CertifyMe. CertifyMe

Transcription

1 CertifyMe Number: Passing Score: 800 Time Limit: 120 min File Version: CertifyMe

2 Exam A QUESTION 1 Which command is used to enable Cisco NSF for BGP? A. 6500(config-router)# bgp graceful-restart B. 6500(config-router)# bgp nsf C. 6500(config)# bgp enable nsf D. 6500(config-router)# enable nsf-capable E. 6500(config-router)# nsf Correct Answer: A /Reference: QUESTION 2 You are using RPR. A switchover event will be triggered if either of which two of these fails? (Choose two.) A. An administratively monitored line card B. A service module C. A DFC on a monitored line card D. An inter-supervisor clock synchronization E. An active supervisor MSFC E /Reference: QUESTION 3 Which three of these are examples of FHRPs? (Choose three.) A. HSRP B. Proxy ARP C. IRDP D. VRRP E. GLBP F. RIP Correct Answer: ADE /Reference: 2 QUESTION 4 A customer has installed an FWSM in the data center. Which feature must be configured to enable FTP to work?

3 A. Dynamic NAT B. Dynamic PAT C. Access lists D. Transparent mode E. Deep packet inspection Correct Answer: E /Reference: QUESTION 5 Which ingress QoS trust setting sets the CoS or ToS values of any frame entering that port to zero? A. Trust CoS B. Trust IP precedence C. Untrusted D. Trust DSCP Correct Answer: C /Reference: QUESTION 6 In a Cisco Catalyst 6500 Series Switch, which engine is required in order to use the distributed Cisco Express Forwarding architecture? A. DFC B. PFC3A C. MSFC3 D. PFC3B E. PFC3BXL Correct Answer: A /Reference: 3

4 QUESTION 7 Which two features make up the fault management framework? (Choose two.) A. CiscoWorks application B. Generic Online Diagnostics C. Soft high availability D. HP OpenView E. CiscoWork Resource Management Essentials Correct Answer: BC /Reference: QUESTION 8 Which command is used to enable Cisco NSF for EIGRP? A. 6500(config-router)# eigrp nsf B. 6500(config)# eigrp enable nsf C. 6500(config-router)# enable nsf-capable D. 6500(config-router)# nsf /Reference: QUESTION 9 Which NAM data-collection method will provide a summary report of utilization and error rates on each switch interface? A. SPAN B. VACLs C. Mini-RMON D. Core monitoring Correct Answer: C /Reference: QUESTION 10 Which command can be used to regain access to a non-responding Cisco NAM in slot 3? 4 A. Module slot 3 reset B. Reload module slot 3

5 C. Slot 3 reload D. Hw-module module 3 reset /Reference: QUESTION 11 What must be configured on the FWSM to forward traffic to a filtering server? A. The filtering server as an authentication provider (aaa-server) B. All web traffic so that it is directed only to the filtering server (access-list) C. All HTTP requests so that they are redirected to the filtering server (fixup protocol) D. All HTTP requests so that they are sent to the filtering server (url-server) /Reference: QUESTION 12 HSRP active and standby routers send hello messages to which multicast address? A. IP address , IP protocol number 112 B. IP address , UDP port number 2000 C. IP address , UDP port number 1985 D. IP address , UDP port number 3222 Correct Answer: C /Reference: QUESTION 13 What must be configured on the NAM to allow an NMS to access the NAM? A. VACLs B. HTTPS service C. SNMP community strings D. TACACS+ authentication 5 Correct Answer: C /Reference:

6 QUESTION 14 What must you do to enable HTTPS as the access protocol on the NAM? A. Enable the HTTP server, then enable the SSL service. B. Install a strong crypto patch on the NAM, then enable the HTTPS server. C. Ensure that 128-bit cryptography is enabled, then enable the HTTPS server. D. Enable the HTTP server, then issue the http secure server enable command. Correct Answer: B /Reference: If you plan to use the HTTP secure server (HTTPs), then you must first download and install the NAM software K9 crypto patch. Until you install the patch, the ip http secure commands are disabled. You can download the NAM software K9 crypto patch from Cisco.com. Reference: QUESTION 15 Which of these actions must be taken in order to support an EEM script on a system that is enabled for Cisco Catalyst 6500 VSS 1440? A. The EEM script must be uploaded via CiscoWorks. B. The EEM script must be loaded to both supervisor modules. C. The EEM script must be uploaded on the active supervisor module only. D. VSS must be disabled, the EEM script uploaded, and VSS re-enabled. Correct Answer: B /Reference: QUESTION 16 Which two functions are performed by the Link Management Protocol? (Choose two.) A. Determine which ports comprise the VSL B. Track and reject unidirectional links C. Determine the compatible hardware version D. Exchange the chassis ID between the two switches E. Determine the active and standby control plane roles Correct Answer: BD

