This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS 4000.
|
|
|
- Delphia Baker
- 6 years ago
- Views:
Transcription
1 This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS Generic IETF Traps, page 1 SNMP Traps Supported in OTN, page 2 Generic IETF Traps OTN supports the generic IETF traps listed in the following table. call information (Optional) Controls SNMP ISDN call information notifications, as defined in the CISCO-ISDN-MIB (enterprise ). Notification types are: demandnbrcallinformation (1) This notification is sent to the manager whenever a successful call clears, or a failed call attempt is determined to have ultimately failed. In the event that call retry is active, then this is after all retry attempts have failed. However, only one such notification is sent in between successful call attempts; subsequent call attempts do not generate notifications of this type. demandnbrcalldetails (2) This notification is sent to the manager whenever a call connects, or clears, or a failed call attempt is determined to have ultimately failed. In the event that call retry is active, then this is after all retry attempts have failed. However, only one such notification is sent in between successful call attempts; subsequent call attempts do not generate notifications of this type
2 SNMP Traps Supported in OTN chan-not-avail ietf isdnu-interface layer2 (Optional) Controls SNMP ISDN channel-not-available notifications. ISDN PRI channel-not-available traps are generated when a requested DS-0 channel is not available, or when there is no modem available to take the incoming call. These notifications are available only for ISDN PRI interfaces. (Optional) Controls the SNMP ISDN IETF traps. (Optional) Controls SNMP ISDN U interface notifications. (Optional) Controls SNMP ISDN Layer 2 transition notifications. Usage Guidelines SNMP notifications can be sent as traps or inform requests. This command enables both traps and inform requests for the specified notification types. ISDN notifications are defined in the CISCO-ISDN-MIB.my and CISCO-ISDNU-IF-MIB.my files, available on Cisco.com at Availability of notifications will depend on your platform. To see what notifications are available, use the snmp-server enable traps isdn? command. If you do not enter an snmp-server enable traps isdn command, no notifications controlled by this command are sent. In order to configure the router to send these SNMP notifications, you must enter at least one snmp-server enable traps isdn command. If you enter the command with no keywords, all notification types are enabled. If you enter the command with a keyword, only the notification type related to that keyword is enabled. The snmp-server enable traps snmp command is used in conjunction with the snmp-server host command. Use the snmp-server host command to specify which host or hosts receive SNMP notifications. To send SNMP notifications, you must configure at least one snmp-server host command Examples of IETF Traps The following example shows how to determine what notification types are available on a Cisco AS5300 and then shows how to enable channel-not-available and Layer 2 informs: NAS(config)# snmp-server enable traps isdn? call-information Enable SNMP isdn call information traps chan-not-avail Enable SNMP isdn channel not avail traps ietf Enable SNMP isdn ietf traps layer2 Enable SNMP isdn layer2 transition traps <cr> NAS(config)# snmp-server enable traps isdn chan-not-avail layer2 NAS(config)# snmp-server host myhost.cisco.com informs version 2c public isdn SNMP Traps Supported in OTN The following table lists the SNMP Traps Supported in OTN
