CISCO EXAM QUESTIONS & ANSWERS

Transcription

1 CISCO EXAM QUESTIONS & ANSWERS Number: Passing Score: 800 Time Limit: 120 min File Version: CISCO EXAM QUESTIONS & ANSWERS Exam Name: Implementing Cisco Video Network Devices (VIVND)

2 Certdumps QUESTION 1 What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints? A. It is the IPv4 address of the default gateway for the subnet that the video endpoints is connected to. B. It is the configured SIP register and proxy server. C. It is the unique NTP server IPv4 address. D. It is the unique NTP server IPv4 address. E. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting. F. Option 150 is not importance. Correct Answer: E QUESTION 2 You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity? A. Utils network traceroute newsystem.domain254.local B. Utils network host cucum.osl147.local C. Traceroute D. Ping E. Utils network ping Correct Answer: E QUESTION 3 What is the optimum distance for a person sitting using the Cisco TelePresence System 500? A. 1.2 meters and 1.8 meters (4 and 6 feet) B. 0.5 meters and.75 meters (1.5 and 2.5 feet) C. 3.0 and 5.0 meters (10 and 15 feet) D. The camera can adjust automatically Correct Answer: A QUESTION 4 Which three Cisco TelePresence multipoint media conferencing platforms can utilize Cisco Unified Communication Manager for call control? (Choose three) A. Cisco TelePresence Server B. Cisco TelePresence Multipoint Control Unit C. Cisco TelePresence SX20 D. Cisco TelePresence Media Bridge Server E. Cisco TelePresence System F. Cisco TelePresence Multipoint Switch Correct Answer: BEF

3 /Reference: "First Test, First Pass" QUESTION 5 Which configuration is needed in the order for Cisco Jabber Video for TelePresence to initiate Multi way calls? A. Configure the Multi way URL address under Cisco TelePresence Video Communication Server > Systems > provisioning > Users > Configuration Template. B. Configure the Multi way URI address TelePresence Management Suite > Systems > Provisioning > Users > Configuration Template. C. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is the enabled by default. D. Configure the Multi way address under Video Settings in the Cisco Jabber Video for TelePresence client. Correct Answer: A QUESTION 6 Which statement is correct regarding the difference between Multisite and Multi way conferencing? A. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multi way requires a Cisco TelePresence Video Communications Server and a centralized multipoint unit. B. Multisite requires configuration on the endpoint, whereas Multi way requires the Multi way options key to be installed. C. Multisite requires the presence of a multipoint control unit, whereas Multi way relies on the endpoint conferencing capacity. D. Multisite is used to Conference in multiple sites, whereas Multi way is initiate multipoint conferencing Correct Answer: A QUESTION 7 When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three) A. Cisco Unified Communication Manager B. Multipoint control unit C. Cisco Unity Connection D. Video conferencing endpoints E. Cisco Unified IM and Presence Correct Answer: ABD /Reference:

4 QUESTION 8 A user wants to use the one Button to Push on a TelePresence System Video endpoint. Which configuration tool should be used to allow the One Button in Push feature to work? A. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push. B. Active Directory server, users, new conference, One Button to Push C. Cisco Giga switch Router, Call Manager Express. One Button to Push D. Cisco Unified Communications Manager server, photos, devices, One Button to Push E. Cisco TelePresence Manager Suite server, new conference, set Conference type to one Button to Push Correct Answer: E QUESTION 9 Which two Cisco TelePresence systems would be appropriate for an execute personal office? (Choose two) A. Cisco TelePresence System 500 B. Cisco TelePresence EX Series C. Cisco Jabber D. Cisco Jabber Video for TelePresence E. Cisco IP Video Phone E20 Correct Answer: AB QUESTION 10 You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of Which three devices could you use to see if the endpoint is required and available for a call? (Choose three) A. Cisco TelePresence Video Communication Server B. Cisco 3250 Layer 2/3 Switch C. Active Directory Server D. Cisco Giga Switch Router E. Cisco Unified Communications Manager server F. Cisco TelePresence Manager Suite server "First Test, First Pass" Correct Answer: ACF QUESTION 11

5 Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two) A. The username and password in Cisco Jabber phone services are misconfigured. B. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communication Manager. C. The Cisco Unified Communication manager IM and Presence Services is not available. D. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communication Manager. E. The Cisco Jabber initial audio and video settings to be set. F. The called user presence status is unknown. "First Test, First Pass" Correct Answer: BD QUESTION 12 Refer to the exhibit. Which two settings that could be dialed to start a multipoint conference that is hosted by the multipoint control? (Choose two).

