VLANs. LAN Switching and Wireless Chapter 3. Version Cisco Systems, Inc. All rights reserved. Cisco Public 1
|
|
|
- Emily Bryant
- 5 years ago
- Views:
Transcription
1 VLANs LAN Switching and Wireless Chapter 3 Version Cisco Systems, Inc. All rights reserved. Cisco Public 1
2 Objectives Explain the role of VLANs in a converged network. Explain the role of trunking VLANs in a converged network. Configure VLANs on the switches in a converged network topology. Troubleshoot the common software or hardware misconfigurations associated with VLANs on switches in a converged network topology Cisco Systems, Inc. All rights reserved. Cisco Public 2
3 Explain the Role of VLANs in a Converged Network Explain the role of VLANs in a converged network 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3
4 Explain the Role of VLANs in a Converged Network Describe the different types VLANs 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4
5 Explain the Role of VLANs in a Converged Network Describe the VLAN port membership modes 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5
6 Explain the Role of VLANs in a Converged Network Describe how to manage broadcast domains with VLANs 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6
7 Explain the Role of Trunking VLANs in a Converged Network Explain the role of a trunk when using multiple VLANs in a converged network 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7
8 Explain the Role of Trunking VLANs in a Converged Network Describe how a trunk works 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8
9 Explain the Role of Trunking VLANs in a Converged Network Describe the switch port trunking modes 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9
10 Configure VLANs on the Switches in a Converged Network Topology Describe the steps to configure trunks and VLANs 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10
11 Configure VLANs on the Switches in a Converged Network Topology Describe the Cisco IOS commands used to create a VLAN on a Cisco Catalyst switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11
12 Configure VLANs on the Switches in a Converged Network Topology Describe the Cisco IOS commands used to manage VLANs on a Cisco Catalyst switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12
13 Configure VLANs on the Switches in a Converged Network Topology Describe the Cisco IOS commands used to create a trunk on a Cisco Catalyst switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13
14 Troubleshoot Common Software or Hardware Misconfigurations Associated with VLANs Describe the common problems with VLANs and trunks 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14
15 Troubleshoot Common Software or Hardware Misconfigurations Associated with VLANs Describe the common problems with VLANs and trunks 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15
16 Troubleshoot Common Software or Hardware Misconfigurations Associated with VLANs Describe how to use the troubleshooting procedure to fix a common problem with VLAN configurations 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16
17 Summary VLANS Allows an administrator to logically group devices that act as their own network Are used to segment broadcast domains Some benefits of VLANs include Cost reduction, security, higher performance, better management 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17
18 Summary Types of Traffic on a VLAN include Data Voice Network protocol Network management Communication between different VLANs requires the use of Routers 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18
19 Summary Trunks A common conduit used by multiple VLANS for intra-vlan communication EEE 802.1Q The standard trunking protocol Uses frame tagging to identify the VLAN to which a frame belongs Does not tag native VLAN traffic 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19
20 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20
VLANs Level 3 Unit 9 Computer Networks
VLANs Some Requirements of LANs Need to split up broadcast domains to make good use of bandwidth People in different departments may need to be grouped together for access to servers Security: restrict
Cisco Exploration 3 Module 3 LAN Switching and Wireless Jim Johnston Class Notes September 9, 2008
Cisco Exploration 3 Module 3 LAN Switching and Wireless Jim Johnston Class Notes September 9, 2008 VLAN is a logically separate IP subnetwork. This allows multiple networks to exist on a switch and provide
CHAPTER 1: VLANS. Routing & Switching
CHAPTER 1: VLANS Routing & Switching CHAPTER 1 1.1 VLAN Segmentation 1.2 VLAN Implementation 1.3 VLAN Security and Design 1.4 Summary CHAPTER 1 : OBJECTIVES Explain the purpose of VLANs in a switched network.
