Maintenance Checklists for Active Directory on a Cisco Unity System with Exchange as the Message Store
|
|
- Rodger Hunter
- 6 years ago
- Views:
Transcription
1 Maintenance Checklists for Active Directory on a Cisco Unity System with Exchange as the Message Store Published January 13, 2009 This document contains checklists for tasks required to ensure that the Cisco Unity system and Active Directory function together correctly. There are four checklists: tasks to do when a system is first installed, and when it is changed or upgraded; tasks to do every month; tasks to do every three months; and tasks to do every six months. Each checklist provides spaces for marking dates on which the tasks were completed. You can print the checklists, or if you use Adobe Acrobat, you can save a version of the PDF file and enter completion dates online in the editable fields. Note The checklists apply to any Cisco Unity system running version 4.0(5) or later. However, because this document was created after version 5.0(1) was released, the instructions referenced in some tasks may not be available in the Cisco Unity documentation for versions earlier than 5.x. Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA USA
2 2 Checklist New, Changed, or Upgraded System Table 1 Do On a New, Changed, or Upgraded System 1. Before installing a new Cisco Unity server (optional): Check the status and network connectivity of domain controllers and the servers that are assigned the Infrastructure Master, Relative ID Master, and PDC Emulator roles. Run the following Microsoft tools on the domain controllers with which the Cisco Unity system communicates in each domain that includes one or more Cisco Unity servers: DCDiag analyzes the state of domain controllers. Netdiag tests network connectivity. 2. After installing a new Cisco Unity server: Confirm that the Cisco Unity server is synchronizing data with Active Directory: a. In Active Directory, create as many test users as you have Cisco Unity servers. b. Log on to each of the Cisco Unity servers, and create one Cisco Unity subscriber by importing a different test user from the ones that you created in Task a. Give each test user a valid extension. c. Allow enough time for the data to replicate to each of the Cisco Unity servers. If all of the Cisco Unity servers are in the same site, replication should complete within a half hour. If the Cisco Unity servers are in multiple sites, the amount of time required for replication to complete depends on the intersite replication schedule. d. In the Cisco Unity Administrator, confirm that you can see subscribers on other servers. e. In Active Directory, delete all of the test users. f. Allow enough time for the deletions to replicate to each of the Cisco Unity servers. If all of the Cisco Unity servers are in the same site, replication should complete within a half hour. If the Cisco Unity servers are in multiple sites, the amount of time required for replication to complete depends on the intersite replication schedule. Checklist New, Changed, or Upgraded System g. Confirm that the corresponding Cisco Unity subscribers no longer appear in the Cisco Unity Administrator. 3. Confirm that the Cisco Unity installation and service accounts and other Cisco Unity-specific accounts in Active Directory exist and that they are enabled, if required. For more information, see the Securing Accounts chapter of the applicable Security Guide for Cisco Unity (With Microsoft Exchange) at
3 3 Checklist Every Month Table 2 Do Every Month 1. On the Cisco Unity server, run the Permissions wizard in Report mode to confirm that the Cisco Unity installation, directory services, and message store services accounts still have the permissions required to function properly. See the Help file Permissions Wizard Report Mode Help for the applicable version of the wizard, available at 2. Check the following servers for event log errors and warnings: The current domain controller for each Cisco Unity server. The current global catalog server for each Cisco Unity server. In each domain that includes one or more Cisco Unity servers, the servers that are assigned the Infrastructure Master, Relative ID Master, and PDC Emulator roles. We recommend that you begin by initially monitoring all errors and warnings in the Event log. As you gain experience reviewing the events, you can filter out those that are not a cause for concern in your environment. 3. Optional: Check the status and network connectivity of domain controllers and the servers that are assigned the Infrastructure Master, Relative ID Master, and PDC Emulator roles. Run the following Microsoft tools on the domain controllers with which the Cisco Unity system communicates in each domain that includes one or more Cisco Unity servers: DCDiag analyzes the state of domain controllers. Netdiag tests network connectivity. Checklist Every Month
