A (1) Color Video Camera. Technical Manual EVI-D70/D70P Sony Corporation

Size: px
Start display at page:

Download "A (1) Color Video Camera. Technical Manual EVI-D70/D70P Sony Corporation"

Transcription

1 A--- () Color Video Camera Technical Manual EVI-D7/D7P Sony Corporation

2 Table of Contents Features... Connection... 4 Locations of Controls... 5 Basic Functions... 7 Initial Settings, Position Preset and Backup... 5 Mode Condition... 6 Command List... VISCA/RS-C Commands... EVI-D7/P Commands... 8 D/D Mode... 5 Overview... 5 Switching the Mode... 5 Accepting or Sending Back Commands... 5 Translating Parameters... 5 Specifications Precautions... 6

3 Overview Features An EXview HAD CCD provides 8, (EVI-D7)/ 4, (EVI-D7P) effective picture elements (pixels) enabling high-resolution imaging with this camera. The use of VISCA commands allows you to control the camera from a computer. High-speed, wide angle PAN and TILT functions and Image Flip (turning the displayed image upside down) allow the unit to be mounted on the ceiling, broadening the range of uses for this versatile camera. With the addition of external RS-C communication, RS-4 and VISCA commands provide the ability to remotely control this camera from greater distances. The lens offers an8x optical zoom feature. Use of a newly developed digital signal processor (DSP) improves the image quality of the digital zoom feature. An IF (infrared) cut filter can be physically removed. In addition, it can be switched on and off automatically, providing the best image quality for a wide range of subjects, from high resolution to brightly lit. Up to six combinations of camera position and settings can be retained in memory and called up when needed. A multi-function Remote Commander is also provided.

4 Connection Connection to VIDEO Video cable (not supplied) S-Video cable ( not supplied) to Video input to S-Video input to S VIDEO VISCA cable (not supplied) ) to VISCA RS-C IN to RS-C to VISCA RS-C OUT To VISCA IN of other EVI-D7/ D7Ps (when connecting to more than one camera) Computer, TV or VCR with a video input jack to VISCA RS-4 ) AC power adaptor MPA-AC (supplied) to AC outlet to DC IN V Power cord (supplied) ) When the camera is connected to a computer with a VISCA cable (cross type, RS-C), you can operate the camera with the computer. To obtain a cable, consult the dealer where you bought your camera. ) For more detail on the VISCA RS-4 connection, see page 5. 4

5 Locations of Controls Locations of Controls Main Unit Front Rear Bottom qf qg 9q;qaqsqd qh Lens A wide conversion lens can be attached. Sensor for the Remote Commander POWER lamp 4 STANDBY lamp 5 Sensor for the Remote Commander 6 IMAGE FLIP switch Flips the image upside down. Normally set this to OFF when you use the camera. When the camera is attached to the ceiling, set this to ON. When you switch this, the pre-set setting is returned to the initial setting. It takes about 7 seconds for the image displayed to respond to the setting change. 7 IR SELECT switch 8 VISCA RS-4 connector A VISCA RS-4 connector plug is attached to the unit at the factory. 9 VIDEO jack S VIDEO jack qa VISCA RS-C IN jack qs VISCA RS-C OUT jack qd DC IN V jack qf Tripod screw hole qg DIP switch Used to switch between RS-C and RS-4, to switch between D and D modes, to make the IR OUT output setting, or switch between speeds of or between speeds of 96 bps or 8,4 bps. qh Ceiling bracket mounting screw holes. 5

6 Locations of Controls Remote Commander POWER CAMERA SELECT FOCUS AUTO MANUAL FAR NEAR DATA SCREEN BACK LIGHT STD REV PRESET RESET POSITION PAN-TILT 4 5 T W L/R DIRECTION SET HOME SLOW ZOOM FAST T W RM-EV PAN-TILT RESET 9 q; CAMERA SELECT buttons FOCUS buttons AUTO button FAR button NEAR button MANUAL button DATA SCREEN button When the DATA SCREEN button is pushed, the camera status is displayed when you are using the Zoom or Manual Focus functions. DATA SCREEN can be set to ON or OFF, and memorized, only with POSITION. When POSITION is recalled, the memorized DATA SCREEN status is used. 4 PAN-TILT button Arrow buttons HOME button 5 L/R DIRECTION SET button 6 POWER switch 7 BACK LIGHT button 8 POSITION buttons Numeric buttons (Button also works as the STD button. Button also works as the REV button.) PRESET button RESET button 9 PAN-TILT RESET button ZOOM buttons SLOW T button SLOW W button FAST T button FAST W button 6

7 Basic Functions Basic Functions Zoom The FCB camera employs an 8 optical zoom lens combined with a digital zoom function allowing you to zoom up to. Lens specifications: Optical 8, f = 4. to 7.8 mm (F.4 to F.) The horizontal angle of view is approximately 48 degrees (wide end) to.8 degrees (tele end). Digital Zoom enlarges the center of the subject by expanding each image in both the vertical and horizontal directions. When zoom is used, the number of effective picture elements in each direction reduces to / and the overall resolution deteriorates. You can activate the zoom in the following two ways: By pressing the TELE or WIDE buttons on the camera itself. Using a VISCA Command Using Standard Mode Using Variable Mode There are eight levels of zoom speed. Direct Mode Setting the zoom position enables quick movement to the designated position. Digital Zoom ON/OFF In these standard and variable Speed Modes, it is necessary to send a Stop Command to stop the zoom operation. The Zoom Mode supports a Combined Mode and a Separate Mode. Combined Mode This is the previously existing zoom method. After the optical zoom has reached its maximum level, the camera switches to Digital Zoom Mode. Separate Mode In this mode, Optical Zoom and Digital Zoom can be operated separately. You can use digital zoom magnification at any time from within any level of optical magnification. Focus Focus has the following modes, all of which can be set using VISCA Commands. Auto Focus Mode The minimum focus distance is mm at the optical wide end (extreme close-up settings with VISCA control) and 8 mm at the optical tele end (distance from the front end of the lens), and is independent of the digital zoom. The AutoFocus (AF) function automatically adjusts the focus position to maximize the high frequency content of the picture in a center measurement area, taking into consideration the high luminance and strong contrast components. - Normal AF Mode This is the normal mode for AF operations. - Interval AF Mode The mode used for AF movements carried out at defined intervals. The time intervals for AF movements and for the timing of the stops can be set in one-second increments using the Set Time Command. The initial value for both is set to five seconds. - Zoom Trigger Mode When the zoom is changed with the TELE or the WIDE buttons, the pre-set value (initially set at 5 seconds) becomes that for AF Mode. Then, it returns to Manual Focus mode. AF sensitivity can be set to either HIGH or LOW. - HIGH Reaches the highest focus speed quickly. Use this when shooting a subject that moves frequently. Usually, this is the most appropriate mode. - LOW Improves the stability of the focus. When the lighting level is low, the AF function does not take effect, even though the brightness varies, contributing to a stable image. 7

8 Basic Functions To avoid AF error from continuous 4 hour AF mode usage, daily initialization of lens system using the CAM_Initialize command is recommended. The CAM_Initialize command takes less than seconds to initialize the focus and zoom. Manual Focus Mode Manual Focus has both a Standard Speed Mode and a Variable Speed Mode. Standard Speed Mode focuses at a fixed rate of speed. Variable Speed Mode has eight speed levels that can be set using a VISCA Command. One Push Trigger Mode When a Trigger Command is received, the lens moves to adjust the focus for the subject. The focus lens then holds the same position until the next Trigger Command is input. Infinity Mode The lens is forcibly moved to a position suitable for an unlimited distance. Near Limit Mode Can be set in a range from ( ) to C ( mm). The focus range is narrowed by excluding the unnecessary range. White Balance White Balance has the following modes, all of which can be set using VISCA Commands. Auto White Balance This mode computes the white balance value output using color information from the entire screen. It outputs the proper value using the color temperature radiating from a black subject based on a range of values from to 75K. This mode is the default setting. ATW Auto Tracing White balance ( to K) Indoor K Base Mode Outdoor 58 K Base Mode One Push WB The One Push White Balance mode is a fixed white balance mode that may be automatically readjusted only at the request of the user (One Push Trigger), assuming that a white subject, in correct lighting conditions and occupying more than / of the image, is submitted to the camera. One Push White Balance data is lost when the power is turned off. If the power is turned off, reset the One Push White Balance. Manual WB Manual control of R and B gain, 56 steps each Automatic Exposure Mode The variety of AE functions, which allow video signal to output the optimum image for subjects from low light conditions to bright light conditions, are available. Full Auto Auto Iris and Gain, Fixed Shutter Speed (NTSC: /6 s, PAL: /5 s) Shutter Priority ) Variable Shutter Speed, Auto Iris and Gain ( / to /, s, steps, std. shutter: 6 steps, slow shutter: 6 steps) Iris Priority Variable Iris (F.4 to Close, 8 steps), Auto Gain and Shutter speed. Manual Variable Shutter, Iris and Gain. Bright Variable Iris and Gain (Close to F.6, 7 steps at db: F.4, 5 steps from to 8 db)... ) Flicker can be eliminated by setting shutter to: t / s for PAL models used in countries with a 6 Hz power supply t / s for NTSC models used in countries with a 5 Hz power supply frequency. frequency. 8

9 Basic Functions AE Shutter Priority The shutter speed can be set freely by the user to a total of steps 6 high speeds and 6 low speeds. When the slow shutter is set, the speed can be /, /5, /8, or /4 s. The picture output is read at a normal rate from the memory. The memory is updated at a low rate from the CCD. AF capability is low. In high speed mode, the shutter speed can be set up to /, s. The iris and gain are set automatically, according to the brightness of the subject. Data NTSC PAL F E 75 6 D 5 45 C 5 B 5 5 A a) a) a) For AE-Manual only. Note When the shutter speed / s or / s is used, Auto Focus and White Balance may not function fully. AE Iris Priority The iris can be set freely by the user to 8 steps between F.4 and Close. The gain and shutter speed are set automatically according to the brightness of the subject. Data Setting value Data Setting value F.4 8 F6.8 F.7 F8. F F. 6 F9.6 E F.4 5 F D F.8 4 F4 C F.4 F6 B F4. F9 A F4.8 F 9 F5. CLOSE AE Manual The shutter speed ( steps), iris (8 steps) and gain (6 steps) can be set freely by the user. AE Bright The bright control function adjusts both the gain and iris using an internal algorithm according to a brightness level freely set by the user. Exposure is controlled by gain when dark and by iris when bright. As both gain and iris are fixed, this mode is used when exposing at a fixed camera sensitivity. When switching from Full Auto or Shutter Priority Mode to Bright Mode, the current status will be retained for a short period of time. Only when the AE mode is set to Full Auto or Shutter Priority, the user can switch it to Bright. IRIS Gain AGC OPEN MAX CLOSE MIN Dark Controlled by gain Gain curve IRIS curve Controlled by IRIS Bright limit which controllable for this unit Bright Data Iris Gain Data Iris Gain F F.4 8 db F F. db E F.4 6 db E F.4 db D F.4 4 db D F.8 db C F.4 db C F.4 db B F.4 db B F4. db A F.4 8 db A F4.8 db 9 F.4 6 db 9 F5. db 8 F.4 4 db 8 F6.8 db 7 F.4 db 7 F8. db 6 F.4 db 6 F9. db 5 F.4 8 db 5 F db 4 F.4 6 db 4 F4 db F.4 4 db F db F.4 db F9 db F.4 db F db F. db CLOSE db 9

