INSTRUMENT CONTROLLER
|
|
- Deborah Porter
- 5 years ago
- Views:
Transcription
1 Syllabus for the trade of INSTRUMENT CONTROLLER Under Apprenticeship Training Scheme By Government of India Ministry of Labour & Employment (D.G.E.&T.) CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE EN Block, Sector V, Salt Lake City Kolkata
2 List of the Trade Committee Members designed and approved the syllabus for the trade of INSTRUMENT CONTROLLER under Apprenticeship Training Scheme Shri S.D. Lahiri Director C.S.T.A.R.I., Kolkata Sr Name & Designation Address Remarks 1 Mr. Haritash Gulshan, Director Training & Employment, Chairman Uttrakhand, Haldwani (Nainital) 2 Mr L.K. Mukherjee, Deputy Director CSTARI, Kolkata Member 3 Mr A Rarhi, Deputy Director CSTARI, Kolkata Member 4 Mr Mayank Agrawal, Principal Govt. I.T.I. (B), Kashipur Member 5 Mr S. Devrajan India Glycols Ltd., Kashipur Member Asst. General Manager 6 Mr J. Khuntia India Glycols Ltd., Kashipur Member Deputy General Manager 7 Mr R. J. Singh Govt. Polytechnic, Kashipur Member Workshop Supdt. 8 Mr P.C. Navani, Foreman Govt. I.T.I. (B), Kashipur Member 9 Mr Vinod Kumar, Engineer Kashipur Sugar Mill, Kashipur Member 10 Mr Rohan Pathak, Off. ERD Mahindra & Mahindra Ltd. Lalpur Member 11 Mr Ankur Agrawal Mahindra & Mahindra Ltd. Lalpur Member Deputy manager 12 Mr Himanshu Marwat Naini Tissues Ltd., Kashipur Member Manager (Elec) 13 Mr N.C. Pant, Sr. Manager Naini Tissues Ltd., Kashipur Member 14 Mr Vivek Varshney, GM (Maint) Banwari Paper Mill, Kashipur Member 15 Mr Anil Kumar Banwari Paper Mill, Kashipur Member Incharge Technician 16 Mr Romesh Sharma Nestle India Ltd., Pantnagar Member Executive 17 Mr R.N. Pande Tata Motors Ltd., Pantnagar Member Divisional Manager 18 Mr Praguman Verma Tata Motors Ltd., Pantnagar Member Asstt. Manager 19 Mr Raj Deep Sharma Govt. I.T.I. (B), Kashipur Member Instructor 20 Mr G.D. Sharma, Instructor Govt. I.T.I. (B), Kashipur Member 21 Mr Anurodh Sharma Dabur India Ltd., Pantnagar Member Executive 22 Mr S.K. Singh Alps Industries Ltd., Kashipur Member General Manager 23 Mr S. Nagar, Manager (HR) Pepsico India Holdings Pvt. Ltd., Bazpur Member 2
3 General information 1. Name of the designated trade : Instrument Controller 2. N.C.O. Code No. : Educational Qualification : Passed 10 th class examination under 10+2 system of education or its equivalent. 4. Duration of Apprenticeship Training : Two years 5. Rebate : One year & six months Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Instrument Maintenance of Process Plant. 6. Ratio of Apprentice to Workers : 1:3 7. Terminal Behavior : On completion of the training the trainee Will be able to work as an Instrument Controller in any Process Plant. Course Outline The training shall comprise of- a) On the job training The actual training shall be depended on the facilities available in the establishment, with an idea to expose the trainees to as many activities as possible. The trainees shall maintain a daily work diary for the on job training, which shall be periodically authenticated by the supervisor. b) Project Group / Individual apprentice shall under take a project in any of the areas depending on his/her interest and facilities available in the establishment. The duration of the project shall be four weeks. 3
4 Syllabus for the trade of Instrument Controller under Apprenticeship Training Scheme Shop Floor Training: 6 months The syllabus of this trade should be considered as a guide for imparting apprenticeship training according to the facilities available in the industry. (list of operations in Petro-Chemicals, Heavy Chemicals, Fire Chemicals, Paper & Pulp, Cement, Fertilizer and allied industries where electrical equipments and gadgets are install & function) Orientation i) The plant and its products, raw materials used for production ii) Different sections of the plant iii) Different instruments used in different section and its function. iv) Instrument in Control panel and its lay out Safety: i. Cause and prevention of accidents first aid to the injured ii. Electrical safety and hazards iii. Industrial safety and personnel safety and its protection iv. Fire prevention and fighting Practical Training: i. Familiarization with instruments used in industries and its function. ii. Fittings, calibration and maintenance of pressure gauge iii. Maintenance, reconditioning & calibration of thermocouple iv. RTD, Thermostat & thermister application & function v. Maintenance of flow switch, different type of flow-meter, electromagnet flow meter etc. vi. Maintenance of different type of level indicator, level switch and magnetic level gauge. 4