3 MIB Supported in OTN Table 1: SNMP Traps Supported in OTN coiotnifotustatus coiotnifodustatus MIB Supported in OTN The following table lists the MIBs supported in OTN. Table 2: MIBs Supported in OTN RADIUS-AUTH-CLIENT-MIB RADIUS-ACC-CLIENT-MIB RADIUS-AUTH-CLIENT-MIB CISCO-FLOW-MONITOR-MIB CISCO-IP-CBR-METRICS-MIB CISCO-FLOW-CLONE-MIB ATM-MIB ATM2-MIB CISCO-ATM-EXT-MIB IMA-MIB CISCO-ATM-QOS-MIB CISCO-OAM-MIB IEEE8023-LAG-MIB CISCO-CDP-MIB ISIS-MIB CISCO-CONFIG-MAN-MIB CISCO-IPSEC-POLICY-MAP-MIB CISCO-IPSEC-MIB CISCO-IPSEC-FLOW-MONITOR-MIB ETHERLIKE-MIB CISCO-OTN-IF-MIB
4 MIB Supported in OTN CISCO-FLASH-MIB FRAME-RELAY-DTE-MIB CISCO-FRAME-RELAY-MIB MFR-MIB CISCO-CONFIG-COPY-MIB CISCO-LICENSE-MGMT-MIB CISCO-ENTITY-REDUNDANCY-MIB CISCO-ENHANCED-MEMPOOL-MIB CISCO-MEMORY-POOL-MIB CISCO-PROCESS-MIB CISCO-SYSLOG-MIB CISCO-SYSTEM-MIB CISCO-SELECTIVE-VRF-DOWNLOAD-MIB CISCO-IETF-BFD-MIB CISCO-NTP-MIB IPv6-FORWARD-MIB IP-FORWARD-MIB RSVP-MIB CISCO-TCP-MIB TCP-MIB UDP-MIB BGP4-MIB CISCO-BGP4-MIB CISCO-HSRP-MIB CISCO-HSRP-EXT-MIB RFC2011-MIB CISCO-MLD-SNOOPING-MIB OSPF-TRAP-MIB OSPF-MIB CISCO-IETF-VRRP-07-MIB VRRP-MIB
5 MIB Supported in OTN OSPFV3-MIB CISCO-IP-STAT-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB LLDP-MIB IEEE8021-CFM-MIB OAM-MIB CISCO-IETF-VPLS-BGP-EXT-MIB CISCO-IETF-PW-FR-MIB CISCO-IETF-PW-MIB CISCO-IETF-PW-MPLS-MIB CISCO-IETF-PW-ENET-MIB CISCO-IETF-VPLS-LDP-MIB CISCO-IETF-VPLS-GENERIC-MIB CISCO-TAP2-MIB CISCO-USER-CONNECTION-TAP-MIB CISCO-IP-TAP-MIB CISCO-RTTMON-MIB MPLS-LDP-STD-MIB MPLS-LDP-GENERIC-STD-MIB MPLS-LSR-STD-MIB CISCO-MPLS-TE-STD-EXT-MIB MPLS-TE-STD-MIB CISCO-MPLS-TE-STD-EXT-MIB CISCO-IETF-FRR-MIB CISCO-IETF-MPLS-TE-P2MP-STD-MIB MPLS-L3VPN-STD-MIB DS1-MIB CISCO-DS3-MIB DS3-MIB CISCO-FABRIC-C12K-MIB CISCO-FABRIC-MCAST-APPL-MIB
6 MIB Supported in OTN CISCO-FABRIC-MCAST-MIB CISCO-FABRIC-HFR-MIB CISCO-CLASS-BASED-QOS-MIB CISCO-CLASS-BASED-QOS-MIB CISCO-TEST-MIB CISCO-MIBD-ROUTE-TEST-MIB CISCO-MIBD-INT-TEST-MIB CISCO-ENTITY-ASSET-MIB BRIDGE-MIB CISCO-BULK-FILE-MIB CISCO-BGP-POLICY-ACCOUNTING-MIB CISCO-CONTEXT-MAPPING-MIB CISCO-ENHANCED-IMAGE-MIB ENTITY-MIB ENTITY-STATE-MIB CISCO-ENTITY-STATE-EXT-MIB EVENT-MIB DISMAN-EXPRESSION-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-FTP-CLIENT-MIB IF-MIB CISCO-IF-EXTENSION-MIB IETF-TCP-MIB RFC2465-MIB IPV6-MIB IETF-UDP-MIB MAU-MIB CISCO-MAU-EXT-MIB CISCO-IETF-MSDP-MIB CISCO-IETF-PIM-EXT-MIB PIM-MIB
7 MIB Supported in OTN CISCO-PIM-MIB CISCO-IETF-IPMROUTE-MIB MGMDSTDMIB-MIB IPV6-MLD-MIB NOTIFICATION-LOG-MIB CISCO-P2P-IF-MIB CISCO-PING-MIB CISCO-RF-MIB CISCO-ENTITY-SENSOR-MIB APS-MIB CISCO-SONET-MIB SONET-MIB ATM-FORUM-MIB ATM-FORUM-ADDR-REG ATM-FORUM-SRVC-REG CISCO-SC-MIB HCNUM-TC CISCO-CLASS-BASED-QOS-MIB CISCO-SESS-BORDER-CTRLR-EVENT-MIB CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB mgmtrap dbltrap SNMPv2-MIB
8 MIB Supported in OTN
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
CLI to MIB Trap Mapping and SNMPv3 Configuration
APPENDIXD CLI to MIB Trap Mapping and SNMPv3 Configuration This appendix contains the following topics: Mapping CLI to MIB Traps Configuring Cisco IOS SNMPv3 Mapping CLI to MIB Traps The provides information
This chapter explains Simple Network Management Protocol (SNMP) as implemented by CPT.
