REVIEWED FOR VALIDITY OF DESIGN CRITERIA ONLY NO EXCEPTION TAKEN: REVISE AND RESUBMIT AS NOTED:

Transcription

1 PROJECT NAME: Shelby CS High School SUBMITTAL NO: OE PROJECT NO.: J MANUFACTURER: Cisco DESCRIPTION: Network Equipment Data Sheets & Shop Drawing Sub # Network Equipment Data Sheets SPEC SECTION: DATE RECEIVED 5/2/13 DATE DUE 5/9/ Superior Ave., # Wolf Ledges Pkwy., #300 Cleveland, OH Akron, OH t: t: f: f: osborn-eng.com This information is only for the general conformance with the design concept and the information given in the Construction Documents. Comments made on the shop drawings during this review do not relieve the contractor from compliance with the requirements of the plans and specifications and applicable laws, codes and regulations. Review of a specific item shall not include review of an assembly of which the item is a component. The Contractor is responsible for: dimensions to be confirmed and correlated at the job site; information that pertains solely to the fabrication processes or to the means, methods, techniques, sequences and procedures of construction; coordination of the Work with that of all other trades and performing Work in a safe and satisfactory matter. OSBORN DISTRIBUTION Discipline Reviewer Review Complete Date Action Architectural: Structural: Civil: Mechanical: Electrical: X Technology AMW Other: 1. px in the check box indicates the Primary Reviewer; x in the check box indicates additional Reviewer(s). 2. The Primary Reviewer should review the submittal first. 3. The Primary Reviewer is responsible for coordinating with the other disciplines. REVIEWED (REV): FURNISH AS NOTED (FN): REVISE AND RESUBMIT (RR): REJECTED (REJ): SUBMIT SPECIFIED ITEM: SUBMITTAL NOT REQUIRED AND NOT REVIEWED: REVIEWED BY: AWM DATE: 6/10/2013 REVIEWED FOR VALIDITY OF DESIGN CRITERIA ONLY NO EXCEPTION TAKEN: REVISE AND RESUBMIT AS NOTED: REVIEWED BY: DATE: Comments: 1. Convert any PoE line cards in the core 4500 to stackable PoE switches matching the edge switch specification. 2. Verify that the UPS s being provided meet the required runtime specified. 3. Please clarify how a 4000W power supply can be backed up by either a 2200 or 3000 VA UPS. 4. Verify quantity of single mode SFP s are being provided. Hold on procurement of these as this quantity will be reducing. Page 1 of 1 Submittal Review Form - Standard

2 Submittal Stamp Page PROJECT: Shelby High School CM / AE: Barton Malow Company, MKC Associates & Obsorn Engineering CONTRACTOR: Zenith Systems LLC Submittal Type Attached: Architectural Shop Drawings X Structural, Mechanical, Electrical Samples SUBMITTAL NO: 1 DATE: 5/1/2013 ITEM(S): Network Equipment Data Sheets & Shop Drawing QUANTITY: 1 SPECIFICATION SECTION(S): CONTRACTOR STAMP CM STAMP A/E STAMP

3 PROJECT SUBMITTALS Shelby Schools High School Technology Item # SEC / ITEM A A A 16 a A 16 a A 16 a A A B C C A D D D D DESCRIPTION MNFG PART NUMBER NOTES Core Switch Chassis Cisco WS C4510R+E= Core Supervisor Module Cisco WS X45 SUP7 E Power Supplies Cisco PWR C ACV= 24 Port SFP Line Card Cisco WS X4624 SFP E= 12 Port SFP Line Card Cisco WS X4612 SFP E= 48 Port Copper 10/100/1000 POE Line Card Cisco WS X4648 RJ45V+E= 48 Port Copper 10/100/1000 Line Card Cisco WS X4648 RJ45 E= 48 Port 10/100/1000 non POE Edge Switch Cisco WS C2960S 48TS L 48 Port 10/100/1000 POE Edge Switch (370W) Cisco WS C2960S 48LPS L 24 Port 10/100/1000 POE Edge Switch (370W) Cisco WS C2960S 24PS L Wireless Access Points Cisco AIR LAP1142N A K9 Wireless Controller Cisco AIR CT K9 Wireless Control System Dell R 320 WCS Licenses Cisco WCS PLUS 100 Mobility Services Engine Cisco AIR MSE 3310 K UPS Unit with Battery Pack APC SMX3000RMLV2U + SMX120RMBP2U 3000 UPS Unit APC SMT3000RM2U 2200 UPS Unit APC SMT2200RM2U UPS Network Management Card APC AP 9630 Power Distribution Unit APC AP7832 Power Distribution Unit APC AP Fiber SFP Module Cisco GLC SX MM Copper SFP Module Cisco GLC T Please see associated closets below Please see associated closets below Please see associated closets below works with all submitted UPS units Please see associated closets below Please see associated closets below Network Shop Drawing Zenith UPS Units ER 1 11: SMX3000RMLV2U + SMX120RMBP2U ER 1 11: SMT3000RM2U TR 1 11: SMT2200RM2U TR 1 12: SMT2200RM2U *UPS units based on calculations as specified Power Distribution Units SMX3000RMLV2U + SMX120RMBP2U: AP7832 SMT3000RM2U: AP7832 SMT2200RM2U: AP7830 *PDUs are based on compatibility with UPS units calculated & provided per specifications

4 Data Sheet Cisco Catalyst 4500E Series Chassis High Performance, Mobile and Secure User Experience Overview The Cisco Catalyst 4500 Series Switches enable borderless networks, providing high performance, mobile, and secure user experience through Layer 2-4 switching investments. It enables security, mobility, application performance, video, and energy savings over an infrastructure that supports resiliency, virtualization, and automation. Cisco Catalyst 4500 Series Switches provide borderless performance, scalability, and services with reduced total cost of ownership and superior investment protection. Cisco Catalyst 4500 (Figure 1) has a centralized forwarding architecture that enables collaboration, virtualization, and operational manageability through simplified operations. With forward and backward compatibility spanning multiple generations, the new Cisco Catalyst 4500E Series provides exceptional investment protection and deployment flexibility to meet the evolving needs of organizations of all sizes. The Cisco Catalyst 4500E Series platform has 10 Gigabit Ethernet (GE) uplinks and supports PoEP, enabling the customers to future proof their network. E-Series chassis come in four different form factors: 3-slot (4503-E), 6-slot (4506-E), 7-slot (4507R+E/4507R-E), and 10-slot (4510R+E/4510R-E) E, 4506-E, 4507R+E, and 4510R+E chassis are extremely flexible and support either 6 Gbps, 24 Gbps, or 48Gbps per line-card slot. 4507R-E and 4510R-E chassis are limited to 6 Gbps and 24 Gbps per line-card slot. Integrated resiliency in the Cisco Catalyst 4500E Series includes 1+1 supervisor engine redundancy (10-slot and 7-slot only), redundant fans, software-based fault tolerance, and 1+1 power supply redundancy. Integrated resiliency in both hardware and software minimizes network downtime, helping to ensure workforce productivity, profitability, and customer success. Figure 1. Cisco Catalyst 4500E Series The Cisco Catalyst 4500E Series extends control to the network edge with intelligent network services, including sophisticated quality of service (QoS), predictable performance, advanced security, comprehensive management, and integrated resiliency. Scalability of these intelligent network services is made possible with dedicated, specialized resources known as ternary content-addressable memory (TCAM). Ample TCAM resources (up to 384,000 entries) enable high feature capacity, which provides wire-speed routing/switching performance independent of provisioning of services such as QoS and security Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 12

5 Data Sheet Cisco Catalyst 4500E Series Chassis The Cisco Catalyst 4500E Series offers four chassis options and eight supervisor engine options (Table 1). It provides a common architecture that can scale up to 388 ports. The Cisco Catalyst WS-C4507R+E, WS-C4510R+E, WS-C4507R-E, and WS-C4510RE offer high availability by supporting 1+1 redundant supervisor engines with subsecond failover time and full-image In-Service Software Upgrades (ISSUs). Nonstop forwarding with Stateful Switchover (NSF/SSO) and ISSU help ensure continuous packet forwarding during supervisor engine switchover to help ensure high availability for collaboration applications and voice over IP (VoIP). Using the same line cards as the widely deployed Cisco Catalyst 4000 Series Switches and classic Cisco Catalyst 4500 Series Switches, the Cisco Catalyst 4500E Series furthers Cisco s commitment to affordable enterprise and branch scalability. Table 1. Cisco Catalyst 4500E Series Chassis Features Feature Cisco Catalyst WS-C4503-E Chassis Cisco Catalyst WS-C4506-E Chassis Cisco Catalyst WS-C4507R+E Chassis Cisco Catalyst WS-C4510R+E Chassis Total number of slots Line-card slots Supervisor engine slots Dedicated supervisor engine slot numbers Supervisor engine redundancy Supervisor engines supported Bandwidth scalability per line-card slot Number of power supply bays and 4 5 and 6 No No Yes Yes (Supervisor V-10GE, 6- E and 7-E) Supervisor 7-E Supervisor 6-E Supervisor 6L-E Supervisor V-10GE Supervisor 7-E Supervisor 6-E Supervisor 6L-E Supervisor V-10GE Supervisor 7-E Supervisor 6-E Supervisor 6L-E Supervisor V-10GE Supervisor 7-E Supervisor 6-E 4 Supervisor V-10GE Up to 48 Gbps on all slots Up to 48 Gbps on all slots Up to 48 Gbps on all slots 5 Up to 48 Gbps on all slots AC input power Yes Yes Yes Yes DC Input power Yes Yes Yes Yes Integrated Power over Ethernet Minimum number of power supplies Yes Yes Yes Yes Power supplies supported 1000W AC 1000W AC 1000W AC 1400W AC 1400W AC 1400W AC 1400W AC 2800W ACV 1300W ACV 1300W ACV 1300W ACV 4200W ACV 2800W ACV 2800W ACV 2800W ACV 6000W ACV 4200W ACV 4200W ACV 4200W ACV 1400W DC (triple input) 6000W ACV 6000W ACV 6000W ACV 1400W-DC-P 1400W DC (triple input) 1400W DC (triple input) 1400W DC (triple input) 1400W-DC-P 1400W-DC-P 1400W-DC-P Number of fan-tray bays Location of 19-inch rack mount Location of 23-inch rack mount Front Front Front Front Front (option) Front (option) Front (option) Front (option) 1 Slot 1 is reserved for supervisor engine only; slots 2 and higher are reserved for line cards. 2 Slots 3 and 4 are reserved for supervisor engines only in Cisco Catalyst 4507R-E and 4507R+E; slots 1-2 and 5-7 are reserved for line cards. 3 Slots 5 and 6 are reserved for supervisor engines only in Cisco Catalyst 4510R-E and 4510R+E; slots 1-4 and 7-10 are reserved for line cards. 4 6 Gbps only on slots WS-C4507R-E and WS-C4510R-E chassis support up to 24G per line-card slot when used with Sup6-E Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 12

6 Data Sheet Configuration Alternatives The Cisco Catalyst 4500 Series offers a powerful and flexible network solution that can be built with eight supervisor engine alternatives. Each provides a high-performance, centralized, shared-memory switch fabric, protecting your line-card investment by supporting the addition of optional higher layer engines (Table 2). Table 2. Cisco Catalyst 4500E Series Supervisor Engine Support Feature Cisco Catalyst 4500 Series Supervisor V-10GE Cisco Catalyst 4500 Series Supervisor 6L-E Cisco Catalyst 4500 Series Supervisor 6-E Cisco Catalyst 4500 Series Supervisor 7-E Cisco Catalyst WS-C4503- E Chassis Cisco Catalyst WS-C4506- E Chassis Cisco Catalyst WS- C4507R+E Chassis Cisco Catalyst WS- C4510R+E Chassis Cisco Catalyst WS- C4507R-E Chassis Cisco Catalyst WS- C4510R-E Chassis 6Gbps/Slot 24Gbps/Slot 24Gbps/Slot 48Gbps/Slot 6Gbps/Slot 24Gbps/Slot 24Gbps/Slot 48Gbps/Slot 6Gbps/Slot 24Gbps/Slot 24Gbps/Slot 48Gbps/Slot 6Gbps/Slot Not supported 24Gbps/Slot 48Gbps/Slot 6Gbps/Slot 24Gbps/Slot 24Gbps/Slot 24Gbps/slot 6Gbps/Slot Not supported 24Gbps/Slot 24Gbps/slot The Cisco Catalyst 4500 Series has flexible interface types and port densities that allow network configurations to be mixed and matched to meet the specific needs of campus networks (Table 3). Table 3. Cisco Catalyst 4500 Series Port Densities Cisco Catalyst 4500 Series Switching Modules Number of Interfaces Supported per Line Card Cisco Catalyst 4503-E Cisco Catalyst 4506-E Cisco Catalyst 4507R+E Cisco Catalyst 4510R+E Switched 10/100 Fast Ethernet (RJ-45) Switched 10/100 Fast Ethernet (RJ-45) with IEEE 802.3af at Power over Ethernet (PoE/PoEP) Switched 100 FX Fast Ethernet (MT-RJ) Switched 1000BASE-X (fiber) 6, 18, or Switched 10/100/1000BASE-T Gigabit Ethernet Switched 10/100/1000BASE-T Gigabit Ethernet with IEEE 802.3af at PoE/PoEP Switched 10 Gigabit Ethernet 6 or Configuration Flexibility and Modular Superiority Cisco Catalyst 4500 Series line cards can be mixed and matched to suit numerous LAN access, server connectivity, SMB, or branch-office deployments. The Cisco Catalyst 4500 Series supports the following line cards, listed in Table 4 by part number. Table 4. Cisco Catalyst 4500 Series Line Cards Product Number Description Cisco Catalyst 4500E Series Line Cards WS-X4748-RJ45V+E WS-X4712-SFP+E WS-X4624-SFP-E WS-X4612-SFP-E Cisco Catalyst 4500E Series 48-Port 802.3at PoEP 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 12-port 10 Gigabit Ethernet (SFP+) Cisco Catalyst 4500E Series 24-port GE (SFP) Cisco Catalyst 4500E Series 12-port GE (SFP) 6 WS-C4507R-E and WS-C4510R-E chassis support up to 34 switched 10 Gigabit Ethernet ports Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 12

7 Data Sheet Product Number WS-X4648-RJ45V-E WS-X4648-RJ45V+E WS-X4606-X2-E WS-X4648-RJ45-E Description Cisco Catalyst 4500E Series 48-Port PoE 10/100/1000(RJ45) Cisco Catalyst 4500E Series 48-Port Premium PoE 10/100/1000(RJ45) Cisco Catalyst 4500E Series 6-Port 10GE (X2) Cisco Catalyst 4500E Series 48-Port Data 10/100/1000(RJ45) Cisco Catalyst 4500 Classic 10/100 Line Cards WS-X4148-RJ WS-X4248-RJ45V Cisco Catalyst /100 Auto Module, 48-Port (RJ-45) Cisco Catalyst 4500 PoE 802.3af 10/100, 48-Port (RJ-45) Cisco Catalyst 4500 Classic 10/100/1000 Line Cards WS-X4548-GB-RJ45 WS-X4548-RJ45V+ WS-X4548-GB-RJ45V Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) Cisco Catalyst Port 802.3af PoE and 802.3at PoEP 10/100/1000 (RJ-45) Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45) Cisco Catalyst 4500 Classic 100 BASE-X FE Line Cards WS-X4248-FE-SFP Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-X (SFP) Cisco Catalyst 4500 Classic 1000 BASE-X GE Line Cards WS-X4306-GB WS-X4506-GB-T WS-X4418-GB WS-X4448-GB-SFP Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) Cisco Catalyst Port 10/100/1000 RJ-45 PoE IEEE 802.3af and 1000BASE-X (SFP) Cisco Catalyst 4500 Gigabit Ethernet Module, Server Switching 18 Ports (GBIC) Cisco Catalyst 4500 Gigabit Ethernet Module, 48 Ports 1000X (SFP) Table 5 lists the minimum software requirements for the Cisco Catalyst 4500 supervisor engines. Table 5. Cisco Catalyst Supervisor Engine Software Minimum Requirements Chassis Supervisor Engine Minimum Software Requirement Cisco WS-C4503-E and WS-C4506-E Cisco WS-C4507R+E Cisco WS-C4510R+E Cisco WS-C4507R-E Cisco WS-C4510R-E Supervisor Engine V-10GE Supervisor Engine 6-E Supervisor Engine 6L-E Supervisor Engine 7-E Supervisor Engine V-10GE Supervisor Engine 6-E Supervisor Engine 6L-E Supervisor Engine 7-E Supervisor Engine V-10GE Supervisor Engine 6-E Supervisor Engine 7-E Supervisor Engine V-10GE Supervisor Engine 6-E Supervisor Engine 6L-E Supervisor Engine 7-E Supervisor Engine V-10GE Supervisor Engine 6-E Supervisor Engine 7-E Cisco IOS Software Release 12.2(37)SG Cisco IOS Software Release 12.2(40)SG Cisco IOS Software Release 12.2(52)SG Cisco IOS XE Software Release 3.0(1)SG Cisco IOS Software Release 12.2(54)SG Cisco IOS Software Release 12.2(54)SG Cisco IOS Software Release 12.2(54)SG Cisco IOS XE Software Release 3.0(1)SG Cisco IOS Software Release 12.2(54)SG Cisco IOS Software Release 12.2(54)SG Cisco IOS XE Software Release 3.0(1)SG Cisco IOS Software Release 12.2(40)SG Cisco IOS Software Release 12.2(40)SG Cisco IOS Software Release 12.2(52)SG Cisco IOS XE Software Release 3.0(1)SG Cisco IOS Software Release 12.2(40)SG Cisco IOS Software Release 12.2(40)SG Cisco IOS XE Software Release 3.0(1)SG Managing the Catalyst 4500E Series Switch Network Management applications are instrumental in lowering Operating Expenditures (OPEX) while improving network availability by simplifying and automating many of the day-to-day tasks associated with managing an end-toend network Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 12

8 Data Sheet Cisco Network Assistant The Cisco Network Assistant application manages standalone devices from anywhere on your intranet. Using its GUI, you can perform multiple configuration tasks without using command-line interface (CLI) commands. You can apply actions to multiple devices and ports at the same time for VLAN and quality-of-service (QoS) settings, inventory and statistics reports, link and device monitoring, software upgrades, and many other networking features. Cisco Network Assistant simplifies device management by offering an intuitive GUI, alternative modes for configuring network devices, two levels of access, and comprehensive online help. It features two modes of display: device view and topology view. In the device view, the Cisco Catalyst 4500 Series administrator may configure the switch, configure ports on the switch, or configure groups of ports. In the topology view, the administrator may configure VLAN settings, configure EtherChannels, and view a variety of reports on system and network status. CiscoWorks LAN Management Solution CiscoWorks LAN Management Solution (LMS) is an integrated suite of management functionality that simplify the configuration, administration, monitoring, and troubleshooting of Cisco Borderless Networks. Built upon popular Internet-based standards, CiscoWorks LMS enables network operators to manage the network through a browserbased interface that can be accessed anytime from anywhere within the network. The user experience allows for maximum flexibility and quick-and-easy access to management functions and tasks reducing complexity and errorprone tasks typically associated with managing a network. The breadth and depth of device support coupled with day-one device support program ensures that the 4500E Series Switch and the latest Cisco platforms are supported and manageable the day they ship. Once installed, out-of-the-box monitoring and troubleshooting dashboards provide immediate results and actionable information to quickly isolate and fix network problems before they are service impacting. Work centers provide a single place where operators can quickly provision, monitor and manage new Cisco Catalyst 4500E Series Switch value-added network services such as: Cisco EnergyWise, Cisco TrustSec TM, and AutoSmart Ports. Network Analysis Module Cisco NAM 2200 series appliance provides comprehensive operational visibility into Cisco Catalyst 4500 Series Switch deployments. It combines application performance visibility, traffic analysis and troubleshooting, to enable network administrators to effectively manage delivery of converged network services. The visibility provided by NAM allows IT to deliver consistent end-user experience and improve service levels. It also helps to optimize resources with comprehensive analysis of traffic and effective use of intelligent network services such as QoS and Cisco WAAS. In addition, Cisco NAM improves operational efficiency with proactive detection of performance issues and accelerated problem isolation and root-cause analysis Physical Specifications Table 6 lists physical specifications. Table 6. Physical Specifications of Cisco Catalyst 4500 Series Chassis Specification WS-C4503-E WS-C4506-E WS-C4507R+E and WS- C4507R-E WS-C4510R+E and WS- C4510R-E Dimensions (H x W x D) x x in. (31.12 x x cm) x x in. (44.13 x x cm) x x in. (48.74 x x cm) x x in. (61.84 x x cm) Rack units (RU) 7 RU 10 RU 11 RU 14 RU Chassis weight (with fan tray) lb (14.63 kg) lb (18.37 kg) lb (20.19 kg) lb (24.73 kg) Mounting 19- and 23-in. rack compatible (19-in. rack and cable guide hardware included) 19- and 23-in. rack compatible (19-in. rack and cable guide hardware included) 19- and 23-in. rack compatible (19-in. rack and cable guide hardware included) 19- and 23-in. rack compatible (19-in. rack and cable guide hardware included) 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 12

9 Data Sheet Power Supply Indicators and Interfaces Tables 7 and 8 describe power supply indicators and interfaces: Fan cooling: Integrated in hot-insertion/hot-extraction unit Good: Green Fail: Red (faulty) SNMP MIB supported Table 7. Cisco Catalyst 4500E Series Power Supply Specifications (Data Only) Power Supply 1000W AC 1400W AC 1400W DC Triple Input Integrated PoE No (data only) No (data Only) No (data only) Input current (rated) 12A at 100 VAC, 5A at 240 VAC 16A at 100 VAC, 7A at 240 VAC 2x -48 VDC at 15A 1x -48 VDC at 12.5A Output current (data) 12V at 83.4A 3.3V at 12.2A 12V at 113.4A 3.3V at 12.2A 12V at 1360W 3.3V at 40W Output power redundant mode (data) Output power combined mode (data) 1000W + 40W 1360W + 40W 1400W + 40W 1667W 2473W - Heat dissipation 943 Btus per hour 1048 Btus per hour 1048 Btus per hour Holdup time 20 ms 20 ms 20 ms Hot swappable Yes Yes Yes Table 8. Cisco Catalyst 4500E Series Power Supply Specifications (Data and PoE) Power Supply 1300W AC 2800W AC 4200W AC 6000 AC 1400W DC with PEM 2500W AC - Power Shelf Integrated PoE Yes (up to 800W) Yes (up to 1400W) Yes (up to 3855W) Yes (up to 4800W) Up to 7500W (minus the power consumed for data) when connected directly to a DC power plant or 2 external AC power shelves 2500W per power supply; 5000W per shelf (minus the power consumed for data) IEEE 802.3af/at compliant PoE/PoEP Yes Yes Yes Yes Yes Yes Input current (rated) 16A at 100 VAC 7A at 240 VAC 16A at 200 VAC 2x 12A at 100VAC Or 2x 12A at 200VAC 2x 12A at 100VAC Or 2x 16A at 200VAC 31A at -60 VDC (data only) 180A at -48 VDC (PoE) 15A at 200 VAC Output current (data) 12V at 84.7A 3.3V at 12.5A 12V at 113.3A 3.3V at 12.1A 12V at 115.3A 3.3V at 12.5A 12V at 186.9A 3.3V at 12.5A 12V at 120A 3.3V at 10A -52 VDC at 50A (total output per supply) Output current (PoE) -50V at 16.7A -50V at 28A -50V at 77.1A (200V) -50V at 38A (100V) -50V at 100.0A (200V) -50V at 38.5A (120V) 140A at -48/-60 VDC -52 VDC at 50A (total output per supply) Output power redundant mode (data) 1000W + 40W 1360W + 40W 1383W + 40W 2200W + 40W 1360W + 40W Up to 1400W (through DC supply) Output power redundant mode (PoE) 800W maximum per power supply 1400W maximum per power supply 3700W (220V) 1850W (110V) 4800W (220V) 1850W (110V) Up to 7500W (minus the power consumed for data) 2500W per supply (minus the power consumed for data) Output power combined mode (data) 1667W 2473W 2766W 4400W Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 12

10 Data Sheet Power Supply 1300W AC 2800W AC 4200W AC 6000 AC 1400W DC with PEM 2500W AC - Power Shelf Output power combined mode (PoE) 1333W 2333W 6700W (220V) 3360W (110V) 8700W (220V) 3360W (110V) 3800W (100V) - Heat dissipation 1568 Btus per hour 2387 Btus per hour 3580 BTU/hr 2720 BTU/hr Data only: 1591 Btus per hour Data and voice: 2905 Btus per hour 1210 Btus per hour, per power supply Holdup rime 20 ms 20 ms 20 ms 20 ms 4 ms 20 ms Hot swappable Yes Yes Yes Yes Yes Yes Additional notes for Table 7 and 8: Output power is per power supply unless otherwise stated Heat dissipation numbers represent the power-conversion losses of the power supply in operation The number of power devices supported will depend on customer configuration Fan Trays Each Cisco Catalyst 4500E Series and classic Cisco Catalyst 4500 Series chassis uses a single fan tray for cooling. All fan trays are composed of independent fans. If one fan fails, the system will continue to operate without a significant degradation in cooling. The system will detect and notify the user (through LED, command-line interface [CLI], and SNMP) that a fan has failed and the tray needs to be replaced. Cisco Catalyst 4500E Series fans cannot be interchanged with classic Cisco Catalyst 4500 Series fans. The classic Cisco Catalyst 4500 Series chassis needs an E-Series fan tray in order to support the Metro Supervisor Engine 6-E. Fabric-Redundancy Modules (Cisco WS-C4507R+E, WS-C4510R+E, WS-C4507R-E, and WS- C4510R-E Only) The Cisco Catalyst 4500 and 4500E Series redundancy scheme uses removable fabric-redundancy modules on the passive backplane to switch traffic to the active supervisor engine. There is one fabric-redundancy module per line card. Fabric-redundancy modules and redundant clocks ship standard with every Cisco Catalyst 4507R+E, 4507R-E, 4510R+E, and 4510R-E chassis. Fabric-redundancy modules cannot be interchanged between the Cisco Catalyst 4507R+E/4510R+E and 4507R-E/4510R-E chassis. Environmental Conditions The Cisco Catalyst 4500 and 4500E Series require the following conditions: Operating temperature: 32 to 104ºF (0 to 40ºC) Storage temperature: -40 to 167ºF (-40 to 75ºC) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: -60 to 2000 meters (m) Regulatory Standards Compliance Table 9 lists the regulatory standards compliance of the Cisco Catalyst 4500 and 4500E Series. Table 9. Specification Regulatory Standards Compliance Standard Regulatory compliance CE Marking Safety UL CAN/CSA-C22.2 No Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 12

11 Data Sheet Specification EMC Industry EMC, safety, and environmental standards Standard EN IEC TS 001 AS/NZS 3260 FCC Part 15 (CFR 47) Class A ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN EN EN EN EN EN ETS NEBS Level 3 ETS Storage Class 1.1 ETS Transportation Class 2.3 ETS Stationary Use Class 3.1 ETS Telecom (E1) CTR 12/13 CTR 4 ACA TS016 Telecom (T1) FCC Part 68 Canada CS-03 JATE Green Book ROHS Compliance ROHS5 Power and MTBF Information Table 10 gives power and MTBF information for different chassis Table 10. Power and MTBF Info Part Number Max Rated Power (W) Rated MTBF (Hours) WS-C4503-E 60 1,064,279 WS-C4506-E ,119 WS-C4507R+E ,630 WS-C4510R+E ,714 WS-C4507R-E ,896 WS-C4510R-E ,525 Note: All power numbers shown in the table above are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20% lower than the maximum value shown. Ordering Information Table 11 lists the ordering information for chassis, power supplies, supervisor engines, and memory that are commonly used with the Cisco Catalyst 4500 Series Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 12

12 Data Sheet Table 11. Ordering Information Product Number WS-C4503-E WS-C4506-E WS-C4507R-E WS-C4507R+E WS-C4510R-E WS-C4510R+E PWR-C AC PWR-C AC PWR-C ACV PWR-C ACV PWR-C ACV PWR-C ACV PWR-C DC-P PWR-C DC WS-P4502-1PSU PWR-4502 WS-X4013+ Description Cisco Catalyst E-Series 4503 switch (3-slot chassis), fan, no power supply Cisco Catalyst E-Series 4506 switch (6-slot chassis), fan, no power supply Cisco Catalyst E-Series 4507R switch (7-slot chassis), fan, no power supply, redundant supervisor capable Cisco Catalyst E-Series 4507R+E switch (7-slot chassis), fan, no power supply, redundant supervisor capable Cisco Catalyst E-Series 4510R switch (10-slot chassis), fan, no power supply; redundant supervisor capable Cisco Catalyst E-Series 4510R+E switch (10-slot chassis), fan, no power supply; redundant supervisor capable Cisco Catalyst 4500 Series 1000W AC power supply (data only) Cisco Catalyst 4500 Series 1400W AC power supply (data only) Cisco Catalyst 4500 Series 1300W AC power supply (with integrated PoE) Cisco Catalyst 4500 Series 2800W AC power supply (with integrated PoE) Cisco Catalyst 4500 Series 4200W AC power supply (with integrated PoE) Cisco Catalyst 4500 Series 6000W AC power supply (with integrated PoE) Cisco Catalyst 4500 Series 1400W DC power supply with integrated power entry module (PEM) Cisco Catalyst 4500 Series triple input 1400W DC power supply (data only) Cisco Catalyst 4500 Series auxiliary power shelf (2-slot), including 1 PWR-4502 Cisco Catalyst 4500 Series auxiliary power-shelf redundant power supply Cisco Catalyst 4500 Series Supervisor Engine II-Plus WS-X4013+TS Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS, twelve 10/100/1000 PoE (RJ-45) and eight X SFP ports included on supervisor-engine faceplate WS-X GE WS-X4515 WS-X4516 WS-X GE Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE Cisco Catalyst 4500 Supervisor Engine IV Cisco Catalyst 4000 and 4500 Supervisor Engine V Cisco Catalyst 4500 Series Supervisor Engine V-10GE WS-X45-Sup6-E Cisco Catalyst 4500 Series Supervisor Engine 6-E WS-X45-Sup6L-E MEM-C4K-FLD64M MEM-C4K-FLD128M MEM-X45-512MB-E Cisco Catalyst 4500 Series Supervisor Engine 6L-E Compact Flash memory, 64-MB option Compact Flash memory, 128-MB option Cisco Catalyst 4500 Series Supervisor Engine 6-E, 512-MB option Warranty Cisco Catalyst 4500E Series and Cisco Catalyst 4500 switches are covered by the Cisco limited lifetime hardware warranty. For more information, visit Note: If you purchased a Cisco Catalyst 4500 Series chassis before May 1, 2009, it is covered by the Cisco 90-day limited hardware warranty. For more information, visit Cisco Technical Support Services Cisco offers Cisco Technical Support Services to help ensure that your Cisco products operate efficiently, remain highly available, and benefit from current system software to assist you in effectively managing your network service while controlling operational costs. Cisco Technical Support Services provide significant benefits that go beyond what is offered under the Cisco warranty policy Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 12

13 Data Sheet Services available under a Cisco SMARTnet service contract that are not covered under a warranty include the following: Latest software updates Rapid replacement of hardware in next-day, 4-hour, or 2-hour dispatch options Ongoing technical support through Cisco Technical Assistance Center (TAC) Registered access to Tables 12 and 13 list the components and competitive differentiators of Cisco Technical Support Services. Table 12. Technical Support Services: Components Service Feature Overview Software support TAC support Cisco.com Advance hardware replacement Benefits Offers maintenance and minor and major updates for licensed feature set. Downloading new maintenance releases, patches, or updates of Cisco IOS Software helps to enhance and extend the useful life of Cisco devices. Through major software updates it is possible to extend the life of equipment and maximize application technology investments by: Increasing the performance of current functions Adding new capability that, in many cases, requires no additional hardware investment Enhancing network and application availability, reliability, and stability With more than 1000 highly trained customer support engineers, 390 CCIE certifications, and access to 13,000 research and development engineers, Cisco TAC complements your in-house staff with a high level of knowledge in voice, video, and data communications networking technology. Its sophisticated callrouting system quickly routes calls to the correct technology personnel. The Cisco TAC is available 24 hours a day, 365 days a year. This award-winning website provides 24-hour access to an extensive collection of online product and technology information, interactive network-management and troubleshooting tools, and knowledgetransfer resources that can help customers reduce costs by increasing staff self-sufficiency and productivity. Advance replacement and onsite field-engineer options supply fast access to replacement hardware and field resources for installing hardware, minimizing the risk of potential network downtime. Table 13. Feature Technical Support Services: Competitive Differentiators Benefits Worldwide Virtual Lab TAC training Boot camps Tech calls Tech forums Cisco Live Global logistics Cisco IOS Software This extensive lab of Cisco equipment and Cisco IOS Software releases provides an invaluable engineering resource and knowledge base for training, product information, and recreation and testing of selected network issues to help decrease time to resolution. Cisco is committed to providing customers the latest in technology support. These TAC training programs assist customers in case avoidance as well as provide knowledge transfer of Cisco networking expertise. A powerful suite of Internet-enabled tools with firewall-friendly features; these secure, encrypted Java applets can turn a simple phone call into an interactive collaboration session, allowing a customer and Cisco TAC support engineer to work together more effectively. Delivers award-winning, worldwide hardware-replacement support with 650 depots, covering 120 countries, at a US$2.3 billion investment in inventory, using 10,000 onsite field engineers. Employs 100 discrete technologies with more than 2000 features. 400 new features are added each year. Cisco IOS Software is installed in more than 10 million devices and is running on more than 10,000 networks worldwide. It operates on the world s largest IPv6 and VoIP networks and in all major service provider networks worldwide. For More Information To learn more about how you can take advantage of Cisco Technical Support Services, talk to your Cisco representative or visit Cisco Technical Support Services at Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 12

14 Data Sheet For additional information about the Cisco Catalyst 4500 Series, visit For additional information about Cisco products, contact: United States and Canada: NETS (6387) Europe: Australia: Other: Cisco and Partner Services for Next-Generation Cisco Catalyst Modular Switches Enable the borderless network architecture using personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the nextgeneration Cisco Catalyst modular switches into your architecture and incorporate network services onto that platform. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support services designed to meet your business needs and help you maintain high-quality network performance while controlling operational costs. For more information about services from Cisco and our partners, visit Table 14 lists available technical services. Table 14. Available Technical Services Technical Services Cisco SMARTnet Service Around-the-clock, global access to the Cisco Technical Assistance Center (TAC) Unrestricted access to the extensive Cisco.com knowledge base and tools Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available 7 Ongoing operating system software updates within the licensed feature set 8 Proactive diagnostics and real-time alerts on Smart Call Home enabled devices Cisco Smart Foundation Service Next business day advance hardware replacement as available Business hours access to SMB TAC (access levels vary by region) Access to Cisco.com SMB knowledge base Online technical resources through Smart Foundation Portal Operating system software bug fixes and patches Cisco SP Base Service Around-the-clock, global access to the Cisco TAC Registered access to Cisco.com Next business day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available 7 Ongoing operating system software updates 8 Available direct from Cisco only to qualified service providers 7 Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with next business day (NBD) delivery. Where NBD is not available, same day ship is provided. Restrictions apply; please review the appropriate service descriptions for details. 8 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 12