5 vii. Maintenance and calibration of flue gas analyzer, SOx & NOx analyzer, photo meter, colorimeter, potentiometer, viscometer and conductivity meter etc. viii. Maintenance and calibration of different electrical measuring instrument digital and analog (Ammeter, Voltmeter, Wattmeter, AVO meter, PF meter etc.) ix. Maintenance & calibration of different type of transmitters, converter and recorder (pneumatic & electronic) x. Working on different controllers and identification of its component and calibration (ON-OFF & PID controller) xi. Working and maintenance on solenoid control valve, control valve with potentiometer etc. xii. Working and maintenance temperature scanners. xiii. Working on micro processor kit, flow charts and making programme. xiv. Working on logic relay control, programmable logic controller and digital controller system. xv. Troubleshooting of controllers and identification of its parts. xvi. Working on different type of transducers, application and its measurement procedure. The practical training programme of the apprentices under ATS should be as per the facilities available in the industry / Establishment. SYLLABUS FOR RELATED INSTRUCTIONS The syllabus for related instructions should be considered as guide. The subjects to be taught to the apprentices in related instruction. 1. Trade theory 2. Industrial entrepreneurship. 5
6 Examination Scheme for the trade of Instrument Controller S.No Title Total Marks Minimum Marks Marks Obtained 1 PRACTICAL Project work based on Practical Training in respective Industry Practical Test /Viva based on Practical training in Respective Industry Theory Total
Multimedia and Web Page Designer
Syllabus for the trade of Multimedia and Web Page Designer Under APPRENTICESHIP TRAINING SCHEME By Government of India Ministry of Labour & Employment (D.G.E.&T.) CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
More informationCOMPUTER OPERATOR AND PROGRAMMING ASSISTANT
SYLLABUS FOR THE TRADE OF COMPUTER OPERATOR AND PROGRAMMING ASSISTANT Under Apprenticeship Training Scheme (ATS) Designed in 2010 by Government of India Ministry of Labour & Employment (D.G.E & T) CENTRAL
More informationLearners can have choices to obtain qualification from any of the following: Advanced Diploma in Instrumentation Maintenance Technician - IVQ: Level 3
1 Head Office: SIIT BuildingMain Road, Thalayolaparambu, Kottayam Dist., Kerala, India, PIN: 686 605 : 0489 236669, : +91 99 61 73 66 55, 99 61 97 66 33 e-mail : siit@siitonline.com, www.siitonline.com
More informationSYLLABUS. Departmental Syllabus. Communication Fundamentals ELET0206. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus
SYLLABUS DATE OF LAST REVIEW: 02/2013 CIP CODE: 46.0302 SEMESTER: COURSE TITLE: COURSE NUMBER: Communication Fundamentals ELET0206 CREDIT HOURS: 2 INSTRUCTOR: OFFICE LOCATION: OFFICE HOURS: TELEPHONE:
More information2. Acquired the know how about the principle of automation. 3. The capability to understand the PLC based systems and machinery.
Programmable Logic Control (3-Month Course) 1 TRAINING OBJECTIVES: The objective of the course is to impart training in field of automation. As in this age industrial automation is growing more and more
More informationAbout NIELIT. Demands for Courses in Computer Hardware
About NIELIT NIELIT is an autonomous scientific society under the administrative control of Department of Electronics and Information Technology (DeitY), Ministry of Communications & Information Technology,
More informationPosition Title: H V A C T E C H N I C I A N. G.E.D. or High School Diploma required, an Associate s Degree is preferred.
