WM-100GX-N+7-NGS. extreme Power 11n 2.4Ghz 1x1 Wall PoE Access Point,7dBi Antenna with CenOS4.0 (800mW) Bundles CenOS 4.

Transcription

1 WM-100GX-N+7-NGS extreme Power 11n 2.4Ghz 1 Wall PoE Access Point,7dBi Antenna with CenOS4.0 (800mW) EAN Code : Bundles CenOS 4.0 Software Core The WM-100GX-N+7-NGS extreme Power 11n 2.4Ghz 1 Wall PoE Access Point hardware utilizes 800mW extreme power with a plastic housing and 1 external 7dBi Omni directional antenna. CenOS4.0 software supports 3 operational modes: the (AAP) Authentication AP Mode, (TAP) Thin AP Mode, and (CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point. Improved safety precautions needed for enterprises can be achieved through a combination of Radius Servers, SSL, and AAP authentication. For application in hotels, shopping malls, restaurants, and other public places, the increased utility of Guest portals allows administrators to control guest stratification (SSID), customize bandwidth usage, and also set time limitations for specific users. By integrating OAuth2.0, guests can also gain authorization and access through platforms such as Facebook and Google+. CERIO s new WM-100GX-N+7-NGS CenOS 4.0 Software package includes Guest Portal capability that allow for more network security and efficiency, improved customer experience, easier user management, and provides a platform for high class businesses to raise brand awareness. The Guest Portal login page is extremely effective in advertising and projecting brand image, a feature very useful to large companies and small businesses. Power users wishing to change their mentality should adopt Cerio s new CenOS4.0 software, boosting transmission rates through unhindered AAP Guest Portal authentication (AAP Mode) login. We at Cerio aim to bring consumers into the new era of Wifi performance and security. 1

2 WM-100GX-N+7-NGS extreme Power 11n 2.4Ghz 1 with SMA 7dBi Thin Type Antenna Wall PoE Access Point is an easy-to-install and cost-effective solution for most of indoor wireless deployments. The high class access point is perfect for application in areas such as: hotels, offices, and Luxurious houses. The WM-100GX-N+7-NGS effectively works to extend the range and increase the performance of a wireless network. The WM-100GX-N+7-NGS provides a RJ-45 wired connection as well as both Wi-Fi wireless connection and RJ11 Pass-through functionality. Equipped with a network administrator can centrally manage the WM-100GX-N+7-NGS via a Web browser and SNMP MIB browser & VLAN tag. Included PoE, power and data are supplied to the unit using CAT5 Ethernet cable. It can be powered via PoE switch or PoE Injector when available. The Software Bundle: CenOS 4.0 Introduction CERIO s NGS Firmware uses the CenOS4.0 core. The firmware s main functions are web login authentication and Thin Access Point (TAP) modes. CERIO s CenOS 4.0 Access Point uses hotspot technology importing concepts. Main functions include authentication login support remote RADIUS Server, local user account, OAuth2.0 account and guest login in AAP mode. Cerio s (Thin AP) wireless base station TAP function supports only GUI state monitor displays when acting as a Thin Access Point. Once this setting is operational, the device ends all NGS centralized control and management functions and operates strictly under the control and management of other supervising systems such as an AP utilizing CAP (Controller Access Point) mode. The thin AP deployment architecture acts to effectively improve network efficiency, and reduce security concerns of information theft from wired/wireless invades. Because no settings are stored in a Thin AP, device theft or invader intrusion would pose no threat to the networks security. Controller Access Point (CAP)- AP manager Administrators should use CAP mode to simultaneously managed APs of AAP and TAP mode. Centralized APs management enables control of Wi-Fi function / security / users authentication / firmware upgrade / system time / traffic monitoring / and system information. TAP mode supports GUI status monitoring, allowing administrators to facilitate audit APs. CERIO s NGS Firmware also supports load balance management through TAP mode (Real-time user limitation). 2

3 The firmware provides Traffic Monitoring and Graphical GUI Status Interface. Administrators can easily monitor system statuses and network traffic for each AP. WM-100GX-N+7-NGS CenOS 4.0 Software key Features Operation Modes : (AAP) Authentication AP Mode, (TAP) Thin AP Mode, (CAP) Control AP Mode Provide customizable login and logout portal page by Web Page Each Virtual ESSID supports 10 local built-in local accounts, Supports 10 local accounts x 8 virtual ESSID for a total of 80 local accounts. And supports external RADIUS server, and OAuth2.0 Facebook / Google accounts Provides customizable Login redirect URL and Login URL web links 3