This chapter explains Simple Network Management Protocol () as implemented by CPT. Understanding, page 1 Understanding Components, page 2 Understanding MIB, page 4 Understanding Traps, page 7 Understanding
snmp-server enable traps ospf cisco-specific state-change through snmp-server enable traps voice poor-qov
snmp-server enable traps ospf cisco-specific state-change through snmp-server enable traps voice poor-qov snmp-server enable traps, page 2 1 snmp-server enable traps snmp-server enable traps ospf cisco-specific
Cisco NCS 4000 Series MIB Specifications Guide
Cisco NCS 4000 Series MIB Specifications Guide Cisco IOS XR Software Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800
Cisco CRS-1 16-Slot Line Card Chassis Route Processor
Data Sheet Cisco CRS 16-Slot Line Card Chassis Route Processor B The Cisco CRS-1 Carrier Routing System is the industry s first carrier router offering continuous system operation, unprecedented service
Device Configuration Tasks for VNE Creation
APPENDIXA These topics describe the configuration tasks you must perform so that Prime Network can properly model and manage devices. Prime Network automatically performs a series of validation checks
Table of Contents. Cisco Cisco IOS SNMP Traps Supported and How to Configure Them
Table of Contents Cisco IOS SNMP Traps Supported and How to Configure Them...1 Introduction...1 Prerequisites...1 Requirements...1 Components Used...2 Conventions...2 snmp server host Command...2 Syntax
snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit snmp-server enable traps, page 3 snmp-server enable traps (MPLS), page 12 snmp-server enable traps aaa_server, page
HPE FlexNetwork MSR Router Series
HPE FlexNetwork MSR Router Series About the HPE MSR Router Series Command s Part number: 5998-8799 Software version: CMW710-R0305 Document version: 6PW106-20160308 Copyright 2016 Hewlett Packard Enterprise
About the HP MSR Router Series
About the HP MSR Router Series Command (V7) Part number: 5998-7731b Software version: CMW710-R0304 Document version: 6PW104-20150914 Legal and notice information Copyright 2015 Hewlett-Packard Development
To implement LPTS features mentioned in this document you must understand the following concepts:
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
HPE FlexNetwork MSR Router Series
HPE FlexNetwork MSR Router Series About the HPE MSR Router Series Configuration Part number: 5998-8821 Software version: CMW710-R0305 Document version: 6PW106-20160308 Copyright 2016 Hewlett Packard Enterprise
SNMP Commands CHAPTER
CHAPTER 7 This chapter contains the Cisco ONS 15540 ESP-specific SNMP commands. For the complete list of SNMP commands supported on the Cisco ONS 15540 ESP, and their descriptions, refer to Cisco IOS Configuration
Cisco CRS-1 16-Slot Single-Shelf System
Cisco CRS-1 16-Slot Single-Shelf System The Cisco CRS-1 Carrier Routing System is the industry s first carrier router offering continuous system operation, unprecedented service flexibility, and system
Implementing LPTS. Prerequisites for Implementing LPTS. Information About Implementing LPTS
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
Excessive ARP Punt Protection was supported.
