Motor News Page 1/10. Announcement of New product release: MINAS A6 Family Geared AC Servo Motors. March 29, 2018
|
|
|
- Marion Lyons
- 5 years ago
- Views:
Transcription
1 Motor News Page 1/10 March 29, 2018 Announcement of New product release: MINAS A6 Family ed AC Servo Motors Motor Business Unit, Electromechanical Control Business Division, Automotive & Industrial Systems Company, Panasonic Corpon Thank you for your daily support and efforts to our business. This is an announcement about Servo motor with reducers compatible with the MINAS A6 Family. Please consider using these products for your project. 1. Order accepting date: starting from April 10, Product features - Reduction gears are compatible with MINAS A6 Family AC Servo motors Rated rotational speed 3000 r/min, Max. rotational speed 6500 r/min (MHMF series 750 W only 6000 r/min), Momentary Max. peak torque 350% - Compatibility with previous products (MSME series, MSMD series, MHMD series) is maintained The gear attachment dimensions and gear frame size are the same as previous products Equivalent to protection class IP44 (gear reducer portion) - Compatible with the following series of MINAS A6 Family drivers Pulse control and analog control driver: A6 SE series, A6 SF series, A6 SG series (special order products) High-speed network driver - compatible with Realtime Express (RTEX) driver: A6 NE series, A6 NF series, EtherCAT compatible driver: A6 BE series (special order products), A6 BF series (special order products) 3. range MQMF series 100 W, 200 W, 400 W MHMF series 100 W, 200 W, 400 W, 750 W Two types of connectors and lead wires are available 4. Four types: 1/5, 1/9, 1/15, 1/25 * reducer 1/25 is not available for MHMF series 100 W and 400 W motors. 5. s, prices, and order format MINAS A6 Series ed AC Servo motors model listing (MQMF series, MHMF series) Refer to Page 3 onwards. For the prices, please send RFQ (request for quote) to our sales representatives. 6. External dimensions and specifications Refer to the information on our website on the MINAS A6 Family catalog.
2 Motor News Page 2/10 7. Appearance MQMF Series : 200 W Connector type Servo motor with reducer MHMF Series : 750 W Lead wire type Servo motor with reducer
3 Motor News Page 3/10 MINAS A6 Series ed AC Servo Motor Model Listing [MQMF] Connector type JN11 MQMF011L31N /5 MQMF011L32N /9 MQMF011L33N /15 MQMF011L34N /25 MQMF011L41N /5 MQMF011L42N /9 MQMF011L43N /15 MQMF011L44N /25 MQMF012L31N /5 MQMF012L32N /9 MQMF012L33N /15 MQMF012L34N /25 MQMF012L41N /5 MQMF012L42N /9 MQMF012L43N /15 MQMF012L44N /25 MQMF021L31N /5 MQMF021L32N /9 MQMF021L33N /15 MQMF021L34N /25 MQMF021L41N /5 MQMF021L42N /9 MQMF021L43N /15 MQMF021L44N /25 MQMF022L31N /5 MQMF022L32N /9 MQMF022L33N /15 MQMF022L34N /25
4 Motor News Page 4/10 [MQMF] Connector type JN11 MQMF022L41N /5 MQMF022L42N /9 MQMF022L43N /15 MQMF022L44N /25 MQMF041L31N /5 MQMF041L32N /9 MQMF041L33N /15 MQMF041L34N /25 MQMF041L41N /5 MQMF041L42N /9 MQMF041L43N /15 MQMF041L44N /25 MQMF042L31N /5 MQMF042L32N /9 MQMF042L33N /15 MQMF042L34N /25 MQMF042L41N /5 MQMF042L42N /9 MQMF042L43N /15 MQMF042L44N /25
5 Motor News Page 5/10 [MQMF] Lead wire type MQMF011L71N /5 MQMF011L72N /9 MQMF011L73N /15 MQMF011L74N /25 MQMF011L81N /5 MQMF011L82N /9 MQMF011L83N /15 MQMF011L84N /25 MQMF012L71N /5 MQMF012L72N /9 MQMF012L73N /15 MQMF012L74N /25 MQMF012L81N /5 MQMF012L82N /9 MQMF012L83N /15 MQMF012L84N /25 MQMF021L71N /5 MQMF021L72N /9 MQMF021L73N /15 MQMF021L74N /25 MQMF021L81N /5 MQMF021L82N /9 MQMF021L83N /15 MQMF021L84N /25 MQMF022L71N /5 MQMF022L72N /9 MQMF022L73N /15 MQMF022L74N /25