4 4 Checklist Every Three Months Table 3 Do Every Three Months 1. Confirm that the Cisco Unity server can access all domain controllers and global catalog servers in the site: a. Log on to the Cisco Unity server, and run the DC/GC Reconnect Settings tool. b. On the Domain Controller tab, if the Enable Automatic Server Search Functionality on Reconnects for This Domain check box is selected, write down the name of the server that is listed in the Manual Primary Domain Controller field, and clear the check box. c. In the Manual Primary Domain Controller field, enter the name of one of the domain controllers in the Active Directory site in which this Cisco Unity server resides. d. Click Test. e. If the test fails for the specified domain controller, find and resolve the problem. f. When the test succeeds, repeat Task c. through Task e. for every domain controller in the Active Directory site. g. After you have checked the last domain controller, if the Enable Automatic Server Search Functionality on Reconnects for This Domain check box was selected when you started the tool, select it again. If the check box was not selected, in the Manual Primary Domain Controller field, enter the name of the server that you wrote down in Task b. h. On the Global Catalog tab, if the Enable Automatic Server Search on Reconnect check box is selected, write down the name of the server that is listed in the Manual Global Catalog Server Primary field, and clear the check box. i. In the Manual Global Catalog Server Primary field, enter the name of one of the global catalog servers in the Active Directory site in which this Cisco Unity server resides. j. Click Test. k. If the test fails for the specified global catalog server, find and resolve the problem. l. When the test succeeds, repeat Task i. through Task k. for every global catalog server in the Active Directory site. m. After you have checked the last global catalog server, if the Enable Automatic Server Search on Reconnect check box was selected when you started the tool, select it again. Checklist Every Three Months If the check box was not selected, in the Manual Global Catalog Server Primary field, enter the name of the server that you wrote down in Task h. n. Repeat Task a. through Task m. on one Cisco Unity server in every Active Directory site that includes a Cisco Unity server.
5 Table 3 Do Every Three Months (continued) 5 2. Confirm that the Cisco Unity server is synchronizing data with Active Directory. For more information, see Task 2. in Table Confirm that the Cisco Unity installation and service accounts and other Cisco Unity-specific accounts in Active Directory exist and that they are enabled, if required. For more information, see the Securing Accounts chapter of the applicable Security Guide for Cisco Unity (With Microsoft Exchange) at Checklist Every Three Months
6 6 Checklist Every Six Months Table 4 Do Every Six Months 1. Verify the DNS configuration. On each of the domain controllers and global catalog servers with which each Cisco Unity server communicates: a. Run ipconfig /flushdns to flush and reset the contents of the DNS client resolver cache. b. Do the checks that are discussed in the Microsoft TechNet topic Verifying Your Basic DNS Configuration. The article is in the Windows 2000 Server Resource Kit, but the information applies to all versions of Windows. On each Cisco Unity server: c. Run ipconfig /flushdns to flush and reset the contents of the DNS client resolver cache. d. Do the procedure in the Microsoft TechNet topic Verify DNS registration for domain controllers using the nslookup command. The article is in the Windows Server 2003 Technical Library, but the information applies to all versions of Windows. 2. Optional: In each domain that includes one or more Cisco Unity servers, confirm that the following FSMO roles are assigned: Infrastructure Master. The server with this role should not be a global catalog server unless all domain controllers are also global catalog servers. Relative ID Master PDC Emulator Checklist Every Six Months
7 Cisco Unity Documentation Cisco Unity Documentation For descriptions and URLs of Cisco Unity documentation on Cisco.com, see the Documentation Guide for Cisco Unity. The document is shipped with Cisco Unity and is available at ml. Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: Subscribe to the What s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iphone, iquick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R) Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental Cisco Systems, Inc. All rights reserved. 7
8 Cisco Unity Documentation 8
Maintenance Checklists for Microsoft Exchange on a Cisco Unity System
