EN ES FR. Quick Start Guide HGWIP-711. HOMEGUARD MODEL HGWIP-711

Transcription

1 EN ES FR RO HGWIP-711 Quick Start Guide HOMEGUARD MODEL HGWIP-711

2 GIVES YOU PEACE OF MIND WHEREVER YOU ARE HOME Surveillance CHILDREN Playing/Sleeping ELDERLY RELATIVES Safe-guarding PETS Monitoring Welcome Thank you for choosing HOMEGUARD. Getting started is easy. 2 3

3 What s included Parts & Description Sensor Lens Mic Camera Quick Start Guide User Manual Power Adapter LED Light Pan / Tilt Reset Button Speaker MicroSD Power Port Warning Sticker Bracket Fixings Wall Plug 4 5

4 DC 5V Get the App For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for Homeguardcare in the app store. Step 1 Network Connection Connect the AC adapter to your camera and plug it in. Connect the camera to your router via WiFi Configuration Guide. LED status LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator. LED Indicator Network status indicator Blue colour Working status indicator Red colour Blinking quickly Blinking slowly Keep blue (Network status) Keep red (Working status) WiFi configuration successful Connecting to WiFi by One Key Configuration on App 1. WPS configuration: searching for available WPS device 2. WiFi mode: connecting to WiFi signal Beginning upgrade The device works normally but no Internet connection Internet connected The indicator is off WiFi connection failed Device not operational Make sure you are within range of the same Wi-Fi network you'll use for your camera. 6 7

5 Step 2 WiFi Configuration Guide HOMEGUARD IP Camera Part NO.: XXXXXXXX Username: admin Password: DID: VIEW LZVZU DDNS: 005mryg.nwsvr1.com Launch Homeguardcare App, Click Add Camera Select "Add cameras via WiFi Configuration Guide" 3 Select "Please scan the camera s 4 Name the camera and 5 Input correct WiFi password 6 The camera will try to connect 7 If connected, it will go back to QR code" and scan the QR code click Next and click Next WiFi network (the default the Camera page and add the on the bottom of the camera process is 90 seconds) device automatically 8 9

6 OR YOU CAN CHOOSE One Key WiFi Connection You re Done! Congratulations! Your HOMEGUARD Camera is set up and ready to go. You are now free to position your camera anywhere in your home where you get a WiFi signal and view it remotely from anywhere in the world on your Smartphone or Tablet! Please remember to change your password in the Advanced Setting-User Setting. Record your new password here:. Before you begin your IP Camera Set up, please: Have your IP Camera and power adapter ready. Have your ios / android device available to download the Homeguardcare app. Make sure you are within range of the same Wi-Fi network you'll use for your camera. Run the app and add camera by scan the QR code at the bottom of the camera; Then input the user name and password. Click "More", select "Wi-Fi Config", fill in the Wi-Fi password and click "Configuration". Tips: 1. Please put your smartphone near to the router. 2. Input WiFi SSID and password, click config button, then WiFi setup is finished. 3. When WiFi indicator flash slowly (camera will be in this status after powered-on and hold for 5 minutes), it means you can start config WiFi. After config is successful, WiFi indicator will flash fast for a while

7 Live View Tap the monitoring screen, the video menu action bar will appear. Monitoring Options 1. For 2-way Audio, ensure that the speaker is on. To Talk press & hold the Mic button until you ve finished talking, then release. 2. Press Menu to switch between IR LED On/Off & Set or call Preset (for Pan&Tilt camera) Cruise Vertically Cruise Horizontally Menu Flip Mirror Exit Snapshot to phone Record video to phone Audio On/Off Mic On/Off Contrast Brightness Restore to Default Resolution QVGA/VGA/720p Contract IR LED OFF Auto Set or Call Preset Listen Talk 12 13

8 View from Mac or Windows PC Install Homeguardcare software for your Mac or Windows PC from the included CD. Specifications Item Hardware Features Resolution Compression / Max Frame Rate Image Sensor / Lens Pan / Tilt Range Motion Detection Security Protocols Wireless Speed Camera Dimensions Power Input Description Wi-Fi Support Power Interface Reset Button Built-in MicroSD socket Built-in Microphone and speaker 4 infrared LED, 5m Night Vision Range , , H.264/MJPEG, 30fps ¼ CMOS Sensor, f=3.6mm, F=2.0 Viewing Angle: 60 Horizontal 355, Vertical 120 Supported, Will Activate Camera WPA/WPA2,WPA-PSK/WPA2-PSK IEEE802.11b/g/n 150Mbps 79.6mm 79.6mm 110.8mm 5V DC, <6W 14 15