6 Motor News Page 6/10 [MQMF] Lead wire type MQMF022L81N /5 MQMF022L82N /9 MQMF022L83N /15 MQMF022L84N /25 MQMF041L71N /5 MQMF041L72N /9 MQMF041L73N /15 MQMF041L74N /25 MQMF041L81N /5 MQMF041L82N /9 MQMF041L83N /15 MQMF041L84N /25 MQMF042L71N /5 MQMF042L72N /9 MQMF042L73N /15 MQMF042L74N /25 MQMF042L81N /5 MQMF042L82N /9 MQMF042L83N /15 MQMF042L84N /25
7 Motor News Page 7/10 [MHMF] Connector type JN11 MHMF011L31N /5 MHMF011L32N /9 MHMF011L33N /15 MHMF011L41N /5 MHMF011L42N /9 MHMF011L43N /15 MHMF012L31N /5 MHMF012L32N /9 MHMF012L33N /15 MHMF012L41N /5 MHMF012L42N /9 MHMF012L43N /15 MHMF021L31N /5 MHMF021L32N /9 MHMF021L33N /15 MHMF021L34N /25 MHMF021L41N /5 MHMF021L42N /9 MHMF021L43N /15 MHMF021L44N /25 MHMF022L31N /5 MHMF022L32N /9 MHMF022L33N /15 MHMF022L34N /25 MHMF022L41N /5 MHMF022L42N /9 MHMF022L43N /15 MHMF022L44N /25
8 Motor News Page 8/10 [MHMF] Connector type JN11 MHMF041L31N /5 MHMF041L32N /9 MHMF041L33N /15 MHMF041L41N /5 MHMF041L42N /9 MHMF041L43N /15 MHMF042L31N /5 MHMF042L32N /9 MHMF042L33N /15 MHMF042L41N /5 MHMF042L42N /9 MHMF042L43N /15 MHMF082L31N /5 MHMF082L32N /9 MHMF082L33N /15 MHMF082L34N /25 MHMF082L41N /5 MHMF082L42N /9 MHMF082L43N /15 MHMF082L44N /25
9 Motor News Page 9/10 [MHMF] Lead wire type MHMF011L71N /5 MHMF011L72N /9 MHMF011L73N /15 MHMF011L81N /5 MHMF011L82N /9 MHMF011L83N /15 MHMF012L71N /5 MHMF012L72N /9 MHMF012L73N /15 MHMF012L81N /5 MHMF012L82N /9 MHMF012L83N /15 MHMF021L71N /5 MHMF021L72N /9 MHMF021L73N /15 MHMF021L74N /25 MHMF021L81N /5 MHMF021L82N /9 MHMF021L83N /15 MHMF021L84N /25 MHMF022L71N /5 MHMF022L72N /9 MHMF022L73N /15 MHMF022L74N /25 MHMF022L81N /5 MHMF022L82N /9 MHMF022L83N /15 MHMF022L84N /25
10 Motor News Page 10/10 [MHMF] Lead wire type MHMF041L71N /5 MHMF041L72N /9 MHMF041L73N /15 MHMF041L81N /5 MHMF041L82N /9 MHMF041L83N /15 MHMF042L71N /5 MHMF042L72N /9 MHMF042L73N /15 MHMF042L81N /5 MHMF042L82N /9 MHMF042L83N /15 MHMF082L71N /5 MHMF082L72N /9 MHMF082L73N /15 MHMF082L74N /25 MHMF082L81N /5 MHMF082L82N /9 MHMF082L83N /15 MHMF082L84N /25 end
Troubleshooting Err27.4
Troubleshooting Err27.4 2014/1/23 Motor Business Division Appliances Company Panasonic Corporation Err27.4 Command Error When Err27.4 occurs on correct parameter setting, there is a problem inside command
Mitsubishi General-Purpose AC Servo Sales and Service
Mitsubishi General-Purpose AC Servo Sales and Service No. 10-26E Transition to Made-to-order Production for General-purpose AC Servo MR-C Series Thank you for your continued patronage of the Mitsubishi
CRK Series A /0.36 /Geared Stepper Motor and Driver Package. Features Compact, Lightweight Microstep Drivers. Two Driver Types are Available
A-26.72 / Stepper Motor and Package For details on this product please refer to our website. www.orientalmotor.com/catalog For detailed information about regulations and standards, please see the Oriental
How to use Digital key pad (option)
Function of Digital key pad Monitoring of rotation speed (actual speed) and load factor, etc. Display detail of trip, and trip history. Trip reset by pressing and. Parameter setting, initialization, and
For more information on these functions and others, please refer to the EDC User s Manual.
