english Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group

Transcription

1 english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group

2 Customer requests and our constant involvement in ever changing markets is motivation for icotek to continuously develop new and innovative products. Our product offering will continue to grow in an effort to meet the needs of our customers. Ideas move the move world Can't find the product that meets the demands of your application? Contact us and we will be more than happy to discuss a customized solution for you! Our experienced managers and qualified personnel are in constant pursuit of customer satisfaction. Trust our innovation. Your comments and suggestions are important to us. We look forward to hearing from you.

3 Table of contents Product groups Cable entry systems for pre-terminated cables Product group 1 Page 4-47 Cable entry systems for standard cables Product group 2 Page Strain relief systems Product group 3 Page EMC Innovations Product group 4 Page Switch cabinet accessories and earthing tapes Product group 5 Page Appendix Technical data Page

4 1Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard cables. The key feature of icotek s patented system is the split frame and split inserts which provide quick, convenient and cost effective routing of pre-terminated and standard cables. The split frame and split insert alleviate the need to cut and re-wire pre-terminated cables. Therefore, cable warranties are unaffected. Cables, pipes and conduits with various diameters can be routed due to the split frame and split inserts. When assembled correctly, the split inserts are held tightly within the frame. Correctly sizing the insert to the cable diameter ensures a high degree of protection (IP65) and provides strain relief. Benefits IP65 1. Split system Split inserts are positively guided into the frame. This ensures a tight seal around the cables and strain relief according to EN No new punch out tools required Drilling templates, as well as cut outs according to the standard dimensions for multi pole connectors (for example from standard Harting, Wieland). KEL-ER 3. Tight connection Uniquely designed frame and inserts assures a tight, secure unit. 4. Flexibility Standard inserts are designed to accomodate only one cable. Utilizing inserts that pass two and four cables greatly increases packing density. 4

5 Product group 1 Cable entry system for entering pre-terminated cables Chapter content 1 Cable entry frames KEL 24 / KEL 16 / KEL 10 / KEL-B / KEL-E Cable entry frames IP65 KEL-ER 24 / KEL-ER 16 / KEL-ER 10 / KEL-ER B Cable entry frames KEL 24 extension parts Flange enclosure KEL-FG SNAP frames KEL-SNAP Typical applications KEL / KVT for pre-terminated cables Split cable glands KVT / KVT 80 / KVT-SNAP / KVT-W90 KT ServiceBox Service box for cable inserts Inserts and plugs KT small / KT large / KTMB / DT / ST Cable entry for flat cables KEL-FL / FT Cable entry frames KEL 183 / KTMB 183 Cable entry frames KEL-JUMBO / KTF Cable entry frames KEL-QUICK Split cable glands QVT Pluggable cable glands QVT-CLICK Cable entry frames KEL-QTA / KEL-QTE Cap for attachment housings KEL-AD Inserts QT Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page tel +49 (0) fax +49 (0)

6 KEL 24 Cable entry frames V2A anti-corrosive KEL 24 also available with V2A screws. KEL 24 on request also available with threaded bushings. IP54 Description Type Order No. Inserts KT PU small large The KEL 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame , KEL KEL with V2A screws Either a cut out of 36 mm or 46 mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables KEL KEL 24 7 with V2A screws , Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof ,50 KEL KEL 24 5 with V2A screws KEL Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / Page mm ,50 KEL 24 4 with V2A screws KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector KDR Base plates FP Flanged plates MP Module plates Page Page 20 Page Page Page Page

7 KEL-ER 24 Cable entry frames V2A anti-corrosive KEL-ER also available with V2A screws. KEL-ER on request also available with threaded bushings. Split inserts Type Order No. Inserts KT PU Description small large IP KEL-ER KEL-ER with V2A screws KEL-ER KEL-ER 24 7 with V2A screws ,8 5, Split cable entry system for routing pre-terminated cables providing a protection class of IP65. Routing, sealing and providing strain relief for cable diameters from 3 to 15 mm (KT small) and 16 to 34 mm (KT large). The new cable entry system is easy to install. Cable inserts are placed into compartments and are securely fixed to the frame during assembly. The KEL-ER 24 frame matches exactly the cutout dimensions for 24-pole standard industrial connectors KEL-ER KEL-ER 24 4 with V2A screws , Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP65, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / page mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector KDR Base plates FP Flanged plates MP Module plates Page Page 20 Page Page Page Page

8 KEL 16 Cable entry frames V2A anti-corrosive Split inserts KEL 16 also available with V2A screws. KEL 16 on request also available with threaded bushings. IP54 Description Type Order No. Inserts KT PU small large The KEL 16 matches exactly the cut-out dimensions of 16-pole standard industrial connectors. The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame. Either a cut out of 36 mm or 46 mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables. KEL KEL 16 8 with V2A screws KEL KEL 16 5 with V2A screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof KEL KEL 16 4 with V2A screws KEL Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / Page mm KEL 16 2 with V2A screws KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector KDR Base plates FP Flanged plates Page Page 20 Page Page Page

9 KEL-ER 16 Cable entry frames V2A anti-corrosive KEL-ER also available with V2A screws. KEL-ER on request also available with threaded bushings. Type Order No. Inserts KT PU Description small large IP KEL-ER KEL-ER 16 8 with V2A screws KEL-ER KEL-ER 16 5 with V2A screws , Split cable entry system for routing pre-terminated cables providing a protection class of IP65. Routing, sealing and providing strain relief for cable diameters from 3 to 15 mm (KT small) and 16 to 34 mm (KT large). The new cable entry system is easy to install. Cable inserts are placed into compartments and are securely fixed to the frame during assembly. The KEL-ER 16 frame matches exactly the cutout dimensions for 24-pole standard industrial connectors ,8 KEL-ER KEL-ER 16 2 with V2A screws , Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP65, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / p mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector KDR Base plates FP Flanged plates Page Page 20 Page Page Page

10 KEL 10 Cable entry frames V2A anti-corrosive Split inserts KEL 10 also available with V2A screws. KEL 10 on request also available with threaded bushings. IP54 Description Type Order No. Inserts KT PU small large The KEL 10 matches exactly the cut-out dimensions of 10-pole standard industrial connectors. 98,30 83 KEL The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame ,50 KEL 10 6 with V2A screws Either a cut out of 36 mm or 46 mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables. 98,30 83 KEL Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof ,50 KEL 10 3 with V2A screws Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / Page mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page Page 20 Page

11 KEL-ER 10 Cable entry frames V2A anti-corrosive KEL-ER also available with V2A screws. KEL-ER on request also available with threaded bushings. Split inserts Type Order No. Inserts KT PU Description small large IP65 98,3 83 KEL-ER KEL-ER 10 6 with V2A screws KEL-ER ,3 83 5, Split cable entry system for routing pre-terminated cables providing a protection class of IP65. Routing, sealing and providing strain relief for cable diameters from 3 to 15 mm (KT small) and 16 to 34 mm (KT large). The new cable entry system is easy to install. Cable inserts are placed into compartments and are securely fixed to the frame during assembly. The KEL-ER 10 frame matches exactly the cutout dimensions for 10-pole standard industrial connectors. KEL-ER 10 3 with V2A screws , Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according EN Vibration proof Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP65, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / p mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page Page 20 Page

12 KEL-B Cable entry frames V2A anti-corrosive Split inserts KEL-B also available with V2A screws. KEL-B on request also available with threaded bushings. IP54 Description Type Order No. Inserts KT PU small large 72,8 7,4 58 7,4 The KEL-B matches exactly the cut-out dimensions of mm measuring instruments. The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame. For routing cables and conduits up to 34 mm diameter ,8 7,4 58 7,4 KEL-B KEL-B4 with V2A screws KEL-B Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Space saving shape Small cut-out, high packing density Strain relief according EN Vibration proof KEL-B1 with V2A screws Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / Page mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector FP Flanged plates Page Page 20 Page Page

13 KEL-ER B Cable entry frames V2A anti-corrosive KEL-ER also available with V2A screws. KEL-ER on request also available with threaded bushings. Type Order No. Inserts KT PU Description small large IP65 72,8 58 KEL-ER B KEL-ER B4 with V2A screws ,8 58 5, Split cable entry system for routing pre-terminated cables providing a protection class of IP65. Routing, sealing and providing strain relief for cable diameters from 3 to 15 mm (KT small) and 16 to 34 mm (KT large). The new cable entry system is easy to install. Cable inserts are placed into compartments and are securely fixed to the frame during assembly. KEL-ER B The KEL-ER B matches exactly the cut-out dimensions of mm measuring instruments. KEL-ER B1 with V2A screws ,8 Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Small cut-out, high packing density Strain relief according EN Vibration proof Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP65, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / p mm KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector FP Flanged plates Page Page 20 Page Page

14 KEL-E Cable entry frames V2A anti-corrosive KEL-E also available with V2A screws. KEL-E on request also available with threaded bushings. Description Type Order Cut-out Inserts KT PU No. [mm] small large The cable entry frames KEL-E are particularly suited for flat connectors. The small frame is ideal for applications with limited space. 39,5 26,5 72,8 58 5,8 KEL-E KEL-E2 with V2A screws For inserting cables up to 17 mm diameter. 98,3 83 KEL-E Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Space saving shape Optimal for D-Sub connectors Strain relief according EN Vibration proof 39,5 26, ,8 KEL-E3 with V2A screws KEL-E Flame class Protection class Temperature Properties Drilling template Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free See Page mm 39,5 26,5 39,5 26, ,8 5,8 KEL-E4 with V2A screws KEL-E KEL-E5 with V2A screws KT Cable inserts KEL-EMC Cable collector Page Page

15 KEL 24-E Cable entry frames V2A anti-corrosive KEL 24-E on request available with threaded bushings. KEL 24-E also available with V2A screws. Type Order No. Inserts KT PU Description small large KEL E ,5 KEL E with V2A screws , ,8 The KEL 24-E offers a larger frame size for routing a greater amount of cables, pipes or conduits. 147 KEL E ,5 The cable entry frames KEL24-E series are KEL frames extended with an additional middle frame for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 60 cables. 83,5 5,8 38 KEL E with V2A screws KEL 24 9-E ,5 32,5 38 5,8 Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according EN Vibration proof KEL 24 9-E with V2A screws KEL E KEL E with V2A screws ,5 32, ,8 Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm / Page mm KT Cable inserts KEL-EMC Cable collector Page Page

16 KEL 24-MT Cable entry frames V2A anti-corrosive KEL 24-MT also available with V2A screws. KEL 24-MT on request available with threaded bushings. Description Type Order No. Inserts KT PU small large 5,8 The KEL 24-MT provides additional cable routing possibilities - route up to 80 cables. The cable entry frames KEL 24-MT series are KEL frames extended with an additional middle frame for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 80 cables KEL MT KEL MT with V2A screws ,8 KEL MT KEL MT with V2A screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according EN Vibration proof KEL MT KEL MT with V2A screws Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts -40 C to C (static) Halogen-free, silicone-free mm / Page mm 5, KEL MT KEL MT with V2A screws , KT Cable inserts KEL-EMC Cable collector Page Page ,8 KEL 24 8-MT KEL 24 8-MT with V2A screws

17 KEL 24-2MT Cable entry frames V2A anti-corrosive KEL 24-2MT on request available with threaded bushings. KEL 24-2MT also available with V2A screws. Type Order No. Inserts KT PU Description small large KEL MT ,8 KEL MT with V2A screws KEL MT KEL MT with V2A screws , The KEL 24-2MT is our largest frame offering with the ability to route up to 120 cables. The cable entry frames KEL 24-2MT series are KEL frames extended with two additional middle frames for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 120 cables. KEL MT KEL MT with V2A screws , Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according EN Vibration proof KEL MT KEL MT with V2A screws , Flame class Protection class Temperature Properties Cut-out dimensions Height KEL Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts -40 C to C (static) Halogen-free, silicone-free mm / Page mm 5, KEL MT KEL MT with V2A screws KT Cable inserts KEL-EMC Cable collector Page Page

18 KEL-FG Flange enclosure V2A anti-corrosive Split inserts KEL-FG also available with V2A screws. KEL-FG on request available with threaded bushings. Description Type Order No. Inserts KT PU small large 129,7 KEL-FG A The cable entry frames KEL-FG are suited for installation, sealing and strain relief of preterminated cables and conduits at an angle of 90 to the cabinet. 57,50 17,50 KEL-FG A10 with V2A screws For routing cables and conduits up to 34 mm diameter ,72 KEL-FG A Installation at an angle of 90 0 to the cabinet Mechanical protection of cable directly at the place of entry Protection against water spray and drips Warranty of pre-terminated cables remains Strain relief according EN Vibration proof 57, ,7 17,50 KEL-FG A7 with V2A screws KEL-FG A , , ,50 17,50 KEL-FG A4 with V2A screws Flame class Protection class Temperature Properties Cut-out dimensions ABS UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm, Page , KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page Page 20 Page

19 57,50 79,50 62,50 5,50 56, KEL-FG Flange enclosure Type Order No. Inserts KT PU Description small large KEL-FG B ,2 KEL-FG B4 with V2A screws The cable entry frames range KEL-FG are suited for installation, sealing and strain relief of pre-terminated cables and conduits at an angle of 90 to the cabinet. For routing cables and conduits up to 34 mm diameter. KEL-FG B ,2 KEL-FG B1 with V2A screws ,50 Installation at an angle of 90 0 to the cabinet Mechanical protection of cable directly at the place of entry Protection against water spray and drips Warranty of pre-terminated cables remains Strain relief according EN Vibration proof 57,50 38 Flame class Protection class Temperature Properties Cut-out dimensions ABS UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free mm, Page KT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page Page 20 Page

20 KEL-SNAP SNAP frames Description Type Order No. Fits Cut-out PU for [mm] 38 The KEL-SNAP frame provides quick assembly of the KEL system when necessary KEL-SNAP B KEL-B KEL-ER B KEL-QUICK B Control panels already in the factory can be equipped with the KEL-SNAP frame allowing a simple push in of the KEL frame once the associated equipment is delivered to the factory. A cut-out of 46 mm also can be chosen instead of 36 mm. Thus pre-fabricated multi pole connectors can be used ,5 KEL-SNAP KEL 10 KEL-ER , Upon disassembly (e.g. maintenance) screwing and unscrewing of KEL-frame is not necessary Previously assembled KEL frames are quickly and easily attached Integrated gasket in SNAP-frame Drilling template identical to KEL-frame (except KEL-SNAP B4) ,5 5,5 KEL-SNAP KEL-SNAP KEL 16 KEL-ER 16 KEL-QUICK 16 KEL 24 KEL-ER 24 KEL-FG A KEL-QUICK Flame class Protection class Temperature Properties Drilling template Polyamide (PA) UL94-V0, self-extinguishing IP54-40 C to C (static) Halogen-free, silicone-free See Page ,50 71, KEL-SNAP 24E KEL 24-E ,5 KEL Cable entry frames KEL-ER Cable entry frames KEL-QUICK Cable entries MP Module plates BPK-SNAP Blind plates Page 6-14 Page 6-14 Page Page Page KEL-SNAP 24MT KEL 24-MT ,5 20

21 Typical applications KEL / KVT for pre-terminated cables KEL 24 x - Page 6 Routing of partially pre-terminated cables through the switch cabinet base with sealing rate IP54. KEL Page 10 / BPK 24 - Page 132 Routing of 6 cables with one cable entry frame. Another cut-out is sealed by a plastic blind plate BPK 24. KEL MT - Page 16 Routing of 6 large cables up to 34 mm with one cable entry frame and one cut-out. KEL-FG A10 - Page 19 In conjunction with cable drag chains for strain relief and cable routing into a integrated switch cabinet. KVT 50-W90 - Page 26 Cable routing into a control panel at a 90 degree angle with KVT-W90. KEL-JUMBO 2 - Page 38 / KEL 24 x - Page 6-14 Routing of conduits and large cables in the vehicle frame. 21

22 KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses Polyamide locknuts are included in the shipment KVT 25* M Length: 14 mm 10 For routing SUB-D, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required. M25x1,5 * max. Cable diameter 15 mm Locknuts KVT M Length: 14 mm 10 Special locknuts with cut-outs are separate available. The cut-out dimensions are listed on page M32x1,5 KVT 32 + KGM-SUB-D M Length: 14 mm 10 KGM-SUB-D9 fits SUB-D9 connectors (Required wall cut-out: 36 mm, PU: 10) Order No Order No KVT M Length: 14 mm 10 KGM-PB fits DVI and PROFIBUS connectors (Required wall cut-out: 42 mm, PU: 10) Order No Order No KGM-SUB-D25 fits SUB-D25 connectors (Required wall cut-out: 50 mm, PU:10) Order No Order No KVT 40 + KGM-PB M Length: 14 mm 10 22

23 KVT Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT 50 2 KVT KGM-SUB-D M Length: 14 mm M Length: 14 mm 5 5 Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment KVT GM 63 ** M Length: 14 mm 5 70, KVT GM 63 ** M Length: 14 mm 5 M63x1,5 Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) grey (similar RAL 7035) black UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free Metric standard sizes KT Cable inserts KVT-EMC bracket Locknuts Page Page 113 Page ** Locknut GM 63 (brass-nickel plated) is included in delivery. *** Locknut KGM63 (Polyamide) is included in delivery.