10 Basic Functions When switching from the Shutter Priority mode to the Bright mode, the shutter speed set in the Shutter Priority mode is maintained. Spot Exposure Mode In Full Auto AE, the level for the entire screen is computed and the optimum Auto Iris and Gain levels are determined. In Spot AE, a particular section of the subject can be designated, and then that portion of the image can be weighted and a value computed so that Iris and Gain can be optimized to obtain an image. For example, in an image with a lot of movement and with varying levels of brightness, portions without much change can be designated as such a spot, and changes to the screen can be minimized in that area. As shown in the diagram below, a range of 6 blocks vertically and 6 blocks horizontally can be designated. In the case where the center is designated (shown in black), the level is computed along with a weighted value for the surrounding block (shaded), including the specified portions; and then the Gain and Iris are set. The value of the designated portions and the surrounding areas should be calculated as 9% and the rest should be set to %. Exposure Compensation Exposure compensation is a function which offsets the internal reference brightness level used in the AE mode by steps of.5 db. Data Step Setting value E 7.5 db D 6 9 db C db B 4 6 db A 4.5 db 9 db 8.5 db db 6.5 db 5 db db 4 6 db db 6 9 db 7.5 db Aperture Control Vertical A B C D E F Horizontal A B C D E F Aperture control is a function which adjusts the enhancement of the edges of objects in the picture. There are 6 levels of adjustment, starting from no enhancement. When shooting text, this control may help by making the text sharper. Back Light Compensation When the background of the subject is too bright, or when the subject is too dark due to shooting in the AE mode, back light compensation will make the subject appear clearer. Slow Shutter Auto/Manual When the Slow Shutter is set to Auto, this ensures that the slow shutter is engaged automatically when the brightness drops. This occurs only when the AE mode is set to Full Auto. Slow Shutter Manual is the factory setting. ICR (IR Cut-Removable) Mode An infrared (IR) Cut-Filter can be disengaged from the image path for increased sensitivity in low light environments. The ICR will automatically engage depending on the ambient light, allowing the camera to be effective in day/night environments.

11 Basic Functions Auto ICR Mode Auto ICR Mode automatically switches the settings needed for attaching or removing the IR Cut Filter. With a set level of darkness, the IR Cut Filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a set level of brightness, the IR Cut Filter is automatically enabled (ICR OFF). Also on systems equipped with an IR light, the internal data of the camera is used to make the proper decisions to avoid malfunctions. When Auto Slow Shutter is OFF (PRESLOW mode ON (default) or OFF) (Iris Open) (Gain Max) ICR ON ICR ON AGC MAX GAIN IRIS OPEN IRIS Note When in Auto_ICR_OFF state and WB data is added (default), a malfunction may occur when the subjects largely consisting of blue and red colors are taken. Auto ICR is available in AE-full-auto state only. Camera ID The ID can be set up to 65,56 ( to FFFF). As this will be memorized in the nonvolatile memory inside the camera, data will be saved regardless of whether it has been backed up. Effect It consists of the following functions. Neg. Art: Negative/Positive Reversal Black White: Monochrome Image Dark Adjustable ICR ON t OFF Adjustable SHUTTER Bright (Iris Min) (db) (/6 sec) Others E-FLIP This function turns the video output from the camera upside down. When Auto Slow Shutter is ON (PRESLOW mode OFF) (Iris Open) (Gain Max) ICR ON (Slow Shutter Max) ICR ON AGC MAX GAIN Adjustable IRIS OPEN SHUTTER IRIS (Iris Min) (db) (/6 sec) Mirror Image This function reverses the video output from the camera horizontally. Freeze This function captures an image in the field memory of the camera so that this image can be output continuously. Because communication inside the camera is based on V cycle, the captured image is always the one V to 4Vs after the sending of a Command. Thus, you can not specify a time period after sending EVEN, ODD or a Command. Dark ICR ON t OFF Adjustable When Auto Slow Shutter is ON (PRESLOW mode ON (default)) Dark ICR ON ICR ON (Iris Open) (Gain Max) (Slow Shutter Max) AGC MAX GAIN Adjustable IRIS OPEN ICR ON t OFF Adjustable SHUTTER IRIS Bright Bright (Iris Min) (db) (/6 sec) Commands Power On/Off Powers the camera on and off. When the power is off, the camera is able to accept only the lowest level of VISCA Commands; the display and other features are turned off. I/F clear Clears the Command buffer of the FCB camera. Clearing the buffer can also be carried out from the control application software when the power is on. Address set VISCA is a protocol, which normally can support a daisy chain of up to seven attached devices. Therefore, whenever a camera is connected for the first time, be sure to use the address set to confirm the address.

12 Basic Functions ID Write Sets the camera ID. Mute Blanks the screen and sends out a synchronizing signal. Lens Initialization Initializes the zoom and focus of the lens. Even when power is already on, it initializes the zoom and the focus. AutoPowerOff If an operation is not attempted via either a VISCA command or the remote controller during a pre-set time period (from to 65,55 minutes), the power will automatically turn off (Standby). To disable this function, set the time period to minutes. White Balance Mode R/B Gain Aperture ICR Shoot On/Off The settings are recalled when the power is turned on. For setting items, see the Initial Settings, Position Preset and Backup section on page 5. Alarm For details, see page. NightPowerOff When the Alarm function operates in DayNight mode, and the unit judges that it is night, if an operation is not attempted via either a VISCA command or the remote controller during a pre-set time period (from to 65,55 minutes), the power will automatically turn off (Standby). To disable this function, set the time period to minutes. When the DayNight level is set correctly (the Day level > the Night level), the Alarm function can only be set when the unit is operated in DayNight mode. AutoPowerOff and NightPowerOff can be used at the same time. However, if the criteria for both are fulfilled at the same time, the shorter of the two time periods until shut down will be used to turn the power off (Standby). Memory (Position Preset) Using the position preset function, 6 sets of camera shooting conditions can be stored and recalled. This function allows you to achieve the desired status instantly even without adjusting the following items each time: Zoom Position Digital Zoom On/Off Focus Auto/Manual Focus Position AE Mode Shutter control parameters Bright Control Iris control parameters Gain control parameters Exposure Compensation On/Off Exposure Level Backlight Compensation On/Off Slow Shutter Auto/Manual

13 Basic Functions Title Display The camera can be given a title containing up to characters such as ENTRANCE or LOBBY. The position of the first character (horizontal, vertical) of the title, blinking state, and color can also be changed. Vposition to A Hposition to 7 Blink : Does not blink : Blinks White Yellow Violet Color Red 4 Cyan 5 Green 6 Blue 4 7 A B C D E F G H 8 9 a b c d e f I J K L M N O P Q R S T U V W X 8 9 a b c d e f Y Z &?! a b c d e f À È Ì Ò Ù Á É Í Ó Ú Â Ê Ô Æ Œ à 8 9 a b c d e f Õ Ñ Ç ß Ä Ï Ö Ü Å $ F DM a 4b 4c 4d 4e 4f ø :., / - Alarm Function This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. A High level signal is output when camera detects movement inside the monitoring area. A Low level signal is output when object stops moving. However, when the mode is set to DAY/NIGHT, the High level signal is output for dark and the Low level signal is output for bright. The Detect signal goes out through the serial command (VISCA) communication line. Example. A door is motionless, so the Detect Level is Low.. At the moment when the door is opened by someone, the Detect Level goes to High.. The Detect Level is High while the shooting object is moving. 4. When the door is closed, Detect Level goes to Low again, or signals are output only once at the time of switching between High Level and Low Level.

14 Basic Functions ALARM Setting Command List Command Set Command Command Packet Comments CAM _ Alarm On 8x 4 6B FF MD start Off 8x 4 6B FF MD stop Set Mode 8x 4 6C pp FF Mode Setting *Select one from modes Set Day Night Level 8x 4 6D p p p ppp: Day distinction AE level q q q FF qqq: Night distinction AE level B FF High signal output (Low t High edge) 9 4 6B FF Low signal output (High t Low edge) VISCA Mode Code (pp) Details of Mode Set the internal focus position. When focus movement is detected, the detect signal is High. When focus goes back to the previous position, the detect signal is Low. Set a fixed period of time. When focus does not move during the time, the focus position is memorized as a rest position and the detect signal is Low. When focus moves, the detect signal is High. Afterwards when focus does not move for the fixed period of time, the focus position is memorized and the detect signal becomes Low. Set the internal AE Level. When AE movement is detected, the detect signal is High. When AE Level goes back to the previous level, the detect signal is Low. Set a fixed period of time. When AE Level does not change during this time, the AE value is memorized as a rest value and the detect signal is Low. When AE value changes, the detect signal is High. Afterwards when AE value does not change for the fixed period of time, the AE value is memorized and the detect signal becomes Low. 4 mode and mode 5 mode and mode 6 mode and mode 7 mode and mode 8 mode or mode 9 mode or mode A mode or mode B mode or mode C Day-Night Mode ALARM Inquiry Command List Inquiry Command Command Packet Inquiry Packet Comments CAM _ Alarm Inq 8x 9 4 6B FF y 5 FF On y 5 FF Off CAM _ Alarm Mode Inq 8x 9 4 6C FF y 5 pp FF pp: Alarm Mode CAM_AlarmDayNightLevel Inq 8x 9 4 6D FF y 5 p p p ppp: Day setting AE Level q q q r r r FF qqq; Night setting AE Level rrr: Now AE Level CAM_AlarmDetLevelInq 8x 9 4 6E FF y 5 FF Detect Level is High. y 5 FF Detect Level is Low. 4

15 Basic Functions Flowchart of Modes Function Mode Set the Focus Position Hysteresis. Set to the factory preset Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. High level signal output * * Repeat this loop until Alarm off. Focus goes back to the previous position. Low level signal output Far Focus Position Hysteresis Near Low High 5

16 Basic Functions Mode Alarm On Focus Position into memory Hysteresis is set to the factory preset. AE moves. Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the Focus position data. 6

17 Basic Functions Mode Set the AE level Hysteresis. Set to the factory preset Alarm On AE Level into memory AE moves AE moves outside of the hysteresis. High level signal output * * Repeat this loop until Alarm off. AE goes back to the previous level. Low level signal output Bright AE Level Hysteresis Dark Low High 7

18 Basic Functions Mode Alarm On AE level into memory Hysteresis is set to the factory preset. AE moves. AE moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the AE level data 8

19 Basic Functions Details of Mode / T: Reset interval timer (5sec) T: Detect timer (sec) T: High level signal count timer (sec) Alarm ON Hysteresis Focus Pos AE Level Reset Reset Reset Reset T T T T T High Signal level Low Low T: T: T: 9

20 Basic Functions Mode 4 The same flow for the low level signal High output result of mode High output result of mode High output Mode 5 The same flow for the low level signal High output result of mode High output result of mode High output

21 Basic Functions Mode 6 The same flow for the low level signal High output result of mode High output result of mode High output Mode 7 The same flow for the low level signal High output result of mode High output result of mode High output

22 Basic Functions Mode 8 The same flow for low level signal High output result of mode High output result of mode High output result of mode High output High output High output Mode 9 The same flow for low level signal High output result of mode High output result of mode High output result of mode High output High output High output

23 Basic Functions Mode A The same flow for low level signal High output result of mode High output result of mode High output result of mode High output High output High output Mode B The same flow for low level signal High output result of mode High output result of mode High output result of mode High output High output High output

24 Basic Functions Day-Night Mode (Mode C ) Set the Day-Night Mode and the Day/ Night AE level. Setting by the VISCA Cmd. Alarm On Starting distinction between Day and Night. AE move Yes Brightness is higher than Day AE level No Yes No High level signal output Brightness is higher than Night AE level No Yes Yes Low level signal output Low level signal output Yes No High level signal output Bright Day AE level Hysteresis Night AE level Dark High Setting the period time t to the factory preset Signal level Low Low 4