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
About the HP A7500 Configuration Guides
About the HP A7500 s The HP A7500 configuration guides are part of the HP A7500 documentation set. They describe the software features for the HP A7500 Release 6620 & 6630 Series, and guide you through
HPE FlexFabric 5950 Switch Series
HPE FlexFabric 5950 Switch Series About the HPE FlexFabric 5950 Configuration Guides Part number: 5200-0808 Software version: Release 6106 and later Document version: 6W100-20160513 Copyright 2016 Hewlett
For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS Configuration Fundamentals Command Reference
CHAPTER 51 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 4500 series switch. Note For complete syntax and usage information for the commands used
Cisco Router Configuration Handbook
Cisco Router Configuration Handbook Second Edition Dave Hucaby, CCIE No. 4594 Steve McQuerry, CCIE No. 6108 Andrew Whitaker Cisco Press 800 East 96th Street Indianapolis, IN 46240 IX Contents Introduction
Cisco IOS XR Software Release for Cisco CRS-1 Routers and Cisco XR Series Routers
. Cisco IOS XR Software Release 3.8.0 for Cisco CRS-1 Routers and Cisco XR 12000 Series Routers No. 534342 Product Overview Cisco IOS XR Software Release 3.8.0 provides additional core routing features
Cisco CRS-3 8-Slot Single-Shelf System
Cisco CRS-3 8-Slot Single-Shelf System The Cisco CRS-3 Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity.
Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers Cisco IOS Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases
COMMAND LINE CHEAT SHEET
BASIC show show show display exit exit / up exit quit run run - - end exit exit all return include match match include formal display-set - - reload request system reboot admin reboot now reboot GENERAL
Introduction to Multi-Protocol Label
Introduction to Multi-Protocol Label Switching (MPLS) Matthew Bocci, Alcatel-Lucent IP Division Agenda History of MPLS Standardisation MPLS Architecture Control Plane QoS and Traffic Engineering Protection
Configuring Layer 3 Virtualization
CHAPTER 14 This chapter describes how to configure Layer 3 virtualization. This chapter includes the following sections: Layer 3 Virtualization, page 14-1 Licensing Requirements for VRFs, page 14-5 Prerequisites
Configuring SNMP. Understanding SNMP CHAPTER
CHAPTER 30 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Cisco ME 3400E Ethernet Access switch. Note For complete syntax and usage information for the commands
Configure ASR9k TACACS with Cisco Secure ACS 5.x Server
Configure ASR9k TACACS with Cisco Secure ACS 5.x Server Contents Introduction Prerequisites Requirements Components Used Configuration Predefined Components on IOS XR Predefined User Groups Predefined
Cisco 3 Gbps Wideband Shared Port Adapter for the Cisco ubr10012 Universal Broadband Router
Data Sheet Cisco 3 Gbps Wideband Shared Port Adapter for the Cisco ubr10012 Universal Broadband Router Product Overview The Cisco 3 Gbps Wideband Shared Port Adapter (SPA) is the next-generation high-density
About the H3C S5130-HI configuration guides
About the H3C S5130-HI configuration guides The H3C S5130-HI configuration guides describe the software features for the H3C S5130-HI Switch Series, and guide you through the software configuration procedures.
Cisco Series Performance Routing Engine 4
Cisco 10000 Series Performance Routing Engine 4 The Cisco 10000 Series Performance Routing Engine 4 (PRE4) (Figure 1) addresses the demand for increased performance, scalability, and hierarchical quality
MIB Specifications. Cisco Series Router MIB Categories CHAPTER
CHAPTER 3 This chapter describes each Management Information Base (MIB) on the Cisco10000Series. Each description lists any constraints on how the MIB is implemented on the router. Unless noted otherwise,
2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.
![2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.](/thumbs/72/66270180.jpg "2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.")
2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown shutdown Use the shutdown interface configuration command to disable an interface. Use the no form of this command to restart a disabled interface.
HP 6125 Blade Switch Series
HP 6125 Blade Switch Series About the HP 6125 Blade s Part number: 5998-3152 Software version: Release 2103 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard
SPECTRUM. Standards-Based Protocol Reference Guide (5186) r9.0
SPECTRUM Standards-Based Protocol Reference Guide (5186) r9.0 This documentation and any related computer software help programs (hereinafter referred to as the Documentation ) is for the end user s informational
0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.