24 KVT 80 Split cable glands Description Type Order No. Inserts KT PU small large 100 The KVT 80 split cable glands are designed for routing and sealing pre-terminated cables. KVT By connecting the two half-shells with attached screws, the inserts provide sufficient pressure on the routed cables to obtain a high degree of strain relief. The KVT 80 can be fitted to wall thicknesses from 1.5mm to 10mm. 78,2 Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Quick and easy assembly from the front side Strain relief according EN ,2 KVT Note When mounting the KVT 80 on sheet metal, we recommend the following torque values: 1.5 mm sheet = 1 Nm From 2.0 mm sheet = 1.5 Nm Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) Screws: Stainless steel grey (similar RAL 7035) black UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free 80 mm diameter KT Inserts Page

25 KVT-SNAP Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT-SNAP M Length: 11 mm 10 KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Pre terminated cables can be routed through thick walls (> 5 mm) e.g. into cast junction boxes by using the model KVT-SNAP, without the use of tools. KVT-SNAP M Length: 11 mm 10 * For KVT 63 a locknut M63 (brass-nickel plated) is included in delivery. Assembly KVT-SNAP 63 4* M Length: 11 mm 5 SNAP ring is screwed into metric thread tapped into housing (or it can be fastened with a locknut) Once the SNAP ring is affixed to the housing the KVT equipped with cables is simply pushed into the SNAP ring. Quick and easy installation! KVT-SNAP 63 1* KGM M Length: 11 mm PA M Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) grey (similar RAL 7035) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free Metric standard cut-outs KGM PA M SW50 M40x1,5 KGM PA M KT Cable inserts KVT-EMC bracket Locknuts Page Page 113 Page

26 KVT-W90 Split cable glands Description Type Order No. Inserts KT Thread PU with locknut small large Thread length The split KVT-W90 cable glands are used to insert and seal pre-terminated cables and conduits at a 90 0 angle. KVT 32-W M Length: 11.5 mm 10 In particular, the KVT 50-W90 is perfectly suited to hold corrugated or smooth hoses. A large number of cable entry inserts is available to the user. Polyamide locknuts are included in the shipment. GMT M Installation at an angle of 90 0 to the cabinet Insertion of pre-terminated cables and conduits Warranty of pre-terminated cables remains Suitable for standard or metric cut-outs 14,50 46,50 62 M50x1,5 KVT 50 4-W M Length: 11.5 mm 5 Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) grey (similar RAL 7035) black UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free Metric standard cut-outs KVT 50 1-W M Length: 11.5 mm 5 KT Cable inserts KVT-EMC bracket WST Conduit, split Locknuts Page Page 113 Page 138 Page 148 GMT M

27 KT ServiceBox Service box for cable inserts KT ServiceBox for cable inserts Convenient - everything readily available! The service box is perfect for installations and service calls. The KT Service box ensures your KT inserts are readily available. Order No Content Cable inserts, small: KT for cables 2-17 mm BTK blind inserts KTMB multi-range inserts KT-ASI for ASI-Bus cables Cable inserts, large: KT for cables mm BTG blind inserts / ATG adapter inserts KTMB multi-range inserts : KEL-frames KVT split cable gland KZL strain relief plate 1 Cable template The correct size of the KT inserts can easily be determined by using the cable template. Determining the diameter of the cable using the cable template Selecting the KT inserts according the data on the cable template Cable templates can also be ordered separatly. Order-No

28 KT Inserts, small Description Type Order No Order No Clamping range PU grey black KT cable inserts small are used with the following cable entry frames: BTK BTK Blind insert 10 KT mm 10 KT mm 10 KEL(-ER) Page 6-14 KEL-FG Page KVT Page KVT-W90 Page 26 The model range KT small is designed for cable diameters from 2 to 17 mm. Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. KT grey Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to+ 90 C (static) Halogen-free, silicone-free KT mm 10 KT mm 10 KT mm 10 KT KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT oval KTs mm 10 KTs mm 10 KT S1 KT oval approx. 8 4 mm 10 KT black Flame class Temperature Properties Elastomer UL94-HB - 30 C to + 90 C (static) Higher chemical resistance, UV-stabilized KT tele KT tele1 KT S KT tele Telephone cable 10 KT tele Data cable RJ12 10 KT tele2 KT tele Data cable RJ10 / RJ

29 KT Inserts, small Type Order No Order No Clamping range PU Description grey black KT ø 2 mm 10 KT ø 3 mm 10 KT 2 KT ø 4 mm 10 KT ø 5 mm 10 KT ø 6 mm 10 KT ø 7 mm 10 KT ø 8 mm 10 KT cable inserts small are used with the following cable entry frames: KEL(-ER) Page 6-14 KEL-FG Page KVT Page KVT-W90 Page 26 KT ø 2 mm 10 KT ø 3 mm 10 KT ø 4 mm 10 KT ø 5 mm 10 KT ø 6 mm 10 KT-ASI ASI-cable 10 KT-ASI2 rl ASI-cables 10 KT-ASI2 ll ASI-cables 10 KT 4 KT ASI2 rl KT ASI2 ll The model range KT small is designed for cable diameters from 2 to 17 mm. Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. KT grey Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to+ 90 C (static) Halogen-free, silicone-free KT black Flame class Temperature Properties Elastomer UL94-HB - 30 C to + 90 C (static) Higher chemical resistance, UV-stabilized 29

30 KT Inserts, large 41,50 42 Description Type Order No. Order No. Clamping range PU grey black ATG ATG Adapter insert 10 The KT inserts large accept a wide range of cable diameters from 16 to 34 mm. They are used with the following cable entry frames: KEL(-ER) Page 6-14 KVT / KVT-W90 Page KEL 183 Page 36 ATG adapter inserts provide the possibility to hold a small KT insert to reduce the clamping range down to 2 mm. BTG BTG Blind insert or 5-20 mm 10 KT grey Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to+ 90 C (static) Halogen-free, silicone-free KT black Flame class Temperature Properties Elastomer UL94-HB - 30 C to + 90 C (static) Higher chemical resistance, UV-stabilized KT 28 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 KT mm 10 30

31 41,5 KTMB Inserts, multi-range ,5 21 KTMB large KTMB small Type Order No. Size Clamping range PU Description grey KT KTMB-A KT small mm 10 KTMB-D KTMB-B KT small mm 10 KTMB-C KT small mm 10 KTMB-D KT small mm 10 KTMB-E KT small mm 10 KTMB The KTMB inserts accept a wide range of cable diameters. A great benefit when exact cable diameter is not known in advance. The KTMB inserts are not split and therefore only usable for cables without connectors. KTMB grey Cross section KTMB Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to+ 90 C (static) Halogen-free, silicone-free KTMB-G KT large mm 10 KTMB-H KT large mm 10 KTMB-I KT large mm 10 KTMB-J KT large mm 10 The correct size of the KT inserts can easily be determined by using the cable template. Determining the diameter of the cable using the cable template Selecting the KT inserts according the data on the cable template KTMB-K KT large mm 10 Order-No

32 DT Cable entry inserts Description Type Order No. Number of PU cables 41,5 The DT cable inserts are designed for standard cables (without connectors). A large number of cables can be routed utilizing minimal space ,5 DT max. 6.5 mm 2 max mm 10 DT inserts are designed to fit in KT large insert spaces: 41,5 KEL 24 / 16 / 10 / -B Page 6-14 KEL-ER 24 / 16 / 10 / B Page 6-14 KEL 24 Extensions Page KEL 183 Page ,5 41,5 DT max. 7.1 mm 10 Combination of routing pre-terminated and standard cables with one cable entry frame Enables a sub-assembly of cable harnesses High packing density 44 40,5 41,5 DT max. 6.5 mm 3 max. 9.5 mm 3 max mm ,5 DT max. 9.5 mm 10 Flame class Protection class Temperature Properties Elastomer UL94-V0, self-extinguishing IP54-40 C to + 90 C (static) Halogen-free, silicone-free 32

33 ST Plugs Type Order No. Diameter Length PU Description D L ST mm 25 mm 25 D ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 L Plugs are used to close either KT inserts or KEL-DPZ cable entry plates not equipped with cables. Perfect for appplications where cables have been removed. Sealing unused cable entries Flame class Protection class Temperature Properties KT + DT Cable inserts Cable entry plates DPZ Cable entry plates DP Polyamide (PA), white UL94-V0, self-extinguishing IP54-40 C to C Halogen-free, silicone-free Page Page Page ST mm 20 mm 25 ST mm 20 mm 25 ST ASI mm 25 33

34 KEL-FL Cable entry for flat cables Description Type Order Cut-out Inserts PU No. [mm] KT FT 39,5 26, ,8 58 5,8 KEL-FL A KT 1 FT-1 10 The KEL-FL range enables a simple, fast and flexible cable routing and sealing of flat wires. Split or non-split inserts can be utilized. 39,5 26, ,3 83 5,8 KEL-FL B KT 1 FT-2 10 Innovative construction of the inserts compensates for manufacturing inconsistencies in flat cables ,5 26,5 98,3 83 5,8 KEL-FL C KT 1 FT ,5 26,5 13 5,8 KEL-FL D KT 1 FT-3 10 Routing of flat cables in combination with pre-terminated round cables by using a single KEL cable entry frame Space saving shape 39,5 39,5 26, , ,8 5,8 KEL-FL E KEL-FL F KT 1 FT-2 0 KT 2 FT Flame class Protection class Temperature Properties Drilling template Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free See Page ,5 39,5 26, , ,8 5,8 KEL-FL G KEL-FL H KT 1 FT-1 2 KT 1 FT ,5 26,5 13 5,8 KEL-FL I KT 2 FT-1 10 KT Cable inserts, small FT Cable inserts, flat KEL-EMC Cable collector Page Page 35 Page ,5 26, ,8 KEL-FL J KT 1 FT ,5 26,5 13 5,8 KEL-FL K FT-1 1 FT ,5 26,5 13 5,8 KEL-FL L FT

35 FT Inserts for flat cables Type Order No. Clamping range PU Description grey FT Blind insert 5 FT-1 A Width: mm Thickness: mm 5 The range of FT inserts are used to route flat cables. Suitable cable entry frames are the KEL-FL range (see page 34). FT-1 B Width: mm Thickness: mm 5 Innovative construction of the inserts compensates for manufacturing inconsistencies in flat cables. FT-1 C Width: mm Thickness: mm 5 FT-1 F Width: mm Thickness: mm FT Blind insert 5 FT-2 A Width: mm Thickness: mm 5 5 Routing of flat wires with various dimensions Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to + 90 C (static) Halogen-free, silicone-free FT-2 B Width: mm Thickness: mm 5 KEL-FL Cable entry frames Page 34 FT-2 C Width: mm Thickness: mm 5 FT Blind insert 5 FT-3 A Width: mm Thickness: mm 5 FT-4 A Width: mm Thickness: mm 5 FT Blind insert 5 35

36 KEL 183 Cable entry frames V2A anti-corrosive KEL 183 also available with V2A screws. Description Type Order.No. Inserts KT PU KT 183 KT large KEL The split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter up to 75 mm and to seal in accordance with IP KEL with V2A screws For cables up to 34 mm the cable inserts KT large can be used. With the split cable inserts, pre-terminated cables can be routed KEL For cables up to 75 mm we have created inserts KTMB for KEL 183 (see page 37). These are not split and have a defined area for pushing the cable through KEL with V2A screws KEL Installation of cables up to 75 mm Inserts allow dynamic and flexible movement of rigid cables Retrofitting and maintenance can be carried out easily and quickly KEL with V2A screws Flame class Protection class Temperature Properties Cut-out dimensions Polyamide (PA) UL94-V0, self-extinguishing IP54 with gasket and correct selection of the cables - 40 C bis C (static) Halogen-free, silicone-free See page KTMB Cable inserts for KEL 183 DT/ KT Cable inserts Page 37 Page

37 KTMB Inserts for KEL 183 Type Order.No. Clamping range PU grey KTMB-O Blind insert 1 KTMB-P mm 1 The inserts KTMB-P to KTMB-S are suitable for cable diameters up to 75 mm. These inserts can be used with the KEL 183 cable entry frames. KTMB-Q mm 1 These multi-range inserts are not split and have a defined area for pushing the cable through. KTMB-R mm 1 The blind insert KTMB-O is completely closed. After cutting the membrane (cable diameter minus 10 mm) it can be used also as a multi diameter insert for cables up to 55 mm. KTMB-S mm 1 Flame class Protection class Temperature Properties Elastomer UL94-V0, self-extinguishing IP54-40 C bis + 90 C (static) Halogen-free, silicone-free KEL 183 Cable entry frames Page 36 37

38 KEL-JUMBO Cable entry frames V2A anti-corrosive KEL-JUMBO also available with V2A screws. Description Type Order No. Dimension PU length width height ,50 KEL-JUMBO The KEL-JUMBO cable entry system for installation of cables and conduits with a diameter up to 65 mm, especially suited for supply cables ,50 KEL-JUMBO 1 with V2A screws The innovative insert design enables dynamic and flexible movement. 7 We recommend round cut-outs, which can be made using standard tools ,50 KEL-JUMBO Suggested cut-out: cable diameter % ,50 KEL-JUMBO 2 with V2A screws Installation of cables up to 65 mm KTF-inserts allow dynamic and flexible movement Retrofitting and maintenance can be carried out easily and quickly Strain relief according EN Flame class Protection class Temperature Properties Cut-out dimensions Polyamide (PA) UL94-V0, self-extinguishing IP54-40 C to C (static) Halogen-free, silicone-free Round, cable diameter +15% KTF Cable inserts KDR2 Split base plates MP Module plates Page 35 Page Page

39 KTF Inserts for KEL-JUMBO KT large KTA KTF Type Order No. Clamping range PU grey KTF Blind Insert 1 KTA Adapter Insert for KT large 1 The inserts range KTF are suitable for cable diameters up to 65 mm. KTF mm 1 KTF mm 1 Suitable KEL-JUMBO cable entry frames, see page 38. Comparativly smaller diameter cables can be utilized with Jumbo Frames by using adapter insert. KTF mm 1 KTF mm 1 KTF mm 1 KTF mm 1 Flame class Protection class Temperature Properties KEL-JUMBO Cable entry frames KT large Elastomer UL94-V0, self-extinguishing IP54-40 C to + 90 C (static) Halogen-free, silicone-free Page 38 Page 30 KTF mm 1 KTF mm 1 39

40 KEL-QUICK Cable entry frames Description Type Order No. Cut-out Inserts PU [mm] The KEL-QUICK range is a compact system to route and seal assembled cables KEL-QUICK B QT 10 After populating the entry frame with inserts and cables, the two halves of the cable entry frame are SNAPped together without using tools. Inserts of the QT range are used. 5, KEL-QUICK B QT 10 Quick and safe assembly without using any tools or screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts ,5 KEL-QUICK QT 10 Flame class Protection class Temperature Properties Drilling template Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free See Page ,5 QT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page 47 Page 20 Page

41 KEL-QUICK Cable entry frames Alternative fastening: For quick fastening of KEL-QUICK we developed QUICK-PIN. The expansion pins are pressed into the existing bore holes. The flat seal and the KEL-QUICK cable entry frame will be fixed by pressing the threaded pins into the expansion pins. Description Type Order No. Cut-out Inserts PU [mm] KEL-QUICK QT 10 The KEL-QUICK range is a compact system to route and seal assembled cables. 5,5 After populating the entry frame with inserts and cables, the two halves of the cable entry frame are snapped together without using tools KEL-QUICK QT 10 Inserts of the QT range are used ,5 Quick and safe assembly without using any tools or screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts KEL-QUICK QT 10 5,5 Flame class Protection class Temperature Properties Drilling template Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to C (static) Halogen-free, silicone-free See page Fastening-set QUICK-PIN QT Cable inserts KEL-SNAP snap frames KEL-EMC Cable collector Page 47 Page 20 Page

42 QVT Split cable glands Description Type Order Cable Thread PU No. Inserts Thread length QVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. QVT QT M Length: 13 mm 10 The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. Compact and small structure Routing of assembled cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Locknut is part of delivery. Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) grey (similar RAL 7035) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free Metric standard sizes QVT QT QVT QT QVT QT M Length: 13 mm 10 M Length: 13 mm 10 M Length: 13 mm 10 QT Cable inserts KVT-EMC bracket KGM locknut Page 47 Page 113 Page 148 QVT QT M Length: 13 mm 10 42