EDC Handheld Device Guide BASIC FUNCTION When using the handheld controller, please set the dial switch to 0 on the front side of the panel of the EDC Controller. This will allow the user to have access
Application Note. ESI File Usage. Applicable Products: Yaskawa SERVOPACKs with CANopen over EtherCAT
1.1.1.1.1.1.1.1.1. Application Note ESI File Usage Applicable Products: Yaskawa SERVOPACKs with CANopen over EtherCAT Yaskawa America, Inc. Drives & Motion Division 2015 April 16, 2015 Page 1 of 6 Table
Ultra5000 Intelligent Positioning Drive Frequently Asked Questions
Ultra5000 Intelligent Positioning Drive Frequently Asked Questions Q: What is the Ultra5000? A: The Ultra5000 Intelligent Positioning Drive is one of the latest additions to the popular Ultra series of
A5 series (Standard type)
Specifications A series (Standard type) Basic Specifications Input power 0V Main Single phase, 100 to 120V +10% 0/60Hz % Single phase, 100 to 120V Main Main Withstand voltage Environment method Encoder
Panasonic Electric Works Motion Control Solutions
Panasonic Electric Works Motion Control Solutions Panasonic Electric Works Motion Control Solutions WAAROM servotechniek? WAT is de behoefte? WELKE oplossing kiezen we? Motion Control www.infoplc.net Answering
G5-Series AC Servo Drives with General-purpose Pulse Train or Analog Inputs
Refer to the Ordering Information. Specifications General Specifications Item Specifications Ambient operating temperature and humidity 0 to 55 C, % max. (with no condensation) Storage ambient temperature
Manual Specifications Dimensions. CAD Characteristics Connection and Operation. Microstep 1600 P/R (0.225 /step)
A-8 Stepper s Series $For detailed information about regulations and standards, please see the Oriental website. This is a high torque and low vibration stepper motor with a basic step angle of.72 (resolution
Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of SMARTSTEP A series
PRODUCT NEWS Correction Reissue Product Discontinuation Notices July 2, 2012 Servomotors / Servo Drivers No. 2011098E(3) Discontinuation Notice of SMARTSTEP A series REQUEST There was modification in portion
Selection of controllers and integrated systems
maxon motor: Selection of controllers and integrated systems 2017 maxon motor ag maxon_control-system-selection, WJ, Animated Version V2.31 Criteria to find the base drive controller family Base criteria
Compax3 Servo Drive System Catalog USA. Compax3 family
Compax3 Servo Drive System Catalog USA Compax3 family Compax3 Family Compax3 intelligent servo drive system Compax3H IEC61131-3 Compax3S Global orientation Control technology Direct mains operation for
Resolver to Digital Expansion Board
Resolver to Digital Expansion Board Catalog No. EXB009A01 Installation and Operating Manual 6/98 MN1313 Table of Contents Section 1 General Information............................. 1-1 Introduction....................................
Motion Control Featuring Distributed and Centralized Motion Control Solutions
Featuring Distributed and Centralized Solutions Featuring Distributed and Centralized Solutions A Comprehensive Selection of Solutions Control Techniques offers the most comprehensive selection of motion
OVERVIEW AC SERVO DRIVES & MOTION CONTROL
OVERVIEW AC SERVO DRIVES & MOTION CONTROL 1 Comprehensive motion control solutions by Panasonic D GT and HM0 series touch terminals Page 51 A MINAS A5 series servo drives Page 6 C FP series PLC Page 38
Product Catalog. Courtesy of Steven Engineering, Inc. - (800)
Product Catalog ABOUT US : Corporate Profile ModuSystems was founded in March 2014 with a goal of creating an easier way to implement everything from simple to complex motion control solutions. Core to
Electro-Mechanical Training System with Stepper Motor
Electro-Mechanical Training System with Stepper Motor LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 06/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2
Ultra3000 Digital Servo Drives
The Ultra000, Ultra000i, Ultra000-SE, Ultra000-DN, and Ultra000X-DN drives make up a family of flexible, high-performance digital servo drives for a variety of motion control applications and architectures.