VLANs. CCNA Exploration Semester 3 Chapter Sep-13
VLANs CCNA Exploration Semester 3 Chapter 3 1 Topics The role of VLANs in a network Trunking VLANs Configure VLANs on switches Troubleshoot common VLAN problems 2 Semester 3 LAN Design Basic Switch Concepts
Antonio Cianfrani. Virtual LAN (VLAN)
Antonio Cianfrani Virtual LAN (VLAN) Ethernet Ethernet standard (IEEE 802.3) for Local Area Network (LAN). CSMA/CD (Carrier Sense Multiple Access/Collision Detection) Carrier Sense: all devices have to
Configuring Access and Trunk Interfaces
Configuring Access and Trunk Interfaces Ethernet interfaces can be configured either as access ports or trunk ports. Trunks carry the traffic of multiple VLANs over a single link and allow you to extend
Lab 7.5.3: Troubleshooting the Wireless WRT300N
Lab 7.5.3: Troubleshooting the Wireless WRT300N Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/1.5 5.5.5.10 255.255.255.0 N/A Fa0/1.10 192.168.10.1 255.255.255.0
Layer 2 Engineering VLANs
Layer 2 Engineering VLANs Campus Network Design & Operations Workshop These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)
VLAN Configuration via CLI on 300/500 Series Managed Switches
Article ID: 4986 4986 - VLAN Configuration via CLI on 300/500 Series Managed Switches Objective VLANs allow you to logically segment a LAN into different broadcast domains. In scenarios where sensitive
The following steps should be used when configuring a VLAN on the EdgeXOS platform:
EdgeXOS VLANs VLAN Overview This document provides an overview of what a VLAN is and how it is configured on the EdgeXOS platform. Use the step-by-step guide below to configure a VLAN on the Edge appliance
Chapter 3. Virtual Local Area Networks (VLANs) Part II
Chapter 3 Virtual Local Area Networks (VLANs) Part II CCNA3-1 Chapter 3-2 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor,
Sybex CCENT Chapter 11: VLANs and Inter-VLAN Routing. Instructor & Todd Lammle
Sybex CCENT 100-101 Chapter 11: VLANs and Inter-VLAN Routing Instructor & Todd Lammle Chapter 11 Objectives The CCENT Topics Covered in this chapter include: LAN Switching Technologies Describe how VLANs
Configuring VLANs CHAPTER
CHAPTER 8 This chapter describes how to configure your access point to operate with the VLANs set up on your wired LAN. These sections describe how to configure your access point to support VLANs: Understanding
University of Jordan Faculty of Engineering & Technology Computer Engineering Department Advance Networks Laboratory Exp.4 Inter-VLAN Routing
University of Jordan Faculty of Engineering & Technology Computer Engineering Department Advance Networks Laboratory 0907529 Exp.4 Inter-VLAN Routing Objectives 1. Describe the three primary options for
Chapter 3: VLANs. Routing & Switching
Chapter 3: VLANs Routing & Switching VLAN Definitions A VLAN is a logical partition of a Layer 2 network. VLANs logically group hosts, regardless of physical location. Multiple partitions can be created,
Cisco Exam Interconnecting Cisco Networking Devices Part 2 Version: 10.0 [ Total Questions: 149 ]
![Cisco Exam Interconnecting Cisco Networking Devices Part 2 Version: 10.0 [ Total Questions: 149 ]](/thumbs/85/92420323.jpg "Cisco Exam Interconnecting Cisco Networking Devices Part 2 Version: 10.0 [ Total Questions: 149 ]")
s@lm@n Cisco Exam 200-101 Interconnecting Cisco Networking Devices Part 2 Version: 10.0 [ Total Questions: 149 ] Topic break down Topic No. of Questions Topic 1: LAN Switching Technologies 18 Topic 2:
CCENT Study Guide. Chapter 11 VLANs and Inter-VLAN Routing
CCENT Study Guide Chapter 11 VLANs and Inter-VLAN Routing Chapter 11 Objectives The CCENT Topics Covered in this chapter include: 2.0 LAN Switching Technologies 2.4 Configure, verify, and troubleshoot
LAN design. Chapter 1
LAN design Chapter 1 1 Topics Networks and business needs The 3-level hierarchical network design model Including voice and video over IP in the design Devices at each layer of the hierarchy Cisco switches
Configuring Private VLANs
36 CHAPTER This chapter describes private VLANs (PVLANs) on Catalyst 4500 series switches. It also provides restrictions, procedures, and configuration examples. This chapter includes the following major