25 Basic Functions Initial Settings, Position Preset and Backup Initial settings for the various functions are indicated in the Initial settings column. Mode/Position Initial settings Position preset Pan/Tilt Position Home position a Pan/Tilt Limit Position movable-range maximum a Zoom Position Wide end a D-Zoom On/Off On a D-Zoom Separate/Combine Combine a D-Zoom Position h a Focus Position a Focus Auto/Manual Auto a Near Limit Setting 8h (9cm) a AF Sensitivity Normal a AF Mode Normal a AF Run Time 5 sec a AF Interval 5 sec a WB Mode a) Auto a WB Data (Rgain, Bgain) a One Push WB Data a AE Mode Full Auto a Slow Shutter Mode Manual a Shutter Position /6sec (NTSC), /5sec (PAL) a Iris Position a Gain Position a Bright Position a Exposure Compensation On/Off Off a Exposure Compensation Amount ± a Backlight On/Off Off a Spot AE On/Off Off a Spot AE Position Setting X=8, Y=8 a Aperture Level 5 a IR_Receive On/Off On a IR_ReceiveReturn On/Off Off a Auto Power Off Timer a Night Power Off Timer a LR Reverse On/Off Off a Freeze On/Off Off Picture Effect Off a ICR On/Off Off a Auto ICR On/Off Off a Camera Memory Same as the initial value setting a Display On/Off Off a Mute On/Off Off Title Display On/Off Off a Title Setting a Alarm On/Off Off a Alarm Mode a Alarm Detect Level a Key Lock On/Off Off a Camera ID h a Note The number of times data can be written to EEPROM (by executing Preset) is limited. 5

26 Basic Functions Mode Condition Condition Mode Power Off Initializing Power On Freeze On MemRecall Address Set a a a a a IF_Clear a a a a a Command Cancel a a a a a Power On/Off a a a a a Lens Mode Power Off Initializing Power On Freeze On MemRecall Zoom Direct Focus Direct ZmFo Direct Focus Auto Zoom Tele/Wide/Stop a a a Zoom Direct a a a a Zoom Focus Direct a a D-Zoom On/Off a a a D-Zoom Separate/Combine a a a D-Zoom Tele/Wide/Stop a a a a a D-Zoom /Max a a a a a D-Zoom Direct a a a a a Focus Far/Near/Stop a a Focus Direct a a a Focus Auto/Manual a a a One Push AF a a Focus Infinity a a a Focus Near Limit a a a AF Sensitivity Normal/Low a a a a a AF Mode Norm/Interval/Zoom a a a a a AF Activation Time/Interval Setting a a a a a Lens Initialization a a a a) during recalling from key 6

27 Basic Functions White Balance Mode Power Off Initializing Power On Freeze On MemRecall WB AUTO Indoor Outdoor OnePush ATW Manual WB Mode Switchover a a a a a a a One Push WB a a RGain Setting a a BGain Setting a a Exposure Mode Power Off Initializing Power On Freeze On MemRecall AE Full Auto AE Manual ShutterPriority Iris Priority Bright AE Full Auto a a a a a a AE Manual a a a a a a Shutter Priority a a a a a a Iris Priority a a a a a a Bright a a a a Shutter Setting a a a Iris Setting a a a Gain Setting a a Bright Setting a a Slow Shutter Auto/Manual a a a a a a Exposure Compensation On/Off a a a a a a Exposure Compensation Setting a a a a a a Backlight On/Off a a SpotAE On/Off a a a a a a SpotAE Setting a a a a a a 7

28 Basic Functions Others Mode Power Off Initializing Power On Freeze On MemRecall Aperture Setting a LR_Reverse On/Off a Freeze On/Off a a Picture Effect Setting a ICR On/Off a Auto ICR On/Off a Display On/Off a a a Mute On/Off a a a Title Setting a a a Key Lock On/Off a a a ID Write a a a 8

29 Basic Functions Mode Condition 7 (Pan/Tilt, Memory Function) Mode Pan/Tilt movement Command Transmit device Power OFF IFC Freeze On Zoom Focus (manual) Up/Down/Left/ Right/UpLeft/ UpRight/ DownLeft/ DownRight Common Common VISCA RC VISCA VISCA VISCA RC VISCA RC VISCA RC Pan-tiltDrive Up/Down/Left/ VISCA a a a a a a Right/UpLeft/UpRight/ DownLeft/DownRight RC a a a a Absolute Position Relative Position Home Reset Memory Recall execution Initializing adjustment Position detection error Pan-tiltDrive Stop VISCA a a a a a Pan-tiltDrive AbsolutePosition VISCA a a a a a a Pan-tiltDrive RelativePosition VISCA a a a a Pan-tiltDrive Home Pan-tiltDrive Reset VISCA a a a a RC a a a a VISCA a a a a RC a a a a Pan-tiltDrive LimitSet VISCA a a a Pan-tiltDrive LimitClear VISCA a a a Memory Set Common a ) Memory Reset Common a Memory Recall VISCA a 4) ) ) a a a a RC a 4) ) ) a a a ): a while the camera operates in the Tele/Wide zoom mode ): a while the camera operates in the Far/Near focus mode ): Freeze is set as off, and the setting is Memory Set. 4): Freeze is set as off, and the setting is Memory Recall. 9

30 Command List Command List VISCA ) /RS-C Commands Use of RS-C control software which has been developed based upon this command list may cause malfunction or damage to hardware and software. Sony Corporation is not liable for any such damage. Overview of VISCA In VISCA, the side outputting commands, for example, a computer, is called the controller, while the side receiving the commands, such as an EVI-D7/P, is called the peripheral device. The EVI-D7/P serves as a peripheral device in VISCA. In VISCA, up to seven peripheral devices like the EVI-D7/P can be connected to one controller using communication conforming to the RS-C standard. The parameters of RS-C/4 are as follows. Communication speed: 96 bps/84 bps Data bits : 8 Start bit : Stop bit : Non parity MSB first Flow control using XON/XOFF and RTS/CTS, etc., is not supported. Peripheral devices are connected in a daisy chain. As shown in Fig., the actual internal connection is a onedirection ring, so that messages return to the controller via the peripheral devices. The devices on the network are assigned addresses. The address of the controller is fixed at. The addresses of the peripheral devices are,,... in order, starting from the one nearest the controller. The address of the peripheral device is set by sending address commands during the initialization of the network. The VISCA devices each have a VISCA IN and VISCA OUT connector. Set the DTR input (the S output of the controller) of VISCA IN to H when controlling VISCA equipment from the controller. VISCA Controller Fig. VISCA network configuration VISCA Equipment IN OUT IN OUT IN OUT... )VISCA is a protocol which controls consumer camcorders developed by Sony. VISCA is a trademark of Sony Corporation.

31 Command List VISCA Communication Specifications VISCA packet structure The basic unit of VISCA communication is called a packet (Fig. ). The first byte of the packet is called the header and comprises the sender s and receiver s addresses. For example, the header of the packet sent to the EVI-D7/P assigned address from the controller (address ) is hexadecimal 8H. The packet sent to the EVI-D7/P assigned address is 8H. In the command list, as the header is 8X, input the address of the EVI-D7/P at X. The header of the reply packet from the EVI-D7/P assigned address is 9H. The packet from the EVI-D7/P assigned address is AH. Some of the commands for setting EVI-D7/P units can be sent to all devices at one time (broadcast). In the case of broadcast, the header should be hexadecimal 88H. When the terminator is FFH, it signifies the end of the packet. Packet ( to 6 bytes) Header Message ( to 4 bytes) Terminator Byte Byte Byte FF Sender s address Receiver s address Bit 7 (MSB) Bit 6 Bit 5 Bit 4 Bit Bit Bit Bit (LSB) Bit 7 Bit 6 Bit 5 Bit 4 Bit Bit Bit Bit (MSB) (LSB) Fig. Packet structure Timing Chart As VISCA Command processing can only be carried out one time in a Vertical cycle, it takes the maximum V cycle time for an ACK/Completion to be returned. If the Command ACK/Completion communication time can be cut shorter than thev cycle time, then every V cycle can receive a Command. General Commands RxD TxD Command Within 6.7msec(msec*PAL) ACK Completion Command and inquiry Command Sends operational commands to the EVI-D7/P. Inquiry Used for inquiring about the current state of the EVI-D7/P. Command Packet Note Inquiry 8X QQ RR... FF QQ ) = Command/Inquiry, RR ) = category code ) QQ = (Command), 9 (Inquiry) ) RR = (Interface), 4 (camera ), 6 (Pan/Tilter) X = to 7: EVI-D7/P address Query Commands RxD Within 6.7msec(msec*PAL) Command Completion TxD 6 Byte

32 Command List Responses for commands and inquiries ACK message Returned by the EVI-D7/P when it receives a command. No ACK message is returned for inquiries. Completion message Returned by the EVI-D7/P when execution of commands or inquiries is completed. In the case of inquiry commands, it will contain reply data for the inquiry after the rd byte of the packet. If the ACK message is omitted, the socket number will contain a. Command execution cancel To cancel a command which has already been sent, send the Cancel command as the next command. To cancel one of any two commands which have been sent, use the cancel message. Cancel Packet Note Cancel 8X Y FF Y = socket number X = to 7: EVI-D7/P address, Y = socket number The Command canceled error message will be returned for this command, but this is not a fault. It indicates that the command has been canceled. Reply Packet Note Ack X 4Y FF Y = socket number Completion (commands) X 5Y FF Y = socket number Completion (Inquiries) X 5Y... FF Y = socket number X = 9 to F: EVI-D7/P address + 8 Error message When a command or inquiry command could not be executed or failed, an error message is returned instead of the completion message. Error Packet Description X 6Y FF Message length error (>4 bytes) X 6Y FF Syntax Error X 6Y FF Command buffer full X 6Y 4 FF Command cancelled X 6Y 5 FF No socket (to be cancelled) X 6Y 4 FF Command not executable X = 9 to F: EVI-D7/P address + 8, Y = socket number Socket number When command messages are sent to the EVI-D7/P, it is normal to send the next command message after waiting for the completion message or error message to return. However to deal with advanced uses, the EVI-D7/P has two buffers (memories) for commands, so that up to two commands including the commands currently being executed can be received. When the EVI-D7/P receives commands, it notifies the sender which command buffer was used using the socket number of the ACK message. As the completion message or error message also has a socket number, it indicates which command has ended. Even when two command buffers are being used at any one time, an EVI-D7/P management command and some inquiry messages can be executed. The ACK message is not returned for these commands and inquiries, and only the completion message of socket number is returned.