Location Beeville-Primary; All Campuses Hours 40 hours/week minimum Salary $40,000-$50,000 annual, based on KSAs Job Classification Exempt Security Sensitive Y e s Division Physical Plant Department Physical
More informationHINDUSTAN SHIPYARD LIMITED:: VISAKHAPATNAM
HINDUSTAN SHIPYARD LIMITED:: VISAKHAPATNAM 530 005 (A Government of India Undertaking) **** HSL is the pioneer Shipbuilding and Ship repairs Yard functioning under the Ministry of Defence. The Company
More informationApprenticeship Curriculum Standard. Level 3. Trade Code: 447A
Apprenticeship Curriculum Standard Instrumentation and Control Technician Level 3 Trade Code: 447A Development Date: 2008 Please Note: Apprenticeship Training and Curriculum Standards were developed by
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: DCS AND SCADA (COURSE CODE: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: DCS AND SCADA (COURSE CODE: 3361703) Diploma Programme in which this course is offered Instrumentation and Control Engineering
More information"MATERIAL SAFETY DATA SHEETS: THE ANSI STANDARD"
MAJOR PROGRAM POINTS "MATERIAL SAFETY DATA SHEETS: THE ANSI STANDARD" Part of the "GENERAL SAFETY SERIES" Quality Safety and Health Products, for Today... and Tomorrow Outline of Major Points Covered in
More informationKENYA SCHOOL OF GOVERNMENT EMPLOYMENT OPORTUNITY (EXTERNAL ADVERTISEMENT)
KENYA SCHOOL OF GOVERNMENT EMPLOYMENT OPORTUNITY (EXTERNAL ADVERTISEMENT) 1. DIRECTOR, LEARNING & DEVELOPMENT - LOWER KABETE Reporting to the Director General, Campus Directors will be responsible for
More informationApprenticeship and Industry Training Act
Apprenticeship and Industry Training Act Certification and Certificate Recognition Order Board Order 2/2009 Consolidated to September 22, 2017 NOTE This is an order of the Alberta Apprenticeship and Industry
More informationTata Hitachi JIM (Japan-India Institute for Manufacturing)
1 Tata Hitachi JIM (Japan-India Institute for Manufacturing) Presenter : Sandeep Singh, Managing Director Tata Hitachi Construction Machinery Co. Pvt. Ltd. 1 st May 2018, New Delhi 2 About Tata-Hitachi
More informationIbrahim H. Khleifat. Summary of Qualifications:
Ibrahim H. Khleifat Summary of Qualifications: Possess more than 15 years of professional engineering experience in Learning and Training in Electrical, Mechanical and Instrumentation & process control
More informationSTATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT INSTRUMENTATION AND CONTROLS
STATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT 220 - INSTRUMENTATION AND CONTROLS Prepared By: Daniel Miller Revised By: Daniel Miller 4/5/12 CANINO SCHOOL OF ENGINEERING
More informationASSE PROFESSIONAL CERTIFICATION PROGRAMS PROCTOR GUIDE
ASSE International ASSE PROFESSIONAL CERTIFICATION PROGRAMS PROCTOR GUIDE This guide was established to provide uniformity and requirements for proctoring ASSE Certification program exams. An ASSE accredited
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description "Industrial Electrician" means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated
More informationAccredited Testing Facility (ATF) 3 rd Year On-Site Audit Checklist
Facility Information: ATF Certificate #: Test Facility Name: Test Facility Representative: Address: City: State Zip: Phone Phone: Fax: Email: Facility Assessor: AWS Auditor: Date: Date: 3 rd Year On-Site
More informationSHIVAJI UNIVERSITY, KOLHAPUR.
SHIVAJI UNIVERSITY, KOLHAPUR. Draft Programme For Department SUK MCA (CBCS) March/April 2018 Exam Circular No.105 Exam. March/April 2018 Draft Programme of M. C. A. (Under the Faculty of Science) Choice
More informationINITIAL FACE OF AUTOMATION PROGRAMMABLE LOGIC CONTROLLER
INITIAL FACE OF AUTOMATION PROGRAMMABLE LOGIC CONTROLLER SHRI BHAGWAN Shekhawati Group of Institute E-mail: Sri29bishnoi@gmail.com Abstract- This paper presented on Programmable Logic Controller (PLC)
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationGENERAL CONDITIONS FOR POWER ENGINEERING EXAMINATIONS AND REFRIGERATION OPERATORS A AND B AND COMPRESSOR OPERATORS