IP Phone 7940/7960 Fails to BootProtocol Application Invalid
IP Phone 7940/7960 Fails to BootProtocol Application Invalid Document ID: 67942 Contents Introduction Prerequisites Requirements Components Used Conventions Background Information Problem Solution Related
EXAM CERTIFICATION MAPPING
EAM CERTIFICATION MAPPING CCNA 3: SWITCHING BASICS AND INTERMEDIATE ROUTING 1 EAM MAPPING AND EAM TOPICS/AREAS 2 CCNA 3 Certification Exam Mappings Mapping of Cisco Academy CCNA 3 to the One exam certification
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 10 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the switch. It includes information about VLAN membership
5 Days Course on LAN Switching & Wireless and Accessing the WAN (CCNA 3 & 4)
PROFESSIONAL TRAINING COURSE 5 Days Course on LAN Switching & Wireless and Accessing the WAN (CCNA 3 & 4) About the Course This course is designed based on CCNA curriculum. Focus of this course is on two
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 16 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on your Catalyst 2950 or Catalyst 2955 switch. It includes information
Configuring VLANs. Understanding VLANs
This document describes how to configure your Cisco wireless mobile interface card (WMIC) to operate with the VLANs set up on your wired LAN. These sections describe how to configure your WMIC to support
Building Cisco Multilayer Switched Networks (BCMSN)
Building Cisco Multilayer Switched Networks (BCMSN) Table of Contents Module 1 Defining VLANs Implementing Best Practices for VLAN Topologies Describing Issues in a Poorly Designed Network Grouping Business
CISCO CCDP CISCO CERTIFIED DESIGN PROFESSIONAL
CISCO 300-115 CCDP CISCO CERTIFIED DESIGN PROFESSIONAL ABOUT 300-115 EXAM QUESTIONS Implementing Cisco IP Routing (ROUTE 300-115) is a 120-minute qualifying exam with 50 60 questions for the Cisco CCNP
Configuring VLANs. Finding Feature Information. Prerequisites for VLANs
Finding Feature Information, page 1 Prerequisites for VLANs, page 1 Restrictions for VLANs, page 2 Information About VLANs, page 2 How to Configure VLANs, page 7 Monitoring VLANs, page 19 Where to Go Next,
Switches running the LAN Base feature set support only static routing on SVIs.
Finding Feature Information, on page 1 Prerequisites for VLANs, on page 1 Restrictions for VLANs, on page 2 Information About VLANs, on page 2 How to Configure VLANs, on page 6 Monitoring VLANs, on page
Computer Networking. December 2004 CEN CN
Computer Networking CEN CN 1 Layer 2 - Bridge Frame Header Data Bridge Trailer Data Link Layer Physical Layer More complex than repeat, it requires hardware and software Bridges have diminished because
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 14 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094). It includes information about VLAN modes and the VLAN Membership
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 9 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094). It includes information about VLAN membership modes, VLAN configuration
Understanding Issues Related to Inter VLAN Bridging
Understanding Issues Related to Inter VLAN Bridging Document ID: 11072 Contents Introduction Prerequisites Requirements Components Used Conventions Spanning Tree Topology Concerns Recommended Use of Hierarchical
Chapter 5: Inter-VLAN Routing. Routing & Switching
Chapter 5: Inter-VLAN Routing Routing & Switching What is Inter-VLAN routing? Layer 2 switches cannot forward traffic between VLANs without the assistance of a router. Inter-VLAN routing is a process for
HPE2-Z39. Fast Track - Applying Aruba Switching Fundamentals for Mobility. Download Full version :
HP HPE2-Z39 Fast Track - Applying Aruba Switching Fundamentals for Mobility Download Full version : http://killexams.com/pass4sure/exam-detail/hpe2-z39 QUESTION: 44 A switch receives a broadcast frame
Abstract. GAK; Reviewed: WCH 8/14/2003. Solution & Interoperability Test Lab Application Notes 2003 Avaya Inc. All Rights Reserved.