4 Supports wireless IGMP the v1/v2/v3 function, may pass on in the wire the immediate video and music wrapped gift Supports Control AP Group Management, Supports up to 16 access points Centralized Control Management of Wired and Wireless Devices in CAP Control AP AP Group Management- maintain a set of setting templates that simplify the task of assigning the same settings to multiple Aps Multi Language SSID and 8 Multiple-ESSID support, And Support IEEE802.11f IAPP QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the maximum Bandwidth Upload/Download speed limit of each network user Auto Channel Scan and support Scan other AP site survey Single information Support Hardware chipset base Watch Time Dog, The OS will be reboot by automatically before crash Software UI support Auto reboot setting function, Can by Hour/Daily/Weekly to setting software Auto Reboot Bundles Cerio CenOS 4.0 software Core interface allows for communicating with Cerio Wireless NGS CAP ( CAP Mode ) AP Management system or NGS-1000 X86 base Access Controller hardware device of network management servers Enable and Disable to control blinking of the devices LED lights SupportsIEEE802.1d Spanning Tree Support HTTP/HTTPS, CLI via Telnet and the SSH interface Provides Traffic Monitor and Graphical GUI Status Interface 4

5 WM-100GX-N+7-NGS CenOS 4.0 Operation Mode Applications WM-100GX-N+7-NGS extreme Power 11n 2.4Ghz 1 Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point. (AAP) Authentication AP Mode The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0 (TAP) Thin AP Mode Use CenOS 4.0 CAP Mode to Control devices utilizing TAP mode 5

6 (CAP) Control AP Mode CAP Mode allows for Simultaneous Management of APs operating in AAP and TAP Mode WM-100GX-N+7-NGS CenOS 4.0 Software Specifications Support Wireless Access Controller CERIO CenOS 4.0 Access Point provides authentication and authorization for a wireless networks. Administrator can select CAP (Control Access Point) mode to centralize management of network APs. Centralized APs Management of CAP Mode AP Group management maintain a set of setting templates that simplify the task to assign the same setting to multiple APs AP-Automatic configuration and provisioning by CAP mode. Locally maintained configuration profiles for managed APs. Auto discovery managed APs for TAP/AAP mode. Central firmware Upgrade-Select multiple APs and upgrade their firmware at the same time Remote Firmware upgrade by TFTP and HTTP. 6

7 Managed APs Monitoring Monitor APs for traffic and system information. The number of associated clients to the APs. Support Location Map Management. Thin APs of TAP Mode When devices operates in TAP (Thin AP) mode, other operation functions are disabled and the Thin AP device must be controlled and managed by other devices such as a NGS CenOS 4.0 CAP mode (Controller access point- AP manager). Management through NGS-1000 (X86 hardware controller) systems allows for efficient structuring and controllability of large network infrastructures in a wide range of environments. Because of the simple functionality of Thin APs, thin AP devices experience better CPU and memory loading, improving the overall performance of the network infrastructure. Thin AP mode provides only single streamlined data flow to monitoring modules, which simplifies the surveillance state of TAP devices. Access Points operating under TAP mode can only provide status modules to administrators. Thin AP devices cannot control themselves, and instead needs other devices such as NGS CenOS 4.0 CAP mode (Controller access point- AP manager) to provide management settings. Thin APs provide a sense of network security because if the device were stolen or hacked, there would be no valuable information susceptible to loss due to the device s simplicity and lack of functionality. Guest Portal Hotspot of AAP Mode Customizable Login 7

8 Service provider can benefit from the flexible web redirection service. This service provides a set of location, browser, and user-specific information to the backend system to enable value added personalized service provided by the WISP. Detailed location information is available via HTTPs/XML interfaces. Web pages can be either stored locally on the OS or remotely on a guest portal server. Authorization Authorization: access control to network resource such as protected Network with intranet, Internet, and bandwidth. Web Authentication Authentication: single sign-on (SSO) client with authentication integrated into the local authentication environment through local, RADIUS Server and OAuth2.0 Support internet bandwidth control and restrict the number of guests. Allow MAC binding IP address for local users authentication. Support Web-based for SSL browser-based authentication Default support OAuth2.0 by Google and Facebook account authentication Radio Resource Simultaneous air monitoring and end user service of AAP and TAP mode Dense deployment options for capacity optimizations Hot Standby at TAP mode (supports fail-over as a standby TAP mode) Load Balance with another available TAP mode(real-time users limitation) 8

