RS-232 Connector Pin Assignments
|
|
- Christiana Fox
- 5 years ago
- Views:
Transcription
1 APPENDIXB This appendix lists the connector pin assignments for the CDEs, and includes the following sections: Serial Console-Interface, page B- Ethernet, page B- Cable Pin Assignments, page B- Serial Console-Interface The serial console-interface connector is a 9-pin, RS- D-type, DTE connector. A null modem cable is required to connect a workstation running the Linux or Windows operating system. Table B- lists the pin assignments for the serial console interface-connector. Table B- RS- Description Pin I/O Signal Name Data carrier detect; input In DCD Receive data; input In RXD Transmit data; output Out TXD Data terminal ready; output Out DTR Interface signal ground GND Data set ready; input In DSR Ready to send; output Out RTS Clear to send; input In CTS Ring indicator; input 9 In RI Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide B-
2 Serial Console-Interface Appendix B Serial Port Connector The CDEs have one standard serial port connector located on the back of the device. Figure B- shows the pin number assignments for the 9-pin, male D-shell serial port connector on the back of the device. These pin number assignments conform to the industry standard for RS- communications. Figure B- Serial Port Connector 9 00 Table B- provides the RJ--to-DB-9 pinout information for the interconnections between the terminal server and a CDE. Table B- RJ- Connector to DB-9 Pinout Signal Name/ Function RJ- Pin RJ- DB-9 Pin TXD Yellow RXD RXD Black TXD DSR Orange DTR GND Green GND DTR Brown DSR RTS Blue CTS CTS Slate/Grey RTS GND Red GND White Purple Signal Name/ Function B- Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide
3 Appendix B Ethernet Ethernet The Ethernet connector is an -pin, modular RJ- connector. Table B- through Table B- list the Ethernet connector pin assignments. Table B- Ethernet for TA RJ- Pin Wire Color (TA) Wire Diagram (TA) 0BASE-T 00BASE-T 000BASE-T Signal White/Green Transmit+ BI_DA+ Green Transmit BI_DA White/Orange Receive+ BI_DB+ Blue Unused BI_DC+ White/Blue Unused BI_DC Orange Receive BI_DB White/Brown Unused BI_DD+ Brown Unused BI_DD Table B- Ethernet for TB RJ- Pin Wire Color (TB) Wire Diagram (TB) 0BASE-T 00BASE-T 000BASE-T Signal White/Orange Transmit+ BI_DA+ Orange Transmit BI_DA White/Green Receive+ BI_DB+ Blue Unused BI_DC+ White/Blue Unused BI_DC Green Receive BI_DB White/Brown Unused BI_DD+ Brown Unused BI_DD Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide B-
4 Fiber Connector Type Appendix B Table B- RJ- Crossover Cable Pin Assignments for TB RJ- Pin End Wire Color Diagram End RJ- Pin End White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown Ethernet Port Connector The CDEs come with an integrated dual-port Ethernet controller. This controller provides an interface for connecting to 0-Mbps, 00-Mbps, or 000-Mbps networks; it provides full-duplex (FDX) capability, which enables simultaneous transmission and reception of data on the Ethernet LAN. To access the Ethernet port, connect a Category,, or unshielded twisted-pair (UTP) cable to the RJ- connector on the back of the device. Note The 00BASE-TX/000BASE-TX Ethernet standard requires that the cabling in the network be Category or higher. Figure B- shows the pin number assignments for the Ethernet RJ- port. Figure B- RJ- Ethernet Port Connector Fiber Connector Type The fiber connector type used to connect to the SE dual-fiber NIC cards is the GLC-SX-MM. B- Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide
5 Appendix B Cable Pin Assignments Cable Pin Assignments Figure B- through Figure B- show the pin assignments for the cable connection for an RS- null modem, RJ- straight-through cable, and RJ- crossover cable, respectively. Figure B-. Pin Assignments for RS- Null Modem TXD RXD GND 9 DB-9 (Female) End view 9 9 DB-9 (Female) End view 9 TO HOST COMPUTER Figure B- Pin Assignments and Wiring for an RJ- Straight-Through Cable White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide B-
