HYPERION Ports - Managed Industrial Ethernet Switch 2x 100M/1000M/2.5G SFP 24x 10M/100M/1G RJ45 PoE PoE++ Environmental limits.

Transcription

1 26 Ports - Managed Industrial Ethernet Switch 2x 100M/1000M/2.5G SFP 24x 10M/100M/1G RJ45 PoE PoE++ Industrial switch with 2x SFP 100/1000M/2.5Gbps, 24x RJ45 10/100/1000Mbps, (only one SFP) and additional interfaces measurement and control PoE PoE++ (oprtional) support up to 90W (all ports max. 250/360W), Watchdog PoE 'ITU-T G.8032' Ethernet ring support, up to 20ms protection and recovery switching IEEE v.2 (PTPv2): precise time synchronization, hardware support for timestamping; precise time synchronization for real-time applications Hardware support for Synchronous Ethernet Energy Efficient Ethernet (EEE) support Control and measurement functions: 3x RS232/485 virtual-com, 1-Wire (T/H), 1x digital input, 4x relay outputs PROFINET Conformance Class A Radius centralized password management Ethernet OAM (Link and Service OAM) support Security: SNMPv3, Https, SSH management -40 to +70 C operating temperature IP-30 DIN mounted metal enclosure Redundant power supply 230V AC and 48V DC Transmission Environmental limits is Managed Industrial Ethernet Switch equipped with eight 10/100/1000Mbps RJ45 (with PoE+ support) and 100M/1G/2.5G SFP ports and additional interfaces measurement and control. It is dedicated to provide the transmission of applications, supervision and operation of power stations, CCTV and other applications for the industry. Switch was designed to operate in temperature range from -40 to 70 C. Solid IP-30 metal enclosures stable operation in heavy environment. can be mounted on a standard DIN rail. Redundant power supply provides stable and continuous operation in case of one power supply failing. Network resiliency switch supports Ethernet Ring Protection Switching according to the ITU-T G.8032 standard, providing up to 20ms protection and recovery switching for Ethernet traffic in ring topologies. Standard resiliency spanning tree protocols like STP, RSTP, MSTP are also supported to ensure system reliability. device supports Energy Efficient Ethernet functionality (IEEE 802.3az) allowing for less power consumption by putting Ethernet ports into "sleep" mode during periods of low data activity and adjusting the power accordingly to Ethernet cable length. v004, str. 1/6

2 Network Performance Management supports IEEE 1588v.2 Precision Time Protocol to provide precise time synchronization for applications with restrictive realtime requirements. Ethernet transmission channel may be set as transparent or divided into independent transmission channels through the virtual VLAN mechanism. Device supports advanced Ethernet interface features like VLAN stacking (QinQ, IEEE802.1ad), private VLANs, LACP links aggregation, jumbo frame size, programmable rate limiting and port priority setting. Moreover despite typical 1Gbit/s SFP modules HYPERION PoE switches can be connected using 2.5Gbit/s optical modules. Device supports Ethernet OAM features (Link OAM and Service OAM), providing effective fault management and performance monitoring (remote loopbacks, continuity checks using CFM messages, performance monitoring measurements such as frame loss ratio, frame delay and frame delay variation). Embedded HTTPs server, SSH server and SNMPv3 agent allow free configuration of the device performance by standard Web browser and continuous monitoring from any management platforms equipped with SNMP client. In addition SSH and SNMPv3 provide secure communication with remote devices using encrypted messages. Remote software update is supported to allow further functionality improving. Applications switch can be used to provide reliable connections between SCADA system and network controllers, to create IP CCTV monitoring systems, to provide communication for wind farms, to monitor environmental parameters in harsh environment, to realize smart grid applications and in many others industrial applications. The sample application, illustrating the connection of peripheral systems to measure the detectors or measuring environmental parameters in power stations unattended v004, str. 2/6

3 Supported transmission standards IEEE Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3u 100Base-FX Fast Ethernet Fiber IEEE 802.3ab 1000Base-T IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control and Back-pressure IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1p Class of Service (CoS) IEEE 802.1Q VLAN IEEE 802.1ad QinQ IEEE 802.1D- Spanning Tree Protocol (STP) IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad Link Aggregation Protocol (LACP) IEEE 802.1x Port Based Network Access Protocol IEEE 802.3az EEE IEEE 802.3af/at type 1/2 and PoE++ up to 90W/port (all ports max. 250W) EEE1588v2 and Synchronous Ethernet Radius centralized password management Supported protocols IGMP v1,v2,v3, MLD v1, v2, GMRP, GVRP, SNMP v1/v2c/v3, DHCP Client, NTP, SMTP, RMON, HTTP, HTTPS, Telnet, SSH v2, Syslog, EtherNet/IP, SNMP Inform, LLDP, IEEE1588 PTP v2, Ipv6, NTP Client, MIB-II, Ethernet-Like MIB Supported standards, recommendations and directives EMC Security* PN-EN 55011:2012 PN-EN 55024:2011/A1: PN-EN :2007/A2: EMC 2004/108/WE LVD 2006/95/WE PN-EN : IEC Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test IEC Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test IEC Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test IEC Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test IEC Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields IEC Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques Power frequency magnetic field immunity test IEC Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests IEC Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques Ring wave immunity test IEC Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests list of supported standards may vary with the development of the device v004, str. 3/6