6 A. local B C. local D. local E. ex90 F Correct Answer: BD QUESTION 13 Refer to the exhibit. Which SIP URI should be dialed in order to reach the endpoint that is registered with the IP address from another endpoint with a URI of sip e20@dca test? "First Test, First Pass" - 8

7 A. local B. ex90 C. sip local D E Correct Answer: C QUESTION 14 Instructions: To access the multiple-choice question, click on the tab titled "Question" on the bottom of the panel. Scenario: In this item, you will need to use all information presented to you to successfully answer the question.

8 "First Test, First Pass"

9

10 "First Test, First Pass"

11

12 "First Test, First Pass"

13

14 "First Test, First Pass"

15 The EX90 Series endpoint (codec) fails to register its H.323 aliases with the VCS that is located in a different network. The EX90 has successfully registered its SIP URI with another VCS in remote network. Based on the exhibits, what could be causing the issue? A. The codex has the wrong domain name. B. The Cisco Unified Communication Manager does not see the registration request. C. The VCS does not see the registration request. D. The codec has duplicate H.323 aliases that are already registered with the VCS at Correct Answer: D QUESTION 15 Refer to the exhibit. You have just finished installing a 65-inch profile system in a multipurpose room. After powering up entire system, only one display is used. Using the information in the exhibit, why is the second display not displaying anything from the system?

16 "First Test, First Pass" A. The dual display option key has not been input into the codec. B. The codex has the appropriate option keys installed, so entire the display is not cabled correctly, the codec is configured correctly, the codec is configured incorrectly, or there is no input being sent to the display. C. The Cisco TelePresence profile systems do not support dual display. D. The display is not powered on. Correct Answer: A QUESTION 16 Instructions: To access the multiple-choice question, click on the tab titled "Question" on the bottom of the panel. Scenario: In this item, you will need to use all information presented to you to successfully answer the question.

17 "First Test, First Pass"

18

19 "First Test, First Pass" A.

20 B. C. D. Correct Answer: /Reference: Local NS Web Server Edit QUESTION 17 When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System Codec C40, which FECCs are available? A. Left, right, up, down, zoom-in, and zoom-out are all available B. Only up and down are available C. No FECO is available D. Only left and right are available Correct Answer: A QUESTION 18 Refer to the exhibit. Under which tab can the registration status for the endpoint be found? "First Test, First Pass" A. Diagnostics B. Configuration C. Maintenance D. Call control Correct Answer: A QUESTION 19 Which of these is the core component of the Cisco Video Surveillance product suite that handles recording and serving of video feeds? A. Cisco IP camera B. Video Communication Server C. Cisco Video Surveillance Operations Manager D. Cisco Video Surveillance Media Server Correct Answer: AD

21 QUESTION 20 Refer to the exhibit. Under which tab can the log file for the endpoint found? A. Call Control B. Configuration C. Diagnostics "First Test, First Pass" D. Maintenance Correct Answer: C QUESTION 21 Refer to the exhibit. You must dial the interaction response system of the multipoint control unit. What are the appropriate dual-tone multi-frequency digits to create an ad-hoc conference with an identifier of 2345?

22 A B * 2345# C. 5919* 2345 D. 2345# Correct Answer: B QUESTION 22 Instructions: This item contains one question that you must answer. You can view this question by clicking on the corresponding button to the left. In order to complete the question, you need to refer to the scenario, the topology, and the exhibits at the bottom of the screen. Scenario: In this item, you will need to use all information presented to you to successfully answer the question.

23 "First Test, First Pass"

24

25 "First Test, First Pass"

26 "First Test, First Pass"

27 The Cisco TelePresence Codex C90 is unavailable to call the Cisco IP Video Phone Assuming that the calling search space has been configured correctly, which of these can cause this issue? A. The Cisco TelePresence Codec C90 can only be registered to a Cisco TelePresence Video Communication Server. B. A multipoint control unit is required in order for the call to work. C. The Cisco TelePresence Codex C90 can only be registered as a SIP endpoints Cisco Unified Communication Manager H.323 us not supported. D. URI dialing has not been configured on a Cisco Unified Communications Manager. "First Test, First Pass" E. The Cisco TelePresence Codec C90 Profile 1> Call Setup Mode must be configured as a gateway since Cisco Unified Communications manager Does not have a gatekeeper functionality. F. The Cisco TelePresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco TelePresence Codec C90 needs to be registered as both SIP and G Correct Answer: C QUESTION 23 What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