GENERAL CONDITIONS F POWER ENGINEERING EXAMINATIONS AND REFRIGERATION OPERATS A AND B AND COMPRESS OPERATS TABLE OF CONTENTS PAGE 1. Definitions..3 2. Classification..3 3. Applications for Examinations.3
More informationFundamentals of circuits with contacts
Fundamentals of circuits with contacts Workbook TP 1211 With CD-ROM 24 V F1 1 2 1 2 3 4 5 6 7 21 F2 22 21 S2 22 S1 13 21 43 Q1 43 Q2 S3 14 13 Q1 21 14 22 13 44 Q2 13 14 15 K1 K1 44 25 22 14 16 28 21 21
More informationMADISON METROPOLITAN SCHOOL DISTRICT
MADISON METROPOLITAN SCHOOL DISTRICT HUMAN RESOURCE POLICIES AND PROCEDURES Subject: Use of MMSD Telephones Policy #: 1.17 Source(s): MMSD Telephone Policy I. Introduction to MMSD Telephone Policy The
More informationModel Curriculum. Telecom Embedded Hardware Developer SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: TELECOM HANDSET DEVELOPMENT TESTING AND SUPPORT TEL/Q2303 4 2 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites 05 3. Annexure:
More informationDIRECTORATE OF TECHNICAL EDUCATION, PEC UNIVERSITY OF TECHNOLOGY CAMPUS, SECTOR-12, UT, CHANDIGARH. PUBLIC APPOINTMENTS
DIRECTORATE OF TECHNICAL EDUCATION, PEC UNIVERSITY OF TECHNOLOGY CAMPUS, SECTOR-12, UT, CHANDIGARH. PUBLIC APPOINTMENTS Applications are invited to fill up the following four posts of Instructors on Contract
More informationSociety for Applied Microwave Electronics Engineering & Research Millimeter Wave Technology Centre
Advertisement No.: 09/2018 WALK-IN INTERVIEW FOR CONTRACT POSITIONS Society for Applied Microwave Electronics Engineering & Research (SAMEER) is an autonomous Research & Development Institute under the
More informationFurniture and Fittings Skill Council (FFSC) Summative Assessment Framework
Furniture and Fittings Skill Council (FFSC) Summative Assessment Framework The assessment will happen based on the following chart: Level L1- L2 20% Written + 20% Viva+ 60% Practical Knowledge and Skill
More informationModel Curriculum. Broadband Technician SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Broadband Technician SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: TELECOM PASSIVE INFRASTRUCTURE CUSTOMER SERVICES TEL/Q0102 4 TABLE OF CONTENTS 1. Curriculum 2. Trainer Prerequisites
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationStudent User Manual. Online Admission System
Student User Manual For Online Admission System Skill Development & Industrial Training Department, Haryana Table of Contents S. No Particulars Page No. 1.0 Introduction 3 2.0 Online Admission System 4-7
More informationPolicies and Procedures. 636G Apprenticeship. Gas Technician Certification
Policies and Procedures (under Ontario Regulation 215/01, Technical Standards and Safety Act, 2000) Technical Standards and Safety Authority (TSSA) Fuels Safety Training and Certification www.tssa.org
More informationPreferred Industry: EPC / Oil & Gas / Energy sector/cement & Steel Industry
TANVEER HUSSAIN Qualified B.Sc. (Electronics and Instrumentation ing) Graduate with expertise in Field Instrumentation and Control System Maintenance and Project Management. Preferred Industry: EPC / Oil
More informationIndustrial Automation & Instrumentation
Industrial Automation & Instrumentation November 16, 2017 By: ENGR. GAMALIEL F. ITAO, P.E.E, M.Entr. President, ICC-MTC ABSTRACT The paper deals with the definition of Instrumentation and (Industrial)
More informationA Guide to the Automation Body of Knowledge
A Guide to the Automation Body of Knowledge 2nd Edition Vernon L. Trevathan, Editor Table of Contents Preface, xv Basic Continuous Control, 1 1 Process Instrumentation, 3 1.1 Introduction, 3 1.2 Pressure,
More informationTechnical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document
Technical Standards and Safety Authority Policies and Procedures: Record of Training Policy Document Table of Contents Policies and Procedures Introduction...1 Background and Intent...1...1 Instructor
More informationHannover Milano Fairs India Pvt. Ltd.