Maintenance Checklists for Microsoft Exchange on a Cisco Unity System Published January 13, 2009 This document contains checklists for tasks required to ensure that the Cisco Unity system and Microsoft
More informationRelease Notes for Cisco ONS MA Release 9.01
Release Notes for Cisco ONS 15310-MA Release 9.01 Revised: July 2009, Release notes contain the new features and enhancements for the Cisco ONS 15310-MA platform. For detailed information regarding features,
More informationRelease Notes for Cisco ONS SDH Release 9.01
Release Notes for Cisco ONS 15454 SDH Release 9.01 Revised: July 2009, Release notes contain the new features and enhancements for the Cisco ONS 15454 SDH platform. For detailed information regarding features,
More informationRelease Notes for Catalyst 6500 Series and Cisco 7600 Series Internet Router CEF720 Module ROMMON Software
Release Notes for Catalyst 6500 Series and Cisco 7600 Series Internet Router CEF720 Module ROMMON Software Current Release: 12.2(18r)S1 May 28, 2004 This publication describes how to upgrade the ROMMON
More informationUsing Microsoft Outlook to Schedule and Join Cisco Unified MeetingPlace Express Meetings
Using Microsoft Outlook to Schedule and Join Cisco Unified MeetingPlace Express Meetings Cisco Unified MeetingPlace Express Release 2.x contains a plug-in that allows you to schedule, attend, and manage
More informationProtected URL Database
Revised: October, 2008, Contents Managing URL Blacklists Using the SCE 1 Configuring User Authorization 2 How to specify a new owner of the sce-url-database 2 How to configure the sce-url-database write-protection
More informationRAID Controller Firmware Upgrade Instructions for the Cisco WAE-7341, 7371, and 674
RAID Controller Firmware Upgrade Instructions for the Cisco WAE-7341, 7371, and 674 Revised: September 15, 2008, This document describes how to upgrade the RAID controller firmware in a Cisco Wide Area
More informationCisco Software Licensing Information for Cisco Unified Communications 500 Series for Small Business
Cisco Software Licensing Information for Cisco Unified Communications 500 Series for Small Business Feb. 06, 2008, This document describes the Cisco Software Licensing (CSL) information for the Cisco Unified
More informationContextual Configuration Diff Utility
Contextual Configuration Diff Utility First Published: November 2003 Last Updated: May 2, 2008 The Contextual Configuration Diff Utility feature provides the ability to perform a line-by-line comparison
More informationExclusive Configuration Change Access and Access Session Locking
Exclusive Configuration Change Access and Access Session Locking First Published: February 28, 2005 Last Updated: May 4, 2009 Exclusive Configuration Change Access (also called the Configuration Lock feature)
More informationConnecting Cisco DSU/CSU High-Speed WAN Interface Cards
Connecting Cisco DSU/CSU High-Speed WAN Interface Cards Revised: April 15, 2008, Overview This document describes Cisco serial and DSU/CSU high-speed WAN interface cards (HWICs) and how to connect them
More informationConfiguring an Intermediate IP Multicast Helper Between Broadcast-Only Networks
Configuring an Intermediate IP Multicast Helper Between Broadcast-Only Networks First Published: February 11, 2008 Last Updated: February 11, 2008 When a multicast-capable internetwork is between two subnets
More informationInstalling IEC Rack Mounting Brackets on the ONS SDH Shelf Assembly
Installing IEC Rack Mounting Brackets on the ONS 15454 SDH Shelf Assembly Product Name: 15454E-19IEC-KIT= This document provides installation procedures for installing mounting brackets on the ONS 15454
More informationConnecting Cisco 4-Port FXS/DID Voice Interface Cards
Connecting Cisco 4-Port FXS/DID Voice Interface Cards Revised: April 15, 2008, OL-15695-01 Overview This document provides an overview of Cisco interface cards and explains how to install the Cisco 4-port
More informationInstalling the RJ-45 Bracket and Cable on the Cisco ONS Rack
Installing the RJ-45 Bracket and Cable on the Cisco ONS 15454 Rack This document describes how to install the optional RJ-45 bracket and cable on the Cisco ONS 15454 equipment rack. This kit, included
More informationCisco Aironet Very Short 5-GHz Omnidirectional Antenna (AIR-ANT5135SDW-R)
Cisco Aironet Very Short 5-GHz Omnidirectional Antenna (AIR-ANT5135SDW-R) This document outlines the specifications for the Cisco Aironet Very Short 5-GHz Omnidirectional Antenna (AIR-ANT5135SDW-R) and
More informationThe CVD program consists of systems and solutions designed, tested, and documented to facilitate faster, more reliable, and more predictable customer
The CVD program consists of systems and solutions designed, tested, and documented to facilitate faster, more reliable, and more predictable customer deployments. For more information, visit: http://www.cisco.com/go/designzone.