9 Wireless Feature Transmission power control : Layer 1~9 Channel selection : Manual or Auto IEEE802.11f IAPP : to facilitate faster roaming for the stations among different APs nearby No of associated clients per AP : 64 Multiple ESSID per Radio: 8 and support Tag VLAN Dynamic Wireless re-transmission Channel Bandwidth setting : 20MHz or 20/40MHz HT Tx/Rx Stream selection : 1 or 2 Control Access Point (ESSID) Signal for on/off. Wireless Security / Encryption WPA/WPA2 personal and enterprise AES(CCMP): 128bit (FIP-197)TKIP: RC4-40 IEEE802.1X network login user authentication (EAP-MD5/TLS/TTLs) EAP over LAN (EAPoL) transport with PEAP and EAP-TLS authentication WPA/WPA2 enterprise support RADIUS server authentication (RFC2618) User Name and encryption key binding for strong network identity creation Hidden SSID broadcast support, and VLAN assignment on ESSID Blocks client to client discovery within a specified VLAN (ESSID) Access Control list (ACL) by MAC Address Quality of Service Download and Upload traffic control and support Traffic Analysis and Statistics Packet classifications via DSCP (Differentiated Services Code Point) and Support IEEE802.11e WMM Support COS and DiffServ/TOS, IEEE 802.1Q Tag VLAN priority control User Management Users Session Monitor SSL protected login portal page 9

10 Login Session idle time out setting Login time frame control Support User Log and traffic statistic backup to system log server Guest used Internet service control by Count Limit / Login Time / QoS control System Administration Provide customizable login and logout portal page by Web Page CLI access (Remote Management) via Telnet and SSH Web base setting interface and Administrative Access : HTTP / HTTPS protocol Support local and remote firmware upgrade (via the Web)and Utilities to backup and restore the system configuration system Log backup by remote system log server System time Update support NTP Server and manual Status monitor Status monitoring of on-line users and authentication users Real-Time Online Users Traffic Statistic Reporting and users connection status Support Syslog for diagnosing and troubleshooting User traffic history logging WM-100GX-N+7-NGS Hardware Key Features 800mW at 2.4Ghz Output extreme High Power Provides 2.4GHz 7dBi Smart Omni Directional Antenna IEEE n 1Tx / 1Rx Design, Bandwidth of up to 150Mbps(Tx), 150Mbps(Rx) link rate Integragted IEEE 802.3af Power over Ethernet (PoE) in this device. Ethernet RJ45 x 2 port connector and Phone RJ11 x2 port design WM-100GX-N+7-NGS Hardware Application 10

11 Mounting Application Desktop Stand Bracket Stand on Desktop Wall Mounting Mounting on Wall Ceiling Mounting Mounting on Ceiling WM-100GX-N+7-NGS Hardware Specifications Application Software OS System Compatible edition Cerio CenOS 3.0 and Cerio CenOS 4.0 Software Core Specifications Standards Conformance IEEE b/g/n compliant IEEE / IEEE 802.3u IEEE 802.3af Power over Ethernet IEEE i Preauth (PMKSA Cache ) IEEE d Multi country roaming IEEE 802.1Q Tag VLAN IEEE802.11f IAPP IEEE802.11e WMM Ethernet Configuration 10/100BASE-TX Auto MDI/MDI-X RJ-45 Ethernet * 2 (Power over Ethernet af PoE in ) Telephone Configuration RJ-11 Pass Through In connector, Out connector 11

12 LED Indicators ( Power / Network Access ) LED x 1 Wireless Specifications Data Transfer Rate Frequency Range IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing) IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps IEEE802.11n : 150Mbps (Tx), 150Mbps (Rx) ~ 2.462GHz (USA) ~ 2.484GHz (Japan) ~ 2.472GHz (Europe ETSI) ~ GHz (Spain) ~ GHz (France) Channel Spacing Media Access Protocol Modulation Method IEEE802.11b/g/n : 20/40MHz CSMA / CA with ACK IEEE b: DSSS (DBPK,DQPSK,CCK) IEEE g/n: OFDM (64-QAM,16-QAM,QPSK,BPSK) Operating Channels b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France Transmit Power Variation Receiver Sensitivity Max : 29 ± 1 dbm Max : -96dBm Environmental & Mechanical Characteristics Operating Temperature -25 C ~ 55 C Storage Temperature -25 C ~ 65 C Operating Humidity 10% to 80% Non-Condensing Storage Humidity 5% to 90% Non-Condensing Antenna Bundle 7dBi SMA Omni Directional Antenna Form Factor Stand Bracket : for Stand / Wall Mounting / Ceiling Mounting System Power Consumption 8 Watt Max. Input Power Require 803.3af 48V PoE Ethernet Interface Power In 12

13 Dimensions ( W x H x D ) Main Unit : 52 x 76.2 x 35mm Stand/Mounting Bracket : 64 x 85.5 x 54 mm Main Unit With Bracket: 64 x 85.5 x 55 mm Unit Weight Main Unit 72.5g, Stand/Mounting Bracket 23.5g Certifications CE, FCC, NCC, BSMI, ROHS Compliant Package Content 100GX-N Main Unit RJ-45 UTP Cable Power Adapter ( Power Supply ) PoE Adapter 7dBi Thin Type Antenna Stand/Mounting Bracket CD Manual Quick Installation Guide Warranty Card 13