Joint Organisers for MDA INDIA Knowledge Partner for Automation Training Zone Hannover Milano Fairs India Pvt. Ltd. HANNOVER MESSE connect India was a Partner Country at Hannover Messe 2015 and had a wonderful
More informationNot Just a Degree. Join 100% Job Oriented Industry Ready Distance & Regular Education. Your Next Aim to A Successful Career
Not Just a Degree. Join 100% Job Oriented Industry Ready Distance & Regular Education Your Next Aim to A Successful Career GTECH INSTITUTE FOR IT & MANAGEMENT GOVT. REGD. SKILL DEVELOPMENT ORGANIZATION
More informationPETROLEUM EQUIPMENT INSTALLER
PETROLEUM EQUIPMENT INSTALLER Occupation Description s work in the downstream petroleum sector of the oil and gas industry. They install and remove storage tanks and transfer, handle and dispense equipment
More informationTRUCK AND TRANSPORT MECHANIC (COMMERCIAL TRANSPORT VEHICLE MECHANIC) INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description
TRUCK AND TRANSPORT MECHANIC Occupation Description means a person who maintains, rebuilds, overhauls, reconditions, and does diagnostic troubleshooting of motorized commercial truck, bus, and road transport
More informationPROGRAMMABLE LOGIC CONTROLLERS. Wiley USING CODESYS A PRACTICAL APPROACH TO IEC. Dag H. Hanssen Institute of Engineering and Safety,
PROGRAMMABLE LOGIC CONTROLLERS A PRACTICAL APPROACH TO IEC 61131-3 USING CODESYS Dag H. Hanssen Institute of Engineering and Safety, University oftroms0, Norway Translated by Dan Lufkin Wiley Contents
More informationLab Quality Management System- Technical Manager
TIPS ONLINE TRAINING & CERTIFICATION Information Brochure Training On Lab Quality Management System- Technical Manager Training Code: TIPS/T/LQMS/TM Page 1 of 7 Training Program On Laboratory Quality Management
More information1st Stage CBT. Subjects RRB COACHING RRB JUNIOR ENGINEER RECRUITMENT PROCESS:
RRB COACHING RRB JUNIOR ENGINEER RECRUITMENT PROCESS: Only single online application {common to all the notified posts in opted RRB - Junior Engineer (JE), Junior Engineer (Information Technology) [JE(IT)],
More informationStudy Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards
BOS/PE/1 Study Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards Guru Nanak Dev Engineering College (An Autonomous College U/S [2(f) and 12 (B) of UGC Act 1956) NBA Accredited Programmes
More informationNZQF NQ Ref 1545 Version 2 Page 1 of 13
NZQF NQ Ref 1545 Version 2 Page 1 of 13 National Certificate in (Level 5) with strands in Engineering Fabrication, Fire Protection, General and Maintenance Engineering, Mechanical Services, and Precision
More informationSECURITY SYSTEMS TECHNICIAN
SECURITY SYSTEMS TECHNICIAN Occupation Description System means a person who designs, installs, repairs, maintains, replaces, tests, services the operation of all electronic security systems in accordance
More informationThe American Society Of Phlebotomy Technicians, INC
The American Society Of Phlebotomy Technicians, INC Information Packet Charleston Location 1810 Trolley Rd. Suite A Summerville, SC 29485 843-970-8150 scoffice@asptsc.com Hickory Location P.O. Box 1831
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description Industrial s inspect, install, test, troubleshoot, repair, and service industrial electrical equipment and associated electrical and electronic controls. Service
More informationCompEx TRAINING: CompEx Ex01, Ex02, Ex03 & Ex04
ROQQY TRAINING & DEVELOPMENT CompEx TRAINING: CompEx Ex01, Ex02, Ex03 & Ex04 Roqqy As a partner for PROTECHNIS, Roqqy is pleased to offer the CompEX training proposal Nov 23 th 2016 Table of Contents 1.0
More informationAdvanced Control Foundation: Tools, Techniques and Applications. Terrence Blevins Willy K. Wojsznis Mark Nixon
Advanced Control Foundation: Tools, Techniques and Applications Terrence Blevins Willy K. Wojsznis Mark Nixon Contents Acknowledgments About the Authors vii xvii Foreword xxi Chapter 1 INTRODUCTION 1 Chapter
More informationGROUND FAULT CIRCUIT INTERUPTERS
Title: GFCI Effective Date: 11/14/2014 Control Number: THG_0031 Revision Number: 1 Date: 10/21/2015 Annual Review Completed: 5/13/2015 GROUND FAULT CIRCUIT INTERUPTERS CONTENTS I. PURPOSE II. GENERAL REQUIREMENTS
More informationDistributed Control System Design Standards
Distributed Control System Design Standards I. Background and Overview A. The City s Program Standards and Procedures (PSP) are intended to be used in conjunction with the data contained in related standards
More informationModel Curriculum. Equity Dealer. Equity Dealer SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: BFSI Financial Services Broking/Trading BSC/Q0201, Version No. 1.0 4 Format: ModCur_2015_1_0 Table of Content: Curriculum... 3
More informationNPTEL
NPTEL Syllabus Automation & Sensor Interface Laboratory - Web course COURSE OUTLINE Automation & Sensor interface laboratory is an application oriented course with review of automation principles, followed
More informationCITY UNIVERSITY OF NEW YORK. Creating a New Project in IRBNet. i. After logging in, click Create New Project on left side of the page.