More information7825-I4, 7828-I4 Hard Disk Firmware Update
7825-I4, 7828-I4 Hard Disk Firmware Update October 6, 2010 Document Revision 2 A firmware solution for a hard disk drive issue on the MCS 7825-I4, and 7828-I4 models Contents This document discuss the
More informationCisco Unified Attendant Console Backup and Restore Guide
Cisco Unified Attendant Console Backup and Restore Guide Revised: May 30, 2013, 2011, This document describes how to back up Cisco Unified Attendant Console server Version 9.1 (all Editions), and restore
More informationRelease Notes for Cisco Unified Attendant Console Standard Release
Release Notes for Cisco Unified Attendant Console Standard Release 10.0.1.1208 First Published: January 9, 2014, 2011, These release notes describe the new features and caveats for Cisco Unified Attendant
More informationCisco Virtual Office End User Instructions for Cisco 1811 Router Set Up at Home or Small Office
Cisco Virtual Office End User Instructions for Cisco 1811 Router Set Up at Home or Small Office Introduction This document describes the end-user instructions to deploy the Cisco Virtual Office (CVO) for
More informationRelease Notes for Cisco Service Control Management Suite Collection Manager (SCMS CM) 3.1.6
Release s for Cisco Service Control Management Suite Collection Manager (SCMS CM) 3.1.6 Covers: SCMS CM 3.1.6, SCMS CM 3.1.5, SCMS CM 3.1.0 February 14, 2009 Introduction, page 1 Release SCMS CM 3.1.6,
More informationCisco Video Surveillance Virtual Matrix Client Configuration Guide
Cisco Video Surveillance Virtual Matrix Client Configuration Guide Release 6.2 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408
More information1 Obtaining Cisco ANA NSA 1.0 Patch 1
Readme File for the Cisco ANA NSA 1.0 Patch 1 This readme file supports the release of Cisco Active Network Abstraction Network Service Activation (Cisco ANA NSA) 1.0, Patch 1. The patch is installed on
More informationRelease Notes for Cisco Small Business Pro ESW 500 Series Switches
Release Notes for Cisco Small Business Pro ESW 500 Series Switches October, 2009 These Release Notes describe the recommended practices and known issues that apply to the ESW 500 Series of Switches for
More informationCisco Unified Web and Interaction Manager Browser Settings Guide
Cisco Unified Web and E-Mail Interaction Manager Browser Settings Guide For Unified Contact Center Enterprise and Hosted and Unified ICM Release 4.3(1) September 2009 Americas Headquarters Cisco Systems,
More informationCisco Redundant Power System 2300 Compatibility Matrix
Cisco Redundant Power System 2300 Compatibility Matrix November 2008 This document contains the list of Cisco products that are compatible with the Cisco Redundant Power System 2300 (RPS 2300). Table 1
More informationMaintenance Checklists for Cisco Unity VPIM Networking (with Microsoft Exchange)
Maintenance Checklists for Cisco Unity VPIM Networking (with Microsoft Exchange) Published December 10, 2007 This document contains checklists for tasks required to ensure that Cisco Unity VPIM Networking
More informationConnecting Cisco WLAN Controller Enhanced Network Modules to the Network
Connecting Cisco WLAN Controller Enhanced Network Modules to the Network Revised: May 1, 2008, OL-16632-01 This guide describes how to connect Cisco wireless LAN (WLAN) controller enhanced network modules
More informationRAID Battery Backup Unit Replacement and RAID Firmware Upgrade for Cisco Security MARS
RAID Battery Backup Unit Replacement and RAID Firmware Upgrade for Cisco Security MARS Published: August 20, 2009 This document ships with the Cisco Security MARS RAID Controller Back-Up Battery Unit (BBU),
More informationCisco WAAS Mobile User Guide
Cisco WAAS Mobile User Guide Software Version 3.5 April 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS
More informationCisco BTS Softswitch Turkish ISUP Feature Module
Cisco BTS 10200 Softswitch Turkish ISUP Feature Module Revised: July 31, 2008 This document describes the Turkish ISUP feature for of the Cisco BTS 10200 Softswitch and explains how to use this feature.
More informationATM VP Average Traffic Rate
First Published: April, 2008 This document describes the feature. Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented in this module.