43 QVT-CLICK Pluggable cable glands Type Order Cable PU Description No. Inserts QVT-CLICK QT 10 QVT-CLICK is a circular split frame for quick and easy installation of cables or complete cable harnesses. The QVT-CLICK can be assembled without tools from the front side of the housing. The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. QVT-CLICK QT 10 The QVT-CLICK Tool for quick and easy mounting. Order No (PU: 1) QVT-CLICK QT 10 Compact and small structure Routing of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Assembly within seconds For wall thickness mm Quick and easy assembly from the front side QVT-CLICK Tool Mounting tool 1 Colour Flame class Protection class Temperature Properties Cut-out dimension Polycarbonate (PC) grey (similar RAL 7035) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 30 C to C (static) Halogen-free, silicone-free Metric standard sizes QT Cable inserts Page 47 43

44 KEL-QTA Cable entry frames Description Type Order No. Order No. Cut-out Cables PU Type A Type B [mm] The KEL-QTA easily routes pre-terminated and standard cables without using tools. 44 pre-terminated mm 142 KEL- QTA DP conventional 16 max. 7 mm 1 max. 12 mm 1 max. 16 mm 10 Quick assemly without tools High packing density by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density Suitable for standard cut-outs 44 Flame class Protection class Temperature Properties Elastomer UL94-V0, self-extinguishing IP54, with correct selection of the cable inserts QT - 40 C to + 90 C (static) Halogen-free, silicone-free 142 KEL- QTA pre-terminated mm 10 Type A: Type B: For wall thickness mm For wall thickness mm QT Cable inserts FP Flanged plates Page 47 Page KEL- QTA B pre-terminated mm 10 44

45 KEL-QTA KEL-QTE Cable entry frames Type Order No. Order No Cut-out Cables PU Description Type A Type B [mm] pre-terminated non-pre-term KEL-QTA ø mm ,5 The KEL-QTA easily routes pre-terminated and standard cables without using tools. KEL-QTA ø mm Quick assemly without tools High packing density by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density KEL-QTE ø mm 1 max. 5.2 mm 10 6,4 2,3 24 6,4 2,3 Flame class Protection class (QTA) Temperature Properties Cut-out dimension Elastomer UL94-V0, self-extinguishing IP54, with correct selection of the cable inserts (QT single) - 40 C to + 90 C (static) Halogen-free, silicone-free Metric standard sizes KEL-QTE ø mm 1 max. 5.2 mm Type A: Type B: For wall thickness mm For wall thickness mm KEL-QTE ø mm 1 max. 5.2 mm 10 6,4 2,3 QT Cable inserts KEL-AD Cap for attachment housing Page 47 Page ,4 2,3 KEL-QTE ø mm 1 max. 5.2 mm

46 KEL-AD Insert for multi-pole bases Description Type Order Fits for PU No KEL-adaptor is designed to be attached to the bases of multi-pole housings (standard industrial connectors) ,4 KEL-AD 16-A KEL-DP 32 Type A KEL-QTA 32 Type A 10 The parts can be equipped with KEL-DP (when using standard cables) or KEL-QTA (when using pre-terminated cables) In addition KEL-QTE can be installed into the KEL-AD 24 type ,4 KEL-AD 24-A KEL-DP 32 Type A KEL-QTA 32 Type A KEL-QTE Fits on all standard attachment housings High flexibility in selection of cable entry Quick assembly and disassembly Flame class Protection class Temperature Properties Polyamide (PA) UL94-V0, self-extinguishing IP54-40 C to C (static) Halogen-free, silicone-free KEL-QTA Cable entries KEL-DP Cable entry frames Page 44 Page

47 QT Inserts Insert QT in combination with QVT-CLICK Type Order No. Clamping range PU Description grey QTB Blind insert 10 QT mm 10 QT QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT mm 10 QT ø 3 mm 10 QT ø 4 mm 10 QT ø 5 mm 10 QT ø 5.5 mm 10 QT-ASI QT ø 6 mm 10 The QT range supports cable diameters from 3 to 15 mm. They are used with the following cable entry frames: KEL-QUICK Page QVT / QVT-CLICK Page KEL-QTA Page Assembly When installing the insert, the smooth side of the insert has to face the middle of the cable entry frame. Flame class Temperature Properties Elastomer UL94-V0, self-extinguishing - 40 C to+ 90 C (static) Halogen-free, silicone-free QT ø 6.5 mm 10 QT ø 7 mm 10 QT ø 3 mm 10 QT ø 4 mm 10 QT ø 4.5 mm 10 QT ø 5 mm 10 QT ø 5.5 mm 10 QT ø 6 mm 10 QT tele KEL-QUICK Cable entries QVT Cable glands KEL-QTA Cable entries Page Page Page QT-ASI ASI-cable 10 QT-ASI ASI-cable 10 QT tele Telephone cable 10 47

48 2Cable entry systems for entering standard cables At a glance Even when entering standard cables icotek offers a wide range of products that offer a lot of advantages in comparison to conventional cable glands. The compact, slim and innovative design of the icotek system offers a professional appearance and in many applications good strain relief. Especially suitable for applications where a lot of cables have to be entered into a small space. Benefits 1. High packing density The cable entry plates KEL-DPZ and KEL-DP offer the opportunity to enter a large amount of cables through a small space. 2. Fast and easy assembly The installation of cables is done by pushing the cables through the thin, pierceable membrane. 3. No new punch out tools needed The KEL-DP range matches exactly the drilling templates, as well as cut outs according to the standard dimensions for multi pole connectors (for example from Harting, Wieland). 4. Tight seal Depending on the product a high sealing rate up to IP68 can be achieved. 5. Flexibility Due to the large variety of designs and sizes available, there s a solution for every application. 6. Customized solutions If you can t find what you need in our standard product offering, custom solutions are available upon request. 48

49 Product group 2 Cable entry systems for entering standard cables Chapter content Cable entry plates KEL-DPZ 24 Cable entry plates KEL-DPZ-B Cable entry plates KEL-DPZ-E Cable entry plates KEL-DPZ-KL Typical applications KEL-DP / -DPZ for non pre-terminated cables Cable entry plates KEL-DPZ round Cable entry plates KEL-DP 24 Cable entry plates KEL-DP-E Cable entry plates KEL-DP round Cable entry inserts KEL-DPF Cable entry inserts KEL-JUMBO flex Cable entry inserts KEL-ULTRA flex Page Page Page Page Page Page Page Page Page Page Page Page tel +49 (0) fax +49 (0)

50 KEL-DPZ 24 Cable entry plates IP65 KEL-DPZ on request also available with threaded bushings.* Membrane on front Description Type Order No. Number of PU cables KEL-DPZ entry plates are designed to route and seal standard cables (from 3.2 mm to 22 mm in diameter) in limited space. KEL-DPZ mm mm 10 Simply push standard cables through the thin membrane and it s immediately sealed (IP65 / IP66) and strain relieved. The size DPZ 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. KEL-DPZ mm 10 The assembly of the KEL-DPZ with cables or pneumatic hoses can be done within seconds. Simply put a small slit in the thin membrane and push the cable through. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. KEL-DPZ mm mm mm mm 10 KEL-DPZ mm mm mm 10 *Except KEL-DPZ-KL / KEL-DPZ round 50

51 KEL-DPZ 24 Cable entry plates Conical shape on back provides additional sealing and strain relief Type Order No. Number of PU Description IP65 cables KEL-DPZ mm mm mm 10 Assembly within seconds High packing density Dual sealing of cables according to IP65 Automatic seal and strain relief for the cable KEL-DPZ mm mm 21x mm 10 Colour Flame class Protection class Temperature Properties Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP65-40 C to + 90 C (static) Halogen-free, silicone-free mm / page KEL-DPZ x mm 10 Plugs FP Flanged plates Page 33 Page KEL-DPZ x mm mm 10 51

52 KEL-DPZ-B Cable entry plates KEL-DPZ on request also available with threaded bushings.* IP66 Description Type Order No. Number of PU cables 72,80 58 The KEL-DPZ-B entry plates are designed for routing standard cables (without connectors). With an area of only mm, up to 25 cables can be easily routed and sealed according to IP ,70 KEL-DPZ-B mm mm mm 10 Simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed ,80 58 KEL-DPZ-B mm mm mm mm 10 5,70 Space saving shape Dual sealing of cables according to IP66 High packing density Assembly within seconds ,80 58 KEL-DPZ-B x mm 10 5,70 Colour Flame class Protection class Temperature Properties Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP66-40 C to + 90 C (static) Halogen-free, silicone-free mm FP Flanged plates Page *Except KEL-DPZ-KL / KEL-DPZ round 52

53 KEL-DPZ-E Cable entry plates Membrane on front Conical shape on back provides additional sealing and strain relief IP66 Description Type Order No. Number of PU cables KEL-DPZ-E mm 10 KEL-DPZ-E is designed for routing standard cables (without connectors). 5,70 With an area of only mm, up to 21 cables can be easily routed and sealed according to IP KEL-DPZ-E x mm 10 Simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. 5,70 ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. Space saving shape Dual sealing of cables according to IP66 High packing density Assembly within seconds Colour Flame class Protection class Temperature Properties Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP66-40 C to + 90 C (static) Halogen-free, silicone-free mm / page

54 KEL-DPZ-KL Cable entry plates IP65 Membrane on front Conical shape on back provides additional sealing and strain relief Description Type Order No. Number of PU cables The cable entry plate KEL-DPZ-KL is designed for routing up to 72 standard cables (without connectors). The KEL-DPZ products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. ST Plugs can be used for sealing pierced membranes if cables are removed. The KEL-DPZ-KL matches on terminal boxes KL from Rittal. Space saving shape Dual sealing of cables according to IP65 High packing density Assembly within seconds 9, , KEL-DPZ-KL x mm 21x mm mm mm 5 4,5 Colour Flame class Protection class Temperature Properties Cut-out dimensions Support: Steel, molded with elastomer Sealing plate: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP65-40 C to + 90 C (static) Halogen-free, silicone-free mm Inserts Page 33 54

55 Typical applications KEL-DP / -DPZ for non pre-terminated cables KEL-DPZ 24 x - Page Routing of numerous cables with varying cable diameter sizes into machine control cabinet. IP65 seal is achieved. Additional membranes are available for future routing. KEL-DPZ 24 x - Page / FP AE Page 125 Routing of cables in AE-enclosure. Use of prefabricated flange plates means easy installation and no expensive custom sheet metal work. KEL-DPZ B25 - Page 52 Entering of cable bundle in a small space with high sealing rate IP66. KEL-DPZ B25 - Page 52 / KEL Page 6 Combination of split and push-through-systems for the routing of cables in an integrated switch cabinet. KEL-DP Page 58 Entering a large number of standard cables through a small space. KEL-DP Page 60 Routing of cables, conduits and pipes with a single cable entry plate. 55

56 KEL-DPZ round Cable entry plates IP68 Membrane on front Conical shape on back provides additional sealing and strain relief Type Order Number of Thread External Exceeds PU No. cables metric diameter DA cut-out KEL-DPZ entry plates are designed to route and seal standard cables (from 3.2 mm to 22 mm in diameter) in limited space. KEL-DPZ mm mm M mm 8.0 mm 10 Simply push standard cables through the thin membrane and it s immediately sealed (IP65 / IP68) and strain relieved. KEL-DPZ mm M mm 8.0 mm 10 The round versions of the KEL-DPZ series have a thread to fit in metric cut-outs from M32 to M63. Thus cut-outs for standard metric cable glands can be used. The assembly of the KEL-DPZ with cables or pneumatic hoses can be done within seconds. Simply put a small slit in the thin membrane and push the cable through. KEL-DPZ mm mm M mm 8.0 mm 10 ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. KEL-DPZ mm mm M mm 8.0 mm 10 KEL-DPZ mm mm mm M mm 8.0 mm 10 KEL-DPZ mm mm M mm 8.0 mm 10 KEL-DPZ mm M mm 8.0 mm 10 56

57 KEL-DPZ round Cable entry plates Type Order Number of Thread External Exceeds PU No. cables metric diameter DA cut-out IP68 KEL-DPZ KEL-DPZ x mm mm mm mm mm mm M mm 8.0 mm 10 M mm 8.0 mm 10 Assembly within seconds High packing density Dual sealing of cables according IP68 Automatic seal and strain relief for the cable Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment KEL-DPZ KEL-DPZ mm mm mm M mm 8.0 mm 10 35x mm M mm 8.0 mm 10 Colour Flame class Protection class Temperature Properties Thread length Cut-out dim. Thread frame: Polyamide (PA) Sealing plate: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP68 (certified according to DIN EN 60529: ) - 40 C to + 90 C (static) Halogen-free, silicone-free 14 mm Metric standard sizes FP Flanged plates MP Module plates Page Page

58 KEL-DP 24 Cable entry plates Fastening Description Type Order No. Order No. Number of PU Type A Type B cables 142 KEL-DP entry plates are designed for routing standard cables (without connectors). The KEL-DP products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fixing rib ensures a centered fit in the cut-outs KEL-DP KEL-DP max mm 10 5 max mm 12 max mm 10 Quick and easy assembly, no tools required High packing density Cost-effective For wall-thickness up to mm KEL-DP max. 6.5 mm 7 max mm 10 Colour Flame class Protection class Temperature Properties Cut-out dimensions Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP64-40 C to + 90 C (static) Halogen-free, silicone-free mm KEL-DP KEL-DP max. 6.5 mm 4 max mm 4 max mm 2 ASI-Leitungen 10 48x max. 6.5 mm 10 Type A: Type B: For wall thickness mm For wall thickness mm FP Flanged plates Page KEL-DP x max. 5.3 mm 9 max. 6.4 mm 8 max. 8.3 mm 10 58

59 KEL-DP-E Cable entry plates Type Order No. Cut-out Number of PU Description [mm] cables 62 KEL-DP-E max. 8.3 mm 2 max. 6.5 mm KEL-DP-E entry plates are designed for routing standard cables (without connectors). KEL-DP-E max. 6.5 mm 1 max mm The KEL-DP-E products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. 102 ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fixing rib ensures a centered fit in the cut-outs. KEL-DP-E max. 8.3 mm 2 max. 6.5 mm KEL-DP-E max. 6.5 mm 1 max mm Quick and easy assembly, no tools required High packing density Cost-effective For wall-thickness up to mm KEL-DP-E KEL-DP-E max. 6.5 mm 11 max. 8.3 mm 1 max mm 16 max. 6.5 mm 4 max. 8.3 mm 1 max mm Colour Flame class Protection class Temperature Properties Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP64-40 C to + 90 C (static) Halogen-free, silicone-free 78 KEL-DP-S Edge radii R2 8 max. 7.5 mm 10 19,50 59

60 KEL-DP round Cable entry plates Fastening IP65 Type Order No. Order No. Number of Cut-out External PU Type A Type B cables diameter DA KEL-DP max. 8.0 mm ø mm 10 KEL-DP entry plates are designed for routing standard cables (without connectors). The KEL-DP products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fixing rib ensures a centered fit in the cut-outs. KEL-DP 25 6 KEL-DP KEL-DP max. 5.2 mm 2 max. 9.4 mm 6 max. 5.2 mm 2 max. 6.4 mm 2 max. 9.4 mm 5 max. 7.0 mm 4 max. 18 mm ø mm 10 ø mm 10 ø mm 10 Quick and easy assembly, no tools required High packing density Cost-effective For wall thickness up to mm KEL-DP KEL-DP max. 7.2 mm 3 max mm 1 max mm 10 max. 9.2 mm 2 max mm ø mm 10 ø mm 10 Colour Flame class Protection class Temperature Properties Cut-out dimensions Type A: Type B: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP65-40 C to + 90 C (static) Halogen-free, silicone-free Metric standard sizes For wall thickness mm For wall thickness mm KEL-DP KEL-DP KEL-DP max. 5.3 mm 5 max. 6.3 mm 3 max. 9.5 mm 4 max mm 5 max. 5.3 mm 5 max. 6.3 mm 4 max. 7.2 mm 2 max. 6.0 mm 2 max. 4.0 mm 16 max. 6.3 mm 4 max. 9.3 mm ø mm 10 ø mm 10 ø mm 10 KEL-AD Cap for attachment housing FP Flanged plates Page 46 Page KEL-DP x max. 5.2 mm ø mm 10 60

61 KEL-DPF Cable entry inserts Type Order No. Thread External Clamping range PU metric dimension IP68 KEL-DPF M mm 3-17 mm 5 The KEL-DPF was developed particulary for routing large or unknown size of service cables into the switch cabinet. Due to the flexibility and unique pyramid shape, cable entry and flexible positioning is much easier compared to using conventional cable glands. KEL-DPF M mm 6-24 mm 5 Cutting of DPF inserts: Cable diameter less 25% The corresponding diameters are marked on the insert KEL-DPF M mm mm 5 Assembly within seconds It is possible to install rigid cables at angles Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment KEL-DPF M mm mm 5 KEL-DPF M mm mm 5 Colour Flame class Protection class Temperature Properties Thread length Cut-out dimensions Thread frame: Polyamide (PA) Pyramid: Elastomer grey (similar RAL 7035) black UL94-V0, self-extinguishing IP68 (certified according to DIN EN 60529: ) - 40 C to + 90 C (static) Halogen-free, silicone-free 14 mm Metric standard sizes MP Module plates Page