28 A. The Cisco TelePresence Multipoint Control Unit us a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge. B. The Cisco TelePresence Multipoint Contact Unit is a software bridge for immersive and non Immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non- immersive endpoints. C. The Cisco TelePresence Multipoint Control Unit has a latency of 100 ms. D. The Cisco TelePresence Multipoint Control Unit delivers automatic voice activated switching. The Cisco TelePresence Multipoint Switch provides active presence. Correct Answer: D QUESTION 24 Refer to the exhibit. When the Cisco Jabber Video for TelePresence Fails to register with the server, which two fields should be configured at a minimum, assuring SRV records are not configured? (Choose two) "First Test, First Pass" A. The SIP domain B. The IP address of the Cisco TelePresence Management Suites for the internal server C. The internal DNS server name for the Cisco TelePresence management Suite D. The IP address of the Cisco Unified Communication Manager for the internal server

29 E. The internal or external DNS server name for the Cisco TelePresence Video Communications Server Correct Answer: AD QUESTION 25 Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communication manager for call control? A. Cisco TelePresence Media Bridge Server B. Cisco TelePresence Server C. Cisco TelePresence System D. Cisco TelePresence SX20 E. Cisco TelePresence Multipoint Switch F. Cisco TelePresence Multipoint Control Unit "First Test, First Pass" Correct Answer: E QUESTION 26 Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server SIP to function correctly? (Choose two) A. Unique system ID B. H.323 ID C. Configured SIP register and proxy server D. SIP uniform resource indicator E. NTP server IPv4 address F. E.164 alias Correct Answer: CD QUESTION 27 While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount of time for input to be received by the device before the system exits the password recovery mode? A. 20 seconds B. 60 seconds C. 40 seconds D. 30 seconds E. 15 seconds Correct Answer: B QUESTION 28 Refer to the exhibits. The screenshots show output from the xstatus of a Cisco TelePresence endpoint and the VCS registration. What are the protocol and direction of the call, the called party, and the transmit rate

30 of the call? "First Test, First Pass"

31 A. h.323, incoming, 5019* 2346, 1152 kbp/s B. h.323, outgoing, 5919* 2345, 1152 kbp/s C. h.323, incoming, 5919* 2345, 1152 kbp/s D. sip, incoming, 5919* 2345, 768 kbp/s E. sip, outgoing, 5919* 2345, 768 kbp/s Correct Answer: B QUESTION 29 Which of these needs to be enabled in Cisco Unified Communication in order for the Cisco TelePresence system to be able to share a presentation with a Cisco TelePresence System C40 endpoints that is registered to a VCS? A. Allow presentation sharing using H.323 B. Allow presentation sharing using BFCP C. Send send-receive SDP in mid-call invite D. Deliver conference bridge identifier

32 E. Allow ix application media Correct Answer: B QUESTION 30 What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packet loss? "First Test, First Pass" A. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss B. Less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss C. 20-ms one-way delay, no jitter, no packet loss D. 150-to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss Correct Answer: B QUESTION 31 Which component of the Cisco TelePresence multipoint media infrastructure is intended for use only with non-immersive endpoints? A. Cisco TelePresence System B. Cisco TelePresence Multipoint Switch C. Cisco TelePresence Multipoint Control Unit D. Cisco TelePresence Server Correct Answer: C QUESTION 32 Which two systems would be an appropriate solution for a traveling employee? (Choose two) A. Cisco IP Video Phone E20 B. Cisco TelePresence System 500 C. Cisco TelePresence EX Series D. Cisco Jabber E. Cisco C-Series codes F. Cisco Jabber Video for TelePresence Correct Answer: DF QUESTION 33 Which statement is true about Cisco TelePresence System system regarding the HVAC needs for the room where it is installed? A. You must supply a room that has energy-efficient lighting to reduce the temperature of the room. B. The system does not require any additional requirements above the normal HVAC requirements for the

33 room C. You must supply addition cooling requirements for the room. D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building Correct Answer: B QUESTION 34 Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communications Server for H.323 to function correctly? (Choose two.) A. unique DNS entry ID B. unique E.164 alias C. unique NTP server IPv4 address "First Test, First Pass" D. unique H.323 ID E. unique real-time transport protocol port numbers F. unique system ID Correct Answer: BD QUESTION 35 Which Cisco Video Surveilleance device is responsible for providing video stream to monitors after the respective layouts and views are received by the monitors? A. Cisco Video Surveillance Media Server B. Cisco Video Surveillance Manager C. Cisco IP Video Surveillance Operations Manager D. Cisco IP Video Surveillance Virtual Matrix Viewer Correct Answer: A QUESTION 36 What is correct order of steps to schedule a One Button to Push conference call between a Cisco TelePresence 500 and a Cisco TelePresence Codec C40? A. Configure the One Button to Push field under device configuration for the Cisco TelePresence System 500 and Codec C40. B. Configure One Button to Push under Cisco TelePresence Video Communications Server > Application > OBTP Configuration. C. Configure a new conference under Cisco TelePresence Management Suite > Booking New Conference > Type. D. Configure the Scheduler tool in the Cisco TelePresence Management Suite. E. The One Button to Push feature cannot be configured without a scheduling plug-in application plug-in application such as Microsoft Outlook. Correct Answer: C