More informationRelease Notes for SPA942 and SPA962 IP Phones Firmware Version 6.1.3
Release Notes for SPA942 and SPA962 IP Phones Firmware Version 6.1.3 September 2008 These Release Notes describe the new features and enhancements in the SPA942 and SPA962 firmware version 6.1.3. Contents
More informationConfiguration Replace and Configuration Rollback
Configuration Replace and Configuration Rollback First Published: March 3, 2004 Last Updated: May 4, 2009 The Configuration Replace and Configuration Rollback feature provides the capability to replace
More informationModified LNS Dead-Cache Handling
First Published: Sept. 30, 2007 Last Updated: Aug. 28, 2008 The feature allows you to display and clear (restart) any Layer 2 Tunnel Protocol (L2TP) Network Server (LNS) entry in a dead-cache (DOWN) state.
More informationCisco Unified Web and Interaction Manager Browser Settings Guide
Cisco Unified Web and E-Mail Interaction Manager Browser Settings Guide For Unified Contact Center Enterprise and Hosted and Unified ICM Release 4.2(5) October 2008 Americas Headquarters Cisco Systems,
More informationBehavioral Change for Buffer Recarving
Part Number: OL-18534-01 First Published: December 8, 2008 Table 1 Feature History Cisco IOS Release 12.0(32.03)S03, 12.0(32)S08, 12.0(32)SY04 12.0(32)SY07, 12.0(32)S06c 12.0(32)SY07, 12.0(32)S06c, and
More informationRelease Notes for Cisco Broadband Access Center 3.5
Release Notes for Cisco Broadband Access Center 3.5 Revised: June 15, 2009, These release notes describe new software features, bug fixes, and documentation for Cisco Broadband Access Center (Cisco BAC),
More informationRelease Notes for TimeCardView 7.0.x
First published: January 26, 2009, Revised: August 7, 2009 Contents Introduction, page 1 System Requirements, page 2 Files Included in TimeCardView 7.0.x, page 4 Caveats, page 5 Additional References,
More informationLogging to Local Nonvolatile Storage (ATA Disk)
Logging to Local Nonvolatile Storage (ATA Disk) First Published: August 26, 2003 Last Updated: June 28, 2007 The Logging to Local Nonvolatile Storage (ATA Disk) feature enables system logging messages
More informationConfiguring the WIP310 Wireless-G IP Phone with the SPA9000 Voice System
Configuring the WIP310 Wireless-G IP Phone with the SPA9000 Voice System Contents Introduction 2 Audience 2 Scope 2 Related Documents 3 Overview 3 2008 Cisco Systems, Inc. All rights reserved. This document
More informationCisco 806, Cisco 820 Series, Cisco 830 Series, SOHO 70 Series and SOHO 90 Series Routers ROM Monitor Download Procedures
Cisco 806, Cisco 820 Series, Cisco 830 Series, SOHO 70 Series and SOHO 90 Series Routers ROM Monitor Download Procedures November 18, 2004 This document contains procedures for downloading ROM Monitor
More informationCisco Service Control Service Security: Outgoing Spam Mitigation
CISCO SERVICE CONTROL SOLUTION GUIDE Cisco Service Control Service Security: Outgoing Spam Mitigation Solution Guide, Release 3.5.5 1 Introduction and Scope 2 Functionality Overview 3 Mass-Mailing Based
More informationVPDN LNS Address Checking
First Published: Sept. 30, 2007 Last Updated: Aug. 28, 2008 The feature allows a Layer 2 Tunnel Protocol (L2TP) Access Concentrator (LAC), that is receiving data from an L2TP Network Server (LNS) to check
More informationWireless-G IP Phone QUICK INSTALLATION GUIDE. Package Contents
QUICK INSTALLATION GUIDE Wireless-G IP Phone Model: WIP310 Package Contents Handset Phone Charger Power Adapter Li-ion Battery USB Cable Quick Installation Guide Read Me First Card 1 Installation A. Insert
More informationRelease Notes for Cisco Video Surveillance Manager 4.1/6.1
Release Notes for Cisco Video Surveillance Manager 4.1/6.1 February, 2009 These release notes provide important information for the following Cisco Video Surveillance Manager (Cisco VSM) products: Cisco
More informationUser Guide for Microsoft Outlook Plug-in for Cisco Unified Videoconferencing Manager Release 7.1
User Guide for Microsoft Outlook Plug-in for Cisco Unified Videoconferencing Manager Release 7.1 March 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationRelease Notes for Click to Call Release 7.x
Revised: November 27, 2009 These release notes describe all versions of Click to Call Release 7.x. To access the latest software upgrades for all versions of Click to Call, go to http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml
More informationInstalling the Cisco ONS Deep Door Kit