CITY UNIVERSITY OF NEW YORK Creating a New Project in IRBNet i. After logging in, click Create New Project on left side of the page. ii. Enter the title of the project, the principle investigator s (PI)
More informationOIL AND NATURAL GAS CORPORATION LIMITED DEPARTMENTAL CIRCULAR
OIL AND NATURAL GAS CORPORATION LIMITED MBA BASIN, RECRUITMENT & PROMOTION SECTION ANNEXE BUILDING, IISCO BUILDING, FIRST FLOOR 50, J.L. NEHRU ROAD, KOLKATA 700 071. No.MBA/HR-R&P/Rectt/A-W/CBMDP/1/2013
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationApprenticeship and Industry Training
Apprenticeship and Industry Training About Apprenticeship and Industry Training Part of Apprenticeship and Student Aid Division, Ministry of Advanced Education Administer Alberta s apprenticeship and industry
More informationJEFFERSON COLLEGE COURSE SYLLABUS HRA249 COMMERCIAL REFRIGERATION SYSTEMS. 5 Credit Hours. Prepared by William Kaune November 30, 2010
JEFFERSON COLLEGE COURSE SYLLABUS HRA249 COMMERCIAL REFRIGERATION SYSTEMS 5 Credit Hours Prepared by William Kaune November 30, 2010 Revised by William Kaune April 25, 2012 Mary Beth Ottinger, Ph.D., Division
More informationProject Execution Best Practices
Project Execution Best Practices Tips & Tricks based on lessons learnt 1 Successful Implementation & Improved Operation Temporary vs. Permanent Communication Ad-hoc Communication: Handheld field communicators
More informationShivaji University, Kolhapur
1 Shivaji University, Kolhapur Choice Based Credit System (CBCS) Bachelor of Science (B. Sc.) Program Under Faculty of Science & Technology (To be implemented from Academic Year 2018-19) 2 Shivaji University,
More informationRailway Exam Pattern & Syllabus: 26,502 Vacancies
: 26,502 Vacancies Railway Recruitment Board has released the recruitment notification on 2nd Feb 2018 for the posts of Assistant Loco Pilot & Technicians. In this article we are providing exam pattern
More informationControlling and Monitoring Of Industrial Parameters by Using GSM
Controlling and Monitoring Of Industrial Parameters by Using GSM GUIDE: Mr. S. CHANDRA SHEKAR, PROFESSOR IN ECE P.WASEEM NAZMA, G.SUDHA PRIYANKA, S.DHANA LAKSHMI, SK.SHAHID DEPARTMENT OF ELECTRONICS AND
More information"Charting the Course to Your Success!" MOC Microsoft SharePoint 2010 Site Collection and Site Administration Course Summary
MOC 50547 Microsoft SharePoint Site Collection and Site Course Summary Description This five-day instructor-led Site Collection and Site Administrator course gives students who have SharePoint Owner permissions
More informationAnnexure I: Contact Details:
Ref: CO/IT-BPR/CSC Date:.09.2017 Annexure I: Contact Details: a) Name of the company b) Company s address in India c) Contact person d) Telephone no. e) Fax f) E-mail address g) Service tax registration
More informationAccreditation from Quality Council of India for ITI s - User Manual
Accreditation from Quality Council of India for ITI s - User Manual Version 1 September, 2012 2012 NABET. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part,
More information(b) Primary headwater stream habitat assessment.
3745-4-03 Qualified data collectors. (A) Requirements to become a qualified data collector (QDC). (1) Level 1 requirements. (a) An individual may obtain level 1 QDC status by documenting completion of
More informationLOCATION Delivered at one of PMV s national training centres (Perth and Brisbane), or at a client s facility.
- CERTIFICATE III IN INSTRUMENTATION AND CONTROL WHO IS THIS COURSE AIMED AT? The Certificate III course is aimed at those who would like to enhance their PLC, HMI and process skills giving them the edge
More informationThe SLG discussion was initiated with opening remarks by Chairman, Shri Vivek Agrawal, Chief Operating Officer, Godawari Power & Ispat Limited.