6 Cable Pin Assignments Appendix B Figure B- Pin Assignments and Wiring for an RJ- Crossover Cable White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown 9 B- Cisco Content Delivery Engine 0/0/0/0 Hardware Installation Guide
Appendix A Cable Pinouts
Appendix A Cable Pinouts This appendix lists the cables and connector pinout assignments for the cables used with the ERX-7xx models and ERX-14xx models. Topic Page SRP I/O Module 163 CT1 and CE1 I/O Modules
More informationCable Pinouts. SRP I/O Module
Cable Pinouts A This appendix lists the cables and connector pinout assignments for the cables used with the ERX-7xx models and ERX-14xx models. Topic Page SRP I/O Module A-1 CT1 and CE1 I/O Modules A-4
More informationCable Specifications. Interface Specifications. Fiber-Optic Specifications APPENDIXB
APPENDIXB This appendix lists the cable specifications for supported modules on the Cisco 7600 series router. The following signal summaries are contained in this appendix: Interface Specifications, page
More informationConnector and Cable Specifications
APPENDIX B This section describes the Catalyst 4224 Access Gateway Switch ports and the cables and adapters used to connect the switch to other devices. This section includes the following topics: Console
More informationE1 and T1 RJ-48 Cable Pinouts on page 208. Fast Ethernet 12-port Cable Pinouts on page 211
Appendix A This chapter contains tables that list the pinouts for the following cable connectors on the router: RJ-45 Connector Pinouts for the Ethernet Management Port on page 207 DB-9 Connector Pinouts
More informationConnector and Cable Specifications
APPENDIX B This appendix describes the Catalyst 3550 switch ports and the cables and adapters that you use to connect the switch to other devices. Connector Specifications These sections describe the connectors
More informationLab - Building an Ethernet Crossover Cable
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway PC-A NIC 192.168.10.1 255.255.255.0 N/A PC-B NIC 192.168.10.2 255.255.255.0 N/A Part 1: Analyze Ethernet Cabling
More informationIndustrial IP67-rated 4-Port 10/100/1000T at PoE + 2-Port 10/100/1000T. M12 Managed Ethernet Switch. (-40~75 degrees C) IGS-604HPT-M12
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-M12 Quick Installation Guide Table of Contents 1. Package Contents...
More informationIndustrial IP67-rated. 4-Port 10/100/1000T 802.3at PoE. + 2-Port 10/100/1000T. Managed Ethernet Switch (-40~75 degrees C, 24V) IGS MP2MT
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C, 24V) IGS-5227-4MP2MT Quick Installation Guide Table of Contents 1. Package Contents...
More informationConnector and Cable Specifications
APPENDIXB Connector Specifications, page B-1 Cables and Adapters, page B-3 Connector Specifications 10/100 and 10/100/1000 Ports, page B-1 SFP Module Connectors, page B-2 Dual-Purpose Ports, page B-2 Cables
More informationCable and Port Specifications
Send documentation comments to mdsfeedback-doc@cisco.com APPENDIXC This appendix includes the cables and connectors used with the Cisco MDS 9100 Series Fixed Configuration Fabric Switch, and it includes
More informationCable and Port Specifications
APPENDIXC This appendix provides cable and port specifications, and includes the following sections: Cables and Adapters Provided, page C-1 Console Port, page C-2 COM1 Port, page C-3 MGMT 10/100/1000 Ethernet
More informationConnector and Cable Specifications
Connector Specifications, page 1 Console Port, page 3 Cables and Adapters, page 3 Connector Specifications 10/100/1000 Ports (Including PoE) All 10/100/1000 ports use standard RJ-45 connectors and Ethernet
More informationCabling Guide for Console and AUX
Page 1 of 13 Cabling Guide for and AUX Ports TAC Notice: What's Changing on TAC Web Help us help you. Contents Introduction Before You Begin Conventions Prerequisites Components Used Table of Routers with