Product Number: 15454-DOOR-KIT This document describes how to install the deep door kit for the Cisco ONS 15454. A door is pre-installed on the ONS 15454 but the 15454-DOOR-KIT provides a deeper door and
More informationCisco PGW 2200 Softswitch Generic Call Tagging Feature Module
Cisco PGW 2200 Softswitch Feature Module Document Release History Publication Date August 28, 2009 Comments Initial release of document. Feature History Release Modification 9.8(1) S5P5 The feature was
More informationRelease Notes for Cisco Unified Attendant Console Compact Edition Version
Release Notes for Cisco Unified Attendant Console Compact Edition Version 8.6.4.1106 Revised: July 3, 2012, These release notes describe the new features and caveats for Cisco Unified Attendant Console
More informationCisco BTS Softswitch Site Preparation and Network Communications Requirements, Release 6.0. Safety and Compliance
Cisco BTS 10200 Softswitch Site Preparation and Network Communications Requirements, Release 6.0.x This document explains the requirements for site preparation and network communications. Use this document
More informationRelease Notes for Cisco MDS 9000 Family Fabric Manager Release 4.1(3b)
Release Notes for Cisco MDS 9000 Family Fabric Manager Release 4.1(3b) Release Date: June 1, 2009 Part Number: This document describes the new features, limitations, and caveats for Cisco MDS 9000 Family
More informationCisco Registered Envelope Recipient Guide
September 8, 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number:
More informationCisco Unity Express Voic System User s Guide
Cisco Unity Express Voice-Mail System User s Guide Release 2.1 This guide provides information about some advanced voice-mail features of your Cisco Unity Express voice-mail system. Use this guide together
More informationRelease Notes for SPA9000 Voice System
Release Notes for SPA9000 Voice System Firmware Version 6.1 September 2008 These Release Notes describe the new features and enhancements in the SPA9000 Voice System firmware release for SPA9000, SPA400,
More informationCisco Unified Web and Interaction Manager Supervision Console User s Guide
Cisco Unified Web and E-Mail Interaction Manager Supervision Console User s Guide For Unified Contact Center Enterprise and Hosted and Unified ICM Release 4.2(5) October 2008 Americas Headquarters Cisco
More informationIP SLAs Proactive Threshold Monitoring
IP SLAs Proactive Threshold Monitoring First Published: May 2, 2005 Last Updated: July 18, 2008 This document describes the proactive monitoring capabilities of Cisco IOS IP Service Level Agreements (SLAs)
More informationCisco Aironet Directional Antenna (AIR-ANT-SE-WiFi-D)
Cisco Aironet Directional Antenna (AIR-ANT-SE-WiFi-D) This document describes the Cisco Directional Antenna (AIR-ANT-SE-WiFi-D) and provides instructions for mounting it. The antenna operates in the 2.4-GHz
More informationUpgrading to the Cisco ASR 1000 Series Routers ROMmon Image Release 12.2(33r)XNC
Upgrading to the Cisco ASR 1000 Series Routers ROMmon Image Release 12.2(33r)XNC Published: October 23, 2009 This document contains procedures for downloading independent ROM monitor (ROMmon) software
More informationPPPoE Agent Remote-ID and DSL Line Characteristics Enhancement
PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement First Published: December 4, 2006 Last Updated: October 2, 2009 The PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement feature
More informationRelease Notes for Cisco Aironet a/b/g Client Adapters (CB21AG and PI21AG) for Windows Vista 1.0
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) for Windows Vista 1.0 Contents This document contains the following sections: Introduction, page 2 System Requirements, page
More informationConfiguring ISG VRF Transfer (Cisco IOS Release 12.2(28)SB)
Configuring ISG VRF Transfer (Cisco IOS Release 12.2(28)SB) First Published: March 20, 2006 Last Updated: June 25, 2009 Intelligent Services Gateway (ISG) is a Cisco IOS software feature set that provides
More informationInstalling and Configuring the Microsoft Outlook Client Plug-in for Cisco Unified Videoconferencing Manager Release 7.1
INTEGRATION NOTE Installing and Configuring the Microsoft Outlook Client Plug-in for Cisco Unified Videoconferencing Manager Release 7.1 Revised: March 31, 2010, OL-22091-01 1 Overview 2 Prerequisites
More informationBGP Enforce the First Autonomous System Path
BGP Enforce the First Autonomous System Path The BGP Enforce the First Autonomous System Path feature is used to configure a Border Gateway Protocol (BGP) routing process to discard updates received from
