ZXV10 W812N V2 Product Datasheet [ 键入文档副标题 ] ZTE Corporation

Transcription

1 ZXV10 W812N V2 Product Datasheet [ 键入文档副标题 ] ZTE Corporation

2 I. Product Overview The W812N V2 is a high-level indoor dual-band n wireless LAN access device specially designed for the wireless broadband services of enterprises and governments. It can operate at 2.4GHz and 5GHz bands at the same time, in line with IEEE a/b/g/n. By using OFDM technology, it features high transmission rates, high receiver sensitivity and long transmission distance. It supports Ethernet PoE power supply and can access the MAN via the LAN. It is suitable for WLAN hotspots to provide the users with the WLAN access function and provide the basic telecom operators, ISPs and enterprises with wireless access solutions. In addition to the common WLAN AP functions, the W812N V2 also supports user data forwarding in the bridge mode (or in the routing mode), local management functions and NMS-based remote management functions. II. Product Appearance III. Product Features Dual-band access to improve user experience The W812N V2 can operate at 2.4GHz and 5GHz bands at the same time. It supports four protocols: a, b, g and n. Dual-band access can improve the total access bandwidth and user capacity of the W812N V2. As the 5GHz band has less interference, it can provide higher bandwidth for high-end users and vedio services. Gigabit Ethernet interface access The UL interface uses Gigabit Ethernet interface access, completely supporting interface bandwidth requirements for 11n rates. Strong network security function The W812N V2 provides abundant network security functions to protect against Xdos attacks, automatic virus isolation and Ping link failure diagnosis functions. It supports various encryption and authentication modes such as WEP, WPA2, 802.1X and WAPI, effectively protecting network security. Outstanding performance

3 By using a high-performance processor and large-capacity RAM/FLASH, the W812N V2 has high throughput and strong load capabilities. It supports automatic power adjustment, automatic frequency adjustment and load balancing to make large-scale wireless networking more flexible. Environment protection, energy conservation By using low-consumption components and insutry-leading integrated chip design solutions, the W812N V2 can reduce PoE switch load, improve heat dissipation perofrmance, and therefore greatly improve the running reliability. Excellent RF performance The advanced design solution and extensive RF design experience ensure that the W812N V2 has better RF performance than the homogeneous products. Mangement and maintenance features ZTE APs and WLAN unified management system NetNumen U31 platform support SNMP V2 V3 and have the most extensive MIB management parameters. The number of the AP-side MIB mangement parameters exceeds 450, meeting WLAN operation & maintenance & mangement requirements. Supporting integrated coordinated/standalone atchitecture The W812N V2 supports the integrated coordinated/standalone platform in terms of software software. Through software settings, it can switch between the coordinated and standalone AP modes. IV. Product Parameters Item Frequency range Carrier bandwidth Transmit power Antenna type Number of SSIDs Total weight Performance Index b/g/n: 2.412~2.472 GHz (China) a/n : 5.150~5.350 GHz 5.470~5.725 GHz 5.725~5.850 GHz (China) 20M/40M 2.4GHz: 100 mw 5.8GHz: 100 mw External, supporting 2x2 MIMO 2x kg Dimensions 180 mm x 165 mm x 50 mm (L x W x H) Physical interface One RJ45 10/100/1000M Ethernet interface (automatic

4 Item Performance Index MDI/MDI-X); Four RP-SMA antenna interfaces Working power Power consumption Working DC12V adapter and standard PoE power supply Whole-system power consumption: 10.0 W -10 to +55 environment Humidity Protection class 5%RH to 95%RH IP31 V. Application Scenarios The W812N V2 is an indoor wirelesss access point. It can be used to provide Wi -Fi signal coverage in indoor environments for wireless offices, wireless libraries, wireless storekeeping and Internet. The typical coordinated AP networking application is shown as follows. Coordinated AP networking As it can operate at the dual bands at the same time, the W812N V2 can not only improve network capacity and performance, but also enable flexible network coverage in the bridge mode. The bridge networking is shown as follows:

5 Bridge networking

6