62 KEL-JUMBO flex Cable entry inserts Description Type Order No. Clamping PU range The KEL-JUMBO flex is a flexible cable entry system for standard cables with a diameter range from mm ,5 They are ideal for the routing supply cables into the switch cabinets. 88 0,5 9, Cutting of KEL-JUMBO flex inserts: Cable diameter less 5 mm The corresponding diameters are marked on the insert 9 KEL-JUMBO flex mm Assembly within seconds Inserts allow dynamic and flexible movement of rigid cables Small installation dimensions (88 88 mm) 6,9 (4x) ,5 Flame class Protection class Temperature Properties Cut-out dimensions Frame: Polyamide (PA) Inserts: Elastomer UL94-V0, self-extinguishing IP54-40 C to + 90 C (static) Halogen-free, silicone-free Round, ø-cable +20% ,5 9 9,5 KEL-JUMBO flex mm MP Module plates BP Blind plates Page Page ,9 (4x) 62

63 KEL-ULTRA flex Cable entry inserts Type Order No. Sealing range PU IP66 KEL-ULTRA flex 1 incl. Fixing screws KEL-ULTRA flex 2 incl. Fixing screws max. 90 mm cable diameter max. 115 mm cable diameter 1 The product line KEL-ULTRA flex is designed as a cable entry system for power supply cables or any cable or conduit that is difficult to manage. The KEL-ULTRA flex comes in two sizes and is ideal for routing and sealing cables and conduits with a diameter from 25 to 115 mm. Inserting large, thick cables is easier than using standard cable glands due to the high flexibility of the KEL-ULTRA flex elastomer pyramide. After inserting the cable or conduit, the KEL-ULTRA flex is quickly and easily mounted with the metal ring and screws. The metal ring enables a circular fixing and sealing of the insert at the enclosure wall. The metal ring is supplied with each KEL-ULTRA flex. Cutting of inserts: Cable diameter less 20% Assembly within seconds Inserts allow dynamic and flexible movement of rigid cables Protection class IP66 Flame class Protection class Temperature Properties Cut-out dimension Insert: Elastomer Fixing metal ring: Steel, zinc-plated Blind plate: Steel, zinc-plated UL94-V0, self-extinguishing IP66 (when fastened with 8 screws) - 40 C to + 90 C (static) Halogen-free, silicone-free ø-cable +30%, max. ø 140 mm 63 MP Module plates BP Blind plates Page Page

64 3Strain relief systems At a glance By using icotek strain relief systems the user can quicky assemble, organize and provide strain relief for cables. The systems can be used for organizing and securing cables in machines, switch cabinets, enclosures and dynamic cable carriers. Benefits 1. Universal use Because of the many different types of DIN rails and screw type assemblies, icotek offers numerous mounting options. 2. Fast and easy assembly Securing the cables is done quickly and inexpensively with standard cable ties. 3. Secure hold The unique shape of the strain relief securely holds the cable tie and cable. 4. High packing density The strain relief plates are available in several sizes. By multilayer mounting the packing density can be greatly increased. 5. Flexibility Due to the wide variety of sizes and designs, a matching product for each application can be found. 64

65 Product group 3 Strain relief systems Chapter content Strain relief plates KZL - for DIN rails shape H and shape C Strain relief plates SF ZL - for DIN rails shape H Strain relief plates ZL - for screw assembly Strain relief plates ZL-AB with aluminium/brass bushings Strain relief plates ZL 03 o4 05 Distance bushing DH - for multilayer mounting Shield plates ZL SB-EMC KB - cable ties and pliers Page Page Page Page Page Page Page Page tel +49 (0) fax +49 (0)

66 KZL Strain relief plates L1 L Type Order No. Order No. Length Length No. of PU for H-rails for C-rails L1 L2 teeth The strain relief plate KZL range is used for static or dynamic applications for organizing and securing cables on machines, control panels or drag chains. The undercut on the comb-shaped profile provides secure strain relief according to EN Strain relief of the cables is achieved by using cable ties. KZL mm 28.3 mm 3 10 KZL mm 68.0 mm 6 10 Strain relief plates are available for 30 mm DIN rails shape C or 35 mm DIN rails shape H. KZL mm mm 9 10 Simple assembly Cost-effective High packing density Universal usage Flame class Temperature Properties Polyamide (PA) UL94-V0, self-extinguishing - 40 C to C (static) Halogen-free, silicone-free KB Cable ties DIN rails Page 73 Page 91 66

67 SF ZL Strain relief plates L1 L2 11,4 51,7 Type Order No. Length Length No. of PU L1 L2 teeth SF ZL mm 19.5 mm 3 10 The strain relief plate SF ZL range is used for assembly on 35 mm DIN rails shape H. SF ZL mm 43.5 mm 4 10 The SF ZL range can be used for strain relief of cables and conduits. The SF ZL range is based upon the strain relief rail ZL, which is mounted on snap-feet for 35 mm DIN rails shape H. SF ZL mm 43.5 mm 5 10 SF ZL mm 68.0 mm 6 10 Simple assembly Cost-effective High packing density Universal usage SF ZL mm 84.0 mm 7 10 SF ZL mm mm 8 10 Flame class Temperature Properties ZL: Polyamide (PA) SF-foot: Spring steel UL94-V0, self-extinguishing - 40 C to C (static) Halogen-free, silicone-free SF ZL mm mm 9 10 KB Cable ties DIN rails Page 73 Page 91 SF ZL mm mm

68 ZL Strain relief plates L1 L Type Order No. Length Length No. of PU L1 L2 teeth The strain relief plate ZL range is used for static or dynamic applications for organising and securing cables on machines, control panels or drag chains. The undercut on the comb-shaped profile provides secure strain relief according to EN Strain relief of the cables is achieved by using cable ties. ZL mm 19.5 mm 3 10 ZL mm 43.5 mm 4 10 For multilayer installation please use distance bushings, see page 71. ZL mm 43.5 mm 5 10 Simple assembly Cost-effective High packing density Universal usage ZL mm 68.0 mm 6 10 Flame class Temperature Properties Polyamide (PA) UL94-V0, self-extinguishing - 40 C to C (static) Halogen-free, silicone-free ZL mm 84.0 mm 7 10 ZL mm mm 8 10 DH Distance bushings KB Cable ties Page 71 Page 73 ZL mm mm 9 10 ZL mm mm

69 ZL-AB Strain relief plates Inlay bushing Inlay bushings also available in brass. Type Order No. Order No. Order No. Length Length No. of PU for M4 screws for M5 screws for M6 screws L1 L2 teeth ZL 39 AB mm 19.5 mm 3 10 ZL 60 AB mm 43.5 mm 4 10 The strain relief plate ZL-AB range is used for static or dynamic applications for organizing and securing cables on machines, control panels or drag chains. By using aluminum / brass nuts for the screw holes, a better fit of the strain relief plate is achieved even in high vibration environments. ZL 70 AB mm 43.5 mm 5 10 ZL 87 AB mm 68.0 mm 6 10 Simple assembly Cost-effective High packing density Universal usage ZL 103 AB mm 84.0 mm 7 10 L1 L2 10 D ZL 121 AB mm mm 8 10 ZL 140 AB mm mm 9 10 Flame class Temperature Properties ZL: Polyamide Bushing: Aluminium Brass (BR) UL94-V0, self-extinguishing - 40 C to C (static) Halogen-free, silicone-free ZL 180 AB mm mm KB Cable ties Page 73 69

70 ZL Strain relief plates L1 L2 9,3 5,5 8,5 35 Type Order No. Length Length No. of PU L1 L2 teeth Strain relief plates ZL feature different comb widths. Thus providing a multi purpose product for various cable sizes. The undercut on the comb-shaped profile provides secure strain relief according to EN Strain relief of the cables is achieved by using cable ties. ZL mm 50.0 mm ZL mm 74.5 mm ZL mm mm Simple assembly Cost-effective High packing density Universal usage Flame class Temperature Properties Polyamide (PA) UL94-V0, self-extinguishing - 40 C to C (static) Halogen-free, silicone-free DH Distance bushings KB Cable ties Page 71 Page 73 70

71 DH Distance bushings U-washer DIN 125 Distance bushing Type Order No. Fits for Length Diameter PU inner outer DH ZL mm 5.2 mm 7.0 mm 10 Strain relief plates can be mounted in multi layers to achieve an increase of the packing density. DH ZL 32 mm 6.2 mm 12.0 mm 10 Inlay bushings Type DH are used. Increase of packing density Aluminium ZL Strain relief plates Page

72 ZL SB-EMC Shield plate for strain relief plates L1 L2 26 6,50 L1 L2 42,10 6,50 Type Model Order No. Fits for Length Length PU L1 L2 The shielding plates provide earth shielding in addition to strain relief. ZL 39 SB-EMC-1 single-row ZL mm 19.5 mm 10 ZL 39 SB-EMC-2 double-row ZL mm 19.5 mm 10 Affix the corresponding shield plate to ZL strain relief. The shield plate contacts the cable shield with ground. The result is a secure low resistance connection between cable shield and ground. ZL 60 SB-EMC-1 single-row ZL mm 43.5 mm 10 ZL 60 SB-EMC-2 double-row ZL mm 43.5 mm 10 ZL strain relief plates sold separately. ZL 87 SB-EMC-1 single-row ZL mm 68.0 mm 10 Shield plate Stainless steel ZL 87 SB-EMC-2 double-row ZL mm 68.0 mm 10 ZL Strain relief plates Page 68 ZL 103 SB-EMC-1 single-row ZL mm 84.0 mm 10 ZL 103 SB-EMC-2 double-row ZL mm 84.0 mm 10 ZL 121 SB-EMC-1 single-row ZL mm mm 10 ZL 121 SB-EMC-2 double-row ZL mm mm 10 ZL 140 SB-EMC-1 single-row ZL mm mm 10 ZL 140 SB-EMC-2 double-row ZL mm mm 10 72

73 KB Cable ties and pliers L B Type Order No. Length Width Bundling Tensile PU L B range strength KB mm 9 mm 28 mm 350 N 100 KB mm 6 mm 28 mm 350 N 100 KB mm 2.2 mm 15 mm 60 N 100 KB mm 2.5 mm 20 mm 60 N 100 KB mm 2.6 mm 22 mm 80 N 100 KB mm 3.6 mm 25 mm 130 N 100 KB mm 4.5 mm 30 mm 180 N 100 KB mm 4.8 mm 45 mm 220 N 100 KB mm 2.9 mm 50 mm 80 N 100 KB mm 4.8 mm 50 mm 220 N 100 KB mm 4.8 mm 75 mm 220 N 100 KB mm 4.8 mm 100 mm 220 N 100 KB mm 2.5 mm 20 mm 60 N 100 KB mm 3.6 mm 25 mm 130 N 100 KB mm 4.5 mm 30 mm 180 N 100 KB mm 4.8 mm 45 mm 220 N 100 KB mm 4.8 mm 50 mm 220 N 100 KB mm 4.8 mm 75 mm 220 N 100 Cable ties are proven utilities for economical bundling and fixing of cables, looms, tubes, conduits and many other components. Power cable ties KB 28 for special requirements. Bundling range max. 28 mm. Order No KB 28 Flame class Temperature Properties KB natural Flame class Temperature Properties Polyamide 6.6 (PA), natural UL94-V2-40 C to C Oil- and mould-resistant KB black Flame class Temperature Properties Polyamide 12 (PA), black UL94-V2-40 C to C Oil- and mould-resistant Polyamide 6.6 (PA), black UL94-V2-40 C to C UV-resistant, particularly matching for outdoor use KB mm 4.8 mm 100 mm 220 N 100 KBW Processing tool for cable ties 1 73

74 4EMC Innovations At a glance For process measurement and control equipment an increasingly higher level of protection against failure is required. The shielding and the earthing of the shields is very important. The area where the cable shield is connected to the enclosure earth/ ground is a critical point. It is very important that the connection has a low resistance. Benefits 1. Flexible Because of the many different types of DIN rails and screw type assemblies, icotek offers numerous mounting options. 2. Fast and tool free assembly Strip the cable shield - press in - ready. 3. Secure hold Properly sized and used in conjunction with cable ties, provides strain relief in accordance with VDE. 4. Large contact area The SKL shield clamps offer a large contact area to the cable shield (see picture A). In comparison to conventional shield clamps we can achieve a up to 50% higher contact area when using the SKL line. The specified clamping range can be exceeded up to 10%. 5. Greatly reduces high frequency interferences In large frequency fields, the SKL shield clamps provide low resistance. Effective range up to 1,000 MHz below 120 Ohms and 10 KHz to 100 MHz significant below 20 Ohms. A: B: Details can be supplied on request. 74

75 Product group 4 EMC Innovations Chapter content Shield clamps for DIN rail shape H SFZ SKL / SF SKL / SFS SKL EMC ServiceBox Assortment of SKL shield clamps Shield clamps for screw fixing LFZ SKL / LFZ-U SKL / LF SKL Page Page Page Test results Shield clamps for bus bar PFSZ SKL / PFS SKL / PFSZ2 SKL / PFS2 SKL PFZ SKL / PF SKL / Busbar 10 3 Supports for DIN rails and bus bars MF - Supports DIN rails / Bus bar HS / SSK Shield clamps PFKZ SKL / PFK SKL / PFKZ2 SKL / PFK2 SKL Shield clamps, single SKL, single Clamp assembly and design tool Design tool RLFZ - EMC Clamp assembly with strain relief SF RLFZ - EMC Clamp assembly for DIN-rails RLF - EMC Clamp assembly EMC - Terminal clamp STFZ SKL / STFZ2 SKL Variety of supporters Customized supporters Shield clamps SK / SKS Cable assembly KEL-EMC / KVT-EMC / KAFM Stripping tools Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page tel +49 (0) fax +49 (0)

76 SFZ SKL EMC Shield clamps Type Order No. Shield diameter PU The shield clamps SFZ SKL range are used for shielding single cables in combination with strain relief. Simple to use and effective shielding of cables. Cables are secured with a cable tie. Strain relief in accordance with VDE standards is achieved. SFZ SKL mm 10 SFZ SKL mm 10 For assembly on 35 mm DIN rails. SFZ SKL mm 10 Simple and tool-free assembly Vibration-proof, maintenance free Strain relief of the cable with shielding in a single device Optimal contact of the cable shielding Permanent and continous spring pressure on the cable shield, adjustment of spring load not necessary SFZ SKL mm 10 SFZ SKL mm 10 SKL-clamp SF- / SFZ-foot Spring steel, zinc-plated Spring steel SFZ SKL mm 10 Cable ties EMC ServiceBox DIN rail Stripping tool Page 73 Page 79 Page 91 Page 115 SFZ SKL mm 10 76

77 SF SKL EMC Shield clamps SF SKL SF SKL Type Order No. Shield diameter PU SF SKL mm 10 The shield clamps SKL range are used for shielding single cables. SF SKL mm 10 SF SKL mm 10 Simple to use and effective shielding of cables. For assembly on 35 mm DIN rails. SF SKL mm 10 SF SKL mm 10 SF SKL mm 10 SF SKL mm 10 Optimal contact of the cable shield Simple and tool-free assembly Permanent and continous spring pressure on the cable shield - adjustment of the pressure is not necessary Space saving by an optimized arrangement Vibration-proof, maintenance free SKL-clamp SF-foot Spring steel, zinc-plated Spring steel SF SKL mm 10 SF SKL mm 10 EMC ServiceBox DIN rail Stripping tool Page 79 Page 91 Page 115 SF single SNAP-foot single 10 77

78 SFS SKL EMC Shield clamps Type Order No. Shield diameter PU Comparable with type SF SKL, the SFS SKL shield clamps are easily mounted on 35 mm DIN-rails. SFS SKL mm 10 The staggered arrangement of SFS SKL provides optimal space utilization. Suitable for applications when there is a need for mounting cables in close proximity. SFS SKL mm 10 SFS SKL mm 10 High packing density Simple and tool-free assembly Permanent and continous pressure on the cable shield - adjustment of the spring pressure is not necessary Optimal contact of the cable shielding Vibration-proof, maintenance free SFS single SNAP-foot single 10 SKL-clamp SFS-foot Spring steel, zinc-plated Spring steel EMC ServiceBox DIN rail Stripping tool Page 79 Page 91 Page

79 EMC ServiceBox EMC ServiceBox for SKL-EMC shield clamps The suitable EMC clamp is always readily available! The EMC ServiceBox is perfect for installations and service calls. Retrofitting and maintenance can be carried out easily and quickly Order No Content SKL for TS35 - DIN rails: Type SF SKL - sizes: mm Type SFZ SKL - sizes: mm Type SFS SKL - sizes: mm SKL for assembly on subplates: Type LF SKL - sizes: mm Type LFZ SKL - sizes: mm SKL for 10 3 busbar: Type PF SKL - sizes: mm Type PFZ SKL - sizes: mm EMC - : RLFZ - clamp assembly 5 SKL KAFM 4 - Cable collector ZL 60 SB - Shield plate for strain relief plates 7 SKL 11 SKL 6 SKL 11 SKL 15 SKL 12 SKL 4 SKL 1 piece 1 piece 1 piece 79