More informationPPPoE Agent Remote-ID and DSL Line Characteristics Enhancement
PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement First Published: December 5, 2006 Revised: August 29, 2008 The PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement feature provides
More informationConfiguring LDAP. Finding Feature Information. Contents
Configuring LDAP First Published: March 19, 2010 Last Updated: March 19, 2010 Lightweight Directory Access Protocol (LDAP) is integrated into Cisco IOS software as a AAA protocol alongside the existing
More informationCisco Smart Business Communications System Teleworker Set Up
Cisco Smart Business Communications System Teleworker Set Up The Cisco Smart Business Communications System is a unified communications solution for small businesses that provides voice, data, video, security,
More informationIS-IS Incremental SPF
IS-IS Incremental SPF Integrated Intermediate System-to-Intermediate System (IS-IS) can be configured to use an incremental SPF algorithm for calculating the shortest path first routes. Incremental SPF
More informationDHCP Lease Limit per ATM/RBE Unnumbered Interface
DHCP Lease Limit per ATM/RBE Unnumbered Interface The DHCP Lease Limit per ATM/RBE Unnumbered Interface feature limits the number of Dynamic Host Configuration Protocol (DHCP) leases per subinterface offered
More informationOSPF Incremental SPF
OSPF Incremental SPF The Open Shortest Path First (OSPF) protocol can be configured to use an incremental SPF algorithm for calculating the shortest path first routes. Incremental SPF is more efficient
More informationGeneric Routing Encapsulation Tunnel IP Source and Destination VRF Membership
Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership Last Updated: April, 2007 The feature allows you to configure the source and destination of a tunnel to belong to any virtual
More informationCisco Report Server Readme
Cisco Report Server Readme For Cisco Network Planning Solution 2.1, Cisco Network Planning Solution Service Provider 2.1, and Cisco Application Analysis Solution 2.1 Release 2.1 Americas Headquarters Cisco
More informationCisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide
Send feedback to nexus4k-docfeedback@cisco.com Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide This document includes the following sections: Overview, page 1 Safety
More informationLAN Emulation Overview
LAN Emulation Overview This overview chapter gives a high-level description of LAN Emulation (LANE). Procedures for configuring LANE are provided in the following chapters in this publication: Configuring
More informationSecurity Best Practices Supplement for Cisco Digital Media Encoders
Security Best Practices Supplement for Cisco Digital Media Encoders Published: November 10, 2009 Revised: November 10, 2009 This supplement describes our recommendations about how to establish and maintain
More informationIP SLAs Random Scheduler
First Published: February 27, 2007 Last Updated: February 27, 2007 The feature is an enhancement to the existing IP SLAs Multiple Operation Scheduling feature. The IP SLAs Multiple Operation Scheduling
More informationWhite Paper: Using Microsoft Windows Server 2003 with Cisco Unity 4.0(4)
White Paper: Using Microsoft Windows Server 2003 with Cisco Unity 4.0(4) Revised July 30, 2004 This white paper explains the differences between installing Cisco Unity version 4.0(4) on a server running
More informationCisco Software Activation Document for IBM
April 23, 2008 This document describes the Cisco software activation process for the Cisco Catalyst Switch Module 3110 for IBM BladeCenter, hereafter referred to as the switch. Note You cannot use the
More informationConfiguring Token Ring LAN Emulation for Multiprotocol over ATM
Configuring Token Ring LAN Emulation for Multiprotocol over ATM This chapter describes the required and optional tasks for configuring the MPOA for Token Ring Networks feature. For a complete description
More informationInstallation Notes for Catalyst 3750-E and Catalyst 3560-E Switch Fan Modules
Installation Notes for Catalyst 3750-E and Catalyst 3560-E Switch Fan Modules This document provides the removal and installation procedure for the fan module used with the Catalyst 3750-E and Catalyst
More informationConnecting Cisco Digital Modem Network Modules to the Network
Connecting Cisco Digital Modem Network Modules to the Network Revised: May 1, 2008, OL-12813-01 This guide describes how to connect Cisco digital modem network modules to your network. It contains the