7 /Reference: 6 QUESTION 17 Which two tools are used to define EEM policy? (Choose two.) A. CLI applet B. Tcl script C. CiscoWorks Agent D. SNMP Trap E. Protocol Definition Language Module Correct Answer: AB /Reference: QUESTION 18 Which of these commands sets GigabitEthernet3/3 and GigabitEthernet 3/12 as sources of a local SPAN session? A. Monitor session 1 source interface GigabitEthernet3/3, 12 B. Monitor session 4 source interface GigabitEthernet3/3, GigabitEthernet3/12 C. Monitor session 1 source list GigabitEthernet3/3, 3/12 D. Monitor session 3 source interface list GigabitEthernet3/3, 3/12 Correct Answer: B /Reference: QUESTION 19 Which of these is a requirement for RPR+ deployment? A. The supervisor Ethernet ports must be connected for synchronization B. The startup configuration must be manually synchronized C. The installed line cards must be Cisco Catalyst 6700 Series line cards D. Two identical supervisors must be used /Reference: QUESTION

8 The Cisco NAM in slot 7 does not have an initial configuration yet. Which of these commands can be used to access this Cisco NAM? A. Session slot 7 processor 1 B. Hw-module module 7 console C. Slot 7 session console D. Session slot 7 console Correct Answer: A /Reference: QUESTION 21 In a Cisco Catalyst 6500 Series Switch, in which slot or slots should you install the NAM? A. Slots 1 to 4 B. Slot 5 or 6 C. Any slot except a supervisor module slot D. The slots that are closest to the supervisor modules Correct Answer: C /Reference: QUESTION 22 Which of these GOLD enhanced features captures and tracks critical information specific to a line card, such as uptime, temperature sensor, and critical errors information? A. Bootup diagnostics B. Scheduled diagnostics C. Systems Event Archive D. Non-disruptive health diagnostics E. On-Board Failure Logging Correct Answer: E /Reference: Reference: QUESTION 23 Which of these is true in regards to deleting a file from a file system on a Cisco Catalyst 6500 Series Supervisor Engine 720? 8

9 A. The file is permanently deleted from a supervisor bootflash using the delete command. B. The squeeze command must be used on CompactFlash to permanently delete a file. C. The undelete command is used to undelete a file on a boot disk. D. The squeeze command is used to reclaim the space of deleted files on a supervisor bootflash. /Reference: QUESTION 24 In a Cisco Catalyst 6500 VSS 1440 domain on a Catalyst 6509 Switch, which command lists the files present on the CompactFlash card in the first slot on the active switch? A. dir disk0: B. dir sw1-slot5-disk0: C. dir vss-active disk0: D. dir sw1-slot5-bootflash: E. dir vss-sw1-disk0: Correct Answer: B /Reference: QUESTION 25 Which of these supervisor switchover mechanisms offers the shortest switchover time? A. RPR B. RPR+ C. SRM with SSO D. Cisco NSF with SSO E. SSO with Cisco NSF disabled /Reference: QUESTION 26 A customer firewall is designed as follows: Inside network: VLAN /24 Outside network: VLAN 50

10 /24 Which mode must you configure on the FWSM to enable this design? A. Gateway mode B. Multiple context mode C. Routed mode D. Transparent mode Correct Answer: C /Reference: QUESTION 27 Which command lists all the available file systems on a Cisco Catalyst 6500 Series Switch? A. Dir B. Show file system C. Dir /all D. Show /all E. Dir /all-filesystems Correct Answer: B /Reference: QUESTION 28 Which of these commands will enable RPR+ on a Cisco Catalyst 6500 Series Switch with Supervisor Engine 720-3A and Supervisor Engine 720-3B? A. 6500(config-red)# mode rpr-plus B. 6500(config)# redundancy mode rpr-plus C. 6500(config)# supervisor-redundancy rpr-plus D. 6500(config-red)# redundancy rpr-plus E. RPR+ cannot be used in this case Correct Answer: E /Reference: 10 QUESTION 29 When configuring VLANs on the FWSM, how are VLANs associated with contexts? A. Associated with the physical FWSM B. Directly associated with a single context C. Directly associated with multiple contexts