15 Data Sheet Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 12

16 Data Sheet Cisco Catalyst 4500E Supervisor Engine 7-E: Leading Borderless Network Access and Aggregation Supervisor Engine Overview Establishing borderless leadership is now easier than ever to achieve with the new Cisco Catalyst 4500E Supervisor Engine 7-E (Figure 1), an enterprise-class borderless network access and aggregation supervisor engine designed to provide 848 Gbps per system with E-Series chassis. Cisco Catalyst 4500E Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide 48 Gbps per slot with Flexible NetFlow, Advanced Security, combined with reduced total cost of ownership (TCO) and excellent investment protection. With these capabilities, 4 10G uplinks, and /100/1000 PoE (240 ports of PoEP) ports, this supervisor engine is undoubtedly the Cisco leading borderless network access Cisco Catalyst supervisor engine. Supervisor Engine 7-E is built with priceperformance aggregation deployments in mind, providing increased Gigabit Ethernet and 10 Gigabit Ethernet fiber density along with hardware capabilities to support enterprise-class aggregation functionalities. Supervisor Engine 7- E facilitates borderless user experiences for enterprise, public sector, mid-market, and commercial customer deployment business-critical applications. Borderless network leadership is extended with important drivers - Hardware readiness for Cisco TrustSec, medianet, Flexible NetFlow, Cisco EnergyWise - and other feature enhancements enabled by the Cisco Catalyst 4500E Supervisor Engine 7-E. Backward and forward compatibility with most existing Cisco Catalyst 4500 and 4500E line cards assures deeper customer satisfaction with the industry s best investment protection architecture. The Cisco Catalyst 4500E Supervisor Engine 7-E delivers several new technology breakthroughs and industry firsts, extending the Cisco Catalyst 4500 Series placement from premium wiring closet solution into next-generation borderless access and aggregation deployments. The Supervisor Engine 7-E offers the following key leading innovations and capabilities: Enables 10+ years of investment protection through backward and forward compatibility First Cisco Catalyst switch with 48 Gbps per slot (848 G per system) Enables around 5 microseconds of latency to and from any 10G port First Cisco Catalyst switch with campus Flexible NetFlow (FNF) First Cisco Catalyst switch offering Cisco IOS XE Software services First Cisco Catalyst switch with less than 10ms ISSU high availability First and only modular switch with 8 bi-directional SPAN and/or RSPAN sessions 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 1

17 Data Sheet Figure 1. Cisco Catalyst 4500E Supervisor Engine 7-E Cisco Catalyst 4500E Supervisor Engine 7-E Feature Highlights The Cisco Catalyst 4500E Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide nonblocking 48 Gbps per slot bandwidth and Flexible NetFlow for optimized application visibility. In addition to this, the enterprise-class Cisco Catalyst 4500E Supervisor Engine 7-E offers the following: Performance/Scalability 848 Gbps switching capacity with 250 Mpps of throughput 4 nonblocking 10 Gigabit Ethernet uplinks [SFP+] SFP support on uplinks to offer flexibility for up to 4 Gigabit Ethernet 384 ports of nonblocking 10/100/1000 PoEP (30W) capabilities on all ports in a line card simultaneously 196 ports of nonblocking Gig SFP 100 ports of 10G SFP+ (4 Uplinks ports + 96 Linecard ports) 128K Flexible NetFlow entries in hardware External USB and SD card support for flexible storage options 256K Routing Entries for high-end campus access and aggregation deployments IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks Dynamic hardware forwarding-table allocations for ease of IPv4-to-IPv6 migration Scalable routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, and ACL and QoS entries to make sure of 8 queues per port and comprehensive security policies per port Infrastructure Services Cisco IOS XE Software, the modular open application platform for virtualized borderless services Maximum resiliency with redundant components, Nonstop Forwarding/Stateful Switchover (NSF/SSO), and In-Service Software Upgrade (ISSU) support Network virtualization through Multi-VRF technology for Layer 3 segmentation 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 12

18 Data Sheet Automation through Embedded Event Manager (EEM), Cisco Smart Call Home, AutoQoS, and Auto SmartPorts for fast provisioning, diagnosis, and reporting Borderless Network Services Optimized application performance through deep visibility with Flexible Netflow supporting rich Layer 2/3/4 information (MAC, VLAN, TCP Flags) and synthetic traffic monitoring with IP SLA Medianet capabilities to simplify video quality of service, monitoring, and security Energy efficient design with Cisco EnergyWise technology to manage network, PoEP, and PC Investment Protection and Reduced TCO Full backward compatibility with 6 G, 24 G, and 48 Gbps slot line cards with no performance degradation The Cisco Catalyst 4500E Supervisor Engine 7-E is compatible with classic Cisco Catalyst 4500 line cards, and power supplies, providing full investment protection. Supervisor Engine 7-E is not compatible with classic Catalyst 4500 chassis. When you deploy the Cisco Catalyst 4500E Supervisor Engine 7-E with classic line cards, all of the new features except the 24 Gbps and 48 Gbps per-slot switching capacity are inherited. Predictable Performance and Scalability The Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide 48 Gbps per slot switching capacity. Table 1 highlights the performance and scalability enhancements of the Cisco Catalyst 4500E Supervisor Engine 7-E. Table 1. Cisco Catalyst 4500E Supervisor Engine 7-E Performance and Scalability Features Feature and Description Supervisor Engine 7-E Centralized Switching Capacity Per-Slot Switching Capacity Throughput 848 Gbps 48 Gbps 250 Mpps for IPv4 125 Mpps for IPv6 IPv4 Routing Entries 256,000 IPv6 Routing Entries 128,000 Multicast Routes CPU 32,000 (Available with Cisco IOS XE Software Release SG) Dual Core 1.5 GHz CPU Queues 64 Synchronous Dynamic RAM (SDRAM) NVRAM 2 GB upgradable to 4 GB 1G Security and QoS Hardware Entries 128,000 Cisco Network Admission Control (NAC) and Dynamic Host Configuration Protocol (DHCP) Snooping Entries 12,000 MAC addresses 55,000 Active VLANs 4,096 Spanning Tree Protocol Instances 10,000 Switched Virtual Interfaces (SVIs) 4,096 Switched Port Analyzer (SPAN) Maximum of 8 sessions: ingress and/or egress The Supervisor Engine 7-E is also optimized for multimedia applications with its advanced multicast support offered by features such as Protocol Independent Multicast (PIM) and Source-Specific Multicast (SSM), giving your network additional scalability to support multimedia applications Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 12

19 Data Sheet Continued Innovations Through Infrastructure Services Modular Open Application Platform, Cisco IOS XE Software Cisco IOS XE Software is the next generation operating system for the Cisco Catalyst 4500E Supervisors, beginning with the Supervisor 7-E. Cisco continues to evolve Cisco IOS Software to support next-generation switching hardware and provide increased architectural flexibility to deliver quick adoption of future Cisco Borderless Networks services, while making sure of customer investment protection in Cisco IOS Software. Cisco IOS XE Software provides the following customer benefits: Cisco IOS XE Software provides a modern operating system that can take advantage of the multicore CPU architecture of the next generation Cisco Catalyst 4500 system with Supervisor 7-E. Cisco IOS XE Software makes sure of customer investment protection in the existing Cisco IOS Software. With Cisco IOS XE Software, today s Cisco IOS Software becomes a Cisco IOS Software package with a consistent feature set and operational look and feel. This allows a transparent migration experience. Cisco IOS XE Software supports service virtualization capability that allows the Cisco Catalyst 4500 to host applications other than Cisco IOS Software, customer written applications, or third-party applications in parallel with Cisco IOS Software. The hosted application can communicate with Cisco IOS Software to use its rich feature sets. This benefit allows a customer to quickly adopt new technologies using proven code, while keeping Cisco IOS Software simple and robust. Cisco IOS XE Software enables Cisco Catalyst 4500 to be an open service platform and is a primary anchor to enable future Cisco Borderless Networks innovations. Best-in-Class Resiliency The Cisco Catalyst 4500E Series was designed for excellent nonstop communications with noninterrupted hardware switching. With Cisco IO XE Software customers continue to reap the benefit of this best-in-class resiliency in various ways. ISSU allows you to upgrade or downgrade complete Cisco IOS Software images with minimal (10msec) to no disruption to the network when using a redundant Cisco Catalyst 4500E Series system with dual supervisor engines 7-E. Facilitating rapid, nondisruptive software upgrade for new line cards, new power supplies, new features, or bug fixes, ISSU offers continuous packet forwarding during the supervisor-engine switchover running different Cisco IOS Software releases. NSF/SSO offers continuous packet forwarding during supervisor-engine switchover. Information is fully synchronized between supervisor engines to allow the standby supervisor engine to immediately take over in subsecond time if the primary fails. NSF/SSO and ISSU dramatically improve the network reliability and availability in a Layer 2 or Layer 3 environment. NSF/SSO and ISSU are essential for business-critical applications such as voice over IP (VoIP). These features help ensure that VoIP calls are not dropped. In addition to redundant power supplies, fans, and clock modules, the Cisco Catalyst 4510R+E, 4507R+E, 4510R-E, and 4507R-E chassis models support supervisor-engine redundancy, using the Supervisor Engine 7-E. The primary supervisor engine is active and is responsible for normal system operation. The secondary supervisor engine serves as a secondary standby, monitoring the operation of the primary supervisor engine. The resiliency features of the Cisco Catalyst 4500 prevent network outages that could result in lost business and revenue. Apart from the above, Supervisor Engine 7-E has resiliency built into its uplinks. Figure 2 shows the uplink options on Supervisor Engine 7-E Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 12

20 Data Sheet Figure 2. High-Availability and Uplink Options for Supervisor Engine 7-E Simplified Operations Through Automation As campus switching has grown to support increasing enterprise demands, so has the need to deploy and manage new and evolving technologies. Simplified operations are critical in meeting these challenges and achieving increased operational efficiency through proactive management and reduction in unplanned network downtime. The Cisco Catalyst Supervisor Engine 7-E offers the following rich set of capabilities for simplified operations: Auto Install and AutoQoS for fast deployment Config Rollback for improved config management EEM, Smart Call Home, GOLD, TDR for simplified operations Flexible NetFlow and IP SLA for enhanced visibility Cisco EnergyWise for simplified power management ISSU for simplified change management Optimized Application Visibility with Flexible NetFlow Cisco IOS Flexible NetFlow is the next generation in flow technology, allowing optimization of the network infrastructure, reducing operation costs, improving capacity planning and security incident detection with increased flexibility and scalability. The Cisco Catalyst 4500E Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide optimized application visibility with Flexible NetFlow with a capability of 128K Flexible NetFlow Entries. The Supervisor Engine 7-E, with custom-built ASIC, delivers next-generation flow technology with unprecedented flexibility and comprehensive visibility extending from Layer 2 (MAC, VLAN) to Layer 4 (TCP, UDP flags, and so on). The flow data collected by Flexible NetFlow can be exported to external collector for analysis and reporting, or tracked by Embedded Event Manager (EEM).The Cisco Catalyst 4500E Supervisor Engine 7-E enables powerful, on-box and customizable event correlation and policy actions with EEM. This allows the switches to trigger customized event alarms or policy actions when the predefined condition is met. With no external appliance required, customers are able to use existing infrastructure to perform traffic monitoring, making traffic analysis economical even on large IP network. Details on Cisco Flexible NetFlow are available at 04b590b.html Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 12

21 Data Sheet Investment Protection with Chassis and Line Card Support Already-installed Cisco Catalyst 4500E chassis with classic and E-Series line cards can take advantage of the new features and functions of the Supervisor Engine 7-E on all ports with a simple supervisor-engine upgrade. However, to take advantage of the increased switching capacity of 48 Gbps per slot, the Cisco Catalyst 4500E Series chassis (including R+E chassis) and the select new E-Series line cards are required. You can mix and match Cisco Catalyst 4500E Series line cards and classic line cards in an E-Series chassis with no performance degradation to either linecard type. Table 2 shows the supervisor-engine and line-card slot-assignment options in the Cisco Catalyst 4500E Series chassis. Table 2. Cisco Catalyst 4500E Chassis Slot-Assignment Options Chassis Single Supervisor Engine 7-E Slot Assignments Redundant Supervisor Engine 7-E Slot Assignments E-Series Line-Card Slot Options Classic Line-Card Slot Options Cisco Catalyst 4503-E Slot 1 - Slots 2 and 3 Slots 2 and 3 Cisco Catalyst 4506-E Slot 1 - Slots 2 through 6 Slots 2 through 6 Cisco Catalyst 4507R+E Slot 3 or 4 Slots 3 or 4 Slots 1, 2, and 5 to 7 Slots 1, 2, and 5 to 7 Cisco Catalyst 4510R+E Slots 5 or 6 Slots 5 or 6 Slots 1 to 4, and 7 to 10 Slots 1 to 4, and 7 to 10 Cisco Catalyst 4507R-E Slot 3 or 4 Slots 3 or 4 Slots 1, 2, and 5 to 7 Slots 1, 2, and 5 to 7 Cisco Catalyst 4510R-E Slots 5 or 6 Slots 5 or 6 Slots 1 to 4, and 7 to 10 Slots 1 to 4, and 7 to 10 Table 3 summarizes the performance capacities of the Supervisor Engine 7-E on a per-chassis basis. Table 3. Cisco Catalyst 4500 Supervisor Engine 7-E Bandwidth per slot for different Chassis Cisco Catalyst 4503-E Chassis Cisco Catalyst 4506-E Chassis Cisco Catalyst 4507R+E Chassis Cisco Catalyst 4510R+E Chassis Cisco Catalyst 4507R-E Chassis Cisco Catalyst 4510R-E Chassis Supervisor Engine 7-E (WS-X45-Sup 7-E) 48Gbps/Slot 48 Gbps/Slot 48 Gbps/Slot 48 Gbps/Slot 24 Gbps/Slot 24 Gbps/Slot IPv6 Support IPv6 is important for the future of IP networking and is critical for the expansion of IP address space in the future. IPv6 capability is required by many companies and is being mandated by governments worldwide. The Cisco Catalyst 4500 Supervisor Engine 7-E supports IPv6 Unicast and Multicast in hardware for full line-rate forwarding performance of up to 125 Mpps. The Supervisor Engine 7-E also dynamically allocates hardware table space between IPv4 and IPv6 routes to maximize tablespace usage for optimal IPv4-to-IPv6 migration The Supervisor Engine 7-E supports Multicast Listener Discovery (MLD) Snooping for IPv6, enhancing performance and reducing network traffic by allowing a switch to dynamically add and remove hosts from a multicast group. Table 4 highlights the IPv6 capabilities of the Supervisor Engine 7-E. Table 4. Summary of Supervisor Engine 7-E IPv6 Capabilities Feature and Description Supervisor Engine 7-E IPv6 Support IPv6 Performance Unicast and Multicast forwarding done in hardware 125 Mpps IPv6 Routing Entries 128,000 Dynamic Hardware Route Table Allocations MLD Snooping for IPv6 urpfv6: Strict Mode Yes Yes, in hardware Yes, in hardware 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 12

22 Data Sheet Features at a Glance Cisco IOS XE Software LAN Base: Feature set on the Supervisor 7-E based bundles. Focused on providing Layer 2 features for access. Cisco IOS XE Software IP Base: Upgradable with a software activation license (SAL). Includes all Layer 2 features and some basic Layer 3 features. ISSU/SSO is supported in this package. Cisco IOS XE Software Enterprise Services: Upgradable with a SAL; supports full Layer 3 protocols and advanced features such as complete routing scalability (256K), BGP, Virtual Routing and Forwarding, Policy-Based Routing, and so on. These features can be enabled using the software-licensing mechanism. For details on software licensing, see "Licensing" section later in this document or visit For details on the supported features in above 3 images see Cisco IOS XE SG Release Notes below. Industry Standards Ethernet: IEEE Gigabit Ethernet: IEEE 802.3ae 10GBASE-R (SFP+) IEEE D Spanning Tree Protocol IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE s Multiple VLAN Instances of Spanning Tree IEEE ad LACP IEEE p CoS Prioritization IEEE 802.1Q VLAN IEEE X User Authentication RMON I and II standards Supported Cisco Catalyst 4500E Series Line Cards and Modules WS-X4748-RJ45V+E: Cisco Catalyst 4500E 48-Port PoE 802.3at 10/100/1000 (RJ45) WS-X4712-SFP+E: Cisco Catalyst 4500E Series 12-Port 10GbE (SFP+) WS-X4648-RJ45V-E: Cisco Catalyst 4500E Series, 48-port 802.3af PoE 10/100/1000 (RJ-45) WS-X4648-RJ45V+E: Cisco Catalyst 4500E Series 48-Port Premium PoE 10/100/1000 (RJ-45) WS-X4648-RJ45-E: Cisco Catalyst 4500E Series, 48-port 10/100/1000 (RJ-45) WS-X4606-X2-E: Cisco Catalyst 4500E Series, 6-port 10 Gigabit Ethernet (X2) WS-X4624-SFP-E: Cisco Catalyst 4500E Series 24-Port GE (SFP) WS-X4612-SFP-E: Cisco Catalyst 4500E Series 12-port GE (SFP) CVR-X2-SFP: Twin gigabit converter module 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 12

23 Data Sheet Supported Cisco Catalyst 4500 Classic Line Cards and Modules WS-X4148-FE-BD-LC: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-BX-D SMF (LC) WS-X4124-FX-MT: Cisco Catalyst 4000 Fast Ethernet Switching Module, 24-port 100BASE-FX (MT-RJ) WS-X4148-FX-MT: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-FX multimode fiber (MMF) WS-X4124-RJ45: Cisco Catalyst /100 Module, 24 ports (RJ-45) WS-X4148-RJ: Cisco Catalyst /100 Module, 48 ports (RJ-45) WS-X4148-RJ21: Cisco Catalyst /100 Module, 48-port telco (4 x RJ-21) WS-X4248-RJ21V: Cisco Catalyst 4500 PoE 802.3af 10/100, 48 ports (RJ-21) WS-X4224-RJ45V: Cisco Catalyst 4500 PoE 803.3af 10/100, 24 ports (RJ-45) WS-X4248-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100, 48 ports (RJ-45) WS-X4248-FE-SFP: Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-port 100BASE-X (SFP) WS-X4232-GB-RJ: Cisco Catalyst Port 10/100 (RJ-45), 2 Gigabit Ethernet (GBIC) modules WS-X4302-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, 2 ports (GBIC) WS-X4306-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, 6 ports (GBIC) WS-X4506-GB-T: Cisco Catalyst 4500 Gigabit Ethernet Module, 6 ports 10/100/ af PoE or 1000BASE-X (SFP) WS-X4418-GB: Cisco Catalyst 4500 Gigabit Ethernet Module, server switching 18 ports (GBIC) WS-X4448-GB-SFP: Cisco Catalyst 4500 Gigabit Ethernet Module, 48 ports 1000BASE-X (optional SFPs) WS-X4424-GB-RJ45: Cisco Catalyst Port 10/100/1000 Module (RJ-45) WS-X4448-GB-RJ45: Cisco Catalyst Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45: Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4524-GB-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100/1000, 24 ports (RJ-45) WS-X4548-GB-RJ45V: Cisco Catalyst 4500 PoE 802.3af 10/100/1000, 48 ports (RJ-45) WS-X4548-RJ45V+: Catalyst 4500 PoE+ Ready 10/100/1000, 48-Port (RJ45) Supported Pluggables 10 Gbps Optics: SFP-10G-SR: Cisco 10GBASE-SR SFP+ Module for MMF SFP-10G-LRM: 10GBASE-LRM SFP+ transceiver module for MMF and SMF, 1310-nm wavelength, LC duplex connector SFP-H10GB-CU1M: 1-m 10G SFP+ Twinax cable assembly SFP-H10GB-CU3M: 3-m 10G SFP+ Twinax cable assembly SFP-H10GB-CU5M: 5-m 10G SFP+ Twinax cable assembly 1 Gbps Optics: GLC-BX-D: 1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength GLC-BX-U: 1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength GLC-SX-MM: 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength GLC-LH-SM: 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 12

24 Data Sheet For details about the different optical modules and the minimum Cisco IOS Software release required for each of the supported optical modules, visit Software Requirements The Cisco Catalyst 4500 Series Supervisor Engine 7-E is supported only in Cisco IOS Software and is not supported in the Cisco Catalyst Operating System Software. The minimum software versions are as follows: Supervisor Engine 7-E, Cisco IOS XE Software Release SG Environmental Conditions Operating temperature: 32 to 104ºF (0 to 40ºC) Storage temperature: -40 to 167ºF (-40 to 75ºC) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: -60 to 2000m Power and MTBF Information Active Supervisor Power = 280W Standby Supervisor Power = 224W The above figure is not indicative of the actual power draw during operation. This is the absolute maximum value recommended for facility power and cooling capacity planning. Typical power draw is about 20% lower than the maximum value shown. MTBF = 155,241 Hours Regulatory Standards Compliance Table 5 shows regulatory standards compliance information, and Table 6 provides ordering information. Table 5. Specification Cisco Catalyst 4500 Supervisor Engine 7-E Regulatory Standards Compliance Standard Regulatory Compliance CE marking Safety UL 60950CAN/CSA-C22.2 No EN IEC TS 001 AS/NZS 3260 EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A ETS EN EN EN EN EN EN Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 12

25 Data Sheet Specification Industry EMC, Safety, and Environmental Standards ROHS Compliance Standard GR-63-Core Network Equipment Building Standards (NEBS) Level 3 GR-1089-Core Level 3 ETS Storage Class 1.1 ETS Transportation Class 2.3 (pending) ETS Stationary Use Class 3.1 ETS ROHS5 Table 6. Ordering Information Product Number WS-X45-SUP7-E WS-C4510RE-S7+96V+ S45U-31-01XO S45ULK XO C4500E-LB C4500E-IPB C4500E-LIC= C4500E-LB-IPB C4500E-LB-ES C4500E-IP-ES Description Cisco Catalyst 4500E Series Supervisor, 848 Gbps 4510R+E Chassis, Two WS-X4748-RJ45V+E, Sup7-E Cisco Catalyst 4500 Supervisor Engine 7-E Cisco IOS Software XE release SG non-crypto universal image Cisco Catalyst 4500 Supervisor Engine 7-E Cisco IOS Software XE release SG crypto universal LAN BASE software license IP BASE software license Base product ID for paper delivered software upgrade licenses LAN BASE to IP BASE upgrade license (paper delivery) LAN BASE to Enterprise Services upgrade license (paper delivery) IP BASE to Enterprise Services upgrade license (paper delivery) C4500E-LIC-PAK Base product ID for paper delivered software licenses for spare Supervisor Engine 7-E C4500E-IP-ES-S C4500E-IPB-S L-C4500-LIC= L-C4500E-LB-IP L-C4500E-IP-ES L-C4500E-LB-ES IP BASE to Enterprise Services upgrade license for spare Supervisor Engine7-E (paper delivery) IP BASE software license for spare Supervisor Engine 7-E (paper delivery) Base product ID for electronically delivered software upgrade licenses LAN BASE to IP BASE upgrade license (electronically delivered) IP BASE to Enterprise Services upgrade license (electronically delivered) LAN BASE to Enterprise Services upgrade license (electronically delivered) SD-X45-2GB-E Cisco Catalyst GB SD Memory Card for Sup 7-E USB-X45-4GB-E Cisco Catalyst GB USB device for Sup 7-E Licensing Software Activation Licensing Software activation licensing will be introduced to the Cisco Catalyst 4500E platform with the Supervisor 7-E. Each Supervisor 7-E will ship with a universal image containing all feature sets, LAN Base, IP Base, and Enterprise Services. The level of functionality is determined by the license applied. Software activation licensing enables customers to: Speed deployment and roll out new Cisco software activation feature sets across customers' global networks Centrally and more accurately manage and track software and license compliance Easily conduct software compliance audits to meet regulations without affecting network operations Operational Simplicity: Simplified upgrades and license transfers save time and improve productivity; you can add new capabilities simply by using a license file You can easily track software assets, licenses, and feature set status A single software image improves service delivery 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 12

26 Data Sheet Ease of Ordering: "Try and buy" lets you use a temporary license to try and evaluate new Cisco IOS Software functionality before purchase Pay-as-you-grow software key enables new features incrementally without service calls For more information about Cisco software licensing, visit Warranty Cisco Catalyst 4500E Series and Cisco Catalyst 4500 switches are covered by the Cisco limited lifetime hardware warranty. For more information, see Cisco Technical Support Services Cisco Technical Support Services (Tables 7 and 8) help to ensure that your products from Cisco operate efficiently, remain highly available, and benefit from current system software to assist you in effectively managing your network service while controlling operational costs. Cisco Technical Support Services provide significant benefits that go beyond what is offered under the Cisco warranty policy. Services available under a Cisco SMARTnet service contract that are not covered under a warranty include the following: Latest software updates Rapid replacement of hardware in next-day, 4-hour, or 2-hour dispatch options Ongoing technical support through the Cisco Technical Assistance Center (TAC) Registered access to Table 7. Components of Cisco Technical Support Services Service Feature Overview Software Support Benefit or Advantage Software support offers maintenance and minor and major updates for licensed feature sets. Downloading new maintenance releases, patches, or updates of Cisco IOS Software helps to enhance and extend the useful life of Cisco devices. Through major software updates, it is possible to extend the life of equipment and maximize application technology investments by: Adding new functions that, in many cases, require no additional hardware investment Increasing the performance of current functions Enhancing network or application availability, reliability, and stability Cisco TAC Support With more than 1000 highly trained customer support engineers, 390 CCIE experts, and access to 13,000 R&D engineers, Cisco TAC complements your in-house staff with a high level of knowledge in data, voice, and video communications networking technology. Its sophisticated call-routing system quickly routes calls to the correct technology personnel. The Cisco TAC is available 24 hours a day, 365 days a year. Cisco.com Advance Replacement of Hardware This award-winning Website provides 24-hour access to an extensive collection of online product and technology information, interactive network management and troubleshooting tools, and knowledge-transfer resources that can help customers reduce costs by increasing staff self-sufficiency and productivity. Advance Replacement and onsite field engineer options supply fast access to replacement hardware and field resources for installing hardware, minimizing the risk of potential network downtime. Table 8. Cisco Technical Support Services: Competitive Differentiators Service Feature Overview Worldwide Virtual Lab Cisco TAC Training Boot camps Benefit or Advantage This extensive lab of Cisco equipment and Cisco IOS Software versions provides an invaluable engineering resource and knowledge base for training, product information, and recreation and testing of selected network problems to help decrease time to resolution. Cisco is committed to providing customers the latest in technology support. These TAC training programs assist customers in case avoidance and provide knowledge transfer of Cisco networking expertise. Tech calls Tech forums 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 12

27 Data Sheet Service Feature Overview Cisco Live Benefit or Advantage A powerful suite of Internet-enabled tools with firewall-friendly features, these secure, encrypted Java applets can turn a simple phone call into an interactive collaboration session, allowing a customer and Cisco TAC support engineer to work together more effectively. Global Logistics This feature delivers award-winning, worldwide hardware-replacement support with 650 depots, covering 120 countries, at a $2.3 billion investment in inventory, taking advantage of 10,000 onsite field engineers. Cisco IOS Software Cisco IOS Software employs 100 discrete technologies with more than 2000 features. Each year 400 new features are added. Cisco IOS Software is installed in more than 10 million devices and is running on more than 10,000 networks worldwide. It operates on the world s largest IPv6 and VoIP networks and in all major service provider networks worldwide. For More Information To learn more about how you can take advantage of Cisco Technical Support Services, talk to your Cisco representative or visit Cisco Technical Support Services at For additional information about the Cisco Catalyst 4500, visit For additional information about Cisco products, contact: United States and Canada: NETS (6387) Europe: Australia: Other: Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 12

28 Data Sheet Cisco Catalyst 4500E Series Power over Ethernet Capabilities and Power Supplies Power over Ethernet on the Cisco Catalyst 4500E Series Platform The Cisco Catalyst 4500E Series platform offers line cards, power supplies, and accessories to support 15.4W per port simultaneously on every port in any fully loaded Cisco Catalyst 4500E Series switch. Although all references to Power over Ethernet (PoE), inline power, and voice power supply and line cards are synonymous. There are four versions: Cisco prestandard PoE, 802.3af-compliant PoE, 802.3at-compliant PoEP (30W), and Universal POEP (UPOE) (60W). Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the Cisco prestandard PoE, the IEEE 802.3af standard PoE, and IEEE 802.3at-compliant PoEP power implementation, helping ensure backward compatibility with existing Cisco powered devices. PoEP is standard on the Cisco Catalyst 4500E Series platform. UPOE requires Cisco Catalyst 4500E Series chassis. All Cisco Catalyst 4500 Series PoE line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface card (NIC) to help ensure that power is applied only when an appropriate device is connected. With a Cisco PoE network, administrators can depend on a robust network that is safe to deploy and simple to maintain. PoE(P) PoE is the capability to provide up to 15.4W of power over 100m of standard Category 3 (or better) unshielded twisted-pair (UTP) cables when an IEEE af-compliant or Cisco prestandard powered device is attached to the PoE line-card port. Instead of requiring wall power, attached devices such as IP phones, wireless base stations, video cameras, and other IEEE-compliant appliances can use power provided from the Cisco Catalyst 4500 Series PoE line cards. This capability gives network administrators centralized control over power and eliminates the need to install outlets in ceilings and other out-of-the-way places where a powered device can be installed. When a switch is connected to an uninterruptible-power-supply (UPS) system, network administrators can help ensure that power outages will not affect network availability. IEEE 802.3at-compliant PoEP extends the Power over Ethernet capability to up to 30W over 100m of Category 5e (or better) unshielded twisted-pair (UTP) cables. UPOE Universal POEP is an enhancement to the PoEP (802.3at) standard to allow powered devices up to 60W to connect over a single Cat 5e cable. Standard PoEP uses only 2 twisted pairs (out of 4) in the Ethernet cable. UPOE uses all 4 twisted pairs to deliver 60W to the port. The additional power UPOE offers over standard PoE extends the advantages of PoE to next-generation powered workspace devices such as virtual desktop displays, workgroup switches, and physical access controllers. All Cisco Catalyst 4500E Series UPOE line cards support standard PoE as well as Cisco prestandard PoE. When deploying UPOE devices, Cat5e (or better) unshielded twisted-pair (UTP) cable is recommended Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 1

29 Deploying PoE on the Cisco Catalyst 4500E Series PoE deployment is extremely easy on the Cisco Catalyst 4500E Series platform. All Cisco Catalyst 4500 Series PoE line cards automatically detect and power all attached powered devices. Moreover, the Cisco Catalyst 4500 Series returns unused port power to the system power budget for use by other devices because it supports the IEEE 802.3af optional power classifications. Finer granularity for the budgeted power is achieved on Cisco power devices that support Cisco Discovery Protocol. The Cisco Catalyst 4500E Series offers internal power supplies and external power devices for multiple deployment scenarios, including small and large deployments in AC or DC environments for data-only configurations, and scalability up to 60W per port for PoE, PoEP, and UPOE configurations. All the Cisco Catalyst E-Series Chassis models share a common power-supply form factor. Each Cisco Catalyst 4500 Series chassis is designed for power protection while meeting the needs of PoE demands. In addition to power resiliency, the Cisco Catalyst 4500 Series includes supervisor-engine redundancy (Cisco Catalyst 4507R+E/4507R-E and 4510R+E/4510R-E models only) and software-based fault tolerance. Integrated resiliency in both hardware and software minimizes network downtime, helping ensure workforce productivity, profitability, and customer success. Table 1 gives an overview of IEEE 802.3af power classifications. Table 1. Overview of IEEE 802.3af Power Classifications (Measured at the Switch Port) IEEE Class Power Available at the Switch Port W: Default class 1 4W 2 7W W 4 Up to 30W via L2 negotiation (PoEP) 4 enhanced Up to 60W via LLDP negotiation (UPOE) Cisco prestandard PoE 6.3W Comparison Between Cisco Prestandard PoE, 802.3af-Compliant PoE, and 802.3at-Compliant PoE From a power perspective, there are several significant differences between the Cisco prestandard, 802.3afcompliant and 802.3at-compliant line cards. The differences are illustrated by comparing the total number of PoE devices supported by the Cisco prestandard inline power line card, the af-compliant, and the 802.3atcompliant line cards (Table 2). Table 2. Number of Powered Devices Supported When Using Power Supplies in a Mode Using IEEE 802.3af- Compliant Line Cards Standard 802.3af Class 1 (4W per Port) Standard 802.3af Class 2 (7W per Port) Standard 802.3af Classes 0 and 3 (15.4W per Port) Standard 802.3at Class 4 (PoEP) (30W per Port) UPOE (60W per port) 1000 WAC WAC WDC WDC (triple input) Cisco Prestandard (6.3W per Port) 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 11

30 Standard 802.3af Class 1 (4W per Port) Standard 802.3af Class 2 (7W per Port) Standard 802.3af Classes 0 and 3 (15.4W per Port) Standard 802.3at Class 4 (PoEP) (30W per Port) UPOE (60W per port) 1300 WAC WAC WAC WAC Cisco Prestandard (6.3W per Port) Cisco Catalyst 4500E Series Power-Supply Options: AC and DC The Cisco Catalyst 4500E Series offers a variety of power supplies and accessories to meet the diverse needs of enterprise and service provider customers. All available Cisco Catalyst 4500 Series power supplies can be used for data-only deployments, which typically require just a few hundred watts. For deployments that dictate support for PoE power, Cisco offers several options. The Cisco Catalyst 4500E Series offers AC power with several internal supplies: 1000W (data only), 1400W (data only), 1300W (data and PoE), 2800W (data and PoE), 4200W (data and PoE), and 6000W (data and PoE). When 5500W or less is required, the 4200W power supply can provide 5500W while protecting the chassis from a power or power-supply subunit failure. All Cisco Catalyst 4500 AC power supplies are single phase and operate between 100VAC and 240VAC. The Cisco Catalyst 4500E Series has two DC power options: one is optimized for data-only deployments in service provider central offices (part number PWR-C DC), and the other is used for high-power PoE deployments (PWR-C DC-P). All DC power supplies are designed to operate between -44VDC and -72VDC. Cisco Catalyst 4500E Series Service Provider DC Power Supply The triple-input 1400-WDC power supply is optimized for service provider central-office deployments. By providing multiple inputs, the service provider DC power supply allows central-office technicians to customize the output power to meet their application needs. Many central-office deployments require only a fraction of the 1400W available in the service provider power supply. With low-current inputs, technicians can connect the supply to smaller fuses and breakers. The service provider power supply makes it possible to deploy a Cisco Catalyst 3-slot chassis with a single 15A circuit. Likewise, it is possible to deploy a fully populated Cisco Catalyst 10-slot chassis with one 15A and two 20A circuits rather than a single 60A connection, which often requires rack rewiring (Table 3). Table 3. Triple-Input 1400-WDC Power-Supply Input Modes Input Mode Input No. Input Configuration Maximum Total Output Power 1 1 One 12.5A 412W 2 2 or 3 One 15A 495W 3 1, 2, or 3 One 12.5A and one 15A 908W 4 2 or 3 Two 15A 990W 5 1, 2, or 3 One 12.5A and two 15A 1400W 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 11