Rapid Reconfiguration Spanning Tree Protocol (RSTP) 802.1w Sample Configurations for Avaya P882/P580 Gigabit Ethernet Switches with Third Party Vendors including Cisco, HP and Foundry - Issue 1.0 Abstract
Cisco Implementing Cisco IP Switched Networks (SWITCH v2.0)
Cisco 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) http://killexams.com/pass4sure/exam-detail/300-115 Question: 323 An administrator recently configured all ports for rapid transition
Lab 3.3 Configuring Wireshark and SPAN
Lab 3.3 Configuring Wireshark and SPAN Learning Objectives Install Wireshark on a host PC Configure a switch to use the SPAN monitoring tool. Topology Diagram Scenario In this lab, you will configure a
Switched Ethernet Virtual LANs
Switched Ethernet Virtual LANs Computer Networks Lecture 4 http://goo.gl/pze5o8 Switched Ethernet 2 LAN Switches Behave as bridges (operates in the logical tree topology) Switching is implemented by hardware
Configuring Dynamic VLAN Membership
CHAPTER 11 This chapter describes how to configure dynamic port VLAN membership by using the VLAN Membership Policy Server (VMPS). This chapter includes the following major sections: Understanding VMPS,
IEEE 802.1X Open Authentication
allows a host to have network access without having to go through IEEE 802.1X authentication. Open authentication is useful in an applications such as the Preboot Execution Environment (PXE), where a device
Configuring Private VLANs
CHAPTER 15 This chapter describes how to configure private VLANs on the Cisco 7600 series routers. Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco
Multicast VLAN Registration (MVR)
44 CHAPTER Restrictions for MVR, page 44-1 Restrictions for MVR, page 44-1 Information About MVR, page 44-2 Default MVR Configuration, page 44-5 How to Configure MVR, page 44-5 Displaying MVR Information,
Catalyst 1900 Series and Catalyst 2820 Series Enterprise Edition Software Configuration Guide
INDEX A allowed list, VLAN 2-28 to 2-29 ATM 2-5 firmware upgrade B-5 to B-7 LANE trunk connections 1-4 module 2-9, 2-13, 2-23 networks 2-5 trunk 2-4, 2-14 B bridge groups 3-15 bridge number 2-10 Bridge
Packet Tracer - Subnet Scenario 2 Topology
Topology 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5 Addressing Table Device Interface IP Address Subnet Mask Default Gateway G0/0 R1 S0/0/0 G0/0 S0/0/0
Table of Contents. Cisco Using One DHCP Server for Voice and Data Networks
Table of Contents Using One DHCP Server for Voice and Data Networks1 Document ID: 19580..1 Introduction.1 Prerequisites1 Requirements1 Components Used..1 Conventions..1 Problem.2 Solution.2 The Network
Configuring VLANs. Finding Feature Information. Prerequisites for VLANs
Finding Feature Information, page 1 Prerequisites for VLANs, page 1 Restrictions for VLANs, page 2 Information About VLANs, page 2 How to Configure VLANs, page 8 Monitoring VLANs, page 22 Where to Go Next,
Configuring your VLAN. Presented by Gregory Laffoon
Configuring your VLAN Presented by Gregory Laffoon 1 Overview of Networking Terms Networking Terms Overview OSI Model Defines a networking framework for implementing protocols in seven layers Control is
Configuring VLAN Trunks
Finding Feature Information, page 1 Prerequisites for VLAN Trunks, page 1 Information About VLAN Trunks, page 2 How to Configure VLAN Trunks, page 5 Configuration Examples for VLAN Trunking, page 20 Where
Implement Spanning Tree Protocols. LAN Switching and Wireless Chapter 5
