Toolmaker s Microscopes TM-505/510 OPTICAL MEASURING

Transcription

1 Toolmaker s Microscopes TM-505/510 OPTICAL MEASURING

2 Toolmaker s Microscope TM-505/510 XY Table Travel 50mm 100mm Reticles (optional) TM-510 Eyepiece protractor (Micrometer heads are optional.) APPLICATIONS Cutting tools Gear Connector Dimensions TM-505 TM-510 Unit: mm (inch) (8.17") 152 (5.98") 391 (15.39") 152 (5.98") (8.17") 321.5(12.66") (8.17") 152 (5.98") 240 (9.45") 391 (15.39") 333 (13.11") 210 (8.27") 333 (13.11") 210 (8.27") 2

3 TM-505/510 XY Table Travel 50mm 50mm TM-505 FEATURES The eyepiece section of the optical tube incorporates a vernier protractor. Angle measurement is performed easily by turning the protractor to align the cross-hair reticle with the workpiece image. Complete selection of interchangeable reticles. Both the transmitted and reflected illumination intensity can be adjusted to obtain the optimal illumination intensity for the workpiece. Two XY stages with different travel ranges, 50mmx50mm (2"x2") and 100mmx50mm (4"x2"), are available. The TM-505/510 can output XY coordinate data if optional Digimatic Micrometer Heads are used with it. Highly efficient two-dimensional data processing is available by connecting the Digimatic Micrometer Heads to an SPC tool. (Micrometer heads are optional.) MODEL SELECTION Model No. TM-505 TM-510 Order No. (Order number suffix denotes the AC power cord type equipped.) 240V AC E E Measuring unit Optional Optional XY table travel 50x50mm (2"x2")* 100x50mm (4" x2")* Table top dimensions 152x152mm (5.98"x5.98") 240x152mm (9.45"x5.98") Effective area of glass stage 96x96mm (3.78"x3.78") 150x92mm (5.91"x3.62") Maximum 5kg (11 lbbs.) 5kg (11 lbs.) workpiecec load Maximum workpiece height 115mm (4.53") 107mm (4.21") *If the stroke of the stage exceeds the measuring range of the micrometer head, use the optional gauge block. SPECIFICATIONS Optical tube Monocular with 30º depression angle 90º broken cross-hair reticle ( ) Erect image Diopter adjustable Eyepiece protractor Graduation: 1º Protractor range: 360º Minimum reading by vernier: 6' Eyepiece ( ) Magnification: 15X Field number: 13 Objective ( ) Magnification: 2X Working distance: 67mm (2.638") Numerical aperture: 0.07 Total magnification 30X Transmitted illumination Light source: tungsten bulb (24V, 2W) GIF (green) filter Light intensity adjustable Reflected illumination Oblique single-bulb illuminator Optional twin-bulb illuminator ( ) Light source: tungsten bulb (24V, 2W) Light intensity adjustable Power supply 100/110/120/220/240V AC, 50/60Hz Power consumption 100VA Mass TM-505: Approx. 14kg (30.8 lbs. ) TM-510: Approx. 15kg (33 lbs. ) 3

4 Optional Accessories Eyepieces Objectives Magnification 10X 15X 20X Order No * Field number *Standard accessory Magnification 2X 5X 10X Order No * Numerical apeture Working distance 67mm (2.638") 33mm (1.299") 14mm (.551") *Standard accessory Eyepiece-objective Performance Table Objective 2X (Standard accessory) Objective 5X ( ) Objective 10X ( ) Eyepiece 10X ( ) Eyepiece 15X (Standard accessory) Eyepiece 20X ( ) Total magnification Viewing field Depth of focus Total magnification Viewing field Depth of focus Total magnification Viewing field Depth of focus 20X ø6.5mm 158µm 30X ø6.5mm 124µm 40X ø5mm 107µm (ø.256") (ø.256") (ø.197") 50X ø2.6mm 56µm 75X ø2.6mm 47µm 100X ø2mm 42µm (ø.102") (ø.102") (ø.079") 100X ø1.3mm 24µm 150X O1.3mm 21µm 200X ø1mm 19µm (ø.051") (ø.051") (ø.039") Digital camera adapter Adapter for talking a photograph of microscope's observation image by digital camera (LCD monitor type) on the market. Possible to attach on C mount or eyepiece sleeve of microscope by combining three parts which constitue an adapter. Also to using eyepiece adapter, attachment to the eyepiece sleeve (ø35) of a microscope becomes possible. Code No Model DA-1 DA-2 DA-3 Field of view ø18 Attachment C mount, eyepiece (ø35,, ) position Applicable model: CAMEDIA (Olympus) COOLPIX (NIKON) digital camera C-200Z/2020Z/2040Z/3000Z/ 3030Z/3040Z/3100Z/ 4040Z/5050Z 900/910/950/ 990/998/ microscope VMU, FS70, FS110, FS300, 5M500, MF-A/UA, MSM400 DA-1 DA-2 DA-3 ø44 ø42 Optical adapter C mount adapter Unit: mm 38 6 ø36 ø48 Super sleeve ø36 ø