31 Cisco Catalyst 4500E Series Dual Input AC PoE Power Supplies The 6000W ACV and 4200W ACV power supplies feature combined Mode Power Resiliency as an extension of the traditional combined mode power-supply behavior. Each power supply contains two smaller power supplies (called subunits). In Combined Mode Power Resiliency the system relies only on power from three out of four power-supply subunits. When using 200 VAC, this feature helps ensure that maximum power is available while the switch is protected against a single input power failure or subunit component failure. (See Tables 4 through 7.) 6000W AC Power Supply Table 4. Dual-Input 6000 WAC Power-Supply Input Mode (Single Power Supply) PS1-1 PS1-2 Total Output Power 110V Off 1050W 110V 110V 2100W 220V Off 3000W 220V 220V 6000W Table 5. Total Output Power in Combined Mode Power Resiliency PS1-1 PS1-2 PS2-1 PS2-2 Total Output Power 110V 110V 110V 110V (hot standby) 2730W 220V 220V 220V 220V (hot standby) 7850W 6000W AC Power Supply also supports true output power consumption monitoring capability. 4200W AC Power Supply Table 6. Dual-Input 4200 WAC Power-Supply Input Mode (Single Power Supply) PS1-1 PS1-2 Total Output Power 110V Off 1050W 110V 110V 2100W 220V Off 2100W 220V 220V 4200W Table 7. Total Output Power in Combined Mode Power Resiliency PS1-1 PS1-2 PS2-1 PS2-2 Total Output Power 110V 110V 110V 110V (hot standby) 2730W 220V 220V 220V 220V (hot standby) 5500W 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 11

32 Cisco Catalyst 4500E Series Power Supplies In any deployment scenario, whether AC or DC, the Cisco Catalyst 4500 Series has the power supplies and external power devices to meet customers power needs for data, voice, and video applications (Figure 1). Figure 1. Cisco Catalyst 4500 Series Power Supplies Features For information on Cisco Catalyst 4500E Series power-supply specifications, see Tables 8 through 10. Table 8. Cisco Catalyst 4500E Series Power-Supply Specifications (Data-Only Power Supplies) Power Supply Minimum Cisco IOS Software release required Minimum Cisco Catalyst Operating System Software required 1000 WAC (PWR C AC) 1400 WAC (PWR C AC) 1400W Triple Input DC (PWR-C DC) 12.1(12c)EW 12.2(18)EW 12.2(25)EW 7.4(1) - - Integrated PoE No (data only) No (data only) No (data only) IEEE 802.3af compliant No No No Input voltage Input current (rated) 100 to 240 VAC (±10% for full range) 12A at 100 VAC 5A at 240 VAC Output current (data) 12V at 83.4A 3.3V at 12.2A 100 to 240 VAC (±10% for full range) 16A at 100 VAC 7A at 240 VAC 12V at 113.4A 3.3V at 12.2A Output current (PoE) to -60 VDC Two -48 VDC at 15A One -48 VDC at 12.5A Two -48 VDC at 15A One -48 VDC at 12.5A Output power redundant mode (data) 1000W + 40W 1360W + 40W 1368W + 40W 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 11

33 Power Supply 1000 WAC (PWR C AC) 1400 WAC (PWR C AC) Output power redundant mode (PoE) Output power combined mode (data) 1667W 2473W 2473W- Output power combined mode (PoE) W Triple Input DC (PWR-C DC) Heat dissipation 943 BTU/hr 1048 BTU/hr 1048 BTU/hr Holdup time 20 ms 20 ms 4 ms Table 9. Cisco Catalyst 4500E Series Power-Supply Specifications (Data and Voice) Minimum Cisco IOS Software release required Minimum Cisco Catalyst Operating System Software required 1300 WACV (PWR C ACV) 2800 WACV (PWR C ACV) 1400 WDC-P (PWR C DC-P) 4200 WACV (PWR C ACV) 6000 WACV (PWR C ACV) 12.1(12c)EW 12.1(12c)EW 12.1(13)EW (52)SG 7.4(1) 7.4(1) 7.5(1) - - Integrated PoE Yes (up to 800W) Yes (up to 1400W) Up to 7500W (minus power consumed for data) when connected directly to DC power plant IEEE 802.3af compliant Input voltage Input current (rated) Yes (up to 3855W) Yes (up to 4800W) Yes Yes Yes Yes Yes 100 to 240 VAC (±10% for full range) 16A at 100 VAC 7A at 240 VAC Output current (data) 12V at 84.7A 3.3V at 12.5A 200 to 240 VAC (±10% for full range) 16A at 200 VAC 12V at 113.3A 3.3V at 12.1A Data: -48 to -60 VDC Inline: -48 to -56 VDC Data: 31A at -60 VDC Inline: 180A at - 48VDC 12V at 120A 3.3V at 10A Output current (PoE) -50V at 16.7A -50V at 28A -48 or -60 VDC at 140A Output power redundant mode (data) Output power redundant mode (PoE) Output power combined mode (data) Output power combined mode (PoE) 100 to 240 VAC (±10% for full range) Two 12A at 100 VAC or Two 12A at 200 VAC 12V at 115.3A 3.3V at 12.5A -50V at 77.1A (200V) -50V at 38A (100V) 100 to 240 VAC (±10% for full range) Two 12A at 100 VAC or Two 16A at 200 VAC 12V at 186.9A 3.3V at 12.5A -50V at 100.0A (200V) -50V at 38.5A (120V) 1000W + 40W 1360W + 40W 1360W + 40W 1360W + 40W 2200W + 40W 800W maximum per power supply 1400W maximum per power supply Up to 7500W (minus the power consumed for data) 3700W (220V) 1850W (110V) 1667W 2473W 2473W 2473W 4400W 1333W (maximum) 2333W 7280W 6700W (220V) Heat dissipation 1568 BTU/hour 2387 BTU/hr Data only: 1591 BTU/hr Data and voice: 2905 BTU/hr 3360W (110V) 4800W (220V) 1850W (110V) 8700W (220V) 3360W (110V) 3580 BTU/hr 2720 BTU/hr Holdup time 20 ms 20 ms 4 ms 20 ms 20 ms Number of 802.3af class 2 powered devices supported in redundant mode (200V) 245 (100V) 384 (200V) 245 (100V) 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 11

34 1300 WACV (PWR C ACV) 2800 WACV (PWR C ACV) 1400 WDC-P (PWR C DC-P) 4200 WACV (PWR C ACV) 6000 WACV (PWR C ACV) Number of 802.3af classes 0 and 3 powered devices supported in the redundant mode (200V) 111 (100V) 289 (200V) 111 (100V) Table 10. Feature Specifications of Cisco Catalyst 4500E Series Description Power-supply indicators and interfaces Environmental conditions Fan cooling: Integrated in hot-inserting or hot-extraction unit Good: Green Fail: Red Support for Simple Network Management Protocol (SNMP) MIB Operating temperature: 32 to 104ºF (0 to 40ºC) Storage temperature: -40 to 167ºF (-40 to 75ºC) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: -60 to 3000m Regulatory Standards Compliance Safety UL CAN/CSA-C22.2 No EN IEC TS 001 AS/NZS 3260 Electromagnetic compatibility (EMC) Industry EMC, safety, and environmental standards Warranty Service and support FCC Part 15 (CFR 47) Class A ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN EN EN EN EN EN ETS GR-63-Core Network Equipment Building Standards (NEBS) Level 3 GR-1089-Core Level 3 EN ETS Storage Class 1.1 ETS Transportation Class 2.3 (pending) ETS Stationary Use Class 3.1 ETS Cisco Catalyst 4500 Power Supplies are covered for five (5) years by the Cisco Limited Lifetime Hardware Warranty. For more information, see this document on Cisco.com: Note: If you purchased a Cisco Catalyst 4500E Series PoE line card or power supply before May 1, 2009, it is covered by the Cisco 90-Day Limited Hardware Warranty. For more information, see this document on Cisco.com: Cisco offers lifecycle service and support for the Cisco Catalyst 4500 Series, directly and for resale through Cisco distributors. From implementation to operation and optimization, Cisco offers advanced service and technical support Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 11

35 Feature Advanced service Technical support ROHS compliance Description Cisco Total Implementation Solutions (TIS) offers a full range of implementation solutions, including project management, project engineering, configuration, and staging and rollout coordination; Cisco TIS helps ensure correct installation and deployment. For more information about Cisco TIS, visit: Cisco SMARTnet Online and telephone support augments the customer s operations-staff resources. Support includes the ability to refresh system software at will as well as a range of Advance Replacement hardware options. Cisco SMARTnet Onsite support adds the services of a field engineer, services that can be critical when customer staffing is insufficient or unavailable for parts-replacement activities. For more information about Cisco SMARTnet support, visit: ROHS5 Power and MTBF Information Table 11 gives MTBF numbers for the different power supplies. Table 11. MTBF Numbers Part Number Rated MTBF (Hours) PWR-C ACV 164,220 PWR-C ACV 155,822 PWR-C ACV 331,945 PWR-C ACV 341,356 PWR-C DC-P 316,454 PWR-C AC 250,000 PWR-C AC 570,530 PWR-C DC 316,454 Ordering Information To place an order, visit the Cisco Ordering homepage or refer to Tables 12 through 14. Table 12. Cisco Catalyst 4500 Power-Supply Ordering Information Part Number PWR-C AC PWR-C AC PWR-C ACV PWR-C ACV PWR-C DC-P PWR-C ACV PWR-C ACV PWR-C DC Product Name Cisco Catalyst WAC Power Supply (Data Only) Cisco Catalyst WAC Power Supply (Data Only) Cisco Catalyst WAC Power Supply (PoE) Cisco Catalyst WAC Power Supply (PoE) Cisco Catalyst WDC Power Supply with PEM (PoE) Cisco Catalyst WAC Power Supply (PoE) Cisco Catalyst WAC Power Supply (PoE) Cisco Catalyst WDC SP Central-Office Power Supply (Triple Input) Table 13. Cisco Catalyst 4500 Series Power-Cord Options (Data Only) Power Supply 1000 WAC 1400 WAC 1400 WDC Region/Product ID PWR-C AC PWR-C AC - Europe CAB-7KACE= CAB-7513ACE= - International United States CAB-7KAC= CAB-7513AC= - Australia CAB-7KACA= CAB-7513ACA= - Italy CAB-7KACI= CAB-7513ACI= Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 11

36 Power Supply 1000 WAC 1400 WAC 1400 WDC United Kingdom CAB-7KACU= CAB-7513ACU= - Argentina CAB-7KACR= CAB-7513ACR= - South Africa - CAB-7513ACSA= - Table 14. Cisco Catalyst 4500 Series Power-Cord Options (Data and Voice) Power Supply 1300 ACV 2800 WACV 4200 WACV 6000 WACV 1400 WDC-P External Power Region and product ID PWR C ACV PWR C ACV Europe CAB-7513ACE= CAB-AC-2800W- EU= International N/A CAB-AC-2800W- INT= United States CAB-7513AC= CAB-AC-2800W- TWLK= CAB-AC-2800W-6-20= Australia CAB-7513ACA= Same as international Italy CAB-7513ACI= Same as international Argentina CAB-7513ACR= Same as international South Africa CAB-7513ACSA= Same as international PWR C ACV CAB-CEE77-C19- EU PWR C ACV CAB-CEE77-C19- EU PWR C DC-P 2500W PWR CAB-4502AC-EU CAB-I309-C19-INT CAB-I309-C19-INT - - CAB-US515P- C19-US CAB-L620P-C19- US CAB-US620P- C19-US CAB-A3112-C19- AUS CAB-C2316-C19- IT Same as international Same as international Israel - - CAB-S132-C19- ISRL CAB-US515P- C19-US CAB-L620P-C19- US CAB-US620P- C19-US CAB-A3112-C19- AUS CAB-C2316-C19- IT Same as international Same as international CAB-S132-C19- ISRL - CAB-4502AC-US * The 1300-WACV and 1400-WAC power supplies can use the power cords for the 2800-WAC power supply. Cisco Limited Lifetime Hardware Warranty The Cisco limited lifetime hardware warranty (LLW) includes 10-day advance hardware replacement for as long as the original end user owns the product. Table 15 describes the limited lifetime hardware warranty. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use. For additional information on warranty terms, visit Adding a Cisco technical services contract to your device coverage provides benefits not available with warranty including access to the Cisco Technical Assistance Center (TAC), a variety of hardware replacement options to meet critical business needs, updates for licensed Cisco IOS Software, and registered access to the extensive Cisco.com knowledge base and support tools. Table 16 describes the benefits and features of Cisco technical services. For information about Cisco Technical Services, go to Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 11

37 Table 15. Limited Lifetime Hardware Warranty Cisco Limited Lifetime Hardware Warranty 1 Warranty Duration EoL Policy Hardware Replacement Effective Date TAC Support Cisco.com Access As long as the original end user continues to own or use the product except for the fan and power supply, which are limited to 5 years. In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance. Cisco or its service center will use commercially reasonable efforts to ship a replacement part within 10 business days after receipt of the RMA request and confirmation that a replacement part is appropriate response. Actual delivery times may vary depending on customer location. Hardware warranty commences from the date of shipment to the customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco). None. Warranty allows guest access only to Cisco.com. 1 Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. Cisco and Partner Services Enable the innovative, secure, intelligent edge in the Borderless Network Architecture using personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the next-generation Cisco Catalyst 4500-E Series Switches into your architecture and incorporate network services onto that platform. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support services designed to meet your business needs and help you maintain high-quality network performance while controlling operational costs. Table 16 shows the Cisco technical services available for Cisco Catalyst 4500-E Series Switches. For additional information about Cisco services, visit Table 16. Cisco Technical Services for Cisco Catalyst 4500-E Series Switches Technical Services Cisco SMARTnet Service Around-the-clock, global access to the Cisco Technical Assistance Center (TAC) Unrestricted access to the extensive Cisco.com resources, communities, and tools Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement 2 and onsite parts replacement and installation available Ongoing operating system software updates within the licensed feature set 1 Proactive diagnostics and real-time alerts on Smart Call Home enabled devices Cisco Smart Foundation Service Next business day advance hardware replacement as available Business hours access to SMB TAC (access levels vary by region) Access to Cisco.com SMB knowledge base Online technical resources through Smart Foundation Portal Operating system software bug fixes and patches Cisco Focused Technical Support Services Three levels of premium, high-touch services are available: Cisco High-Touch Operations Management Service Cisco High-Touch Technical Support Service Cisco High-Touch Engineering Service Valid Cisco SMARTnet or SP Base contracts on all network equipment are required Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 11

38 Notes: 1. Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set. 2. Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with next business day (NBD) delivery. Where NBD is not available, same day ship is provided. Restrictions apply; please review the appropriate service descriptions for details. Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 11

39 Data Sheet Cisco Catalyst 4500 Series Line Cards High-Performance, Mobile, and Secure User Experience Product Benefits Cisco Catalyst 4500 Series Switches enable borderless networks, providing high-performance, mobile, and secure user experiences through Layer 2-4 switching. Enabling security, mobility, application performance, video, and energy savings over your network infrastructure, the Cisco Catalyst 4500 Switch supports resiliency, virtualization, and automation, further improving the ease of network use. Cisco Catalyst 4500 Series Switches provide borderless performance, scalability, and services with reduced total cost of ownership (TCO) and superior investment protection. The Cisco Catalyst 4500 Switch delivers predictable and scalable high performance, with advanced dynamic quality of service (QoS) capabilities and configuration flexibility for deploying borderless networks. Integrated resiliency features in both hardware and software maximize network availability, helping to ensure workforce productivity, profitability, and customer success. Its centralized, innovative, and flexible system design helps ensure smooth migration to wire-speed IPv6 and 10 Gigabit Ethernet (GE). The forward and backward compatibility between generations of the Cisco Catalyst 4500 Series extends deployment life, providing exceptional investment protection, while reducing the (TCO). The Cisco Catalyst 4500E Series is a high-performance, next-generation extension to the Cisco Catalyst 4500 Series. The new E-Series is composed of the Cisco Catalyst 4500E Series supervisor engines, E-Series line cards, and E-Series chassis, which are designed for a high-performance, mobile, and secure user experience with superior backward and forward compatibility, delivering exceptional investment protection for organizations of all sizes. Cisco Catalyst 4500E Series and Classic Line Cards The Cisco Catalyst 4500 Series offers two classes of line cards: classic and E-Series. Classic line cards provide 6 gigabits of switching capacity per slot. E-Series line cards provide increased switching capacity per slot. This increase in per-slot switching capacity with the E-Series line cards requires the Cisco Catalyst 4500E Series chassis and the Cisco Catalyst 4500E Series Supervisor. Two types of E-Series line cards are available based on the per-slot switching capacity. E-Series line cards numbered 47xx operate at 48 gigabits per slot, while E-Series line cards numbered 46xx operate at 24 gigabits per slot. Classic line cards may be deployed in both classic and E-Series chassis with either classic Cisco Catalyst 4500 Series supervisor engines or with the Cisco Catalyst 4500E Series Supervisor Engine. With the E-Series supervisor engine, the per-slot switching capacity for classic line cards remains at 6 gigabits per slot. However, because of the centralized switching architecture of the Cisco Catalyst 4500, the classic line cards will adopt all of the new E-Series supervisor engine features such as eight queues per port, dynamic QoS, and hardware-based IPv6 routing. For more feature details, refer to the E-Series supervisor engine data sheet. Classic line cards and E-Series line cards may be mixed and matched within a Cisco Catalyst 4500E Series chassis with no performance degradation: classic line cards will operate at 6 gigabits per slot, and E-Series line cards operate at either 48 gigabits per slot or 24 gigabits per slot based on whether 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 22

40 they belong to the 47xx or 46xx family of line cards. Table 1 summarizes the chassis and supervisor support for both classic and E-Series line cards. Table 1. Cisco Catalyst 4500 Line-Card Support Options Line-Card Type Per-Slot Bandwidth Chassis Support Supervisor Support Cisco Catalyst xx E-Series Line Cards WS-X4748-RJ45V+E 1 WS-X4748-UPOE+E WS-X4748-RJ45-E Cisco Catalyst xx E-Series Line Cards Cisco Catalyst 4500 Series Classic Line Cards 48 Gbps Cisco Catalyst 4503-E, 4506-E, 4507R+E, and 4510R+E 24 Gbps Cisco Catalyst 4507R-E and 4510R-E 24 Gbps Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E 2 6 Gbps Cisco Catalyst 4503, 4506, 4507R, and 4510R Switches Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E Switches Supervisor Engine 7-E, Supervisor Engine 7L-E Supervisor Engine 7-E, Supervisor Engine 7L-E Supervisor Engine 7-E, Supervisor Engine 7L-E, Supervisor Engine 6-E, Supervisor Engine 6L-E Supervisor Engine 7-E 3, Supervisor Engine 7L-E, Supervisor Engine 6-E, Supervisor Engine 6L-E3, Supervisor Engine V-10GE Power over Ethernet on Cisco Catalyst 4500E The Cisco Catalyst 4500E Series offers line cards, power supplies, and accessories required to deploy and operate standards-based Power over Ethernet/Power over Ethernet Plus (PoE/PoEP) and Universal POEP (UPOE). PoE provides power over 100 m of standard unshielded twisted-pair (UTP) cables when an IEEE 802.3af/at-compliant or Cisco pre-standard powered device is attached to the PoE/PoEP and UPOE line-card port. Instead of requiring wall power, attached devices such as IP phones, wireless base stations, video cameras, and other IEEE-compliant appliances can use power provided from the Cisco Catalyst 4500 Series PoE/PoEP and UPOE line cards. For the regular DC (Direct Current) device that doesn't support PoE/PoEP natively, Cisco Catalyst 4500 Series provides the UPOE Power Splitter that enables an UPOE port to power a 12V DC power device and another PoE/PoEP appliance. This capability gives network administrators centralized control over power and eliminates the need to install outlets in ceilings and other out-of-the-way places where a powered device can be installed. Table 2 shows the PoE options for Cisco Catalyst 4500 Series line cards. Although all references to PoE/PoEP/UPOE, inline power, and voice power supplies and line cards are synonymous, there are currently four versions: Cisco prestandard, IEEE 802.3af compliant, IEEE 802.3at compliant, and UPOE. Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the IEEE 802.3af/at standard and the Cisco prestandard power implementation, helping ensure backward compatibility with existing devices powered by Cisco. UPOE line cards require E series chassis. All IEEE 802.3af/at-compliant and UPOE line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface card (NIC), helping ensure power is applied only when an appropriate device is connected. 1 WS-X4712-SFP+E is not supported on 4507R-E and 4510R-E chassis. 2 Slots 8-10 on 4510R-E and 4510R+E chassis do not support E-Series line cards with Supervisor Engine 6-E. 3 Supervisor Engine 7-E does not support non-e-series chassis: 4503, 4506, 4507R, and 4510R Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 22

41 Cisco Catalyst 4500E Series and Classic Gigabit Ethernet Copper Line Cards The Cisco Catalyst 4500E Series 48-port Gigabit Ethernet line cards provide high-performance 10/100/1000 switching. Two types of E-Series line cards are available, based on the per-slot bandwidth: 47xx line cards that drive 48 Gbps per slot, and 46xx line cards that drive 24 Gbps per slot. The Cisco Catalyst port 10/100/1000 PoEP E-Series 47xx line card provides standard IEEE 802.3at PoEP support on all 48 ports simultaneously. All series 47xx line cards support standard IEEE 802.1AE encryption and Cisco TrustSec in hardware. The Cisco Catalyst port 10/100/1000 line cards are available in four versions: Data Only, PoE, PoEP, and UPOE. Table 2. Cisco Catalyst 4500 Line Card PoE Options Line-Card Type Data Only (no PoE) PoE (802.3af) PoEP (802.3at) UPOE Cisco Catalyst xx E-Series Line Cards Yes Yes Yes Yes Cisco Catalyst xx E-Series Line Cards Yes Yes Yes - Cisco Catalyst 4500 Series Classic Line Cards Yes Yes Yes - Cisco Catalyst 4500 Classic Fast Ethernet Copper Line Cards The Cisco Catalyst 4500 Series offers a variety of classic Fast Ethernet line cards with copper interfaces optimized for desktops and servers for enterprise and commercial switching solutions. The two varieties of fast Ethernet copper line cards are: Data only (no PoE) Standard IEEE 802.3af PoE Cisco Catalyst 4500E Series 10 Gigabit Ethernet Fiber Line Cards The Cisco Catalyst 4500E Series supports 10 Gigabit Ethernet Fiber line cards. The Cisco Catalyst 4500E Series 12-port 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for high-performance and high-density 10 Gigabit Ethernet aggregation in the campus and in small to medium-sized networks as a core switch. The Cisco Catalyst 4500E Series 12-port 10 Gigabit Ethernet line card supports standard Small Form-Factor Pluggable Plus (SFP+) optics. The ports can be used interchangeably as Gigabit Ethernet and 10 Gigabit Ethernet to support phased migration from Gigabit Ethernet to 10 Gigabit Ethernet. The Cisco Catalyst 4500E Series 6-port 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for high-performance/low-density 10 Gigabit Ethernet aggregation in the campus, in small to medium-sized networks as a core switch, or for high-performance wiring closets where additional 10 Gigabit Ethernet uplinks are required. The Cisco Catalyst 4500E Series 6-port 10 Gigabit Ethernet line card supports standard X2 optics as well as the Cisco TwinGig modules. The Cisco TwinGig Converter Module converts a single 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet port slots, which can be populated with appropriate SFP optics, providing a total of 12 wire-speed Gigabit Ethernet ports if used in all six X2 interface slots. The flexibility provided by the TwinGig Converter Module enables customers to aggregate Gigabit Ethernet and 10 Gigabit Ethernet LAN access switches on a single line card and also supports phased migration from Gigabit Ethernet to 10 Gigabit Ethernet. This capability further demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 Series architecture (Figure 1). TwinGig modules convert a single X2 port into two Gigabit Ethernet SFP ports Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 22

42 Figure 1. TwinGig Module Cisco Catalyst 4500E Series Gigabit Ethernet Fiber Line Cards The Cisco Catalyst 4500E Series 24-port Gigabit Ethernet fiber line card (SFP based) and Cisco Catalyst 4500E Series 12-port Gigabit Ethernet fiber line card (SFP based) provide high-performance switching at 24 Gbps per slot (line rate). Both E-Series line cards are nonblocking and designed for high-performance 1 Gigabit Ethernet aggregation in the campus and to support Fiber to the Desktop (FTTD) applications. The Cisco Catalyst 4500 Series offers oversubscribed Gigabit Ethernet fiber line cards optimized for FTTD and FTTH deployments. The Cisco Catalyst 4500 Series 48 module Gigabit line card (8:1 oversubscribed) provides switching at 6Gbps per slot and can be used for higher density deployments. The Cisco Catalyst 4500E Series 40 module Gigabit line card (2:1 oversubscribed) provides switching at 24Gbps per slot and can be used for enterprise deployments that require higher density and lower oversubscription. This line card also supports a specialized BX optics (compact SFP) that doubles the density to 80 ports per line card using 40 module, making it attractive for the FTTH deployment. The CSFP is a dual bidirectional SFP type that has the same form factor as a regular SFP, but can support 2 users that use BX type of optics (Figure 2) Figure 2. Compact SFP Cisco Catalyst 4500 Classic Fast Ethernet Fiber Line Cards The Cisco Catalyst 4500 Series offers a variety of classic Fast Ethernet line cards with fiber interfaces optimized for desktops, branch office backbones, and servers for enterprise and commercial switching solutions and service provider metropolitan Ethernet networks. Fast Ethernet line cards include various densities of wire-speed 10/100, 100-FX, 100BASE-LX10, and 100BASE-BX-D options Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 22

43 Features and Benefits Functional Transparency Cisco Catalyst 4500 Series Switches offer an extensive line of modules that support numerous speeds and physical media combinations. These line cards are functionally transparent; all the packet processing, queuing, buffering, and QoS occur in the supervisor engine. To that end, both classic and E-Series line cards acquire the features and capabilities of the installed supervisor engine. For example, a classic line card previously deployed with a classic supervisor engine using four queues per port will automatically have capability for eight queues per port if redeployed with a Supervisor Engine 7-E/6-E. This architecture enables customers to easily upgrade all Ethernet line cards on their Cisco Catalyst 4500 Series systems to higher layer switching functions by adding a new supervisor engine. The simple design of the line cards results in a very high mean time between failures (MTBF), helping ensure high availability for a single connection to an end user. Modular Versatility The Cisco Catalyst 4500 Series is a centralized architecture that is designed to provide dedicated wire-speed bandwidth to each line-card slot within the chassis. Each line card has a dedicated bandwidth to the supervisor engine for packet processing. All network data that flows into the Cisco Catalyst 4500 Series through the various line cards goes through the supervisor engine for processing, even in single-slot port-to-port communications. All line cards have some per-slot bandwidth that allows network administrators to design a system that offers full dedicated bandwidth-to-server and switch-to-switch applications and still provides high performance over subscribed gigabit to the desktop. A modular centralized design allows customers to use their investment in high-performance line cards across the entire line of Cisco Catalyst 4500 Series chassis and supervisor engines. For example, line cards that shipped with the original Cisco Catalyst 4003 Switch in 1999 will work in the Cisco Catalyst 4500E Series chassis. Because of the centralized architecture of the Cisco Catalyst 4500, all line cards deployed in a chassis benefit from the enhanced features that the supervisor engine provides, including QoS, Layer 2/3/4 routing, and hardware-based IPv6. Following are descriptions of line cards that are available for Cisco Catalyst 4500 Series Switches. Cisco Catalyst 4500E Series 10 Gigabit Ethernet Fiber Line Card Figure 3 shows the WS-X4712-SFP+E. Figure 3. WS-X4712-SFP+E Cisco Catalyst 4500E Series 12-Port 10 Gigabit Ethernet (SFP+) WS-X4712-SFP+E: 48 gigabits per-slot capacity Bandwidth is allocated across four 3-port groups, providing 12 Gbps per port group (2.5:1) Up to 12 ports 10GE SFP+ (10GBASE-R) or 12 ports GE SFP (1GBASE-X) SFP+ and SFP can be used simultaneously on the same line card without any restrictions 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 22

44 Cisco IOS XE Release 3.1.0SG or later IEEE 802.1AE and Cisco TrustSec capability in hardware L2-4 Jumbo Frame support (up to 9216 bytes) Enterprise and commercial: designed for high-speed backbone and switch-to-switch applications Service provider: 10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul WS-X4712-SFP+E is not supported on 4507R-E and 4510R-E chassis Figure 4 shows the WS-X4606-X2-E. Figure 4. WS-X4606-X2-E Cisco Catalyst 4500E Series 6-Port 10 Gigabit Ethernet (X2) WS-X4606-X2-E: 24 gigabits per-slot capacity 24-gigabit bandwidth is allocated across six 10 Gigabit Ethernet ports (2.5:1) 10GBASE-X (X2) and 1GBASE-X (SFP) Up to 6 ports 10GE X2 or 12 ports GE SFP using TwinGig Converter Module TwinGig modules must be used in groups of three: ports 1-3 or ports 4-6 Cisco IOS Software Release 12.2(40)SG or later L2-4 Jumbo Frame support (up to 9216 bytes) Enterprise and commercial: designed for high-speed backbone and switch-to-switch applications Service provider: 10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul Cisco Catalyst 4500E Series Gigabit Ethernet Fiber Line Card Figure 5shows the WS-X4624-SFP-E. Figure 5. WS-X4624-SFP-E WS-X4624-SFP-E: 24-port line-rate SFP line card, providing 24 gigabits per-slot capacity (1:1 oversubscribed) Cisco IOS Software Release 12.2(44)SG or later L2-4 Jumbo Frame support (up to 9216 bytes) Inherits Supervisor Engine QoS capability 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 22

45 Compatible only with E-Series supervisor engines Enterprise, mid-market, and commercial core and distribution deployments requiring line-rate capability Service provider: GE aggregation for DSLAM/PON/mobile data backhaul Figure 6 shows the WS-X4612-SFP-E. Figure 6. WS-X4612-SFP-E WS-X4612-SFP-E: 12 Port line-rate SFP line card, providing 12 gigabits per-slot capacity (1:1 oversubscribed) Cisco IOS Software Release 12.2(54)SG or later L2-4 Jumbo Frame support (up to 9216 bytes) Inherits Supervisor Engine QoS capability Compatible only with E-Series supervisor engines Enterprise, mid-market, and commercial core and distribution deployments requiring line-rate capability Service provider: GE aggregation for DSLAM/PON/mobile data backhaul Figure 7 shows WS-X4640-CSFP-E. Figure 7. WS-X4640-CSFP-E WS-X4640-CSFP-E: 40 modules of Gigabit SFP line card (1000BaseX), providing 24 gigabits per-slot capacity (SFP optional) 40 ports with Gigabit SFP (2:1 oversubscribed) 80 ports with Gigabit compact SFP (4:1 oversubscribed) Customers can mix and match Gigabit SFP and Gigabit compact SFPs Cisco IOS Software Release IOS XE SG or later Compatible with Supervisor Engine 7E and 7L-E only Supported on 3, 6, and 7 slot chassis IEEE 802.3, IEEE 802.3ah, IEEE 802.3x flow control L2-4 Jumbo Frame support (up to 9216 bytes) Inherits supervisor engine QoS capability 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 22

46 Service Provider: Point-to-Point fiber to the home (FTTH) or building (FTTB) for residential and business applications Enterprise: Providing Fiber to the Desktop (FTTD), for deployments where non-blocking is not a mandatory requirement Cisco Catalyst 4500E Series 10/100/1000 Line Cards Figure 8 shows the WS-X4748-UPOE+E. Figure 8. WS-X4748-UPOE+E Cisco Catalyst 4500E Series 48-Port 802.3af PoE, 802.3at PoEP, and UPOE 10/100/1000 (RJ-45) WS-X4748-UPOE+E: 48 ports nonblocking 10/100/1000 module (RJ-45) Cisco IOS XE Release 3.1.0SG or later UPOE: capable of up to 60 W per port up to 1440 W Energy Efficient Ethernet 802.3az IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control IEEE 802.1AE and Cisco TrustSec capability in hardware L2-4 Jumbo Frame support (up to 9216 bytes) Capable of up to 30 W of inline power per port on all ports simultaneously Enterprise and commercial: designed to power next-generation IP phones, wireless base stations, video cameras, virtual desktop clients, and other PoE/UPOE devices Campus and branch applications requiring enhanced performance for large file transfers and network backups Figure 9 shows the WS-UPOE-12VPSPL. Figure 9. WS-UPOE-12VPSPL Cisco Power Splitter 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 22

47 WS-UPOE-12VPSPL: Receives both data and power from an UPOE (RJ45) connector Regular 12V DC connector 10/100/1000 RJ45 PoE/PoEP connector Provide integrated solution to PoE and regular DC power device from a single source Figure 10 shows the WS-X4748-RJ45V+E. Figure 10. WS-X4748-RJ45V+E Cisco Catalyst 4500E Series 48-Port 802.3af PoE and 802.3at PoEP 10/100/1000 (RJ-45) WS-X4748-RJ45V+E: 48 ports nonblocking 10/100/1000 module (RJ-45) Cisco IOS XE Release 3.1.0SG or later IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control IEEE 802.1AE and Cisco TrustSec capability in hardware L2-4 Jumbo Frame support (up to 9216 bytes) Capable of up to 30 W of inline power per port on all ports simultaneously Enterprise and commercial: designed to power next-generation IP phones, wireless base stations, video cameras, and other PoE devices Campus and branch applications requiring enhanced performance for large file transfers and network backups Figure 11 shows the WS-X4748-RJ45-E. Figure 11. WS-X4748-RJ45-E Cisco Catalyst 4500E Series 48-Port 10/100/1000 (RJ-45) WS-X4748-RJ45-E: 48 ports nonblocking 10/100/1000 module (RJ-45) Cisco IOS XE Release 3.1.0SG or later Energy Efficient Ethernet 802.3az 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 22

