ERC GmbH. Notified Body Interoperability (Subsystem vehicle) ECM Certification Body Independent Safety Assessment
|
|
- Liliana Hodges
- 6 years ago
- Views:
Transcription
1 ERC GmbH Notified Body Interoperability (Subsystem vehicle) ECM Certification Body Independent Safety Assessment
2 5 years ECM certification Experience of a certificatin body and the sector VPI Workshops ERA Accreditation body Die ECMs Geprüften ECM certification body
3 The world seen with the eyes of an ECM Workshop Railway undertaking Certification bodies Dealers Supliers Entity in Charge of Maintenance ECM Associations VPI, NoBo TSI NSAs ERA
4 Offer services Management (I) Satisfaction Structure and responsibility (I.5) Policy (I.1.a) Safety targets (I.1.b) PLAN ACT Assessment of safety (I.1.c) Planning (I.1.d) Audit system (I.4.c) Riskmanagement (I.2) DO CHECK Monitoring (I.3) Requirements Expectations Competence management (I.6) Damage statistics (I.3.2) Services Development (II) Fleet Management (III) Workshop (IV) Dr. Wirnsperger Information (I.7) Documentation (I.8) Subcontracting (I.9)
5 ECM and the others MoU until National ECM Regulations until , (Art. 12.4) National workshop certifications until (Art. 12.5) RU: Safety certificate replaces ECM for the time of ist validity (Art. 12.7) MoU new EU 445 MoU valid EU 445 National ECM Regulation National workshop cert. RU Safety Certificate valid
6 Number of certificates MoU certificates ECM certificates (incl. amendments etc.) ECM ECM 69 F4 42 Other
7 Status of certificates Standard duration: 5 years < 5 years: special circumstances Newcomer: 1 year 300 ECM 250 F New Renewed Amended Revoked Suspended Data provided by ERA(September 2016)
8 Valid certificates F2/3 Workshop ECM ECM Workshop Development, Fleet Management
9 Safety targets Work in progress 1) 2) 3) 4) We want We want to become safer Definition Documentation Monitoring Action PLAN DO ACT CHECK
10 I 1.b/c/d Safety targets An idea Product Employees System Incidents Components Wheel Axle Brake Work on Wheelset Tank Results Derailment Hot axle box Evaluation of workplace Office Inspection Workshop Equipment Standstill days Deadlines for maintenance Type Property Persons Quantity Number Percent Costs /km
11 Continuous Improvement Safety targets Goals Damage analysis Look back Risk assessment Future 11
12 Information safe wagons Everybody wants information nobody wants to share it Customer VPI ECM F2 Workshop Keeper ECM F3 ECM Certification body (ECM, ISO, NoBo, ) Railway undertaking NSA Producer
13 Mileage The great unknown RU RUs don t deliver data Technically possible? AVV Art. 15.2, ECM Art. 5 (4), I 7.4.e 1 ECM receives data from RU
14 Mileage 2 Wagons go A B A A B
15 Mileage 3 Renting
16
17
18 Mileage Here I go again
19 X Mileage The problem? ECM Keeper Renter Logistics RU IM Track is known Data provided by RU RSRD² Mileage counter on the wagon Timely xxxxx xxxx xxx xxxxx Reliable Precise
20 Mileage Precision? ECM I roughly know it Certification body Be reasonable RISK State attorney???
21 IV 10.e Calibration Measure it precisely What needs calibration and what not? Identification Calibration intervals? In-house calibration? 10. When the documentation process is applied to the maintenance delivery function, at least the following elements must be recorded: (e) the validity of the previous measuring results when a measuring instrument is found not to conform to requirements.
