Video surveillance camera Installation Guide

Transcription

1 Video surveillance camera Installation Guide TV7026 TV7028 TV7027 TV7029 9

2 1. Preface Dear Customer, Thank you for purchasing this ECOLINE digital surveillance camera. You made the right decision in choosing this state-of-the-art technology. This product complies with the current standards of domestic and European regulations. The CE has been proven and all related certifications are available from the manufacturer upon request. To maintain this status and to guarantee safe operation, it is your obligation to observe these operating instructions! This ECOLINE camera is equipped with a camouflaged motion detector housing and a 1/3 SONY Super HAD interline transfer CCD image sensor. The all state circuitry provides extremely long life and a high level of reliability. These cameras use first class microelements that are resistant to external electromagnetic fields. They offer cutting-edge technology for advanced video surveillance. 10

3 2. Scope of delivery ECOLINE camera in a motion detector housing (model as described) Wall and ceiling mount Installation instructions Fastening screws 3. Features All cameras of the ECOLINE series in motion detector housings have the following functions: a) Auto electronic shutter (AES) b) Auto gain control (AGC) Additional for colour cameras of this series: c) Auto white balance (AWB) d) Digital signal processing (DSP) 4. Precautions To reduce the risk of electric shock, do not remove cover (or back) there are no user serviceable parts inside. Refer servicing to qualified service personnel. Do not expose the camera to rain or moisture or try to operate in wet areas. This camera is designed for indoor use only. If the camera becomes wet, turn the power off immediately and ask a qualified service technician to check it before turning the power on again. Never point the camera towards the sun. Whether the camera is in use or not, never aim the CCD at the sun or other very bright objects (laser 11

4 light). This can damage the CCD element and create white dots on the monitor, a sign that CCD pixels are destroyed. Operate the camera only within the specified temperature, humidity and power ranges. Operating the camera outside the prescribed ranges can lead to reduced product life and early malfunction. Greatly exceeding the specified operating ranges can also result in immediate failure of the camera. All specifications can be found in the technical data. Observe the correct camera model. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. Mount the camera in a shake-free area. The camera could be damaged by improper handling, storage or transport. 12

5 5. Installation instructions This camera is designed for indoor use only. If the camera is used outdoors, damage may occur as a result of dampness and temperatures outside the prescribed range. The ECOLINE colour cameras are equipped with an IR cut and cannot be used in combination with IR illumination. Perfect (colour) video pictures depend a great deal on the illumination. Please take this into account when installing artificial light sources. Light sources with a colour temperature different from daylight may effect colour drifts for colour cameras. The cause of bad picture quality goes hand in hand with improper cabling. Ensure professional installation and avoid passive video distributors. Always select the shortest distance between the camera and the video unit. Before installing a video surveillance system with camouflaged cameras, please be aware of any possible legal regulations that may apply. 13

6 6. Description of the camera (1) Video output connector (VIDEO OUT) BNC output. This connector is for connecting the camera video signal to the VIDEO IN connector of, for example, the monitor (composite signal: 1Vp-p). (2) Power input 14

7 12V DC voltage. Approved for DC voltage are class 2 power supply units only. Ensure the polarity is correct. (6) Microphone output Chinch output. The audio signal of the built-in microphone is received here (composite signal: 2Vp-p). 7. Installation Proceed as follows when installing the camera. 1. Select a suitable place to mount the camera. 2. Connect the video cable (recommended cable type: RG58) to the BNC video out (1) of the camera and to the following connected video unit. The maximum cable length should not exceed 200 m. 3. Connect a 12V DC power supply to the power input of the camera (2). 4. Connect the microphone output (6) of the camera to the audio input of a monitor or similar device. 5. Hold the camera at the location where you want to mount it. Check the orientation and angle of the camera. 6. Fasten the camera housing directly to the desired installation location or use the supplied wall/ceiling mount. 15

8 8. Technical data Model number TV7026 TV7027 TV7028 TV7029 Image sensor 1/3 SONY Super HAD CCD TV lines / pixels 420 / 291, / 438, / 291, / 438,000 Minimum illumination (IRE 30) 0.1 lux (F2.0) 0.2 lux (F2.0) 0.2 lux (F2.0) 0.4 lux (F2.0) Signal-to-noise ratio > 48 db AES 1/50s 1/110,000s Lens 1/3 / 3.7 mm / F2.0 / needle eye lens Horizontal angle 71 Video out 1Vp-p / 75 Ohm / BNC connector Audio output 2Vp-p / 50Ohm / Chinch socket Power source 12V DC Power consumption 1.68W 2.88W Video norm CCIR PAL Dimensions / Weight H: 120 x W: 70 x D: 48 mm / max. 180 g Ambient operating temperature -10 C +50 C Ambient operating humidity max. 90% non-condensed Protection type IP50 16