48 IEEE 802.1AE and Cisco TrustSec capability in hardware L2-4 Jumbo Frame support (up to 9216 bytes) Enterprise and commercial: designed for data only user access Campus and branch applications requiring enhanced performance for large file transfers and network backups Figure 12 shows the WS-X4648-RJ45V+E. Figure 12. WS-X4648-RJ45V+E Cisco Catalyst 4500E Series 48-Port 802.3af PoE and 802.3at PoEP 10/100/1000 (RJ-45) WS-X4648-RJ45V+E: 24 gigabits per-slot capacity 48 ports 10/100/1000 module (RJ-45) Cisco IOS Software Release 12.2(40)SG or later IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1) L2-4 Jumbo Frame support (up to 9216 bytes) Capable of up to 30 W of inline power per port on up to 24 ports simultaneously Enterprise and commercial: designed to power next-generation IP phones, wireless base stations, video cameras, and other PoE devices Campus and branch applications requiring enhanced performance for large file transfers and network backups Figure 13 shows the WS-X4648-RJ45V-E. Figure 13. WS-X4648-RJ45V-E Cisco Catalyst 4500E Series 48-Port 802.3af PoE 10/100/1000 (RJ-45) WS-X4648-RJ45V-E: 24 gigabits per-slot capacity 48 ports 10/100/1000 module (RJ-45) 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 22

49 Cisco IOS Software Release 12.2(40)SG or later Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1) L2-4 Jumbo Frame support (up to 9216 bytes) IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices Campus and branch applications requiring enhanced performance for large file transfers and network backups Figure 14 shows the WS-X4648-RJ45-E. Figure 14. WS-X4648-RJ45-E Cisco Catalyst 4500E Series 48-Port Data-only 10/100/1000 (RJ-45) WS-X4648-RJ45-E: 24 gigabits per-slot capacity 48 ports 10/100/1000 module (RJ-45) Cisco IOS Software Release 12.2(50)SG or later Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1) L2-4 Jumbo Frame support (up to 9216 bytes) Enterprise campus, commercial collapsed core, and branch applications requiring enhanced performance for large file transfers and network backups Campus and branch applications requiring enhanced performance for large file transfers and network backups Service provider: GE/100M aggregation for DSLAM and PON Cisco Catalyst 4500 Classic Line Cards Classic 10/100/1000 Ethernet Line Cards Figure 15 shows the WS-X4548-RJ45V Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 22

50 Figure 15. WS-X4548-RJ45V+ Cisco Catalyst Port 802.3af PoE and 802.3at PoEP 10/100/1000 (RJ-45) WS-X4548-RJ45V+: 48 ports 10/100/1000 (RJ-45) Cisco IOS Software Release 12.2(50)SG or later IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group Capable of up to 30 W of inline power per port on up to 24 ports simultaneously Enterprise and commercial: designed to power next-generation IP phones, wireless base stations, video cameras, and other PoE devices that require power up to 30 watts Figure 16 shows the WS-X4548-GB-RJ45V. Figure 16. WS-X4548-GB-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45) WS-X4548-GB-RJ45V: 48 ports 10/100/1000 (RJ-45) Cisco IOS Software Release 12.2(18)EW or later IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices Figure 17 shows the WS-X4548-GB-RJ Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 22

51 Figure 17. WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45: 48 ports 10/100/1000 module (RJ-45) Cisco IOS Software Release 12.1(19)EW or later IEEE 802.3x flow control Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group Enterprise and commercial: designed for gigabit to the desktop Classic Gigabit Ethernet Fiber Line Card (GBIC or SFP) The Cisco Catalyst 4500 Series offers a variety of gigabit interface converter (GBIC) - or Small Form Factor Pluggable (SFP)-enabled gigabit solutions for high-performance Gigabit Ethernet uplinks and server farm connectivity. The five GBIC- or SFP-enabled gigabit line-card options for the Cisco Catalyst 4500 Series include 6-, 18-, and 48-port versions. GBIC or SFP technology allows customers to intermix intrabuilding multimode fiber (MMF) connections and long-distance single-mode connections simply by changing the GBIC or SFP type. (See Table 3 for more information.) Figure 18 shows the WS-X4306-GB. Figure 18. WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB: 6 ports 1000BASE-X (GBIC) Cisco IOS Software Release 12.1(8a)EW or later IEEE L2-4 Jumbo Frame support (up to 9216 bytes) Enterprise and commercial: designed for high-speed backbone, switch-to-switch applications, or small server farms 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 22

52 Service provider: GE small aggregation for DSLAM/PON/mobile data backhaul Figure 19 shows the WS-X4418-GB. Figure 19. WS-X4418-GB Cisco Catalyst 4500 Gigabit Ethernet Module, Server Switching 18 Ports (GBIC) WS-X4418-GB: 18 ports 1000BASE-X (GBIC) Cisco IOS Software Release 12.1(8a)EW or later IEEE 802.3, IEEE 802.3x flow control 2 ports of wire-speed 1000BASE-X Gigabit Ethernet uplinks 16 ports: 4:1 oversubscribed Enterprise and commercial: designed for fiber to the desktop, switch-to-switch applications, or small server farms Figure 20 shows the WS-X4448-GB-SFP. Figure 20. WS-X4448-GB-SFP Cisco Catalyst 4500 Gigabit Ethernet Module, 48 Ports 1000X (SFP) WS-X4448-GB-SFP: 48 ports 1000BASE-X (SFP) Customers can mix and match 1000BASE-X SFP optics on the same line card IEEE 802.3x flow control Service provider: Run point-to-point Gigabit Ethernet fiber to the home (FTTX) Enterprise and commercial: designed for server farms and switch-to-switch applications Figure 21 shows the WS-X4506-GB-T Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 22

53 Figure 21. WS-X4506-GB-T Cisco Catalyst Port 10/100/1000 RJ-45 PoE IEEE 802.3af and 1000BASE-X (SFP) WS-X4506-GB-T: 6-port 10/100/1000 and 6-port SFP (any combination of up to 6 ports can be active at one time) 10/100/1000 RJ-45 PoE and 1000BASE-X (SFP) Cisco IOS Software Release 12.2(20)EWA PoE IEEE 802.3af and Cisco prestandard (RJ-45 only) Provides full line-rate gigabit switching on all ports L2-4 Jumbo Frame support (up to 9216 bytes) Designed to give customers the choice of RJ-45 with or without PoE and SFP without incurring extra costs Enterprise and commercial: high-performance desktop connectivity and server farms; designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant appliances Service provider: GE small aggregation for DSLAM/PON/mobile data backhaul Classic 10/100 Ethernet Line Card Figure 22 shows the WS-X4248-RJ45V. Figure 22. WS-X4248-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100, 48 Ports (RJ-45) WS-X4248-RJ45V: 48 ports 10/100 (RJ-45) Cisco IOS Software Release 12.2(18)EW or later IEEE 802.3af PoE and Cisco prestandard Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices Figure 23 shows the WS-X4148-RJ Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 22

54 Figure 23. WS-X4148-RJ Cisco Catalyst /100 Module, 48 Ports (RJ-45) WS-X4148-RJ: 48 ports 10/100BASE-T module (RJ-45) Enterprise and commercial: high-port-density solution for desktop connectivity Classic Fast Ethernet Fiber Line Card Figure 24 shows the WS-X4248-FE-SFP. Figure 24. WS-X4248-FE-SFP Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-X (SFP) WS-X4248-FE-SFP: 48-port 100BASE-X (SFP optional) Customers can mix and match 100BASE-X SFP optics on the same line card IEEE 802.3, IEEE 802.3ah, IEEE 802.3x flow control Enterprise and commercial: fiber-to-the-desktop applications Service providers: running point-to-point Fast Ethernet to the home or business (FTTH) Specification Summary Table 3 summarizes product specifications. Table 3. Port Information for Line Cards Line Card Number of Ports E-Series 10 Gigabit Ethernet Line Cards Port Speed Port Type Wire Rate Cisco Catalyst 4500 Series Min/Max Ports 4503-E 4506-E/ 4507R-E/ 4507R+E 4510R-E/ 4510R+E 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 22

55 Line Card Number of Ports Port Speed Port Type Wire Rate WS-X4712-SFP+E GBASE-R SFP+ or SFP 2.5-to-1 with SFP+ WS-X4606-X2-E 6 10GBASE-X X2 or SFP with TwinGig Converter Module E-Series 10/100/1000 Line Cards WS-X4748-UPOE+E 48 10/100/1000 RJ-45 UPOE IEEE 802.3at, IEEE 802.3af, Cisco prestandard WS-X4748-RJ45V+E 48 10/100/1000 RJ-45 PoE IEEE 802.3at, IEEE 802.3af, Cisco prestandard 1:1 with SFP 2.5-to-1 with X2 1:1 with SFP Cisco Catalyst 4500 Series Min/Max Ports 4503-E 4506-E/ 4507R-E/ 4507R+E 4510R-E/ 4510R+E 12/ / /96 5 6/ / / /60 5 6/30 6/30 1:1 48/ / /384 5,6 1:1 48/ / /384 5 WS-X4748-RJ45-E 48 10/100/1000 RJ-45 1:1 48/ / /384 5 WS-X4648-RJ45V+E 48 10/100/1000 RJ-45 PoE IEEE 802.3at, IEEE 802.3af, Cisco prestandard WS-X4648-RJ45V-E 48 10/100/1000 RJ-45 PoE IEEE 802.3af, Cisco prestandard 2-to-1 48/ / /384 5, 6 2-to-1 48/ / /384 5,6 WS-X4648-RJ45-E 48 10/100/1000 RJ-45 2-to-1 48/ / /384 5,6 E-Series Gigabit Ethernet SFP Line Cards WS-X4624-SFP-E Pluggables 1:1 24/48 24/120 24/168 WS-X4612-SFP-E Pluggables 1:1 12/28 12/64 12/ WS-X4640-CSFP-E 40 with SFP 80 with CSFP Classic 10/100/1000 Line Cards 1000 Pluggables 2:1 with SFP 4:1 with CSFP 40/160 40/400 Not supported WS-X4548- RJ45V+ WS-X4548- GB-RJ45V WS-X4524- GB-RJ45V 48 10/100/1000 RJ-45 PoE IEEE 802.3at, IEEE 802.3af, Cisco prestandard 48 10/100/1000 RJ-45 PoE IEEE 802.3af and Cisco prestandard 24 10/100/1000 RJ-45 PoE IEEE 802.3af and Cisco prestandard 8-to /96 48/240 48/384 8-to-1 48/96 48/240 48/384 4-to-1 24/48 24/120 24/168 WS-X4548-GB-RJ /100/1000 RJ-45 8-to-1 48/96 48/240 48/384 4 WS-X4712-SFP+E is not supported on 4507R-E and 4510R-E chassis. 5 E-Series line cards require E-Series chassis. 6 Requires Supervisor Engine 7-E to support greater than 240 ports on 4510R+E and 4510R-E chassis. 7 The amount of oversubscription can be controlled by varying the number of ports used at 1000 Mbps. All ports can use Gigabit EtherChannel or IEEE 802.3ad for high-speed interconnection applications. All oversubscribed ports use the standard IEEE 802.1x flow control (PAUSE frame) mechanism to control Gigabit Ethernet host traffic Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 22

56 Line Card Number of Ports Port Speed Port Type Wire Rate Cisco Catalyst 4500 Series Min/Max Ports 4503-E 4506-E/ 4507R-E/ 4507R+E 4510R-E/ 4510R+E Classic Gigabit Ethernet Fiber (GBIC or SFP) Line Cards WS-X4306-GB BASE-X GBIC Yes 6/12 6/30 6/42 WS-X4418-GB BASE-X GBIC 2 ports full 16 ports 4-to-1 18/36 18/90 18/126 WS-X4448-GB-LX BASE-LX 48 SFPs (included) 8-to-1 48/96 48/240 48/384 WS-X4448-GB-SFP BASE-X SFP 8-to-1 48/96 48/240 48/384 WS-X4506-GB-T /100/ BASE-X (SFP) RJ-45 PoE IEEE 802.3af and Cisco prestandard Yes 6/12 6/30 6/42 Classic Fast Ethernet Fiber Line Cards WS-X4248-FE-SFP BASE-X SFP Yes 48/96 48/240 48/384 Classic 10/100 Ethernet Line Cards WS-X4148-RJ 48 10/100 RJ-45 Yes 48/96 48/240 48/384 WS-X4248-RJ45V 48 10/100 RJ-45 PoE IEEE 802.3af and Cisco prestandard Yes 48/96 48/240 48/384 Optics Cisco Catalyst 4500 line cards provide a variety of optical port types and port speeds: SFP+, X2, SFP, GBIC, 100BASE-FX, and so on. For details about the different optical modules supported by each line card and the minimum Cisco IOS Software release required for each of the supported optical modules, visit Product Specification Table 4 lists product specifications. Table 4. Feature Standards Product Specifications Description Gigabit Ethernet: IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, IEEE 803.3at, IEEE 802.3af, IEEE 802.3az 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM EtherChannel Technology Physical Dimensions Environmental Conditions Gigabit EtherChannel: All 1000 Mbps ports 10 Gigabit EtherChannel: All 10Gbps ports IEEE 802.3ad (Link Aggregation Control Protocol): All 1000 Mbps ports Port Aggregation Protocol (PagP): Yes Number of ports per tuple: 8 EtherChannel and IEEE 802.3ad technology across line cards: Yes Occupies one slot in the Cisco Catalyst 4500 Series platform Dimensions (H x W x D): 1.2 x x in. (3.0 x 36.2 x 27.3 cm) Operating temperature: 32 to 104 F (0 to 40 C) Storage temperature: -40 to 167 F (-40 to 75 C) Relative humidity: 10 to 90%, noncondensing Operating altitude: -60 to 3000m 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 18 of 22

57 Feature Safety Conditions Description Fiber optic lasers: Class 1 laser products Safety Certifications UL 1950 EN CSA-C22.2 no 950 IEC 950 Electromagnetic Emissions Certifications ROHS Compliance FCC 15J Class A VCCI Class A CE Marking EN Class A EN Class A CISPR 22 Class A AS/NZ 3548 NEBS Level 3 (GR-1089-CORE, GR-63-CORE) ETSI ETS EN ROHS5 Power and MTBF Information Table 5 gives power and MTBF information for different line cards. Table 5. Power and MTBF Information Part Number Max Rated Power (W) Rated MTBF (Hours) WS-X4748-UPOE+E ,696 WS-X4748-RJ45V+E ,330 WS-X4748-RJ45-E ,386 WS-X4712-SFP+E ,172 WS-X4624-SFP-E ,109 WS-X4612-SFP-E ,740 WS-X4640-CSFP-E ,724 WS-X4648-RJ45-E ,365 WS-X4648-RJ45V-E ,365 WS-X4648-RJ45V+E ,365 WS-X4606-X2-E ,717 WS-X4548-GB-RJ45V ,646 WS-X4548-RJ45V ,436 WS-X4548-GB-RJ ,356 WS-X4506-GB-T ,098 WS-X4306-GB ,262 WS-X4418-GB ,330 WS-X4448-GB-SFP ,732 WS-X4248-FE-SFP ,828 WS-X4148-RJ ,860 WS-X4248-RJ45V ,594 Note: All power numbers shown in Table 5 are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20 percent lower than the maximum value shown Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 22

58 Ordering Information To place an order, visit the Cisco Ordering homepage. Table 6 gives ordering information. Table 6. Ordering Information Part Number ( = Indicates Spare ) WS-X4748-UPOE+E (=) WS-UPOE-12VPSPL(=) WS-X4748-RJ45V+E (=) WS-X4748-RJ45-E (=) WS-X4712-SFP+E (=) WS-X4624-SFP-E (=) WS-X4612-SFP-E (=) WS-X4640-CSFP-E (=) WS-X4648-RJ45-E (=) WS-X4648-RJ45V-E (=) WS-X4648-RJ45V+E (=) WS-X4606-X2-E (=) WS-X4548-GB-RJ45V(=) WS-X4548-RJ45V+(=) WS-X4548-GB-RJ45(=) WS-X4506-GB-T(=) WS-X4306-GB(=) WS-X4418-GB(=) WS-X4448-GB-SFP(=) WS-X4248-FE-SFP (=) WS-X4148-RJ(=) WS-X4248-RJ45V(=) Product Name Cisco Catalyst 4500E Series 48-Port UPOE 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series UPOE Power Splitter Cisco Catalyst 4500E Series 48-Port 802.3at PoEP 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 48-Port 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 12-Port 10 Gigabit Ethernet (SFP+) Cisco Catalyst 4500E Series 24-Port GE (SFP) Cisco Catalyst 4500E Series 12-Port GE (SFP) Cisco Catalyst 4500E Series 40 SFP/80 C-SFP Port 1000BaseX (SFPs Optional) Cisco Catalyst 4500E Series 48-Port 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 48-Port 802.3af PoE 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 48-Port 802.3af PoE and PoEP - 10/100/1000 (RJ-45) Cisco Catalyst 4500E Series 6-Port 10 Gigabit Ethernet (X2) Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45) Cisco Catalyst 4500 PoE IEEE 802.3af and PoEP-Ready 10/100/1000, 48 Ports (RJ-45) Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) Cisco Catalyst Port 10/100/1000 RJ-45 PoE IEEE 802.3af and 1000BASE-X (SFP) Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) Cisco Catalyst 4500 Gigabit Ethernet Module, Server Switching 18 Ports (GBIC) Cisco Catalyst 4500 Gigabit Ethernet Module, 48-Port 1000X (SFP) Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-X (SFP) Cisco Catalyst /100 Module, 48 Ports (RJ-45) Cisco Catalyst 4500 PoE IEEE 802.3af 10/100, 48 Ports (RJ-45) Cisco Limited Lifetime Hardware Warranty The Cisco limited lifetime hardware warranty (LLW) includes 10-day advance hardware replacement for as long as the original end user owns the product. Table 7 describes the limited lifetime hardware warranty. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use. For additional information on warranty terms, visit Adding a Cisco technical services contract to your device coverage provides benefits not available with warranty, including access to the Cisco Technical Assistance Center (TAC), a variety of hardware replacement options to meet critical business needs, updates for licensed IOS software, and registered access to the extensive Cisco.com knowledge base and support tools. Table 8 describes the benefits and features of Cisco technical services. For information about Cisco Technical Services, go to Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 22

59 Table 7. Limited Lifetime Hardware Warranty Cisco Limited Lifetime Hardware Warranty 8 Warranty Duration EoL Policy Hardware Replacement Effective Date TAC Support Cisco.com Access As long as the original end user continues to own or use the product, except for the fan and power supply, which are limited to 5 years. In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance. Cisco or its service center will use commercially reasonable efforts to ship a replacement part within 10 business days after receipt of the RMA request and confirmation that a replacement part is appropriate response. Actual delivery times may vary depending on customer location. Hardware warranty commences from the date of shipment to the customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco). None. Warranty allows guest access only to Cisco.com. 8 Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. Cisco and Partner Services Enable the innovative, secure, intelligent edge in the Borderless Network Architecture using personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the next-generation Cisco Catalyst 4500-E Series Switches into your architecture and incorporate network services onto that platform. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support services designed to meet your business needs and help you maintain high-quality network performance while controlling operational costs. Table 8 shows the Cisco technical services available for Cisco Catalyst 4500-E Series Switches. For additional information about Cisco services, visit Table 8. Cisco Technical Services for Cisco Catalyst 4500-E Series Switches Technical Services Cisco SMARTnet Service Around-the-clock, global access to the Cisco Technical Assistance Center (TAC) Unrestricted access to the extensive Cisco.com resources, communities, and tools Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement 9 and onsite parts replacement and installation available Ongoing operating system software updates within the licensed feature set 10 Proactive diagnostics and real-time alerts on Smart Call Home enabled devices Cisco Smart Foundation Service Next business day advance hardware replacement as available Business hours access to SMB TAC (access levels vary by region) Access to Cisco.com SMB knowledge base Online technical resources through Smart Foundation Portal Operating system software bug fixes and patches Cisco Focused Technical Support Services Three levels of premium, high-touch services are available: Cisco High-Touch Operations Management Service Cisco High-Touch Technical Support Service Cisco High-Touch Engineering Service Valid Cisco SMARTnet or SP Base contracts on all network equipment are required Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 21 of 22

60 Footnotes: 9 Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard eight-hour business day, five days a week (the generally accepted business days within the relevant region), with next business day (NBD) delivery. Where NBD is not available, same-day shipping is provided. Restrictions apply; please review the appropriate service descriptions for details. 10 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set. For More Information For more information about the Cisco Catalyst 4500 Series line cards, visit or contact your local account representative. For more information about Cisco transceiver modules compatible with Cisco Catalyst 4500 Series line cards, visit Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 22 of 22

61 Data Sheet Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software The Cisco Catalyst 2960-S and 2960 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Cisco Catalyst 2960-S Series Switches include new Cisco FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Switches offering fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S and 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership. The Cisco Catalyst 2960-S is shown in Figure 1, and the Cisco Catalyst 2960 Series Switches are shown in Figure 2. What s new for the Cisco Catalyst 2960-S Series Switches with LAN Base software: 10 and 1 Gigabit Ethernet uplink flexibility with Small Form-Factor Pluggable Plus (SFP+), providing business continuity and fast transition to 10 Gigabit Ethernet 24 or 48 ports of Gigabit Ethernet desktop connectivity Cisco FlexStack stacking module with 40 Gbps of throughput, allowing ease of operation with single configuration and simplified switch upgrade PoE+ with up to 30W per port that allows you to support the latest PoE+ capable devices Power supply options, with 740W or 370W fixed power supplies for PoE+ switches are available USB storage for file backup, distribution, and simplified operations A wide range of software features to provide ease of operation, highly secure business operations, sustainability, and a borderless network experience Limited lifetime hardware warranty, including next-business-day replacement with 90-day service and support The Cisco Catalyst 2960 Series Switches with LAN Base software offer the following: Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, with one port active at a time 24 or 48 ports of Fast Ethernet desktop connectivity PoE configurations with up to 15.4W per port A wide range of software features to provide ease of operation, highly secure business operations, sustainability, and a borderless networking experience Limited lifetime hardware warranty Figure 1. Cisco Catalyst 2960-S Series Switches Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 26

62 Data Sheet Figure 2. Cisco Catalyst 2960 Series Switches Switch Configurations Table 1 shows the configuration information for the Cisco Catalyst 2960-S Series Switches with LAN Base software, and Table 2 shows the configuration information for the Cisco Catalyst 2960 Series Switches with LAN Base software. Table 1. Configurations of Cisco Catalyst 2960-S Series Switches with LAN Base Software Cisco Catalyst 2960-S Switch Model Description Uplinks Available PoE Power 10 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity Cisco Catalyst 2960S-48FPD-L 48 Ethernet 10/100/1000 PoE+ ports 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports 740W Cisco Catalyst 2960S-48LPD-L 48 Ethernet 10/100/1000 PoE+ ports 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports 370W Cisco Catalyst 2960S-24PD-L 24 Ethernet 10/100/1000 PoE+ ports 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports 370W Cisco Catalyst 2960S-48TD-L 48 Ethernet 10/100/1000 ports 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports - Cisco Catalyst 2960S-24TD-L 24 Ethernet 10/100/1000 ports 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports - 1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity Cisco Catalyst 2960S-48FPS-L 48 Ethernet 10/100/1000 PoE+ ports 4 One Gigabit Ethernet SFP ports 740W Cisco Catalyst 2960S-48LPS-L 48 Ethernet 10/100/1000 PoE+ ports 4 One Gigabit Ethernet SFP ports 370W Cisco Catalyst 2960S-24PS-L 24 Ethernet 10/100/1000 PoE+ ports 4 One Gigabit Ethernet SFP ports 370W Cisco Catalyst 2960S-48TS-L 48 Ethernet 10/100/1000 ports 4 One Gigabit Ethernet SFP ports - Cisco Catalyst 2960S-24TS-L 24 Ethernet 10/100/1000 ports 4 One Gigabit Ethernet SFP ports - All models available with optional Cisco FlexStack stacking module. Cisco Catalyst 2960S-STACK is optional Stacking Module for all 2960-S LAN Base switches that includes a.5m stack cable. No DC Power supplies are available Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 26

63 Data Sheet Table 2. Configurations of Cisco Catalyst 2960 Series Switches with LAN Base Software Cisco Catalyst 2960 Switch Model Description Uplinks Available PoE Power 1 Gigabit Uplinks with 10/100 Ethernet Connectivity Cisco Catalyst PST-L 48 Ethernet 10/100 PoE ports 2 one Gigabit Ethernet SFP ports and 2 fixed Ethernet 10/100/1000 ports 370W Cisco Catalyst PC-L 24 Ethernet 10/100 PoE ports 2 dual-purpose ports (10/100/1000 or SFP) 370W Cisco Catalyst LT-L 24 Ethernet 10/100 ports 2 Ethernet 10/100/1000 ports 123W Cisco Catalyst TC-L 24 Ethernet 10/100 ports 2 dual-purpose ports - Cisco Catalyst TC-L 48 Ethernet 10/100 ports 2 dual-purpose ports (10/100/1000 or SFP) - Cisco Catalyst TT-L 24 Ethernet 10/100 ports 2 Ethernet 10/100/1000 ports - Cisco Catalyst TT-L 48 Ethernet 10/100 ports 2 Ethernet 10/100/1000 ports - 1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity Cisco Catalyst 2960G-24TC-L 20 Ethernet 10/100/1000 ports 4 dual-purpose ports (10/100/1000 or SFP) Cisco Catalyst 2960G-48-TC-L 44 Ethernet 10/100/1000 ports 4 dual-purpose ports (10/100/1000 or SFP) Compact Switches Cisco Catalyst TC-L Cisco Catalyst 2960PD-8TT-L Cisco Catalyst 2960G-8TC-L 8 Ethernet 10/100 ports; compact size with no fan 8 Ethernet 10/100 ports; compact size with no fan 7 Ethernet 10/100/1000 ports; compact size with no fan 1 dual-purpose port (10/100/1000 or SFP) 1 10/100/1000 PoE input port 1 dual-purpose port (10/100/1000 or SFP) Cisco FlexStack Stacking Cisco FlexStack stacking with a hot-swappable module and Cisco IOS Software provides true stacking, all switches in a stack act as a single switch unit. The Cisco FlexStack provides a unified data plane, unified configuration, and single IP address management for a group of switches. The advantages of true stacking are lower total cost of ownership through simplified management and higher availability. Cisco FlexStack supports cross-stack features including EtherChannel, SPAN and FlexLink technology. A stack module can be added to any Cisco Catalyst 2960-S switch with LAN Base software to quickly upgrade the switch to make it stack capable, and the switch added to the stack will upgrade to the correct Cisco IOS Software version and transparently become a stack member. Figure 3 shows the FlexStack stacking module for the Cisco Catalyst 2960-S. Figure 3. Cisco Catalyst 2960-S Switches with Cisco FlexStack Modules and Stack Cabling Power over Ethernet Plus In addition to PoE 802.3af, the Cisco Catalyst 2960-S Series Switches support Power over Ethernet Plus (PoE+) (IEEE 802.3at standard), which provides up to 30W of power per port. The Cisco Catalyst 2960-S and 2960 Series Switches can provide a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 26

64 Data Sheet would otherwise be necessary in IP phone and WLAN deployments. Table 3 shows the power supply combinations required for different PoE needs. Table 3. Switch PoE and PoE+ Power Capacity Switch Model Maximum Number of PoE+ (IEEE 802.3at) Ports * Maximum Number of PoE (IEEE 802.3af) Ports * Available PoE Power 10 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity Cisco Catalyst 2960S-48FPD-L 24 ports up to 30W 48 ports up to 15.4W 740W Cisco Catalyst 2960S-48LPD-L 12 ports up to 30W 24 ports up to 15.4W 48 ports up to 7.7W 370W Cisco Catalyst 2960S-24PD-L 12 ports up to 30W 24 ports up to 15.4W 370W 1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity Cisco Catalyst 2960S-48FPS-L 24 ports up to 30W 48 ports up to 15.4W 740W Cisco Catalyst 2960S-48LPS-L 12 ports up to 30W 24 ports up to 15.4W 48 ports up to 7.7W 370W Cisco Catalyst 2960S-24PS-L 12 ports up to 30W 24 ports up to 15.4W 370W Cisco Catalyst PST-L N/A 24 ports up to 15.4W 48 ports up to 7.7W 370W Cisco Catalyst PC-L N/A 24 ports up to 15.4W 370W Cisco Catalyst LT-L N/A 8 ports up to 15.4W 123W * Intelligent power management allows flexible power allocation across all ports. Cisco Catalyst 2960-S and 2960 Series Switches Enable Cisco Borderless Network Borderless Networks, a Cisco architecture, deliver the new workspace experience, connecting anyone, anywhere, using any device, to any resource securely, reliably, and transparently. Cisco s Borderless Networks architecture addresses primary IT and business challenges to help create a truly borderless experience by bringing interactions closer to the employee and customer. Borderless experience is only possible with intelligent network elements designed and architected to meet the needs of a global workspace. Cisco Network Access is a primary component of this architecture, enabling various borderless network services such as mobility, security, sustainability, and ease of operations for increased productivity and operational efficiency. When network access is intelligent, it knows the identity of the user, as well as where the user is on the network. It knows what is connecting to the network, to automatically provision the network for QoS and delivery. It becomes services-aware to optimize user experience. Only with intelligent access network, your enterprise can go borderless securely and transparently. Your business can save energy, simplify operations with better business efficiency, and have an optimized total cost of ownership. Cisco Network Access for Borderless solution focuses on the following primary areas: Sustainability Ease of operations Borderless security Borderless experience Sustainability Cisco Catalyst switching solutions enable greener practices through measurable power efficiency, integrated services, and continuous innovations such as Cisco EnergyWise, an enterprisewide solution that monitors and conserves energy with customized policies. Together, Cisco EnergyWise technology and Cisco Catalyst switches Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 26

65 Data Sheet reduce greenhouse gas (GhG) emissions and increase energy cost savings and sustainable business behavior. Sustainability features in the Cisco Catalyst 2960-S and 2960 Series Switches include the following features sets: Cisco EnergyWise technology Efficient switch operation Intelligent power management Cisco EnergyWise Technology Cisco EnergyWise is an innovative architecture, added to fixed configuration switches, promoting companywide sustainability by reducing energy consumption across an entire corporate infrastructure and affecting more than 50 percent of global greenhouse gas emissions created by worldwide building infrastructure, a much greater effect than the 2 percent generated by the IT industry. Cisco EnergyWise enables companies to measure the power consumption of network infrastructure and network-attached devices and manage power consumption with specific policies, reducing power consumption to realize increased cost savings, potentially affecting any powered device. EnergyWise encompasses a highly intelligent network-based approach to communicate messages that measure and control energy between network devices and endpoints. The network discovers Cisco EnergyWise-manageable devices, monitors their power consumption, and takes action based on business rules to reduce power consumption. EnergyWise uses a unique domain-naming system to query and summarize information from large sets of devices, making it simpler than traditional network management capabilities. Cisco EnergyWise s management interfaces allow facilities and network management applications to communicate with endpoints and each other using the network as a unifying fabric. The management interface uses standard SNMP or TCP to integrate Cisco and thirdparty management systems. Efficient Switch Operation Cisco Catalyst 2960-S and 2960 Series Switches, designed and engineered by Cisco, provide optimum power saving, low power operations for industry best-in-class power management, and power consumption capabilities. The Cisco Catalyst 2960-S ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state. Intelligent Power Over Ethernet Management The Cisco Catalyst 2960-S PoE models support the latest PoE+ devices including Cisco IP phones and Cisco Aironet WLAN access points providing up to 30W of power per port, as well as any IEEE 802.3af-compliant end device. Per Port Power Consumption command allows customers to specify maximum power setting on an individual port. Per Port PoE Power Sensing measures actual power being drawn, enabling more intelligent control of powered devices. Cisco Discovery Protocol Version 2 allows switches to negotiate a more granular power setting when connecting to a Cisco powered device such as IP phones or access points than what is provided by IEEE classification. The PoE MIB provides proactive visibility into power usage and allows customers to set different power-level thresholds. Ease of Operations The Cisco Catalyst 2960-S and 2960 Series Switches help reduce the operating costs through: Cisco Catalyst Smart Operations Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 26

66 Data Sheet Easy to use deployment and control features Advanced, intelligent network management tools Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is a comprehensive set of capabilities that simplify LAN deployment, configuration, and troubleshooting. Cisco Catalyst Smart Operations enable zero touch installation and replacement of switches, fast upgrade, as well as ease of troubleshooting with reduced operational cost. Cisco Catalyst Smart Operations is a set of features that includes Smart Install, Auto Smartports, Smart Configuration, and Smart Troubleshooting to enhance operational excellence: Cisco Smart Install is a transparent plug-and-play technology to configure the Cisco IOS Software image and switch configuration without user intervention. Smart Install utilizes dynamic IP address allocation and the assistance of other switches to facilitate installation providing transparent network plug and play. Cisco Auto Smartports provide automatic configuration as devices connect to the switch port, allowing auto detection and plug and play of the device onto the network. Cisco Smart Configuration provides a single point of management for a group of switches and in addition adds the ability archive and backup configuration files to a file server or switch allowing seamless zero touch switch replacement. Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health checks within the switch, including Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL). Easy-to-Use Deployment and Control Features Automatic QoS (AutoQoS) simplifies QoS configuration in voice over IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress queue configuration. Stacking Master Configuration Management and Cisco FlexStack stacking helps ensure that all switches are automatically upgraded when the master switch receives a new software version. Automatic software version checking and updating help ensure that all stack members have the same software version. Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server eases switch deployment. Auto-Negotiation on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth. Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports. Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or Gigabit EtherChannel groups to link to another switch, router, or server. Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP. Automatic Media-Dependent Interface Crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed. Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces. Switching Database Manager (SDM) templates for access, routing, and VLAN deployment allow the administrator to easily maximize memory allocation to the desired features based on deployment-specific requirements Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 26

67 Data Sheet Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to minimize broadcasts and maximize available bandwidth. Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only the requestors. Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons. Per-port Broadcast, Multicast, and Unicast Storm Control prevents faulty end stations from degrading overall systems performance. Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting. Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across all switches. Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network. For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events). Layer 2 Traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination. Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location. Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches. Advanced, Intelligent Network Management Tools The Cisco Catalyst 2960-S and 2960 Series Switches offer both a superior CLI for detailed configuration and Cisco Network Assistant software, a PC-based tool for quick configuration based on preset templates. In addition, CiscoWorks LAN Management Solution (LMS) supports the Cisco Catalyst 2960-S and 2960 Series Switches for networkwide management. CiscoWorks LAN Management Solution CiscoWorks LAN Management Solution (LMS) is a comprehensive network lifecycle management solution. It provides an extensive library of easy-to-use features to automate the initial and day-to-day management of your Cisco network infrastructure. CiscoWorks LMS uniquely uses Cisco hardware and software platform knowledge and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools. Including: Support for new Cisco hardware platforms the day they ship Support for new technologies and services from initial deployment to day-to-day administration and management, such as EnergyWise, Identity, Cisco Auto Smartports, Cisco Smart Install, and much more Configuration management tools built from Cisco experience and Cisco Validated Design recommendations Monitoring and troubleshooting capabilities that incorporates Cisco hardware best practices and diagnostics features Automation in managing hardware inventories, security vulnerabilities (PSIRTS), and platform end-of-life and support cycles Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 26