22 Welding Crucial for maintenance level (3), 4, 5 Non Destructive Testing Certification systems exists Certification bodies rely on Welding: EN (and EN ISO 3834) NSA RID welding acceptance NDT: EN ISO 9712 ERA 22 Budapest,
23 Summary Positive One system in EU OTIF joined 445 is clever Good to use in practice Negative Accreditation, Recognition, NSA Application not the same all over Europe
24 Thank you for your attention DI CEO Brückenkopfgasse Waagner Biro Strasse 1/1/ Graz Austria Office Nuremberg Adam-Klein-Strasse Nürnberg Germany
Network Certification Body
Network Certification Body Scheme rules for assessment of Entities in Charge of Maintenance in accordance with requirements of ECM Regulation EU 445/2011 ECM certification scheme 1 NCB_MS_106_ECM Introduction
More informationTÜV Rheinland Global Rail: Assessment and Certification.
TÜV Rheinland Global Rail: Assessment and Certification. Denis Belinsky, Shutterstock www.tuv.com Our Principle: Solution-oriented Assessment and Certification for Rail and Transport Technology. In the
More information25th of October EuroMedRail project National Safety Authority Belgium
25th of October 2017 - EuroMedRail project National Safety Authority Belgium 2 Content 1. Legal basis and history 2. The Belgian rail system 3. Railway safety in Belgium 2016 4. The Belgian NSA : DRSI
More informationSome views on the challenges for stakeholders on conformity assessment activities
on Accreditation and Conformity Assessment Some views on the challenges for stakeholders on conformity assessment activities Rome, 28 June 2013 Mr Technologist INAIL INAIL The national insitute of insurance
More informationNetwork Certification Body
Network Certification Body Scheme rules for assessment of railway projects to requirements of the Railways Interoperability Regulations as a Notified and Designated Body 1 NCB_MS_56_Notified and Introduction
More informationAuthorization of infrastructure in Denmark and Norway - similarities and differences
Authorization of infrastructure in Denmark and Norway - similarities and differences Liz Anette Stordahl, Principal Engineer, Norwegian Railway Authority (Liz.Anette.Stordahl@sjt.no) and Mari Ruuhi, Danish
More informationRECOMMENDATION FOR USE
Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all
More informationSector Vision for the Future of Reference Standards
The Group of Representative Bodies (GRB) The Sector Forum Rail (SFR) Sector Vision for the Future of s Brussels, 13 th July 2018 Sector Vision for Future of s 13 th July 2018 Page 1 of 6 Scope of position
More informationRECOMMENDATION FOR USE
Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,
More informationManufacturer certification in plant, metal and rolling-stock engineering
Manufacturer certification in plant, metal and rolling-stock engineering To ensure you meet the highest quality standards. TÜV SÜD Industrie Service GmbH Be prepared for going global In the course of globalisation,
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More informationRNE Common Components System (CCS)
RNE Common Components System (CCS) CSS & TAF/TAP regulations The requirements for the Common Components System (CCS) have been set by European Union legislation, namely: Commission Regulation (EC) No 62/2006
More informationRequirements for Certification Bodies
ISCC PLUS 251 Requirements fo Certification Bodies Requirements for Certification Bodies ISCC PLUS 251 V 1.0 Copyright notice ISCC 2012 This ISCC document is protected by copyright. It is freely available
More informationNDT Certification for Railway Maintenance Personnel in France; 10 Years of the CFCM
5th International Conference on Certification and Standardization in NDT - Lecture 29 NDT Certification for Railway Maintenance Personnel in France; 10 Years of the CFCM Jacques BOUVY, Comité Ferroviaire
More informationLaboratory Accreditation Building Confidence on Testing Quality
Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME
More informationUDI in the MDR. Economic Operators The new regulations create Economic Operators who play a role in the UDI system.
UDI in the MDR The European Union intends to replace the existing directives related to medical device, Active Implantable Medical Devices, In Vitro Diagnostic Devices, and Medical Devices, with two regulations.
