Business Function Guide

Transcription

1 Business Function Guide Using Global Passport CDMA For Overseas Use without Anxiety The overseas network condition is available on the au homepage. Make sure to check the condition before leaving Japan. When Your IS06 is Stolen or Lost If your IS06 is lost or stolen while overseas, please contact an au shop or Customer Service Center immediately to suspend phone service. Be aware that any calling charges or packet communication charges incurred after theft or loss of a phone are the responsibility of the customer. If the au IC card inserted into your IS06 is stolen or lost, the card may be inserted into another cell phone (including cell phones for overseas use) by a third party. So, it is recommended to change the UIM PIN code and to lock the UIM card to protect from improper use by a third party. Using Your IS06 Properly by Knowing About Calling and Communication Services Overseas Calling charges differ depending on the calling country and region. Discount services and packet communications flat rate or discount services do not apply to calling charges and packet communications charges incurred while overseas. Calling charges are also incurred when receiving calls overseas. Depending on the country and region, calling charges may be incurred from the time you tap (Call). is displayed on the status bar while roaming. Software update is unavailable while roaming. Configuring the Overseas Settings To use your IS06 overseas, you are required to change to the telecommunications carrier's networks that you connect to at your travel destination. Obtain the latest PRL (Preferred Roaming List) before traveling. ❶

2 Obtaining the PRL networks] [Roaming settings] [PRL settings] [Update PRL version] The PRL (Preferred Roaming List) contains information on roaming areas of overseas partner providers who have signed an international roaming contract with KDDI (au). Be aware that service may be unavailable in some areas if you use old PRL data. Download the PRL data by following the on-screen instructions. When you download the PRL data, packet communication charges apply. Setting the Area networks] [Roaming settings] [Area Settings] [Roaming] [OK] You can set the area where you use your IS06 when you arrive at destination. The country selection screen may be displayed if [Area Settings] is set to [Roaming]. Select the travel country. Setting Data Roaming Configure this setting to use packet communication at destination (while roaming). networks] (Check) to [Data roaming] [OK] Set [Area Settings] to [Roaming] beforehand to enable data roaming. Making a Call at Your Travel Destination Making a Call to Another Country (Including Japan) from Your Travel Destination Enter the international access code of your travel destination* 1 Enter the recipient country code Enter the recipient area code and phone number* 2 (Call) *1: Long-touch 0 to enter + and the international access code of your travel destination is automatically added when calling. *2: If the area code starts with 0, dial it without including the 0. However, include the 0 in some countries or regions such as Italy. If the person you are calling is using Global Passport, enter the country code 81 (Japan) regardless of his/ her travel destination. ❷

3 Making a Call within the Same Country While Overseas Enter the recipient area code and phone number (Call) [Exception 1] U.S. Mainland, Hawaii, Saipan 1 Enter the recipient area code and phone number (Call) [Exception 2] Mexico local calls Enter the recipient phone number (Call) [Exception 3] Mexico long distance calls 01 Enter the recipient area code and phone number (Call) Receiving a Call at Your Travel Destination Drag to the right when receiving an incoming call You can receive calls with the same method as when receiving calls in Japan. If you receive a call while overseas, the call is forwarded from Japan no matter where the call is made from. Call charges to Japan are incurred by the caller and receiving charges by the receiver (IS06). Having Calls Made to Your Travel Destination from Japan Your phone number Call button People calling you can use the same method as when you are in Japan. Having Call Made to Your Travel Destination from Countries Other Than Japan International access code of the caller s country 81 (country code for Japan) Your phone number without the first 0 Call button International access code of the caller s country differs in each country depending on the cell phone company. Talk Time and Standby Time Note that talk time and standby time differ from when the IS06 is used in Japan. Japan Approx. 300 minutes Talk time Overseas Approx. 360 minutes U.S. Mainland, Mexico, Saipan, China Mainland, Hawaii, Korea, Taiwan, Indonesia, Israel, India, Vietnam, New Zealand, Thailand, Macao, Jamaica, Peru, Bangladesh, Bermuda, The Bahamas, Venezuela, and Hong Kong. ❸

4 Standby time Japan Approx. 200 hours Overseas Approx. 300 hours U.S. Mainland, Mexico, Saipan, China Mainland Approx. 320 hours Approx. 380 hours Hawaii, Korea, Taiwan, Indonesia, Israel, India, Vietnam, Bangladesh, The Bahamas, and Hong Kong. New Zealand, Thailand, Macao, Jamaica, Peru, Bermuda, and Venezuela. Talk time and standby time may be reduced to the half of less depending on the signal strength, function settings, and the operating environment, including charge status and temperature. Countries are indicated as of March Switching Input Language Long-touch the character input field [Input method] [Android keyboard] / [iwnn IME] / [DioPen KOR/CHN IME] To display [DioPen KOR/CHN IME], put (check) to [DioPen KOR/CHN IME] in [menu] [Settings] [System] [Language & keyboard]. It is not checked at time of purchase. DioPen KOR/CHN IME detailed settings are configured in [Language & keyboard] [DioPen KOR/CHN IME]. DioPen KOR/CHN IME can be erased in [menu] [Settings] [System] [Applications] [Manage applications], but it will be automatically reinstalled when the IS06 is restarted. Notes about Bluetooth / Wireless LAN (Wi-Fi ) The Bluetooth function and wireless LAN function of au phones comply with Japan domestic and FCC regulations and have acquired authorizations. The Bluetooth and wireless LAN functions may not be fully available in some countries and regions. When using your IS06 overseas, make sure to get informed of the local regulations regarding the use of these functions. ❹

5 FCC notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help and for additional suggestions. Warning The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. FCC RF exposure information This model phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The SAR value for this model handset when tested for use at the ear is W/kg and when worn on the body, as described in this user guide, is W/kg. Body-worn operation This phone was tested for typical body-worn operations with the back of the phone kept at a distance of 1 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1 cm separation distance between your body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of after searching on FCC ID JYCCDMAPTI06. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) website at Do not remove the FCC ID sticker attached to the IS06. The FCC ID sticker can be seen on the top right of the IS06 after the battery pack cover has been removed. April 2011 Edition Sales: KDDI CORPORATION OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: Pantech Co., Ltd. ❺