5 Versatile Reticles Metric coarse thread (P= ) Metric coarse thread (P= ) ISO metric coarse thread (P= ) ISO metric coarse thread (P= ) ISO unified thread (80-28 TPI) ISO unified thread (24-14 TPI) ISO unified thread (13-10 TPI) Unified screw thread (80-28 TPI) Unified screw thread (24-14 TPI) Unified screw thread (13-10 TPI)) Whitworth thread (60-26 TPI) Whitworth thread (24-18 TPI) Whitworth thread (16-11 TPI) NF thread (80-28 TPI), inch NF thread (24-14 TPI), inch NF thread (13-10 TOI), inch Involute gear tooth, m= (Pressure angle: 14.5º, normal rack) Involute gear tooth, m= (Pressure angle: 20º, normal rack) Concentric circle (Up to ø4mm, 0.05mm increment) Concentric circle (Up to ø2mm,.01" increment) º angle º angle º broken cross-hair* *Standard accessory Ring type fluorescent adapter This is an adapter to install the fluorescent tube circular illumination* 1 on the TM-500 series. The observation image near natural light is obtained by the lighting in a fluorescent light. It can get 2 times or more illumination compare to the oblique surface illumination system (standard accessory). It is possible to attach the outside diameter of Objective lens easily with one fixed screw. *1 This is not attached. Please buy this separately. Fixed screw (with plastic end) Fluorescent tube cirular illumination (option) Circular illuminator adapter Order No. 12AAE044 including Ring fluorescent adapter:12baf630 Clamp screw: Tip resin:

6 Optional Accessories Swivel center supports Supports a workpiece that has a center hole at both ends. The workpiece on this support can be tilted up to ±10 for precision measurement of screws, etc (for TM-505) (for TM-505) Order No Swivel range ±10º Minimum angle reading 1º (uing index line) Maximum workpiece size Horizontal support Swiveted 10º ø70 x 140 mm long (ø2.76" x 5.51"long) ø45 x 140mm (ø1.77" x 5.51") ø80 x 140 mm long (ø3.15" x 5.51"long) ø65 x 140mm (ø2.56" x 5.51") Mass 2.4kg (5.28 lbs.) 2.5kg (5.5 lbs.) Rotary tables (for TM-505) Order No Table tio diameter 112mm (4.41") 146mm (5.75") Grass plate diameter 66mm (2.60") 100mm (3.94") Rotation range 360º 360º Minimum angle reading 6' 2' Mass 1.7 kg (3.74 lbs.) 2.5 kg (5.5 lbs.) Twin-blub reflected illumination unit (for TM-510) Dial indicator attachment (for height measurement) Used to attach an optional digimatic indicator to the microscope for height measurement. Allows extended height measurements using the optional gauge block. Stem fitting hole: Ø.375" (Ø8mm with bushing) V-block with clamp Illumination provided by the two light sources generate a stereoscopic workpiece image. Used in place of the standard single-bulb reflected illumination unit. The light intensity can be adjusted as desired. Workpiece clip Can be mounted on the T-groove of the XY table. A pair of workpiece clips come Maximum workpiece diameter: 25mm (.98") Mass: 0.8kg (1.76 lbs.)