More informationConnector and Cable Specifications
APPENDIX B This appendix describes the pinouts and cabling requirements for the interfaces and cables used on the Cisco ubr925 cable access router. All connectors for these interfaces are on the rear-panel,
More informationSelect a Data Communication Interface
Printer Setup and Operation Select a Data Communication Interface Select a Data Communication Interface You may connect your print engine to a computer using one or more of the available connections. The
More informationNote: For BANDIT II, BANDIT III, or VSR-1200 specifications, see the BANDIT II, BANDIT III, and VSR-1200 Document Set. Function
Appendix A Specifications This appendix lists the specifications for the BANDIT family of products. Note: For BANDIT II, BANDIT III, or VSR-1200 specifications, see the BANDIT II, BANDIT III, and VSR-1200
More informationSender Receiver Sender
EEE 410 Microprocessors I Spring 04/05 Lecture Notes # 19 Outline of the Lecture Interfacing the Serial Port Basics of Serial Communication Asynchronous Data Communication and Data Framing RS232 and other
More informationCommunication Wiring Color Codes
Communication Wiring Color Codes Cat 5 & 5e Network Color Codes for RJ-45 Ethernet Plug Eight-conductor data cable (Cat 3 or Cat 5) contains 4 pairs of wires. Each pair consists of a solid color wire and
More information> > > > CBG076 CTIC Rev Connect Tech Inc. Pinout Information. Strip 1 cm x30. Hirose DF14-30S-1.25C
Name HIrose Pin +VCC_PNL Strip cm x30 CBG076 CTIC-0096 +VCC_PNL 2 GND 3 GND 4 LVDS_A3_N 5 LVDS_A3_P 6 LVDS_A_CLK_N 7 LVDS_A_CLK_P 8 Hirose DF4-30S-.25C GND 9 LVDS_A2_N 0 LVDS_A2_P LVDS_A_N 2 LVDS_A_P 3
More informationIntroducing the Cisco NAM 2220 Appliance
CHAPTER 1 This chapter provides an introduction to the Cisco NAM 2220 appliance and describes the appliance hardware, major components, and front- and rear-panel LED indicators, controls, and connectors.
More informationJob Aid: Connector and Cable Diagrams (Pinout Charts)
Job Aid: Connector and Cable Diagrams (Pinout Charts) The pinout charts in this document provide wire color and connector pin numbers for: Circuit pack codes and descriptions for all circuit packs (unless
More information-C5RS-LC RS232 EXTENDER
XTENDEX Series ST-C5RS-LC RS232 EXTENDER Installation and Operation Manual ST-C5RS-LC RS232 Extender Man249 Rev. 10/30/17 TRADEMARK XTENDEX is a registered trademark of Network Technologies Inc in the
More informationUSER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix)
USER S MANUAL PH232Ex1 Doc No: PH232Ex1-UM-001 #1 RS-232 Serial Port to Ethernet, Terminal Server/Client IPEX (IP Electronix) Contents 1. INTRODUCTION... 3 2. SPECIFICATIONS... 3 3. PACKAGE CHECKLIST...
More informationSTEP X - Name of Step QUICK START GUIDE SP385A-R3, SP390A-R3 USB TO RS CONVERTER 24/7 TECHNICAL SUPPORT AT OR VISIT BLACKBOX.
STEP X - Name of Step QUICK START GUIDE SP385A-R3, SP390A-R3 USB TO RS CONVERTER 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1 - Package Includes/System Requirements PACKAGE INCLUDES
More informationThe specifications for the Cisco 7304 router are listed in Table A-1.
APPENDIX A This appendix provides system and component specifications for the Cisco 7304 router. The following topics are found in this appendix: System, page A-1 Processor and Memory and Configurations,
More informationCable and Port Specifications
APPENDIXD This appendix provides the cable and port specifications, and includes the following sections: Cables and Adapters Provided, page D-1 Console Port, page D-2 COM1 Port, page D-3 MGMT 10/100/1000
More informationLow Profile Hub. User Manual
16 + 2 Low Profile Hub User Manual 1 Contents One Introduction 2 Two Installation 3 Front Panel Connecting Ports LEDs Three Configuration and Installation Guidelines 5 Hub/Network Configuration Ports and
More informationQuick Start Guide. 2-Port 10/100 Device Server RS-232/422/485 DB9 M. Access two serial RS-232 or RS-422/485 devices over a 10- or 100-Mbps network.
