ihelp Phone APP User Guide

Transcription

1 ihelp Phone APP User Guide Outline Programming is included in the cost of the unit. If you choose to make programming changes, be aware that Medi Alarm will have no record of any modifications you make. The ihelp will automatically program via SMS text the commands received from the APP and respond to your smartphone by SMS. When programming, note that the Send the SMS! button changes from blue to orange and you see a number countdown along with the message SMS has been sent. The countdown is to show that you should receive a confirmation text indicating that your command has been sent within the time period of the countdown. To download the phone APP, search ihelp 3G in the APP Store if you have an iphone or use PlayStore if you have an Android phone. After installing, put the icon that looks like this:... on your Main Screen for easy access. Updated 12 September 2017 Table of Contents Setting Up Your APP 2 Account. 3 APN 3 Outgoing Call 3 Incoming Call 4 Fall Detection 4 Geo-Fence. 5 Medicine Reminder.. 5 Track 6 Power Off 6 Time Zone.. 6 SMS Notification 7 More Medi Alarm. All rights reserved. Page 1

2 Setting Up Your APP! Click the circled icon on the APP s main page. You should see this on your screen: 1) Click on this symbol at bottom of screen: + 2) Add the name of the person who will be using the ihelp and the phone number of the ihelp. Then click Completed. 3) Click on the name and number you ve entered (i.e. Bill Jones ). 4) The main screen will now display the ihelp user s name and phone number. Ignore the words Search, Contacts and Clear on the top right of the screens as those are administrative tools only. To delete the Name & Number, press and hold the actual name and phone number of the ihelp user until a window appears that reads: Upon deleting the unit, you will not be able to make settings on the unit. Delete? Click Yes Medi Alarm. All rights reserved. Page 2

3 ! Account - NON-ESSENTIAL - best to skip this one. If the APP user wants to stop other users of their phone from making any programming changes, this is where you would do it. It is highly recommended that you do not use this function to change any of the default settings. The initial keyword and initial password is respectively defaulted as PROG and To change the default settings, enter PROG as the initial keyword, and 1234 as the initial password. Enter your new keyword and new password accordingly. Click Send the SMS! Beware that if you forget the new keyword and/or the new password, the only option for making further programming changes is to clear all data entered into the ihelp and start afresh. However this action still may have no bearing on what was initially programmed by us.! APN - NON-ESSENTIAL - skip this one. Data for this function is automatically set for use throughout Australia. In some countries, it may be necessary to input the APN data depending on the SIM card being used.! Outgoing Call - IMPORTANT and included with initial programming. Click Outgoing Call on the main screen to enter the phone numbers of the emergency contacts. When the grey button is pressed for 2 seconds, the ihelp will sequentially make outgoing calls to the contacts in the order which they are entered here. 1) Click the top NA. 2) The phone number entered can be for a mobile phone, landline or 000. Click Send the SMS! 3) The Ring Time can be set between 10 and 60 seconds. The default (and recommended) time is set for 60 seconds. The means that each contact will have 1 minute to answer their phone. If the contact does not answer their phone within that time, the ihelp will make a call to the next contact. The 60 seconds also has reference to the time in which the contact must press number 3 on their keypad before the ihelp proceeds to make the next call. The 60 seconds starts from the time the contact answers their phone Medi Alarm. All rights reserved. Page 3

4 4) Click Send the SMS! for each contact. To delete an emergency contact, hold the phone number to be deleted until a window appears that reads: SMS will be sent to delete the contact! After programming all the desired contacts, press the back button to return to the main screen.! Incoming Call - NON-ESSENTIAL, not included with initial programming. Click Incoming Call if you want to enable one or both of these functions: 1) Enable auto-answer so that when the ihelp receives an incoming call, the phone number(s) entered, are automatically answered without the user having to press the grey button. 2) To block all but the numbers listed as incoming callers, refer to More > Enable the Allowable Numbers. When this feature is enabled, the ihelp will not allow any phone numbers other than those listed in the incoming call section to call the unit. Note that this option is not listed as an Incoming Call function but is listed in the section titled More. To delete an incoming call number, hold the phone number to be deleted until a window appears that reads: SMS will be sent to delete the contact!! Fall Detection - IMPORTANT and included with initial programming. When the ihelp senses what may have been a fall, the default is that a text and call will go to the emergency contacts as listed in the Outgoing Calls. If this is not the preferred option, then click Fall Detection to disable. Note that Fall Detection can be disabled even when the Call or Message switches are left on Medi Alarm. All rights reserved. Page 4

