

27 CLIP MOUNT Option 1 = Option 2 = Option 3 = Option 4 = 27

28 SYSTEM REQUIREMENTS WINDOWS Microsoft Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 or later Pentium 4 processor (or above) 1 GB of RAM, 250 MB available hard disk space QuickTime 6 or higher Microsoft Internet Explorer 7 or higher Windows Media Player 10 or higher DirectX 9 or higher MACINTOSH Intel processor running Mac OS X v10.5.x or later QuickTime 6 or higher, 1 GB RAM, 250 MB available hard disk TECH SPECS Image Settings Lens Video Resolution Picture Resolution Features Storage Media (not included) File Format Input/Output Wi-Fi Power Source System requirements Recording time Charging time Dimensions Weight Auto ISO 140 (wide) Viewing Angle 1080p@30fps (1920 x 1080) 720p@30fps (1280 x 720) 12MP / 8MP / 5MP / 2MP Loop Recording, Burst, Time-Lapse, Exposure Adjustment, Time-delay, Power Frequency Adjustment microsd / microsd HC (up to 32GB) MOV / JPG Micro USB (5V 1A) / Micro HDMI b/g/n 900mAh rechargeable Lithium-ion battery ios 8.0 or newer (for app) Android 4.1 or newer (for app) Windows XP or newer Mac OSX 10.5x or above 90 mins (using 1080p/32GB microsd) 3 hours 67 x 44 x 28 mm 64g 28

29 LIMITATION OF LIABILITY AND INDEMNITY INTENDED USE To the maximum extent permitted by applicable law, 3SIXT shall not be liable for any damages suffered as a result of using, modifying, contributing, copying, distributing, or downloading the materials, use of the 3SIXT Full HD Sports Action Camera User Manual or use of any 3SIXT product and/or related apps. In no event shall 3SIXT be liable for any indirect, extraordinary, exemplary, punitive, special, incidental, or consequential damages (including, without limitation, loss of data, revenue, profits, use or other economic advantage) however arising, whether for breach of contract or in tort, even if 3SIXT has been previously advised of the possibility of such damage. You agree that you have sole responsibility for adequate protection and backup of data and/or equipment used in connection with the product and software and will not make a claim of any nature against 3SIXT for lost data, inaccurate output, work delays or lost profits resulting from the use of the materials. You agree to indemnify, hold harmless and defend 3SIXT, together with its affiliates, parent and subsidiary entities, successors, assigns, partners, managers, members, employees, officers, directors and shareholders, from and against any and all damages, liens, liabilities, losses, demands, actions, causes of action, claims, costs and expenses (including, without limitation, reasonable attorneys fees, charges and disbursements, as well as the cost of in-house counsel and appeals) arising from or related to 3SIXT, the use of the 3SIXT Full HD Sports Action Camera User Manual or any 3SIXT product and/or related apps. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. The camera s Wi-Fi should only be used to establish a data connection to your device via a wireless network with a wireless router or other wirelessenabled device. Any other use or extended use is not supported. Any claims for damage resulting from improper use are excluded. The risk is with the operator. 29

30 REFERENCED WEBSITES/APPS The 3SIXT Full HD Sports Action Camera User Manual may contain or reference links to third-party sites and apps, however, please be aware that 3SIXT is not responsible for and cannot control these other sites/apps. 3SIXT makes no representations or warranties whatsoever about any other websites/apps which you may access as a result of reading this User Manual, or otherwise. 1 YEAR WARRANTY 3SIXT will replace the faulty product at no cost to the consumer. The warranty does not extend to any consequential damages or costs that may be incurred and is valid for 1 year from date of purchase. The consumer must return the faulty product to the retail store it was purchased from together with proof of purchase. The benefits to the consumer under this warranty are in addition to other rights and remedies of the consumer under Australian and New Zealand laws in relation to the goods to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Due to possible user resealing error, this product is not covered under warranty against Waterproof Housing leakage or any resulting damage. Please review and follow the instructions carefully when sealing the Waterproof Housing. The warranty is provided by: Australia: Cellnet Group Limited Qantas Dr, Eagle Farm, QLD 4009 Phone: 1300 CELLNET ( ) info@cellnet.com.au New Zealand: Cellnet Limited 10a Orbit Dr, Rosedale, Auckland 0632 Phone: 0800 CELLNET ( ) info@cellnet.co.nz. 30

31 For more information, visit or visit