More informationImpact assessment for change to a Railway Group Standard, new Rail Industry Standard and withdrawal of associated RACOPs and Guidance Note
Impact assessment for change to a Railway Group Standard, new Rail Industry Standard and withdrawal of associated RACOPs and Guidance Note Version: Publication Date: 05 September 2017 Relevant Railway
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationGuide for the application of the CR NOI TSI
European Railway Agency According to Framework Mandate C(2007)3371 final of 13/07/2007 Reference in ERA: ERA/GUI/07-2011/INT Version in ERA: 1.01 Date: 03 December 2013 Document prepared by Document type:
More informationInhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593
Inhalt 1. CERTIFICATION PROCEDURE... 2 1.1 Audit Preparation... 2 1.2 Audit Stage 1... 2 1.3 Audit Stage 2 Certification Audit... 3 1.4. Issue of Certificate... 3 2. SURVEILLANCE AUDIT... 3 3. RECERTIFICATION
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationLL-C (Certification) Services Overview
LL-C (Certification) Services Overview Who is LL-C (Certification)? LL-C (Certification) is an international certification body operating in more than 40 countries with experience in the field. Provides
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationSiemens view and approach on critical infrastructure resilience against cyberthreats Joint OECD-JRC Workshop, Paris September 2018
Siemens view and approach on critical infrastructure resilience against cyberthreats Joint OECD-JRC Workshop, Paris 24-25 September 2018 Unrestricted https://www.siemens.com/press/charter-of-trust Cybersecurity
More informationDAkkS Who we are. Attesting competence, Assuring quality, Creating confidence.
DAkkS Who we are Attesting competence, Assuring quality, Creating confidence. What is accreditation? Reliability through conformity assessment The demands on the quality of goods and services are growing
More informationITU CoE Center of Excellence in Portugal
A WORLD OF SOLUTIONS ITU CoE Center of Excellence in Portugal ABOUT ISQ SERVICE DELIVERY TECHNICAL INSPECTIONS ENGINEERING & CONSULTANCY TESTING R & D +I TRAINING & EDUCATION VERIFICATION & REGULATORY
More informationCOMMISSION DECISION. of
EUROPEAN COMMISSION Brussels, 6.11.2012 C(2012) 7325 final COMMISSION DECISION of 6.11.2012 amending Commission Decision 2012/88/EU on the technical specifications for interoperability relating to the
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationAccreditation programme for management systems certification bodies NAR IRT Edition 2
Accreditation programme for management systems certification bodies NAR-01-04-IRT Edition 2 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed
More informationCertification program PCWU-3
The certification program of utility products type 3 of the certification program according to PN-EN ISO/IEC 17067 Number: Page: 1 z 8 MS-0013527 Is valid from: 01.03.2016 Prepared: Tomasz Marcinek Approved:
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationeidas Regulation eid and assurance levels Outcome of eias study
eidas Regulation eid and assurance levels Outcome of eias study Dr. Marijke De Soete Security4Biz (Belgium) ETSI eidas Workshop 24 June 2015 Sophia Antipolis eidas Regulation Regulation on electronic identification
More informationPrivacy Statement for Use of the Trust Service of Swisscom IT Services Finance S.E., Austria
Privacy Statement for Use of the Trust Service of Swisscom IT Services Finance S.E., Austria General Privacy is a matter of trust, and your trust is important to us. Handling personal data in a responsible
More informationDescription of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS BS OHSAS 18001, MS - ISO 45001, MS - ISO 50001
The certification of a management system based on standard ISO 9001, ISO 14001, ISO/TS 29001, BS OHSAS 18001, ISO 45001 or ISO 50001, consists of the offer and contract phase, the audit preparation, performance