80 LFZ SKL EMC Shield clamps Type Order No. Shield diameter Fixing hole PU SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and reliable shielding of cables. Cables are secured with a cable tie. Strain relief in accordance with VDE standards is achieved. LFZ SKL mm 4.2 mm 10 LFZ SKL mm 4.2 mm 10 Shield clamps are easily attached to mounting plates via screw. LFZ SKL mm 4.2 mm 10 Integrated strain relief Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous pressure on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free LFZ SKL mm 4.2 mm 10 LFZ SKL mm 4.2 mm 10 SKL-clamp LFZ-foot Cable ties EMC ServiceBox Stripping tool Spring steel, zinc-plated Steel, galvanically zinc-plated Fixing hole 4.2 mm for screw M4 Page 73 Page 79 Page 115 LFZ SKL mm 4.2 mm 10 LFZ SKL mm 4.2 mm 10 80

81 LFZ-U SKL EMC Shield clamps Type Order No. Shield diameter Fixing PU hole LFZ-U SKL for M4 screws: LFZ-U4 SKL mm 4.2 mm 10 SKL shield clamps are used everywhere, where the shielding of single cables must be connected to the ground potential. LFZ-U4 SKL mm 4.2 mm 10 LFZ-U SKL shield clamps enable an easy to use and a reliable shielding of cables. Cables are secured with a cable tie. Strain relief in accordance with VDE standards is achieved. LFZ-U4 SKL mm 4.2 mm 10 LFZ-U4 SKL mm 4.2 mm 10 Shield clamps are easily attached to mounting plates via screw. The shield clamp LFZ-U SKL is available for M4 or M5 screws. During assembly it is sufficient to loosen the existing screw slightly to be able to slide the clamp underneath before re-tightening the screw. LFZ-U SKL for M5 screws: LFZ-U5 SKL mm 5.2 mm 10 LFZ-U5 SKL mm 5.2 mm 10 LFZ-U5 SKL mm 5.2 mm 10 LFZ-U5 SKL mm 5.2 mm 10 Integrated strain relief Optimal contact of the cable shielding Simple and quick assembly Permanent and continous pressure on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free SKL-clamp LFZ-foot Spring steel, zinc-plated Steel, galvanically zinc-plated Fixing hole 4.2 mm / 5.2 mm for screw M4 / M5 Cable ties EMC ServiceBox Stripping tool Page 73 Page 79 Page

82 LF SKL EMC Shield clamps Type Order No. Shield diameter Fixing PU hole LF SKL mm 4.2 mm 10 SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. Shield clamps are easily attached to mounting plates via screw. LF SKL mm 4.2 mm 10 LF SKL mm 4.2 mm 10 Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous spring load on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free High packing density because of an optimized arrangement LF SKL mm 4.2 mm 10 LF SKL mm 4.2 mm 10 SKL-clamp LF-foot Spring steel, zinc-plated Steel, galvanically zinc-plated Fixing hole 4.2 mm for screw M4 LF SKL mm 4.2 mm 10 EMC ServiceBox Stripping tool Page 79 Page 115 LF SKL mm 4.2 mm tel +49 (0) fax +49 (0)

83 EMC Test results LF SKL 8-11 Impedence Z [Ohm] , Frequency [MHz] Leakage absorption [db] o Frequency [MHz] Leakage and Impedence All icotek shield clamps have been tested utilizing various frequency ranges and in all tests there was minimal leakage. icotek EMC clamps are proven to absorb EMC disturbances. Electrical impedence values: - from 10 khz to 100 MHz under 20 Ohm - up to 1,000 MHz under 120 Ohm The unique design of icotek s shield clamps effectively reduce high frequency interferences. SF SKL 6-8 Impedence Z [Ohm] Contact area The SKL shield clamps offer a large contact area to the cable shield (see picture A). In comparison to conventional shield clamps, up to 50% higher contact area is achieved when using the the SKL product line o Frequency [MHz] Leakage absorption [db] o Frequency [MHz] pict. A: SKL-line pict. B: Conventional systems 83

84 PFSZ SKL EMC Shield clamps for bus bar Type Order No. Shield diameter PU Comparable with the PFS SKL range, the shield clamps can be used for shielding single cables. They are used for mounting on 10 3 mm bus bars. PFSZ SKL mm 10 PFSZ SKL mm 10 The PFSZ range provides possibility to fix the cable with a cable tie. Strain relief in accordance with VDE standards is achieved. PFSZ SKL mm 10 PFSZ SKL mm 10 Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free SKL-clamp PFSZ-foot Busbar Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A Busbar 10 3 mm mm 1 Cable ties EMC ServiceBox Busbar Stripping tool Page 73 Page 79 Page 91 Page

85 PFS SKL EMC Shield clamps for bus bar PFS-foot Type Order No. Shield diameter PU PFS single Foot 10 PFS SKL mm 10 SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. The PFS SKL is mounted by snapping on a 10 3 mm bus bar. PFS SKL mm 10 PFS SKL mm 10 PFS SKL mm 10 Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous spring load on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free High packing density because of an optimized arrangement Busbar 10 3 mm mm 1 SKL-clamp PFS-foot Busbar Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page

86 PFSZ2 SKL EMC Shield clamps for bus bar, double Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU Comparable with the PFS2 SKL range, the shield clamps can be used for shielding single cables. They are used for mounting on 10 3 mm bus bars. The PFSZ2 range provides possibility to fix the cables with cable ties. Strain relief in accordance with VDE standards is achieved. PFSZ2 SKL 01 blank mm PFSZ2 SKL 02 blank 3-6 mm PFSZ2 SKL 03 blank 6-8 mm PFSZ2 SKL 04 blank 8-11 mm PFSZ2 SKL mm blank PFSZ2 SKL mm mm PFSZ2 SKL mm 3-6 mm PFSZ2 SKL mm 6-8 mm Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free SKL-clamp PFSZ2-foot Busbar Cable ties EMC ServiceBox Busbar Stripping tool Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A Page 73 Page 79 Page 91 Page 115 PFSZ2 SKL mm 8-11 mm PFSZ2 SKL mm blank PFSZ2 SKL mm mm PFSZ2 SKL mm 3-6 mm PFSZ2 SKL mm 6-8 mm PFSZ2 SKL mm 8-11 mm PFSZ2 SKL mm blank PFSZ2 SKL mm mm PFSZ2 SKL mm 3-6 mm PFSZ2 SKL mm 6-8 mm PFSZ2 SKL mm 8-11 mm PFSZ2 SKL mm blank PFSZ2 SKL mm mm PFSZ2 SKL mm 3-6 mm PFSZ2 SKL mm 6-8 mm

87 PFS2 SKL EMC Shield clamps for bus bar, double Pos. 1 Pos. 2 PFS2-foot Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU PFS2 single Foot PFS2 SKL 01 blank mm PFS2 SKL 02 blank 3-6 mm PFS2 SKL 03 blank 6-8 mm PFS2 SKL 04 blank 8-11 mm SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. The PFS2 SKL is mounted by snapping on a 10 3 mm bus bar. PFS2 SKL mm blank PFS2 SKL mm mm PFS2 SKL mm 3-6 mm PFS2 SKL mm 6-8 mm PFS2 SKL mm 8-11 mm PFS2 SKL mm blank PFS2 SKL mm mm PFS2 SKL mm 3-6 mm PFS2 SKL mm 6-8 mm PFS2 SKL mm 8-11 mm PFS2 SKL mm blank PFS2 SKL mm mm PFS2 SKL mm 3-6 mm PFS2 SKL mm 6-8 mm Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous spring load on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free High packing density because of an optimized arrangement SKL-clamp PFS2-foot Busbar Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A PFS2 SKL mm 8-11 mm PFS2 SKL mm blank PFS2 SKL mm mm EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page 115 PFS2 SKL mm 3-6 mm PFS2 SKL mm 6-8 mm

88 PFZ SKL EMC Shield clamps for bus bar Type Order No. Shield diameter PU Comparable with the PF SKL range, the shield clamps can be used for shielding single cables. They are used for mounting on 10 3 mm bus bars. PFZ SKL mm 10 PFZ SKL mm 10 The PFZ range provides the possibility to affix the cable with a cable tie. Strain relief in accordance with VDE standards is achieved. PFZ SKL mm 10 PFZ SKL mm 10 Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free SKL-clamp PFZ-foot Busbar Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A Busbar 10 3 mm mm 1 Cable ties EMC ServiceBox Busbar Stripping tool Page 73 Page 79 Page 91 Page

89 PF SKL EMC Shield clamps for bus bar Type Order No. Shield diameter PU PF SKL mm 10 PF SKL mm 10 SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. The PF SKL is mounted by Snapping on a 10 3 mm bus bar. PF SKL mm 10 PF SKL mm 10 PF SKL mm 10 Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous spring load on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free High packing density because of an optimized arrangement PF SKL mm 10 PF SKL mm 10 SKL-clamp PF-foot Busbar Spring steel, zinc-plated Spring steel Cu, tin-plated Current load 140 A Busbar 10 3 mm mm 1 EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page

90 L MF Supports for DIN rails and busbars H B Description Type Version Order No. Order No. Dimension PU without Clip with Clip [L B H] There are 4 models of supports for mounting bus bars 10 3 mm or 35 mm DIN rail. Various supports are available to provide solutions for many different conditions. A mounting clip is used for fastening the busbar to supports.. The support has M6 female screw threads to affix the mounting clip of the DIN rail with a M6 screw. Type A MF-A49 Type A mm 10 MF-A68 Type A mm 10 MF-A88 Type A mm 10 Order No Wide variety of supports with different sizes and design Simple assembly of TS-35 DIN rails and 10 3 mm bus bars Support type D provides possibility to affix 2 TS335 DIN rails Steel, galvanically zinc-plated Bus bar Page 91 Mounting clip Order No Type B Type C MF-B20 Type B mm 10 MF-B30 Type B mm 10 MF-B50 Type B mm 10 MF-B90 Type B mm 10 MF-C40 Type C mm 10 Type D MF-C53 Type C mm 10 MF-D49 Type D mm 10 90

91 7,50 1, , , , ,50 1,50 1, , HS / SSK DIN rails / Bus bar Type Perforation Order No. Size Description PU in mm DIN rail mm DIN rail mm non perforated * 40 m mm * 40 m 7, ,20 6,30 DIN-rail shape H, zinc-plated perforated or non perforated fits icotek EMC shield clamps SF SKL, SFS SKL and SFZ SKL. Busbar 10 3 mm, copper tin-plated, fits icotek EMC shield clamps PF SKL, PFZ SKL, PFS SKL, PFS2 SKL, PFSZ SKL and PFSZ2 SKL. DIN rail mm mm * 40 m ,20 6,30 For mounting DIN-rails and busbars various supports are available, see page 90. 7,50 7, * Other length available on request DIN rail mm mm * 40 m ,30 6,30 DIN rail mm non perforated * 20 m 7, DIN rail Bus bar Sheet metal, sendzimir plated Cu, tin-plated Current load 140 A DIN rail mm mm * 20 m ,20 6, KZL Strain relief plates EMC Shield clamps MF Supports for DIN rails and bus bars Page 66 Page 76 pp Page 90 DIN rail mm mm * 20 m 1, , ,20 6, DIN rail mm mm * 20 m ,30 6, Busbar 10 3 mm * 1 m 91

92 PFKZ SKL EMC Shield clamps Secure grip on metal sheets due to mounting claws Type Order No. Shield diameter PU PFKZ SKL - Type A (for wall/sheet thickness mm) Comparable with the PFK SKL range, the shield clamps can be used for shielding single cables. The PFKZ range provides possibility to affix the cable with a cable tie. Strain relief in accordance with VDE standards is achieved. PFKZ SKL clamps are used where a screw connection is either not possible or wanted. The PFKZ SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFKZ-A SKL mm 10 PFKZ-A SKL mm 10 PFKZ-A SKL mm 10 Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free PFKZ-A SKL mm 10 PFKZ SKL - Type B (for wall/sheet thickness mm) PFKZ-B SKL mm 10 SKL-clamp PFKZ-foot Spring steel, zinc-plated Spring steel PFKZ-B SKL mm 10 PFKZ-B SKL mm 10 Type A: Type B: For wall/sheet thickness mm For wall/sheet thickness mm PFKZ-B SKL mm 10 Cable ties EMC ServiceBox Busbar Stripping tool Page 73 Page 79 Page 91 Page

93 PFK SKL EMC Shield clamps PFK-foot Type Order No. Shield diameter PU PFK SKL - Type A (for wall/sheet thickness mm) PFK-A single Foot 10 PFK-A SKL mm 10 PFK-A SKL mm 10 SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. PFK SKL clamps are used where a screw connection is either not possible or wanted. The PFK SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFK-A SKL mm 10 PFK-A SKL mm 10 PFK SKL - Type B (for wall/sheet thickness mm) Optimal contact of the cable shield Simple and tool-free assembly Vibration-proof, maintenance free Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary PFK-B single Foot 10 PFK-B SKL mm 10 SKL-clamp PFK-foot Spring steel, zinc-plated Spring steel PFK-B SKL mm 10 Type A: Type B: For wall/sheet thickness mm For wall/sheet thickness mm PFK-B SKL mm 10 EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page 115 PFK-B SKL mm 10 93

94 PFKZ2-A SKL EMC Shield clamps, double Secure grip on metal sheets due to mounting claws Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU Comparable with the PFK2 SKL range, the shield clamps can be used for shielding single cables. The PFKZ range provides possibility to affix the cable with a cable tie. Strain relief in accordance with VDE standards is achieved. PFKZ2 SKL clamps are used where a screw connection is either not possible or wanted. The PFKZ2 SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFKZ2 SKL - Type A (for wall/sheet thickness mm) PFKZ2-A SKL 01 blank mm PFKZ2-A SKL 02 blank 3-6 mm PFKZ2-A SKL 03 blank 6-8 mm PFKZ2-A SKL 04 blank 8-11 mm PFKZ2-A SKL mm blank PFKZ2-A SKL mm mm PFKZ2-A SKL mm 3-6 mm PFKZ2-A SKL mm 6-8 mm PFKZ2-A SKL mm 8-11 mm Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free Optimal use of space SKL-clamp PFKZ2-foot Type A: Cable ties EMC ServiceBox Busbar Stripping tool Spring steel, zinc-plated Spring steel For wall/sheet thickness mm Page 73 Page 79 Page 91 Page 115 PFKZ2-A SKL mm blank PFKZ2-A SKL mm mm PFKZ2-A SKL mm 3-6 mm PFKZ2-A SKL mm 6-8 mm PFKZ2-A SKL mm 8-11 mm PFKZ2-A SKL mm blank PFKZ2-A SKL mm mm PFKZ2-A SKL mm 3-6 mm PFKZ2-A SKL mm 6-8 mm PFKZ2-A SKL mm 8-11 mm PFKZ2-A SKL mm blank PFKZ2-A SKL mm mm PFKZ2-A SKL mm 3-6 mm PFKZ2-A SKL mm 6-8 mm

95 PFKZ2-B SKL EMC Shield clamps, double Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU PFKZ2 SKL - Type B (for wall/sheet thickness mm) PFKZ2-B SKL 01 blank mm PFKZ2-B SKL 02 blank 3-6 mm PFKZ2-B SKL 03 blank 6-8 mm PFKZ2-B SKL 04 blank 8-11 mm PFKZ2-B SKL mm blank PFKZ2-B SKL mm mm PFKZ2-B SKL mm 3-6 mm Comparable with the PFK2 SKL range, the shield clamps can be used for shielding single cables. The PFKZ range provides possibility to affix the cable with a cable tie. Strain relief in accordance with VDE standards is achieved. PFKZ2 SKL clamps are used where a screw connection is either not possible or wanted. The PFKZ2 SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFKZ2-B SKL mm 6-8 mm PFKZ2-B SKL mm 8-11 mm PFKZ2-B SKL mm blank PFKZ2-B SKL mm mm PFKZ2-B SKL mm 3-6 mm PFKZ2-B SKL mm 6-8 mm PFKZ2-B SKL mm 8-11 mm PFKZ2-B SKL mm blank PFKZ2-B SKL mm mm PFKZ2-B SKL mm 3-6 mm PFKZ2-B SKL mm 6-8 mm PFKZ2-B SKL mm 8-11 mm PFKZ2-B SKL mm blank PFKZ2-B SKL mm mm PFKZ2-B SKL mm 3-6 mm PFKZ2-B SKL mm 6-8 mm Integrated strain relief Optimal contact of the cable shield Simple and tool-free assembly Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Vibration-proof, maintenance free Optimal use of space SKL-clamp PFKZ2-foot Type B: Cable ties EMC ServiceBox Busbar Stripping tool Spring steel, zinc-plated Spring steel For wall/sheet thickness mm Page 73 Page 79 Page 91 Page