G5-series AC Servo Drives with Built-in MECHATROLINK-II Communications. 0 to +55C, 90% RH max. (with no condensation)
s with Built-in MECHATROLINK-II Communications R88D-KN@-ML2 Contents Ordering Information Specifications General Specifications Characteristics Servo Drives with Single-phase VAC Input Power Servo Drives
F Network-Compatible Products, Controller
F -Compatible Products, Controller -Compatible Products, Controller F-1 of Compatible Products... F-2 Modbus (RTU)-Compatible Products F-6 - Compatible Products Modbus (RTU) EtherCAT-Compatible, CC-Link-Compatible,
Communication. Outline of Communication. Merits
Communication Outline of Communication You can connect up to MINAS-A series with your computer or NC via serial communication based on RS and RS, and can execute the following functions. () Change over
The compact, simple solution for 400 to 480 V applications. Family of Digital Amplifiers
The compact, simple solution for 400 to 480 V applications Family of Digital Amplifiers A compact, easy-to-use digital amplifier with integrated power supply for 400 to 480 V applications Simple installation
Wind Turbine Training System
Wind Turbine Training System LabVolt Series Datasheet Festo Didactic en 06/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List of Equipment 2 List of Manuals 3 Table
Blue Point Engineering
DMX 8-Channel Driver Overview he DMX 8- Channel Driver board is designed to provide 8- consecutive channels of standard or extended range movements for analog type R/C s with output control pulses from
L-force. Inverter Drives 8400 protec. On site and all systems go!
L-force Inverter Drives 8400 protec On site and all systems go! 2 L-force Decentralised drives 2 The major challenges of the future are to be found in the areas of cost efficiency, time-saving and quality
SYSMAC CS-series MECHATROLINK-II-compatible Position Control Units
SYSMAC CS-series MECHATROLINK-II-compatible Position Control Units CSM_CS1W-NC_71_DS_E_7_4 Decrease TCO with Simple Operation, Reduced Wiring, Batch Settings, and Batch Management Control Servos for up
Motorized Linear Slides EAS Series Motorized Cylinders EAC Series
AR Series Equipped Motorized Linear Slides EAS Series EAC Series / New Standards for Motorized Linear Slides and Oriental Motor presents a variety of lineups for linear motion, broadening the range of
Automation solutions Drives, PLC, motion, motors and safety
Automation solutions Drives, PLC, motion, motors and safety Motion control solutions Scalable software solutions IEC61131-3 programming environment PLCopen motion library Scalable controller family Scada
OPTIMUS MOTUS Motion Designer
Harmonic motions for servo drives with electronic cams Grafic definition of the complete displacement plan Automatic generation of an acceleration optimized displacement diagram from the displacement plan
Selecting Your Sigma II Indexer System
Selecting Your Sigma II System Specify part number, the indexer add-on application module. Use the tables beginning on the following page to specify choice of indexer interface cables, mating connectors
«Inspired by Simplicity»
«Inspired by Simplicity» "Simplicity is the ultimate sophistication." Leonardo da Vinci (1452 1519) With, we built a new, best-in-class servo drive. And we designed the Lexium BMH and BSH servo motors.
200W ISCM4805 / 8005 INTELLIGENT SERVO CONTROL MODULES FEATURES DIGITAL MOTOR CONTROL FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS
ISCM4805 / 8005 INTELLIGENT SERVO CONTROL MODULES DIGITAL MOTOR CONTROL FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS 200W The ISCM4805 and ISCM8005 are new Technosoft high-performance intelligent servo
Servo Drives 930K fluxxtorque. decentralised, intelligent, precise
Servo Drives 930K fluxxtorque decentralised, intelligent, precise Servo Drives 930K fluxxtorque part of your machine 2 Out of the control cabinet and onto the machine, this is what decentralised drive
KL1108 Closed Loop Stepping System
KL1108 Closed Loop Stepping System 1. Introduction Descriptions KL1108 is a new generation hybrid servo driver, it combines the advantage of both the servo system and stepper system,the system acts as
CNC enthusiast September, 2011
Instant Quote PC based CNC controls Machine tools and Custom applications SALES SERVICE TRAINING CNC enthusiast September, 2011 Thank you for inquiring about our Build it Yourself CNC control components
ILA1F572PB1A0 integrated drive ILA with servo motor V - CANopen - PCB connector
Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
Drives & Controls. IndraDrive Mi2 motor-integrated drive system. Open and flexible communication through integrated multi-ethernet interface
IndraDrive Mi2 motor-integrated drive system Open and flexible communication through integrated multi-ethernet interface High level of machine safety and productivity with available safety option STO Safe
From a single wire harness to an entire Electrical Distribution System (EDS), PKC delivers power where and when you need it.