LES302A LES302A-KIT LES302AE-KIT 2-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide Access two serial RS-232 or RS-422/485 devices over a 10- or 100-Mbps network. Customer Support Information
More informationCisco - Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications
Page 1 of 8 Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications Contents Introduction Prerequisites Requirements Components Used Conventions Which Cable Do I Need? Ethernet Cabling Guidelines
More informationModule Connectors and Cable Specifications
Module Connectors, page 1 Cables and Adapters, page 2 Cleaning the Fiber-Optic Connectors, page 6 Module Connectors RJ-45 Connector The RJ-45 connector is used to connect a Category 3, Category 5, Category
More informationINSTALLATION INSTRUCTIONS. DCC and DCE Installation Instructions. Table of Contents
INSTALLATION INSTRUCTIONS MicroComm DXL DCC and DCE Installation Instructions Table of Contents 1. Intent & Scope 1 2. Description 1 3. DCC Backup Battery 2 4. Field Connections to the DCC 4 5. Field Connections
More informationFrame Relay Cabling This section describes the cabling and connector pinouts for the Frame Relay cards.
A P P E N D I X B Cabling Summary Introduction This appendix contains details on the MGX 8850 cabling. Note In all cable references, the transmit direction is away from the switch, and the receive direction
More informationST-C5VRS-600 VIDEO AND RS232 EXTENDER Installation and Operation Manual
NTI R NETWORK TECHNOLOGIES INCORPORATED XTENDEX TM Series ST-C5VRS-600 VIDEO AND RS232 EXTENDER Installation and Operation Manual Manual 039 Rev. 3/13/03 WARRANTY INFORMATION The warranty period on this
More informationAuxiliary Port, Console Port, and Adapter Pinouts for Cisco 1000, 1600, 2500, 2600, and 3600 Series Routers
Auxiliary Port, Port, and Adapter Pinouts for Cisco 1000, 1600, 2500, 2600, and 3600 Series Routers Document ID: 46789 Contents Introduction Prerequisites Requirements Components Used Conventions Auxiliary
More informationQuVIS CONNECTOR PINOUT GUIDE
QuVIS CONNECTOR PINOUT GUIDE The following sections describe the rear panel connector pinouts. Analog Audio/LTC timecode breakout cable AES Digital Audio connector (rear panel) GPI I/O connector RS-422
More informationContents. One Introduction 2. Two Installation 3 Front Panel Connecting Ports LEDs
Contents One Introduction 2 Two Installation 3 Front Panel Connecting Ports LEDs Three Configuration and Installation Guidelines 7 Hub/Network Configuration Ports and Connectors Typical Use for the Megaswitch
More informationMiniature Asynchronous 4-Wire High Speed Modems
ME1862A-F ME1863A-F JULY 2003 ME1862A-M ME1863A-M Miniature Asynchronous 4-Wire High Speed Modems CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
More informationA03 TD/RCL Adapter Board Instruction Sheet Tom Mayo 6/13/2012 COM3 COM1 DB-25 I/O COM2 ETH. Figure 1. The A01 TD220/RCL220 Adapter Board
Introduction This instruction sheet provides information on using the GE MDS 03-6139A01 TD220/ Adapter Board. This adapter board allows access to the special DB-25 pinout of the TD220 and radios with more
More informationHardware Manual. PCMCIA 1 Port RS EDITION APRIL 1999
Hardware Manual 232 232232 PCMCIA 1 Port RS232 1.1 EDITION APRIL 1999 Guarantee. FULL 36 MONTHS GUARANTEE. We guarantee your interface card for a full 36 months from purchase, parts and labour, provided
More informationNM-541-MUX TECHNICAL APENDIX V1.00
NM-541-MUX Five Inputs NMEA Multiplexer TECHNICAL APENDIX V1.00 26, Myrtidiotissis str. Kastella 185-33 Piraeus Greece Tel +30 210 4134628 & +30 210 4134698 Fax +30 210 4134814 Web: http://www.nuovamarea.com
More informationRCS/6000. Hardware. Manual
RCS/6000 Hardware Manual Document number 80-001052-6 Revision A RCS/6000 Hardware Manual Document part number 80-001052-6 Revision History Date Revision Description 4/10/01 A Initial production release
More informationoptical fiber Contribute to by writing a section over one of the following cable types.