![0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.](/thumbs/71/66077699.jpg "0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.")
0] Chapter 2 shutdown shutdown Use the shutdown interface configuration command to disable an interface. Use the no form of this command to restart a disabled interface. shutdown no shutdown Syntax Description
MPLS VPN MIB Support. Cisco IOS Release 12.0(24)S1 1
MPLS VPN MIB Support This document describes the Simple Network Management Protocol (SNMP) agent support in Cisco IOS for Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) management,
Cisco Catalyst Switch Module 3110 for IBM BladeCenter
Cisco Catalyst Switch Module 3110 for IBM BladeCenter The Cisco Catalyst Switch Module 3110 for IBM BladeCenter represents the next-generation networking solution for blade server environments. Built from
Configuring SNMP. About SNMP. SNMP Functional Overview
This chapter describes how to configure the SNMP feature on Cisco NX-OS devices. This chapter contains the following sections: About SNMP, page 1 Licensing Requirements for SNMP, page 7 Guidelines and
CCIE Service Provider
CCIE Service Provider 1.0 Core Routing 25% 30% 1.1. Interior Gateway Protocol 1.1.a. Describe, implement, and troubleshoot IS-IS 1.1.b. Describe, implement, and troubleshoot OSPFv2 and OSPFv3 1.1.c. Describe
HP 5920 & 5900 Switch Series
HP 5920 & 5900 Switch Series MPLS Configuration Guide Part number: 5998-4676a Software version: Release 23xx Document version: 6W101-20150320 Legal and notice information Copyright 2015 Hewlett-Packard
!! Last configuration change at 16:04:19 UTC Tue Feb by zdrillin! NVRAM config last updated at 21:07:18 UTC Thu Feb ! version 12.
Last configuration change at 16:04:19 UTC Tue Feb 15 2011 by zdrillin NVRAM config last updated at 21:07:18 UTC Thu Feb 10 2011 version 12.2 no service pad service timestamps debug datetime msec service
CCIE Routing & Switching
CCIE Routing & Switching Cisco Certified Internetwork Expert Routing and Switching (CCIE Routing and Switching) certifies the skills required of expert-level network engineers to plan, operate and troubleshoot
Monitoring and Managing the Cisco MWR 2941 Router
CHAPTER 30 Monitoring and Managing the Cisco MWR 2941 Router The Cisco MWR 2941 supports a variety of network management features, including Mobile Wireless Transport Manager (MTWM), Cisco Active Network
MPLS Traffic Engineering (TE) MIB
MPLS Traffic Engineering (TE) MIB This document describes the Simple Network Management Protocol (SNMP) agent support in Cisco IOS for Multiprotocol Label Switching (MPLS) traffic engineering management,
MPLS applications can be upgraded using the In Service Software Upgrade (ISSU) process. Thus, MPLS
MPLS applications can be upgraded using the In Service Software Upgrade (ISSU) process. Thus, MPLS applications are considered ISSU s MPLS clients. The ISSU process allows Cisco IOS XE software to be updated
CA Spectrum. Standards-Based Protocol Reference Guide. Release 9.4
CA Spectrum Standards-Based Protocol Reference Guide Release 9.4 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation
Table of Contents. 1 Introduction 1-1 Related Manuals 1-1 Volume Introduction 1-1
Table of Contents 1 Introduction 1-1 Related Manuals 1-1 Volume Introduction 1-1 2 Description 2-1 Overview 2-1 Index 2-1 Description 2-2 Access Volume 2-3 IP Services Volume 2-4 IP Routing Volume 2-6
Quidway AR49 Series Routers Product Specification
Quidway AR49 Series Routers Product Specification Hardware Specification Item AR49-45 Number of Fixed Ethernet ports SIC/DSIC slot 2 GE Combo 4 SIC slots/ 2DSIC slots/ 2SIC+1DSIC slots FIC slot 4 ESM slot
Cisco CRS-3 16-Slot Single-Shelf System
Cisco CRS-3 16-Slot Single-Shelf System The Cisco CRS-3 Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity.
Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers Cisco IOS Software is continuously evolving to provide you with the features of higher quality. Cisco IOS Software
A Border Gateway Protocol 3 (BGP-3) DNS Extensions to Support IP version 6. Path MTU Discovery for IP version 6
IPv6 Standards and RFC 1195 Use of OSI IS-IS for Routing in TCP/IP and Dual Environments RFC 1267 A Border Gateway Protocol 3 (BGP-3) RFC 1305 Network Time Protocol (Version 3) Specification, Implementation
Alcatel-Lucent 7750 SR S E R V I C E R O U T E R R E L E A S E 5. 0
Alcatel-Lucent 7750 SR S E R V I C E R O U T E R R E L E A S E 5. 0 The Alcatel-Lucent 7750 Service Router, a superior multiservice edge router, gives service providers, cable MSO and enterprise customers
H3C SR8800-F Core Routers
H3C SR8800-F Core Routers DATA SHEET Product overview H3C SR8800-F Core Routers (hereinafter referred to as the SR8800-F routers), developed by Hangzhou H3C Technologies Co., Ltd., provide the following
H3C SR8800 Series 10G Core Routers SRPU Datasheet. Hangzhou H3C Technologies Co., Ltd.
H3C SR8800 Series 10G Core Routers SRPU Datasheet Hangzhou H3C Technologies Co., Ltd. H3C SR8800 Series 10G Core Routers SRPU Datasheet Table of Contents 1 Overview... 1 2 Features... 1 2.1 Powerful Routing
Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers Cisco IOS Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases
Exam4Tests. Latest exam questions & answers help you to pass IT exam test easily
Exam4Tests http://www.exam4tests.com Latest exam questions & answers help you to pass IT exam test easily Exam : 350-029 Title : CCIE SP Written Exam, V3.0 Vendor : Cisco Version : DEMO Get Latest & Valid
Configuring Embedded Resource Manager-MIB
The Embedded Resource Manager (ERM)-MIB feature introduces MIB support for the ERM feature. The ERM feature tracks resource usage information for every registered resource owner and resource user. The
Obtaining the New and Enhanced Device Drivers... 2 Which Jar File is a Device Using?... 2 New Support for Cisco Routers... 4
Addendum: Additional VNE Driver Support for Cisco Prime Network 5.1 Date: November 30, 2018 This is a companion document to Cisco Prime Network 5.1 Supported VNEs. It contains the following: Information
About the H3C S5130-EI configuration guides
About the H3C S5130-EI configuration guides The H3C S5130-EI configuration guides describe the software features for the H3C S5130-EI Switch Series, and guide you through the software configuration procedures.
HP 6125 Blade Switch Series
HP 6125 Blade Switch Series About the HP 6125 Blade Command s Part number: 5998-3163 Software version: Release 2103 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard
Cisco Catalyst 9500 Series Switches
Data Sheet Cisco Catalyst 9500 Series Switches Built for Security, IoT, and Cloud 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 36 Contents
Configure SNMP. Understand SNMP. This chapter explains Simple Network Management Protocol (SNMP) as implemented by Cisco NCS 4000 series.