33 Command List VISCA Device Setting Command Before starting control of the EVI-D7/P, be sure to send the Address command and the Cancel command using the broadcast function. For VISCA network administration Address Sets an address of a peripheral device. Use when initializing the network, and receiving the following network change message. Network Change Sent from the peripheral device to the controller when a device is removed from or added to the network. The address must be re-set when this message is received. Packet Note Address 88 FF Always broadcasted. Network Change X 8 FF X = 9 to F: EVI-D7/P address + 8 VISCA interface command Cancel Clears the command buffers in the EVI-D7/P and cancels the command currently being executed. Command Packet Reply Packet Note Cancel 8X FF X 5 FF Cancel (broadcast) 88 FF 88 FF X = to 7: EVI-D7/P address (For inquiry packet) X = 9 to F: EVI-D7/P address +8 (For reply packet) VISCA interface and inquiry IF_DeviceTypeInq Returns information on the VISCA interface. Inquiry Inquiry Packet Reply Packet Description IF_DeviceTypeInq 8X 9 FF Y 5 GG GG HH HH JJ JJ KK FF GGGG = Vender ID (: Sony) HHHH = Model ID 4: EVI-D/D (When the D/D mode is set to ON) 4E: EVI-D7/P JJJJ = ROM revision KK = Maximum socket # () X = to 7: EVI-D7/P address (For inquiry packet) X = 9 to F: EVI-D7/P address +8 (For reply packet)

34 Pin assignment EVI-D7/P. DTR. DSR. TXD 4. GND 5. RXD 6. GND 7. IR OUT 8. N.C. Command List Windows D-sub 9 pin. CD. RXD. TXD 4. DTR 5. GND 6. DSR 7. RTS 8. CTS 9. RI No Pins Signals DTR DataTransmission Ready (OUTPUT) DSR Data Set Ready (INPUT) TXD Transmit Data (OUTPUT) 4 GND Ground 5 RXD Receive Data (INPUT) 6 GND Ground VISCA IN 7 IR OUT IR Commander Signal (OUTPUT) 8 N.C. No Connection IR OUT outputs the signals of the Remote Commander at to 5 V when the IR OUT switch is set to ON. When the switch is set to OFF, signals input to the VISCA IN jack are output through the VISCA OUT jack. EVI-D7/P. DTR. DSR. TXD 4. GND 5. RXD 6. GND 7. IR OUT 8. N.C. EVI-D7/P. DTR. DSR. TXD 4. GND 5. RXD 6. GND 7. IR OUT 8. N.C. EVI or Macintosh. DTR. DSR. TXD 4. GND 5. RXD 6. GND 7. OPEN 8. OPEN Windows D-sub 5 pin. FG. TXD. RXD 4. RTS 5. CTS 6. DSR 7. GND. DTR 4

35 Command List Using the VISCA RS-4 connector pin assignments The VISCA RS-4 connector pin assignments Insert a wire (AW G Nos. 8 ~ 8) into the desired wire opening on the plug, and tighten the screw for that wire using a flat-head screwdriver. Wire VISCA RS-4 Pin No. Function TXD IN+ TXD IN RXD IN+ 4 RXD IN 5 GND 6 TXD OUT+ 7 TXD OUT 8 RXD OUT+ 9 RXD OUT Flat-head screwdriver Insert the VISCA RS-4 connector plug into the VISCA RS-4 connector on the back of the camera Using the VISCA RS-4 connector plug Grasp both ends of the VISCA RS-4 connector plug and pull it away from the rear panel of the camera, as shown in the illustration. Note In order to stabilize the voltage level of the signal, connect both ends to GND

36 Command List VISCA Command/ACK Protocol Command Command Message Reply Message General Command FF 9 4 FF (ACK)+9 5 FF (Example) (Completion) 9 4 FF 9 5 FF FF 9 6 FF (Syntax Error) (Example) FF 9 6 FF (Example) (Command Buffer Full) FF FF (Example) (Command Not Executable) 9 6 4FF Inquiry Command FF 9 5 FF (Completion) (Example) FF 9 6 FF (Syntax Error) (Example) Address Set 88 FF 88 FF IF_Clear(Broadcast) 88 FF 88 FF IF_Clear (For x) 8x FF z 5 FF (Completion) Command Cancel 8x y FF z 6y 4 FF (Command Canceled) z 6y 5 FF (No Socket) Comments Returns ACK when a command has been accepted, and Completion when a command has been executed. Accepted a command which is not supported or a command lacking parameters. There are two commands currently being executed, and the command could not be accepted. Could not execute the command in the current mode. ACK is not returned for the inquiry command. Accepted an incompatible command. Returned the device address to +. Returned the same command. ACK is not returned for this command. Returned when the command of the socket specified is canceled. Completion for the command canceled is not returned. Returned when the command of the specified socket has already been completed or when the socket number specified is wrong. 6

37 Command List VISCA Camera-Issued Messages ACK/Completion Messages ACK Completion z = Device address + 8 Command Messages z 4y FF (y:socket No.) z 5y FF (y:socket No.) Comments Returned when the command is accepted. Returned when the command has been executed. Error Messages Syntax Error Command Buffer Full Command Canceled No Socket Command Not Executable Command Messages z 6 FF z 6 FF z 6y 4 FF (y:socket No.) z 6y 5 FF (y:socket No.) z 6y 4 FF (y:socket No.) Comments Returned when the command format is different or when a command with illegal command parameters is accepted. Indicates that two sockets are already being used (executing two commands) and the command could not be accepted when received. Returned when a command which is being executed in a socket specified by the cancel command is canceled. The completion message for the command is not returned. Returned when no command is executed in a socket specified by the cancel command, or when an invalid socket number is specified. Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus. Network Change Message Network Change Command Message z 8 FF Comments Issued when power is being routed to the camera, or when the VISCA device is connected to or disconnected from the VISCA OUT jack. 7

38 Command List EVI-D7/P Commands EVI-D7/P Command List (/4) Command Set Command Command Packet Comments AddressSet Broadcast 88 FF IF_Clear Broadcast 88 FF CommandCancel 8x p FF p: Socket No.(=or) CAM_Power On 8x 4 FF Power ON/OFF Off 8x 4 FF CAM_AutoPowerOff Direct 8x 4 4 p q r s FF Auto Power Off pqrs: Power Off Timer (Timer Off) to FFFF (6555min) Initial value: The power automatically turns off if the camera does not receive any VISCA commands or any signals from the Remote Commander for the duration you set in the timer. CAM_NightPoweroff Direct 8x 4 4 p q r s FF Pqrs: Power Off Timer ~FFFF (Units: Min.) A setting of (zero min.) is equivalent to OFF, and the smallest value that can be set is min. When the Day/Night function is in effect and the Night setting has been made, if an operation is not attempted via either a VISCA command or the remote controller, the unit will continue to operate for the time set in the timer, and will then shut off automatically. CAM_Zoom Stop 8x 4 FF Tele(Standard) 8x 4 FF Wide(Standard) 8x 4 FF Tele(Variable) 8x 4 7 p FF p= (Low) to 7 (High) Wide(Variable) 8x 4 7 p FF Direct 8x 4 4p q r s FF pqrs: Zoom Position CAM_DZoom On 8x 4 FF Digital zoom ON/OFF Off 8x 4 FF Combine Mode 8x 4 FF Optical/Digital Zoom Combined Separate Mode 8x 4 FF Optical/Digital Zoom Separate Stop 8x 4 FF Tele(Variable) 8x 4 6 p FF p= (Low) to 7 (High) Wide(Variable) 8x 4 6 p FF x/max 8x 4 6 FF x/max Magnification Switchover Direct 8x 4 4 p q FF pq: D-Zoom Position CAM_Focus Stop 8x 4 8 FF Far(Standard) 8x 4 8 FF Near(Standard) 8x 4 8 FF Far(Variable) 8x 4 8 p FF p= (Low) to 7 (High) Near(Variable) 8x 4 8 p FF Direct 8x 4 48 p q r s FF pqrs: Focus Position Auto Focus 8x 4 8 FF AF ON/OFF Manual Focus 8x 4 8 FF Auto/Manual 8x 4 8 FF One Push Trigger 8x 4 8 FF One Push AF Trigger Infinity 8x 4 8 FF Forced infinity Near Limit 8x 4 8 p q r s FF pqrs: Focus Near Limit Position 8

39 Command List EVI-D7/P Command List (/4) Command Set Command Command Packet Comments AF Sensitivity Normal 8x 4 58 FF AF Sensitivity High/Low Low 8x 4 58 FF CAM_AFMode Normal AF 8x 4 5 FF AF Movement Mode Interval AF 8x 4 5 FF Zoom Trigger AF 8x 4 5 FF Active/Interval Time 8x 4 p q r s FF pq: Movement Time, rs: Interval CAM_ZoomFocus Direct 8x 4 4p q r s pqrs: Zoom Position t u v w FF tuvw: Focus Position CAM_Initialize Lens 8x 4 9 FF Lens Initialization Start Comp Scan 8x 4 9 FF Correction of CCD pixel blemishes CAM_WB Auto 8x 4 FF Normal Auto Indoor 8x 4 FF Indoor mode Outdoor 8x 4 FF Outdoor mode One Push WB 8x 4 FF One Push WB mode ATW 8x 4 4 FF Auto Tracing White Balance Manual 8x 4 5 FF Manual Control mode One Push Trigger 8x 4 5 FF One Push WB Trigger CAM_RGain Reset 8x 4 FF Manual Control of R Gain Up 8x 4 FF Down 8x 4 FF Direct 8x 4 4 p q FF pq: R Gain CAM_BGain Reset 8x 4 4 FF Manual Control of B Gain Up 8x 4 4 FF Down 8x 4 4 FF Direct 8x 4 44 p q FF pq: B Gain CAM_AE Full Auto 8x 4 9 FF Automatic Exposure mode Manual 8x 4 9 FF Manual Control mode Shutter Priority 8x 4 9 A FF Shutter Priority Automatic Exposure mode Iris Priority 8x 4 9 B FF Iris Priority Automatic Exposure mode Bright 8x 4 9 D FF Bright Mode (Manual control) CAM_SlowShutter Auto 8x 4 5A FF Auto Slow Shutter ON/OFF Manual 8x 4 5A FF CAM_Shutter Reset 8x 4 A FF Shutter Setting Up 8x 4 A FF Down 8x 4 A FF Direct 8x 4 4A p q FF pq: Shutter Position CAM_Iris Reset 8x 4 B FF Iris Setting Up 8x 4 B FF Down 8x 4 B FF Direct 8x 4 4B p q FF pq: Iris Position CAM_Gain Reset 8x 4 C FF Gain Setting Up 8x 4 C FF Down 8x 4 C FF Direct 8x 4 4C p q FF pq: Gain Position CAM_Bright Reset 8x 4 D FF Bright Setting Up 8x 4 D FF Down 8x 4 D FF Direct 8x 4 4D p q FF pq: Bright Position 9

40 Command List EVI-D7/P Command List (/4) Command Set Command Command Packet Comments CAM_ExpComp On 8x 4 E FF Exposure Compensation ON/OFF Off 8x 4 E FF Reset 8x 4 E FF Exposure Compensation Amount Setting Up 8x 4 E FF Down 8x 4 E FF Direct 8x 4 4E p q FF pq: ExpComp Position CAM_Backlight On 8x 4 FF Back Light Compensation ON/OFF Off 8x 4 FF CAM_SpotAE On 8x 4 59 FF Spot Automatic Exposure Setting Off 8x 4 59 FF Position 8x 4 9 p q r s FF pq: X ( to F), rs: Y ( to F) CAM_Aperture Reset 8x 4 FF Aperture Control Up 8x 4 FF Down 8x 4 FF Direct 8x 4 4 p q FF pq: Aperture Gain CAM_LR_Reverse On 8x 4 6 FF Mirror Image ON/OFF Off 8x 4 6 FF CAM_Freeze On 8x 4 6 FF Still Image ON/OFF Off 8x 4 6 FF CAM_PictureEffect Off 8x 4 6 FF Picture Effect Setting Neg.Art 8x 4 6 FF B&W 8x FF CAM_ICR On 8x 4 FF Infrared Mode ON/OFF a) Off 8x 4 FF CAM_AutoICR On 8x 4 5 FF Auto Infrared Mode ON/OFF a) Off 8x 4 5 FF CAM_Memory Reset 8x 4 F p FF p: Memory Number (= to 5) Set 8x 4 F p FF Recall 8x 4 F p FF CAM_Display On 8x 4 FF Display ON/OFF (8x FF) Off 8x 4 FF (8x FF) On/Off 8x 4 5 FF (8x 6 FF) CAM_Title Title Set 8x 4 7 mm nn pp mm: Vposition, nn: Hposition qq FF pp: Color, qq: Blink Title Set 8x 4 7 mm nn pp mnpqrstuvw: Setting of Display Characters qq rr ss tt uu vv ww FF (st to st Character) Title Set 8x 4 7 mm nn pp mnpqrstuvw: Setting of Display Characters qq rr ss tt uu vv ww FF (th to th Character) Title Clear 8x 4 74 FF Title Setting Clear On 8x 4 74 FF Title Display ON/OFF Off 8x 4 74 FF CAM_Mute On 8x 4 7 FF Mute ON/OFF Off 8x 4 7 FF On/Off 8x 4 75 FF a) Some models do not support Infrared Mode. 4