96 PFK2-A SKL EMC Shield clamps, double Pos. 1 Pos. 2 PFK2-foot Secure grip on metal sheets due to mounting claws Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. PFK2 SKL clamps are used where a screw connection is either not possible or wanted. The PFK2 SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFK2 SKL - Type A (for wall/sheet thickness mm) PFK2-A single Foot PFK2-A SKL 01 blank mm PFK2-A SKL 02 blank 3-6 mm PFK2-A SKL 03 blank 6-8 mm PFK2-A SKL 04 blank 8-11 mm PFK2-A SKL mm blank PFK2-A SKL mm mm PFK2-A SKL mm 3-6 mm Optimal contact of the cable shield Simple and tool-free assembly Vibration-proof, maintenance free Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Optimal use of space SKL-clamp PFK2-foot Type A: Spring steel, zinc-plated Spring steel For wall/sheet thickness mm PFK2-A SKL mm 6-8 mm PFK2-A SKL mm 8-11 mm PFK2-A SKL mm blank PFK2-A SKL mm mm PFK2-A SKL mm 3-6 mm PFK2-A SKL mm 6-8 mm PFK2-A SKL mm 8-11 mm PFK2-A SKL mm blank PFK2-A SKL mm mm PFK2-A SKL mm 3-6 mm PFK2-A SKL mm 6-8 mm PFK2-A SKL mm 8-11 mm EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page 115 PFK2-A SKL mm blank PFK2-A SKL mm mm PFK2-A SKL mm 3-6 mm PFK2-A SKL mm 6-8 mm

97 PFK2-B SKL EMC Shield clamps, double Pos. 1 Pos. 2 PFK2-foot Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU PFK2 SKL - Type B (for wall/sheet thickness mm) PFK2-B single Foot PFK2-B SKL 01 blank mm PFK2-B SKL 02 blank 3-6 mm PFK2-B SKL 03 blank 6-8 mm PFK2-B SKL 04 blank 8-11 mm PFK2-B SKL mm blank SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and a reliable shielding of cables. PFK2 SKL clamps are used where a screw connection is either not possible or wanted. The PFK2 SKL is simply clamped on the sheet. The claws provide a secure grip, even in case of vibrations. PFK2-B SKL mm mm PFK2-B SKL mm 3-6 mm PFK2-B SKL mm 6-8 mm PFK2-B SKL mm 8-11 mm PFK2-B SKL mm blank PFK2-B SKL mm mm PFK2-B SKL mm 3-6 mm PFK2-B SKL mm 6-8 mm PFK2-B SKL mm 8-11 mm PFK2-B SKL mm blank PFK2-B SKL mm mm PFK2-B SKL mm 3-6 mm PFK2-B SKL mm 6-8 mm PFK2-B SKL mm 8-11 mm Optimal contact of the cable shield Simple and tool-free assembly Vibration-proof, maintenance free Permanent, continous pressure on the cable shield, adjustment of the spring load not necessary Optimal use of space SKL-clamp PFK2-foot Type B: Spring steel, zinc-plated Spring steel For wall/sheet thickness mm PFK2-B SKL mm blank PFK2-B SKL mm mm PFK2-B SKL mm 3-6 mm PFK2-B SKL mm 6-8 mm EMC ServiceBox Busbar Stripping tool Page 79 Page 91 Page

98 SKL EMC Shield clamps, single H B L Type Order No. Clamping range Dimensions Fixing PU [mm] L B H [mm] hole SKL shield clamps can be used for shielding single cables. The shield clamps enable an easy to use and reliable shielding of cables. SKL mm mm 50 SKL mm mm 50 Shield clamps can be easily attached via screw or rivet. SKL mm mm 50 SKL mm mm 50 Optimal contact of the cable shielding Simple and tool-free assembly Permanent and continous spring load on the cable shield - no adjustment of the spring load required Vibration-proof, maintenance free High packing density because of an optimized arrangement SKL mm mm 50 SKL mm mm 50 SKL mm mm 50 SKL mm mm 5 SKL-clamp Spring steel, zinc-plated SKL mm mm Hole spacing: 9.2 mm 5 98

99 Clamp assembly and design tool EMC shield clamp design tool By using the EMC shield design tool (located at you can create an EMC shield clamp configuration specifically for your application. The following drawings are examples for configurations with 7 and 8 shield clamps. Example 1: Clamp assembly 7-piece with SKL mm The design tool enables numerous configurations to be utilized on a single carrier which reduces labor time and material costs. For this purpose use the EMC shield clamp design tool located at You can quickly configure your own "standard" EMC shield clamp. We are willing to give you additional information regarding the extensive possibilities of this application. Our experienced and knowledgeable staff is available to assist you with a solution for your particular application. Example 2: Clamp assembly 8-piece with strain relief and different SKL shield clamps User designed carrier configuration with SKL shield clamps Cost effective even for small quantities Design online at Clamp assembly SKL-clamp Steel, galvanically zinc-plated Spring steel, zinc-plated 99

100 RLFZ EMC Clamp assembly with strain relief Pos. 2 Pos. 1 Type Order No. Number of Length Width PU (unfitted) shield clamps RLFZ (x3) SKL 41.2 mm 44.4 mm 1 The RLFZ range is a further development of the EMC clamp assembly. The combination of EMC shielding and strain relief is the key feature of this system. Thus the specification according the VDE standard is achieved. There are 10 different carriers available, which can be user configured with up to 12 SKL shielding clamps. RLFZ (x4) SKL 56.8 mm 44.4 mm 1 RLFZ (x5) SKL 72.4 mm 44.4 mm 1 The EMC shielding clamps as listed below are available to mount: SKL SKL 3-6 SKL 6-8 SKL 8-11 RLFZ (x6) SKL 88.0 mm 44.4 mm 1 High packing density due to optimized arrangement Possibility to configure custom specific EMC clamp assembly Separate strain relief and EMC-shielding Online design tool for EMC Clamp assembly RLFZ (x7) SKL mm 44.4 mm 1 RLFZ (x8) SKL mm 44.4 mm 1 SKL-clamp RLFZ-foot Spring steel, zinc-plated Steel, galvanically zinc-plated RLFZ (x9) SKL mm 44.4 mm 1 RLFZ (x10) SKL mm 44.4 mm 1 SKL single Cable ties Stripping tool Page 98 Page 73 Page 115 RLFZ (x11) SKL mm 44.4 mm 1 RLFZ (x12) SKL mm 44.4 mm tel +49 (0) fax +49 (0)

101 SF RLFZ EMC Clamp assembly with strain relief Pos. 1 Pos. 2 Type Order No. Number of Length Width PU (unfitted) shield clamps SF RLFZ (x3) SKL 41.2 mm 44.4 mm 1 SF RLFZ (x4) SKL 56.8 mm 44.4 mm 1 SF RLFZ (x5) SKL 72.4 mm 44.4 mm 1 SF RLFZ (x6) SKL 88.0 mm 44.4 mm 1 SF RLFZ (x7) SKL mm 44.4 mm 1 SF RLFZ (x8) SKL mm 44.4 mm 1 SF RLFZ (x9) SKL mm 44.4 mm 1 The SF RLFZ range is based upon the RLFZ clamp assembly, which is mounted on SNAPfeet for 35 mm DIN rails shape H. There are 10 different carriers available, which can be user configured with up to 12 SKL shielding clamps. The EMC shielding clamps as listed below are available to mount: SKL SKL 3-6 SKL 6-8 SKL 8-11 High packing density due to optimized arrangement Possibility to configure custom specific EMC clamp assembly Separate strain relief and EMC-shielding Simple and tool-free assembly SKL-clamp RLFZ-foot Spring steel, zinc-plated Steel, galvanically zinc-plated SF RLFZ (x10) SKL mm 44.4 mm 1 SF RLFZ (x11) SKL mm 44.4 mm 1 SKL single Cable ties DIN rail Stripping tool Page 98 Page 73 Page 91 Page 115 SF RLFZ (x12) SKL mm 44.4 mm 1 101

102 RLF EMC Clamp assembly Pos. 1 Pos. 2 Type Order No. Number of Length Width PU (unfitted) shield clamps RLF (x3) SKL 46.1 mm 25.0 mm 1 Comparable with the RLFZ-range of EMC clamp assembly, just without strain relief. There are 10 different carriers available, which can be user configured with up to 12 SKL shielding clamps. RLF (x4) SKL 61.0 mm 25.0 mm 1 RLF (x5) SKL 72.4 mm 25.0 mm 1 The EMC shielding clamps as listed below are available to mount SKL SKL 3-6 SKL 6-8 SKL 8-11 High packing density due to optimized arrangement Possibility to configure custom specific EMC clamp assembly Online design tool for EMC Clamp assembly SKL-clamp RLF-foot Spring steel, zinc-plated Stainless steel RLF (x6) SKL 88.0 mm 25.0 mm 1 RLF (x7) SKL mm 25.0 mm 1 RLF (x8) SKL mm 25.0 mm 1 RLF (x9) SKL mm 25.0 mm 1 SKL single Stripping tool Page 98 Page 115 RLF (x10) SKL mm 25.0 mm 1 RLF (x11) SKL mm 25.0 mm 1 RLF (x12) SKL mm 25.0 mm tel +49 (0) fax +49 (0)

103 STFZ SKL EMC - Terminal clamp Application STFZ SKL terminal clamp Bosch Rexroth IP20 Inline Module PHOENIX CONTACT All terminals of the INLINE range. The terminals 1.4 and 2.4 must not be used for signal I/O. Pilz GmbH All PSSu-Modules with shield terminals 13 and 23 Siemens All terminals of the ET200s range. Terminals 4 and 8 must not be used for signal I/O. TURCK For terminals of the BL20 I/O system. VIPA SLIO All terminals of the SLIO range. Terminals 4+8 must not be used for signal I/O. WAGO All terminals of the WAGO I/O Systems 750. Terminals 4 and 8 must not be used for signal I/O. The EMC terminal clamps STFZ SKL combines the functions strain relief, cable guidance and shielding of signal cables. Available in two version for 1 or 2 lines. The STFZ2 is used for analog I/O modules using two actuators / sensors. The STFZ SKL EMC terminal clamp is compatible to bus modules listed on the left side. STFZ I/O Insert Tool for quick and easy mounting of STFZ terminal clamps. Order No Further manufacturers upon request. 103

104 STFZ SKL EMC - Terminal clamp, single Type Shield diameter Order No. PU The STFZ SKL EMC terminal clamp provides strain relief, cable guidance, and shielding for decentralized bus-modules (see compatibility table page 103). The EMC shielding clamps as listed below are available to mount: SKL SKL 3-6 SKL 6-8 STFZ SKL mm STFZ SKL mm STFZ SKL mm Shielding of signal cables close to the terminal Strain relief and cable management direct on the bus module STFZ EMC - terminal clamp single SKL-clamp STFZ-foot Cable ties Stripping tool Spring steel, zinc-plated Spring steel Page 73 Page tel +49 (0) fax +49 (0)

105 STFZ2 SKL EMC - Terminal clamp, double Pos. 2 Pos. 1 Type Shield diameter Pos. 1 Shield diameter Pos. 2 Order No. PU STFZ2 Terminal clamp loose STFZ2 01 blank mm STFZ2 2 blank 3-6 mm STFZ2 03 blank 6-8 mm The STFZ EMC terminal clamp provides strain relief, cable guidance and shielding for decentralized bus-modules (see compatibility table page 103). Version for analog I/O modules using two actuators / sensors. STFZ mm blank STFZ mm mm STFZ mm 3-6 mm STFZ mm 6-8 mm The EMC shielding clamps as listed below are available to mount: SKL SKL 3-6 SKL 6-8 Shielding of signal cables close to the terminal Strain relief and cable management direct on the bus module STFZ mm blank STFZ mm mm STFZ mm 3-6 mm STFZ mm 6-8 mm SKL-clamp STFZ-foot Cable ties Stripping tool Spring steel, zinc-plated Spring steel Page 73 Page 115 STFZ mm blank STFZ mm mm STFZ mm 3-6 mm STFZ mm 6-8 mm

106 EMC Customized solutions EMC Customized solutions Aside from our standard product offering, we offer customized solutions for your application - even for small quantities! A wide range of standard clamp assemblies are already available (see pages ). If a standard EMC clamp assembly is not practicable, a custom designed carrier for shield clamps can be supplied. We look forward to sharing our ideas and custom EMC solutions with you. 106

107 EMC Customized solutions Supply of custom designed carriers for SKL shield clamps Cost effective even for small quantities Available for a wide range of cable diameters Carrier SKL-clamp According to specification Spring steel, zinc-plated 107

108 SC SK EMC Shield clamps h b l Description Type Order No. Shield Dimensions PU diameter l b h [mm] Shield clamps can be used where the shield of single cables has to be grounded. Shield clamps can be assembled on a mounting plate with screws, with SC-feet in DIN-rails shape C or with SF-feet on 35 mm DIN-rails shape H. For direct mounting (M4-screw included): SK mm SK mm SK mm SK mm Simple assembly onto TS-35 DIN rails and 10 3 mm busbars Various sizes and possibillities for mounting For 35 mm DIN-rail shape H: SF SK mm SF SK mm SF SK mm SC foot single for C-rail (PU: 10) Order No SF SK mm For 10 3 mm busbar: SK-clamp SF-foot Steel, galvanically zinc-plated Spring steel SS SK mm SS SK mm SS SK mm SS SK mm DIN rail / Busbar 10 3 Stripping tool Page 91 Page 115 For 35 mm DIN-rail shape C: SC SK mm SC SK mm SC SK mm SC SK mm tel +49 (0) fax +49 (0)

109 SKS EMC Shield clamps b l h Type Order No. Shield Dimensions PU Description diameter l b h [mm] SKS mm Shield clamps can be used where the shield of single cables has to be grounded. Shield clamps can be assembled on 10 3 mm busbars. SKS mm SKS mm One SKS shield clamp supports a wide range of cables Simple assembly on 10 3 mm busbars SKS-clamp Steel, galvanically zinc-plated SKS mm Busbar 10 3 Stripping tool Page 91 Page 115 SKS mm SKS mm

110 KEL-EMC-Z Cable assembly with strain relief Pos. 2 Pos. 1 Type Order No. No. of Fastening Fits for PU teeth Cable entry, EMC shield and strain relief - all in one location! KEL-EMC-Z long side KEL-E4 KEL 16 x KEL-ER 16 x KEL-QUICK 16 1 Cables pass through the KEL frame and insert directly to the EMC and strain relief. Simply insert the cable shield into the shield clamp and secure the cable jacket to the strain relief. Two separate functions acc. to regulations - carried out quickly and easiliy! KEL-EMC-Z long side KEL-E5 KEL 24 x KEL-ER 24 x KEL-QUICK 24 1 Custom configurations are available for shield clamps up to 16mm in diameter with minimal order quantities and lead time. KEL-EMC-Z M6 Large surface contact between cable shield and housing/cabinet, especially with conductive coating on treated surfaces Sealing by outer cable jacket - EMC shielding by cable shield (in acc. with regulations) Combined routing and fastening with the KEL Cable entry system Available without SKL shield clamps if only additional strain relief desired Connection of earthing tape or PE conductor M KEL-EMC-Z M5 Steel, zinc-plated 56 M6 KEL Cable entry frames KEL-ER Cable entry frames KEL-QUICK Cable entry frames Cable ties SKL single Stripping tool Page 6-14 Page 6-14 Page Page 73 Page 98 Page M tel +49 (0) fax +49 (0)

111 KEL-EMC-PF Bracket version L1 L2 M ,5 13 M5 Type Fits for Order No. Length Length PU L1 L2 KEL-EMC-PF B4 KEL- E2 KEL- B KEL-ER B mm 58.0 mm 1 The EMC-bracket with the matching PF SKL EMC-shield clamp is perfect in conjuction with the KEL cable entry frame for alleviating interferences due to shields. KEL-EMC-PF 10 KEL-E3 KEL 10 x KEL-ER 10 x mm 83.0 mm 1 The EMC clamp is assembled inside the control cabinet. The same fixing screws for the assembly of the KEL frame on the control cabinet are used for this process. A female screw thread M5 is already integrated in the KEL-EMC-PF bracket. KEL-EMC-PF 16 KEL- E4 KEL 16 x KEL-ER 16 x mm mm 1 Depending on the cable diameter, the corresponding PF SKL EMC shield clamp can be snapped onto the EMC bracket. KEL-EMC-PF 24 KEL- E5 KEL 24 x KEL-ER 24 x mm mm 1 Very high flexibility in terms of cable diameter Large-surface contact of the cable shield Permanent spring pressure on the cable shield Simple assembly Steel, galvanically zinc-plated KEL Cable entry frames KEL-ER Cable entry frames KEL-QUICK Cable entry frames PFSZ SKL Shield clamps PFS SKL Shield clamps PFSZ2 SKL Shield clamps PFS2 SKL Shield clamps PFZ SKL Shield clamps PF SKL Shield clamps Stripping tool Page 6-14 Page 6-14 Page Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page