68 Data Sheet For detailed information about CiscoWorks LMS, go to Borderless Security The Cisco Catalyst 2960-S and 2960 Series Switches provide superior Layer 2 threat defense capabilities for mitigating man-in-the-middle attacks (such as MAC, IP, and ARP spoofing). TrustSec, a primary element of Borderless Security Architecture, helps enterprise customers secure their networks, data and resources with policybased access control, identity and role-aware networking, pervasive integrity, and confidentiality. The borderless security is enabled by the following feature sets in the Cisco Catalyst 2960-S and 2960 SeriesSwitches: Threat defense Cisco TrustSec Other advanced security features Threat Defense Cisco Integrated Security Features is an industry-leading solution available on Cisco Catalyst Switches that proactively protects your critical network infrastructure. Delivering powerful, easy-to-use tools to effectively prevent the most common and potentially damaging Layer 2 security threats, Cisco Integrated Security Features provides robust security throughout the network. Cisco Integrated Security Features include Port Security, DHCP Snooping, Dynamic ARP Inspection, and IP Source guard. Port Security secures the access to an access or trunk port based on MAC address. It limits the number of learned MAC addresses to deny MAC address flooding. DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning. Dynamic ARP Inspection (DAI) helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol. IP Source Guard prevents a malicious user from spoofing or taking over another user s IP address by creating a binding table between the client s IP and MAC address, port, and VLAN. Cisco TrustSec TrustSec secures access to the network, enforces security policies, and delivers standard based security solutions such as 802.1X enabling secure collaboration and policy compliance. TrustSec capabilities reflect Cisco thought leadership, innovations, and commitment to customer success. These new capabilities include: Flexible Authentication that supports multiple authentication mechanisms including 802.1X, MAC Authentication Bypass and web authentication using a single, consistent configuration Open Mode that creates a user friendly environment for 802.1X operations Integration of Device Profiling Technology and Guest Access handling with Cisco switching to significantly improve security while reducing deployment and operational challenges RADIUS Change of Authorization and Downloadable Calls for comprehensive policy management capabilities 802.1X Supplicant with Network Edge Access Transport (NEAT) enables extended secure access where compact switches in the conference rooms have the same level of security as switches inside the locked wiring closet Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 26

69 Data Sheet Other Advanced Security Features Other Advanced Security features include but are not limited to: Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users traffic. Multidomain Authentication allows an IP phone and a PC to authenticate on the same switch port while placing them on appropriate voice and data VLAN. Port-Based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports. Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows Cisco Intrusion Detection System (IDS) to take action when an intruder is detected. TACACS+ and RADIUS Authentication facilitates centralized control of the switch and restricts unauthorized users from altering the configuration. MAC Address Notification allows administrators to be notified of users added to or removed from the network. Multilevel Security on Console Access prevents unauthorized users from altering the switch configuration. Bridge Protocol Data Unit (BPDU) Guard shuts down Spanning Tree PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops. Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator s control from becoming Spanning Tree Protocol root nodes. IGMP Filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port. Dynamic VLAN Assignment is supported through implementation of VLAN Membership Policy Server client capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast assignment of IP addresses. Borderless Experience Borderless network enables enterprise mobility and business-grade video services. The industry s first unified network (wired and wireless) location services enable tracking of mobile assets and the users of those assets for both wired and wireless devices. The true borderless experience is enabled by the following feature sets in the Cisco Catalyst 2960-S and 2960 Series Switches: High availability and Layer 2 networking Enhanced quality of service (QoS) Location awareness and mobility High Availability and Layer 2 Networking The Cisco Catalyst 2960-S Series Switches provides Cisco FlexStack stacking and both the Cisco Catalyst 2960-S and 2960 Series switches provide Layer 2 networking to enable resiliency and availability. Other high-availability features include but are not limited to: Cross-Stack EtherChannel provides the ability to configure Cisco EtherChannel technology across different members of the Cisco FlexStack for high resiliency Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 26

70 Data Sheet Flexlink provides link redundancy with convergence time less than 100 ms. IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of Layer 2 load balancing and distributed processing. Stacked units behave as a single spanning-tree node. Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-vlan spanning-tree basis, without requiring the implementation of spanning-tree instances. Switch-port Autorecovery (Errdisable) automatically attempts to reactivate a link that is disabled because of a network error. Enhanced Quality of Service The Cisco Catalyst 2960-S and 2960 Series Switches offers intelligent services that keep everything flowing smoothly. Industry-leading mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Following are some of the QoS features supported in the Cisco Catalyst 2960-S and 2960 Series Switches: Cross-Stack QoS allows QoS to be configured across the entire Cisco Catalyst 2960-S Flexstack p Class of Service (CoS) and differentiated services code point (DSCP) field classification are provided, using marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or Layer 4 TCP/UDP port number. Cisco Control-plane and Data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis. Four Egress Queues Per Port help enable differentiated management of different traffic types across the stack. Shaped Round Robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the ingress queues and egress queues. Weighted Tail Drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs. Strict Priority Queuing helps ensure that the highest-priority packets are serviced ahead of all other traffic. Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable the trust setting if the IP phone is removed, thereby preventing a malicious user Rate Limiting is provided based on source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps. Up to 64 Aggregate or Individual Policers are available per Fast Ethernet or GbE port. Location Awareness and Mobility In order to provide delivery of a best-in-class network experience to end users, it is critical for network access to be location aware. A wide variety of devices can appear on the network, both wired (switches, routers, IP phones, PCs, access points, controllers, video digital media players, and so on) and wireless (mobile devices, wireless tags, rogues, and so on). In many industries, locating assets is primarily a manual process and is time consuming and error prone. The inability to locate assets in real time and to help ensure their availability when and where they are needed limits reaction time and efficiency. Location services answer business-critical questions about both mobile assets and the users of those assets regardless of whether those assets are connecting using wired or wireless, and hence directly improve their Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 26

71 Data Sheet organization s profitability. Network Location Services also improve security and accelerate client troubleshooting by locating an asset, user, or device on the network. Network Visibility and Control provide centralized visibility into wired and wireless devices on the network and their location. Location-Assisted Client Troubleshooting enables tracking of wired or wireless clients for quick problem resolution. Asset Tracking and Improved Security provide centralized inventory of wired and wireless devices and asset management for improved business processes. Location-Based Policy allows greater control and visibility. With EnergyWise, power policies can be set up (to reduce the power or shut down the power from a port) based on the location. Cisco Emergency Responder enhances emergency calling from Cisco Unified CallManager. It helps assure that Cisco Unified CallManager sends emergency calls to the appropriate Public Safety Answering Point (PSAP) for the caller s location. Tables 4, 5, 6, 7, and 8 provide hardware features, power specifications, management and standards support, and safety and compliance information for the Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base software. Table 4. Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software Switch Performance and Scalability information Performance and Scalability Numbers for All Switch Models Cisco Catalyst 2960-S Cisco Catalyst 2960 Forwarding Bandwidth 88 Gbps 20 Gbps for FlexStack Stacking 16 Gbps 32 Gbps (2960G) Switching Bandwidth * 176 Gbps 32Gbps 32 Gbps (2960G) Flash Memory 64 MB 32 MB Memory DRAM 128 MB 64 MB Cisco Catalyst 2960-S Cisco Catalyst 2960 Max VLANs VLAN IDs Maximum Transmission Unit (MTU) Up to 9000 bytes Up to 9000 bytes Jumbo Frames 9018 bytes 9018 bytes (2960G only) Forwarding Rate: 64-Byte Packet Cisco Catalyst 2960-S Cisco Catalyst 2960S-48FPD-L Cisco Catalyst 2960S-48LPD-L Cisco Catalyst 2960S-24PD-L Cisco Catalyst 2960S-48TD-L Cisco Catalyst 2960S-24TD-L Cisco Catalyst 2960S-48FPS-L Cisco Catalyst 2960S-48LPS-L Cisco Catalyst 2960S-24PS-L Cisco Catalyst 2960S-48TS-L Cisco Catalyst 2960S-24TS-L mpps mpps 65.5 mpps mpps 65.5 mpps 77.4 mpps 77.4 mpps 41.7 mpps 77.4 mpps 41.7 mpps Forwarding Rate: 64-Byte Packet Cisco Catalyst 2960 Cisco Catalyst 2960PD-8TT-L Cisco Catalyst TC-L Cisco Catalyst TT-L 2.7 mpps 2.7 mpps 6.5 mpps Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 26

72 Data Sheet Performance and Scalability Numbers for All Switch Models Cisco Catalyst 2960-S Cisco Catalyst 2960 Cisco Catalyst TC-L Cisco Catalyst LT-L Cisco Catalyst PC-L Cisco Catalyst TT-L Cisco Catalyst TC-L Cisco Catalyst PST-L Cisco Catalyst 2960G-8TC-L Cisco Catalyst 2960G-24TC-L Cisco Catalyst 2960G-48TC-L 6.5 mpps 6.5 mpps 6.5 mpps 10.1 mpps 10.1 mpps 13.3 mpps 11.9 mpps 35.7 mpps 39.0 mpps Resource: Cisco Catalyst 2960-S and 2960 Default QoS Dual Unicast MAC Addresses IPv4 IGMP Groups IPv4 MAC QoS Access Control Entries (ACEs) IPv4 MAC Security ACEs * Switching bandwidth is maximum Switching capacity. Table 5. Dimensions, Weight, Acoustic, MTBF, and Environmental Range Dimensions (H x W x D) Cisco Catalyst 2960-S Inches Centimeters Cisco Catalyst 2960S-48FPD-L 1.75 x 17.5 x x 44.5 x 38.6 Cisco Catalyst 2960S-48LPD-L Cisco Catalyst 2960S-24PD-L Cisco Catalyst 2960S-48TD-L 1.75 x 17.5 x x 44.5 x 29.9 Cisco Catalyst 2960S-24TD-L Cisco Catalyst 2960S-48FPS-L 1.75 x 17.5 x x 44.5 x 38.6 Cisco Catalyst 2960S-48LPS-L Cisco Catalyst 2960S-24PS-L Cisco Catalyst 2960S-48TS-L 1.75 x 17.5 x x 44.5 x 29.9 Cisco Catalyst 2960S-24TS-L Cisco Catalyst 2960 Inches Centimeters Cisco Catalyst 2960PD-8TT-L 1.73 x 10.6 x x 27 x 15.7 Cisco Catalyst TC-L 1.73 x 10.6 x x 27 x 16.3 Cisco Catalyst TT-L 1.73 x 17.5 x x 44.5 x 23.6 Cisco Catalyst TC-L Cisco Catalyst LT-L Cisco Catalyst PC-L 1.73 x 17.5 x x 44.5 x 33.2 Cisco Catalyst TT-L Cisco Catalyst TC-L Cisco Catalyst PST-L 1.73 x 17.5 x x 44.5 x 23.6 Cisco Catalyst 2960G-8TC-L 1.73 x 10.6 x x 27 x 20.5 Cisco Catalyst 2960G-24TC-L 1.73 x 17.5 x x 44.5 x 32.8 Cisco Catalyst 2960G-48TC-L Weight Cisco Catalyst 2960-S Pounds Kilograms Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 26

73 Data Sheet Dimensions (H x W x D) Cisco Catalyst 2960-S Inches Centimeters Cisco Catalyst 2960S-48FPD-L Cisco Catalyst 2960S-48LPD-L Cisco Catalyst 2960S-24PD-L Cisco Catalyst 2960S-48TD-L Cisco Catalyst 2960S-24TD-L Cisco Catalyst 2960S-48FPS-L Cisco Catalyst 2960S-48LPS-L Cisco Catalyst 2960S-24PS-L Cisco Catalyst 2960S-48TS-L Cisco Catalyst 2960S-24TS-L Cisco Catalyst 2960 Pounds Kilograms Cisco Catalyst 2960PD-8TT-L Cisco Catalyst TC-L Cisco Catalyst TT-L Cisco Catalyst TC-L Cisco Catalyst LT-L Cisco Catalyst PC-L Cisco Catalyst TT-L Cisco Catalyst TC-L Cisco Catalyst PST-L Cisco Catalyst 2960G-8TC-L Cisco Catalyst 2960G-24TC-L Cisco Catalyst 2960G-48TC-L Environmental Ranges Cisco Catalyst 2960-S Cisco Catalyst 2960 Fahrenheit Centigrade Fahrenheit Centigrade Operating Temperature up to 5000 ft (1500 m) 0º to 113ºF -5º to 45ºC 23º to 113ºF -5º to 45ºC Operating Temperature up to 10,000 ft (3000 m) 23º to 104ºF -5º to 40ºC 23º to 104ºF -5º to 40ºC Short-term Exception at Sea Level * 23º to 131ºF -5º to 55ºC 23º to 131ºF -5º to 55ºC Short-term Exception up to 5000 ft (1500 m) * 23º to 122ºF -5º to 50ºC 23º to 122ºF -5º to 50ºC Short-term Exception up to 10,000 ft (3000 m) * 23º to 113ºF -5º to 45ºC 23º to 113ºF -5º to 45ºC Short-term Exception up to 13,000 ft (4000 m) * 23º to 104ºF -5º to +40ºC 23º to 104ºF -5º to 40ºC Storage Temperature up to 15,000 ft (4573 m) -13º to 158ºF -25º to 70ºC -13º to 158ºF -25º to 70ºC Feet Meters Operating Altitude Up to 10,000 Up to 3000 Up to 10,000 Up to 3000 Operating Relative Humidity 10% to 95% noncondensing 10% to 95% noncondensing Storage Relative Humidity 10% to 95% noncondensing 10% to 95% noncondensing Acoustic Noise Measured per ISO 7779 and Declared per ISO Bystander Positions Operating Mode at 25 C ambient. Sound Pressure Sound Power Model LpA (Typical) LpAD (Maximum) LwA (Typical) LwAD (Maximum) Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 26

74 Data Sheet Dimensions (H x W x D) Cisco Catalyst 2960-S Inches Centimeters Cisco Catalyst 2960S-48FPD-L Cisco Catalyst 2960S-48LPD-L 42 db 45 db 5.2 B 5.5 B Cisco Catalyst 2960S-24PD-L Cisco Catalyst 2960S-48TD-L Cisco Catalyst 2960S-24TD-L 44 db 47 db 5.4 B 5.7 B Cisco Catalyst 2960S-48FPS-L Cisco Catalyst 2960S-48LPS-L 42 db 45 db 5.2 B 5.5 B Cisco Catalyst 2960S-24PS-L Cisco Catalyst 2960S-48TS-L Cisco Catalyst 2960S-24TS-L 44 db 47 db 5.4 B 5.7 B Mean Time Between Failures (MTBF) Cisco Catalyst 2960-S Cisco Catalyst 2960 Model MTBF in hours Model MTBF in hours Cisco Catalyst 2960S-48FPD-L 183,498 Cisco Catalyst 2960PD-8TT-L 737,065 Cisco Catalyst 2960S-48LPD-L 198,300 Cisco Catalyst TC-L 615,549 Cisco Catalyst 2960S-24PD-L 237,016 Cisco Catalyst TT-L 407,707 Cisco Catalyst 2960S-48TD-L 311,291 Cisco Catalyst TC-L 339,743 Cisco Catalyst 2960S-24TD-L 332,958 Cisco Catalyst LT-L 402,926 Cisco Catalyst 2960S-48FPS-L 189,242 Cisco Catalyst PC-L 311,781 Cisco Catalyst 2960S-48LPS-L 205,052 Cisco Catalyst TT-L 243,277 Cisco Catalyst 2960S-24PS-L 245,604 Cisco Catalyst TC-L 336,409 Cisco Catalyst 2960S-48TS-L 328,058 Cisco Catalyst PST-L 180,427 Cisco Catalyst 2960S-24TS-L 349,824 Cisco Catalyst 2960G-8TC-L 485,576 Cisco Catalyst 2960S-STACK 25,743,890 Cisco Catalyst 2960G-24TC-L 313,828 Cisco Catalyst 2960G-48TC-L 221,432 * Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences. Note: For Cisco Catalyst 2960G-8TC-L, reduce the high range temperature by 5 C. Table 6. Connectors, LED Indicators, and Dimensions Connectors and LED Indicators Cisco Catalyst 2960-S with SFP+ based ports: 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX, -BX, -T, * -FX, * and coarse wavelength-division multiplexing (CWDM) SFP-based ports: LC fiber connectors (single/multimode fiber) 10GBASE-LR, SR, LRM, CX1 SFP+ based ports * The Cisco Catalyst 2960-S with SFP+ does not support the GLC-FE-100BX, GLC-FE-100FX, GLC-T, or GLC-FE-100LX. Cisco Catalyst 2960-S and 2960 with SFP-based ports: 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 UTP cabling 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-T SFP-based ports ** : RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-SX -LX/LH, -ZX, -BX, -T, * -FX, * and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) 100BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimode fiber) * GLC-T and GLC-GE-100FX are not supported on the Cisco Catalyst TC-S, TC-L, or 2960G-8TC-L switches Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 26

75 Data Sheet Connectors and LED Indicators ** 1000BASE-T not supported on Cisco Catalyst 2960-S switches. Cisco Catalyst 2960-S FlexStack stacking cables: CAB-STK-E-0.5M CAB-STK-E-1M CAB-STK-E-3M Cisco Catalyst 2960-S console cables: CAB-CONSOLE-RJ45 CAB-CONSOLE-USB FlexStack stacking cable with a 0.5 m length FlexStack stacking cable with a 1.0 m length FlexStack stacking cable with a 3.0 m length Console cable 6 ft with RJ-45 Console cable 6 ft with USB Type A and mini-b connectors Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. These switches do not have a redundant-power-supply port. The internal power supply is an auto-ranging unit The internal power supply supports input voltages between 100 and 240 VAC Use the supplied AC power cord to connect the AC power connector to an AC power outlet. Cisco RPS connector: The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch. The connector offers a 2300W redundant power system that supports up to 6 external network devices and provides power to 2 failed devices at a time. The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic. Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. Note: The Cisco Catalyst TC-L and 2960G-8TC-L do not have RPS ports. Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, link status, link duplex, PoE, and link speed Table 7. Description Management and Standards Support for Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software Specification Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 26

76 Data Sheet Description Management Standards Specification BRIDGE-MIB CISCO-CABLE-DIAG-MIB CISCO-CDP-MIB CISCO-CLUSTER-MIB CISCO-CONFIG-COPY-MIB CISCO-CONFIG-MAN-MIB CISCO-DHCP-SNOOPING-MIB CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-ENVMON-MIB CISCO-ERR-DISABLE-MIB CISCO-FLASH-MIB CISCO-FTP-CLIENT-MIB CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB CISCO-IP-STAT-MIB CISCO-LAG-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MEMORY-POOL-MIB CISCO-PAGP-MIB CISCO-PING-MIB CISCO-POE-EXTENSIONS-MIB CISCO-PORT-QOS-MIB CISCO-PORT-SECURITY-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-PRODUCTS-MIB CISCO-PROCESS-MIB CISCO-RTTMON-MIB CISCO-SMI-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOG-MIB IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab (LLDP) IEEE 802.3ad IEEE 802.3af IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification CISCO-TC-MIB CICSO-TCP-MIB CISCO-UDLDP-MIB CISCO-VLAN-IFTABLE RELATIONSHIP-MIB CISCO-VLAN-MEMBERSHIP-MIB CISCO-VTP-MIB ENTITY-MIB ETHERLIKE-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB IF-MIB INET-ADDRESS-MIB OLD-CISCO-CHASSIS-MIB OLD-CISCO-FLASH-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB RFC1213-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-MPD-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMPv2-MIB TCP-MIB UDP-MIB epm MIB CISCO-STACKWISE-MIB (2960-S) 100BASE-BX (SFP) 100BASE-FX (SFP) 100BASE-LX (SFP) 1000BASE-BX (SFP) 1000BASE-SX (SFP) 1000BASE-LX/LH (SFP) 1000BASE-ZX (SFP) 1000BASE-CWDM SFP 1470 nm 1000BASE-CWDM SFP 1490 nm 1000BASE-CWDM SFP 1510 nm 1000BASE-CWDM SFP 1530 nm 1000BASE-CWDM SFP 1550 nm 1000BASE-CWDM SFP 1570 nm 1000BASE-CWDM SFP 1590 nm 1000BASE-CWDM SFP 1610 nm 10GBASE-LR (SFP+) 10GBASE-SR (SFP+) 10GBASE-LRM (SFP+) 10GBASE-CX1 (SFP+) RMON I and II standards SNMP v1, v2c, and v Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 26

77 Data Sheet Description RFC Compliance Specification RFC UDP RFC TFTP RFC IP RFC ICMP RFC TCP RFC ARP RFC Telnet RFC Bootstrap Protocol (BOOTP) RFC FTP RFC IP Multicast and IGMP RFC SNMP v1 RFC IP Addresses RFC Internet Control Message Protocol (ICMP) Router Discovery RFC NTP RFC TACACS+ RFC Bridge MIB RFC BOOTP extensions RFC Ethernet Interface MIB RFC RMON RFC SNMP v2c RFC SNMP v2 RFC Maximum Transmission Unit (MTU) Path Discovery IPv6 FRC HTTP RFC DHCP RFC RADIUS RFC IF MIB v3 RFC IPv6 Aggregatable Addrs RFC IPv6 RFC IPv6 Neighbor Discovery RFC IPv6 Autoconfiguration RFC ICMP IPv6 RFC Differentiated Services (DiffServ) Precedence RFC Assured Forwarding RFC Expedited Forwarding RFC SNMP Management RFC DHCP Relay Agent Information Option RFC IGMP v3 RFC X RADIUS Table 8. Voltage and Power Information AC/DC Input Voltage and Current Cisco Catalyst 2960-S Voltage (Autoranging) Current Frequency Cisco Catalyst 2960S-48FPD-L 100 to 240 VAC 9 to 4 A 50 to 60Hz Cisco Catalyst 2960S-48LPD-L 5 to 2 A Cisco Catalyst 2960S-24PD-L 5 to 2 A Cisco Catalyst 2960S-48TD-L 1 to 0.5 A Cisco Catalyst 2960S-24TD-L 1 to 0.5 A Cisco Catalyst 2960S-48FPS-L 9 to 4 A Cisco Catalyst 2960S-48LPS-L 5 to 2 A Cisco Catalyst 2960S-24PS-L 5 to 2 A Cisco Catalyst 2960S-48TS-L 1 to 0.5 A Cisco Catalyst 2960S-24TS-L 1 to 0.5 A Cisco Catalyst 2960 Voltage (Autoranging) Current Frequency Cisco Catalyst TC-L 100 to 240 VAC 0.5 to 0.25 A 50 to 60Hz Cisco Catalyst 2960G-8TC-L 0.8 to 0.4 A Cisco Catalyst LT-L 3.0 to 1.5 A Cisco Catalyst PC-L 8.0 to 4.0 A Cisco Catalyst PST-L 5.0 to 2.0 A Cisco Catalyst TT-L and Cisco Catalyst TC-L and Cisco Catalyst TT-L and Cisco Catalyst TC-L 1.3 to 0.8 A Cisco Catalyst 2960G-24TC-L and Cisco Catalyst 2960G-48TC-L 3.0 to 1.5 A Cisco Catalyst 2960PD-8TT-L DC input 48 VDC 0.3 A (for AC use PWR-A= sold separately) Power Rating Cisco Catalyst 2960-S Cisco Catalyst 2960 Model Power Rating Model Power Rating Cisco Catalyst 2960S-48FPD-L 0.89 kva Cisco Catalyst 2960PD-8TT-L 11W Cisco Catalyst 2960S-48LPD-L 0.48 kva Cisco Catalyst TC-L kva Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 26

78 Data Sheet AC/DC Input Voltage and Current Cisco Catalyst 2960S-24PD-L 0.46 kva Cisco Catalyst TT-L 0.05 kva Cisco Catalyst 2960S-48TD-L 0.09 kva Cisco Catalyst TT-L kva Cisco Catalyst 2960S-24TD-L 0.09 kva Cisco Catalyst TC-L 0.05 kva Cisco Catalyst 2960S-48FPS-L 0.89 kva Cisco Catalyst LT-L kva Cisco Catalyst 2960S-48LPS-L 0.48 kva Cisco Catalyst PC-L kva Cisco Catalyst 2960S-24PS-L 0.46 kva Cisco Catalyst PST-L 0.5 kva Cisco Catalyst 2960S-48TS-L 0.13 kva Cisco Catalyst TC-L kva Cisco Catalyst 2960S-24TS-L 0.09 kva Cisco Catalyst 2960G-8TC-L 0.05 kva Cisco Catalyst 2960G-24TC-L Cisco Catalyst 2960G-48TC-L kva kva DC Input Voltages (RPS Input) Cisco Catalyst 2960-S Cisco Catalyst 2960S-48FPD-L 12V at 4 A -52 V at 15 A Cisco Catalyst 2960S-48LPD-L 12V at 4 A -52 V at 8 A Cisco Catalyst 2960S-24PD-L 12V at 3 A -52 V at 8 A Cisco Catalyst 2960S-48TD-L 12V at 4 A N/A Cisco Catalyst 2960S-24TD-L 12V at 3 A N/A Cisco Catalyst 2960S-48FPS-L 12V at 4 A -52 V at 15A Cisco Catalyst 2960S-48LPS-L 12V at 4 A -52 V at 8 A Cisco Catalyst 2960S-24PS-L 12V at 3 A -52 V at 8 A Cisco Catalyst 2960S-48TS-L 12V at 4 A N/A Cisco Catalyst 2960S-24TS-L 12V at 4 A N/A Cisco Catalyst 2960-S Cisco Catalyst TT-L Cisco Catalyst TT-L Cisco Catalyst TC-L 12V at 5 A 5 A Cisco Catalyst LT-L 12 V at 8.3 A -48 V at 2.7 A Cisco Catalyst PC-L 12 V at A -48 V at 7.8 A Cisco Catalyst PST-L 12 V at 4 A -48 V at 7.8 A Cisco Catalyst TC-L Cisco Catalyst 2960G-24TC-L 12 V at 5 A 12 V at 10.5 Cisco Catalyst 2960G-48TC-L No RPS input for Cisco Catalyst 2960PD-8TT-L, Cisco Catalyst TC-L, or Cisco Catalyst 2960G-8TC-L. PoE and PoE+ Maximum power supplied per port for PoE+ is 30W. Maximum power supplied per port for PoE is 15.4W. Total power dedicated to PoE or PoE+ is 370W or 740W. Table 9. Description Power Specifications for Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software C2960-S Specifications Models C2960S-48FPD-L C2960S-48LPD-L C2960S-24PD-L C2960S-48TD-L C2960S-24TD-L 100 Percent Throughput Measured Power Consumption 81W 71W 55W 55W 39W 5 Percent Throughput Measured Power Consumption 80W 70W 54W 53W 38W Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 18 of 26

79 Data Sheet 5 Percent Throughput (with 50 Percent PoE Loads) Measured Power Consumption Switch Power: 464W PoE Power: 386W Switch Power: 266W PoE Power: 195W Switch Power: 249W PoE Power: 195W Percent Throughput (with Maximum Possible PoE Loads) Measured Power Consumption Switch Power: 870W PoE Power: 744W Switch Power: 466W PoE Power: 375W Switch Power: 451W PoE Power: 375W - - Description C2960-S Specifications Models C2960S-48FPS-L C2960S-48LPS-L C2960S-24PS-L C2960S-48TS-L C2960S-24TS-L 100 Percent Throughput Measured Power Consumption 79W 71W 55W 52W 40W 5 Percent Throughput Measured Power Consumption 78W 70W 54W 50W 39W 5 Percent Throughput (with 50 Percent PoE Loads) Measured Power Consumption Switch Power: 463W PoE Power: 744W Switch Power: 266W PoE Power: 375W Switch Power: 249W PoE Power: 375W Percent Throughput (with Maximum Possible PoE Loads) Measured Power Consumption Switch Power: 870W PoE Power: 744W Switch Power: 466W PoE Power: 375W Switch Power: 449W PoE Power: 375W - - Description C2960 Specifications Models C PST-L C PC-L C LT-L C TC-L C TC-L 100 Percent Throughput Measured Power Consumption 67W 45W 36W 39W 27W 5 Percent Throughput Measured Power Consumption 63W 43W 34W 36W 24W 5 Percent Throughput (with 50 Percent PoE Loads) Measured Power Consumption Switch Power: 262W PoE Power: 187W Switch Power: 237W PoE Power: 185W Switch Power: 98W PoE Power: 62W Percent Throughput (with Maximum Possible PoE Loads) Measured Power Consumption Switch Power: 460W PoE Power: 339W Switch Output: 413W Switch Power: 433W PoE Power: 357W Switch Output: 259W Switch Power: 162W PoE Power: 119W Switch Output: 147W Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 26

80 Data Sheet Description C2960 Specifications Models C TT-L C TT-L C2960G-48TC-L C2960G-24TC-L C T-L 100 Percent Throughput Measured Power Consumption 42W 28W 123W 72W 22W 5 Percent Throughput Measured Power Consumption 38W 26W 114W 65W 21W 5 Percent Throughput (with 50 Percent PoE Loads) Measured Power Consumption Percent Throughput (with Maximum Possible PoE Loads) Measured Power Consumption Description C2960 Specifications Models C2960-8TC-L C2960PD-8TT-L C2960G-8TC-L 100 Percent Throughput Measured Power Consumption 20W 11W 36W 5 Percent Throughput Measured Power Consumption 20W 11W 36W 5 Percent Throughput (with 50 Percent PoE Loads) Measured Power Consumption 20W 11W 36W 100 Percent Throughput (with Maximum Possible PoE Loads) Measured Power Consumption 20W 11W 36W Note: Disclaimer: All power consumption numbers were measured under controlled laboratory conditions and are provided as an estimate. The wattage rating on the power supply does not represent actual power draw. It indicates the maximum power draw possible by the power supply. This rating can be used for facility capacity planning. For PoE switches, cooling requirements are smaller than the actual power consumption as a significant portion of PoE loads are dissipated in the endpoints. Non-PoE Power Consumption 100 Percent Throughput Switch Power Consumption The numbers indicate the power consumed by a typical switch under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar, and relative humidity from 30 to 75 percent. Typically such power draws are only seen when encountering a 100 percent traffic load made up entirely of 64-byte packets on the switch and the uplinks. 5 Percent Throughput Switch Power Consumption The numbers indicate the power consumed by a typical switch under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar, and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent traffic load on the switch and its uplinks. PoE Power Consumption 100 Percent Throughput Switch Power Consumption (No PoE Loads) The numbers indicate the power consumed by a typical switch under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar, and relative humidity from 30 to 75 percent. Typically such power draws are only seen when encountering a 100 percent traffic load made up entirely of 64-byte packets with no PoE loads on the switch and uplinks Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 26

81 Data Sheet Measured 5 Percent Throughput Switch Power Consumption (No PoE Loads) The numbers indicate the power consumed by a typical switch under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent traffic load on the switch and its uplinks 100 Percent Throughput Switch Power Consumption (with Maximum PoE Loads) The numbers indicate the power consumed by a typical system (the switch and the corresponding PoE loads) under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity from 30 to 75 percent. Typically this power draw is realized when a switch is running 100 percent traffic load of 64 byte sized packets on all its ports and uplinks and also drawing 100 percent PoE load. 5 Percent Throughput Switch Power Consumption (with 50 Percent PoE Loads) The numbers indicate the power consumed by a typical system (the switch and the corresponding PoE loads) under normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent traffic load and 50 percent PoE load on the switch and its uplinks. Table 10. Description Safety and Compliance Specification Safety Certifications Electromagnetic Emissions Certifications UL , Second Edition CAN/CSA 22.2 No , Second Edition TUV/GS to EN , Second Edition CB to IEC Second Edition with all country deviations CE Marking NOM (through partners and distributors) FCC Part 15 Class A EN Class A (CISPR22) EN (CISPR24) AS/NZS CISPR22 Class A VCCI Class A CE CNS13438 Class A MIC GOST China EMC Certifications Environmental Reduction of Hazardous Substances (ROHS) 5 Telco Warranty Common Language Equipment Identifier (CLEI) code Limited lifetime warranty Cisco Limited Lifetime Hardware Warranty Cisco Catalyst 2960-S and 2960 Series Switches come with a limited lifetime warranty (Table 11). The warranty for the Cisco 2960-S Series switches has the same terms as our standard limited lifetime warranty plus the addition of next business day delivery of replacement hardware where available and 90 days of 8x5 Cisco Technical Assistance Center (TAC) support. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For further information on warranty terms, visit Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 21 of 26

82 Data Sheet Table 11. Limited Lifetime Warranty Terms Device Covered Cisco Limited Lifetime Hardware Warranty Applies to Cisco Catalyst 2960 Series Switches sold on or after May 1, 2009 Cisco Enhanced Limited Lifetime Hardware Warranty Applies to Cisco Catalyst 2960-S Series Switches Warranty Duration End-of-life policy As long as the original end user continues to own or use the product, provided that: fan and power supply warranty is limited to five (5) years. In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the announcement of discontinuance. As long as the original end user continues to own or use the product, provided that: fan and power supply warranty is limited to five (5) years. In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the announcement of discontinuance. Hardware replacement Effective date Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of the RMA request. Actual delivery times might vary depending on customer location. Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than ninety [90] days after original shipment by Cisco). Cisco or its service center will use commercially reasonable efforts to ship a replacement for next business day delivery, where available. Otherwise, a replacement will be shipped within ten (10) working days after receipt of the RMA request. Actual delivery times might vary depending on customer location. Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than ninety [90] days after original shipment by Cisco). TAC support Not included. Cisco will provide during customer s local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of devicelevel problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst S product. This support does not include solution or network-level support beyond the specific device under consideration. Cisco.com Access Warranty allows guest access only to Cisco.com Warranty allows guest access only to Cisco.com Software Update Policy for Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software Customers with Cisco Catalyst LAN Base software licenses will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier. Customers with licenses for our premium software images, Enterprise Services or IP Services, require a service support contract such as Cisco SMARTnet Service to download updates. This policy supersedes any previous warranty or software statement and is subject to change without notice. Cisco and Partner Services for the Cisco Catalyst 2960 Minimize operating costs and reduce power consumption with the Cisco Catalyst 2960 Switch using intelligent, personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the Cisco Catalyst into your architecture and incorporate network services onto it. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support services designed to meet your business needs and help you maintain high-quality network performance while controlling operational costs. Table 12 lists the technical services available for the Cisco Catalyst 2960-S and 2960 Series Switches Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 22 of 26