41 Command List EVI-D7/P Command List (4/4) Command Set Command Command Packet Comments CAM_KeyLock Off 8x 4 FF Camera Control Enable/Disable On 8x 4 FF CAM_IDWrite 8x 4 p q r s FF pqrs: Camera ID (= to FFFF) CAM_Alarm On 8x 4 6B FF Alarm ON/OFF Off 8x 4 6B FF SetMode 8x 4 6C pp FF PP: Mode Settings Focus Move Detection (The rest position is fixed.) Focus Move Detection (The rest position is reset.) AE Move Detection (The rest value is fixed.) AE Move Detection (The rest value is reset.) SetTime 8x 4 6D p p FF pp: Reset Time Setting Alarm (Reply) y 4 6B FF Detect Level Low t High y 4 6B FF Detect Level High t Low IR_Receive On 8x 8 FF IR(remote controller) receive ON/OFF Off 8x 8 FF On/Off 8x 8 FF IR_ReceiveReturn On 8x 7D FF IR(remote controller) receive message ON/OFF Off 8x 7D FF Pan-tiltDrive Up 8x VV WW FF VV: Pan speed to 8 Down 8x VV WW FF WW: Tilt Speed to 7 Left 8x VV WW FF YYYY: Pan Position F75 to 8B (center ) Right 8x VV WW FF Pan Position FE7 to 4B (Image Flip: OFF) (center ) UpLeft 8x VV WW FF ZZZZ: Tilt Position FB5 to 9 (Image Flip: ON) UpRight 8x VV WW FF (center ) DownLeft 8x VV WW FF DownRight 8x VV WW FF Stop 8x VV WW FF AbsolutePosition 8x VV WW Y Y Y Y Z Z Z Z FF RelativePosition 8x VV WW Y Y Y Y Z Z Z Z FF Home 8x 4 FF Reset 8x 5 FF Pan-tiltLimitSet LimitSet 8x W W: UpRight, DownLeft Y Y Y Y Z Z Z Z FF YYYY: Pan Limit Position F75 to 8B (center ) LimitClear 8x W ZZZZ: Tilt Limit Position FE7 to 4B (Image Flip: OFF) F F F F F F FF (center ) Tilt Limit Position FB5 to 9 (Image Flip: ON) (center ) 4

42 Command List EVI-D7/P Inquiry Command List (/) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 9 4 FF y 5 FF On y 5 FF Off CAM_AutoPowerOffInq 8x FF y 5 p q r s FF pqrs: PowerOff Timer CAM_NightPowerOff Inq 8x FF y 5 p q r s FF pqrs: NightPowerOff Timer CAM_ZoomPosInq 8x FF y 5 p q r s FF pqrs: Zoom Position CAM_DZoomModeInq 8x FF y 5 FF D-Zoom On y 5 FF D-Zoom Off CAM_DZoomC/SModeInq 8x FF y 5 FF Combine Mode y 5 FF Separate Mode CAM_DZoomPosInq 8x FF y 5 p q FF pq: D-Zoom Position CAM_FocusModeInq 8x FF y 5 FF Auto Focus y 5 FF Manual Focus CAM_FocusPosInq 8x FF y 5 p q r s FF pqrs: Focus Position CAM_FocusNearLimitInq 8x FF y 5 p q r s FF pqrs: Focus Near Limit Position CAM_AFSensitivityInq 8x FF y 5 FF AF Sensitivity Normal y 5 FF AF Sensitivity Low CAM_AFModeInq 8x FF y 5 FF Normal AF y 5 FF Interval AF y 5 FF Zoom Trigger AF CAM_AFTimeSettingInq 8x FF y 5 p q r s FF pq: Movement Time, rs: Interval CAM_WBModeInq 8x FF y 5 FF Auto y 5 FF In Door y 5 FF Out Door y 5 FF One Push WB y 5 4 FF ATW y 5 5 FF Manual CAM_RGainInq 8x FF y 5 p q FF pq: R Gain CAM_BGainInq 8x FF y 5 p q FF pq: B Gain CAM_AEModeInq 8x FF y 5 FF Full Auto y 5 FF Manual y 5 A FF Shutter Priority y 5 B FF Iris Priority y 5 D FF Bright CAM_SlowShutterModeInq 8x 9 4 5A FF y 5 FF Auto y 5 FF Manual CAM_ShutterPosInq 8x 9 4 4A FF y 5 p q FF pq: Shutter Position CAM_IrisPosInq 8x 9 4 4B FF y 5 p q FF pq: Iris Position CAM_GainPosInq 8x 9 4 4C FF y 5 p q FF pq: Gain Position CAM_BrightPosInq 8x 9 4 4D FF y 5 p q FF pq: Bright Position CAM_ExpCompModeInq 8x 9 4 E FF y 5 FF On y 5 FF Off CAM_ExpCompPosInq 8x 9 4 4E FF y 5 p q FF pq: ExpComp Position CAM_BacklightModeInq 8x 9 4 FF y 5 FF On y 5 FF Off CAM_SpotAEModeInq 8x FF y 5 FF On y 5 FF Off CAM_SpotAEPosInq 8x FF y 5 p q r s FF pq: X position, rs: Y position CAM_ApertureInq 8x FF y 5 p q FF pq: Aperture Gain 4

PTZ and Block Camera Control Protocol. JAN 15 th, 2019

PTZ and Block Camera Control Protocol. JAN 15 th, 2019 Rev 1.8 PTZ and Block Camera Control Protocol JAN 15 th, 2019 Model: BC-80, BC-80T, BC-200, BC-200T, PTC-150, PTC-150T, PTC-200, PTC-200T Datavideo Technologies Datavideo PTZ/Block Camera VISCA Commands

More information

Camera Module Technical Manual FCB-EX480A/EX480AP (Color models) FCB-EX48A/EX48AP (Color models) FCB-EX45M/EX45MCE (Black-and-white models)

Camera Module Technical Manual FCB-EX480A/EX480AP (Color models) FCB-EX48A/EX48AP (Color models) FCB-EX45M/EX45MCE (Black-and-white models) A-B8-- () Camera Module Technical Manual FCB-EX48A/EX48AP (Color models) FCB-EX48A/EX48AP (Color models) FCB-EX45M/EX45MCE (Black-and-white models) Sony Corporation Table of Contents Features... Locations

More information

A-B (1) Color Camera Module. Technical Manual FCB-EX780S/EX780SP Sony Corporation

A-B (1) Color Camera Module. Technical Manual FCB-EX780S/EX780SP Sony Corporation A-B6-- () Color Camera Module Technical Manual FCB-EX78S/EX78SP Sony Corporation Table of Contents Features... Locations of Controls... 4 Basic Functions... 5 Overview of Functions... 5 ECLIPSE... Initial

More information

A-B (1) Color Camera Module. Technical Manual FCB-EX780S/EX780SP Sony Corporation

A-B (1) Color Camera Module. Technical Manual FCB-EX780S/EX780SP Sony Corporation A-B6-- () Color Camera Module Technical Manual FCB-EX78S/EX78SP Sony Corporation Table of Contents Features... Locations of Controls... 4 Basic Functions... 5 Overview of Functions... 5 Eclipse... Spectral

More information

PTZ Camera. for HDVS-300 Soft Codec Conferencing System. Application Programming Interface. Atlona Manuals Accessories AT-HDVS-CAM

PTZ Camera. for HDVS-300 Soft Codec Conferencing System. Application Programming Interface. Atlona Manuals Accessories AT-HDVS-CAM PTZ Camera for HDVS-300 Soft Codec Conferencing System Application Programming Interface AT-HDVS-CAM Atlona Manuals Accessories Version Information Version Release Date Notes 1 4/18 Initial release AT-HDVS-CAM

More information

HuddleCamHD SimplTrack2

HuddleCamHD SimplTrack2 Page1 HuddleCamHD SimplTrack2 Auto Tracking Camera Installation & Operation Manual Page2 Table of Contents. Precautions Safety Tips............... Page 3 What s in the Box.............. Page 3 Physical

More information

HuddleCamHD SimplTrack

HuddleCamHD SimplTrack Page1 HuddleCamHD SimplTrack Auto Tracking Camera Installation & Operation Manual Page2 Table of Contents. Precautions Safety Tips............... Page 3 What s in the Box.............. Page 3 Physical

More information

HuddleCamHD 10x (Gen 3)

HuddleCamHD 10x (Gen 3) HuddleCamHD 10x (Gen 3) USB 3.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL Precautions. Safety Tips. Please read this manual carefully before using the camera. Avoid damage from stress, violent vibration

More information

COLOR CAMERA MODULE FCB-IX47/IX47P FCB-IX470/IX470P

COLOR CAMERA MODULE FCB-IX47/IX47P FCB-IX470/IX470P COLOR CAMERA MODULE FCB-IX47/IX47P Instruction Manual (Ver..) English Table of Contents OUTLINE... SPECIFICATIONS... DIMENSIONS... PIN ASSIGNMENT... 3 FUNCTIONS... 4 CONTROL METHODS... 3 INSTALLATION...

More information

CeilingVIEW 70 PTZ Integrated, Recessed Installation Pan/Tilt/Zoom Ceiling Camera System

CeilingVIEW 70 PTZ Integrated, Recessed Installation Pan/Tilt/Zoom Ceiling Camera System Camera and Electronic Products for Integrators Installation and User Guide CeilingVIEW 70 PTZ Integrated, Recessed Installation Pan/Tilt/Zoom Ceiling Camera System Figure 1: Vaddio CeilingVIEW 70 PTZ Camera

More information

C (1) Color Video Camera. Command List BRC-X1000/H800/H Sony Corporation

C (1) Color Video Camera. Command List BRC-X1000/H800/H Sony Corporation C--- () Color Video Camera Command List BRC-X/H8/H78 Sony Corporation Table of Contents VISCA Commands... Overview of VISCA... VISCA Communication Specifications... VISCA Device Setting Command... VISCA

More information

A-CHH (1) Color Camera Module. Technical Manual FCB-EX1000/EX1000P Sony Corporation

A-CHH (1) Color Camera Module. Technical Manual FCB-EX1000/EX1000P Sony Corporation A-CHH--() Color Camera Module Technical Manual FCB-EX/EXP 6 Sony Corporation Table of Contents Features... Precautions... 4 Locations of Controls... 5 Basic Functions... 6 Overview of Functions... 6 Eclipse...

