Produkt-Datenblatt. Technische Daten, Spezifikationen. MEsstechnik fängt mit ME an. Kontakt

Transcription

1 Produkt-Datenblatt Technische Daten, Spezifikationen Kontakt Technischer und kaufmännischer Vertrieb, Preisauskünfte, Angebote, Test-Geräte, Beratung vor Ort: Tel: ( ) FAX: ( ) Aus dem Ausland: Tel: FAX: Internet: Web-Shop: Web Kontakt-Formular: Per Post: Meilhaus Electronic GmbH Am Sonnenlicht 2 D Alling bei München MEsstechnik fängt mit ME an. Erwähnte Firmen- und Produktnamen sind zum Teil eingetragene Warenzeichen der jeweiligen Hersteller. Preise in Euro zzgl. gesetzl. MwSt. Irrtum und Änderung vorbehalten. Meilhaus Electronic bzw. Hersteller.

2 WLg-xROAD/N ACKSYS Communications & Systems WiFi Access Point, Ethernet Bridge & Repeater (WDS) for automotive applications WiFi IEEE a/b/g/h & super AG, up to 108 Mbps Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS Web based configuration, SNMP administration Auto-sensing 10/100 Base TX network interface DC power supply input (+9VDC to +50VDC), POE IEEE 802.3af for /NP Shock & vibration proof rugged aluminum enclosure, IP65 seal rating FAST ROAMING Introduction WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards... It can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management. It fulfills the most severe requirements in terms of operating environment: from -25 C to +70 C, shockproof and vibration proof, protection against dust and water projections (IP65). The product is E-marked (CE standard for electronic equipments installed aboard vehicles), and can thus be installed in full safety aboard of all on-road equipments.

3 ACKSYS Communications & Systems Technical characteristics overview Ethernet Link WiFi network Data rate Channels Output power 10/100 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over Compliant to the IEEE a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks; «ClearVoice» band provides non-overlapping channels for fast data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on ATHEROS s AR5414 (AR5006XS) chip set. Up to 108 Mbps (Super AG mode) 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Transmitter +20 dbm (TPC) Sensitivity Receiver 92 dbm for IEEE a/g and -95 dbm for IEEE b Antenna Modulation Security Modes Administration Operating systems Signaling Power supply Consumption Dimensions & weight Standards Environment One 2dBi 2.4 / 5 GHz antenna, RP-SMA connector OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla...), SNMP agent, ACKSYS NDM Windows, Linux, UNIX as well as any operating system supporting TCP/IP LEDs signaling for LAN, WLAN network activity, 10/100 mode, power supply DC power supply (+9VDC to +50VDC) or PoE IEEE 802.3af (for the /NP model) 3.6W typical power consumption, 4W for the /NP model Shockproof rugged aluminum enclosure, (L: 115 x W: 64 x H: 35 mm), 370 g with the cable and without the antenna MIL-STD-810F method & (shocks & vibrations), IP65 seal rating EN & EN (CEM), E-marked (2004/104) Operating temperature: -25 C to +70 C (HR 0-99%), storage: -40 C to +80 C Ordering references WLg-xROAD/N WLg-xROAD/NP WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, power input from +9VDC to +50VDC, shipped with 1 dual band 2 dbi omnidirectional (2.4 / 5 GHz) antenna and 2 meters of Ethernet RJ45 cable Same as above with the power over Ethernet option (IEEE 802.3af) All the brand names mentioned in this document are trademarks. ACKSYS is constantly looking at ways to improve its products. The current specifications may therefore be modified without notice and the characteristics set out herein should not be construed as creating any contractual obligation. All the products featured herein are designed and manufactured in Europe.

4 WLg-xROAD-S ACKSYS Communications & Systems Wireless RS232 / RS422 / RS485 serial device server for automotive applications Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps 9-50 VDC wide range power supply IEEE802.11a/b/g/h WiFi radio (2.4/5GHz) MIL-STD-810 shock and vibration proof rugged aluminum enclosure, IP65 Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP) TCP Client / Server, UDP & MODBUS/TCP support FAST ROAMING Introduction WLg-xROAD/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer connection (Ad-Hoc mode). It is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards... it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management. It fulfills the most severe requirements in terms of operating environment: from -25 C to +70 C, shock and vibration proof according to MIL-STD-810F standard, protection against dust and water projections (IP65). The product is E-marked (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard all on-road equipments.

5 ACKSYS Communications & Systems Technical characteristics overview Serial port RS signals Cable connection WiFi network Radio data rate Channels Output power Full RS232 / 4222 / 485 (SUB D9 connector) serial interface, 250 Kbps RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and RX signals can be polarized with jumpers) 9-point terminal block for RS signals, 2-point for power supply, stuffing box cable output Compliant to the IEEE a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE a/b/g/h networks; «ClearVoice» band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS s AR5414 (AR5006XS) chip-set, single channel fast roaming (<50 ms) Up to 108 Mbps (Super AG mode) 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Transmitter +20 dbm (TPC) Sensitivity Receiver 92 dbm for IEEE a/g and -95 dbm for IEEE b Antenna Modulation Security Modes Administration Operating systems Signaling Power supply Dimensions & weight Standards Environment One 2 dbi bi-band external antenna, RP-SMA connector OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS) Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication (ad hoc) or from access point Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla...), SNMP agent, ACKSYS NDM, TELNET from the serial link Windows, Linux, UNIX as well as any operating system supporting TCP/IP Serial TxD & RxD, WLAN, mode, diagnostic and power (LEDs) +9VDC to +50VDC, 3.5 Watts typical Rugged aluminum enclosure (L: 115 mm x W: 64 mm x H: 35 mm) Weight: 330g (with the 40 cm serial cable) MIL-STD-810F methods & (shocks & vibrations), IP65 seal rating EN & EN (CEM), E-marked Operating temperature: -25 C to +70 C, storage: -40 C to +80 C Humidity: 0% to 99% (non-condensing) Ordering references WLg-xROAD/S Wireless RS232/RS422/RS485 device server over Ethernet IEEE a/b/g/h (WiFi 2.4 / 5 GHz), with Windows COM port redirector software (VIP), MODBUS/TCP data gateway, MODBUS/TCP gateway support, 9-50 VDC power supply, built-in antenna and RSMA connector for an external antenna, 40 cm serial cable with male SUB D9 connector All the brand names mentioned in this document are trademarks. ACKSYS is constantly looking at ways to improve its products. The current specifications may therefore be modified without notice and the characteristics set out herein should not be construed as creating any contractual obligation. All the products featured herein are designed and manufactured in Europe.