83 Data Sheet Table 12. Technical Services Available for Cisco Catalyst 2960-S and 2960 Series Switches Technical Services Cisco SMARTnet Service Around-the-clock, global access to the Cisco TAC Unrestricted access to the extensive Cisco.com knowledge base and tools Next-business-day, 8x5x4, 24x7x4, or 24x7x2 advance hardware replacement and onsite parts replacement and installation available 1 Ongoing operating system software updates within the licensed feature set 2 Cisco Smart Foundation Service Next-business-day advance hardware replacement as available Access to SMB TAC during business hours (access levels vary by region) Access to Cisco.com SMB knowledge base Online technical resources through Smart Foundation Portal Operating system software bug fixes and patches Cisco Smart Care Service Network-level coverage for the needs of small and medium-sized businesses Proactive health checks and periodic assessments of Cisco network foundation, voice, and security technologies Technical support for eligible Cisco hardware and software through Smart Care Portal Cisco operating system and application software updates and upgrades 2 Next-business-day advance hardware replacement as available, 24x7x4 option available 1 Cisco SP Base Service Around-the-clock, global access to the Cisco TAC Registered access to Cisco.com Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available 1 Ongoing operating system software updates 2 Cisco Focused Technical Support Services Three levels of premium, high-touch services are available Cisco High-Touch Operations Management Service Cisco High-Touch Technical Support Service Cisco High-Touch Engineering Service Valid Cisco SMARTnet or SP Base contracts are required on all network equipment. Ordering Information Tables 13, 14, and 15 give ordering information for the Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base software. Table 13. Ordering Information for Cisco Catalyst 2960-S Series Switches with LAN Base Software Part Numbers Description 10 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity WS-C2960S-48FPD-L WS-C2960S-48LPD-L 48 Ethernet 10/100/1000 PoE+ ports 740W PoE capacity 2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports Optional Cisco FlexStack stacking support LAN Base image 48 Ethernet 10/100/1000 PoE+ ports 370W PoE capacity 2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports Optional Cisco FlexStack stacking support LAN Base image 1 Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with next-business-day (NBD) delivery. Where NBD is not available, same day shipping is provided. Restrictions apply; please review the appropriate service descriptions for details. 2 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 23 of 26

84 Data Sheet Part Numbers WS-C2960S-24PD-L WS-C2960S-48TD-L WS-C2960S-24TD-L Description 24 Ethernet 10/100/1000 PoE+ ports 370W PoE capacity 2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports Optional Cisco FlexStack stacking support LAN Base image 48 Ethernet 10/100/1000 ports 2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports Optional Cisco FlexStack stacking support LAN Base image 24 Ethernet 10/100/1000 ports 2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports Optional Cisco FlexStack stacking support LAN Base image 1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity WS-C2960S-48FPS-L WS-C2960S-48LPS-L WS-C2960S-24PS-L WS-C2960S-48TS-L WS-C2960S-24TS-L C2960S-STACK 48 Ethernet 10/100/1000 PoE+ ports 740W PoE capacity 4 1 Gigabit Ethernet SFP uplink ports Optional Cisco FlexStack stacking support LAN Base image 48 Ethernet 10/100/1000 PoE+ ports 370W PoE capacity 4 1 Gigabit Ethernet SFP uplink ports Optional Cisco FlexStack stacking support LAN Base image 24 Ethernet 10/100/1000 PoE+ ports 370W PoE capacity 4 1 Gigabit Ethernet SFP uplink ports Optional Cisco FlexStack stacking support LAN Base image 48 Ethernet 10/100/1000 ports 4 1 Gigabit Ethernet SFP uplink ports Optional Cisco FlexStack stacking support LAN Base image 24 Ethernet 10/100/1000 ports 4 1 Gigabit Ethernet SFP uplink ports Optional Cisco FlexStack stacking support LAN Base image Optional FlexStack hot-swappable stacking module, a.5m stack cable is included with the module. Optional 1m and 3m cables are also available. Table 14. Ordering Information for Cisco Catalyst 2960 Series Switches with LAN Base Software Part Numbers WS-C2960PD-8TT-L WS-C2960-8TC-L WS-C TT-L Description 8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port Power adaptor (PWR-A=) and power cord sold separately Compact size with no fan; magnet included LAN Base image 8 Ethernet 10/100 ports 1 dual-purpose uplink (dual-purpose uplink port has 1 10/100/1000 Ethernet port,1 SFP-based Gigabit Ethernet port, 1 port active) Compact size with no fan; magnet included LAN Base image 24 Ethernet 10/100 ports and 2 10/100/1000 uplinks 1 RU fixed-configuration LAN Base image Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 24 of 26

85 Data Sheet Part Numbers WS-C TT-L WS-C LT-L WS-C PC-L WS-C PST-L Description 48 Ethernet 10/100 ports and 2 10/100/1000 uplinks 1 RU fixed-configuration LAN Base image 24 Ethernet 10/100 ports with 8 PoE ports and 2 10/100/1000 uplinks 1 RU fixed-configuration LAN Base image 24 Ethernet 10/100 PoE ports and 2 dual-purpose uplinks 1 RU fixed-configuration LAN Base image 48 Ethernet 10/100 PoE ports and 2 10/100/1000 uplinks and 2 SFP uplinks 1 RU fixed-configuration LAN Base image WS-C TC-L 48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) 1 RU fixed-configuration LAN Base image WS-C2960G-8TC-L 7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Compact size with no fan; magnet included LAN Base image WS-C2960G-24TC-L 20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) 1 RU fixed-configuration LAN Base image WS-C2960G-48TC-L 44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) 1 RU fixed-configuration LAN Base image Table 15. Ordering Information for Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software Accessories Part Numbers CAB-STK-E-0.5M= CAB-STK-E-1M= CAB-STK-E-3M= CAB-CONSOLE-RJ45 CAB-CONSOLE-USB CAB-16AWG-AC Description FlexStack stacking cable with a 0.5 m length FlexStack stacking cable with a 1.0 m length FlexStack stacking cable with a 3.0 m length Console cable 6 ft with RJ45 Console cable 6 ft with USB Type A and mini-b connectors AC power cord, 16AWG CAB-ACE AC power cord (Europe), C13, CEE 7, 1.5M CAB-L620P-C13-US Power cord, 250VAC, 15A, NEMA L6-20 to C13, US CAB-ACI AC power cord (Italy), C13, CEI 23-16, 2.5m CAB-ACU AC power cord (UK), C13, BS 1363, 2.5m CAB-ACA AC power cord (China/Australia), C13, AS 3112, 2.5m CAB-ACS AC power cord (Switzerland), C13, IEC , 2.5m CAB-ACR AC power cord (Argentina), C13, EL 219 (IRAM 2073), 2.5m CAB-ACC CAB-JPN-12A CAB-L620P-C13-JPN CAB-IND PWR-RPS2300 BLNK-RPS2300= Power cord (China) 10A, IEC 320, C13 (APN=CS-PWR-CH) CABASY,POWER CORD, JAPAN 2P, PSE, Power cord (Japan) 250VAC, 15A, NEMA L6-20 to C13, JAPAN Power cord (India) Cisco Redundant Power System 2300 and blower, no power supply Spare bay insert for Cisco Redundant Power System 2300 for Cisco Catalyst 2960 and Cisco Catalyst 2960-S switches Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 25 of 26

86 Data Sheet Part Numbers CAB-RPS2300-E= CAB-RPS2300= Description Spare RPS2300 cable for Cisco Catalyst PST-L, PC-L and LT-L switches and Cisco Catalyst 2960-S switches Spare RPS2300 cable for Cisco Catalyst 2960 except as noted with CAB-RPS2300-E above BLWR-RPS2300= Spare 45 CFM blower for Cisco Redundant Power System 2300 C3K-PWR-750WAC= PWR-A= CBLGRD-C2960-8TC= CBLGRD-C2960G-8TC= RCKMNT-19-CMPCT= RCKMNT-1RU= RCKMNT-REC-1RU= GLC-LH-SM= GLC-SX-MM= GLC-ZX-SM= GLC-T= GLC-BX-D= GLC-BX-U= GLC-GE-100FX= GLC-FE-100FX= GLC-FE-100LX= GLC-FE-100BX-D= GLC-FE-100BX-U= CWDM-SFP-1470= CWDM-SFP-1490= CWDM-SFP-1510= CWDM-SFP-1530= CWDM-SFP-1550= CWDM-SFP-1570= CWDM-SFP-1590= CWDM-SFP-1610= CAB-SM-LCSC-1M CAB-SM-LCSC-5M SFP-10G-LR= SFP-10G-SR= SFP-10G-LRM= SFP-H10GB-CU1M= SFP-H10GB-CU3M= SFP-H10GB-CU5M= Cisco Catalyst 2960 and Cisco Catalyst 2960-S RPS W AC power supply spare Power adapter for Cisco Catalyst 2960PD-8TT-L compact switch Cable guard for Cisco Catalyst TC compact switch Cable guard for Cisco Catalyst 2960G-8TC compact switch Rack mount for Cisco Catalyst TC and Cisco Catalyst 2960G-8TC compact switches Spare rack-mount kit for Cisco Catalyst 2960 and 2960-S Series for 19- and 24-inch racks 1 RU recessed rack-mount kit for Cisco Catalyst 2960 and 2960-S Series 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength 1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength 1000BASE-T SFP transceiver module for Category 5 copper wire Not supported on the Cisco Catalyst TC and Cisco Catalyst 2960G-8TC compact switches or 2960-S with SFP+ 1000BASE-BX10 SFP transceiver module for single strand SMF, 1490-nm TX/1310-nm RX wavelength 1000BASE-BX10 SFP transceiver module for single strand SMF, 1310-nm TX/1490-nm RX wavelength 100BASE-FX SFP module for Gigabit Ethernet ports, 1310-nm wavelength, 2 km over MMF Not supported on the Cisco Catalyst TC and Cisco Catalyst 2960G-8TC compact switches 100BASE-FX SFP module for 100-Mb ports, 1310-nm wavelength, 2 km over MMF 100BASE-LX10 SFP module for 100-Mb ports, 1310-nm wavelength, 10 km over SMF 100BASE-BX10-D SFP module for 100-Mb ports, 1550-nm TX/1310-nm RX wavelength, 10 km over single-strand SMF 100BASE-BX10-U SFP module for 100-Mb ports, 1310-nm TX/1550-nm RX wavelength, 10 km over single-strand SMF Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G Fibre Channel (FC) (gray) Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (violet) Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue) Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green) Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (yellow) Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange) Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red) Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1G/2G FC (brown) 1m fiber single-mode LC-to-SC connectors 5m fiber single-mode LC-to-SC connectors 10GBASE-LR SFP+ module 10GBASE-SR SFP+ module 10GBASE-LRM SFP+ module 10GBASE-CU SFP+ Cable 1 Meter 10GBASE-CU SFP+ Cable 3 Meter 10GBASE-CU SFP+ Cable 5 Meter Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 26 of 26

87 Data Sheet For more information about Cisco products, contact: United States and Canada: (toll free) NETS (6387) Europe: Australia: Other: World Wide Web URL: Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 27 of 26

88 Data Sheet Cisco Aironet 1140 Series Access Point Performance with Investment Protection Six times faster than a/g networks Backward-compatible with a/b/g clients M-Drive technology optimizes RF Taking Business Mobility Mainstream The Cisco Aironet 1140 Series Access Point is a business-ready, n access point designed for simple deployment and energy efficiency. The high-performance platform, which offers at least six times the throughput of existing a/g networks, prepares the business for the next wave of mobile devices and applications. Building on the Cisco Aironet heritage of RF excellence, the 1140 Series combines the industry s most widely deployed n technology with a sleek industrial design that blends seamlessly into any enterprise environment. Designed for sustainability, the 1140 Series delivers high performance from standard 802.3af Power over Ethernet while decreasing waste with multiunit eco-packs and Energy Star certified power supplies. As part of the Cisco Unified Wireless Network, the 1140 Series provides the industry s lowest total cost of ownership and investment protection by integrating seamlessly with the existing network. RF Excellence The Cisco Unified Wireless Network with M-Drive technology removes the mystery associated with design, implementation, and ongoing optimization of enterprise wireless networks. With Cisco M-Drive technology, IT has the tools needed to build and operate a high performance wireless network without the need for extensive RF engineering skills. Cisco M-Drive technology is a systemwide approach that manages the corporate RF spectrum, improves wireless coverage, and increases system capacity and performance. Features include: Easy Installation and Power Efficient n performance with existing PoE switches Sleek design blends into a variety of indoor environments Secure Interoperability n compliant Intel Connect with Centrino Certified Simplified Network Management Controller-based or standalone deployment options CleanAir 1 technology reduces troubleshooting and performance impacts Secure Connections Supports rogue access point detection and denial of service attacks Management frame protection detects malicious users and alerts network administrators Greater Network Capacity Dynamic frequency selection 2 (DFS-2) compliant Easy-to-Install, Multipurpose Mounting Bracket Designed for easy replacement of existing access points UL 2043 plenum rated for above ceiling installation options or suspended from drop ceilings. Locks for theft protection Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce dead spots and help ensure high availability client connections. RRM optimizes network capacity and mitigates interference by continuously monitoring and adjusting access point power and channel settings and then load balancing clients to enhance wireless coverage Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 6

89 Data Sheet CleanAir 1 technology: Only Cisco offers a comprehensive solution to detect, classify, locate, and mitigate sources of interference, including non-wi-fi sources such as Bluetooth, microwave ovens, cordless phones, and more. With the ability to visualize performance-impacting interference directly from Wireless Control System (WCS), you can proactively manage the challenges of a shared wireless spectrum and optimize network performance. Environmentally Responsible The Cisco Aironet 1140 Series offers n performance with standard 802.3af Power over Ethernet (PoE). At only watts of power, the 1140 Series is the only platform to combine the power of dual-radio n with the efficiency of standard PoE. Additionally, the 1140 Series is designed to operate more efficiently during off-peak hours when fewer clients are connected to the access point. For quicker staging and installation, you can order the 1140 Series in multiunit eco-packs, which offer 10 Unified or 5 Standalone access points in a single, easy-to-open carton. Eco-packs reduce product packaging by 50 percent, preserving natural resources and reducing emissions. By eliminating unnecessary components and offering digital instead of paper documentation, the 1140 Series eco-packs will save over 2200 trees per year, which is equal to the amount of power required to heat over 65 homes for an entire year. Product Specifications Table 1 lists the product specifications for Cisco Aironet 1140 Series Access Points. Table 1. Item Product Specifications for Cisco Aironet 1140 Series Access Points Specification Part Numbers Software Draft n Version 2.0 (and Related) Capabilities Data Rates Supported Cisco Aironet 1140 Series Access Point AIR-LAP1142N-x-K9 Dual-band Controller-based a/g/n AIR-LAP1141N-x-K9 Single-band Controller-based g/n AIR-AP1142N-x-K9 Dual-band Standalone a/g/n AIR-AP1141N-x-K9 Single-band Standalone g/n AIR-LAP1142-xK9-PR Eco-pack (dual-band a/g/n) 10 quantity Controller-based access points AIR-AP1142-xK9-5PR Eco-pack (dual-band a/g/n) 5 quantity Standalone access points Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, please visit Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List. Cisco Unified Wireless Network Software Release 6.0 or later. Cisco IOS Software Release 12.4(21a)JA 2x3 multiple-input multiple-output (MIMO) with two spatial streams Maximal ratio combining (MRC) Legacy beamforming (hardware supports this capability; not yet enabled in software) 20- and 40-MHz channels PHY data rates up to 300 Mbps Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) dynamic frequency selection (DFS) (Bin 5) Cyclic shift diversity (CSD) support a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps n data rates (2.4 GHz and 5 GHz): MCS Index 2 GI 3 = 800ns GI = 400ns 1 Requires Cisco Wireless Control System and Cisco Spectrum Expert Wi-Fi 2 MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the coding rate, and data rate values Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6

90 Data Sheet Item Specification 20-MHz Rate (Mbps) 40-MHz Rate (Mbps) 20-MHz Rate (Mbps) 40-MHz Rate (Mbps) Frequency Band and 20- MHz Operating Channels A (Americas (FCC)): to GHz; 11 channels to GHz; 8 channels to GHz, 8 channels (excludes to GHz) to GHz; 5 channels C (China): to GHz; 13 channels to GHz; 5 channels E (ETSI): to GHz; 13 channels to GHz; 8 channels to GHz, 11 channels I (Middle East): to GHz, 13 channels to GHz; 8 channels K (Korea): to GHz; 13 channels to GHz; 8 channels to GHz, 7 channels to GHz, 4 channels N (Non-FCC): to GHz; 11 channels to GHz; 8 channels to GHz; 5 channels P (Japan2): to GHz; 13 channels to GHz; 8 channels S (Singapore): to GHz; 13 channels to GHz; 8 channels to GHz; 5 channels T (Taiwan): to GHz; 11 channels to GHz; 3 channels to GHz, 11 channels to GHz; 5 channels Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Maximum Number of Non- Overlapping Channels 2.4 GHz b/g: 20 MHz: n: 20 MHz: 3 40 MHz: 1 5 GHz a: 20 MHz: n: 20 MHz: MHz: 9 Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. 3 GI: A Guard Interval (GI) between symbols helps receivers overcome the effects of multipath delays Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6

91 Data Sheet Item Specification Receive Sensitivity b g a Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s Mb/s 2.4-GHz 2.4-GHz 5-GHz 5-GHz n (HT20) n (HT40) n (HT20) n (HT40) -88 MCS0-85 MCS0-91 MCS0-78 MCS0-87 MCS1-85 MCS1-91 MCS1-78 MCS1-86 MCS2-83 MCS2-90 MCS2-78 MCS2-83 MCS3-80 MCS3-87 MCS3-78 MCS3-80 MCS4-77 MCS4-84 MCS4-78 MCS4-76 MCS5-72 MCS5-79 MCS5-75 MCS5-74 MCS6-71 MCS6-77 MCS6-73 MCS6-73 MCS7-70 MCS7-76 MCS7-72 MCS7-87 MCS8-85 MCS8-90 MCS8-76 MCS8-85 MCS9-82 MCS9-89 MCS9-76 MCS9-83 MCS10-80 MCS10-86 MCS10-76 MCS10-80 MCS11-76 MCS11-83 MCS11-76 MCS11-77 MCS12-73 MCS12-80 MCS12-76 MCS12-73 MCS13-69 MCS13-75 MCS13-71 MCS13-71 MCS14-67 MCS14-74 MCS14-69 MCS14-70 MCS15-66 MCS15-72 MCS15-68 MCS15 Maximum Transmit Power 2.4GHz b 20 dbm with 1 antenna g 17 dbm with 1 antenna n (HT20) 20 dbm with 2 antennas n (HT40) 20 dbm with 2 antennas 5GHz a 17 dbm with 1 antenna n non-ht duplicate (802.11a duplicate) mode 17 dbm with 1 antenna n (HT20) 20 dbm with 2 antennas n (HT40) 20 dbm with 2 antennas Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Available Transmit Power Settings 2.4GHz 20 dbm (100 mw) 17 dbm (50 mw) 14 dbm (25 mw) 11 dbm (12.5 mw) 8 dbm (6.25 mw) 5 dbm (3.13 mw) 2 dbm (1.56 mw) 1 dbm (0.78 mw) 5GHz 20 dbm (100 mw) 17 dbm (50 mw) 14 dbm (25 mw) 11 dbm (12.5 mw) 8 dbm (6.25 mw) 5 dbm (3.13 mw) 2 dbm (1.56 mw) 1 dbm (0.78 mw) Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Integrated Antenna 2.4 GHz, Gain 4.0 dbi, horizontal beamwidth GHz, Gain 3 dbi, horizontal beamwidth 360 Interfaces Indicators Dimensions (W x L x H) 10/100/1000BASE-T autosensing (RJ-45) Management console port (RJ45) Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors. Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm) 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6

92 Data Sheet Item Weight Environmental System Memory Input Power Requirements Powering Options Power Draw Warranty Compliance Calculated Mean Time Between Failure (MTBF) Specification 2.3 lbs (1.04 kg) Nonoperating (storage) temperature: 22 to 185 F ( 30 to 85 C) Operating temperature: 32 to104 F (0 to 40 C) Operating humidity: 10 to 90% percent (non-condensing) 128 MB DRAM 32 MB flash AP1140: 44 to 57 VDC Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz 802.3af Ethernet Switch Cisco AP1140 Power Injectors (AIR-PWRINJ4=) Cisco AP1140 Local Power Supply (AIR-PWR-A=) AP1140: W Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W. 90 days Standards Safety: UL CAN/CSA-C22.2 No UL 2043 IEC EN Radio approvals: FCC Part , RSS-210 (Canada) EN , EN (Europe) ARIB-STD 33 (Japan) ARIB-STD 66 (Japan) ARIB-STD T71 (Japan) AS/NZS (Australia and New Zealand) EMI and susceptibility (Class B) FCC Part and ICES-003 (Canada) VCCI (Japan) EN and -17 (Europe) EN EMC requirements for the Medical Directive 93/42/EEC IEEE Standard: IEEE a/b/g, IEEE n, IEEE h, IEEE d Security: i, Wi-Fi Protected Access 2 (WPA2), WPA 802.1X Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP) EAP Type(s): Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) Protected EAP (PEAP) v0 or EAP-MSCHAPv2 Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST) PEAPv1 or EAP-Generic Token Card (GTC) EAP-Subscriber Identity Module (SIM) Multimedia: Wi-Fi Multimedia (WMM ) Other: FCC Bulletin OET-65C RSS ,000 hours 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 6

93 Data Sheet Service and Support Cisco and Cisco Wireless LAN Specialized Partners offer a broad portfolio of end-to-end services based on proven methodologies for planning, designing, implementing, operating, and optimizing the performance of your wireless network. Cisco recommends the following services for the Cisco Aironet 1140 Series Access Points implementation: Cisco Wireless LAN n Readiness Assessment Service Prevent common challenges and reduce deployment costs by determining the readiness of your wired and wireless infrastructure. Cisco Wireless LAN n Migration Service Simplify the migration to high-performance, next generation n. Cisco Wireless LAN Optimization Service Evolve your n network to meet ever-changing network demands through planning and assessments, design, performance tuning, and ongoing support for system changes. For more information about Cisco n planning and deployment services, visit For More Information For more information about the Cisco Aironet 1140 Series, visit or contact your local account representative. Printed in USA C / Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 6

94 Data Sheet Cisco 5500 Series Wireless Controllers Maximum Performance and Scalability Support for up to 500 access points and 7000 clients n optimized for up to nine times the performance of a/g networks. Enhanced uptime with the ability to simultaneously configure and manage 500 access points per controller. Improved Mobility and Services Larger mobility domain for more simultaneous client associations. Faster RRM updates for uninterrupted network access when roaming. Intelligent RF control plane for self-configuration, selfhealing, and self-optimization. Efficient roaming improves application performance such as toll quality, voice, and consistent streaming video and data backup. Licensing Flexibility and Investment Protection Additional access point capacity licenses may be added over time. OfficeExtend Solution Secure, simple, cost-effective mobile teleworker solution. Up to 500 remote access points per controller. Supports Unified Communications wireless phones for reduced cell phone charges. Comprehensive Wired/Wireless Security Full CAPWAP access point to controller encryption. Supports rogue access point detection and denial-ofservice attacks. Management frame protection detects malicious users and alerts network administrators. Enterprise Wireless Mesh Dynamic wireless mesh networks support indoor and outdoor connectivity for areas that are difficult to wire. Environmentally Responsible Support for adaptive power management to turn off access point radios during off-peak hours to reduce power consumption. OfficeExtend solution reduces costs and supports green best practices by reducing commuting time and saving on gas, vehicle mileage, and insurance costs. The Cisco 5500 Series Wireless Controller is a highly scalable and flexible platform that enables system wide services for mission-critical wireless in medium to large-sized enterprises and campus environments. Designed for n performance and maximum scalability, the 5500 Series offers enhanced uptime with RF visibility and protection, the ability to simultaneously manage up to 500 access points; superior performance for reliable streaming video and toll quality voice; and improved fault recovery for a consistent mobility experience in the most demanding environments. Features Optimized for high performance wireless networking, the 5500 Series offers improved mobility and prepares the business for the next wave of mobile devices and applications. The 5500 Series supports a higher density of clients and delivers more efficient roaming, with at least nine times the throughput of existing a/g networks. The 5500 Series automates wireless configuration and management functions and allows network managers to have the visibility and control needed to cost-effectively manage, secure and optimize the performance of their wireless networks. With integrated CleanAir technology the 5500 Series protects n performance by providing cross-network access to real-time and historic RF interference information for quick, troubleshooting and resolution. As a component of the Cisco Unified Wireless Network, this controller provides realtime communication between Cisco Aironet access points, the Cisco Wireless Control System (WCS), and the Cisco Mobility Services Engine to deliver centralized security policies, wireless intrusion prevention system (IPS) capabilities, awardwinning RF management, and quality of service (QoS) Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8

95 Software Licensing Flexibility Base access point licensing offers flexibility to add up to 500 additional access points as business needs grow. The licensing structure supports a variety of business mobility needs as part of the basic feature set, including the OfficeExtend solution for secure, mobile teleworking and Enterprise Wireless Mesh, which allows access points to dynamically establish wireless connections in locations where it may be difficult or impossible to physically connect to the wired network. Table 1 lists the features of the Cisco 5500 Series Wireless LAN Controllers. Table 1. Feature Scalability Cisco 5500 Series Wireless LAN Controller Features Benefits Supports 12, 25, 50,100, 250 or 500 access points for business-critical wireless services at locations of all sizes. High Performance RF Management OfficeExtend Wire speed, non-blocking performance for n networks. Provides both real-time and historical information about RF interference impacting network performance across controllers, via system wide CleanAir integration. Supports corporate wireless service for mobile and remote workers with secure wired tunnels to the Cisco Aironet 1130 or 1140 Series Access Points. Extends the corporate network to remote locations with minimal set up and maintenance requirements (zerotouch deployment). Improves productivity and collaboration at remote site locations. Separate SSID tunnels allow both corporate and personal Internet access. Reduced CO2 emissions from decrease in commuting. Higher employee job satisfaction from ability to work at home. Improves business resiliency by providing continuous, secure connectivity in the event of disasters, pandemics, or inclement weather. Comprehensive End-to-End Security Enterprise Wireless Mesh High Performance Video End-to-end Voice High Availability Environmentally Responsible Offers Control and Provisioning of Wireless Access Points (CAPWAP) compliant DTLS encryption to ensure full-line-rate encryption between access points and controllers across remote WAN/LAN links. Allows access points to dynamically establish wireless connections without the need for a physical connection to the wired network. Available on select Cisco Aironet access points, Enterprise Wireless Mesh is ideal for warehouses, manufacturing floors, shopping centers and any other location where extending a wired connection may prove difficult or aesthetically unappealing. Integrates VideoStream technology as part of the Cisco Medianet freamework to optimize the delivery of video applications across the WLAN. Supports Unified Communications for improved collaboration through messaging, presence, and conferencing. Supports all Cisco Unified Communications Wireless IP Phones for cost-effective, real-time voice services. An optional redundant power supply helps to ensure maximum availability. Organizations may choose to turn off access point radios to reduce power consumption during off peak hours. Table 2 lists the product specifications for Cisco 5500 Series Wireless Controllers. Table 2. Item Product Specifications for Cisco 5500 Series Wireless Controllers Specifications Wireless IEEE a, b, g, d, WMM/802.11e, h, n Wired/Switching/Routing IEEE BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T. 1000BASE-SX, 1000-BASE- LH, IEEE 802.1Q Vtagging, and IEEE 802.1AX Link Aggregation Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8

96 Item Data Request For Comments (RFC) Specifications RFC 768 UDP RFC 791 IP RFC 2460 IPv6 (pass through Bridging mode only) RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 1122 Requirements for Internet Hosts RFC 1519 CIDR RFC 1542 BOOTP RFC 2131 DHCP RFC 5415 CAPWAP Protocol Specification RFC 5416 CAPWAP Binding for Security Standards WPA IEEE i (WPA2, RSN) RFC 1321 MD5 Message-Digest Algorithm RFC 1851 The ESP Triple DES Transform RFC 2104 HMAC: Keyed Hashing for Message Authentication RFC 2246 TLS Protocol Version 1.0 RFC 2401 Security Architecture for the Internet Protocol RFC 2403 HMAC-MD5-96 within ESP and AH RFC 2404 HMAC-SHA-1-96 within ESP and AH RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV RFC 2406 IPsec RFC 2407 Interpretation for ISAKMP RFC 2408 ISAKMP RFC 2409 IKE RFC 2451 ESP CBC-Mode Cipher Algorithms RFC 3280 Internet X.509 PKI Certificate and CRL Profile RFC 3602 The AES-CBC Cipher Algorithm and Its Use with IPsec RFC 3686 Using AES Counter Mode with IPsec ESP RFC 4347 Datagram Transport Layer Security RFC 4346 TLS Protocol Version 1.1 Encryption WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys) AES: CBC, CCM, CCMP DES: DES-CBC, 3DES SSL and TLS: RC4 128-bit and RSA and 2048-bit DTLS: AES-CBC IPSec: DES-CBC, 3DES, AES-CBC Authentication, Authorization, and Accounting (AAA) IEEE 802.1X RFC 2548 Microsoft Vendor-Specific RADIUS Attributes RFC 2716 PPP EAP-TLS RFC 2865 RADIUS Authentication RFC 2866 RADIUS Accounting RFC 2867 RADIUS Tunnel Accounting RFC 2869 RADIUS Extensions RFC 3576 Dynamic Authorization Extensions to RADIUS RFC 3579 RADIUS Support for EAP RFC 3580 IEEE 802.1X RADIUS Guidelines RFC 3748 Extensible Authentication Protocol Web-based authentication TACACS support for management users 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8

97 Item Management Specifications SNMP v1, v2c, v3 RFC 854 Telnet RFC 1155 Management Information for TCP/IP-Based Internets RFC 1156 MIB RFC 1157 SNMP RFC 1213 SNMP MIB II RFC 1350 TFTP RFC 1643 Ethernet MIB RFC 2030 SNTP RFC 2616 HTTP RFC 2665 Ethernet-Like Interface types MIB RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions RFC 2819 RMON MIB RFC 2863 Interfaces Group MIB RFC 3164 Syslog RFC 3414 User-Based Security Model (USM) for SNMPv3 RFC 3418 MIB for SNMP RFC 3636 Definitions of Managed Objects for IEEE MAUs Cisco private MIBs Management Interfaces Web-based: HTTP/HTTPS Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port Cisco Wireless Control System (WCS) Interfaces and Indicators Uplink: 8 (5508) 1000BaseT, 1000Base-SX and 1000Base-LH transceiver slots Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): GLC-T, GLC-SX-MM, GLC- LH-SM LED indicators: link Service Port: 10/100/1000 Mbps Ethernet (RJ45). Service Port: 10/100/1000 Mbps Ethernet (RJ45) For High Availability for future use LED indicators: link, Utility Port: 10/100/1000 Mbps Ethernet (RJ45) LED indicators: link Expansion Slots: 1 (5508) Console Port: RS232 (DB-9 male/rj-45 connector included), mini-usb Other Indicators: Sys, ACT, Power Supply 1, Power Supply 2 Physical and Environmental Dimensions (WxDxH): x x 1.75 in. (440 x 539 x 44.5 mm) Weight: 20 lbs (9.1 kg) with 2 power supplies Temperature: Operating temperature: 32 to 104 F (0 to 40 C); Storage temperature: -13 to 158 F (-25 to 70 C) Humidity: Operating humidity: 10 95%, noncondensing; Storage humidity: up to 95% Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115 W Maximum; A at 220 VAC, 115 W Maximum; Test Conditions: Redundant Power Supplies, 40C, Full Traffic. Heat Dissipation: 392 BTU/hour at 110/220 VAC Maximum Regulatory Compliance CE Mark Safety: UL :2003 EN 60950:2000 EMI and susceptibility (Class A): U.S.: FCC Part and Canada: ICES-003 Japan: VCCI Europe: EN 55022, EN Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8

98 Table 3 and Table 4 list the ordering and accessories information for Cisco 5500 Series Wireless Controllers. Table 3. Ordering Information for Cisco 5500 Series Wireless Controllers Part Number Product Name SMARTnet 8x5xNBD AIR-CT K Series Wireless Controller for up to 12 Cisco access points CON-SNT-CT0812 AIR-CT K Series Wireless Controller for up to 25 Cisco access points CON-SNT-CT0825 AIR-CT K Series Wireless Controller for up to 50 Cisco access points CON-SNT-CT0850 AIR-CT K Series Wireless Controller for up to 100 Cisco access points CON-SNT-CT08100 AIR-CT K Series Wireless Controller for up to 250 Cisco access points CON-SNT-CT08250 AIR-CT K Series Wireless Controller for up to 500 Cisco access points CON-SNT-CT08500 AIR-CT PK 2 Pack 5500 Series Wireless Controller for up to 500 Cisco access points each (1000 access points total) CON-SNT-AIRC552P Table 4. Part Number Accessories for Cisco 5500 Series Wireless Controllers Product Name AIR-PWR-5500-AC= AIR-FAN-5500= AIR-CT5500-RK-MNT 5500 Series Wireless Controller Redundant AC Power Supply 5500 Series Wireless Controller Fan Tray 5500 Series Wireless Controller Spare mounting kit Additive Capacity Upgrade Licenses The following additive capacity upgrade licenses are available for the Cisco 5500 Series: Table 5. Ordering Information for Cisco 5500 Series Wireless Controllers Additive Capacity Licenses (e-delivery PAK s) Part Number Product Description SMARTnet 8x5xNBD e-license L-LIC-CT5508-UPG Primary upgrade SKU: Pick any number or combination of the following options under this SKU to upgrade one or many controllers under one product authorization key CON-SNT-LCTUPG L-LIC-CT A 25 AP Adder License for the 5508 Controller (edelivery) CON-SNT-LCT25A L-LIC-CT A 50 AP Adder License for the 5508 Controller (edelivery) CON-SNT-LCT50A L-LIC-CT A 100 AP Adder License for the 5508 Controller (edelivery) CON-SNT-LCT100A L-LIC-CT A 250 AP Adder License for the 5508 Controller (edelivery) CON-SNT-LCT250A Table 6. Ordering Information for Cisco 5500 Series Wireless Controllers Additive Capacity Licenses (Paper PAK s) Part Number Product Description SMARTnet 8x5xNBD Paper License LIC-CT5508-UPG Primary upgrade SKU: Pick any number or combination of the following options under this SKU, to upgrade one or many controllers under one product authorization key. CON-SNT-LCTUPG LIC-CT A 25 AP Adder License for the 5508 Controller CON-SNT-LCT25A LIC-CT A 50 AP Adder License for the 5508 Controller CON-SNT-LCT50A LIC-CT A 100 AP Adder License for the 5508 Controller CON-SNT-LCT100A LIC-CT A 250 AP Adder License for the 5508 Controller CON-SNT-LCT250A The additive capacity licenses allow for the increase in access point capacity supported by the controller upto a maximum of 500 Access points. As an example, if a controller was initially ordered with the 250 access point support, that capacity could be later increased to upto 500 access points by purchasing a 250 access point additive capacity license (1x-LIC-CT A) Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 8