4 Ethernet interface Ethernet: 24x RJ45 10/100/1000 Mbps, 2x 100M/1000M/2.5Gbps SFP (range of up to 200km for 100Mbit/s 100BASE-FX) QoS: Weighted Round Robin, Strict Priority. PCP 802.1p, DSCP/ToS, VLAN: 4096, 802.1Q, 802.1QinQ, private VLAN Broadcast, Multicast, Unknown DA RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2 Management IEEE 802.3az: Energy Efficient Ethernet Port Trunk: IEEE 802.3ad LACP MAC: 8192 Security : HTTP/HTTPS, SSL/SSH Network redundancy: - ITU-T G.8032 Ethernet Ring (ERPS) - IEEE 802.1D Spanning Tree (STP) - IEEE 802.1D-2005 Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Physical design SNMP v1/v2c/v3, SSH Console (using USB port) Http/Https protocol and web browser as a management application Power supply Port Mirroring Power supply 36-60V DC (50W without PoE) Power supply: V AC (50W without PoE) Two power supply inputs, redundant Dimensions 434x43x184mm Weight 3kg DIN rail mounting IP 30 rated metal enclosure Operating temperature: -40 to 70 C Operating humidity (non condensing): 5%-95% view - front v004, str. 4/6

5 HYPERION-40X-Y-(Z)-U Versions: 1 24x RJ45(10M/100M/1G) + 1x SFP (100M/1G) + 1x SFP (100M/1G/2.5G) Additional interfaces: 1 basic version PoE optional versions: S8P 8x PoE+ PSE S8P2 8x PoE++ PSE S16P2 16x PoE++ PSE S24P2 24x PoE++ PSE Power supply: 71p - redundant power 36-72V DC, 230V AC/ 220V DC witch PoE++ for 230 V AC/ 220V DC all ports max. 250W 77p - redundant power 36-72V DC PoE (max. 15W) 45-57V PoE+ (max. 30W) 52-57V PoE++ (max. 90W) 55-57V for 55V all ports max. 360W Examples of code: HYPERION p HYPERION S8P-77p HYPERION S24P2-71p Hyperion-401, 24xRJ45, 2xSFP, 36-72V DC and 230V AC Hyperion-401, 24xRJ45, 2xSFP, 2x36-72V DC, 8x PoE+ Hyperion-401, 24xRJ45, 2xSFP, 2x36-72V DC, 24x PoE++ ORDERING: BTPB-8524-S5TD BTPB-3124-L2TD BTPB-3124-L4TD BTPB-5524-L4TD BTPB-5524-L8TD BTPB TD 1.25G, 850nm, MM, 550m, SFP, LC, -40~85OC, (support 100M) 1.25G, 1310nm, MM/SM, 2/20km, SFP, LC, -40~85OC, (support 100M) 1.25G, 1310nm, SM, 40km, SFP, LC, -40~85OC, (support 100M) 1.25G, 1550nm, SM, 40km, SFP, LC, -40~85OC, (support 100M) 1.25G, 1550nm, SM, 80km, SFP, LC, -40~85OC, (support 100M) 1.25G, 1550nm, SM, 120km, SFP, LC, -40~85OC, (support 100M) BTP-3131-L2TD BTP-3131-L4TD BTP-3131-L8TD BTP-3131-L12TD 1.25G-3.125G, 1310nm, SM, 20km, SFP, LC, -40~85OC 1.25G-3.125G, 1550nm, SM, 40km, SFP, LC, -40~85OC 1.25G-3.125G, 1550nm, SM, 80km, SFP, LC, -40~85OC 1.25G-3.125G, 1550nm, SM, 120km, SFP, LC, -40~85OC BTPB-3524L-L2TD BTPB-5324L-L2TD BTPB-3524S-L2TD BTPB-5324S-L2TD 1.25G, 1310/1550nm, SM, 20km, SFP, WDM, LC, -40~85 OC, (support 100M) 1.25G, 1550/1310nm, SM, 20km, SFP, WDM, LC, -40~85 OC, (support 100M) 1.25G, 1310/1550nm, SM, 20km, SFP, WDM, SC, -40~85 OC, (support 100M) 1.25G, 1550/1310nm, SM, 20km, SFP, WDN, SC, -40~85 OC, (support 100M) v004, str. 5/6