CATALOG INDEX Introduction 3 Overview 4 Eyelets Straight 5 Eyelets Small 7 Eyelets High Current 8 Eyelets Specialty 9 Eyelets With-Anti Rotation Tab 10 Eyelets Octagon Hole 11 Interlocking Ring Terminals
STEP MOTOR DRIVER SMD-4.2DIN
SMART MOTOR DEVICES http://www.smd.ee STEP MOTOR DRIVER SMD-4.2DIN manual SMDDIN.42.001 2018 1. Product designation Step motor controller SMD-4.2DIN is an electronic device designed to operate with 2 or
Master Pulse Reference/ Isolated Pulse Follower Expansion Board
Master Pulse Reference/ Isolated Pulse Follower Expansion Board Catalog No. EXB005A01 Installation and Operating Manual 2/03 MN1312 Y1 Table of Contents Section 1 General Information.............................
Manual of 2-phase hybrid stepper motor driver DQ542MA
Manual of 2-phase hybrid stepper motor driver DQ542MA Introduction: DQ542MA is a type of two-phase hybrid stepping motor driver, the drive voltage of which is from 18VDC to 5VDC. It is designed for use
IBL2401 INTELLIGENT SERVO DRIVE DIGITAL DRIVE FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS 25W FEATURES
IBL2401 INTELLIGENT SERVO DRIVE DIGITAL DRIVE FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS 25W The IBL2401 is a new Technosoft high-performance intelligent drive, combining motion ler, drive and PLC
Toll Free Phone: Toll Free Fax:
AKD PDMM Integrated Servo Drive and Automation Controller Kollmorgen Automation Suite Programmability in an AKD Drive with Multi-Axis Master Controller A K D P D M M i n t e g r a t e d S e r v o D r i
Kinetix 6000 Axis Module and Shunt Module
Installation Instructions Kinetix 6000 and Shunt Module Catalog Numbers 2094-AMxx, 2094-BMxx 2094-AMxx-S, 2094-BMxx-S 2094-BSP2 Topic Page About This Publication 1 Important User Information 2 Before You
SYSTEMS INTELLIGENT SERVO DRIVE. Voice Coil Motor (VCM) Operation Using MaxTune DC Servo Drive Application Note.
SYSTEMS INTELLIGENT SERVO DRIVE Voice Coil Motor (VCM) Operation Using MaxTune DC Servo Drive Application Note Document Revision: 1.0 www.pbasystems.com.sg MaxTune Overview Revision History Document Revision
4 - Lexium integrated drives
Contents - Lexium integrated dries Product offer b............................................... page / ILp integrated dries for CANopen, PROFIBUS DP and RS b...............................................
for Simulink & Sysmac Studio
NJ/NX/NY-series Controller Startup Guide for Simulink & Sysmac Studio SYSMAC-SE20 NX701- NX1P2- NJ501- NJ301- NJ101- NY532- NY512- R88D-KN -ECT R88D-1SN -ECT GX-AD0471/DA0271 NX-AD NX-DA NA5- W NA5- W
Motion Product Overview
SPECIALTY I/O POSITION SENSING MOTION CONTROL Motion Product Overview Advanced Micro Controls Inc Specialty I/O Position Sensing Motion Control Today s Agenda 1. Introduction 2. AMCI stepper products 3.