More informationUnited Kingdom Accreditation Service
United Kingdom Accreditation Service ACC REDITATION C ERTI FIGATE CERTIFICATION BODY No.4718 lnterface NRM Limited is accredited in accordance with the recognised lnternational Standard ISO/lEC 17021:2011
More informationETHIOPIAN NATIONAL ACCREDITATION OFFICE. Minimum Requirements For The Operation Of Product Certification Bodies
ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation Of Product Certification Bodies April 2011 Page 1 of 7 NO CONTENTS Page 1. Introduction 2 2. Scope 2 3. Definitions 2 4 Management
More informationSERVICE DESCRIPTION ISO Lex. Certifications
SERVICE DESCRIPTION Lex ISO/IEC 20000-1 INFORMATION TECHNOLOGY - SERVICE MANAGEMENT SYSTEM Companies of any size rely on effective IT service management. No matter where you re based or what you do, your
More informationTÜV SÜD Rail. Consulting, training, engineering, testing and certification solutions. InnoTrans September 2012 TÜV SÜD
Rail Consulting, training, engineering, testing and certification solutions InnoTrans September 2012 Choose certainty. Add value. provides people with the confidence to use technology by providing testing,
More informationRST Standards Committee Chairman s presentation. Presented by Hugh O Neill 17 November 2016
RST Standards Committee Chairman s presentation Presented by Hugh O Neill 17 November 2016 1. Key issues from the last six months 1. Sanders Standard GMRT2461 issue 2 was published Jun 2016: 3 months early
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SK ID Solutions AS Pärnu avenue 141 11314 Tallinn, Estonia to confirm that its trust service EID-SK
More informationConformity Control Activities Tunisia Case Study
ITU Regional Workshop on Bridging the Standardization Gap and Interactive Training Session (Algiers, Algeria, 26 27 September 2011 ) Conformity Control Activities Tunisia Case Study Sami Trimech Cooperation
More informationCONCURRENT SESSIONS Wednesday 8:30 10:30 KEMPINSKI HOTEL CORVINUS Erzsébet tér 7-8, Budapest V.
June 22, 2011 (Wednesday) 55th EOQ Congress CONCURRENT SESSIONS Wednesday 8:30 10:30 KEMPINSKI HOTEL CORVINUS Erzsébet tér 7-8, Budapest V. SALON BANDINI/MARZINO Wednesday 11:00 12.30 16.1. ACCREDITATION
More informationData Processing Clauses
Data Processing Clauses The examples of processing clauses below are proposed pending the adoption of standard contractual clauses within the meaning of Article 28.8 of general data protection regulation.
More informationGUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
More informationConformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant
Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Standardization Bureau (TSB) Consultant Moscow, 9-11 november 2011 Contents The benefits of conformity assessment Conformity
More informationNational Accreditation Board for Certification Bodies
BCB 160-Dec 2016 Accreditation Criteria For Trustworthy Digital Repository Certification Bodies BCB 160 Dec 2016 Date Effective - 1 Jan 2017 Accreditation Criteria for TDRCBs (BCB 160 Dec 2016) Page 1
More informationEnd-to-end Safety, Security and Reliability Keys for a successful I4.0 Migration
End-to-end Safety, Security and Reliability Keys for a successful I4.0 Migration Dr. Andreas Hauser Director Digital Service, TÜV SÜD Tokyo, 21 February 2017 Corporate Profile Slide 2 Our heritage: 150
More informationGdańsk, DECEMBER 2017
Principles of using management systems certification marks December 2017 were approved by the Manager of the Management Systems Certification Bureau of Polish Register of Shipping on 1 December 2017. On
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust
More informationALTER TECHNOLOGY TÜV NORD (ATN)
ALTER TECHNOLOGY TÜV NORD (ATN) H2020 Secure Societies - Interest as a PARTNER OBJECTIVE 7. Enhance standardisation and interoperability of systems, including for emergency purposes TÜV NORD GROUP 2 TÜV
More informationTÜV SÜD Industrie Service GmbH. Maximising efficiency of power stations and plants.