This chapter explains Simple Network Management Protocol (SNMP) as implemented by Cisco NCS 4000 series. Understand SNMP, page 1 Basic SNMP Components, page 2 SNMPv3 Support, page 3 SNMP Traps, page 4
Quidway NetEngine 20E/20 Series Router Product Specification
Quidway NetEngine 20E/20 Series Router Product Specification Hardware Specifications NE20E-8 NE20-8 NE20-4 NE20-2 Dimensions(mm) 436.2 480 W x D x H 261 219.5 130.5 130.5 Weight 32.5kg 27.5Kg 17.5Kg 15Kg
Supported Standards. Class of Service Tagging for Ethernet frames. Multiple Spanning Tree Protocol. Rapid Spanning Tree Protocol
, page 1 This table lists the IEEE compliance standards. Table 1: IEEE Compliance s 802.1D MAC Bridges 802.1p Class of Service Tagging for Ethernet frames 802.1Q VLAN Tagging 802.1s Multiple Spanning Tree
Cisco Catalyst 9500 Series Switches
Data Sheet Cisco Catalyst 9500 Series Switches Built for Security, IoT, and Cloud The Cisco Catalyst 9500 Series switches are the next generation of enterprise-class core and aggregation layer switches,
Cisco Virtual Networking Solution for OpenStack
Data Sheet Cisco Virtual Networking Solution for OpenStack Product Overview Extend enterprise-class networking features to OpenStack cloud environments. A reliable virtual network infrastructure that provides
Configuring SNMP. Understanding SNMP CHAPTER
22 CHAPTER This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 3750 switch. Unless otherwise noted, the term switch refers to a standalone switch and a
Remote Access MPLS-VPNs
First Published: August 12, 2002 Last Updated: May 4, 2009 The feature allows the service provider to offer a scalable end-to-end Virtual Private Network (VPN) service to remote users. This feature integrates
Configuring SNMP. Understanding SNMP CHAPTER
22 CHAPTER Configuring SNMP This chapter describes how to configure the ML-Series card for operating with Simple Network Management Protocol (SNMP). Note For complete syntax and usage information for the
Configure Multipoint Layer 2 Services
This module provides the conceptual and configuration information for Multipoint Layer 2 Bridging Services, also called Virtual Private LAN Services (VPLS). Note VPLS supports Layer 2 VPN technology and
Configuring SNMP. Understanding SNMP CHAPTER
CHAPTER 28 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 2960 switch. For complete syntax and usage information for the commands used in this chapter,
Cisco IOS XE Software for NCS 4200 Series Network Convergence Systems
Data Sheet Cisco IOS XE Software for NCS 4200 Series Network Convergence Systems Cisco IOS Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases
Switch shall have 4 SFP 1000 Mb/s ports (2 Port dual-personality ports; 10/100/1000BASE-T or SFP and 2 Fixed 1G SFP port)
DELHI METRO RAIL CORPORATION LTD. (A joint venture of Govt. of India & Govt of Delhi) Metro Bhawan, 13, Fire Brigade Lane, Barakhamba Road, NEW DELHI-110001 Tel: 91-011-23417910-12 Extn: 34680 Fax: 91-011-23418413
IP Generic Training Programs. Catalog of Course Descriptions
IP Generic Training Programs Catalog of Course Descriptions Catalog of Course Descriptions INTRODUCTION... 4 BGP OVERVIEW & FUNDAMENTALS... 5 BNG FUNDAMENTALS... 8 BNG OVERVIEW... 10 DHCP-CLIPS FUNDAMENTALS...
Cisco 1-Gbps Wideband Shared Port Adapter for the Cisco ubr10012 Universal Broadband Router
Cisco 1-Gbps Wideband Shared Port Adapter for the Cisco ubr10012 Universal Broadband Router The Cisco 1-Gbps wideband shared port adapter (SPA) (Figure 1) for the Cisco ubr10012 Universal Broadband Router
Introduction to the Cisco ASR 9000 Series Aggregation Services Router
CHAPTER 1 Introduction to the Cisco ASR 9000 Series Aggregation Services Router This chapter introduces the routers that support Cisco IOS XR software. It also introduces router concepts, features, and
HUAWEI TECHNOLOGIES CO., LTD. NE40E Universal Service Router
HUAWEI TECHNOLOGIES CO., LTD. NE40E Universal Service Router NE40E Universal Service Router NE40E Universal Service Router 1 Introduction The NetEngine40E series universal service router (NE40E) is a high-end
Cisco MDS 9000 Family MIB Quick Reference
Text Part Number: September, 2007 This document describes the private, or local, Management Information Base (MIB) files for the Cisco MDS 9000 Family of multilayer directors and fabric switche s. The
H3C S9500 Series Routing Switches
Operation Manual Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Manual Version: T2-081655-20080530-C-2.03 Product Version: S9500-CMW520-R2132 Copyright 2007-2008, Hangzhou H3C Technologies Co.,
Configuring SNMP. Understanding SNMP CHAPTER
24 CHAPTER This chapter describes how to configure the the ML1000-2, ML100T-12, ML100X-8, and ML-MR-10 cards for operating with Simple Network Management Protocol (SNMP). Note For complete syntax and usage
Configuring SNMP CHAPTER. This chapter describes how to configure the Simple Network Management Protocol (SNMP) on your access point.