11 D. Associated with VLAN groups that are associated with a single context E. Associated with VLAN groups that are associated with multiple contexts Correct Answer: C /Reference: QUESTION 30 What is the purpose of an AVG router in a GLBP group? A. To forward traffic for the assigned virtual MAC address B. To reply to ARP requests for the virtual IP address C. To assume an active role in case of primary router failure D. To redirect traffic to a secondary AVF if the primary AVF fails Correct Answer: B /Reference: QUESTION 31 A customer network is configured as follows: NetFlow is on for all core switch interfaces. The NAM receives NDE packets from each switch. Reports show aggregate data for all interfaces. How would you view data for specific interfaces on a given switch? A. Enable NetFlow only on the interfaces that you want to view. B. Create ACLs on the NAM data ports to filter the NDE traffic. C. Create a custom NDE data source in Cisco Traffic Analyzer and specify the interfaces that you want to view. D. Limit the NDE data capture by specifying the VLANs that apply to the interfaces that you want to view. Correct Answer: C /Reference: 11 QUESTION 32 You are configuring a NAM-2 in a Cisco Catalyst 6506 Switch. How many SPAN sessions can be configured to capture traffic to the NAM? A. One B. Two C. Four D. Unlimited Correct Answer: B

12 /Reference: QUESTION 33 An administrator can ensure that a selected router becomes the AVG for GLBP group 5 on a Cisco Catalyst 4900 Series Switch by using which command? A. 4900(config-if)# glbp 5 avg priority 110 B. 4900(config)# avg 5 priority 110 C. 4900(config-glbp)# avg priority 110 D. 4900(config-if)# glbp 5 priority 110 /Reference: QUESTION 34 Which of these commands is used to set the router priority to 150 for HSRP group 10 on a Cisco Catalyst 4900 Series Switch? A. 4900(config-if)# hsrp 10 priority 150 B. 4900(config-if)# standby 10 priority 150 C. 4900(config-hsrp)# priority 150 D. 4900(config-standby)# priority 150 Correct Answer: B /Reference: 12 QUESTION 35 On a Cisco Catalyst 6500 Series Supervisor Engine 720, an aggregate policer can be applied on which three of these? (Choose three.) A. An IP subnet B. A module with a DFC C. A fabric channel interface D. A port E. A VLAN F. A group of VLANs EF /Reference:

13 QUESTION 36 Refer to the exhibit. Which command turns on FWSM traffic authentication from the Internet to an insidenetwork SMTP server at address ?

14

15 A. Access-list allow-in extended permit smtp any host B. Access-list allow-in extended permit tcp any host eq smtp C. Aaa authentication allow-in extended permit tcp any host eq smtp D. Aaa authentication match smtp any host server name corpaaaserver 13 Correct Answer: B /Reference: QUESTION 37 Which command is used to activate a Cisco IOS maintenance pack on a Cisco Catalyst 6500 Series Switch? A. Install activate B. Ios modularity enable C. Activate modularity D. Install modularity enable Correct Answer: A /Reference: QUESTION 38 Refer to the exhibit. What do you need to configure to prevent spanning-tree loops from occurring between the two FWSMs?

16

17 14 A. FWSMs in transparent mode B. Ethertype ACLs to allow BPDUs C. FWSMs in multiple-context mode D. Failover and state interfaces on the same VLAN Correct Answer: B /Reference: QUESTION 39 In a Cisco Catalyst 6500 Series Switch with redundant supervisors, how is the Cisco IOS image upgraded? A. The active supervisor automatically synchronizes the image to the standby supervisor. B. The standby supervisor is removed and reinstalled in the chassis to synchronize images. C. The line cards in the chassis are reloaded upon supervisor switchover. D. SSO is used to automatically synchronize images between the active and standby supervisors. Correct Answer: C /Reference: QUESTION 40 You are setting up a Cisco Catalyst 4900 Series Switch, and would like to be able to do two things: enable tracking for interface GigabitEthernet 3/20 in VRRP group 3 decrement VRRP router priority by 10 Which command would you use? A. 4900(config-if)# vrrp 3 track GigabitEthernet3/20 decrement 10 B. 4900(config-vrrp)# track GigabitEthernet3/20 decrement 10 C. 4900(config)# vrrp 3 tracking GigabitEthernet3/20 10 D. 4900(config-if)# vrrp 3 track GigabitEthernet3/20 /Reference: : decrement of 10 is the default. Otherwise A will be correct QUESTION 41 Which two diagnostics are part of GOLD? (Choose two.) A. Non-disruptive health diagnostics B. Embedded Event Manager diagnostics C. Bootup diagnostics D. CallHome