TÜV SÜD Industrie Service GmbH Maximising efficiency of power stations and plants. Maximising efficiency, increasing safety and availability at TÜV SÜD, we know what is important for power stations and
More informationRules for LNE Certification of Management Systems
Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationTELECOMMUNICATIONS AND DATA CABLING BUSINESSES
DRAFT for RCWS, ADTIA & ICAA INDUSTRY CODE for TELECOMMUNICATIONS AND DATA CABLING BUSINESSES Registered by the ACMA on XX XXXXX 2016 TABLE OF CONTENTS TABLE OF CONTENTS 2 1. SCOPE AND OBJECTIVES 3 1.1
More informationScheme for accreditation, approval and authorization to Access Security-related Repair and Maintenance Information (RMI) SERMI operations group
Scheme for accreditation, approval and authorization to Access Security-related Repair and Maintenance Information (RMI) SERMI operations group May 2016 Table of contents 1 Scope... 4 2 Normative references...
More informationeidas Workshop Return on Experience from Conformity Assessment Bodies - EY June 13, 2016 Contacts: Arvid Vermote
eidas Workshop Return on Experience from Conformity Assessment Bodies - EY June 13, 2016 Contacts: Arvid Vermote arvid.vermote@be.ey.com EY eidas Certification scheme Scheme EY CertifyPoint B.V. is currently
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationFSSC Information Day 2014 Integrity Program
FSSC 22000 Information Day 2014 Integrity Program Specifics FSSC 22000: Introduction Auditor competence Integrity program definition and overview Integrity program statistics Technical updates Moving forward
More informationPRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM
Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationSubsea Performance Bolt Workshop
Subsea Performance Bolt Workshop API Spec Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, 9 th Edition API Spec
More informationBenefits of Accredited Conformity Assessment and the Supply Chain
Benefits of Accredited Conformity Assessment and the Supply Chain By Sheronda Jeffries and Carmine Reda Companies purchase lots of things. They purchase tangible goods, such as raw materials and equipment;
More informationSubcontractor Approval Form
Page 1 of 7 1. General Information Company / Partnership / Individual Address: Telephone: Email: Website: Main Contact Telephone: Email: Outline scope of company works: 2. Financial Information Bank Account
More informationNational Accreditation Scheme
National Accreditation Scheme Rules of Procedure on the Preparation of Accreditation Audit Cycle NAR-25 Edition 3 Version 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation:
More informationITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles
ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability Session 2: Conformity Assessment Principles 12-16 October 2015 Beijing, China Keith Mainwaring ITU Expert Agenda 1. Context
More informationGlobal Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY CONTENTS PAGE Foreword 3 1. Introduction 4 2. Criteria for approval of Certification Body 4 3. Selection of audit team members certifying
More informationInspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T
Inspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T What is Certification? Organic certification system is a quality assurance initiative,
More informationNATIONAL CERTIFICATE in 1 of 14
NATIONAL CERTIFICATE in 1 of 14 level of qualification: 3 credit total: 70 91 Wiredrawing Strand CC C E level 1 credits: - 6 0-6 level 2 credits: 10 8 0-6 level 3 and above credits: 26 5 9 minimum totals:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI 53012 Adam Alger Phone: 262 375 4400 ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate
More informationCreating NIS Compliant Country in a Non-Regulated Environment. Jurica Čular
Creating NIS Compliant Country in a Non-Regulated Environment Jurica Čular (jcular@zsis.hr) What NIS actually is? NIS Directive NIS Network Information Security Directive EU Cyber Security Policy Mandatory
More informationILNAS/PSCQ/Pr004 Qualification of technical assessors
Version 1.1 21.6.2016 Page 1 of 6 ILNAS/PSCQ/Pr004 Qualification of technical assessors Modifications: review of the document 1, avenue du Swing L-4367 Belvaux Tél.: (+352) 247 743-53 Fax: (+352) 247 943-50
More informationWelding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationThe Role of the American National Standards Institute (ANSI) Irwin Silverstein, Ph.D. IPEA
The Role of the American National Standards Institute (ANSI) 1 ANSI Activities American National Standard: Excipient GMP Accreditation of Product Conformity Bodies Certification to Excipient GMP 2 IPEA