Implement Spanning Tree Protocols LAN Switching and Wireless Chapter 5 ITE I Chapter 6 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Objectives Explain the role of redundancy in a converged
Lab - Troubleshooting VLAN Configurations (Instructor Version Optional Lab)
(Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or
CCNP SWITCH (22 Hours)
CCNP SWITCH 642-813 (22 Hours) Chapter-1 Enterprise Campus Network Design 1.1 IIN & SONA 1.2 Campus Network 1.3 Enterprise Model 1.4 Nonhierarchical Network Devices Layer-2 Switching, Layer-3 Routing Multilayer
Implement Inter-VLAN Routing. LAN Switching and Wireless Chapter 6 Modified by Tony Chen 11/01/2008
Implement Inter-VLAN Routing LAN Switching and Wireless Chapter 6 Modified by Tony Chen 11/01/2008 ITE I Chapter 6 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Notes: If you see any mistake
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 12 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the switch. It includes information about VLAN membership
Configuring Access Point Groups
Finding Feature Information, page 1 Prerequisites for Configuring AP Groups, page 1 Restrictions for, page 2 Information About Access Point Groups, page 2 How to Configure Access Point Groups, page 4 Additional
Configuring Cisco IP Phone Support
CHAPTER 16 This chapter describes how to configure support for Cisco IP phones on the Catalyst 6500 series switches. For complete syntax and usage information for the commands used in this chapter, refer
Configuring Q-in-Q VLAN Tunnels
This chapter describes how to configure Q-in-Q VLAN tunnels. Finding Feature Information, page 1 Feature History for Q-in-Q Tunnels and Layer 2 Protocol Tunneling, page 1 Information About Q-in-Q Tunnels,
ITDumpsKR. IT 인증시험한방에패스시키는최신버전시험대비덤프
ITDumpsKR http://www.itdumpskr.com IT 인증시험한방에패스시키는최신버전시험대비덤프 Exam : 300-115 Title : Implementing Cisco IP Switched Networks Vendor : Cisco Version : DEMO Get Latest & Valid 300-115 Exam's Question and
Configuring Private VLANs
Finding Feature Information, on page 1 Prerequisites for Private VLANs, on page 1 Restrictions for Private VLANs, on page 1 Information About Private VLANs, on page 2 How to Configure Private VLANs, on
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 14 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the Catalyst 3750 switch. It includes information about VLAN
Configuring VLANs CHAPTER
CHAPTER 13 This chapter describes how to configure your access point/bridge to operate with the VLANs set up on your wired LAN. These sections describe how to configure your access point/bridge to support
Lab 6.4.2: Challenge Inter-VLAN Routing
Lab 6.4.2: Challenge Inter-VLAN Routing Topology Diagram Addressing Table Device (Hostname) Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 192.168.99.11 255.255.255.0 192.168.99.1 S2 VLAN
Configuring Voice VLAN
CHAPTER 16 This chapter describes how to configure the voice VLAN feature on your switch. Voice VLAN is referred to as an auxiliary VLAN in the Catalyst 6000 family switch documentation. Note For complete
Spanning-Tree Protocol
Spanning-Tree Protocol Malin Bornhager Halmstad University Session Number 2002, Svenska-CNAP Halmstad University 1 Objectives Redundancy in a converged network Spanning-Tree Protocol (STP) STP Operation
The Octava HDDSX Matrix System works in conjunction with a Cisco SG-300 series managed Ethernet switch.