18 E. Tcl-based fault policies Correct Answer: AC /Reference: QUESTION 42 Which two benefits are realized when deploying Cisco Catalyst 6500 VSS 1440 functionality in a data center? (Choose two.) A. Stateful Switchover across chassis B. Enhanced security of network equipment C. Enhanced speed of spanning-tree convergence D. Reduced number of Inter-Switch Links E. Implementation of Multichassis EtherChannel F. Deployment of VRRP and HSRP Correct Answer: AE /Reference: QUESTION 43 Which two file systems can hold a Cisco Catalyst 6500 IOS image? (Choose two.) A. System: B. Disk0: C. Sup-microcode: D. Nvram: E. Sup-bootdisk: F. Flash: Correct Answer: BE /Reference: 16 QUESTION 44 A Cisco Catalyst 6500 Series Switch suffers a supervisor failure. Which statement is true regarding Cisco NSF functionality? A. The line cards are reloaded. B. The neighbouring routers do not participate in Cisco NSF. C. The Cisco Express Forwarding cache is pruned. D. Layer 3 reconvergence does not occur. E. Cisco NSF can be deployed with RPR+.

19 /Reference: QUESTION 45 Which command enables the configuration of the first Gigabit Ethernet interface on the module in slot 2 of the standby Cisco Catalyst 6500 VSS 1440 switch? A. Interface gigabitethernet 2/1 vss standby B. Vss standby interface gigabitethernet 2/1 C. Switchto vss standby interface gigabitethernet 2/1 D. interface gigabitetherhent 2/2/1 E. interface switch 2 gigabitethernet 2/1 /Reference: QUESTION 46 How many virtual MAC addresses can member routers in a GLBP group serve? A. Up to 4 B. Up to 16 C. The number of member routers D. A number specified by the administrator Correct Answer: A /Reference: 17 QUESTION 47 A POP3 and an SMTP server must be visible at the same address through an FWSM. Which type of NAT is required? A. Dynamic NAT B. Identity NAT C. Policy dynamic NAT D. Static NAT /Reference:

20 QUESTION 48 How can a customer with multiple FWSM contexts limit the number of connections that are permitted in each context? A. Map the context to a class, and apply resource limits to the class. B. Map the context to a VLAN, and apply resource limits to the VLAN. C. Map the context to a class, and apply resource limits to the context. D. You cannot limit the number of connections that are permitted in a context. Correct Answer: A /Reference: QUESTION 49 Your customer wants to use distinct security policies for different departments. What must be configured? A. Distinct VLAN for each department B. Separate ACL group for each department C. Unique firewall context for each department D. Individual security level for each department Correct Answer: C /Reference: QUESTION 50 Which command will associate VLANs 10 and 11 with the FWSM in slot 5? 18 A. Firewall vlan-group B. Firewall vlan-group C. Firewall module 5 vlan D. Firewall module 5 vlan-group Correct Answer: B /Reference: Example: Router(config)# firewall vlan-group Router(config)# firewall vlan-group Router(config)# firewall vlan-group Router(config)# firewall module 5 vlan-group 50,52 Router(config)# firewall module 8 vlan-group 51,52

21 QUESTION 51 Which two statements regarding NetFlow and NDE on a Cisco Catalyst 6500 VSS 1440 system are correct? (Choose two.) A. NetFlow collection is performed on both supervisors. B. NetFlow collection is performed on the active supervisor only. C. NetFlow is currently not supported. D. NDE is performed by the control plane of the active supervisor. Correct Answer: AD /Reference: QUESTION 52 What is the maximum number of local SPAN source sessions on a Cisco Catalyst 6500 VSS 1440? A. 2 B. 4 C. 14 D. 66 Correct Answer: A /Reference: QUESTION 53 Which command exports traffic statistics collected on NetFlow to a NetFlow collector listening on UDP port 2002 and at IP address ? 19 A. 6500(config-if)#ip flow-export collector B. 6500(config)#ip nde server C. 6500(config)#ip flow-export server D. 6500(config)#ip flow-export destintation /Reference: QUESTION 54 Which two tasks are performed by the Policy Feature Card? (Choose two.) A. Quality of Service B. IGP routing

22 C. Layer 2 and Layer 3 switching D. Cisco Express Forwarding table creation Correct Answer: AC /Reference: QUESTION 55 Which two faults can EEM detect? (Choose two.) A. Physical security breach B. Memory leak C. Misconfigured EIGRP D. CPU hog events Correct Answer: BD /Reference: QUESTION 56 Which command enables virtual firewalls on the FWSM? A. Enable virtual B. Enable context C. Mode context D. Mode multiple 20 /Reference: QUESTION 57 How do you configure the management port VLAN on the NAM on a Cisco Catalyst 6500 Series Switch running Cisco Catalyst operating system? A. Interface vlan [vlan_id] analysis module [mod_num] management-port B. Analysis module [mod_num] management-port access-vlan [vlan_id] C. The port cannot be configured. D. No configuration is necessary.