6 BTPB-3524L-L4TD BTPB-5324L-L4TD BTPB-3524S-L4TD BTPB-5324S-L4TD 1.25G, 1310/1550nm, SM, 40km, SFP, WDM, LC, -40~85 OC, (support 100M) 1.25G, 1550/1310nm, SM, 40km, SFP, WDM, LC, -40~85 OC, (support 100M) 1.25G, 1310/1550nm, SM, 40km, SFP, WDM, SC, -40~85 OC, (support 100M) 1.25G, 1550/1310nm, SM, 40km, SFP, WDM, SC, -40~85 OC, (support 100M) BTPB-3531L-L2TD BTPB-5331L-L2TD BTPB-3531S-L2TD BTPB-5331S-L2TD 1.25G G, 1310/1550nm, SM, 20km, SFP, WDM, LC, -40~85 OC 1.25G G, 1550/1310nm, SM, 20km, SFP, WDM, LC, -40~85 OC 1.25G G, 1310/1550nm, SM, 20km, SFP, WDM, SC, -40~85 OC 1.25G G, 1550/1310nm, SM, 20km, SFP, WDM, SC, -40~85 OC BTPB-3531L-L4TD BTPB-5331L-L4TD BTPB-3531S-L4TD BTPB-5331S-L4TD 1.25G G, 1310/1550nm, SM, 40km, SFP, WDM, LC, -40~85 OC 1.25G G, 1550/1310nm, SM, 40km, SFP, WDM, LC, -40~85 OC 1.25G G, 1310/1550nm, SM, 40km, SFP, WDM, SC, -40~85 OC 1.25G G, 1550/1310nm, SM, 40km, SFP, WDM, SC, -40~85 OC BTP TD BTP-3103-L2TD BTP-3103-L4TD BTP-5503-L8TD BTP TD 155M, 850nm, MM, 2km, SFP, LC, -40~85OC 155M, 1310nm, MM/SM, 2/20km, SFP, LC, -40~85OC 155M, 1310nm, SM, 40km, SFP, LC, -40~85OC 155M, 1310nm, SM, 80km, SFP, LC, -40~85OC 155M, 1310nm, SM, 120km, SFP, LC, -40~85OC BTPB-3524L-L2TD BTPB-5324L-L2TD BTPB-3524S-L2TD BTPB-5324S-L2TD 155M, 1310/1550nm, SM, 20km, SFP, WDM, LC, -40~85 OC 155M, 1550/1310nm, SM, 20km, SFP, WDM, LC, -40~85 OC 155M, 1310/1550nm, SM, 20km, SFP, WDM, SC, -40~85 OC 155M, 1550/1310nm, SM, 20km, SFP, WDN, SC, -40~85 OC BTPB-3503L-L4CD BTPB-5303L-L4CD BTPB-3503S-L4CD BTPB-5303S-L4CD 155M, 1310/1550nm, SM, 40km, SFP, WDM, LC, -40~85 OC 155M, 1550/1310nm, SM, 40km, SFP, WDM, LC, -40~85 OC 155M, 1310/1550nm, SM, 40km, SFP, WDM, SC, -40~85 OC 155M, 1550/1310nm, SM, 40km, SFP, WDM, SC, -40~85 OC BTE-GB-P1RT BTE-GB-P3RT 10/100/1000M, 100m(UTP-5), Copper SFP, RJ-45, -40~85 OC 1000M, 100m(UTP-5), Copper SFP, RJ-45, -40~85OC ZAS-ANYMUX-03 Power supply VAC, VDC / 48-56VDC; 40W for C, 24W for60+70c, 2x PoE; DIN rail mounting, 0.5kg.; 40*90*100mm (WxSxG) ZAS-ANYMUX V Power supply VAC, VDC / 48-55VDC; 240W for C, 180W for C, 11x PoE, 5x PoE+, 1x PoE++ DIN rail mounting, 1kg. 63*125.2*113.5mm (WxSxG) ZAS-ANYMUX-09 Power supply VAC, VDC / 48-53VDC; 240W for C, 144W for C, 9x PoE, DIN rail mounting, 1.2kg *125.2*100mm (WxSxG) ZAS-ANYMUX-10 Power supply VAC, VDC / 47-56VDC, 480W for C, 312W for C, 20x PoE, 9x PoE+, 3x PoE++; DIN rail mounting, 2kg. 142x175x116mm (WxSxG) ZAS-ANYMUX-11 Zasilacz VAC, VDC / 47-56VDC, 240W for C, 180W for C, 11x PoE, 5xPoE+, 1x PoE++, DIN rail mounting, 1.5kg.; 83*142*111.3mm (WxSxG) v004, str. 6/6