More information

z0 4y FF (y: Socket No.) z0 5y FF (y: Socket No.) z FF Command Canceled (y: Socket No.) z0 6y 05 FF (y: Socket No.)

z0 4y FF (y: Socket No.) z0 5y FF (y: Socket No.) z FF Command Canceled (y: Socket No.) z0 6y 05 FF (y: Socket No.) VISCA Command List Part 1 Camera-Issued Messages Ack/Completion Message Command Function Command Packet Comments ACK ACK/Comletion Messages Completion z = Camera Address + 8 z0 4y FF (y: Socket No.) z0

More information

USB2.0 HD Video Camera

USB2.0 HD Video Camera USB2.0 HD Video Camera User Manual Version V1.0 (English) CONTENTS SAFE GUIDES............ 4 ACCESSORIES.........4 QUICK START...5 PRODUCT HIGHLIGHTS...6 PRODUCT SPEC...7 CAMERA INTERFACE...8 CAMERA DIMENSION...8

More information

USB3.0 HD Video Camera

USB3.0 HD Video Camera USB3.0 HD Video Camera User Manual Version V1.0 (English) 1 CONTENTS SAFE GUIDES............. 3 ACCESSORIES......3 QUICK START...4 PRODUCT HIGHLIGHTS...5 PRODUCT SPEC...5 CAMERA INTERFACE...6 CAMERA DIMENSION...6

More information

TEK 380-HD HDMI/SDI Conference Camera User s Guide

TEK 380-HD HDMI/SDI Conference Camera User s Guide TEK 380-HD HDMI/SDI Conference Camera User s Guide TEK 380-HD Conference Camera V031015 Table of Contents Overview... 4 Main Features... 4 Camera and Lens... 5 Pan/Tilt Movement... 5 Rear Connectors...

More information

FCB-EX Series. Color Block Cameras.

FCB-EX Series. Color Block Cameras. FCB-EX Series Color Block Cameras www.sony.com/videocameras INTRODUCTION MAIN FEATURES FCB-EX Series Sony continues to be on the cutting edge of the imaging industry with the latest additions to the FCB

More information

TLC-700-S. HD PTZ Video Camera User Manual. Version V1.0 (English)

TLC-700-S. HD PTZ Video Camera User Manual. Version V1.0 (English) TLC-700-S HD PTZ Video Camera User Manual Version V1.0 (English) CONTENTS SAFETY GUIDES...1 ACCESSORIES...2 QUICK START...2 PRODUCT HIGHLIGHTS...3 CAMERA SPEC...3 CAMERA INTERFACE...4 CAMERA DIMENSION...4

More information

FCB-EX Series Color Block Cameras. FCB-EX1010/FCB-EX1010P FCB-EX1000/FCB-EX1000P FCB-EX990D/FCB-EX990DP

FCB-EX Series Color Block Cameras.   FCB-EX1010/FCB-EX1010P FCB-EX1000/FCB-EX1000P FCB-EX990D/FCB-EX990DP FCB-EX Series Color Block Cameras www.sony.com/videocameras INTRODUCTION Sony s FCB Series of color block cameras offers excellent picture quality, superb flexibility, and easy operation in a variety of

More information

FCB-EV Series Color Block Camera

FCB-EV Series Color Block Camera FCB-EV Series Color Block Camera FCB-EV7100 FCB-EV5500 FCB-EV5300 FCB-EV7500 FCB-EV7300 FCB-EV7310 * This brochure is published based on the features and specifications for firmware Version 0310. Introduction

More information

VC-A20P_VC-A202P RS-232 command set

VC-A20P_VC-A202P RS-232 command set VC-AP_VC-AP RS- command set No Issue Date Description Apply Firmware /9/ First version. VCT // Add VC-AP which has same command set with VC-AP NA 5//7 Add 7. RS over IP VCT7. Delete command: Power_LoadState/Power_LoadStateInq

More information

FCB-EV Series. Colour Block Cameras FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV7100 FCB-EV5500 FCB-EV

FCB-EV Series. Colour Block Cameras FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV7100 FCB-EV5500 FCB-EV FCB-EV7500 FCB-EV7300 FCB-EV5500 FCB-EV7310 FCB-EV5300 FCB-EV Series Colour Block Cameras FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV5500 FCB-EV5300 IMAGE IMAGE SENSING SOLUTIONS Colour Block XCD Camera MV6

More information

PTC-150 DVIP Protocol

PTC-150 DVIP Protocol PTC-150 DVIP Protocol July 21, 2015 1 1. Command Driving Protocol 1.1 Command Head: Command Start: 0x00 Command Length: 0x0n (n = total length from 0x00 to 0xFF) Start Byte 0x00 Command Length Byte Command

More information

Aegis Electronic Group FCB-EV7520 FCB-EV7320

Aegis Electronic Group   FCB-EV7520 FCB-EV7320 FCB-EV7520 FCB-EV7320 FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV5500 FCB-EV5300 FCB-EV Series Colour Block Cameras FCB-EV7520 FCB-EV7320 FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV5500 FCB-EV5300 IMAGE IMAGE

More information

FCB-EV Series. Colour Block Cameras FCB-EV7500 FCB-EV7300 FCB-EV7520 FCB-EV7320 FCB-EV7310 FCB-EV7100 FCB-EV5500 FCB-EV5300

FCB-EV Series. Colour Block Cameras FCB-EV7500 FCB-EV7300 FCB-EV7520 FCB-EV7320 FCB-EV7310 FCB-EV7100 FCB-EV5500 FCB-EV5300 FCB-EV7520 FCB-EV7320 FCB-EV7500 FCB-EV7300 FCB-EV5500 FCB-EV7310 FCB-EV5300 FCB-EV Series Colour Block Cameras FCB-EV7520 FCB-EV7320 FCB-EV7500 FCB-EV7300 FCB-EV7310 FCB-EV5500 FCB-EV5300 IMAGE IMAGE

More information

GOHD400. High Definition PTZ Camera. User Manual

GOHD400. High Definition PTZ Camera. User Manual High Definition PTZ Camera User Manual Precautions Do not subject the camera to moisture or extreme humidity. Do not attempt to disassemble the unit. Electric shock may occur. Do not operate with a third

More information

TLC-700-U3 USB3.0 HD Video Camera. User Manual. Version V1.0(English) Telecam Technology Co.,Ltd. All Rights Reserved

TLC-700-U3 USB3.0 HD Video Camera. User Manual. Version V1.0(English) Telecam Technology Co.,Ltd. All Rights Reserved TLC-700-U3 USB3.0 HD Video Camera User Manual Version V1.0(English) Copyright @ Telecam Technology Co.,Ltd. All Rights Reserved USB3.0 HD Video Camera User Manual Version V1.0 (English) Contents SAFETY

More information

Operating Instructions

Operating Instructions CV610-U2 Full HD USB 2.0 PTZ Camera Operating Instructions Version V3.6 Accessories IMPORTANT SAFETY INSTRUCTIONS: Table of Contents SAFETY GUIDELINES... 3 ACCESSORIES... 3 QUICK START... 4 PRODUCT HIGHLIGHTS...

More information

Aegis Electronic Group FCB-PV Series Color Block Cameras

Aegis Electronic Group FCB-PV Series Color Block Cameras FCB-PV Series Color Block Cameras FCB-EX980S/FCB-EX980SP FCB-EX980/FCB-EX980P FCB-EX480C/FCB-EX480CP FCB-EX48C/FCB-EX48CP MAIN FEATURES Sony s New High Quality FCB-PV Progressive Scan Color Block Cameras

More information

Aegis Electronic Group

Aegis Electronic Group FCB-EX1020/FCB-EX1020P FCB-EX Series Color Block Cameras www.sony.com/videocameras For More Information Please Call, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com INTRODUCTION

More information

FCB-PV Series. Colour Camera Block

FCB-PV Series. Colour Camera Block FCB-PV Series Colour Camera Block Image Sensing Solutions New High Quality Sony FCB-PV Progressive Scan Colour Block Cameras Expand Application Solutions by Combining Renowned Sony FCB Picture Quality

More information

VC-C50i COMMUNICATION CAMERA PROGRAMMER'S MANUAL

VC-C50i COMMUNICATION CAMERA PROGRAMMER'S MANUAL VC-C50i COMMUNICATION CAMERA PROGRAMMER'S MANUAL Contents 1. Getting Started... 6 2. Connection with your Computer... 6 2.1 Connection... 6 2.2 Connector & Pin Assignment... 7 3. Communication Format...

More information

UNITE 150 CAMERA USER GUIDE

UNITE 150 CAMERA USER GUIDE UNITE 150 CAMERA USER GUIDE 2 UNITE 150: User Guide COPYRIGHT NOTICE ClearOne 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Telephone 1.801.975.7200 Tech Sales 1.801.974.3760 Fax 1.801.303.5711

More information

Camera Installation Manual Ver 1.0. Pan, Tilt and Zoom Dome Camera / PTZ

Camera Installation Manual Ver 1.0. Pan, Tilt and Zoom Dome Camera / PTZ Camera Installation Manual Ver 1.0 1 Introduction Features 3 Components 4 System Configuration 5 2 Installation Wall Mount 6 Ceiling Mount 7 Final Assembly 8 3 Camera Addressing Camera Address Setting

More information

FCB-EX E Series Colour Block Cameras

FCB-EX E Series Colour Block Cameras FCB-EX E Series Colour Block Cameras IMAGE SENSING SOLUTIONS Sony s FCB Series of colour block cameras offers excellent picture quality, superb flexibility, and easy operation in a variety of applications

More information

FCB-EX Series Color Block Cameras. FCB-EX1020/FCB-EX1020P FCB-EX995E/FCB-EX995EP FCB-EX985E/FCB-EX985EP FCB-EX48E/FCB-EX48EP

FCB-EX Series Color Block Cameras.   FCB-EX1020/FCB-EX1020P FCB-EX995E/FCB-EX995EP FCB-EX985E/FCB-EX985EP FCB-EX48E/FCB-EX48EP FCB-EX1020/FCB-EX1020P FCB-EX Series Color Block Cameras www.sony.com/videocameras INTRODUCTION Sony s FCB E Series of color block cameras offer excellent picture quality with a choice of lenses and easy

More information

SDI Speed Dome Camera OSD Menu

SDI Speed Dome Camera OSD Menu SDI Speed Dome Camera OSD Menu Indoor/ Outdoor Ver 1.2 00P9SH720ZXSEA2 Table of Contents 1. OSD Menu Tree...4 2. Configuration Menu...7 2.1 VIDEO TYPE...8 2.2 DEFAULT CAMERA...8 2.3 BACKLIGHT...8 2.4 FOCUS...8

More information

Table of Contents. Standard Warranty Two Year Warranty... 6

Table of Contents. Standard Warranty Two Year Warranty... 6 1 2 Table of Contents Warnings and Precautions... 5 Warranty... 6 Standard Warranty... 6 Two Year Warranty... 6 Disposal... 7 Packing List... 7 1. Product Overview... 8 2. Features... 8 3. System Configuration...

More information

HuddleCamHD 10X-USB2

HuddleCamHD 10X-USB2 HuddleCamHD 10X-USB2 USB 2.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL Please check HUDDLECAMHD.com for the most up to date version of this document Precautions. Safety Tips. Please read this manual carefully

More information

DANNOVO HD USB 3.0 PTZ Video Conference Camera User Manual

DANNOVO HD USB 3.0 PTZ Video Conference Camera User Manual DANNOVO HD USB 3.0 PTZ Video Conference Camera User Manual V 2.3(ENGLISH VERSION) Please read this Manual before set up Camera, and stick to its requirements strictly for Safety reason. Suggest you save

More information

CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS...

CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS... Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe

More information

SPD hour All-Round Surveillance PTZ (25X) High Speed Color Dome Camera

SPD hour All-Round Surveillance PTZ (25X) High Speed Color Dome Camera SPD-2500 24-hour All-Round Surveillance PTZ (25X) High Speed Color Dome Camera www.samsungcctv.com www.webthru.net Broaden your surveillance with the Samsung SPD-2500. See how one speed dome camera can

More information

VC-C4 COMMUNICATION CAMERA PROGRAMMER'S MANUAL

VC-C4 COMMUNICATION CAMERA PROGRAMMER'S MANUAL VC-C4 COMMUNICATION CAMERA PROGRAMMER'S MANUAL Contents 1. Getting Started... 5 2. Connection with your Computer... 5 2.1 Connection... 5 2.2 Connector & Pin Assignment... 5 3. Communication Format...