7.1 Role The role of the physical layer is to provide the physical connection between two hosts by a medium and to convert a bit stream of data into a transmittable signal. medium copper air or vacuum
More informationHardware Manual PCMCIA DUAL RS EDITION MAY 1999
Hardware Manual 232 232232 PCMCIA DUAL RS232 1.4 EDITION MAY 1999 Guarantee. FULL 36 MONTHS GUARANTEE. We guarantee your interface card for a full 36 months from purchase, parts and labour, provided it
More informationContents. One Introduction 2. Two Installation 3 Front Panel 10base-T Ports 10/100base-TX Ports LEDs
Contents One Introduction 2 Two Installation 3 Front Panel 10base-T Ports 10/100base-TX Ports LEDs Three Configuration and Installation Guidelines 7 Hub/Network Configuration Ports and Connectors Typical
More informationIndustrial 8-Port 10/100TX 802.3at PoE+ + 2-Port Gigabit TP/SFP Combo Ethernet Switch IFGS-1022HPT. User s Manual
Industrial 8-Port 10/100TX 802.3at PoE+ + 2-Port Gigabit TP/SFP Combo Ethernet Switch IFGS-1022HPT User s Manual Table of Contents 1. Package Contents... 3 2. Hardware Introduction... 4 2.1 Physical Dimensions...
More informationEZL-200F Application Notes (003) Serial Interface (RS232/RS422/RS485)
Application Notes (003) Serial Interface (RS232/RS422/RS485) Version 2.0 Sollae Systems Co., Ltd. 1. Overview supports three serial interfaces: RS232, RS422, and RS485. You can select the interface you
More informationWrenchman, Inc Old Hwy. # 8 Suite # 122 New Brighton, Minnesota (651)
Wrenchman, Inc. 1801 Old Hwy. # 8 Suite # 122 New Brighton, Minnesota 55112 (651) 638-9012 468X Interface Cable Specifications The Interface Cable emulates the Async RS-232 logical interface supported
More informationMIU-1000 v. Revised: 4/20/2009. Copyright 2008, Traf-SYS, Inc.
MIU-1000 v 2.6g Revised: 4/20/2009 Copyright 2008, Traf-SYS, Inc. Contents Introduction... 3 Setting up your MIU-1000 for the first time... 3 Connections... 3 Connecting with a Serial Cable... 3 Connecting
More informationEthernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 12
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables Cable Spools Unshielded Twisted
More informationUSER MANUAL MODEL 2017P MODEL 2017P60. RS-232 to 20mA and. RS-232 to 60mA Current Loop Converters
USER MANUAL MODEL 2017P RS-232 to 20mA and MODEL 2017P60 RS-232 to 60mA Current Loop Converters 07M2017P-E Doc# 073051UE Revised 5/7/96 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 1.0
More informationD-Series Serial Bus System
D-Series Serial Bus System DeviceNet TM and MODBUS TCP User Manual 602 ROSS CONTROLS ROSS CONTROLS ROSS CONTROLS Table of Contents Important User Information... 3 Configuration Assembly of Hardware Components...
More informationoptical fiber The two tasks of the network-access-layer are divided into two different layers in the OSImodel.
10.1 Network-Access-Layer (TCP-IP-model) Already in chapter 2 we have seen that the network-access-layer builds a SDU so called frame. The header of this frame contains amongst other information the destination
More informationSerial Interfaces Part 1. ECE 153B Sensor & Peripheral Interface Design Winter 2016
Serial Interfaces Part 1 ECE 153B Sensor & Peripheral Interface Design Serial Interfaces Simple Serial Interfaces RS-232C (UART) Provides for point to point communications, primarily Among the simplest
More informationInstallation Manual. Table of Contents
Table of Contents Table of Contents... 4-1 4.1 Confirming the Installation Preparations... 4-1 4.2 Installation Flowchart... 4-1 4.3 Mounting the Switch to the Designated Position... 4-2 4.3.1 Mounting
More informationNetCom Mini. SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control
Features Can control 1 x RS232 device located virtually anywhere (via Ethernet or Internet) LAN interface 10BaseT/100BaseTx Ethernet Configuration utility automatically finds NetCom Mini devices in the
More informationPoE vs. Splitters, Y Cables, Non IEEE Power Injectors, and Misconnections
PoE vs. Splitters, Y Cables, Non IEEE Power Injectors, and Misconnections 2 Supporters David Tremblay (HP) Lennart Yseboodt (Philips) Matthias Wendt (Philips) Musa Unmehopa (Philips) Gaoling Zou (MAXIM)
More informationStarter Guide Version Sphinx Access Control System
TC3XYMT/TC3XYNT Starter Guide Version 1.04.1 Sphinx Access Control System Page 1 1. Controller and Reader wiring...3 2. Connect the controller to PC...4 2.1. Setup the ID of Controller...4 2.2. Connect
More informationGPORT104 User s Manual
GPORT104 User s Manual Beijing Golden Global View Co., Ltd. RAYON Technology Co., Ltd. Version( V 1.01) Contents I. Product Introduction II. Features III. Technical Specifications IV. Hardware Installation
More informationETH-4X1-G / 2X1-G / 2X1
VIDEO 1275 Danner Drive Aurora,Ohio 44202 PRODUCTS Tel: 1-800-626-7801 Fax: 330-562-1999 www.vpi.us INCORPORATED ETH-4X1-G / 2X1-G / 2X1 Manual Ethernet Switch Installation and Operation Manual MAN048
More informationI/O Interface DNA300
DNA300 OPERATIONS MANUAL 1 Ring Communications, Inc. Crisis Alert System I/O Interface DNA300 2 DNA300 OPERATIONS MANUAL 2006/06/13 DNA300 OPERATIONS MANUAL 3 Contents INTRODUCTION... 5 INSTALLATION...