TOTALFLOW Technical Bulletin 109
TOTALFLOW Technical Bulletin 109 Phase-Out and Upgrade Options for the Model 6600 Flow Computer Unit Totalflow Technical Bulletin Version 1.0, Revision AC (14 May 2004) Introduction The model 6600 Flow
DS2020SingleAxis ExtremelyCompact ServoDrives
DS2020SingleAxis ExtremelyCompact ServoDrives INTRODUCTION If you need the best performance and design flexibility, look no further than Moog and its expertise. With collaboration, creativity and cutting-edge
SERVO-DRIVE. PROGRAMMABLE STEP MOTOR CONTROLLER R ETH and R ETH. Manual Ver. 05
SERVO-DRIVE PROGRAMMABLE STEP MOTOR CONTROLLER R272-42-ETH and R272-80-ETH Manual Ver. 05 2018 1. Product designation Programmable step motor controller R272-42-ETH is designed to operate with hybrid two
Approximately half the power consumption of earlier Renesas Technology products and multiple functions in a 14-pin package
Renesas Technology to Release R8C/Mx Series of Flash MCUs with Power Consumption Among the Lowest in the Industry and Powerful On-Chip Peripheral Functions Approximately half the power consumption of earlier
5450 NW 33rd Ave, Suite 104 Fort Lauderdale, FL Fruitland Ave Los Angeles, CA SST7000 SST7100. Speed Switch / Transmitter
5450 NW 33rd Ave, Suite 104 Fort Lauderdale, FL 33309 3211 Fruitland Ave Los Angeles, CA 90058 SST7000 SST7100 Speed Switch / Transmitter Installation and Operation Manual Rev. C P/N145F-13112 PCO 00009270
PosiStep - Single Axis Packaged Intelligent Microstepping Drive
Precision Motion Control Brushless Motors Stepper Motors AC Synchronous DC Servo Motors Gearheads Encoders Systems Fieldbus Gateways CAM Control Mechanical Integration PosiStep - Single Axis Packaged Intelligent
Product Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
Hybrid AC Driver [GCNC-1110]
![Hybrid AC Driver [GCNC-1110]](/thumbs/86/94474371.jpg "Hybrid AC Driver [GCNC-1110]")
Page 1 Installation Manual and Datasheet Page 2 Key Features Smooth and quiet operation at all speeds and extremely low motor heating Industrial grade performance for an alternating current servo motor
EtherCAT Plug-in Modules
526 Bus Terminals for circuit boards 527 528 534 EtherCAT plug-in modules Efficient I/O solution for large-scale machine production 530 532 533 Product overview System description Technical data 535 535
Startup Guide for Multi-axis Setup and Tuning
AC Servo System 1S-series Startup Guide for Multi-axis Setup and Tuning R88M-1L[]/-1M[] (AC Servomotors) R88D-1SN[]-ECT (AC Servo Drives) SYSMAC-SE20[][] (Automation Software) I827-E1-01 NOTE All rights
WIntroduction. Motion Control Architectures. Chuck Lewin, Founder of Performance Motion Devices
Motion Control Architectures Chuck Lewin, Founder of Performance Motion Devices WIntroduction hen engineers think of advances in motion control technology, they usually think of faster motors, improved
Scalable Motion Solutions
Scalable Motion Solutions Presenters Kevin Miller Schaedler Yesco Darryl Jacobs Rockwell Automation Copyright 2008 Rockwell Automation, Inc. All rights reserved. Agenda 1. Integrated Architecture and Motion
Supplementary Manual for the Driver Configuration 1. Please install the operation program to your PC from the attached disk or Ye Li website. Ye Li icon will appear after the installation process.
Re: request to replace Panasonic Coin-type Electric Double-Layer Capacitor with other supplier s
Device Solutions Business Division Automotive & Industrial Systems Company 4-EDLC-ckEOLe Date: 1 st April, 2018 To: Panasonic Industry Europe Re: request to replace Panasonic Coin-type Electric Double-Layer
Type 330SA High-Performance Electric Actuator
April 2000 Bulletin 61.5:330SA Type 330SA High-Performance Electric Actuator The Type 330SA High-Performance Electric Actuator (figure 1) is a high speed, high accuracy actuator that is suited for a wide
EQ5 SERIES Quick Start Guide for Constant Torque Applications
EQ5 SERIES Quick Start Guide for Constant Torque Applications PN EQ5QSCT, Revision: 0.02, April 4 th 2009 EQ5 Drive Quick Start Guide for Constant Torque Applications Contents Page Introduction... 3 1.
User Manual of 3M583
ECG-SAVEBASE EMAIL:EBAY@SAVEBASE.COM WEB: HTTP://STORES.EBAY.CO.UK/SAVEBASE User Manual of 3M583 High Performance Microstepping Driver ECG-SAVEBASE ECG Safety Statement Easy Commercial Global is not liable
Project Planning. Module 4: Practice Exercises. Academic Services Unit PREPARED BY. August 2012
Project Planning PREPARED BY Academic Services Unit August 2012 Applied Technology High Schools, 2012 Module Objectives Upon successful completion of this module, students should be able to: 1. Select
imot17xb TM-CAN INTELLIGENT SERVO MOTOR SIZE 17
imot17xb TM-CAN INTELLIGENT SERVO MOTOR SIZE 17 BRUSHLESS MOTORS WITH INTEGRATED DRIVE AND MOTION CONTROLLER FOR OEM APPLICATIONS The imot17xb TM-CAN represents the newest family of the Technosoft intelligent
DIS-2 series Decentralised servo drive
DIS-2 series Decentralised servo drive Connection types Software tools Universal in applications Rugged in use Flexible in the connection of motors and fieldbuses has developed, produced, and distributed
ASDA-B2 Servo System Quick Start Guide
ASDA-B2 Servo System Quick Start Guide This guide is intended as a quick start guide. On our website you can find also the full manual for the DELTA ASDA-B2 AC servo system, use this when getting into
SD Series. modular stepping drives. Rack mounting stepper drives with AC or DC power input. Automation. SD series features
SD modular stepping drives Rack mounting stepper drives with AC or DC power input SD drives are full/half and ministepping modules that offer high standards of performance for low to medium power applications.