34 QUESTION 37 Which of three devices require configuration in order for an endpoint to initiate a Multiway conference? A. Endpoint only B. Endpoint, Cisco TelePresence Video Communications Server, and multiple control unit C. Multipoint control unit only D. Endpoint and multipoint control unit only E. Endpoint and Cisco TelePresence Video Communications Server only F. Cisco TelePresence Video Communications Server only Correct Answer: B QUESTION 38 Refer to the exhibit. Which tab can be used in order to check the call statistics for the Cisco TelePresence Codec C60? "First Test, First Pass" A. Configuration B. Maintenance C. Diagnostics D. Call control E. The GUI cannot be used to view call statistics Correct Answer: C QUESTION 39 Threat monitoring in physical access security can be based upon which three of these? (Choose three) A. Weather B. Fingerprints C. Badges D. Age E. Doors F. Height Correct Answer: BCF QUESTION 40 During the initial setup of Cisco TelePresence System 500, you are required to do an initial camera setup. What might be a primary reason that the failure occurs?

35 A. The room is too dark B. The system is too far away from the target C. The camera cannot focus on the target D. The cable to the camera is not connected correctly Correct Answer: A QUESTION 41 Which two of these support an ad-hoc conference call? (Choose two) A. Using the booking tab in the Cisco TelePresence Maintenance State to configure a new conference B. Using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes. C. Using the tab Administrative Tools > Configuration > Conference Settings on the Cisco TelePresence Management Suite. D. Pressing the conference button on Cisco Unified IP Phone 8941 conference in a third call. E. Cisco TelePresence Multi way with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communication Server. "First Test, First Pass" Correct Answer: CD QUESTION 42 Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP is not used? (Choose three) A. Secure web browser B. Telnet C. Tandberg Remote Control V D. Touch screen interface E. CLI using a console cable F. Secure copy program Correct Answer: ACE QUESTION 43 When configuring the Cisco TelePresence System 500 with IP address, where should the IP address be configured? A. In Cisco Unified Communication Manager after adding the Cisco TelePresence System 500 manually. B. In the Cisco TelePresence Administration tool. C. Static IP address configuration is not possible. Only a DHCP-provided IP address is supported. D. Using the on-screen display E. In the Cisco TelePresence System 500 was added under systems. Correct Answer: E

36 QUESTION 44 Which CLI command can be used to reset the Cisco TelePresence System personal video system to a factory condition? A. Utils system factory init B. xcommand SystemUnitReset C. xconfiguration default factory D. utils reset factory E. utils factory reset 2 F. xcommand defaultvalues set level: 2 Correct Answer: A QUESTION 45 When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control? A. An Ethernet crossover cable (RJ-45-to-RJ45) B. A serial cable (DB25-to-DB9) C. A VISCA cable (DB-to-RJ45) D. An Ethernet cable (RJ45-to-RJ45) Correct Answer: C QUESTION 46 Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two) A. Cisco TelePresence Management Suite B. Cisco TelePresence Manager C. Cisco TelePresence Multipoint Control Unit D. Cisco Video Surveillance management Server E. Cisco Video Surveillance Operations Manager Correct Answer: AB QUESTION 47 What is the main difference between Cisco Jabber and Video TelePresence? A. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has video capabilities. B. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They should not coexist in the same network C. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence capabilities. D. Cisco Jabber registers to the Cisco Unified Communication Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS. E. Cisco Jabber Video for TelePresence Registers to Cisco Unified Communication Manager, Whereas Cisco Jabber Registers to the VCS.