More informationIndustrial IP67-rated 4-Port 10/100/1000T at PoE + 2-Port 10/100/1000T. Managed Ethernet Switch. (-40~75 degrees C) IGS-604HPT-RJ
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-RJ Quick Installation Guide Table of Contents 1. Package Contents... 3
More informationNPort S8000 Series Quick Installation Guide
NPort S8000 Series Quick Installation Guide Edition 6.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationDB9 Microdriver CUSTOMER SUPPORT INFORMATION JULY 1994 ME792A ME793A ME794A
JULY 1994 ME792A ME793A ME794A DB9 Microdriver Microdriver S/N CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support,
More informationHardware Reference. with DIL/NetPC ADNP/9200. Remote Access Gateway IGW/922
Remote Access Gateway IGW/922 with DIL/NetPC ADNP/9200 Hardware Reference SSV Embedded Systems Dünenweg 5 D-30419 Hannover Phone: +49 (0)511/40 000-0 Fax: +49 (0)511/40 000-40 E-mail: sales@ssv-embedded.de
More informationProduct Manual. USB to Optical Adapter Industrial Isolated RS- 232/422/485. Coolgear, Inc. Version 2.1 December 2018 Model Number: USB-COMi-Si-M
USB to Optical Adapter Industrial Isolated RS- 232/422/485 Product Manual Coolgear, Inc. Version 2.1 December 2018 Model Number: USB-COMi-Si-M 2 USB-COMi-SI-M Product Manual Revision History Revision Date
More information5/8-Port 10/100/1000Mbps. Industrial Gigabit Ethernet Switch IGS-501 / IGS-801 / IGS-501T / IGS-801T. User's Manual
5/8-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch IGS-501 / IGS-801 / IGS-501T / IGS-801T User's Manual Trademarks Copyright PLANET Technology Corp. 2009. Contents subject to revision without
More informationModel:UT-8814 USB/RS-232 Commercial interface converter. Instruction Manual
Model:UT-8814 USB/RS-232 Commercial interface converter Instruction Manual Contents 1. Overview....3 2. Main Features...3 3. Hardware installation and application....3 4. Performance parameters... 4 5.
More informationEDR-G902/G903 Quick Installation Guide
EDR-G902/G903 Quick Installation Guide Moxa EtherDevice Router Edition 4.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationRS-232 SERIAL INTERFACE PHOTOELECTRIC ISOLATOR
RS-232 SERIAL INTERFACE PHOTOELECTRIC ISOLATOR User Manual DA-70163 I. Summary With adoption of advanced photoelectric isolation technology, RS-232 Serial Interface Photoelectric Isolator, also named Serial
More informationSunSpec Reference Architecture SunSpec CEA 2045 Inverter Adaptor
SunSpec Reference Architecture SunSpec CEA 045 Inverter Adaptor December 04 Overview ² This reference design illustrates how a CEA 045 module adaptor box system can be constructed using off-the-shelf parts.
