TECHNICAL DATA SHEET -

Transcription

1 TECHNICL DT SHEET - Universal Vector Pro II Projector mount page 1 of 5 MODELS:,, The Universal Vector Pro II features a sleek, low profile design, a ball and socket design for multidirectional positioning (roll, pitch, and yaw), a structural ceiling plate, complete rmor Lock security, and an extension column connector. Features: UNIVERSL CLMP-STYLE BRCKET VECTOR PRO II Ships fully assembled and attaches to projector adapter plate with a partial rotation and engages into place *30 (±15 ) pitch, 30 (±15 ) roll, 360 yaw Theft-resistant rmor Lock security for complete, integrated security from projector to ceiling Spring loaded captive screw and thumb screw allow for easy projector removal Ceiling plate included with mount 1/4" spacers included with mount allow cords to be routed above ceiling plate, if desired (spacers are optional to use) Threads directly into any ceiling plate that accepts standard 1.9" OD tubing Can be mounted with an extension column (using Extension Column Connector included) Universal clamp-style bracket included with mount. Can be mounted to threaded rod using CC Threaded Rod dapter (sold separately) and Extension Column Connector (included) * Roll & pitch may be limited when flush mounted depending on the dimensions of the specific projector. Maximum Load Capacity: 50 lb (22.7 kg) Dimensions: For product dimensions, see pages 2-5. CUTION: Before installation, identify the location of all vents and ports on the projector to ensure they will not be obstructed by the universal mount. Blocked vents may cause damage to the equipment. ccessories: Fixed and djustable length 1 1/2" NPT Extension Columns ( EXT or DJ models) Black Extension Column Connector with Cord Management (CC 850) Black External Cord Wrap (CC 852 & CC 856) Concrete nchors (CC 205 or CC 203) rmor Lock Plus security cable with Kensington Lock (CC 020) rmor Lock Plus security cable (CC 021) Lightweight Suspended Ceiling Plate (CMJ 455) nti-vibration Ceiling Plates (CC 840 & 845) Side to Side djuster (CC 830) Threaded Rod dapter (CC 810) RCHITECTS SPECIFICTIONS: The Vector Pro II projector mount shall be Peerless Models,, and shall be mounted where indicated on the plans. It shall feature 30 (±15 ) pitch, 30 (±15 ) roll, and 360 yaw. It shall have a 50 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall feature security screws. It shall be constructed of aluminum and nylon finished in black. The main housing is constructed of aluminum. The connector, which locks into the steel adapter plate, is constructed of nylon and is secured to the aluminum ball joint with a 1/4-20 x 1 1/2" long steel bolt. The nylon material can take direct heat up to 250 without any deformation. Its melting point is 500 F. The Vector Pro II is capable of holding up to 50 lb at the maximum 15 roll or pitch. Installation and assembly shall be done in accordance with the instructions provided by the manufacturer W. North ve. Melrose Park, IL ll rights reserved. Peerless is a registered trademark of Vector Pro, rmor Lock, and rmor Lock Plus are trademarks of ll other brand and product names are trademarks or registered trademarks of their respective owners.

2 page 2 of 5 TECHNICL DT SHEET MODELS:,, 1.5 in (38 mm) 1-1/2 X 11.5 NPS 1.5 in (38 mm) 3 in (76 mm) 5.5 in (140 mm) Vector Pro II WITH CORD MNGEMENT CONNECTOR SECTION in (89 mm) 5.00 in (127 mm) 3.00 in (76 mm) 1-1/2 X 11.5 NPS 3215 W. North ve. Melrose Park, IL (CEILING PLTE DETIL) SECTION ll rights reserved. Peerless is a registered trademark of Vector Pro, rmor Lock, and rmor Lock Plus are trademarks of ll other brand and product names are trademarks or registered trademarks of their respective owners.

3 page 3 of 5 TECHNICL DT SHEET MODELS:,, rmor Lock Security Features Ball and socket constructed of aluminum to provide strength Steel bolt reinforces construction Serrated washer head security screw covers larger surface area to deter tampering or prying NOTE: rmor Lock security screws are also included with PP model adapter plates. Brass inserts deter prying and prevent stripping CUT WY VIEW 3215 W. North ve. Melrose Park, IL ll rights reserved. Peerless is a registered trademark of Vector Pro, rmor Lock, and rmor Lock Plus are trademarks of ll other brand and product names are trademarks or registered trademarks of their respective owners.

4 page 4 of 5 TECHNICL DT SHEET MODELS:,, CRTON SHIPPING PRODUCT MODEL# DIMENSIONS WEIGHT WEIGHT x x (311 x 244 x 102) (3.0) (2.7) x x (311 x 244 x 102) (3.4) (3.0) x x (378 x 194 x 197) (3.9) (3.5) ll dimensions shown above as in / (mm). ll weights shown as lb / (kg) in (56 mm) 0.75 in (19 mm) 3.25 in (83 mm) in (60 mm) GENERIC DPTER PLTE (without ceiling plate and adapter plate) 3215 W. North ve. Melrose Park, IL ll rights reserved. Peerless is a registered trademark of Vector Pro, rmor Lock, and rmor Lock Plus are trademarks of ll other brand and product names are trademarks or registered trademarks of their respective owners.

5 page 5 of 5 TECHNICL DT SHEET MODELS:,, 360 (±180 ) YW LC MODEL NUMBER OUTSIDE DIMENSIONS MIN. WIDTH () 8.50 (216) 9.50 (249) (299) MX. WIDTH () (324) (406) (508) MIN. HEIGHT (B) 2.50 (64) (133) MX. HEIGHT (B) 4.75 (121) 6.50 (165) (279) 8.9 in (221 mm) MODEL # MIN / MX C 1.40 / 3.30 (36) (84) 1.30 (33) 3.50 (90) / / (208) LC MODEL NUMBER INSIDE DIMENSIONS MIN. WIDTH (W) 7.50 (191) 8.50 (216) (273) MX. WIDTH (W) (292) (375) (476) MIN. HEIGHT (H) 2.00 (51) 3.25 (83) 5.50 (140) MX. HEIGHT (H) (140) (254) ll above dimensions shown as inch / (mm). 30 (±15 ) ROLL 30 (±15 ) PITCH Vector Pro II universal clamp-style bracket B H W C 5.5 in (140 mm) 3215 W. North ve. Melrose Park, IL SIDE VIEW 2005 ll rights reserved. Peerless is a registered trademark of Vector Pro, rmor Lock, and rmor Lock Plus are trademarks of ll other brand and product names are trademarks or registered trademarks of their respective owners.