5 ! Geo-fence - NON-ESSENTIAL, not included with initial programming. This is an advanced setting that requires patience and above average tech savvy skills. Click Geo-fence in the main screen, then click Geo-fence 1. First enter the latitude and longitude of the centre point where you want to create a geofence. Next, choose the radius to be 1-50 kilometres around the designated location. Then, specify whether the alarm is to be triggered whether entering, exiting, or entering and exiting the geo-fence. Click Send the SMS! Repeat for geo-fences 2 and 3. Choose the interval (between minutes) in which notification is to be given when the geo-fence boundary has been crossed. Click Send the SMS! Note that the shorter the interval time, the more battery power is consumed.! Medicine Reminder - OPTIONAL function and included with initial programming. Click Medicine Reminder in the main screen. 1) Click the top NA to... 2) Set the time for being reminded to take medication. Repeat for entering additional times. Click Send the SMS! Note that the voice prompt will sound the reminder message twice in succession. To delete a time setting, hold your finger on the time setting until a window appears that reads: Delete the time for medicine reminder? Then click Yes. Remember that you must also click Send the SMS! when deleting as well. It is not recommended to notify the emergency contacts that it is time for the ihelp user to take medication. Do not click on Report to Service unless the ihelp is being monitored by a professional monitoring service Medi Alarm All rights reserved. Page 5

6 ! Track - Click Track in the main screen to bring up a window that reads: Find Me? By clicking Yes, you will receive a text of the ihelp user s location.! Power-off - Click Power-off in the main screen to bring up a window that reads: Switch off the ihelp? Clicking Yes will turn off the ihelp.! Time Zone - IMPORTANT and included with initial programming. Click Time Zone in the main screen and enter the time zone where the ihelp is being used. For example: In WA, enter GMT ; in QLD, enter GMT+10:00. The letters GMT (Greenwich Mean Time) must always be in capital letters. Once entered, click Send the SMS!! SMS Notification - IMPORTANT and included with initial programming. Click SMS Notification in the main screen, then click the top NA. Enter only mobile phone numbers to receive an SMS notification. The default (and recommended setting) is that an SMS text will be sent in ALL of the following instances: 1) When the grey button is pressed; 2) When Fall Detection is triggered; 3) When going out of OR entering into Geo-fence; 4) Medicine Reminder. The option is to choose one or all of the above. However note that even when ALL is the chosen setting, a text will NOT be sent for Fall Detection or Medicine Reminder unless the sending of a text is enabled in those APP functions. Also, there would be no Geo-fence text sent without Geo-fence settings. If the ihelp user does NOT want a text sent to their emergency contacts when they press the grey button, then we recommend choosing Fall Detection or some other option from the drop down menu Medi Alarm. All rights reserved. Page 6

7 The text received is appropriate for the ihelp function activated. Here are two examples: 1) When the grey button is pressed, the text will read along these lines: I need help!battery:88,maps.google.com/maps?q= , ) When Fall Detection is triggered, the text will read along these lines: Fall Alert! Battery:88,maps.google.com/maps?q= , Enable Technical Response - When enabled, the text will include more detailed information but without descriptive words. The information contained will be all in numbers except for the link at the end. The order of information will be as follows: Event Code - 1 = grey button pressed; 2 - fall alert triggered; 6 - status response; 7 - routine or fixed time report; 8 - Geo-fence activated; 9 - Medicine Reminder. International Mobile Equipment Identity (IMEI) and ihelp Serial Number. The date and time - Year, Month, Date, Cell Signal Strength = excellent; = good; 6-10 = weak; >6 = poor. GPS Accuracy - Using GPS satellites, cell signal triangulation and WiFi, a numeric value in metres will be given which means that the ihelp is within a radius of the specified distance. Battery Power - The percentage given is the battery power remaining. GPS Validity - 1 = Current location; 0 = Last known location. Longitude & Lattitude - Link to Google Maps For example: After enabling Technical Response, and the grey button is pressed, the text might show: 1, , ,13,43,88,1, , ,maps. google.com/maps? Medi Alarm. All rights reserved. Page 7

8 ! More - NON-ESSENTIAL, not included with initial programming. Click More in the main screen for other functions. 1) Enable / Disable SMS - When enabled (the default and recommended option) a confirmation text will be sent to the phone which just sent the text. 2) Enable / Disable the Allowable Numbers - When enabled, only the emergency contacts entered as Incoming Calls will be able to call the ihelp. The default is that this function is off which allows anyone to be able to call the ihelp. 3) Track and Status Request a) Enable Track Requests - This means that anyone is permitted to text the word Track to acquire the ihelp user s remaining battery power and location. The default is that this function is on. b) Enable Status Requests - This means that anyone is permitted to text the word Status to acquire additional technical information as listed on the APP and explained on the previous page as when Technical Response is enabled. 4) Time Announcement - When enabled, the time (only on the hour) will be audibly announced. The default is that time announcement is off. Initial custom programming is built into the cost of the ihelp. If the user wants us to make any programming modifications after having received their ihelp, we will do so for the cost of $10 per two changes. If the user wants us to entirely re-program their ihelp, the cost is $30. Also note that the cost of a confirmation text will be billed by the user s phone service provider for each individual programming change Medi alarm. All rights reserved. Page 8