Everything in your eyes. ismartviewpro. (For Android) User Manual VER 5.2

Transcription

1 IP Cloud Network Camera Everything in your eyes ismartviewpro (For Android) User Manual VER 5.2

2 1. ismartviewpro Summary ismartviewpro for android is our company developed application software based on Android system, it is suitable for android mobile phone and Panel PC, support android and 4.2. ismartviewpro features: Support android 5.0 OS; Support quickly configurate WiFi of the camera via mobile phone sound wave; Support SmartP2P plug and play device ; Support multi window view (Max.4 window; Support to playback SD card recording via mobile phone; Support functions for controlling video, setting video parameters, monitoring, talking, controlling PTZ and snapshot; Support to search camera in LAN and add it; Support to edit and manage the camera (WiFi/ /Alarming/FTP function etc). Camera indicating light The X series is equipped with two status indicators, red is the working status indicator, blue is the WIFI status indicator, but some waterproof machines are not exposed. Red status indicator: 1) when the power is switched on, if the power supply is normal, the red indicator light is on 2) after the boot, if the system is normal start, the red indicator light slow flashing 3) if the device is connected to the Internet, the red indicator is always on 4) long press the reset button, red indicator light flash, indicating the recovery factory default value is successful; firmware upgrade process, red indicator light flash Blue status indicator light: 1) after the boot, the blue light flashes, indicating that WIFI can be configured 2) the blue light flashes, indicating that the wireless router is being connected 3) the blue indicator is always light, indicating that the connection has been established with the wireless router 4) indicating that the light is off, indicating that no WIFI operation is used 2. Obtain the Software Obtain ismartviewpro form attached CD. Search and download ismartviewpro from Google Play Store. Scan QR code to download it by mobile phone Scan it to download ismartviewpro 3. Installing the software Download ismartviewpro software to mobile phone and install it. It shows the following icon after finishing installation:

3 ismartviewpro Tips: Please be sure that you have finished network configuration of the camera according to user manual, and can visit the camera via LAN or WAN before using ismartviewpro software. 4. Application interface introduction 4.1 Introducing Interface Camera: can view camera list and setting some functions of the camera; Alarm: can check alarm event of the camera; Pictures: can view the snapshot of the mobile phone at viewing video; Videos: can view recording file in mobile phone, and in storage card of remote camera when you view video; More: Mobile Phone sound wave configure Wi-Fi and check related APP version number.

4 4.2 Sharing Pictures Click the Pictures button to access local picture file-->>select the camera you want to view-->>select the picture you want to view-->>touch and hold the picture needed to share -->>Click Share button to share the selected picture. 5. Add the Camera 1 Launch the ismartviewpro software; 2 Add new camera;

5 There are three way to add device, that is add manually, scan ID to add and search in LAN to add and via WIFI configuration guide to Add. new camera to Add as below. a) Search in LAN to Add b) Scan ID to Add c) Manually to Add d)via WIFI configuration guide to Add Search in LAN to Add Scan ID to Add Manually to Add

6 via WIFI configuration guide to Add 6. Configrate Wi-Fi via smartphone sound wave 6.1 Login APP, enter into More, select One Key WiFi Configuration, App will automatically identify the status of the connection wifi, select the wifi to be configured to fill out the Wi-Fi SSID and password, click on the "configuration". Tips: Before configuration, please plug out power, then restart camera, you can configure camera after 5 minutes(the blue WiFi indicator is in the status of slowly flash), otherwise the camera can t be configured, it needs to plug out power again; Put smartphone loudspeaker nearby camera microphone, then click configure ( please confirm the camera is with built-in microphone, otherwise the configuration will be failed) After configuration successfully, the blue WiFi indicator will be fast flash,then connect router automatically, meanwhile the blue indicator will be ON all the time.if configuration is failed,you can click Configure button for more times. For KC series devices, the voice monitor is abnormal during the flashing of the blue indicator (5 minutes after the switch starts, and the sound returns to normal). If the WIFI information is configured, the blue light will not flicker after the switch is turned on and the sound will be normal.

7 6.2 smartlink configuration Note: 1. The configuration guide only can configure one device every time. It will point out the DID before configuration. 2. The device firmware version only support 2.4GHz network connection. Steps: Launch the Wansview app, Click to access Add Camera page, then select Add cameras via WiFi configuration guide Scan the QR code on the back of the camera, and name the camera. Then Next

8 On the WiFi network page, the APP detects the phone WiFi connection status automatically and promt. Click WiFi Setting to set WiFi when your phone s WiFi is close. connection status automatically and displays WiFi SSID to the input column. At this time the APP detects the phone WiFi Input correct WiFi password and Next, then the camera will try to connect (the default process is 90Seconds,

9 Send 4 Times Sound Configuration ), if connected, Add success appears, and it will go back to the Camera page, and shows online. If it fails to connect, please tap try again.

10 7. View Video and relative operation 7.1. View video at single screen a) Select the camera added successfully and online; b) Click on monitoring screen, it shows video operation bar, you can control PTZ, snapshot, record, monitor and talk etc. Preset Quit, Preset, Mirror, Flip, PTZ cruise vertically, PTZ cruise horizontally OFF/ON On or Off landscape screen, On or Off monitoring/talk, monitor/talk Tips: Must to click on OFF/ON to launch monitor/talk function when using monitor or talk. Snapshot, record, resolution setting, brightness, contrast, restore default parameters.

11 c) Other setting Click on Preset to access preset setting menu, you can set and recall preset of the camera with PTZ. Click on VGA to access resolution setting menu, can change video resolution of the camera View video at multi-screen Click Multi-screen Button,access to Multi-screen mode. (NVR do not support Multi-View temporarily.) a) b) Click Hide device list, and then click Exit from Multi-Screen Mode.

12 c) Access to NVR Viewing interface 8. Playback SD card recording remotely Click the main menu "Record", enter into "remote" and view the recording file you want. 9. Advanced Setting 9.1. Wi-Fi Setting Click on Wifi Setting to access it, it can search available wifi SSID automatically.

13 9.2. User Setting Click on User Setting to access it, you can set username and password of the camera Alarm Setting Click on Alarm Setting to access it, you can set Motion Detect Armed, Alarm input Armed, IO Linkage on Alarm and Alarmed Mail Notification.

14 9.4. Time Setting Click on Time Setting to access it, you can calibrate local timezone of the camera, then it will work at correct timezone Mail Setting Click on Mail Setting to access it, you need to setup the parameters of sender and receiver at here when you use the function.

15 9.6. FTP Setting Click on FTP Setting to access it, you need to setup user parameters of FTP server at here when you use the function SD Setting Click on SD Setting, you can get storage information of the camera at here.

16 9.8. OSD Setting Enter OSD, turn on Overlay Time and save, then the current time will be show on the Live video. Turn on Overlay name and Save, then the camera's device name will be show on the Live video. (Note: the Overlay Time and Overlay Name can only be set on P2P firmeware version or above version)