37 Correct Answer: B QUESTION 48 Refer to the exhibit. What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresence Codec C60? "First Test, First Pass" A. A BFCP call is being initiated B. A direct call to is being made C. A Multi way call to multiway221@os147.local is being made D. No calls are being attempted by the endpoint E. The endpoint is receiving a call from VCS Correct Answer: C

38 QUESTION 49 In an important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which "First Test, First Pass" page would be a good place to start for troubleshooting the issue on the affected endpoint? A. Option A

39 B. Option B C. Option C D. Option D Correct Answer: B QUESTION 50 Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints? A. System Overview B. Configuration Templates C. Administrative Tools D. Provisioning E. Navigator Correct Answer: D QUESTION 51 Instructions: To access the multiple-choice question, click on the tab titled "Questions" on the bottom of the panel. Scenario: In this item, you will need to use all information presented to you to successfully answer the question. "First Test, First Pass"

40 "First Test, First Pass"

41 The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue? A. The subnet mask on the codec is innocent B. The IP address of the codec is incorrect C. The interface that the codec is in the wrong VLAN D. The codec did not receive a DHCP address from the DHCP server Correct Answer: A QUESTION 52 Which Cisco TelePresence endpoint uses only Cisco Communication Manager as its call control device? A. C60 B. SX20 C. Video Communication Server D. EX90 E. Cisco TelePresence System Correct Answer: E

42 QUESTION 53 Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? A. Cisco Video Surveillance Operations Manager B. Cisco Video Surveillance Virtual Matrix C. Cisco Video Surveillance Media Server D. Video Communication Server E. Cisco Video Surveillance Transcoding and Encoding Server "First Test, First Pass" Correct Answer: A QUESTION 54 Which TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time? A. enhanced continuous presence B. continuous presence C. active speaker D. room switching E. speaker switching Correct Answer: B QUESTION 55 When you register the Cisco TelePresence System video system with the Cisco Unified Communication Manager, what is the most important item for the register to be input the server? A. the IP telephone media access control address that is used to manage the system B. the media access control address of the Ethernet port of the Cisco TelePresence System "First Test, First Pass" C. The Cisco TelePresence System will always automatically register with the Cisco Unified Communications Manager server. D. the IPv4 address of the Cisco TelePresence System Correct Answer: D QUESTION 56 Which two these can cause registration problems for a Cisco TelePresence Code C40 endpoint running in H.323 mode? (Choose two.) A. The E.164 H323Alias has not been configured on the endpoint B. The H.323 license stack is not added to the endpoint.

43 C. The URI address has not been configured on the endpoint. D. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS. E. The IP default gateway address is incorrect for the endpoint. Correct Answer: AE QUESTION 57 Instructions: This item contains one question mat you must answer. You can view this question by clicking on the corresponding button to the left. In order to complete the question, you will need to refer to the scenario, the topology, and the exhibits at the bottom of the screen. Scenario: Refer to the exhibit. Using the information shown, answer the question shown on the Questions tab. "First Test, First Pass"

44 "First Test, First Pass"

45 "First Test, First Pass"

46 "First Test, First Pass"

47 "First Test, First Pass"

48 "First Test, First Pass"

49 *. indicates required item. **. Device reset is not required for changes to Packet Capture Mode and Packet Capture Duration. ***Note: Security Profit Contains Addition CAPF Settings. ****Note: A Protected device means it is capable of playing Secure and Non-Secure Tones. When the checkbox is checked, the user *****Note: A custom Softkey template without supplementary service Sofkeys must be used for a Hot line Device. "First Test, First Pass"

50 "First Test, First Pass"

51 "First Test, First Pass"

52 "First Test, First Pass"

53 "First Test, First Pass"

54 "First Test, First Pass"

55 When the Cisco Jabber user tries to call extension 3501, Cisco Jabber never places the No errors or messages are seen and no reorder lone is heard. Assuming that the Cisco Jabber calling search space is configured correctly in Cisco Unified Communications Manager, which of these could be causing this issue? A. CTI tor the end user must be enabled. B. Cisco Jabber must be reconfigured tor desktop mode. C. The username or password is misconfigured in Cisco Jabber. D. The Cisco Jabber Advanced Phone Settings are misconfigured. E. Cisco Jabber does not have the correct phone button template and hence has not registered to the Cisco Unified Communications Manager. F. The called user presence status is unknown. G. The called user has not been added as a contact in Cisco Jabber. Correct Answer: E QUESTION 58 What two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.) A. faster bit rate for storage B. analog to IP conversion C. large, expandable storage space D. scalability E. physical security "First Test, First Pass" Correct Answer: CE QUESTION 59 Cisco Video Communication Servers can be clustered to provide resiliency in the enterprise. What is the maximum number of cluster members? A. 2 B. 6 C. 7 D. 3 E. 15 Correct Answer: B QUESTION 60 Refer to the exhibit. When the administrator clicks the ticket number of any of the open tickets, which two actions are presented to the administrator? (Choose two.)

56 A. ignore ticket B. escalate ticket C. acknowledge ticket D. delete ticket E. close ticket Correct Answer: CD /Reference: "First Test, First Pass"