Minutes of the 1 st Sector Learning Group Meeting of the Iron & Steel Sector 3 rd March, 2016 at Raipur, Chhattisgarh The first Sector Learning Group (SLG) meeting of the Iron & Steel Sector was organized
More information"Charting the Course... MOC B Updating Your SQL Server Skills to Microsoft SQL Server 2014 Course Summary
Course Summary Description This five-day instructor-led course teaches students how to use the enhancements and new features that have been added to SQL Server and the Microsoft data platform since the
More informationCCST Examination Application
1. APPLICANT INFORMATION (Please print or type.) Prefix: Mr. Mrs. Ms. Miss Other Last name First name MI (you must provide your name as it appears on your photo identification) Membership IBEW UA Member
More informationINSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC)
INSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC) Occupation Description ation and Control Technician means a person who installs, repairs, maintains, replaces, calibrates, programs
More information"Charting the Course... ITIL 2011 Operations Support Analysis (OSA) Certification Program. Course Summary
Description Course Summary ITIL is a set of best practices guidance that has become a worldwide-adopted framework for IT Service Management by many Public & Private Organizations. Since early 1990, ITIL
More informationReservation GT-3; Diploma:28,100/- MBC/DNC-1; Semi Skilled (B) (Boiler Operator) / Semi Skilled (A) (Boiler Operator) SC-1 GT-4; BC-2; BCM-1;
TAMIL NADU NEWSPRINT AND PAPERS LIMITED TNPL, a well known Paper Manufacturing Company with a turnover of over ` 2400 Crore requires the following personnel for its Paper Mill, & Lime Sludge and Fly Ash
More informationDEVELOP YOUR SKILLS & GET A REPUTED JOB
DEVELOP YOUR SKILLS & GET A REPUTED JOB JOIN 100% JOB ORIENTED INDUSTRY READY SKILL DEVELOPMENT COURSES GTECH INSTITUTE FOR IT & MANAGEMENT GOVT. REGD. SKILL DEVELOPMENT ORGANIZATION ISO 9001:2015 CERTIFIED
More informationINSTRUCTOR CERTIFICATION PROGRAM
ADDA International 105 East Main Street Newbern, TN 38059 Telephone 731-627-0802 INSTRUCTOR CERTIFICATION PROGRAM The ADDA Instructor Certification Program is designed to provide professional recognition
More informationTechnical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document
Technical Standards and Safety Authority : Record of Training Policy Document This document is uncontrolled if printed Contents... 1 of Training Providers/Organizations for Record of Training (ROT)...
More informationSYLLABUS. Departmental Syllabus CIST0161. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus
SYLLABUS DATE OF LAST REVIEW: 02/2013 CIP CODE: 11.0901 SEMESTER: COURSE TITLE: COURSE NUMBER: System Manager (Windows 2008 Server) CIST0161 CREDIT HOURS: 4 INSTRUCTOR: OFFICE LOCATION: OFFICE HOURS: TELEPHONE:
More informationAWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director
AWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director American Welding Society 1919 1971 New York City, NY 1971 Present Miami,
More information+91-8048764953 Countronics http://www.processcontrols.co/ An ISO 9001:2008 certified company, we are a leading manufacturer and exporter of electronic process control instruments for industrial use. We
More informationSYLLABUS. Departmental Syllabus CIST0147. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus
SYLLABUS DATE OF LAST REVIEW: 11/6/2018 CIP CODE: 52.0104 SEMESTER: COURSE TITLE: Computer Operating Systems: (Windows 7) COURSE NUMBER: CIST0147 CREDIT HOURS: 4 INSTRUCTOR: OFFICE LOCATION: OFFICE HOURS:
More informationINSULATOR (HEAT AND FROST)
INSULATOR (HEAT AND FROST) INDUSTRY TRAINING PROGRAM PROFILE Occupation Description s (Heat and Frost) work with different kinds of insulating material to prevent or reduce the passage of heat, cold, vapour,
More information****This form is to be filled out by the candidate.****
SSPC Use Only Date Verified Work Ex. Date Verified Edu. Application Form SSPC Coating Application Specialist (CAS) - Level 2 Certification Program (Full Status) ****This form is to be filled out by the
More informationFORUM LOAD DESPATCHERS (FOLD)