7 Versatile Holder with clamp Steel Gauge Blocks Maximum workpiece height: 35mm (1.38") Mass: 0.4kg (.88 lbs.) mm (JIS/DIN Grade 2) mm (BS Grade 2) Used to measure a workpiece which has a length exceeding the stroke (=measuring range) of the micrometer head attached. Ceramic gauge blocks (CERA Block) are also available. MEASURING UNITS (OPTIONAL) Micrometer Heads Digimatic Micrometer Heads (LCD readout) (Two units are required for an XY table.) Order No (X-axis) (Y-axis) (X-axis) (Y-axis) Range 25mm 1" Gradustion 0.005mm.0001 Instrumental error ±2µm ±.00008" Remarks Bidirectional graduation for versatile measurement Provided with non-rotating spindle tip Floating thimble allows zero setting at any spindle position Order No Range 2 (50mm) Resolution /0.001mm Instrumental error ± Functions Zero set, preset, SPC data output, counting direction switch, absolute/incremental coordinate switch, inch/mm conversion Power supply SR44 battery (x 2pcs.) Battery life 1.8 years under continuous use 7

8 DMX Digimatic Micrometer Head x2pcs. SPC Cable (1m) x2pcs. Connecting cable D 12AAD195 QM-Data200 Simplifited Key Operation 2D Data Processing Unit QM-Data200 Mitutoyo launches a new 2D data processing unit for optical instruments. The QM-Data200 can add new features of 2D coordinate measurement, image processing, etc. into your ordinary optical instruments to improve the QC control system. QM-Data200 Order No.: E adjustable stand model Optional accessories T: Foot switch Export permission by the Japanese government may be required for exporting our products according to the Foreign Exchange and Foreign Trade Law. Please consult our sales office near you before you export our products or you offer technical information to a nonresident. Specifications are subject to change without notice. Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the rights to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves may be regarded as definitive. Our products are classified as regulated items under Japanese Foreign Exchange and Foreign Trade Law. Please consult us in advance if you intend to export our products to any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls item), the customer service available for that product may be affected. If you have any questions, please consult your local Mitutoyo sales office. Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Sensor Systems Testing Equipment and Seismometer Digital Scale and DRO Systems Small Tool Instruments and Data Management Mitutoyo Asia Pacific Pte. Ltd. Company Reg No N 24 Kallang Avenue, Mitutoyo Building, Singapore Tel: (65) Fax: (65) mapsg@mitutoyo.com.sg Mitutoyo (Malaysia) Sdn. Bhd. Mah Sing Integrated Industrial Park, 4, Jalan Utarid U5/14, Section U5, Shah Alam, Selangor, Malaysia Tel: (60) Fax: (60) mmsb@mitutoyo.com.my Penang Branch Tel: (60) Fax: (60) mmsbpen@mitutoyo.com.my Johor Branch Tel: (60) Fax: (60) mmsbjhr@mitutoyo.com.my Mitutoyo (Thailand) Co., Ltd. 76/3-5, Chaengwattana Road, Kwaeng Anusaowaree, Khet Bangkaen, Bangkok 10220, Thailand Tel: (66) Fax: (66) office@mitutoyo.co.th Chonburi Branch Tel: (66) Fax: (66) Amata Nakorn Branch Tel: (66) Fax: (66) PT. Mitutoyo Indonesia Jalan Sriwijaya No.26 Desa cibatu Kec. Cikarang Selatan Kab. Bekasi 17530, Indonesia Tel: (62) Fax: (62) ptmi@mitutoyo.co.id Mitutoyo Vietnam Co., Ltd. No. 07-TT4, My Dinh - Me Tri Urban Zone, My Dinh 1 Ward, Nam Tu Liem District, Hanoi, Vietnam Tel: (84) Fax: (84) mvc-hn@mitutoyo.com.vn Ho Chi Minh City Branch Tel: (84) Fax: (84) mvc-hcmc@mitutoyo.com.vn Mitutoyo Philippines, Inc. Unit 2103, GMV Building 2, 107 North Main Avenue, Laguna Technopark, Biñan, Laguna 4024, Philippines Tel: (63) Fax: (63) mpi@mitutoyo.com.ph MAP 1247(2) Printed in Singapore (0.6)ADIS