112 KEL-EMC Cable assembly Type Order No. No. of Fastening Fits for PU teeth Installation of pre-terminated cables without shield interruption. KEL-EMC B long side KEL-E2 KEL-B KEL-ER B KEL-QUICK B2 B4 5 Direct, easy and quick contact to the enclosure Space-saving, up to 10 cables with two-row model Replacement for EMC cable glands, even for pre-terminated cables Low-resistance shield contact Seal via cable jacket - not via shield - higher protection as a result KEL-EMC long side KEL-EMC long side KEL-E3 KEL 10 x KEL-ER 10 x KEL-E4 KEL 16 x KEL-ER 16 x KEL-QUICK Stainless steel KEL Cable entry frames KEL-ER Cable entry frames KEL-QUICK Cable entry frames Cable ties Stripping tool Page 6-14 Page 6-14 Page Page 73 Page 115 KEL-EMC long side KEL-EMC F narrow side KEL-E5 KEL 24 x KEL-ER 24 x KEL-QUICK 24 KEL-B KEL-ER B KEL 10 x KEL-ER 10 x KEL 16 x KEL-ER 16 x KEL 24 x KEL-ER 24 x tel +49 (0) fax +49 (0)

113 KVT-EMC EMC-bracket for cable glands Type Order No. Shield diameter PU KVT-EMC-25 SKL mm 5 KVT-EMC-25 SKL mm 5 KVT-EMC-25 SKL mm 5 KVT-EMC-25 SKL mm 5 The KVT-EMC brackets in combination with the split cable glands KVT and QVT combines routing, EMC shielding and strain relief. The connection to earth/ground is possible over the cabinets wall or earthing tape. Cables pass through the split cable glands and insert directly into the EMC clamps. Separate functions according to regulations - carried out quickly and easily! KVT-EMC-32 SKL mm 5 KVT-EMC-32 SKL mm 5 Simple and tool free assembly Optimal contact of the cable shielding Later assembly possible Additional M5 hole for earthing tape KVT-EMC-32 SKL mm 5 Steel, zinc-plated KVT-EMC-32 SKL mm 5 KVT Split cable glands QVT Split cable glands Page Page

114 KAFM-EMC Cable assembly Type SF: Mounted on SNAP-foot DINrail shape H Type SC: Mounted on screw-foot DINrail shape C Type SK: Mounted on screw-foot DINrail shape H Type DH: Mounted on bushing for flexible fixation on bottomsheet Type Order No. Order No. Order No. Order No. Order No. Length Length No. of Type SF Type SK Type SC Type DH loose rail L1 L2 teeth The cable assembly is practical for earthing interferences on the cable shielding. KAFM KAFM The cable assembly can be assembled on a mounting plate with screws, with SC-feet in DIN-rails shape C or with SF-feet on 35 mm DIN-rails shape H. KAFM KAFM L1 L2 KAFM KAFM ,50 KAFM Stainless steel KAFM KAFM 59 zinc-plated Cable ties DIN rail Stripping tool Page 73 Page 91 Page 115 SF SNAP-foot loose, for 35 mm DIN-rail shape H SK Screw-foot loose, for 35 mm DIN-rail shape H SC Screw-foot loose, for 30 mm DIN-rail shape C Bushing Distance bushing 8 mm high Screw M4 16 DIN 912 Washer Washer ø 4.3 mm DIN

115 EMC Stripping tools Stripping tools Stripping functions Type A: Order No Stripping tool for LV cables Professional heavy duty tool for removing cable jacket to expose cable shield material. Flexible due to exchangeable hooks for covering a wide diameter range Easy to adjust, to use for lengthwise, circular and coil shaped cut Cable diameter mm Thickness of the Isolation up to 4.5 mm Spare blades available with integrated storage compartment in the handle The blade returns into home position automatically, thus the danger of breaking the blade is reduced Good handling because of an optimized ergonimic shape Weight: 116 g Because of the design of the tools hook, cables with diameters up to 40 mm can be removed with only one tool. It is very easy to handle and enables stripping heavy cable jackets under difficult conditions. By turning the body of the tool the blade can be fixed in one of 3 different positions. Thus circular cuts lengthwise can be made to the cable. Type B: Order No Stripping tool for signal, telephone and data cables High precision tool for dismantling signal-, telephone-, AV- and data cables. For removal of the most multi wire cables and fiber optics up to a diameter to 11 mm. Precise setting for the different insulations is easily made by means of the 9-position setting wheel Diameter range mm Thickness of Isolation up to 1.0 mm Spare blades available Weight: 28 g 115

116 5Switch cabinet accessories At a glance icotek cable routing products are designed to keep dirt, debris and liquids outside and away from switch gears and control cabinets. Dust and dirt in switch gears and control cabinets lead to pre-mature and dangerous failures, especially in harsh and contaminated environments. Conventional cable entry systems like foam rubber get brittle over time. Other systems fail by being very limited in the maximum diameter. Benefits 1. Flexible For mounting cable entry systems with pre-terminated and non pre- terminated cables there are several designs of base plates and flange plates available. 2. Fast and easy assembly The base plates are shipped ready for assembly. Threaded holes incorporated in the base plates provide quick and easy installation. 3. Secure hold Strain relief and a tight seal is incorporated in the system. 4. Easy to maintain Due to the split of the systems switch cabinets can be equipped with these system subsequently without having to disconnect the cables. Just build around the running system tel +49 (0) fax +49 (0)

117 Product group 5 Switch cabinet accessories Chapter content Base plate with slide-frame KDR-ESR Split base plates KDR 2 Cable entry frame KDR Flanged plates FP Module plates MP / MP equipped Blind plates BPK / BPK-R / BPM / BPK-SNAP Bulkhead fittings CONFIX FWS Split corrugated conduit and conduit clip WST / SH Cable ties with hook-and-loop fastener KLKB / KLB Holder for hook-and-loop fastener KBH Earthing tapes MB Page Page Page Page Page Page Page Page Page Page Page tel +49 (0) fax +49 (0)

118 KDR-ESR Base plate with slide-frame KDR-ESR Assembly The KDR-ESR is a one-piece base plate to be assembled on cabinet bases. Slide-frames for the KEL cable entry frames are already pre-assembled. After fitting all cables into the KEL frames, they are easily and quickly inserted into the slide frames and latched. During maintenance, the KEL frames are removed without tools from the slide frames.due to the combination KDR-ESR and KEL cable entry frames, a rating of IP54 is achieved (with correct selection of cable inserts). Slideframes which are no longer required, are closed with BPK-SNAP blind plates and notes 1 The base plate is fixed in the cabinet floor. The KEL cable entry frames are fitted. 2 The KEL cable entry frames are screwed together after fitting. Easy assembly and removal During assembly, almost the whole base of the enclosure can be used for installation of cables Even large connectors can be installed easily The base plate KDR 2 is designed for Rittal enclosures TS8. Other sizes can be supplied on request No additional sheet metal work for the user Retrofitting possible without disconnecting cables. All can be built around the cables Flame class Protection class Temperature Properties Base plate: Steel, zinc-plated KDR-ESR Frame: Polyamide (PA) UL94-V0, self-extinguishing IP54, with gasket and correct selection of the cable inserts - 40 C to + 90 C (static) Halogen-free, silicone-free 3 Afterwards the KEL frames are pushed into the slide-frames and latched there. 4 Finally, the middle base plate which is part of the standard cabinet, moves together with the KDR-ESR plates. KEL 16 / 24 Cable entry frames KEL-ER 16 / 24 Cable entry frames KEL-JUMBO 1 Blind plates BPK-SNAP 16 / 24 Page 6 8 Page 7 9 Page 38 Page tel +49 (0) fax +49 (0)

119 KDR-ESR Base plate with slide-frame 43, , Control cabinet Control cabinet Total length Sight size of base No. of possible cable entries Order No. type width base plate plate opening JUMBO 1 JUMBO 2 KEL(-ER) KEL(-ER) mm 458 mm 436 mm TS8 600 mm 458 mm 436 mm mm 458 mm 436 mm mm 658 mm 636 mm TS8 800 mm 658 mm 636 mm mm 658 mm 636 mm mm without division bar 858 mm 836 mm TS mm without division bar 858 mm 836 mm mm without division bar 858 mm 836 mm mm with division bar 420 mm 398 mm TS mm with division bar 420 mm 398 mm mm with division bar 420 mm 398 mm mm* 518 mm 496 mm TS mm* 518 mm 496 mm mm* 518 mm 496 mm * in case both fields of the control cabinet are equipped, 2 complete split base plates are necessary. 119

120 KDR 2 Split base plates KDR 2 Split base plates Split, 2-part base plates KDR 2 with pre-cut holes for KEL / KEL-ER and KEL-JUMBO cable entry systems. Integrated screw holes provide quick and easy installation of KEL frames. and notes During assembly, almost the whole base of the enclosure can be used for installation of cables Even large connectors can be installed easily The base plate KDR 2 is designed for Rittal enclosures TS8. Other sizes can be supplied on request Retrofitting possible without disconnecting of cables. All can be built around the cables. No additional sheet metal work for the user Cut-outs, which are no longer required, are covered with metal blind plates Type BPM When the cable entry frames are assembled, the KDR base plates move together for a tight, secure hold of the cable entry systems. Steel, zinc-plated KEL 24 Cable entry frames KEL-ER 24 Cable entry frames KEL-JUMBO Cable entry frames BPM Blind plates metal Page 6 Page 7 Page 38 Page 133 The frame-parts with inserts have to be built up before final assembly, i.e. before screwing the system together. Screwing of the cable entry frames tightens both parts of the split base plate tel +49 (0) fax +49 (0)

121 KDR 2 Split base plates Control cabinet Control cabinet Total length Sight size of base No. of possible cable entries Order No. type width base plate plate opening JUMBO 1 JUMBO 2 KEL(-ER) TS mm 458 mm 436 mm TS mm 658 mm 636 mm TS mm without division bar 858 mm 836 mm TS mm with division bar 420 mm 398 mm TS mm * 518 mm 496 mm * in case both fields of the control cabinet are equipped, 2 complete split base plates are necessary. 121

122 KDR Cable entry frame KDR Cable entry system The KDR frame system is a perfect system for installation and sealing of pre-terminated cables. The frame system is mounted into the control panel and is sealed by putting the sheet metals together. Subsequent alteration of the number of cables or of the cable diameters is very simple. The KDR frame system is used, where multiple cables are installed, e.g. on cabinets, walls of machine tools, control panels, flexible for bottom-, cover- and side walls. Function Pre-fabricated cables and/ or hoses can be installed through the frame mounted at the bottom of the cabinet. No extra components are necessary for installation of cables. The inserts assembled in the cable entry frames guarantee strain relief of the cables (observe the correct selection of insert according to cable diameter). Perfect transition of KDR frame and frame of the cabinet Installation of pre-terminated cables through the bottom of the control cabinet Suitable for any switch- and control cabinet Aluminium KEL Cable entry frames KEL-ER Cable entry frames Page 6-14 Page tel +49 (0) fax +49 (0)

123 KDR Cable entry frame 9 9 E A E = Installation length for KEL types A = cut-out size Cap Type Order No. Size Length KEL-R mm KDR ordering information KEL-R mm KEL-R mm When ordering KDR cable entry frame, please inform us about: A = cut-out size Example: A = 999 mm equals KDR Total length can be equipped as desired with any types from table on left. KEL-R mm KEL-R mm Included in delivery: 1 KDR - frame by length 2 end pieces KEL-R mm KEL-R mm KEL-R mm KDR 44xxx xxx mm KT - Uni ø 6-40 mm 58 mm Cap mm End piece pieces 123

124 FP Flanged plates Description We supply complete flanged plates FP with cut-outs mm for enclosures of the AE series. The cut-outs, as well as the drilling template, conform to the standard cut-outs for 24-pole industrial connectors. All flanged plates are RAL 7035 powdercoated. Please use the gaskets of the standard plates. Enclosures are supplied with gaskets and screws. We recommend to fasten the cable entry systems with a torque of Nm. No expensive extra sheet metal work is required High packing density is achieved by using KEL, KEL-ER, KEL-DPZ or KEL-DP Reduce labor costs by using cable entry systems KEL, KEL-ER, KEL-DPZ or KEL-DP compared to the assembly of conventional cable glands Steel, powder-coated KEL Cable entry frames KEL-ER Cable entry frames KEL-SNAP Frames KEL-QTA Cable entry frames KEL-DPZ Cable entry plates KEL-DP Cable entry plates Blind plates Page 6-14 Page 6-14 Page 20 Page Page Page 58 Page

125 FP Flanged plates Type Order No. Flanged plates Size Fits for RAL 7035 fit for FP (e.g. for Rittal with RAL 7032 RAL 7035) FP-AE Version with 1 cut-out KEL KEL-DP 24 KEL-QTA 24 1 AE 1032 AE 1035 FP-AE Version with 2 cut-outs KEL 24 FP-AE Version with 2 cut-outs KEL KEL-DP 24 KEL-QTA 24 KEL 16 KEL-ER 16 KEL-SNAP AE 1030 AE 1031 AE 1038 AE 1380 FP-AE Version with 2 cut-outs KEL 24 FP-AE Version with 4 cut-outs KEL KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 KEL-QTA 24 KEL 24 KEL-ER 24 KEL-DPZ 24 KEL-DP 24 KEL-QTA AE 1037 AE 1045 AE 1050 AE 1057 AE 1100 AE 1110 AE 1114 AE 1130 AE 1213 AE 1338 AE 1350 CS CS CS CS TP 6710 TP 6712 TP 6714 TP 6716 FP-AE Version with 4 cut-outs KEL 16 FP-AE Version with 3 cut-outs KEL 24 FP-AE Version with 6 cut-outs KEL KEL 16 KEL-ER 16 KEL-SNAP 16 KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 KEL-QTA 24 KEL 24 KEL-ER 24 KEL-DPZ 24 KEL-DP 24 KEL-QTA AE 1039 AE 1054 AE 1055 AE 1060 AE 1073 AE 1076 AE 1077 AE 1090 AE 1180 AE 1260 AE 1280 AE 1339 AE 1360 AE 1376 AE1958 EL 1919 EL 1926 IN TP 6711 TP TP 6715 TP

126 FP Flanged plates Description Plates for terminal boxes 221 The FP flanged plates type KL, designed to fit the Rittal KL series terminal boxes, are installed in combination with a cable entry system for either pre-terminated or standard cables. FP flanged plates are pre-cut, pre-drilled and painted for easy and quick installation of icotek cable routing products We recommend to fasten the cable entry systems with a torque of Nm. 90 Steel, powder-coated KEL 24/ KEL B Cable entry frames KEL-ER 24/ KEL-ER B Cable entry frames KEL-SNAP Frames KEL-QTA Cable entry frames KEL-DPZ Cable entry plates KEL-DP Cable entry plates Blind plates Page 6 12 Page 7 13 Page 20 Page Page Page 58 Page

127 FP Flanged plates Type Order No. Flanged plates Size Fits for RAL 7035 fit for FP (e.g. for Rittal with RAL 7032 RAL 7035) FP-KL 221x90 10 Version with 1 cut-out KEL KEL 10 KEL-ER 10 KEL-SNAP 10 2 Terminal boxes Type KL FP-KL 221x90 16 Version with 1 cut-out KEL KEL 16 KEL-ER 16 KEL-SNAP 16 2 Terminal boxes Type KL FP-KL 221x90 24 Version with 1 cut-out KEL KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 2 Terminal boxes Type KL FP-KL 221x90 A Version with 3 cut-outs KEL-B KEL-ER B KEL-SNAP B KEL-DPZ-B KEL-DPZ 50 KEL-DP 50 2 Terminal boxes Type KL FP-KL 221x90 B Version with 3 cut-outs KEL-B Use with 2 KEL-SNAP B und 1 KEL-DPZ B 2 Terminal boxes Type KL FP-KL 221x90 C Version with 3 cut-outs KEL-B KEL-B KEL-ER B KEL-DPZ-B 2 Terminal boxes Type KL 127

128 FP Flanged plates Description Plates for bus enclosures 355 The FP flanged plates type BG, designed to fit the Rittal BG series enclosures, have 3 cut-outs that match the dimensions of the standard cut-outs for the 24-pole industrial connectors. These flanged plates are installed in combination with a cable entry system for either pre-terminated cables (KEL-DPZ or KEL-DP) or standard cables (KEL 24 or KEL-ER 24) We recommend to fasten the cable entry systems with a torque of Nm Steel, powder-coated 88 KEL 24/ KEL B Cable entry frames KEL-ER 24/ KEL-ER B Cable entry frames KEL-SNAP Frames KEL-QTA Cable entry frames KEL-DPZ Cable entry plates KEL-DP Cable entry plates Blind plates Page 6 12 Page 7 13 Page 20 Page Page Page 58 Page

129 FP Flanged plates Type Order No. Flanged plates Size Fits for RAL 7035 fit for FP. (e.g. for Rittal with RAL 7032 RAL 7035) FP-BG 355x92 Version with 2 cut-outs KEL KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 - BG FP-BG 555x92 Version with 3 cut-outs KEL KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 6 BG BG IN FP-FL 21 Version with 1 cut-out KEL KEL 24 KEL-ER 24 KEL-SNAP 24 KEL-DPZ 24 KEL-DP 24 - Fibox plates 129