More informationInstallation and Operation Manual. Ethernet Interface for SIMREX Radio Modems. SIMREX P/N: MAN.UBRIDGE Rev. B APRIL 2005
Installation and Operation Manual SIMREX Corporation ubridge Ethernet Interface for SIMREX Radio Modems SIMREX P/N: MAN.UBRIDGE Rev. B APRIL 2005 SIMREX CORPORATION Your Trusted Wireless Solution Provider
More informationHow to connect. Go to Tools / Options / Port Settings (in PlusConfig software) and change the COM port to COM 3. Minelec PlusConfig How to connect
How to connect PlusConfig How to connect with the Luxom system There are 3 different ways of connecting your computer to the Luxom system: - LOCAL - IP - MODEM LOCAL This means that we use a Luxom serial
More information100/1000BASE-X to 10/100/1000BASE-T at PoE Media Converter. GTP-805A User s Manual
100/1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter GTP-805A User s Manual Trademarks Copyright PLANET Technology Corp. 2018. Contents are subject to revision without prior notice. PLANET is
More informationSitePORTAL Lite TA-SPL32-R48
SitePORTAL Lite TA-SPL32-R48 Quick Connect Guide The TA-SPL32-R48 is a 19 inch, 2 RU rack mountable siteportal Lite (spl). It comes with 8 analog inputs, 8 temperature inputs (sensors sold separately),
More informationRS 232 to Fibre Optic Modems ELO E240, ELO E241, ELO E242. Operation manual
RS 232 to Fibre Optic Modems ELO E240, ELO E241, ELO E242 Operation manual 1.0 Introduction...3 1.1 Use of the modem...3 2.0 Operation principles...3 3.0 Installation...3 3.1 RS-232 Interface Connection...4
More informationICD200A Quick Start Guide. Convert RS-232 data signals to RS-422/485 signals in heavy industrial areas.
Industrial Opto-Isolated RS-232 to RS-422/485 Converter Convert RS-232 data signals to RS-422/485 signals in heavy industrial areas. Rugged IP30-rated metal case for panel mounting. Quick Start Guide Customer
More informationIES615-2D Series. Industrial Ethernet Switch. User Manual. Summarize. Panel layout. Packing list. Features. Shenzhen 3onedata Technology Co., Ltd.
Features Summarize Packing list Panel layout IES615-2D Series Industrial Ethernet Switch User Manual Shenzhen 3onedata Technology Co., Ltd. Tel: +86-755-26702668 Fax: +86-755-26703485 www.3onedata.com
More informationVMI. Technical Documentation. 600 Industrial Drive, New Bern, N.C (tel / fax /
VMI E-Series Virtual Mixer Interface Technical Documentation 600 Industrial Drive, New Bern, N.C. 28562 (tel 252-638-7000 / fax 252-637-1285 / email@wheatstone.com ) VMI E-Series Virtual Mixer Interface
More informationNPort 6600 Series Quick Installation Guide
NPort 6600 Series Quick Installation Guide Edition 10.0, November 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More information2-Port Wireless Access Controller EWS4502. Installation Guide.
2-Port Wireless Access Controller EWS4502 Installation Guide www.edge-core.com Installation Guide EWS4502 Wireless Access Controller with 2 000BASE-T (RJ-45) Ports, E06203-CS-R0 4900000238A How to use
More informationIML 560 USER GUIDE. Low Power 56Kbps Industrial modem. Version 1.2. December 6, AYANTRA Inc.