SYMBOLS, UNITS AND DEFINITIONS
SYMBOLS, UNITS AND DEFINITIONS Values depending on the APPLICATION term u.m. definition A 2 [N] Thrust force on output shaft R 2 [N] Radial force on output shaft ED [min] Loading time ED% [%] Loading time
DIS-2 series Decentralised servo drive
DIS-2 series Decentralised servo drive Connection types Software tools Universal in applications Rugged in use Flexible in the connection of motors and fieldbuses has developed, produced, and distributed
Selecting Your Sigma II Indexer System
Selecting Your Sigma II System Specify part number, the indexer add-on application module. Use the tables beginning on the following page to specify choice of indexer interface cables, mating connectors
Arduino Smart Robot Car Kit User Guide
User Guide V1.0 04.2017 UCTRONIC Table of Contents 1. Introduction...3 2. Assembly...4 2.1 Arduino Uno R3...4 2.2 HC-SR04 Ultrasonic Sensor Module with Bracket / Holder...5 2.3 L293D Motor Drive Expansion
moog MSD Servo Drive Specification Option 2 - Technology Safe Tech Options
MSD Servo Drive Specification Option 2 - Technology Safe Tech Options 2 Specification Option 2 - Technology Safe Tech Options ID no.: CC23875-001, Rev. 1.0 Date: 10/2016 This document applies to: Product
Intelligent Technologies (IT.) Starter Network Adapter Products (SNAP) Product Focus D77B-DSNAP D77B-QSNAP
Intelligent Technologies (IT.) Starter Network Adapter Products (SNAP) Product Focus D77B-DSNAP D77B-QSNAP Extending the Communication Capabilities of Electromechanical Starters and Soft Starters 0 1 2
Counting On Your Process Preset Counters
Preset Counters Preset Counters Counting On Your Process Preset Counters A broad mechanical, electromechanical and electronic product line for every application requirement 118 Product Overview Preset
Mach 3 Based CNC Control Kits
Mach 3 Based CNC Control Kits Now available from Ajax CNC - Simple Mach 3 based plug and play CNC Control Kits starting at only $1795! Save time and money and do it yourself with a kit specifically designed
Blue Point Engineering
Blue Point Engineering SV203 Interface Overview Overview Sensors Light Sensor Motion Sensor Joystick Computer USB PORT Technical Pointing the Way to Solutions! T http://www.bpesolutions.com Animatronic
Square Jib. 3.5 inches Square jib 32 ft 7 Booms
3.5 3.5 Square Jib 3.5 inches Square jib 32 ft 7 Booms 1 Aesthetics-Powder coat produces a much better finish. Durability-power coating provides the most durable and long-lasting backstop finish available.
Profibus DP Expansion Board
Profibus DP Expansion Board Catalog No. EXB014A01 Installation and Operating Manual 8/03 MN1323 Table of Contents Section 1 General Information................................... 1-1 Introduction.........................................
EtherCAT SoE Interface User Manual
Documentation of the EtherCAT SoE Interface of the following Drives: - E1250-SE-UC (E1250-EC-UC) - E1450-SE-QN -0S (E1450-EC-QN-0S) - E1450-SE-QN -1S (E1450-EC-QN-1S) EtherCAT SoE Interface User Manual
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology. MDrive 34 Hybrid Step Torque Speed
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology MDrive 34 Hybrid Description MDrive Hybrid Presentation The MDrive Hybrid is a very compact motion system that solves many servo applications
SJ300 Closed loop vector control (Velocity)
SJ300 Closed loop vector control (Velocity) 1 1. Scope 1.1. The scope of this document is to provide a step-by-step procedure for setting up a SJ300 for closed loop vector control (velocity). 2. Parts
Connecting Optira Series Encoder and AgilityRH motor to Elmo Gold DC Whistle Servo Drive
TECHNICAL NOTES: INTERFACING WITH DRIVES Connecting Optira Series Encoder and AgilityRH motor to Elmo Gold DC Whistle Servo Drive TN-1303 REV 160404 1 Introduction... 3 2 Required items... 3 2.1 Optira...