Octava HDDSX Matrix User Guide This User Guide is for control of the HDDSX Matrix using the feature of the CISCO SG300. For other types control, contact us. The Octava HDDSX Matrix System works in conjunction
Cisco Switch VLAN Setup (IOS)
Summary WirelessTrakker requires that the switch ports involved for connecting the components for WirelessTrakker be 802.1q VLAN tagged / trunked ports. These directions tell you how to do that. Note:
Maintaining Specific VLAN Identification. Comparing ISL and 802.1Q. VLAN Trunking
Maintaining Specific VLAN Identification Specifically developed for multi-vlan interswitch communications Places a unique identifier in each frame Functions at Layer 2 2003, Cisco Systems, Inc. All rights
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 11 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the Cisco ME 3400 Ethernet Access switch. It includes information
CCNA Security ( ) and CCNP ( , , )
4/20/2016 CCNA Security (640-554) and CCNP (300-101, 300-115, 300-135) CCNA Security (640-554) and CCNP (300-101, 300-115, 300-135) MSIT120 / 160 Hours / 12 Months / Self-Paced / Materials Included Course
1. Which two statements are true about VLAN implementation? (Choose two.)
CCNA 2 Chapter 3 v5.0 Exam Answers 2015 (100%) 1. Which two statements are true about VLAN implementation? (Choose two.) The size of the collision domain is reduced. The number of required switches in
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 11 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on your Catalyst 3550 switch. It includes information about VLAN
Gigabit Networks, VLANs & Wireless LANs
Hands-On Gigabit Networks, VLANs & Wireless LANs ( Advanced Local Area Networks ) Course Description This Hands-On course will discuss traditional Ethernet as it is evolving today and its future. Ethernet
Configuring Link Aggregation
Information About Link Aggregation, page 1 Restrictions for Link Aggregation, page 1 (GUI), page 3 (CLI), page 4 Verifying Link Aggregation Settings (CLI), page 4 Configuring Neighbor Devices to Support
Getting Started with Your Device Configuration
Quick Setup Tasks, page 1 Quick Setup Tasks On the first day with your new device, you can perform a number of tasks to ensure that your device is online, reachable and easily configured. The Day 0 wizard
Cisco Discovery Protocol Version 2
Cisco Discovery Protocol (formerly known as CDP) is a Layer 2, media-independent, and network-independent protocol that runs on Cisco devices and enables networking applications to learn about directly
Question No : 1 Which three of these statements regarding 802.1Q trunking are correct? (Choose three.)
Volume: 149 Questions Question No : 1 Which three of these statements regarding 802.1Q trunking are correct? (Choose three.) A. 802.1Q native VLAN frames are untagged by default. B. 802.1Q trunking ports
Configuring Private VLANs
36 CHAPTER This chapter describes private VLANs (PVLANs) on Catalyst 4500 series switches. It also provides restrictions, procedures, and configuration examples. This chapter includes the following major
Configuring VLANs. Understanding VLANs CHAPTER
7 CHAPTER This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the Cisco MWR 2941 router. It includes information about VLAN
Chapter 4 Configuring Switching
Chapter 4 Configuring Switching Using the Switching Tab The navigation tabs on the top of the home page include a Switching tab that lets you manage your GS108T Gigabit Smart Switch using features under
VLAN Configuration. Understanding VLANs CHAPTER
CHAPTER 11 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094) on the CGR 2010 ESM. It includes information about VLAN membership
Configuring Private Hosts
CHAPTER 25 This chapter describes how to configure the private hosts feature in Cisco IOS Release 12.2SX. Note For complete syntax and usage information for the commands used in this chapter, see the Cisco
CCNA 3 (v v6.0) Chapter 3 Exam Answers % Full
CCNA 3 (v5.0.3 + v6.0) Chapter 3 Exam Answers 2017 100% Full ccnav6.com /ccna-3-v5-0-3-v6-0-chapter-3-exam-answers-2017-100-full.html CCNA Exam Answers 2017 CCNA 3 (v5.0.3 + v6.0) Chapter 3 Exam Answers
Configuring VTP. Understanding How VTP Works CHAPTER
CHAPTER 13 This chapter describes how to configure the VLAN Trunking Protocol (VTP) on the Cisco 7600 series routers. For complete syntax and usage information for the commands used in this chapter, refer