CHARTER OF FORUM OF LOAD DESPATCHERS (FOLD) FOLD Secretariat NLDC,B-9 Qutab Institutional Area, New Delhi http://www.forumofld.in http://www.forumofloaddespatchers.in Table of Contents 1. Background...3
More informationBasics of Industrial Electricity and Troubleshooting Electrical Control Circuits
Basics of Industrial Electricity and Troubleshooting Electrical Control Circuits Course Details Date: January 28 January 31, 2019 Time: 8:00 A.M. - 4:30 P.M. Capacity: 12 attendees Provider: National Technology
More informationSYLLABUS DEPARTMENTAL SYLLABUS. Laptops and Mobile Devices CRTE0108 DEPARTMENTAL SYLLABUS DEPARTMENTAL SYLLABUS DEPARTMENTAL SYLLABUS
SYLLABUS DATE OF LAST REVIEW: 02/2015 CIP CODE: 11.1006 SEMESTER: COURSE TITLE: COURSE NUMBER: Laptops and Mobile Devices CRTE0108 CREDIT HOURS: 3 INSTRUCTOR: OFFICE LOCATION: OFFICE HOURS: TELEPHONE:
More informationPerformance Verification Packet. Industrial Maintenance Electrical and Instrumentation Technician
Performance Verification Packet Industrial Maintenance Electrical and Instrumentation Technician This performance verification is designed as one method to evaluate job skills and safe work habits of a
More informationRequirements for the Certification of a Welding Quality Control Co-ordinator
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP- QCC-20-08 Requirements for the Certification of a Welding Quality Control Co-ordinator 2 nd Edition January 2011 Issued under the authority of the
More informationSYLLABUS. Departmental Syllabus. Linux and Windows Practical Server. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus
SYLLABUS DATE OF LAST REVIEW: 1/30/2015 CIP CODE: 11.1006 SEMESTER: COURSE TITLE: COURSE NUMBER: Linux and Windows Practical Server CRTE0202 CREDIT HOURS: 4 INSTRUCTOR: OFFICE LOCATION: OFFICE HOURS: TELEPHONE:
More informationMECHATRONIC LAB ROOM NO: 4201, MECHANICAL DEPARTMENT INTERCOM: 418. INCHARGE: Mr. M. MOHANDASS, Associate Professor, Mechanical
MECHATRONIC LAB ROOM NO: 4201, MECHANICAL DEPARTMENT INTERCOM: 418 INCHARGE: Mr. M. MOHANDASS, Associate Professor, Mechanical ASSOCIATE INCHARGE: K. KARTHEE, Assistant Professor, Mechanical SUPPORTING
More informationModel Curriculum. Assistant Technician: Street Light Installation & Maintenance SECTOR: SUB-SECTOR: OCCUPATION: POWER DISTRIBUTION
Model Curriculum Assistant Technician: Street Light Installation & Maintenance SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: POWER DISTRIBUTION Assistant Technician: Street Light Installation & Maintenance
More informationTOOL AND DIE MAKER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification.
TOOL AND DIE MAKER Occupation Description Tool and Die Maker means a person who makes, repairs and tests dies, cutting tools, jigs, fixtures, moulds, gauges and special hand tools by laying out, setting-up,
More informationSince 2002 SANJARY EDUCATIONAL ACADEMY. ( Governed by Sanjary Educational Academy Society, Govt. Registered No. 348 / 08 ) ISO 9001 : 2008 Certified
S E A TM Since 2002 SANJARY EDUCATIONAL ACADEMY ( Governed by Sanjary Educational Academy Society, Govt. Registered No. 348 / 08 ) ISO 9001 : 2008 Certified Head Officer : S.N0. 24 & 25, 3 rd Floor, SANALI
More informationDUKE UNIVERSITY DESIGN & CONSTRUCTION STANDARDS
1 33 19 00 District Thermal Energy and Water Utility Metering A. GENERAL 1. Duke FMD Utilities & Engineering Services operates district energy and water systems to provide power, heating, and cooling utilities
More informationCATHODIC PROTECTION Certification Program (FOUNDATION & INTERMEDIATE LEVEL)
FINAL CERTIFICATION AWARDED BY IMRTC - USA CATHODIC PROTECTION Certification Program (FOUNDATION & INTERMEDIATE LEVEL) Cathodic protection is a method of reducing or eliminating the corrosion of metals
More informationGlobal Water Instrumentation, Inc.
Global Water Instrumentation, Inc. 11390 Amalgam Way Gold River, CA 95670 T: 800-876-1172 Int l: (916) 638-3429, F: (916) 638-3270 PRODUCT NAME: 3101 Conductivity Controller - 1 - Global Water s Conductivity
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationPARTS AND WAREHOUSING PERSON 1
PARTS AND WAREHOUSING PERSON 1 Occupation Description " " refers to an individual who performs basic warehousing functions which include basic materials handling of all warehouse items, including automotive
More information