More information

CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS...

CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS... Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe

More information

INSTRUCTION MANUAL Ver 3.0. Indoor Pan, Tilt and Zoom Dome Camera / ACD-1000-LG27

INSTRUCTION MANUAL Ver 3.0. Indoor Pan, Tilt and Zoom Dome Camera / ACD-1000-LG27 INSTRUCTION MANUAL Ver 3.0 Indoor 1 Introduction Features 3 Components 4 System Configuration 5 2 RS485 and PTZ Basics Physical Connection 6 Multiple PTZ Setup 7 ID, Protocol, Baud Rate 9 3 Installation

More information

FCB-EX Series. Component/OEM FCB-EX780B/EX780BP FCB-EX78B/EX78BP FCB-EX480B/EX480BP FCB-EX48B/EX48BP OUTLINE FEATURES COLOR BLOCK CAMERAS

FCB-EX Series. Component/OEM FCB-EX780B/EX780BP FCB-EX78B/EX78BP FCB-EX480B/EX480BP FCB-EX48B/EX48BP OUTLINE FEATURES COLOR BLOCK CAMERAS Component/OEM FCB-EX Series COLOR BLOCK CAMERAS FCB-EX780B/EX780BP FCB-EX78B/EX78BP FCB-EX480B/EX480BP FCB-EX48B/EX48BP FCB-EX780B/EX780BP FCB-EX78B/EX78BP FCB-EX480B/EX480BP FCB-EX48B/EX48BP OUTLINE Sony

More information

Supplied Accessories.

Supplied Accessories. Precautions. Safety Tips. Please read this manual carefully before using the camera. Avoid damage from stress, violent vibration or liquid intrusion during transportation, storage or installation. Take

More information

Table of Contents. Standard Warranty 5. Two Year Warranty Remote Control Functions On-Screen Menu Step 1 DIP Switch Setting 21

Table of Contents. Standard Warranty 5. Two Year Warranty Remote Control Functions On-Screen Menu Step 1 DIP Switch Setting 21 1 Table of Contents Warnings and Precautions 4 Warranty 5 Standard Warranty 5 Two Year Warranty 5 Disposal 5 1. Product Overview 6 2. Features 6 3. Location and Function of Parts 7 4. System Diagram 8

More information

NTSC/PAL. 3CCD Color Video Camera BRC-300 BRC-300P

NTSC/PAL. 3CCD Color Video Camera BRC-300 BRC-300P NTSC/PAL 3CCD Color Video Camera BRC-300 BRC-300P MAIN FEATURES Superb Picture Quality with a Mega Pixels 3-CCD Sony s new BRC-300 is a revolutionary all-in-one compact robotic color video camera system,

More information

Nearus USB2.0 Camera Manual NU-350-USB2PTZ-B

Nearus USB2.0 Camera Manual NU-350-USB2PTZ-B Nearus USB2.0 Camera Manual NU-350-USB2PTZ-B Safety Tips Please read this manual carefully before installing the camera. Keep the camera away from violent vibration, physical stress, moisture, extreme

More information

NTSC/PAL. 3CCD Color Video Camera BRC-300 BRC-300P

NTSC/PAL. 3CCD Color Video Camera BRC-300 BRC-300P NTSC/PAL 3CCD Color Video Camera P MAIN FEATURES Superb Picture Quality with a Mega Pixels 3-CCD Sony s new is a revolutionary all-in-one compact robotic color video camera system, specially designed for

More information

Supplied Accessories.

Supplied Accessories. Precautions. Safety Tips. Please read this manual carefully before using the camera. Avoid damage from stress, violent vibration or liquid intrusion during transportation, storage or installation. Take

More information

FCB-EX Series Color Block Cameras. Compliments of Phase1tech.com. FCB-EX12E/FCB-EX12EP FCB-EX48E/FCB-EX48EP

FCB-EX Series Color Block Cameras. Compliments of Phase1tech.com.   FCB-EX12E/FCB-EX12EP FCB-EX48E/FCB-EX48EP FCB-EX1020/FCB-EX1020P FCB-EX12E/FCB-EX12EP FCB-EX11D/FCB-EX11DP FCB-EX20D/FCB-EX20DP FCB-EX Series Color Block Cameras www.sony.com/videocameras INTRODUCTION Sony s FCB Series of color block cameras offers

More information

HuddleCamHD 3XA with Audio USB 2.0 PTZ Camera w/ built-in Mic Array Installation and Operation Manual

HuddleCamHD 3XA with Audio USB 2.0 PTZ Camera w/ built-in Mic Array Installation and Operation Manual HuddleCamHD 3XA with Audio USB 2.0 PTZ Camera w/ built-in Mic Array Installation and Operation Manual Precautions Safety Tips Please be aware any deviation from these tips may void your warranty Please

More information

AZM-FS30L. Full-HD 30x Optical Zoom Module. Technical Manual DATE : VERSION : Conact: ---

AZM-FS30L. Full-HD 30x Optical Zoom Module. Technical Manual DATE : VERSION : Conact: --- Full-HD 30x Optical Zoom Module Technical Manual DATE : 2018-02-28 VERSION : 1.03 20Z30L Contents 1. Feature 2. Cautions 3. Specification 4. Connector 5. Interface 6. LVDS receive e circuit it / Cable

More information

35x 4K UHD PTZ Video Camera User Manual. Version V1.0 (English)

35x 4K UHD PTZ Video Camera User Manual. Version V1.0 (English) 35x 4K UHD PTZ Video Camera User Manual Version V1.0 (English) CONTENT CONTENT... 1 SAFETY GUIDES... 2 PACKING LIST... 3 QUICK START... 3 PRODUCT HIGHLIGHTS.... 4 CAMERA SPEC.... 4 CAMERA INTERFACE....

More information

HuddleCamHD 3x USB 2.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL

HuddleCamHD 3x USB 2.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL HuddleCamHD 3x USB 2.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL Precautions. Safety Tips. Please read this manual carefully before using the camera. Avoid damage from stress, violent vibration or liquid

More information

FastCam Outdoor Speed Dome Camera

FastCam Outdoor Speed Dome Camera FastCam Outdoor Speed Dome Camera CC-9760 & CC-9760-I USER INSTRUCTION MANUAL Version: V1.2 Doc No.: 20051114001 1 A BOUT THIS GUIDE Conventions used in this guide To make sure that you perform certain

More information

User Manual V Model: AV-1080 HD Video Conferencing Camera (SDI) Model: AV-1081 HD Video Conferencing Camera (HDMI)

User Manual V Model: AV-1080 HD Video Conferencing Camera (SDI) Model: AV-1081 HD Video Conferencing Camera (HDMI) Model: AV-1080 HD Video Conferencing Camera (SDI) Model: AV-1081 HD Video Conferencing Camera (HDMI) User Manual V1.0 Please Read this User Manual throughout before using www.avipas.com 1 Preface Thanks

More information

BRC-300/BRC-300P. 3CCD Color Video Camera. 3CCD Color Video Camera

BRC-300/BRC-300P. 3CCD Color Video Camera. 3CCD Color Video Camera BRC-300/BRC-300P 3CCD Color Video Camera 3CCD Color Video Camera MAIN FEATURES Superb Picture Quality The BRC-300 incorporates three 1/4.7-type Advanced HAD CCD sensors with a total of 1,070,000 pixels.

More information

ST-PTZ High-Speed Intelligent Dome PTZ Color Camera

ST-PTZ High-Speed Intelligent Dome PTZ Color Camera INSTALLATION MANUAL ST-PTZ550-27 High-Speed Intelligent Dome PTZ Color Camera Copyright North American Cable Equipment, Inc. 1 PACKAGE CONTENTS This package contains: One ST-PTZ550-27 high-speed intelligent

More information

PTZ Camera. for HDVS-300 Soft Codec Conferencing System. Atlona Manuals AT-HDVS-CAM. PTZ Camera

PTZ Camera. for HDVS-300 Soft Codec Conferencing System. Atlona Manuals AT-HDVS-CAM. PTZ Camera PTZ Camera for HDVS-300 Soft Codec Conferencing System AT-HDVS-CAM Atlona Manuals PTZ Camera Version Information Version Release Date Notes 1 10/17 Initial release AT-OMNI-232 2 Welcome to Atlona! Thank

More information

HD Color Video Camera

HD Color Video Camera C-289-100-12 (1) HD Color Video Camera Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. SRG-360SHE 2016 Sony Corporation Table of

More information

Marshall Electronics. User Manual CV610-U3. Full HD Teleconference PTZ USB3.0 Camera. Ver. 2.0

Marshall Electronics. User Manual CV610-U3. Full HD Teleconference PTZ USB3.0 Camera. Ver. 2.0 Marshall Electronics CV610-U3 Full HD Teleconference PTZ USB3.0 Camera User Manual Ver. 2.0 1 Operating Instructions OPERATING INSTRUCTIONS... 3 WHAT S IN THE BOX... 5 FEATURES... 6 CAMERA DIAGRAMS...

More information

MG20S (AF 20 times) Specification

MG20S (AF 20 times) Specification MG20S (AF 20 times) Specification SERIES NO. MG20S MAIN FUNCTION Auto Focus CCD Megapixel Zoom module with Electronic PTZ HDTV mode. :20 times Zoom / SDTV(D1) App. :80 times Zoom IMAGE SENSOR 1/3-inch

More information

4K PTZ Camera USER MANUAL VERSION: VCC-4K12S-M VCC-8-4K12S-SM Bolin Technology

4K PTZ Camera USER MANUAL VERSION: VCC-4K12S-M VCC-8-4K12S-SM Bolin Technology 4K PTZ Camera USER MANUAL VERSION: VCC-4K12S-M-11142018 VCC-8-4K12S-SM 2018 Bolin Technology 1 Contents IMPORTANT INFORMATION... 3 WHAT S IN THE BOX... 5 OVERVIEW... 6 CAMERA VERSION... 6 MODEL NUMBERS...

More information

SSC-CD SERIES Fixed Mini-dome Cameras SSC-CD45P SSC-CD49P SSC-CD75P SSC-CD77P.

SSC-CD SERIES Fixed Mini-dome Cameras SSC-CD45P SSC-CD49P SSC-CD75P SSC-CD77P. SSC-CD SERIES Fixed Mini-dome Cameras SSC-CD45P SSC-CD49P SSC-CD75P SSC-CD77P www.sonybiz.net/nvm SSC-CD Series Fixed Mini-dome Cameras Reproducing extremely clear and detailed images Sony Analogue Mini-dome

More information

OPERATING MANUAL. Hyper Dynamic Range

OPERATING MANUAL. Hyper Dynamic Range OPERATING MANUAL Before attempting to connect or operate this product, please read these instructions completely Hyper Dynamic Range WDS-HDR1527DN Day & Night OLPF Removable WDS-HDR1520 DIGITAL COLOR VIDEO

More information

EVI-D100(NTSC)/D100P(PAL)

EVI-D100(NTSC)/D100P(PAL) EVI-D100(NTSC)/D100P(PAL) Intelligent communication camera perfectly suited for applications that requires a highquality color video camera with the flexibility of remote pan/tilt/zoom operations. EVI-D100

More information

Fixed Mini-dome Cameras. SSC-CD Series SSC-CD79/CD79P SSC-CD77/CD77P SSC-CD75/CD75P SSC-CD49/CD49P SSC-CD45/CD45P

Fixed Mini-dome Cameras. SSC-CD Series SSC-CD79/CD79P SSC-CD77/CD77P SSC-CD75/CD75P SSC-CD49/CD49P SSC-CD45/CD45P Fixed Mini-dome Cameras SSC-CD Series SSC-CD79/CD79P SSC-CD75/CD75P SSC-CD49/CD49P SSC-CD45/CD45P Reproducing Extremely Clear and Detailed Images, Sony Analog Mini-dome Cameras are Ideal for use in Commercial

More information

7 Series HD SDI+IP Dual Output PTZ Camera

7 Series HD SDI+IP Dual Output PTZ Camera 7 Series HD SDI+IP Dual Output PTZ Camera USER MANUAL VERSION: VCC-7HDSN-M-10162017 Part One VCC-7HD20S-2SMN VCC-7HD30S-2SMN 2017 Bolin Technology 1 Contents IMPORTANT INFORMATION... 3 WHAT S IN THE BOX...