99 A certificate with a PAK is required to add additional access point capacity on the Cisco 5500 Series Wireless Controller. The certificate may be expedited via . If a paper certificate is required for customs, it should be ordered to ship via U.S. mail. Each additive capacity license and PAK must be registered prior to installation. Ordering and installing the Cisco 5500 Series Wireless Controller additive capacity licenses is a three-step process: 1. Select the correct SKU for or paper delivery. 2. Register the PAK certificate. (See Registering PAK Certificate). 3. Install the license on the Cisco 5508 Series Wireless Controller. (See Installing License). Please review the Cisco Wireless LAN Controller Configuration Guide, Release 6.0, for detailed ordering, registration and installation information for the 5500 Series additive capacity licenses. Electronic delivery of the same PAK s is available by ordering the e-license SKUs as listed in Table 4. If a paper certificate is required, please use the SKUs listed in Table 5. PAK Certificate Registration Customers are required to register a PAK certificate for all upgrade licenses for the Cisco 5500 Series Wireless Controllers. Customer address and host name are required to register the PAK certificate at Installing License on Cisco WCS Server Follow these steps to install a license file. If you need additional help, contact Cisco Technical Assistance Center (TAC) at or tac@cisco.com. 1. Install Cisco WCS software if not already completed. 2. Save the license file (.lic) to a temporary directory on your hard drive. (You will receive an from Cisco with an attached license file). 3. Open a supported version of the Internet Explorer browser. 4. In the location or address field, enter the following URL, replacing IP address with the IP address or host name of the Cisco WCS server: https: // <IP address>. 5. Log in to the Cisco WCS server as system administrator. (Be aware that usernames and passwords are casesensitive.). 6. From the Help menu select Licensing. 7. On the Licensing page, from the command menu select Add License 8. On the Add License page, click Browse to navigate to the location where you saved the.lic file. 9. Click Download. The Cisco WCS server imports the license. Table 7 shows the optional paper PAK license for Cisco 5500 Series Wireless Controllers. DTLS license is designated for customers who purchase a controller with DTLS disabled due to import restrictions but get permission to add DTLS support after initial purchase. This optional DTLS license is required for OfficeExtend deployment Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8

100 Table 7. Part Number Optional Licensing for Cisco 5500 Series Wireless Controllers (Paper PAKs) Description LIC-CT5508-LPE-K9 Cisco 5508 Controller DTLS License (Paper Certificate - US Mail) Service and Support Cisco Wireless LAN Services Cisco and our specialized partners offer a broad portfolio of end-to-end services to help you improve your organization s productivity and collaboration by assisting with the readiness, deployment and optimization of your wireless network and mobility services. Our services help you successfully deploy the 5500 Series Wireless Controller and integrate mobility solutions effectively to lower the total cost of ownership and secure your wireless network. To learn more about Cisco Wireless LAN Service offers, please visit Cisco WLAN Advanced Services Consulting is available for the planning and deployment stages to help ensure the successful integration of the Cisco 5500 Series Wireless Controller in your network. Cisco WLAN Advanced Services Consulting can be ordered with the SKU listed in Table 6. Please contact your Cisco Sales representative with the information required for a pricing quote: Number of sites Desired coverage area (square feet or square miles) Estimated number of access points per site Advanced Mobility Services and required applications Table 8. Part Number Ordering Information for planning and deployment consulting services for the Cisco 5500 Series Wireless Controllers Service Name AS-WLAN-CNSLT Cisco WLAN Advanced Services Consulting Summary The Cisco 5500 Series Wireless Controller is designed for n performance and offers maximum scalability for enterprise and service provider wireless deployments. It simplifies deployment and operation of wireless networks, helping to ensure smooth performance, enhance security, and maximize network availability. The Cisco 5500 Series Wireless Controller manages all of the Cisco access points within campus environments and branch locations, eliminating complexity and providing network administrators with visibility and control of their wireless LANs. For More Information For more information about Cisco wireless controllers, contact your local account representative or visit For more information about the Cisco Unified Wireless Network framework, visit Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 8

101 Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8

102 Dell PowerEdge R320 An enterprise-class, 1-socket server, the Intel-powered Dell PowerEdge R320 has the right computing power, scalability and value in a dense chassis. The Dell PowerEdge R320 is an enterprise-class, 1-socket, 1U rack-mount server designed to deliver the right combination of performance, redundancy and value in a dense chassis. This rack server caters to the growing need for virtualization by offering scalable processor performance, a large memory footprint and the capacity for up to eight hard drives. The performance per cost, along with configuration flexibility, storage connectivity and straightforward systems management make the R320 highly appealing to hosting providers. Consistent worldwide support makes the R320 highly appealing to multinational businesses and organizations. Enterprise features, scalable expandability and value in a dense chassis The R320 features the scalable performance of the Intel Xeon E processors with essential Intel memory RAS features. This server complements its processors with six DIMMs and two PCI Express (PCIe) slots, providing a substantial memory footprint and wide I/O bandwidth to support both memory-sensitive applications and databases. These combined technology features enable the R320 to support consolidated and virtualized environments. To protect your virtualized workloads, the R320 offers dual SD cards making your hypervisors redundant and failsafe. Other reliability and availability features include up to four 3.5-inch or eight 2.5-inch hot-plug hard drives, both hardware and software RAID options and redundant, hot-plug power supplies. Ideal for your applications The R320 is an excellent fit for web, file and print serving as well as smaller scale hosting and e-commerce, retail server, workgroup server and smaller scale virtualization in space-constrained, small-medium business locations and departmental and remote sites of large businesses and public organizations. Enterprise-class network options As a 1-socket rack server, the R320 has very aggressive advanced network options, carrying multiple third-party brands and adapter types with 10GbE NIC, 10GbE FCoE and Fiber Channel 8Gb HBA. The PowerEdge server line The PowerEdge family is engineered with the right combination of features and performance scalability to handle tough workloads for both large and small data center environments. The Dell OpenManage systems management portfolio includes integrated Dell Remote Access Controller (idrac) with Lifecycle Controller. This embedded feature helps IT administrators manage Dell servers in physical, virtual, local and remote environments, operating in-band or out-of-band, with or without a systems management software agent. OpenManage integrates and connects to third-party systems management solutions so you can maintain your single point of control and capitalize on your existing investment. OpenManage simplifies the lifecycle of deploying, updating, monitoring, and maintaining your Dell PowerEdge servers. PowerEdge R320 Enterprise computing with Intel Xeon processors E Up to eight 2.5-inch drive capacity Up to six DIMMs with RAS PCIe 3.0-enabled expansion slots Enterprise redundancy and scalable expandability December 2012

103 Feature Form factor Processors Processor sockets 1 PowerEdge R320 technical specification 1U rack Internal interconnect Intel DMI 2.0 Intel Xeon processor E product family Intel Xeon processor E Intel Pentium processor 1400 product family Cache 2.5MB per core; core options: 2, 4, 6, 8 Chipset Memory 1 I/O slots RAID controller Drive bays Maximum internal storage 1 Hard drives Embedded NIC I/O adapter options Power Intel C600 series Up to 192GB (6 DIMM slots): 2GB/4GB/8GB/16GB/32GB DDR3 up to 1600MT/s 2 PCIe slots: One x8 PCIe slot with x4 bandwidth, 2.0, half-length, half-height One x16 PCIe slot with x16 bandwidth, 3.0, half-length, full-height Internal controllers: PERC S110 (SW RAID) PERC H310 PERC H710 Up to eight 2.5 hot-plug SAS, SATA or SSD or four 3.5 SAS, SATA Up to 16TB Hot-plug hard drive options: 2.5 SATA, nearline SAS, SAS (15K, 10K), SAS SSD, SATA SSD 3.5 SATA, nearline SAS, SAS (15K) Cabled hard drive options: 3.5 SATA, nearline SAS, SAS (15K) Self-encrypting drives available Broadcom 5720 Dual Port 1Gb LOM 1Gb Ethernet: Broadcom 5720 Dual Port 1Gb NIC Broadcom 5720 Quad Port 1Gb NIC Intel I350 Dual Port 1Gb stand-up adapter Intel I350 Quad Port 1Gb stand-up adapter 10Gb Converged Ethernet: Brocade BR1020 Dual Port 10Gb CNA QLogic QLE8262 Dual Port 10Gb DA/SFP+ Broadcom 57810S Dual Port 10Gb Base-T CNA Broadcom 57810S Dual Port 10Gb DA/SFP+ CNA External HBAs (RAID): PERC H810 External HBAs (non-raid): 6Gbps SAS HBA 10Gb Ethernet: Intel X520 Dual Port 10Gb DA/SFP+ server adapter Intel X540 Dual Port 10Gb Base-T adapter FC8/FC4 HBA: QLogic QLE2460 4Gb Single Port FC HBA QLogic QLE2462 4Gb Dual Port FC HBA QLogic QLE2560 8Gb Single Port FC HBA QLogic QLE2562 8Gb Dual Port FC HBA Emulex LPe E 8Gb Single Port FC HBA Emulex LPe E 8Gb Dual Port FC HBA Brocade 815 8Gb Single Port FC HBA Brocade 825 8Gb Dual Port FC HBA Platinum efficiency, hot-plug, redundant 350W and 550W power supplies; Bronze efficiency, cabled 350W power supply Auto-ranging power supplies Availability Remote management Systems management Rack support High-efficiency, hot-plug, redundant power supplies; hot-plug hard drives; TPM; dual internal SD support; fan fault tolerance; optional bezel; information tag; ECC memory, interactive LCD screen; ENERGY STAR compliant Basic management (default), idrac7 with Lifecycle Controller, idrac7 Express (upgrade option), idrac7 Enterprise (upgrade option), 8GB or 16GB vflash media (upgrade options) IPMI 2.0 compliant Dell OpenManage Essentials and Dell Management Console Dell OpenManage Power Center Dell OpenManage Connections: OpenManage Integration Suite for Microsoft System Center Dell plug-in for VMware vcenter HP Operations Manager, IBM Tivoli Netcool, and CA Network and Systems Management ReadyRails TM II sliding rails for toolless mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm ReadyRails static rails for toolless mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded and 2-post (Telco) racks Operating systems Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualizations options: Citrix XenServer VMware vsphere ESX and ESXi Red Hat Enterprise Virtualization For more information on the specific versions and additions, visit Dell.com/OSsupport. 1 GB means 1 billion bytes and TB equals 1 trillion bytes; actual capacity varies with preloaded material and operating environment and will be less. OEM-ready version available From bezel to BIOS to packaging, your servers can look and feel as if they were designed and built by you. For more information, visit Dell.com/OEM. Learn more at Dell.com/PowerEdge 2012 Dell Inc. All rights reserved. Dell, the DELL logo, the DELL badge, PowerEdge, and OpenManage are trademarks of Dell Inc. Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows, Windows Server, and Hyper-V are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of others. This document is for informational purposes only. Dell reserves the right to make changes without further notice to any products herein. The content provided is as is and without express or implied warranties of any kind.

104 Licensing and Ordering Guide. Cisco WCS Licensing and Ordering Guide This Cisco Wireless Control System (WCS) licensing and ordering guide presents ordering guidelines and licensing information for new and existing Cisco WCS deployments that are being upgraded to support Cisco WCS Software Release 5.2 or later. This guide includes information on buying new or expansion Cisco WCS licenses to deploy on single or multiple servers (enterprise), adding new Cisco WCS enterprise licenses, converting from CiscoWorks Wireless LAN Solution Engine (WLSE) to Cisco WCS, upgrading to the Cisco WCS Location and High Availability option, and deploying the free Cisco WCS Demonstration License. Overview Cisco WCS is the industry-leading platform for wireless LAN planning, configuration, and management, and is the management platform for the Cisco Unified Wireless Network. With Cisco WCS, network administrators have a single solution for RF prediction, policy provisioning, network optimization, troubleshooting, reporting, asset tracking, location-based services, security monitoring, and wireless LAN systems management. Cisco WCS supports Cisco Aironet lightweight access points, Cisco wireless LAN controllers, and the Cisco 3300 Series Mobility Services Engine. Multiple Cisco WCS management platforms can be managed by Cisco WCS Navigator. Refer to the WCS Navigator Licensing and Order Guide at Cisco WCS licensing entitlement is applicable for new or expanded Cisco WCS deployments on single or multiple servers (enterprise), CiscoWorks WLSE customers upgrading to Cisco WCS, Cisco WCS PLUS upgrades, and existing Cisco WCS installations that are upgrading to Cisco WCS Software Release 5.2 or later. Cisco WCS demonstration licenses are also available. Note: A complete listing of all Cisco WCS licenses is presented in Table 1. Ordering and Installing Cisco WCS Licenses Ordering and installing Cisco WCS licenses is a five-step process: 1. Select the correct Cisco WCS SKU. (See Selecting Cisco WCS SKU and Figure 1 Cisco WCS Licensing Structure) 2. Order the Cisco WCS SKU. (See Ordering). 3. Install Cisco WCS software after download. (See Installing Software). 4. Register Product Authorization Key Certificate. (See Registering PAK Certificate). 5. Install license file on Cisco WCS server(s). (See Installing License). Note: For Cisco demonstration license order and install steps, proceed to the Installing Cisco WCS Demonstration License section Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 13

105 Licensing and Ordering Guide Figure 1. Cisco WCS Licensing Structure Step 1: Selecting Cisco WCS SKU Cisco WCS is available in either a Cisco WCS Base or Cisco WCS PLUS configuration. Cisco WCS Base supports standard Cisco WCS capabilities. Cisco WCS PLUS includes all WCS Base features plus the ability to track location of a single Wi-Fi device such as a client, tag, or rogue access point on demand (limited location), N:1 High Availability (HA) for WCS servers, and Cisco 3300 Series Mobility Services Engine (MSE) management which can expand location capabilities by adding Cisco Context-Aware Software to simultaneously track up to 18,000 assets. Note: Customers who deploy HA for their WCS servers must have WCS 5.2 or later installed on their primary and secondary servers. Additionally, customers must install a WCS STANDARD-K9 (PLUS configuration) or WCS-ENT- PLUS-K9 license on each of the primary servers that are backed up by the secondary server. (Primary server provides the license for the secondary server. No separate license is required for the secondary server). Note: Cisco WCS PLUS license products introduced in release 5.2 are backward compatible with existing Cisco WCS Location and Enterprise licenses. Customers can expand location capabilities beyond a single Wi-Fi device by adding a Cisco 3300 Series Mobility Services Engine to simultaneously track up to Wi-Fi devices Refer to the Cisco 3300 Series Mobility Services Engine Licensing and Ordering Guide Cisco WCS is licensed as either a single server or enterprise deployment. Single Server License Overview Licenses: WCS-STANDARD-K9, WCS-PLUS-UPG-K9, and WCS-WLSE-UPG-K9 License increments: 50, 100, 500 (Up to 1500 for WLSE-to-WCS conversion only) Single server deployment 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 13

106 Licensing and Ordering Guide Suitable for customers deploying up to 500 (Up to 1500 for WLSE-to-WCS conversion) Cisco Aironet lightweight access points One license file per Product Authorization Key (PAK) certificate Available in WCS Base and WCS PLUS configurations Enterprise Server License (Multiple Servers) Overview (release 4.1 or later) License: WCS-ENT-PLUS-K9 License increments: 1000, 2500, 10000, Single or multiple server deployment (Cisco WCS Navigator included in 10000, and licenses) Suitable for customers deploying 500 or more Cisco Aironet lightweight access points Multiple license files linked to a single PAK certificate Server decrements available number of access points as licenses are allocated within the network Ordering and Deployment Guidelines for Licenses Please review the license ordering considerations listed below. CISCO WCS BASE AND CISCO WCS PLUS LICENSES Cisco WCS Base and Cisco WCS PLUS (single server and enterprise) licenses cannot be combined. For single server deployments, it is more cost effective to purchase Cisco WCS PLUS initially rather than to upgrade from a Cisco WCS Base to a Cisco WCS PLUS license at a later date. All Cisco WCS licenses of the same option (Base or PLUS) are additive. Cisco WCS licenses can be combined to support an incremental number of access points (such as 300, 700, 900) beyond the distinct license increments (such as 50, 100, 500) offered. Example 1: To purchase a new single server license for 800 access points Purchase: WCS-STANDARD-K9, (1) WCS-APBASE-500, and (3) WCS-APBASE-100 Example 2: To purchase a new enterprise license for 20,000 access points: Purchase: WCS-ENT-PLUS-K9, and (2) WCS-ENT-PLUS SINGLE SERVER AND ENTERPRISE LICENSES Single server and Enterprise licenses can co-exist on a Cisco WCS server if the single server license is Cisco WCS PLUS. If a Cisco WCS Base license was ordered initially, it must be upgraded to a Cisco WCS PLUS license before the enterprise license can be added to the single server license. Example: A customer has an existing Cisco WCS Base license for 500 access points (WCS-APBASE-500). The customer wants to add an additional quantity of 800 access points on multiple Cisco WCS servers for a total of 1300 access points. Purchase: (1) WCS-PLUS-UPG-500 to upgrade the existing 500 Cisco WCS Base license to a Cisco WCS PLUS license, and (1) WCS-ENT-1000 to support the new 800 access points. Once allocated to a server, enterprise licenses cannot be broken down into smaller increments. For example, if a license of 1000 is allocated in increments of 250 within the network, you cannot break down the 250 allocation further. CISCO WCS SKUS All Cisco WCS SKUs can be bought as a discrete SKU (first-time purchase) or as an expansion SKU (added to an existing deployment) unless otherwise noted. All Cisco WCS SKUs, except for the Cisco WCS Demonstration License, are orderable using the Cisco Ordering Tool Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 13

107 Licensing and Ordering Guide Each license is orderable in specified quantity blocks. To add multiple quantities of license blocks, you must go back to the main screen and order additional family SKUs and then select the sub-sku option and quantity block required. Repeat this process until the correct quantity of licenses is ordered. Cisco WCS licensing is not tied to the type of lightweight access point deployed since Cisco WCS licensing does not distinguish among access point types. Each lightweight access point is counted as one access point license. Software SKUs Review the six links below to identify your license requirements as either a NEW or EXISTING customer and to identify the appropriate Cisco WCS Base or Cisco WCS PLUS SKU to order. Click the link to go to that section. Standalone Software Upgrade to Cisco WCS 5.2 Cisco WCS Base Options for NEW and EXISTING Customers (WCS-STANDARD-K9) CISCO WLSE-to-Cisco WCS Base CONVERSION for EXISTING customers (WCS-WLSE-UPG-K9) Cisco Base-to-Cisco PLUS Upgrade for EXISTING customers (WCS-PLUS-UPG-K9) Cisco WCS PLUS Options for NEW Customers (WCS-STANDARD-K9, WCS-ENT-PLUS-K9) Cisco WCS PLUS Options for EXISTING Customers (WCS-STANDARD-K9, WCS-ENT-PLUS-K9, WCS-WLSE- UPG-K9) View a complete listing of all Cisco WCS licenses in Table 1. Standalone Software Upgrade to Cisco WCS 5.2 or Later If you are an EXISTING Cisco WCS 5.1 customer who wants to upgrade to Cisco WCS 5.2 or later, have a valid SAS/SAU, and are not ordering any licenses, proceed to Log in required. CISCO WCS BASE OPTIONS FOR NEW AND EXISTING CUSTOMERS (WCS-STANDARD-K9) If you are a NEW Cisco WCS customer who wants support for 50, 100, or 500 access points in a single server deployment, order WCS-STANDARD-K9 and select one of the Cisco Base options below: WCS-APBASE-50: License supports up to 50 access points. WCS-APBASE-100: License supports up to 100 access points. WCS-APBASE-500: License supports up to 500 access points. Note: If your access point deployment does not exactly match 50, 100 or 500, you need to order multiple licenses. For example, to support an access point deployment of 250 you would order (2) WCS-APBASE-100 licenses + (1) WCS-APBASE-50 license. This ordering process applies to both new and upgrade orders. If you are an EXISTING Cisco WCS customer who wants to increase access points support within a single server deployment, order WCS-STANDARD-K9 and select one of the Cisco Base options below: WCS-APBASE-50: License supports up to 50 access points. WCS-APBASE-100: License supports up to 100 access points. WCS-APBASE-500: License supports up to 500 access points Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 13

108 Licensing and Ordering Guide Note: If your increased access point deployment does not exactly match 50, 100 or 500, you need to order multiple licenses. For example, to support an access point deployment of 250 (and you already have a WCS- BASE-100 license) you would order (1) WCS-APBASE-100 license + (1) WCS-APBASE-50 license. Note: These are the same licenses ordered by new customers. Licenses are additive and ordered in increments whether ordered for a new or existing deployment. CISCO WLSE-TO-WCS BASE CONVERSION CUSTOMERS (WCS-WLSE-UPG-K9) If you are a CiscoWorks WLSE (models , 1133) customer who wants to convert to Cisco WCS Base, and wants support for 50, 100, 500 or 1000 access points in a single server deployment, order WCS- WLSE-UPG-K9 and select one of the Cisco Base options below: WCS-WLSE-APB-50: License supports up to 50 access points. WCS-WLSE-APB-100: License supports up to 100 access points. WCS-WLSE-APB-500: License supports up to 500 access points. WCS-WLSE-APB-1000: License supports up to 1000 access points. Note: CiscoWorks WLSE Express model 1030, and CiscoWorks WLSE model 1105 are not supported by this SKU. These WLSE models cannot be converted to Cisco WCS. Note: WLSE licenses are tied to WLSE hardware and cannot be used on non-wlse hardware. CISCO BASE-TO-CISCO PLUS UPGRADE FOR EXISTING CUSTOMERS (WCS-PLUS-UPG-K9) If you are an EXISTING customer who wants to upgrade from a Cisco Base to Cisco PLUS license, order WCS-PLUS-UPG-K9 and select one of the Cisco WCS PLUS upgrade options below: WCS-PLUS-UPG-50: License supports up to 50 access points. WCS-PLUS-UPG-100: License supports up to 100 access points. WCS-PLUS-UPG-500: License supports up to 500 access points. Note: The number of WCS-PLUS-UPG-K9 licenses purchased must equal or exceed the number of installed WCS Base licenses for the Cisco WCS to register as a Cisco WCS PLUS system. Thereafter, additional capacity is added by ordering PLUS licenses. CISCO WCS PLUS OPTIONS FOR NEW CUSTOMERS (WCS-STANDARD-K9, WCS-ENT-PLUS-K9) If you are a NEW Cisco WCS customer with a single server deployment and want location tracking, high availability, and support for 50, 100, or 500 access points, order WCS-STANDARD-K9 and select one of the Cisco WCS PLUS options below: WCS-PLUS-50: License supports up to 50 access points. WCS-PLUS-100: License supports up to 100 access points. WCS-PLUS-500: License supports up to 500 access points. If you are a NEW Cisco WCS customer with an enterprise deployment and want single device Location tracking, High Availability, and support for 1000, 2500, 10000, or access points, order WCS-ENT- PLUS-K9 and one of the Cisco WCS PLUS options below: WCS-ENT-PLUS-1000: License supports up to 1000 access points. WCS-ENT-PLUS-2500: License supports up to 2500 access points. WCS-ENT-PLUS-10000: License supports up to access points. WCS-ENT-PLUS-50000: License supports up to access points Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 13

109 Licensing and Ordering Guide CISCO WCS PLUS OPTIONS FOR EXISTING CUSTOMERS (WCS-STANDARD-K9, WCS-ENT-PLUS-K9, WCS- WLSE-UPG-K9) If you are an EXISTING Cisco WCS PLUS customer with a single server deployment and want to increase the number of access points supported in your network, order WCS-STANDARD-K9 and one of the Cisco WCS PLUS options below: WCS-PLUS-50: License supports up to 50 access points. WCS-PLUS-100: License supports up to 100 access points. WCS-PLUS-500: License supports up to 500 access points. Note: These are the same licenses ordered by new customers. Licenses are additive and ordered in increments whether ordered for a new or existing deployment. If you are an EXISTING Cisco WCS PLUS customer with an enterprise deployment who wants to increase access points support within a multiple server deployment, order WCS-ENT-PLUS-K9 and select one of the Cisco PLUS options below: WCS-ENT-PLUS-1000: License supports up to 1000 access points. WCS-ENT-PLUS-2500: License supports up to 2500 access points. WCS-ENT-PLUS-10000: License supports up to access points. WCS-ENT-PLUS-50000: License supports up to access points. Note: These are the same licenses ordered by new customers. Licenses are additive and ordered in increments whether ordered for a new or existing deployment. If you are an EXISTING CiscoWorks WLSE (models , 1133) customer and want to CONVERT to Cisco WCS PLUS, and want support for 50, 100, 500 or up to master page1500 access points, order WCS- WLSE-UPG-K9 and select one of the Cisco PLUS options below: WCS-WLSE-PLUS-50: License supports up to 50 access points. WCS-WLSE-PLUS-100: License supports up to 100 access points. WCS-WLSE-PLUS-500: License supports up to 500 access points. WCS-WLSE-PLUS-1000: License supports up to 1000 access points. Note: CiscoWorks WLSE Express model 1030 and CiscoWorks WLSE model 1105 are not supported by this SKU. These WLSE models cannot be converted to Cisco WCS. Note: WLSE licenses are tied to WLSE hardware and cannot be used on non-wlse hardware. COMPLETE LISTING OF CISCO WCS LICENSES Table 1 provides a complete listing of all Cisco WCS license SKUs. Table 1. Currently Available Cisco WCS Licenses Product Part Number Product Description WCS-STANDARD-K9 New and Expanded Cisco WCS Deployments Cisco WCS Base Supports deployment of Cisco WCS on a single server WCS-APBASE-50 WCS-APBASE-100 WCS-APBASE-500 Cisco WCS Base license for 50 access points, Windows/Linux Cisco WCS Base license for 100 access points, Windows/Linux Cisco WCS Base license for 500 access points, Windows/Linux 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 13

110 Licensing and Ordering Guide Product Part Number Product Description Cisco WCS Plus Supports deployment of Cisco WCS on a single server Supports mobility services enablement, high availability, and the ability to track the location of a single Wi-Fi device or tag on demand Backward-compatible with existing Cisco WCS location and enterprise licenses WCS-PLUS-50 WCS-PLUS-100 WCS-PLUS-500 Cisco WCS Plus license for mobility services enablement and high availability for 50 access points, Windows/Linux Cisco WCS Plus license for mobility services enablement and high availability for 100 access points, Windows/Linux Cisco WCS Plus license for mobility services enablement and high availability for 500 access points, Windows/Linux WCS-PLUS-UPG-K9 Upgrading Cisco WCS Base to Cisco WCS Plus Cisco WCS Plus Upgrade Supports deployment of Cisco WCS on a single server Supports upgrading a Cisco WCS base license to support mobility services enablement, high availability, and location services for one device or tag on demand WCS-PLUS-UPG-50 WCS-PLUS-UPG-100 WCS-PLUS-UPG-500 Cisco WCS Plus Upgrade license with mobility services enablement and high availability supporting 50 access points, Windows/Linux Cisco WCS Plus Upgrade license with mobility services enablement and high availability supporting 100 access points, Windows/Linux Cisco WCS Plus Upgrade license with mobility services enablement and high availability supporting 500 access points, Windows/Linux WCS-ENT-PLUS-K9 Enterprise Plus Licenses for Large-Scale Deployments Cisco Enterprise Plus Licenses Supports deployment of Cisco WCS on a single or multiple servers Supports mobility services enablement, high availability and the ability to track the location of a single Wi-Fi device or tag on demand Enterprises Plus licenses of 10,000 and 50,000 include a Cisco WCS Navigator (WCS-NAV-20) license These licenses are operational with Cisco Unified Wireless Network Software Release 4.1 and later. WCS-ENT-PLUS-1000 WCS-ENT-PLUS-2500 WCS-ENT-PLUS WCS-ENT-PLUS Cisco WCS Enterprise Plus license with mobility services enablement and high availability for 1000 access points, Windows/Linux on multiple Cisco WCS servers Cisco WCS Enterprise Plus license with mobility services enablement and high availability for 2500 access points, Windows/Linux on multiple Cisco WCS servers Cisco WCS Enterprise Plus license with mobility services enablement and high availability for 10,000 access points, Windows/Linux on multiple Cisco WCS servers. Includes WCS-NAV-20 license Cisco WCS Enterprise Plus license with mobility services enablement and high availability for 50,000 access points, Windows/Linux on multiple Cisco WCS servers. Includes WCS-NAV-20 license WCS-WLSE-UPG-K9 Converting an existing CiscoWorks WLSE to Cisco WCS CiscoWorks WLSE Conversion to Cisco WCS Base Supports deployment of Cisco WCS on a single server Available for CiscoWorks WLSE Models and 1133 only WCS-WLSE-APB-50 WCS-WLSE-APB-100 WCS-WLSE-APB-500 WCS-WLSE-APB-1000 Cisco WCS Base license for WLSE conversion supporting 50 access points, Linux Cisco WCS Base license for WLSE conversion supporting 100 access points, Linux Cisco WCS Base license for WLSE conversion supporting 500 access points, Linux Cisco WCS Base license for WLSE conversion supporting 1000 access points, Linux CiscoWorks WLSE Conversion to Cisco WCS Plus Supports deployment of Cisco WCS on a single server Available for CiscoWorks WLSE Models and 1133 only Supports mobility services enablement, high availability, and the ability to track the location of a single Wi-Fi device or tag on demand WCS-WLSE-PLUS-50 Cisco WCS Plus license with mobility services enablement and high availability for WLSE conversion supporting 50 access points, Linux WCS-WLSE-PLUS-100 Cisco WCS Plus license with mobility services enablement and high availability for WLSE conversion supporting 100 access points, Linux WCS-WLSE-PLUS-500 Cisco WCS Plus license with mobility services enablement and high availability for WLSE conversion supporting 500 access points, Linux WCS-WLSE-PLUS-1000 Cisco WCS Plus license with mobility services enablement and high availability for WLSE conversion supporting 1000 access points, Linux 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 13

111 Licensing and Ordering Guide Product Part Number Product Description AIR-WCS-DEMO-K9 Cisco WCS Demonstration License Step 1. Request the license from Step 2. Go to Cisco Wireless Software Center (login required) to download Cisco WCS software. Step 3. Install the Cisco WCS software on the customer-supplied server and enter the Cisco WCS demonstration license information when prompted There is no Cisco Technical Assistance Center (TAC) support for the Cisco WCS demonstration license. AIR-WCS-DEMO-K9 Free Cisco WCS full featured, location-enabled, 30 day demonstration license supporting 10 Cisco Aironet lightweight access points Step 2: Ordering All purchasable Cisco WCS licenses can be ordered from the Cisco Ordering Tool. To request help with ordering, please contact Cisco Customer Service PLEASE FOLLOW THE STEPS BELOW TO PLACE YOUR ORDER. 1. Login to the Cisco Ordering Tool. 2. Enter the family SKU: WCS-STANDARD-K9 or WCS-ENT-PLUS-K9 or WCS-PLUS-UPG-K9 or WCS-WLSE- UPG-K9 into the Enter Product field. Press Enter. The Select Options window appears (Figure 2). Figure 2. Select Options Window 3. Click Software License Option (left panel). The subordinate license options display (right panel). 4. Click the circle next to license quantity (such as WCS-ENT-PLUS-2500) that you want to order. 5. Click Check Configuration. A summary of your order appears (Figure 3) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 13

112 Licensing and Ordering Guide Figure 3. Check Configuration Window 6. Click Save to save the configuration. Note: For the WCS-STANDARD-K9 and WCS-PLUS-UPG-K9 SKU families, customers are prompted to order an optional CD (WCS-CD-K9) for a nominal charge during the ordering process. The WCS-CD-K9 contains one software image of Cisco WCS software on a CD for Windows and Linux. This CD is shipped by U.S. mail to the purchaser s address. The optional CD is not available for WCS-WLSE-UPG-K9 because this SKU family automatically ships in CD format. Note: You can only order one license quantity at a time (such as WCS-ENT-PLUS-2500). If you need to order multiple licenses to meet your access point support requirements, you must go back to the main screen and reorder both the family SKU and subordinate SKU. Repeat this process as needed, until the correct quantity of licenses is ordered. 7. To return to the Main Screen to order additional license SKUs click New Configuration. 8. Repeat steps 2 through 7 until you order your license quantity needs. Step 3: Installing Software You can download software during the ordering process. PLEASE FOLLOW THESES STEPS TO DOWNLOAD AND INSTALL SOFTWARE 1. Go to and log in. 2. Click on the appropriate link in the table (see Figure 4) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 13

113 Licensing and Ordering Guide Figure 4. Select release from software download window 3. Download software. 4. Install the Cisco WCS software on your server(s). PLEASE FOLLOW THESES STEPS TO INSTALL SOFTWARE FROM A CD 1. If it is a WLSE-to-WCS conversion, do the conversion before installing Cisco WCS software. 2. Install the Cisco WCS software on your server. Step 4: Registering PAK Certificate All purchased Cisco WCS SKUs require a PAK certificate to register the Cisco WCS license. All customers who ordered new licenses and those upgrading from release 3.x will receive a PAK certificate either by US mail or by . US mailed PAK: New or existing customers that are purchasing new Cisco WCS licenses from the Cisco Ordering Tool will receive their PAK as a paper certificate through the US mail. Cisco sends the PAK upon purchase of the Cisco WCS SKUs. ed PAK: Existing Cisco WCS customers who are upgrading from Cisco WCS Software Release 3.x to Cisco WCS software release 4.x or greater will receive their PAK certificate by from the alias wcs-customerlicense@cisco.com. PLEASE FOLLOW THESES STEPS TO REGISTER PAK CERTIFICATE 1. Login and go to the licensing site at 2. Follow the instructions on the web site to register the licenses using the PAK certificate. Customer address and host name are required to register. Additionally, if it is a single server license, confirm SKU ordered (WCS Base or WCS PLUS); and if it is an enterprise license, specify the number of access points to be decremented. Note: For Cisco WCS demonstration licenses, PAK certificate registration is automatically completed during the Cisco WCS demonstration license registration when the customer enters the host name of their server. 3. Look for an from licensing@cisco.com with the license file Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 13

114 Licensing and Ordering Guide If you do not receive an within an hour of registering your PAK, check your junk folder. If you cannot locate the , please contact Cisco TAC at (800) or Step 5: Installing License on Cisco WCS Server If you need help installing your license file please contact Cisco TAC at (800) or PLEASE FOLLOW THESE STEPS TO INSTALL LICENSE FILE 1. Install Cisco WCS software if not already completed. 2. Save the license file (.lic) to a temporary directory on your hard drive. (You will receive an from Cisco with an attached license file). 3. Open a supported version of the Internet Explorer browser. 4. In the location or address field, enter the following URL, replacing IP address with the IP address or host name of the Cisco WCS server: https: // <IP address>. 5. Log in to the Cisco WCS server as system administrator. (Be aware that usernames and passwords are casesensitive.). 6. From the Help menu select Licensing. 7. On the Licensing page, from the command menu select Add License On the Add License page, click Browse to navigate to the location where you saved the.lic file. 9. Click Download. The Cisco WCS server imports the license. Installing Cisco WCS Demonstration License You can experience Cisco WCS, the industry s leading platform for wireless LAN planning, configuration, management, and mobility services, for free for 30 days by downloading the new full-featured, location-enabled Cisco WCS Demonstration License (WCS-DEMO-K9). The demonstration license is only available by download. This license supports 10 access points for up to 30 days on a single server. Network configurations and set up for the demonstration license are retained to make it easier to transition to a licensed Cisco WCS copy. The Cisco WCS demonstration license 30 day period begins on the day the license is downloaded. Cisco TAC support is not available for the Cisco WCS Demonstration License. PLEASE FOLLOW THESE STEPS TO REQUEST AND INSTALL WCS DEMO CD 1. Request Cisco WCS demonstration license at or 2. Go to the Licenses Not Requiring a PAK panel and click the here for available licenses link (Figure 5) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 13