SilverMax X-Series Breakout QCI-BO-X1 & QCI-BO-X1A
Date: 10 July 2017 SilverMax X-Series Breakout QCI-BO-X1 & QCI-BO-X1A www.quicksilvercontrols.com The QCI-BO-X1 is a simple breakout module for SilverMax X-Series integrated servo motors. The breakout
DMX-CFG-USB Cables (A2/ACE/K117/K23) Stepper Driver Configurator with USB 2.0 Communication
DMX-CFG-USB Cables (A2/ACE/K117/K23) Stepper Driver Configurator with USB 2.0 Communication DMX-CFG-USB Cables Manual page 1 rev 1.02 COPYRIGHT 2008 ARCUS, ALL RIGHTS RESERVED First edition, October 2008
D1Servo Drive. +7(495)
DServo Drive High speed High precision Multifunctional integration Ecology first Humanistic technology GOLD AWARD ' ' '09 '08 '0 SILVER AWARD 006, 00, 99 Ballscrews Ground/Rolled High Speed (High Dm-N
Power supply voltage Output configuration Output phases Resolution (pulses/rotation) Model. 100, 200, 360 E6A2-CWZ5C (resolution) 0.
Incremental 25-mm-dia. Rotary Encoder CSM DS_E_5_1 Compact Encoder with External Diameter of 25 mm Incremental model External diameter of 25 mm. Resolution of up to ppr. Be sure to read Safety Precautions
Chapter 8. Memory Systems. Copyright 2013 Elsevier Inc. All rights reserved.
Chapter 8 Memory Systems 1 Figure 8.1 The memory interface 2 Figure 8.2 Diverging processor and memory performance Adapted with permission from Hennessy and Patterson, Computer Architecture: A Quantitative
Panasonic B Series 12/11/04 14:40 Page 1. Panasonic B-series. Brushless geared motors with integrated drives. Lenze.
Panasonic B Series 12/11/04 14:40 Page 1 Brushless geared motors with integrated drives enze ideas in motion Panasonic B Series 12/11/04 14:41 Page 2 with integrated drive 2 Panasonic, one of the largest
Axidyne Multi-Axis System
TOL-O-MATIC Axidyne Multi-Axis System Quick Reference Set Up Guide for Wiring, Tuning, Check Out For a FREE Tol-O-Matic Hat Please Complete the Attached Reply Card & Testing 3600-425_02 SSC Servo System
SAS Overview. Rev 1.1
SAS Overview Rev 1.1 1 Kyntronics specializes in Actuation and Actuation Motion Solutions across many industries including Medical, Aerospace & Industrial. The Kyntronics team has hundreds of years of
LASER MARKING. New AREX 30W. AREX 30W Product Announcement 1/14
LASER MARKING New AREX 30W AREX 30W Product Announcement 1/14 Datalogic Industrial Automation Laser Marking has the pleasure to announce the new AREX 30W, new entry on AREX family Fiber Laser markers.
F Network-Compatible Products, Controller
F -Compatible Products, Controller -Compatible Products, Controller F-1 of Compatible Products... F-2 Modbus (RTU)-Compatible Products F-6 - Compatible Products Modbus (RTU) EtherCAT-Compatible, CC-Link-Compatible,
AC Servo Systems. SureServo Systems... 3 Standard Drives... 8 Standard Motors W to 3kW
LIVE13_tsureservo:27_tsureservo_priced.qxd 8/1/211 6:54 AM Page 16-2 AC Servo SureServo... 3 Standard... 8 Standard s... 1W to 3kW Drive features Main and Control Inputs Main : 23 VAC 1-phase/3-phase (2kW
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. h y d r a u l i c s. Hydraulics Division Eaton / Char-Lynn Hydraulic Products
H y d r a u l i c s ydraulics Hydraulics Division Eaton / Char-Lynn Hydraulic Products h y d r a u l i c s We Manufacture No. 11-895 January 1999 Solutions S o l u t i o n 1 s Experienced system design
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology. MDrive 34 Hybrid Step Torque Speed
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology MDrive 34 Hybrid Description MDrive Hybrid Presentation The MDrive Hybrid is a very compact motion system that solves many servo applications