130 MP Module plates Description Type Order No. Fits for The module plates have cutouts for fixing the KEL range cable entry systems KEL 24, KEL-ER 24, KEL-JUMBO, KEL-DPF, KEL-JUMBO flex and KEL- ULTRA flex. The module plates can be fixed on the following positions: Separation plates Closed bottom of the switch box 25 mm breadboard of the switch box 25 mm breadboard bars (Rittal TS System) MP Module plate, blind MP KEL(-ER) 24 x MP KEL(-ER) 24 x The module plate without cutouts Order-No (blind plate) is designed for closing unused cutouts. This module plate can even be used for self-made cutouts. Module plates are supplied with a gasket. MP KEL-JUMBO 1 1 KEL-JUMBO 2 MP KEL-JUMBO 1 Dimension Steel, zinc-plated Aluminium (Order No ) mm KEL 24 Cable entry frames KEL-ER 24 Cable entry frames KEL-SNAP snap frames KEL-JUMBO Cable entry frames KEL-DPF Cable entry inserts KEL-JUMBO flex Cable entry ins. KEL-ULTRA flex Cable entry ins. Blind plates Page 6 Page 7 Page 20 Page 38 Page 61 Page 62 Page 63 Page MP MP MP KEL(-ER) 24 x 1 KEL-JUMBO 1 5 cut-out M50 for KEL-DPF or KEL-DPZ Cut-out 3 KEL-JUMBO flex MP Cut-out 2 KEL-ULTRA flex 130

131 MP Module plate, equipped MP 8 Set MP 6 Set Type Order No. Scope of delivery MP 6 Set MP 8 Set MP 6, mm 5 KEL-DPF 50 1 locking screw M50 MP 8, mm 1 KEL-ULTRA flex 1 BPM-ULTRA KEL / BPM are preassembled in all module plate sets. The module plates can be fixed on the following positions: Separation plates Closed bottom of the switch box 25 mm breadboard of the switch box 25 mm breadboard bars (Rittal TS System) The shipment includes a suitable gasket. Dimension Steel, zinc-plated Aluminium (Order No ) mm 131

132 BPK Blind plates, plastic Type Order No. Blind plate for Dimensions PU KEL cut-out Blind plates close cutouts for standard 10-pole / 16-pole / 24-pole industrial connectors. BPK KEL 10 KEL-ER mm 10 Plastic blind plates are available in two different versions: Type BPK-R: Blind plates for snapping into metal sheet plates up to a thickness of 1.5 mm Type BPK: Blind plates for screw connection BPK-R 16 BPK KEL 16 KEL-ER 16 KEL-QUICK mm mm 10 Fast mounting of the blind plates BP-R range by snapping into the cutout Integrated circular sealing BPK-R 24 BPK KEL 24 KEL-ER 24 KEL-QUICK mm mm 10 Flame class Temperature Properties Polyamide (PA) BPK-R: UL94-V0 BPK: UL94-V2-30 C to C (static) Halogen-free, silicone-free BPK - JFX KEL-JUMBO flex mm tel +49 (0) fax +49 (0)

133 BPM Blind plates, metal Type Order No. Blind plate for Dimensions PU KEL cut-out BPM-B BPM KEL-B KEL-ER B KEL-QUICK B standard 6-pole industrial connectors mm mm 10 Blind plates to close cutouts for standard 6-pole / 10-pole / 16-pole / 24-pole industrial connectors. Blind plates are supplied with a gasket. BPM KEL 10 KEL-ER mm 10 BPM-FG B KEL-FG B mm 10 Steel, zinc-plated Width 2 mm BPM KEL 16 KEL-ER 16 KEL-QUICK mm 10 BPM KEL-24 KEL-ER 24 KEL-QUICK mm 10 BPM KEL-24 xx MT mm 1 BPM-JUMBO flex KEL-JUMBO flex mm 1 BPM-JUMBO KEL-JUMBO mm 1 BPM-JUMBO KEL-JUMBO mm 1 BPM-ULTRA KEL-ULTRA flex 168 mm Width: 1.5 mm 1 133

134 BPK-SNAP Blind plates for KEL-SNAP frames Type Order No. Blind plate Dimensions PU fits with l b h Blind plate BPK-SNAP to close cut-outs of pre-assembled KEL-SNAP frames. BPK-SNAP B KEL-SNAP B mm 10 A snap frame can be closed, e.g. during transport to avoid entry of dust, as long as a KEL frame is not mounted. The BPK-SNAP blind plate is simply snapped on the KEL frame. There is no tool needed to remove it. BPK-SNAP KEL-SNAP mm 10 BPK-SNAP 16 and BPK-SNAP 24 to close cutouts of the KEL-SNAP frames and not used slide-frames of the KDR-ESR base plates. BPK-SNAP KEL-SNAP mm 10 Flame class Temperature Properties Polyethylene (PE) UL94-HB - 40 C to + 80 C (static) Silicone-free BPK-SNAP KEL-SNAP mm 10 KEL-SNAP frames KDR-ESR Base plate with slide-frame Page 20 Page tel +49 (0) fax +49 (0)

135 FWS Bulkhead fittings IP54 CONFIX FWS Assembly The 90 angled conduit fitting CONFIX FWS is for installation of parallel corrugated cable protection conduits, for example in machines, control panels or control cabinets. The liftable cover is tightly fixed by a hinge to the mounting box. The system is therefore very easy to handle. will be offered in the following versions: CONFIX FWS-A with metric internal thread M16 to M50 and CONFIX FWS-B with a grooved conduit clip for types with sizes NW 13, 17, 23, 29, 37 and 50. The available colors are grey (RAL 7011) and black (RAL 9005). Installation of CONFIX FWS is quite easy: 1. Fix FWS with screws 2. Insert conduit with cables 3. Lock FWS with screws 1Fix Fixed cover Fast and easy installation Functional brand new design Protection class IP Insert Lock 135

136 r FWS Bulkhead fittings CONFIX FWS-A Metric internal thread for conduit screwing IP54 Type Internal Thread Hole [mm] Size (A B) [mm] Cut-out (C D) [mm] Drill. Templ. (E F) [mm] Order No. PU Fixed cover Fast and easy installation Functional brand new design Protection class IP54 CONFIX FWS-A 16 M CONFIX FWS-A 20 M Colour Protection class Flame class Temperature Properties Polycarbonate (PC) black (RAL 9005) grey (RAL 7011) IP54 UL94-V0, self-extinguishing -30 C to +100 C (static) Halogen-free, silicone-free CONFIX FWS-A 25 M CONFIX FWS-A 32 M r = E CONFIX FWS-A 40 M r = B D F C A E B D F CONFIX FWS-A 50 M r = Size / Drilling template FWS-A 16 to 25 C A Size / Drilling template FWS-A 32 to

137 r FWS Bulkhead fittings Grooved conduit clip Fixed cover due to hinges Type Dimension* Hole [mm] Size (A B) [mm] Cut-out (C D) [mm] Drill. Templ. (E F) [mm] Order No. PU IP54 CONFIX FWS-B CONFIX FWS-B 11 NW CONFIX FWS-B 16 NW Fixed cover Fast and easy installation Functional brand new design Protection class IP54 CONFIX FWS-B 21 NW CONFIX FWS-B 29 NW r = Colour Protection class Flame class Temperature Properties Polycarbonate (PC) black (RAL 9005) grey (RAL 7011) IP54 UL94-V0, self-extinguishing -30 C to +100 C (static) Halogen-free, silicone-free CONFIX FWS-B 36 NW r = E CONFIX FWS-B48 NW r = B C A E B D F D F Size / Drilling template FWS-B 11 to 21 C A Size / Drilling template FWS-B 29 to 48 * For parallel corrugated cable protection conduit with dimension (NW) 137

138 WST Split corrugated conduit Type Order No. Internal External Fits for Dimensions Ring diameter diameter length* The WST is split and two piece corrugated conduit. Perfect for routing standard or preterminated cables in harsh environments. WST NW mm 13.6 mm KT 13 KTRS mm 50 m* In conjunction with KVT-W90, a high degree of flexibility is achieved. Numerous conduit sizes can be used thanks to the wide variety of split inserts offered (see KT inserts on pages 28-31). WST NW mm 18.5 mm KT mm 50 m* The lengh of the WST split corrugated conduit is individually adjustable. All conduits are available by the metre (0.5 m steps). WST NW mm 25.5 mm KT mm 50 m WST NW mm 31.0 mm KT mm 50 m* Containing pre-terminated cables, warranty of cable remains Retrofitting and maintenance carried out easily and quickly WST NW mm 41.4 mm KTMB-P 37 mm 25 m* Flame class Protection class Temperature Properties Polypropylene, black UL94-V2 IP50-40 C to C Halogen-free, UV-resistant WST NW mm 54.0 mm KTMB-Q 45 mm 25 m* WST NW mm 79.8 mm KTMB-S 70 mm 10 m* SH Conduit clip KVT-W90 Split cable glands Page 139 Page 26 * All conduits are also available by the metre (0.5 m steps) tel +49 (0) fax +49 (0)

139 SH Conduit clip Type Order No. Suitable Fixing Width Height PU SH 45 conduit hole [mm] [mm] SH NW 10 M SH NW 14 M Conduit clips are a one-piece location system to provide secure mounting points for corrugated conduit systems. The clips are secured to their mounting position through a central mounting point with a hexagonal counter-bore. SH NW 20 M SH NW 23 M SH 37 SH NW 37 M SH NW 45 M Flame class Temperature Properties Polyamide (PA), black UL94-V2-40 C bis C Halogen-free, silicone-free Corrugated conduit Page

140 KLKB / KLB Cable ties with hook-and-loop fastener Type Size [mm] Order No. PU L B1 B2 Cable ties with hook-and-loop fastener are a more and more common fixing mode for cables. Cable ties with hook-and-loop fastener are used instead of standard cable ties, because they can be easily closed and opened several times. The soft material is gentle on cables especially where vibrations are present. KLKB bk KLKB bk Cable ties with hook-and-loop fastener are available individually (KLKB) in four different sizes or as a continuous roll (KLB) in four different sizes. KLKB bk B1 Cable ties with hoop-and-loop fastener are re-usable Adaptable The cable tie material is gentle on cables, especially if there are vibrations s Colour Flame class Temperature L Polypropylene + Velour PA black UL94-V2-30 C to + 80 C B2 KLKB bk KLB 10 bk m KLB 15 bk m KLB 20 bk m KBH Holder for hook-and-loop fastener Page 141 KLB 25 bk m tel +49 (0) fax +49 (0)

141 KBH Holder for hook-and-loop fastener ( 4,5) 10, , mm mounting rail Description Type Order No. fits KLKB KLB Fits for PU Holder for hook-and-loop fastener, screwable KBH-S KLKB KLKB KLB 10 KLB mm mounting rail 100 These holders can be used in combination with cable ties with hook-and-loop fastener KLKB and hook-and-loop tape KLB. Large variety of holders provides unique and numerous mounting possibilities. KBH-SB KLKB KLB 10 universal 100 Holder for hook-and-loop fastener, plugable Assembly within seconds Secure hold Flexible usage KBH-R KBH-RBA nc KLKB KLKB KLB 10 KLB 15 KLKB KLB mm mounting rail drill-hole 6.0 mm KBH-S / KBH-R Colour Flame class Temperature Properties Polyamide (PA) black UL94-V0, self-extinguishing - 40 C to C Halogen-free, silicone-free KBH-RBB KLKB KLB 10 drill-hole 6.5 mm 100 KBH-SB / KBH-RBA Colour Flame class Temperature Polyamide (PA) black (KBH-SB) nc (KBH-RBA) UL94-V2-40 C to + 85 C (short-term to 110 C ) KBH-RBB Colour Temperature Polyamide (PA) black - 40 C to C 141 KLKB / KLB Cable ties with hook-and-loop fastener Page 140

142 MB Earthing tapes Type Order No. Length Cross-section Hole size PU L [mm] mm 2 Manufactured with highly flexible E-Cu stranded wires with connecting end pads made of tinned copper strips. The minimum transition and connecting resistance makes them perfectly suitable for use as earthing tapes. Earthing Tapes are available with M6 or M8 connections and in some sizes with both connections combined. MB M M6 1 MB M M6 1 MB M M6 1 MB M M6 1 MB M M6 1 MB M M6 1 MB M M6 1 MB M M8 1 MB M M8 1 MB M M6 1 MB M M8 1 MB M6+M M6 + M8 1 MB M6+M M6 + M8 1 MB M M6 1 MB M M8 1 MB M6+M M6 + M8 1 MB M M6 1 MB M M8 1 MB M M6 1 MB M M6 1 MB M M8 1 MB M M6 1 MB M M8 1 MB M M6 1 MB M M tel +49 (0) fax +49 (0)

143 MB Earthing tapes M8 Connecting end pads (copper) M6 Type Order No. Length Cross-section Hole size PU L [mm] mm 2 MB M6+M M6 + M8 1 MB M M8 1 MB M6+M M6+M8 1 MB M M6 1 MB M M8 1 MB M M6+M8 1 Available in various lengths and crosssections Cost-effective Low transition impedances Cu-ETP with connecting end pads Pads made of tinned copper strips MB M M8 1 MB M M8 1 L MB M M8 1 MB M M8 1 MB M M10 1 MB M M10 1 MB M M8 1 MB M M10 1 MB M M8 1 MB M M10 1 MB M M8 1 MB M M10 1 MB M M10 1 MB M M8 1 MB M M8 1 MB M M

144 i Appendix Technical data and comments At a glance Technical data and drilling templates at a glance. IP rating according to IEC/EN and flammability classification according to UL94. Reference list, abbreviations and index tel +49 (0) fax +49 (0)

145 Appendix Technical data and comments Chapter content Technical data Drilling templates and cut-outs Technical data Locknuts Appendix Certificates Appendix Flammability classification according UL94 Appendix Sealing rates according IEC/EN Appendix General reference notes Appendix Reference list Appendix Abbreviations Appendix Index Appendix Notes Page Page Page Page Page Page Page Page Page Page

146 Technical data Drilling templates B L A C D L L L B2 B1 B2 B1 B1 B1 B2 B1 Type Page Cut-out Drilling template [mm] Cut-out KEL 24 x KEL-ER 24 x KEL-FG A KEL-QUICK 24 KEL-DPZ 24 x type L B1 B2 h l [mm] A KEL-SNAP A max KEL 16 x KEL-ER 16 x KEL-QUICK A KEL-SNAP A max KEL 10 x KEL-ER 10 x KEL-SNAP A KEL 24 x-e 15 B KEL 24 x-mt 16 C KEL 24 x-2mt 17 D L KEL-B KEL-ER B KEL-DPZ-B E 58 72, E B1 KEL-SNAP B KEL-QUICK B E L KEL-FG B 19 E F B1 B2 B1 B2 KEL-E x KEL-FL x F KEL-E2: 58 KEL-E3: 83 KEL-E4: 103 KEL-E5: KEL-E2: KEL-E3: KEL-E4: KEL-E5:

147 Technical data Drilling templates Type Page Cut-out Drilling template [mm] Cut-out type L1 L2 B1 B2 h l [mm] L1 L1 KEL-DPZ-E 53 G G B1 H B1 KEL-JUMBO 1 38 H 56,5-100, ,5 L1 KEL-JUMBO 2 38 I 147,5-100, ,5 I B1 B1 KEL J L1 L2 KEL-JUMBO flex 62 K ,5 J B1 B2 KEL-ULTRA flex 63 L KEL-DPZ-KL 54 M ,50 L1 K B1 L L1 L1 L1 L2 B1 B2 M B1 4,5 147

148 KGM Locknuts Type KGM: Standard nut, plastic Type KGM: SUB-D9, PB, SUB-D25 Type GMT: Split locknut Thread Type Order No. Height Wrench Diagonal Cut-out PU [mm] size [mm] a b [mm] Type KGM: Standard nut, plastic Hexagonal nut with metric threads for attaching components together. M KGM PA 7.0 SW For routing SUB-D, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required. M KGM 25 M KGM PA 7.0 SW PA 7.0 SW M KGM PA 7.0 SW a M KGM PA 8.6 SW M KGM PA 8.6 SW b M GM BR 5.5 SW Type KGM: PB, SUB-D9, SUB-D25 M KGM-SUB-D PC 7.0 SW Colour Flame class Temperature Properties Polyamid (PA) / Polycarbonate (PC) / Brass (BR), nickel-plated grey (similar RAL 7035) black Brass UL94-V0, self-extinguishing - 30 C to C Halogen-free, silicone-free M KGM-PB M KGM-SUB-D25 Type GMT: Split locknut PC 8.0 SW PC 8.0 SW KVT, KVT-SNAP, KVT-W90 Split cable glands QVT Split cable glands KEL-DPZ Cable entry plates KEL-DPF Cable entry inserts Page Page 42 Page Page 61 M GMT PA 9.0 SW M GMT PA 9.0 SW M GMT PA 12.0 SW M GMT PA 15.0 SW tel +49 (0) fax +49 (0)