115 Licensing and Ordering Guide Figure 5. Product License Registration for WCS Demo CD 3. Select Wireless Control System > Wireless Control System 30 day trial license (Figure 6). Figure 6. Select 30 day trial license 4. Fill out the forms (registration, ) on the screens that follow. Ensure that the correct host name of your target Cisco WCS server is entered. You will receive an titled Wireless Control System Field Demo License from This is sent to your registered . Note: The PAK registration is automatically completed during this registration process. You do not need to go the PAK web site as you would for SKUs you purchase Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 13

116 Licensing and Ordering Guide 5. Download Cisco WCS Software for Cisco WCS Demonstration License. Follow the steps in the section Step 3: Installing Software to reach that download screen. The that is sent from Cisco licensing does not contain the Cisco WCS software image. 6. Open the received from titled Wireless Control System Field Demo License. Note: Cisco WCS software should be already installed on the server. 7. Follow the instructions in the to activate the Cisco WCS demonstration license. Note: TAC support is not available for the demonstration license. You can convert the demo license to a non-expiring license at anytime during the 30 day trial period. All WLAN configuration information created in the original installation are retained during these upgrades. Customers wishing to upgrade the demonstration license to non-expiring licenses with higher access point quantities may do so by purchasing one of the Cisco WCS license SKUs from the Cisco Ordering Tool. Printed in USA C / Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 13

117 Data Sheet Cisco 3300 Series Mobility Services Engine: An Open, Appliance-Based Platform for Delivering Mobility Services Product Overview The Cisco 3300 Series Mobility Services Engine (Figure 1) is an open platform that provides a new approach to the delivery of mobility services in a centralized and scalable fashion. A combination of hardware and software, the Cisco 3300 Series Mobility Services Engine (MSE) is an appliance-based solution that supports a suite of software services. The Mobility Services Engine transforms the wireless LAN into a mobility network by abstracting the application layer from the network layer, effectively allowing for the delivery of mobile applications across wired and wireless networks. Figure 1. Cisco 3300 Series Mobility Services Engine To deliver true business mobility, IT must take a practical approach focused on unifying networks, managing the wave of mobile devices, and enabling mobile application development. The Cisco 3300 Series Mobility Services Engine is at the heart of this mobility architecture evolution. It provides an open API that allows a broader ecosystem of partners to access network intelligence in developing industry-relevant mobility solutions. The Mobility Services Engine is part of the Cisco Unified Wireless Network, delivering a comprehensive approach to business mobility - an approach that extends applications to the right device at the right time, no matter which network is being used. Mobility Services Architecture Cisco Mobility Services are a set of value-added network services that consolidate intelligence from various points in the network to enable and optimize the delivery of business mobility applications. This intelligence has typically been highly distributed throughout the network, resulting in complex service provisioning and management. When services, control, and data planes are combined in a single platform, the added complexity limits the network s ability to scale and adapt to new services while maintaining consistent performance. The answer lies in centralized services architecture. While still critical to the ability of networks to provide the intelligence for the optimal performance of mobile applications, mobility services should be abstracted from the control and data planes in order to be centralized in the services engine. This centralization of services offers several benefits, including scalability and improved provisioning and management. Additionally, centralized services architecture removes the direct linkage between service and network, allowing services to extend across wired and wireless networks Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8

118 Increasingly, the mobility network must be able to support a great many applications at once. The true value of mobility services is delivered through their ability to enhance application performance by providing real-time information from the network and related applications. This cross-pollination of network and application intelligence has a synergistic effect, augmenting the richness and breadth of the types of mobility solutions that can be delivered. At the same time, a critical component of services delivery is helping to ensure that third-party applications have a standard interface by which they can access this network and application intelligence. The Cisco Mobility Services Engine supports an open API based on Simple Object Access Protocol/Extensible Markup Language (SOAP/XML), which provides northbound access to these services to an ecosystem of mobility application partners. With service intelligence centralized from the control network into the Mobility Services Engine, IT can open access to the API without concern about disruption to the underlying production network. Mobility Services Availability The Cisco 3300 Series Mobility Services Engine is a combination of hardware and software infrastructure that supports a suite of mobility services programs. Designed as an open platform, the Mobility Services Engine supports mobility services software in a modular fashion, with various configuration options based on network topology and the types of services required. The true value of the Mobility Services Engine is delivered through the various mobility services applications. Cisco supports existing and future software, including: Cisco Context-Aware Software: These programs capture and integrate into business processes detailed contextual information about such things as location, RF interferers, temperature, availability, and applications used. Context-aware applications feature a wide range of location options, including real-time location, presence detection, historical visibility and impact of interferers, and telemetry of an asset. Support for enhanced received signal strength indication (RSSI) and time difference of arrival (TDoA) technology delivers accuracy and performance for a broad range of environments. Cisco Adaptive Wireless Intrusion Prevention System (Adaptive wips) software provides visibility and comprehensive threat prevention for the mobility network through monitoring, alerts, classifying, and remediation of wireless and wired network vulnerabilities. These services represent the initial suite of software supported on the Cisco Mobility Services Engine. Mobility Services Engine integrates with Cisco CleanAir technology at a system level to provide crucial forensics and policy enforcement capabilities. These capabilities make it possible for IT to provide mission-critical wireless networking along with quick troubleshooting and problem resolution to create a self-healing, self-optimizing wireless network. Cisco will deliver additional software services in the future. The Cisco Mobility Services Engine, in conjunction with the services provided, increases productivity and improves a return on your investment. Product Architecture The Cisco 3300 Series Mobility Services Engine provides the following architectural elements: A common API framework A common management plane for services design, deployment, and operation (monitoring, reporting, and troubleshooting) Management of services provided by the Cisco Wireless Control System (WCS) Scalable infrastructure to support the instantiation of additional services Architecture allows services to span across multiple engines to facilitate flexibility in deployment 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8

119 Loose coupling among services Facilitates easy integration into framework (plug and play) Message-Based Collaboration-Service Oriented Architecture (SOA) model, in which individual services can be managed independently without affecting others Integrated with the Cisco Unified Wireless Network Figure 2 shows the Cisco 3300 Series Mobility Services Engine architecture. Figure 2. The Mobility Services Engine Architecture Features and Benefits The Cisco 3300 Series Mobility Services Engine delivers the following critical features and benefits: Extensible platform for rapid delivery of services and applications Allows the abstraction of services and applications from control planes and the network so that each may evolve independently Common framework for hosting multiple mobility services Open API to support third-party and partner application development Ecosystem of application partners To deliver mobility solutions targeted at various industries, including healthcare, retail, education, and manufacturing Scalability Multiple services can be deployed on a single Cisco Mobility Services Engine, or a single service can span multiple Cisco Mobility Services Engines Manageability The Cisco Mobility Services Engine serves as a single point of integration for the various value-added services 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8

120 All mobility services are managed centrally through the integration with the Cisco Wireless Control System Flexibility The Cisco Mobility Services Engine is an extensible platform capable of supporting a variety of services configurations to meet business requirements. The architecture enables the inclusion of newer technology standards as and when they become available Return on investment The Cisco Mobility Services Engine integrates with the Cisco Unified Wireless Network to provide network intelligence, including contextual information to optimize business applications. This architecture builds upon the existing investment in Cisco wireless and mobility solutions and provides a platform that is both flexible and scalable to meet evolving business mobility requirements Product Specifications Table 1 lists product specifications for the two models of the Cisco 3300 Series Mobility Services Engine. Table 2 lists specifications for the Cisco Mobility Services Engine Virtual Appliance. Table 1. Cisco 3300 Series Mobility Services Engine Product Specifications (Physical Appliances) Feature Cisco 3310 Mobility Services Engine Cisco 3355 Mobility Services Engine Supported Services Cisco Context-Aware Software to track up to 2000 devices Cisco Adaptive Wireless Intrusion Prevention System software to support up to 2000 monitor mode access points Cisco Context-Aware Software to track up to devices Cisco Adaptive Wireless Intrusion Prevention System software to support up to 3000 monitor mode or enhanced local mode (ELM) access points Evaluation Support Customers who purchase a mobility service have the option to try other mobility services on their MSE at the following scale: Context-aware client tracking: 100 clients Context-aware tag tracking: 100 tags Adaptive wireless intrusion prevention: 20 monitor mode access points Customers who purchase a mobility service have the option to try other mobility services on their MSE at the following scale: Context-aware client tracking: 100 clients Context-aware tag tracking: 100 tags Adaptive wireless intrusion prevention: 20 monitor mode or enhanced local mode access points Processor (1) Dual-Core Intel Processor 1.8 GHz (2) Quad-Core Intel Nehalem Processor 2.0 GHz, 4-MB cache Memory 4-GB PC (4 x 1 GB) 16-GB DDR3 (2 x 8 GB) Hard Disk Two fixed 247-GB Serial ATA-150/SATA 300-MBps drives Four hot-swappable 146-GB SAS drives with up to 6-Gbps transfer rate Removable Media DVD/CD-RW combo drive DVD-RO drive Ports Connectivity Serial: One 9-pin connector RJ-45: Two RJ-45 connectors for connection to two Gigabit Network Adapters Three USB 2.0 ports: one front and two rear accessible ports Two PS2 ports: One mouse and one keyboard One VGA port Network: Two embedded Multifunction Gigabit Network Adapters Four USB ports: two in front, two in back Two VGA ports: one in front and one in back One RJ-45 management port for out-of-band management RJ-45: Two rear RJ-45 connectors for connection to two Gigabit Network Adapters Network: Two embedded Multifunction Gigabit Network Adapters with TCP/IP offload engine Management SNMP v1, v2c, and v3 SNMP v1, v2c, and v3 Management Interface Cisco WCS Mobility Services Version 5.2 or later running Internet Explorer 6.0/Service Pack 1 or later Cisco WCS Mobility Services Version 7.1 or later running Internet Explorer 6.0/Service Pack 1 or later 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8

121 Feature Cisco 3310 Mobility Services Engine Cisco 3355 Mobility Services Engine Network Devices Cisco 2500 and 5500 Series Wireless LAN Controllers Cisco Catalyst 6500 Series Wireless Services Module 2 Cisco Wireless Controller on Cisco Services-Ready Engine (SRE) Cisco Flex 7500 Series Cloud Controller Cisco Aironet Lightweight Access Points Cisco 2500 and 5500 Series Wireless LAN Controllers Cisco Catalyst 6500 Series Wireless Services Module 2 Cisco Wireless Controller on Cisco Services-Ready Engine (SRE) Cisco Flex 7500 Series Cloud Controller Cisco Aironet Lightweight Access Points System Specifications Number of MSEs per NCS: 10 Number of Endpoints per Wireless LAN Controller: WLC 2500: 500 WLC on SRE for ISR G2: 500 WLC 5500: 5,000 WiSM2: 5,000 Flex7500: 5,000 Number of MSEs per NCS: 10 Number of Endpoints per Wireless LAN Controller: WLC 2500: 500 WLC on SRE for ISR G2: 500 WLC 5500: 5,000 WiSM2: 5,000 Flex7500: 5,000 Programming Interfaces SOAP/XML APIs SOAP/XML APIs Form Factor 1RU 1RU Physical Dimensions Power Height: 1.70 in. (4.32 cm) Width: in. (42.62 cm) Depth: 20 in. Weight: 15 lbs maximum AC power supply wattage: 540W AC power supply voltage: V at Hz; V at Hz Height: 1.69 (43mm) Width: 17.3 (440mm) Depth: 28.0 (711.4mm) Weight: 28 (minimum) lb (maximum) ( kg) AC power supply wattage: 625W AC power supply voltage: V at Hz; V at Hz 92% efficient Auto switching, hot-swappable Redundant power supplies Cooling Fans Total of three fans Total of six fans, 3+3 redundant configuration Environmental Operating temperature: 50 to 95 F (10 to 35 C) at sea level Nonoperating temperature: -40 to 158 F (-40 to 70 C) Maximum rate of change is 20 C/hr (36 F/hr) Operating temperature: 50 to 95 F (10 to 35 C) up to 3000 ft/914.4m 50 to 90 F (10 to 32 C) 3000 ft to 7000 ft/914.4m to 2133m Nonoperating temperature: -40 to 140 F (-40 to 60 C) Maximum rate of change is 20 C/hr (36 F/hr) v Air temperature - Server on: 10 C to 35 C (50 F to 95 F) Altitude: 0 to m (3000 ft), Decrease system temperature by 1.0 C for every 1000-foot increase in altitude v Air temperature - Server off: 5 C to 45 C (41 F to 113 F) Maximum altitude: 3048m (10000 ft) Shipment: -40 C to 60 C (-40 F to 140 F) Maximum altitude: 3048m (10000 ft) v Humidity - Server on: 20% to 80% Maximum dew point: 21 C Maximum rate of change: 5 C/hr v Humidity - Server off: 8% to 80% Maximum dew point: 27 C 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 8

122 Feature Cisco 3310 Mobility Services Engine Cisco 3355 Mobility Services Engine Approvals and Compliance Safety UL CAN/CSA -C22.2 No EN60950 IEC 60950: EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN EN Safety UL CAN/CSA -C22.2 No EN60950 IEC 60950: EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN EN Energy Star compliant Software Compatibility Available with Cisco Mobility Services Engine (MSE) Software Release 5.2 or later Requires Cisco Wireless LAN Controller (WLC) Software Version or later and Cisco Wireless Control System (WCS) Version 5.2 or later Multiple mobility services can run concurrently on the same MSE using WLC and MSE Software Release 6.0 or later Supported services may have different software requirements Available with Cisco Mobility Services Engine (MSE) Software Release 6.0 or later Requires Cisco Wireless LAN Controller (WLC) Software Version or later and Cisco Wireless Control System (WCS) Version 6.0 or later Multiple mobility services can run con-currently on the same MSE using WLC and MSE Software Release 6.0 or later Supported services may have different software requirements Table 2. Cisco Mobility Services Engine Virtual Appliance Product Specifications VMWare ESXi Version (Virtual Appliance on a Customer- Supplied Server) Minimum Server Requirements VMWare ESX & ESXi version 4.1 Cisco MSE High-End Virtual Appliance 50,000 Context-Aware License 10,000 awips License Minimum RAM: 20GB Minimum Hard disk space allocation: 500GB Disk System Throughput: Minimum of 1600 IOPS with a bandwidth of 6000 Kbytes/sec Physical cores: 16 at 2.13GHz or better (2x Intel Xeon E7-L8867) Cisco MSE Standard Virtual Appliance 18,000 Context-Aware License 5,000 awips License Minimum RAM: 11GB Minimum Hard disk space allocation: 500GB Disk System Throughput: Minimum of 1000 IOPS with a bandwidth of 3500 Kbytes/sec Physical cores: 8 at 2.93GHz or better (2x Intel Xeon X5570) Cisco MSE Low-End Virtual Appliance 2,000 Context-Aware License 2,000 awips License Minimum RAM: 6GB Minimum Hard disk space allocation: 500GB Disk System Throughput: Minimum of 900 IOPS with a bandwidth of 3000 Kbytes/sec Physical cores: 2 at 2.93GHz or better (2x Intel Xeon X5570) 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8

123 Virtual Appliance Reference HW Configs UCS C460 M2 Rack Mount Server (High-End Virtual Appliance) Two Intel Xeon(R) CPU 2.13GHz Disk System Throughput: Minimum of 1600 IOPS with a bandwidth of 6,000 Kbytes/sec UCS C250 M2 Rack Mount Server (Standard Virtual Appliance) Two Intel Xeon(R) CPU 2.93GHz Disk System Throughput: Minimum of 1100 IOPS with a bandwidth of 4,000 Kbytes/sec UCS C250 M2 Rack Mount Server (Low-End Virtual Appliance) Two Intel Xeon(R) CPU 2.93GHz Disk System Throughput: Minimum of 900 IOPS with a bandwidth of 3,000 Kbytes/sec Summary The Cisco 3300 Series Mobility Services Engine transforms existing wireless LANs into comprehensive mobility networks through a uniform method of mobility services delivery. It integrates with the Cisco Unified Wireless Network to build on existing business mobility investments. The variety of services, including the ability to collect contextual information on people, interferers, and assets, optimizes business processes. The open API of the Mobility Services Engines enables Cisco partners to expand the capabilities of the business mobility network and to deliver relevant industry solutions. Ordering Information Table 3 lists ordering information for the Cisco 3300 Series Mobility Services Engine. To place an order, visit: Table 3. Part Number Ordering Information Product Name AIR-MSE-3355-K9 AIR-MSE-3310-K9 L-MSE-7.0-K9 Cisco 3355 Series Mobility Services Engine Cisco 3310 Series Mobility Services Engine Cisco Mobility Services Engine Virtual Appliance Service and Support Cisco Wireless LAN Services Seamlessly integrate mobile services and take full advantage of the systemwide capabilities of the Cisco Unified Wireless Network with services from Cisco and our partners. Better utilize the increased performance of the n standard while simplifying the transition to this new technology. For details, visit: For More Information For more information about Cisco Mobility Solutions, visit or contact your local Cisco account representative Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 8

124 Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8

125 APC Smart-UPS X 3000VA Rack/Tower LCD V Page 1 of 4 5/1/2013 You are here: Home > Products > Uninterruptible Power Supply (UPS) > Network and Server > Smart-UPS APC Smart-UPS X 3000VA Rack/Tower LCD V Part Number: SMX3000RMLV2U Technical Specifications Product Overview Documentation Software & Firmware Options Ratings and Reviews Output Output Power Capacity Max Configurable Power Nominal Output Voltage Output Voltage Distortion 2700 Watts / 3000 VA 2700 Watts / 3000 VA 120V Less than 5% at full load Output Frequency (sync to mains) Hz for 50 Hz nominal, Hz for 60 Hz nominal Topology Waveform Type Line Interactive Sine wave Output Connections (3) NEMA 5-15R (3) NEMA 5-20R (1) NEMA L5-30R Input Nominal Input Voltage Input Frequency 120V 50/60 Hz +/- 3 Hz (auto sensing)

126 APC Smart-UPS X 3000VA Rack/Tower LCD V Page 2 of 4 5/1/2013 Input Connections NEMA L5-30P Cord Length Input voltage range for main operations Transfer Time 8 feet (2.44 meters) V 2-4 ms Batteries & Runtime Battery Type Typical recharge time Replacement Battery Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof 3 hour(s) APCRBC117 RBC Quantity 1 Extended Run Options APC Smart-UPS X 3000VA Rack/Tower LCD V Runtime Graph Curve A Part Number(s) SMX3000RMLV2U SMX3000RMLV2U B + (1) SMX120RMBP2U SMX3000RMLV2U C + (2) SMX120RMBP2U SMX3000RMLV2U D + (3) SMX120RMBP2U SMX3000RMLV2U E + (4) SMX120RMBP2U Hover over the line on the graph above to view the runtime at any desired load Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output. View Enlarged Graph View Runtime Chart Energy Use/Efficiency

127 APC Smart-UPS X 3000VA Rack/Tower LCD V Page 3 of 4 5/1/2013 Load Efficiency 25% 95.9% 50% 97.4% 75% 97.6% 100% 97.5% Communications & Management Hover over the line on the graph above to view the efficiency at any desired load Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output. View Enlarged Graph Interface Port(s) Available SmartSlot Interface Quantity Control panel Audible Alarm Emergency Power Off (EPO) SmartSlot 1 LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Yes Surge Protection and Filtering Surge energy rating Filtering 540 Joules Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Data Line Protection -- Physical Maximum Height Maximum Width Maximum Depth Rack Height Net Weight Shipping Weight Shipping Height Shipping Width Shipping Depth 3.36 inches (85 mm) inches (432 mm) inches (667 mm) 2U lbs. (38.45 kg) lbs. (45.36 kg) 9.58 inches (243 mm) inches (596 mm) inches (869 mm)

128 APC Smart-UPS X 3000VA Rack/Tower LCD V Page 4 of 4 5/1/2013 Color Black Units per Pallet 8.00 # of Layers per Pallet 4 # of Units per Layer per Pallet 2 Pallet Weight lbs. ( kg) Environmental Operating Environment F (0-40 C) Operating Relative Humidity 0-95% Operating Elevation Storage Temperature feet ( meters) F ( C) Storage Relative Humidity 0-95% Storage Elevation Audible noise at 1 meter from surface of unit Online Thermal Dissipation feet ( meters) dba BTU/hr Conformance Regulatory Approvals Standard Warranty BSMI, CSA, EN , EN Class A, FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A 3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available Equipment protection policy Lifetime : $ Sustainable Offer Status RoHS REACH PEP EOLI Compliant REACH: Contains No SVHCs Available in Documentation tab Available in Documentation tab *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary. **The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

129 APC Smart-UPS X 120V External Battery Pack Rack/Tower Page 1 of 2 5/1/2013 You are here: Home > Products > Smart-UPS Battery Systems APC Smart-UPS X 120V External Battery Pack Rack/Tower Part Number: SMX120RMBP2U Technical Specifications Product Overview Documentation Options Ratings and Reviews Output battoutvolt 120 Batteries & Runtime Battery Volt-Amp-Hour Capacity 1200 Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Battery mounting Enclosed battery cartridge Battery manufacturer -- Expected Battery Life (years) 3-5 RBC Quantity 2 Battery blocks per string 10 Physical Net Weight Maximum Height Maximum Width lbs. (56.36 kg) 3.36 inches (85 mm) inches (432 mm)

130 APC Smart-UPS X 120V External Battery Pack Rack/Tower Page 2 of 2 5/1/2013 Maximum Depth Shipping Weight Shipping Width Shipping Height Shipping Depth Rack Height Color inches (667 mm) lbs. (63.64 kg) inches (596 mm) 9.58 inches (243 mm) inches (869 mm) 2U Black Units per Pallet 8.00 Environmental Operating Environment F (0-40 C) Operating Relative Humidity 0-95% Operating Elevation Storage Temperature feet ( meters) F ( C) Storage Relative Humidity 0-95% Storage Elevation feet ( meters) Conformance Standard Warranty 2 years repair or replace Sustainable Offer Status RoHS REACH PEP EOLI Compliant REACH: Contains No SVHCs Available in Documentation tab Available in Documentation tab *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary.

131 APC Smart-UPS 3000VA LCD RM 2U 120V Page 1 of 4 5/1/2013 You are here: Home > Products > Uninterruptible Power Supply (UPS) > Network and Server > Smart-UPS APC Smart-UPS 3000VA LCD RM 2U 120V Part Number: SMT3000RM2U Technical Specifications Product Overview Documentation Software & Firmware Options Ratings and Reviews Output Output Power Capacity Nominal Output Voltage 2700 Watts / 2880 VA 120V Output Voltage Distortion Less than 5% Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Topology Waveform Type Line Interactive Sine wave Output Connections (6) NEMA 5-15R (2) NEMA 5-20R Input Nominal Input Voltage Input Frequency Input Connections 120V 50/60 Hz +/- 3 Hz (auto sensing) NEMA L5-30P

132 APC Smart-UPS 3000VA LCD RM 2U 120V Page 2 of 4 5/1/2013 Cord Length Input voltage range for main operations Input voltage adjustable range for mains operation 8 feet (2.44 meters) V V Batteries & Runtime Battery Type Typical recharge time Replacement Battery Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof 3 hour(s) RBC43 RBC Quantity 1 Runtime Graph Hover over the line on the graph above to view the runtime at any desired load Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output. View Enlarged Graph View Runtime Chart Energy Use/Efficiency Load Efficiency 25% 97.9% 50% 98.5% 75% 98.4% 100% 98.2% Communications & Management Hover over the line on the graph above to view the efficiency at any desired load Curve fit of data measured in accordance with the ENERGY STAR Program Requirements Product Specification for Uninterruptible Power Supplies (UPSs) - Eligibility Criteria Version 1.0. All measurements taken in normal mode(s), at typical environmental conditions, with 120V/60Hz electrical input and balanced resistive load (PF = 1.0) output. View Enlarged Graph Interface Port(s) Available SmartSlot Interface Quantity Control panel USB 1 LED status display with On Line : On Battery : Replace Battery and Overload

133 APC Smart-UPS 3000VA LCD RM 2U 120V Page 3 of 4 5/1/2013 indicators, Multi-function LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Surge Protection and Filtering Surge energy rating 459 Joules Physical Maximum Height Maximum Width Maximum Depth Rack Height Net Weight Shipping Weight Shipping Height Shipping Width Shipping Depth Color 3.39 inches (86 mm) inches (480 mm) inches (683 mm) 2U lbs. (44.28 kg) lbs. (51.70 kg) inches (254 mm) inches (600 mm) inches (980 mm) Black Units per Pallet 8.00 Environmental Operating Environment F (0-40 C) Operating Relative Humidity 0-95% Operating Elevation Storage Temperature feet ( meters) F ( C) Storage Relative Humidity 0-95% Storage Elevation Audible noise at 1 meter from surface of unit Online Thermal Dissipation feet ( meters) dba BTU/hr Conformance Regulatory Approvals CSA, ENERGY STAR (USA), FCC Part 15 Class A, UL 1778 Standard Warranty 3 years repair or replace (excluding battery) and 2 year for battery Equipment protection policy Lifetime : $ Sustainable Offer Status RoHS REACH PEP Compliant REACH: Contains No SVHCs Available in Documentation tab

134 APC Smart-UPS 3000VA LCD RM 2U 120V Page 4 of 4 5/1/2013 EOLI Available in Documentation tab *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary. **The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

135 APC Smart-UPS 2200VA RM 2U LCD 120V Page 1 of 5 4/12/2012 You are here: Home > Products > Uninterruptible Power Supply (UPS) > Network and Server > Smart-UPS APC Smart-UPS 2200VA RM 2U LCD 120V Part Number: SMT2200RM2U Technical Specifications Product Overview Documentation Software & Firmware Options Ratings and Reviews Output Output Power Capacity Max Configurable Power Nominal Output Voltage Waveform Type 1980 Watts / 2200 VA 1980 Watts / 2200 VA 120V Sine wave Output Connections (6) NEMA 5-15R (2) NEMA 5-20R Input Nominal Input Voltage Input Frequency 120V 50/60 Hz +/- 3 Hz (auto sensing) Input Connections NEMA 5-20P Cord Length 8 feet (2.44 meters)

136 APC Smart-UPS 2200VA RM 2U LCD 120V Page 2 of 5 4/12/2012 Input voltage range for main operations Input voltage adjustable range for mains operation V V Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time Replacement Battery RBC Quantity 1 Runtime Graph 3 hour(s) RBC43 Energy Use/Efficiency Hover over the line on the graph above to view the runtime at any desired load Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output. View Enlarged Graph View Runtime Chart Load Efficiency 25% 97.0% 50% 97.5%

137 APC Smart-UPS 2200VA RM 2U LCD 120V Page 3 of 5 4/12/ % 97.3% 100% 96.9% Hover over the line on the graph above to view the efficiency at any desired load Curve fit to measured efficiency data All measurements taken in

138 APC Smart-UPS 2200VA RM 2U LCD 120V Page 4 of 5 4/12/2012 Communications & Management Interface Port(s) Available SmartSlot Interface Quantity Control panel Audible Alarm USB Emergency Power Off (EPO) Yes 1 LED status display with On Line : On Battery : Replace Battery and Overload indicators,multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Surge Protection and Filtering Surge energy rating 530 Joules Physical Maximum Height 3.39 inches (86 mm) Maximum Width inches (480 mm) Maximum Depth inches (683 mm) Rack Height 2U Net Weight lbs. (42.31 kg) Shipping Weight lbs. (49.73 kg) Shipping Height inches (254 mm) Shipping Width inches (600 mm) Shipping Depth inches (980 mm) Color Black Units per Pallet 8.00 Environmental Operating Environment Operating Relative Humidity 0-95% Operating Elevation Storage Temperature Storage Relative Humidity 0-95% Storage Elevation Audible noise at 1 meter from surface of unit F (0-40 C) feet ( meters) F ( C) feet ( meters) dba

139 APC Smart-UPS 2200VA RM 2U LCD 120V Page 5 of 5 4/12/2012 Online Thermal Dissipation BTU/hr Conformance Regulatory Approvals CSA,FCC Part 15 Class A,UL 1778 Standard Warranty Equipment protection policy Lifetime : $ years repair or replace (excluding battery) and 2 year for battery Environmental Compliance RoHS 7b Exemption,REACH: Contains No SVHCs *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary. **The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

140 UPS Network Management Card 2 Page 1 of 2 11/23/2010 Home Products Uninterruptible Power Supply (UPS) UPS Management Product Family UPS Network Management Card 2 Part Number: AP9630 Communications & Management Protocols HTTP,HTTPS,IPv4,IPv6,NTP,SMTP,SNMP v1,snmp v3,ssh V1,SSH V2,SSL,TCP/IP,Telnet Network Interface Connections RJ-45 10/100 Base-T Authentication Radius Physical Net Weight Maximum Height Maximum Width Maximum Depth Shipping Weight Shipping Height Shipping Width Shipping Depth Color 0.18 lbs. (0.08 kg) 1.50 inches (38 mm) 4.75 inches (121 mm) 4.50 inches (114 mm) 0.75 lbs. (0.34 kg) 2.00 inches (51 mm) 9.25 inches (235 mm) 6.25 inches (159 mm) Black Environmental Operating Environment F (0-45 C) Storage Temperature F (-5-45 C) Operating Relative Humidity 0-95% Storage Relative Humidity 0-95% Operating Elevation feet ( meters) Storage Elevation feet ( meters) Conformance Regulatory Approvals AS/NZS 3548 (C-Tick) Class A,EN Class A,EN 55024,FCC Part 15

141 UPS Network Management Card 2 Page 2 of 2 11/23/2010 Standard Warranty Environmental Compliance Class A,GOST,ICES-003,VCCI Class A 2 years repair or replace RoHS,REACH: Contains No SVHCs,Contains Lithium Battery *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary. Copyright American Power Conversion Corp., all rights reserved

142 Rack PDU, Metered, Zero U, 30A, 120V, (24) Page 1 of 2 5/1/2013 You are here: Home > Products > Power Distribution > Rack Power Distribution > Metered Rack PDU Rack PDU, Metered, Zero U, 30A, 120V, (24) 5-20 Part Number: AP7832 Technical Specifications Product Overview Documentation Software & Firmware Options Output Nominal Output Voltage Maximum Total Current Draw per Phase 120V 24A Output Connections (24) NEMA 5-20R Overload Protection Yes Input Nominal Input Voltage Input Frequency Regulatory Derated Input Current (North America) Input Connections 100V, 120V 50/60 Hz 24A NEMA L5-30P Cord Length 10 feet (3.05 meters) Number of Power Cords 1

143 Rack PDU, Metered, Zero U, 30A, 120V, (24) Page 2 of 2 5/1/2013 Maximum Input Current per phase Load Capacity 30A 2880 VA Physical Net Weight Maximum Height Maximum Width Maximum Depth Shipping Weight Shipping Height Shipping Width Shipping Depth Color lbs. (5.68 kg) inches (1619 mm) 2.19 inches (56 mm) 1.73 inches (44 mm) lbs. (6.59 kg) inches (2134 mm) 6.00 inches (152 mm) 5.00 inches (127 mm) Black Environmental Operating Environment F (0-45 C) Operating Relative Humidity 5-95% Operating Elevation Storage Temperature feet ( meters) F ( C) Storage Relative Humidity 5-95% Storage Elevation feet ( meters) Conformance Regulatory Approvals Standard Warranty cul Listed, CSA C22.2 No , FCC Part 15 Class A, ICES-003, Industry Canada, UL 60950, UL years repair or replace Sustainable Offer Status RoHS REACH PEP EOLI Battery Directive Battery Notes Compliant REACH: Contains No SVHCs Available in Documentation tab Available in Documentation tab Compliant Contains Lithium Battery *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary.

144 Rack PDU, Metered, Zero U, 20A, 120V, (24) NEMA 5-20R Page 1 of 2 1/18/2013 You are here: Home > Products > Power Distribution > Rack Power Distribution > Metered Rack PDU Rack PDU, Metered, Zero U, 20A, 120V, (24) NEMA 5-20R Part Number: AP7830 Technical Specifications Product Overview Documentation Software & Firmware Options Output Nominal Output Voltage Maximum Total Current Draw per Phase 120V 20A Output Connections (24) NEMA 5-20R Overload Protection No Input Nominal Input Voltage Input Frequency Regulatory Derated Input Current (North America) Input Connections 100V, 120V 50/60 Hz 16A NEMA L5-20P Cord Length 10 feet (3.05 meters) Number of Power Cords 1

145 Rack PDU, Metered, Zero U, 20A, 120V, (24) NEMA 5-20R Page 2 of 2 1/18/2013 Maximum Input Current per phase Load Capacity 20A 1920 VA Physical Net Weight Maximum Height Maximum Width Maximum Depth Shipping Weight Shipping Height Shipping Width Shipping Depth Color lbs. (6.82 kg) inches (1619 mm) 2.19 inches (56 mm) 1.73 inches (44 mm) lbs. (7.73 kg) inches (2134 mm) 6.00 inches (152 mm) 5.00 inches (127 mm) Black Environmental Operating Environment F (-5-45 C) Operating Relative Humidity 0-95% Operating Elevation Storage Temperature feet ( meters) F ( C) Storage Relative Humidity 0-95% Storage Elevation feet ( meters) Conformance Regulatory Approvals Standard Warranty cul Listed, CSA C22.2 No , FCC Part 15 Class A, ICES-003, Industry Canada, UL , UL Listed 2 years repair or replace Sustainable Offer Status RoHS REACH PEP EOLI Battery Directive Battery Notes Compliant REACH: Contains No SVHCs Available in Documentation tab Available in Documentation tab Compliant Contains Lithium Battery *Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary.

146 Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network (Figures 1, 2 and 3). SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. Figure 1. Cisco optical Gigabit Ethernet SFP Figure 2. Cisco 1000BASE-T Copper SFP Figure 3. Cisco 2-channel 1000BASE-BX optical SFP 1000BASE-T SFP for Copper Networks The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX. 1000BASE-SX SFP for Multimode Fiber Only The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 µm multimode fiber links up to 550 m and on 62.5 µm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 µm multimode fiber cable Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 6