IML 560 USER GUIDE Low Power 56Kbps Industrial modem Version 1.2 December 6, 2002 AYANTRA Inc. Revision History Date Version Description By November 18, 2002 1.1 Initial Release - December 6, 2002 1.2
More informationSmart CAT5 Switch 16 IP Installation Guide
Smart CAT5 Switch 16 IP Installation Guide International HQ Jerusalem, Israel Tel: + 972 2 535 9666 minicom@minicom.com North American HQ Linden, New Jersey Tel: + 1 908 4862100 info.usa@minicom.com European
More informationUSER MANUAL. MODEL 2011 High Speed Asynchronous to Synchronous Converter
USER MANUAL MODEL 011 High Speed Asynchronous to Synchronous Converter Part# 07M011-A Doc# 0601UA Revised 03/16/94 SALES ICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com 1.0 WARRANTY
More informationLantech I(P)GS-0008B. 8 10/100/1000T (PoE at/af) Industrial Unmanaged Ethernet Switch I(P)ES-0008B
Lantech I(P)GS-0008B 8 10/100/1000T (PoE at/af) Industrial Unmanaged Ethernet Switch I(P)ES-0008B 8 10/100TX (PoE at/af) Industrial Unmanaged Ethernet Switch User Manual V1.11 Jan-2018 Recommendation for
More informationEXTENDER 6000 / 7000 CABLES & CONNECTORS
EXTENDER 6000 / 7000 CABLES & CONNECTORS This document outlines the cables required for the installation of the Citel EXTenders (6000, 7000) 1 CABLE: 9 M-F Straight Through Serial Cable, All pins straight
More information3.1 I-7560 Pin Assignment and Specifications: Introduction
3.1 I-7560 Pin Assignment and Specifications: Introduction The I-7560 adds a Windows serial Com port via its USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows
More informationChapter 11: Input/Output Organisation. Lesson 05: Asynchronous RS232C Serial Port data transfer
Chapter 11: Input/Output Organisation Lesson 05: Asynchronous RS232C Serial Port data transfer Objective Understand the RS232C asynchronous data transfer and signals Learn the RS232C serial port communication
More informationConfiguring a Comm/Terminal Server for Sun Console Access
Configuring a Comm/Terminal Server for Sun Console Access Document ID: 9588 Contents Introduction Prerequisites Requirements Components Used Conventions Set Up for Console Access to the Sun Server Adapters
More informationBeagleBone Black USB Expansion RS232 Module Cape Coolgear, Inc. Version 1.1 September 2017 Model Number:
BeagleBone Black USB Expansion RS232 Module Cape Product Manual Coolgear, Inc. Version 1.1 September 2017 Model Number: USB-2COM-BB 2 USB-2COM-BB Product Manual Revision History Revision Date Author Comments
More informationDigital Sonic Anemometer Cables and. the SmartFlux 2 and 3 Systems.
Digital Sonic Anemometer Cables and the SmartFlux 2 and 3 Systems Installation Guide The cables described here are used to connect the Gill WindMaster, WindMaster Pro, HS-50, Campbell Scientific CSAT3,
More information7I74 MANUAL 8 CHANNEL RS-422 INTERFACE
7I74 MANUAL 8 CHANNEL RS-422 INTERFACE V1.2 This page intentionally almost blank Table of Contents GENERAL.......................................................... 1 DESCRIPTION.................................................
More informationLantech. IPGS-0005T /100/1000T PoE at T Industrial Unmanaged Switch. User Manual
Lantech IPGS-0005T-4 4 10/100/1000T PoE at + 1 1000T Industrial Unmanaged Switch User Manual V1.00 Jan-2018 Content Overview... 1 Introduction... 1 Features / Model List... 2 Packing List... 3 Safety Precaution...
More informationRS-232 Fiber Link Card System
USER GUIDE The leader in rugged fiber optic technology. U-152 2018B-0406 Fiber Link Card System SYSTEM INSTALLATION INFORMATION Introduction The Fiber Link Card system transports a full 9-Pin copper signal
More informationDeviceMaster RTS 16-Port Hardware Installation
DeviceMaster RTS -Port Hardware Installation Red underscored text link to Internet URLs. Blue underscored text link to sections within this document or to another document in the library. Note: If you
More informationBuilding the Communication Cable
uilding the Communication Cable 99 uilding the Communication Cable There are several considerations that help determine the type of cable needed for your application. 1. Will the be physically connected
More informationInstallation and Operation Manual
Installation and Operation Manual ET1100C Series Ethernet Extender Series Microtype10/100BASE-TX Ethernet Extender over Coaxial Cable OT Systems Ltd., 2014 Rev 1.1 www.ot-systems.com 1 Models covered in
More informationCisco ASR 1001-X Router Specifications
Cisco ASR 00-X Router Specifications This appendix provides the Cisco ASR 00-X Router specifications. Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router,
More informationBLE232: Manual Copyright 2014 taskit GmbH
BLE232 Manual BLE232: Manual Copyright 2014 taskit GmbH BLE232 All rights to this documentation and to the product(s) described herein are reserved by taskit GmbH. This document was written with care,
More informationOverview. Port Adapter Overview CHAPTER
CHAPTER This chapter describes the PA-H port adapter and contains the following sections: Port Adapter, page - Interface Specifications, page - LEDs, page - Cables, Connectors, and Pinouts, page - Port
More information