More informationExternal Assessment Specifications Document Curriculum. NQF Qualification Title Code
External Assessment Specifications Document Curriculum NQF Qualification Title Code Level 671101000 Occupational Certificate: Electrician 4 Name E-mail Phone Logo National Assessment Artisan Quality Moderation
More informationThe international CETECOM Group. ETSI ITS Workshop 2013 Session 4 Testing and Certification CETECOM ITS Service Partner Ulrich Keuling, CETECOM
The international CETECOM Group ETSI ITS Workshop 2013 Session 4 Testing and Certification CETECOM ITS Service Partner Ulrich Keuling, CETECOM Wireless Car Connectivity 2 Driving factors behind Car Connectivity
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This gives the list of EA documents to be
More informationCEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
More informationeias Study on an electronic identification, authentication and signature policy SUPERVISION Presentation on status
eias Study on an electronic identification, authentication and signature policy SUPERVISION Presentation on status in the context of COM(2012) 238 Proposal for a Regulation on electronic identification
More informationHohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany
Certification Body Products Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein 74357 Boennigheim Germany File: APPLICATION for award of the GS safety mark for a HuPF assessment (for products) for
More informationMarks associated with TUV SUD BABT Certification Schemes
TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation
More informationAudit and Certification Process of GUTcert for
Audit and Certification Process of GUTcert for PRODUCT CERTIFICATION ACC. TO ISO 17065 Sustainable Biomass acc. ISCC and REDcert GUT Certifizierungsgesellschaft für Managementsysteme mbh Umweltgutachter
More informationRSPO Certification Step by step
RSPO Certification Step by step Index Terms and definitions... 3 Objectives and applicable certification schemes... 5 Evaluation procedures... 7 Certification request... 7 Critical analysis of certification
More informationAssessments Audits CERTIFICATION
IT SECURITY Cyber Security Training Consulting Analyses Assessments Audits CERTIFICATION Increasing connectivity of equipment, systems and applications in cyberspace networks harbours additional risks.
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust
More informationReport of analysis of training programs in the field of QMS from EU partners - POLAND
Improvement of Partnership with Enterprises by Enhancement of a Regional Quality Management Potentials in WBC University of Montenegro, Cetinjska 2, 81000 Podgorica, Montenegro www.ucg.ac.me e-mail: rektorat@ac.me,
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Bundesnotarkammer Burgmauer 53 50667 Köln, Germany to confirm that its trust service BNotK qualifizierte
More informationRegulations for Compulsory Product Certification
Regulations for Compulsory Product Certification Chapter I General Provisions Article 1 Based on relevant laws and regulations covering product safety licensing and product quality certification so as
More informationOverview of conformity assessment programs and ASTM International s related activities
Overview of conformity assessment programs and ASTM International s related activities African Organization for Standardization 21 June 2016 Tim Brooke Vice President Certification Training, and Proficiency
More informationCompEx Scheme Update to Engineers Ireland Dublin
CompEx Scheme Update to Engineers Ireland Dublin Martin Jones CompEx Operations Manager 28 th January 2016 The CompEx Competency Scheme Ensuring safer working in explosive atmospheres through a proven
More informationApplication for Issue of certification according to DIN 6701 Bonding of railway vehicles and vehicle parts
Issue of certification according to DIN 6701 Bonding of railway vehicles and vehicle parts To be sent to: Certification Authority OFI CERT Mr DI Udo Pappler Tel.: +43 (0) 1 7981601-790 Franz Grill Straße
More information_isms_27001_fnd_en_sample_set01_v2, Group A
1) What is correct with respect to the PDCA cycle? a) PDCA describes the characteristics of information to be maintained in the context of information security. (0%) b) The structure of the ISO/IEC 27001
More informationList of forms CLAP/WGP by subject /68/UE
List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations
More informationEGNOS and ESSP Certification. ESESA Aviation Workshop 26 th - 27 th October 2010
EGNOS and ESSP Certification ESESA Aviation Workshop 26 th - 27 th October 2010 Content 1. Certification needs and framework 2. SES Certification regulations 3. Certification activities 4. Current Status
More information