CHAPTER 18 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on your access point. Note For complete syntax and usage information for the commands used in this chapter,
IXANVL AUTOMATED NETWORK VALIDATION LIBRARY
IXANVL AUTOMATED NETWORK VALIDATION LIBRARY DATA SHEET Ixia's IxANVL (Automated Network Validation Library) is the industry standard for automated network/protocol validation. Developers and manufacturers
HP MSR Router Series. MPLS Configuration Guide(V5) Part number: Software version: CMW520-R2513 Document version: 6PW
HP MSR Router Series MPLS Configuration Guide(V5) Part number: 5998-8188 Software version: CMW520-R2513 Document version: 6PW106-20150808 Legal and notice information Copyright 2015 Hewlett-Packard Development
CCNA Routing & Switching
CCNA Routing & Switching 1.0 LAN Switching Technologies 1. VLANs,Trunk, DTP 2. VLANs, Trunks and DTP Configuration 3. Voice Vlan Configuration 4. VTP 5. VTP - Configuration 6. Spanning-tree 7. STP - PVST+
CONTENTS. Introduction
CONTENTS Introduction MP-1 Multiprotocol Label Switching Commands MP-3 address-family MP-4 affinity (LSP Attributes) MP-6 append-after MP-8 auto-bw (LSP Attributes) MP-9 bandwidth (LSP Attributes) MP-11
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: July 31, 2012 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
Cisco IOS XE Software for Cisco ASR 900U Series Aggregation Services Routers
Cisco IOS XE Software for Cisco ASR 900U Series Aggregation Services Routers Cisco IOS Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases provide
August Brocade NetIron. Feature Support, RFC Compliance, and IEEE Compliance Matrix. Supporting Multi-Service IronWare R05.9.
18 August 2015 Support, RFC Compliance, and IEEE Compliance Matrix Supporting Multi-Service IronWare R05.9.00 2015, Communications Systems, Inc. All Rights Reserved. ADX,, Assurance, the B-wing symbol,
Point-to-Multipoint MPLS-TE MIB
The point-to-multipoint (P2MP) Multiprotocol Label Switching (MPLS)-traffic engineering (TE) MIB describes the Label Switched Path (LSP) in an IP MPLS network. An administrator can use the P2MP MPLS-TE
3G/4G Multiservice Routers
SYSTROME SR-M2-08 Series 3G/4G Multiservice Routers SYSTROME SR-M2-08 Series Product Overview SYSTROME SR-M2 Series is the next-generation multiservice switching router platform developed by SYSTROME.
OcNOS Product Overview
OcNOS Data Sheet OcNOS Product Overview OcNOS is a networking solution built with traditional networking components along with components to transition to the new disruptive networking technologies. It
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: December 1, 2011 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
Multi Protocol Label Switching (an introduction) Karst Koymans. Thursday, March 12, 2015
.. MPLS Multi Protocol Label Switching (an introduction) Karst Koymans Informatics Institute University of Amsterdam (version 4.3, 2015/03/09 13:07:57) Thursday, March 12, 2015 Karst Koymans (UvA) MPLS
CCIE Service Provider Written Exam
400-201 CCIE Service Provider Written Exam NWExam.com SUCCESS GUIDE TO CISCO CERTIFICATION Exam Summary Syllabus Questions Table of Contents Introduction to 400-201 Exam on CCIE Service Provider Written
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: August 1, 2012 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
SNMP Server Commands
SNMP Server Commands This chapter describes the Cisco IOS XR software commands used to configure and monitor the Simple Network Management Protocol (SNMP) for network monitoring and management. For detailed
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS for the Cisco Catalyst 4503-E Switch and Cisco Catalyst 4503 Switch
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS for the Cisco Catalyst 4503-E Switch and Cisco Catalyst 4503 Switch Enterprise-Class Security and Reliability for the Medium-Sized Business Overview