Configuring the Switching Infrastructure for Mirage NAC Appliances
Configuring the Switching Infrastructure for Mirage NAC Appliances Executive Summary The purpose of this document is to explain how to configure the switch for use with the Mirage NAC appliance. Aside
Lab Network Baseline Discovery
Lab 1.2.6 Network Baseline Discovery Objective In this lab, the student will establish the baseline for the configuration and operation of the network. The student will complete the following tasks: Job
MAN Architecture. How Cisco IT Architected Headquarters MAN. A Cisco on Cisco Case Study: Inside Cisco IT
MAN Architecture How Cisco IT Architected Headquarters MAN A Cisco on Cisco Case Study: Inside Cisco IT 1 Overview Challenge: Rapid growth and IP telephony required a new standard platform for the Cisco
CCNA Routing and Switching Courses. Scope and Sequence. Target Audience. Curriculum Overview. Last updated August 22, 2018
CCNA Routing and Switching Scope and Sequence Last updated August 22, 2018 Target Audience The Cisco CCNA Routing and Switching curriculum is designed for Cisco Networking Academy students who are seeking
Configuring IEEE 802.1Q Tunneling
CHAPTER 26 This chapter describes how to configure IEEE 802.1Q tunneling in Cisco IOS Release 12.2SX. For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS
Packet Tracer - Subnet Scenario 2 (Instructor Version)
(Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology 2015 Cisco and/or its affiliates. All rights reserved. This document
Understanding PVLANs in UCS
Understanding PVLANs in UCS Introduction This document explains the PVLAN support in UCS - a feature which is introduced in the Balboa (1.4) release. This document explains the feature, the caveats and
CISCO Certified Network Associate (CCNAX)
CISCO Certified Network Associate (CCNAX) Overview This course is designed to prepare you for the Cisco Certified Network Associate Exam (CCNA) exams. You can choose to take a single composite exam or
Network Best Practices for Mitel Connect CLOUD
Network Best Practices for Mitel Connect CLOUD Abstract 1 Table of Contents Selecting Data Networking Equipment for a Mitel Connect Deployment... 3 Customer Site Cable Plant Requirements... 3 Designing
Configuring Voice VLAN
CHAPTER 15 This chapter describes how to configure the voice VLAN feature on the Catalyst 3750 switch. Unless otherwise noted, the term switch refers to a standalone switch and a switch stack. Voice VLAN
COPYRIGHTED MATERIAL. Table of Contents. Assessment Test
10089.book Page xi Monday, July 23, 2007 3:17 PM Introduction Assessment Test xxiii xxxiii Chapter 1 Internetworking 1 Internetworking Basics 4 Internetworking Models 11 The Layered Approach 12 Advantages
Configuring SPAN. Understanding SPAN CHAPTER. This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch.
CHAPTER 23 This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch. Note For complete syntax and usage information for the commands used in this chapter, see
Configuring Catalyst Switches for Polycom Conference Phones
Configuring Catalyst Switches for Polycom Conference Phones Document ID: 97229 Contents Introduction Prerequisites Requirements Components Used Related Products Conventions Background Information Configure
Tom O Callahan OCS Technology Planning and Strategy
2017 Meraki Network Template VLAN Design Templates: MX84/65,MS225,MR42 Examples of common network configurations Updated per the April 25 th All Archdiocesan conference call Note: Use the Meraki documentation
CCNA Exploration Network Fundamentals
CCNA Exploration 4.0 1. Network Fundamentals The goal of this course is to introduce you to fundamental networking concepts and technologies. These online course materials will assist you in developing
Lecture (03) VLANs. By: Dr. Ahmed ElShafee. Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II 4.0
Lecture (03) VLANs By: Dr. Ahmed ElShafee ١ Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II 4.0 ٢ Topology ٣ item Configuration item Configuration PC1 PC2 IP 10.0.2.1 IP 10.0.2.2 item Configuration
Troubleshooting LAN Switching Environments
CHAPTER 20 Troubleshooting LAN Switching Environments This chapter presents troubleshooting information for connectivity and performance problems in LAN switching environments. The sections in this chapter