Additional Help & Info

Transcription

1 USER MANUAL

2 Additional Help & Info If you need additional help or information, please go to REM-Fit.com for tips, info, support & tutorials. Register your product at REM-Fit.com/register ZEEQ is a registered trademark of JAB Distributors LLC DBA REM-Fit

3 Table of Contents Welcome Page 2 ZEEQ Remote 3 ZEEQ Functions 4-5 ZEEQ Lights 6-7 ZEEQ Music 8 5-Click Sleep 9 ZEEQ Auto Sleep 10 FAQ s 11 Specifications 12 Care & Maintenance 13 Health & Safety 14 Testing Information 15-16

4 Welcome to ZEEQ This guide will explain the functions of your new ZEEQ. A complete tutorial can be found in the ZEEQ app. Get the ZEEQ app at REM-Fit.com/apps The ZEEQ app will walk you through setup of your new ZEEQ. Please continue setup in the ZEEQ app. 2

5 ZEEQ Remote Micro-USB Charging Port Power Button LED Lights Reset Lights Volume Up (Press 2x Skip Track) Volume Down (Press 2x Previous Track) 3

6 ZEEQ Functions Power Press and hold for 5 seconds to cycle on/off LED will be green in Wake mode LED will be blue in Sleep mode. *LED will dim after 5 seconds 4

7 ZEEQ Functions Click 1x for volume up Click 2x for skip track Click 1x for volume down Click 2x for previous track RESET Use a pin to press the button and reboot ZEEQ 5

8 ZEEQ Lights Battery Status: ZEEQ will blink white when powered on to indicate it s battery status 0% - 25% 25% - 50% 50% - 75% 75% - 100% Access Denied: ZEEQ will blink red and white repeatedly if you attempt to enter sleep mode while charging Charging ZEEQ while sleeping is NOT supported 6

9 ZEEQ Lights Charging Status: or ZEEQ will blink red while charging. ZEEQ will be solid white when fully charged. Low Battery: When ZEEQ is low on power, it will blink red three times every few minutes. Please charge ZEEQ when you see this. 7

10 ZEEQ Music Speaker Mode: To enable speaker mode press the power button three times in two seconds. LED 2 will turn blue for a moment. *The ZEEQ app will automatically turn the speakers on/off in sleep mode. Speaker Status: To see if the ZEEQ speakers are on, you can press and hold the and buttons at the same time for 2 seconds. If the speakers are on, LED 2 will blink blue for a moment. *Speaker mode can be enabled for 2 hours at a time. 8

11 5-Click Sleep You can use the ZEEQ Remote to start and stop sleep. You must first configure 5-Click in the ZEEQ app. 1. Enable 5-Click in the ZEEQ app. 2. Set your default alarm and setting in the ZEEQ app. 3. Save your settings. *This must be done near your ZEEQ To start and stop sleep from your remote simply press the button on the remote 5 times. The light on the remote will go from green to blue when entering sleep mode. When waking up, the light will return to green. 9

12 ZEEQ Auto Sleep When Auto Sleep is enabled, ZEEQ can automatically enter sleep mode when it detects you have come to bed. 1. Enable Auto Sleep in the ZEEQ app. 2. Set a Start Time. This is the time ZEEQ will begin Auto Sleep detection. 3. Set the Auto Sleep duration window. This is how long after the Start Time ZEEQ will detect Auto Sleep. 4. Set the sensitivity. The higher sensitivity you set, the faster ZEEQ will enter Auto Sleep. 5. Set your alarm and wake settings. 6. Save your settings in the ZEEQ app. *This must be done near your ZEEQ To start and stop sleep from your remote, simply press the button on the remote 5 times. The light on the remote will go from green to blue when entering sleep mode. When waking up, the light will return to green. 10