More informationSuppress BGP Advertisement for Inactive Routes
Suppress BGP Advertisement for Inactive Routes The Suppress BGP Advertisements for Inactive Routes features allows you to configure the suppression of advertisements for routes that are not installed in
More informationInstalling and Configuring the Lotus Notes Plug-in for Cisco Unified Videoconferencing Manager Release 7.1
INTEGRATION NOTE Installing and Configuring the Lotus Notes Plug-in for Cisco Unified Videoconferencing Manager Release 7.1 Revised: March 19, 2010, OL-22093-01 1 Overview 2 Lotus Domino User Interface
More informationPer IP Subscriber DHCP Triggered RADIUS Accounting
Per IP Subscriber DHCP Triggered RADIUS First Published: February 19, 2007 Last Updated: February 19, 2007 The Per IP Subscriber DHCP Triggered RADIUS feature enables system administrators to track IP
More informationPPPoE Session Recovery After Reload
If the PPP keepalive mechanism is disabled on a customer premises equipment (CPE) device, a PPP over Ethernet (PPPoE) session will hang indefinitely after an aggregation device reload. The PPPoE Session
More informationCisco IP Phone Agent User Guide
CAD 7.6 for Cisco Unified Contact Center Enterprise Release 7.5 May 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000
More informationDHCP Option 82 Support for Routed Bridge Encapsulation
DHCP Option 82 Support for Routed Bridge Encapsulation Feature History for the Feature Release Modification 12.2(2)T This feature was introduced. 12.2(27)SBA This feature was integrated into Cisco IOS
More informationRelease Notes for Cisco High-Performance Subnet Manager (HSM) Release 1.3
Release Notes for Cisco High-Performance Subnet Manager (HSM) Release 1.3 Release Date: March 17, 2009 Contents This document contains the following sections: Contents, page 1 Introduction, page 1 System
More informationRelease Note for the Cisco WAAS Mobile
July 30, 2008 Note The most current Cisco documentation for released products is available on Cisco.com. Contents This release note applies to software version 3.4.0 for the Cisco Wide Area Application
More informationISSU and SSO DHCP High Availability Features
ISSU and SSO DHCP High Availability Features First Published: December 4, 2006 Last Updated: February 19, 2007 Cisco IOS Release 12.2(31)SB2 introduces the following series of Dynamic Host Configuration
More informationCisco Aironet 1500 Series Access Point Large Pole Mounting Kit Instructions
Cisco Aironet 500 Series Access Point Large Pole Mounting Kit Instructions This document provides instructions for mounting the Cisco Aironet 500 series on a telephone, power, or street lamp pole using
More informationOnline Bank Secures Future Leadership
EXECUTIVE SUMMARY Customer Name ING Romania Industry Financial Services Location Romania Company Size 700 employees Challenge Provide customers with seamless access to online bank applications Accommodate
More informationSSG Service Profile Caching
SSG Service Profile Caching The SSG Service Profile Caching feature enhances the authentication process for Service Selection Gateway services by allowing users to authenticate a service using the service
More informationCisco Unified Mobile Communicator 3.0 User Portal Guide
Cisco Unified Mobile Communicator 3.0 User Portal Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
More informationFIPS Security Policy for Cisco Aironet Lightweight AP1131, AP1142, AP1242, AP1252, and AP1522 Wireless LAN Access Points
FIPS 140-2 Security Policy for Cisco Aironet Lightweight AP1131, AP1142, AP1242, AP1252, and AP1522 Wireless LAN Access Points August 25, 2009 Version 1.7 Contents This security policy contains these sections:
More informationADMINISTRATION GUIDE Cisco Small Business
ADMINISTRATION GUIDE Cisco Small Business Cisco ProtectLink Endpoint 1.0 CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect,
More informationIMA Dynamic Bandwidth
IMA Dynamic Bandwidth The IMA Dynamic Bandwidth feature introduces the ability to configure Cisco IOS software to automatically manage changes in the total bandwidth of an Asynchronous Transfer Mode (ATM)
More informationCisco Unified MeetingPlace for Microsoft Office Communicator
QUICK START GUIDE Cisco Unified MeetingPlace for Microsoft Office Communicator Release 6.x Published May 31, 2007 1 Configuring Your Office Communicator Client for Cisco Unified MeetingPlace Conferencing
More information