More information

VITEK VTD-IR2811DN FEATURES: 1/3 Color CCD with 560 TV of Lines Resolution (600 TV Lines in B/W mode)

VITEK VTD-IR2811DN FEATURES: 1/3 Color CCD with 560 TV of Lines Resolution (600 TV Lines in B/W mode) VTD-IR2811DN 560 TV Line Indoor Day/Night IR Dome Camera VITEK FEATURES: 1/3 Color CCD with 560 TV of Lines Resolution (600 TV Lines in B/W mode) 20 Infrared LEDs enable Viewing in Total Darkness up to

More information

User Manual V Model: AV-1082W. HD Video Conferencing Camera (USB 2.0) Model: AV-1082G. Please Read this User Manual

User Manual V Model: AV-1082W. HD Video Conferencing Camera (USB 2.0) Model: AV-1082G. Please Read this User Manual Model: AV-1082W HD Video Conferencing Camera (USB 3.0) Model: AV-1082G HD Video Conferencing Camera (USB 2.0) User Manual V1.0 Please Read this User Manual throughout before using www.avipas.com 1 Preface

More information

PTZ Conference Room USB Camera

PTZ Conference Room USB Camera PTZ Conference Room USB Camera P/N 35520 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines.

More information

SVD-4120A SSNR Low Light, WDR, Day & Night Vandal-Proof Color Dome Camera

SVD-4120A SSNR  Low Light, WDR, Day & Night Vandal-Proof Color Dome Camera Low Light, WDR, Day & Night Vandal-Proof Color Dome Camera SVD-4120A www.samsungcctv.com Built-in chip Originally Developed by Samsung Techwin Crisp and clear images in any light Samsung Techwin's new

More information

USB3.0 HD PTZ Camera

USB3.0 HD PTZ Camera USB3.0 HD PTZ Camera USER MANUAL VERSION: 3HDU-M-07092017 UCC-3HD10S-U3 UCC-3HD10B-U3 UCC-3HD05B-U3 2017 Bolin Technology 1 Contents IMPORTANT INFORMATION... 3 WHAT S IN THE BOX... 5 OVERVIEW... 6 CAMERA

More information

10. RS-232C communication

10. RS-232C communication 10. RS-232C communication PB9200(P5XMLA) Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer

More information

KTC-205C Color Camera

KTC-205C Color Camera The Kalatel KTC-205C is a color video camera that employs a 1/3-in. interline transfer chargecoupled device (CCD). It has a solid-state imaging device with a maximum of 270,000 (NTSC) picture elements

More information

HTSD12XH. 960H 12X Optical Zoom. Indoor / Outdoor Speed Dome Camera

HTSD12XH. 960H 12X Optical Zoom. Indoor / Outdoor Speed Dome Camera HTSD12XH 960H 12X Optical Zoom Indoor / Outdoor Speed Dome Camera Please read this manual thoroughly before operation and keep it handy for further reference. CONTENTS Warning & Caution What s in the Box?

More information

HD Color Video Camera. User Manual

HD Color Video Camera. User Manual HD Color Video Camera User Manual Preface: Thanks for using our HD color video conference camera. The manual introduces the function, installation and operation of the HD camera. Prior to installation

More information

WIDE DYNAMIC RANGE CAMERA USER MANUAL

WIDE DYNAMIC RANGE CAMERA USER MANUAL WIDE DYNAMIC RANGE CAMERA USER MANUAL Contents 1. SAFETY PRECAUTIONS... 2 2. INTRODUCTION... 3 3. FEATURES... 4 4. PACKING LIST... 5 5. NAME and FUNCTION of EACH PART... 6 6. INSTALLATION... 8 6.1 Native

More information

OPERATING MANUAL DIGITAL COLOR CCD CAMERA OKI USA DAY & NIGHT SERIES

OPERATING MANUAL DIGITAL COLOR CCD CAMERA OKI USA DAY & NIGHT SERIES OPERATING MANUAL DIGITAL COLOR CCD CARA OKI USA DAY & NIGHT SERIES Model SDN-6420 SDN-6420P 420 TV LINE Model SDN-6520 SDN-6520P 520 TV LINE Power 24VAC/12VDC 85V~265VAC 1/3 SONY Super HAD CCD 1 General

More information

DSP Color CCD Cameras CV-S3200/3300. Operation Manual. (Rev.B)

DSP Color CCD Cameras CV-S3200/3300. Operation Manual. (Rev.B) DSP Color CCD Cameras Operation Manual (Rev.B) DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC EMC (ELECTROMAGNETIC COMPATIBILITY) WE HEREWITH DECLARE THAT THIS PRODUCT COMPLIES

More information

7 Series HD PTZ Camera

7 Series HD PTZ Camera 7 Series HD PTZ Camera USER MANUAL VERSION: VCC-7HD-M-11142018 VCC-7HD20S-2SMC VCC-7HD30S-2SMC 2018 Bolin Technology 1 Contents IMPORTANT INFORMATION... 3 WHAT S IN THE BOX... 5 OVERVIEW... 6 CAMERA VERSION...

More information

CM55-VCU USB 3.0 HD PTZ Camera User Manual v2.1

CM55-VCU USB 3.0 HD PTZ Camera User Manual v2.1 CM55-VCU USB 3.0 HD PTZ Camera User Manual v2.1 www.avonic.eu 1 Safety Notes Before installing the device, please read this manual carefully and follow instructions indicated to ensure proper operation.

More information

CF /BF SERIES CAMERAS

CF /BF SERIES CAMERAS Lens not Included CF /BF SERIES CAMERAS INSTRUCTION MANUAL Wide Dynamic NTSC Hi-Resolution Dual Power Wide Dynamic PAL Hi-Resolution Dual Power Wide Dynamic PAL Hi-Resolution Mains Power PAL Hi-Resolution

More information

CV620-BK2/WH2 Full-HD PTZ Camera

CV620-BK2/WH2 Full-HD PTZ Camera CV620-BK2/WH2 Full-HD PTZ Camera Installation Guide Ver 1.1-100517a Table of Contents Safety Instructions... 4 Package Contents... 6 Product Overview... 7 3.1 Overview... 7 3.2 Description of LED indicator...

More information

VC-A60S PTZ Video Camera. Installation Guide - English

VC-A60S PTZ Video Camera. Installation Guide - English VC-A60S PTZ Video Camera Installation Guide - English [Important] To download the latest version of Quick Start Guide, multilingual user manual, software, or driver, etc., please visit Lumens http://www.mylumens.com

More information

DS-2AF7264/7268-AW. High Definition IR Wiper PTZ Dome Camera

DS-2AF7264/7268-AW. High Definition IR Wiper PTZ Dome Camera DS-2AF7264/7268-AW High Definition IR Wiper PTZ Dome Camera Key features IR function: 0 Lux minimum illumination Up to120m IR distance IR light MTBF reaching up to 30,000 hours System function: SONY high

More information

HuddleCamHD 30x USB 3.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL

HuddleCamHD 30x USB 3.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL HuddleCamHD 30x USB 3.0 PTZ CAMERA INSTALLATION & OPERATION MANUAL Please check HUDDLECAMHD.com for the most up to date version of this document Precautions. Safety Tips. Please read this manual carefully

More information

All Surveillance Cards

All Surveillance Cards All Surveillance Cards! " # $ %& '"( # )#*+,-+-." /# 0.' +"1 +/2,*-3*4 #" & 5+-67&,&8' 9( #0 :;; ; All Surveillance Cards?@ "( #)A.B # # / +/2,*-3*#-." ;' ( B 6( ( 0 0 # #0?-; #"("( &0-+

More information

Network Camera SNC-CS3N SNC-CS3P

Network Camera SNC-CS3N SNC-CS3P Network Camera SNC-CS3N SNC-CS3P Amazing picture quality in such an affordable and compact package the ideal network camera for remote monitoring Sony's new SNC-CS3 *1 CS mount, fixed network color camera

More information

ULISSE COMPACT UNIT WITH INTEGRATED DAY/NIGHT CAMERA

ULISSE COMPACT UNIT WITH INTEGRATED DAY/NIGHT CAMERA 2014/01/20 UNIT WITH INTEGRATED DAY/NIGHT CAMERA MAIN FEATURES Variable speed: 0.1-200 /s Pan/Tilt Horizontal continuous rotation, vertical -90 /+90 IP66 Day/Night camera 36x, 28x or 10x: True Progressive

More information

SNC-RZ30N (NTSC) SNC-RZ30P (PAL)

SNC-RZ30N (NTSC) SNC-RZ30P (PAL) PRELIMINARY NETWORK CAMERA SNC-RZ30N (NTSC) SNC-RZ30P (PAL) The Network Camera Experience - Anyone, Anytime, Anywhere Network cameras have been steadily making their way into the market over the past few

More information

Network Camera SNC-CS3N

Network Camera SNC-CS3N Network Camera SNC-CS3N Amazing picture quality in such an affordable and compact package the ideal network camera for remote monitoring Sony's new SNC-CS3N CS mount, fixed network color camera is the

More information

HDC-SDOMEO51MIR-B USER MANUAL. HD Portable Rugged PTZ Cameras

HDC-SDOMEO51MIR-B USER MANUAL. HD Portable Rugged PTZ Cameras HDC-SDOMEO51MIR-B USER MANUAL HD Portable Rugged PTZ Cameras Safety Notes Thank You for Choosing Our HD table Rugged PTZ Camera! When you open the box: 1. Check that the packing and the contents are not

More information

Low-Light Color High Speed Dome Camera

Low-Light Color High Speed Dome Camera Low-Light Color High Speed Dome Camera CCDA1425-LL High-speed dome camera High resolution ¼-inch low-light color camera (EX-View CCD) Low light sensitive to 0.05 lux 18x optical zoom (4.1 73.8 mm) 12x

More information

CI-T21H / CI-T21S. PTZ Tracking Camera 10X. User Manual English

CI-T21H / CI-T21S. PTZ Tracking Camera 10X. User Manual English CI-T21H / CI-T21S PTZ Tracking Camera 10X User Manual English AREC Inc. All Rights Reserved 2018. l www.arec.com All information contained in this document is Proprietary Preface This manual introduces

More information

Marshall Electronics

Marshall Electronics Marshall Electronics CV620-WH & CV620-BK Full HD Broadcast PTZ Camera Installation Guide To download the latest version of Quick Start Guide, software, or driver, etc., please visit Hwww.lcdracks.com Table

More information

Remote Controller. Operating Instructions. RM-IP500 Software Version 2.0

Remote Controller. Operating Instructions. RM-IP500 Software Version 2.0 4-696-257-12(1) Remote Controller Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. RM-IP500 Software Version 2.0 2017 Sony Corporation

More information