13 FAQ s Music is coming from my phone and not from ZEEQ. Check that ZEEQ is connected to Bluetooth on your phone. In the Bluetooth settings on your phone, look for REM-Audio. If it is not connected, follow the instructions in the ZEEQ app to connect. Make sure no other Bluetooth speakers or headsets are connected to your phone while using ZEEQ. Can I use ZEEQ as a speaker without going to sleep? Yes, you can use the ZEEQ app to turn the ZEEQ speakers on, set a timer and select music to listen to. You can put ZEEQ into speaker mode and listen to any audio from your phone. Press the power button on ZEEQ 3 times quickly. In a moment the second LED will begin to blink blue. Once it is connected you your phone it will turn solid then fade away. You can now listen to any audio from your phone and it will play through ZEEQ speakers. ZEEQ is not vibrating when I snore. The Snore Alarm button should be enabled in the ZEEQ app (on the home screen) before you begin sleeping to react to snoring. Check the Snore Alarm settings in the ZEEQ app. You may need to adjust the Snore sensitivity in the app. How do I check the battery status of ZEEQ? You can see the current battery status in the ZEEQ app. Simply click the settings icon (the three stacked lines on the top left of the ZEEQ app) and you will see a battery icon at the top. You can also check the battery status every time you power up your ZEEQ. See page 6 of the manual for more details. Can I use ZEEQ while charging? No, ZEEQ can not & will not function while charging. Additionally, you should always have at least 25% charge before starting a sleep session. 11

14 Specifications Model: Dimensions (Inches): Weight: Battery: Battery Life: Battery Capacity: Wireless: Wireless Range: App Requirements: RFZQ H x 26.5 W x 5.5 D 7 lbs. Lithium Ion 3.7v Rechargeable Battery 5-15 days 5000mah Music and Data Transmission 10m (30 feet) Requires ios 8.2 or above Android 4.3 Jelly Bean or above Requires BLE support Designed in Wheeling, IL - Made in China by JAB Distributors LLC REM-Fit 12

15 Care & Maintenance CAUTION! RISK OF EXPLOSION IF BATTERY IS ALTERED OR REPLACED. THE ZEEQ BATTERY IS NOT USER REPLACEABLE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL LAWS. Do not excessively bend this product. The product has built-in sensors and excessive bending may cause damage to those sensors. You CANNOT use the product during recharging. Do not allow the product to come into contact with water as it may cause damage to the inside of the product. ZEEQ includes a removable and washable pillow cover. DO NOT wash the ZEEQ pillow or the internal components. When the power adapter is inserted into a power outlet, do not touch the metal end of the power adapter. Please ensure that ZEEQ is not close to any source of excessive vibration or noise to ensure that the sensors can accurately detect and monitor the users sleep. Vibrations and noise caused by electric fans, washing machines or loud music etc. can lead to inaccuracies in the product monitoring. Do not use ZEEQ in an environment with extreme high or low temperatures. Avoid exposing ZEEQ to direct sunlight or high humidity. The acceptable temperature for this product and accessories is between 50 F F. ZEEQ Speaker Mode is limited to 2 hours per session to preserve battery life. Take care to listen to music at an appropriate volume. Note: Please charge the battery at least once a month to prolong battery life and maintain ZEEQ 13

16 Health & Safety Please note that ZEEQ is not a medical device. All information provided by ZEEQ and the accompanying ZEEQ app are for informational purposes only. You should consult with your physician before using any sleep aid regimen. Attention! For users with medical illnesses or diseases, measures should be taken to regularly and personally monitor your health situation by a licensed professional. Please be aware that this product must not be used for persons who are fitted with a heart pacemaker. This product is not designed for monitoring the sleep quality of people under the age of eighteen. ZEEQ may contain small parts. Use caution when adjusting the filling of ZEEQ. Do not use or sleep on ZEEQ while charging. Do not leave ZEEQ unattended while charging. The ZEEQ battery is not user serviceable. Do not attempt to access it. If ZEEQ is damaged, discontinue use immediately. Only use approved chargers and cables when charging ZEEQ. 14

17 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. 15 FCC ID: 2AJC4-RFZQ01

18 Additional Statements: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence. L exploitation est autorisée aux deux conditions suivantes : (1) l appareil ne doit pas produire de brouillage, et (2) l utilisateur de l appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d en compromettre le fonctionnement Product Description: Smart Pillow REM-Fit and ZEEQ are trademarks of REM-Fit. Apple, the Apple logo, ipad and iphone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. The CES Innovation Awards are based upon descriptive materials submitted to the judges. CTA did not verify the accuracy of any submission or of any claims made and did not test the item to which the award was given IC: RFZQ01 Model: RFZQ01 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the Eu. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Rated input voltage: 5V Rated input current: 1.5A Operating temperature: 50 F-100 F 16

19 JAB Distributors LLC DBA REM-Fit