23 /Reference: Devices running Catalyst OS do not need to configure a VLAN as the NAM management port. The port is automatically synchronized to the VLAN assigned to interface sc0 on the Supervisor engine. Reference: quick/guide/qsg.html QUESTION 58 When SSO is deployed, what happens upon active supervisor failure? A. The DFCs on the line cards are repopulated B. The FIB entries are repopulated C. The QoS policy and security ACLs are reconfigured D. The standby supervisor assumes control E. The PFC repopulates the NetFlow tables /Reference: QUESTION 59 You are a help desk trainee for Hotcerts.com. Just a simple question for you: the blade switches belong to which kind of switches? A. Top-of-rack switches B. End-of-row switches C. Modules that fit into blade server chassis D. Modules that fit into MDS switches Correct Answer: C /Reference: 21 QUESTION 60 You work as a Cisco data center sales professional at Hotcerts.com, and you are negotiating with with a corporate manager, which of the following statements would be your best saying? A. A single network spanning multiple protocols, using Ethernet as a backbone, is the basis of the nextgeneration data center. B. Network-embedded intelligence means that functions can be swiftly deployed and redeployed across the data center. C. Network-based intelligence can be shared across all connected applications and devices and can deliver tens of gigabytes of throughput along with submillisecond latencies. D. The network is the foundation of the twenty-first-century data center, so Cisco should be a prime architectural resource for designing all aspects of the data center. Correct Answer: B

24 /Reference: QUESTION 61 You work as a Cisco data center sales professional at Hotcerts.com, and you are negotiating with with a technical manager, which of the following statements would be your best saying? A. Cisco's end-to-end strategy for the data center means that it can provide consultancy and support for servers, and provide storage as well as networks. B. Cisco's financial position is reflected in its stock market position and shareholder value. C. Cisco's networking expertise places it in a prime position to deliver virtual servers from within embedded network platforms running VMware. D. Network-embedded devices can be logically divided to allow different security policies to be implemented to meet different requirements, while maintaining a single point of monitoring, management, and control. /Reference: QUESTION 62 You work as a Cisco engineer at Hotcerts.com. What's the unique advantage of SAN business against Brocade for the Cisco MDS switch? 22 A. Cisco has been delivering director-class storage switches for longer than Brocade. B. The Cisco MDS switch can support Gigabit Ethernet as well as Fibre Channel, while Brocade supports only Fibre Channel. C. Cisco has demonstrated excellent investment protection by allowing new generation linecards to work in first generation directors. D. The real Cisco competition was McData, until Brocade bought it and tried to make it compatible with their legacy switches, leaving Cisco with the only director-class switches in the industry. Correct Answer: B /Reference: QUESTION 63 You work as a Cisco data center sales professional at Hotcerts.com. A potential customer is planning to reduce both operational and capital budgets, meanwhile, he also wants to promote end-to-end data center security. What's the best response to meet both of his requirements? A. Buy a number of Cisco Catalyst 6500 Series FWSMs now, and to have them installed in each Cisco Catalyst 6500 Series Switch in the data center, ready to be brought on line when needed in the future B. Buy a full Cisco analysis of the data center security, as part of a full-service package that can be paid for over an extended period

25 C. Buy a number of Cisco ACE Modules now, and to have them installed in each Cisco Catalyst 6500 Series Switch in the data center, ready to be brought on line when needed in the future D. Recommend purchasing the Cisco Catalyst 6500 Series FWSM and the Cisco ACE Module or both to allow multiple virtual contexts of each to be deployed as required in the future, without requiring more hardware to be acquired (saving capital budget), with a single point of management and control (cutting operating costs) /Reference: QUESTION 64 You work as the network administrator at Hotcerts.com. Which two features of a business implement that you can use to achieve better utilization of IT resources? (Choose two.) A. Role-based access control 23 B. Embedded network intelligence C. Distributed management D. Consolidation of data center resources Correct Answer: BD /Reference: QUESTION 65 You work as a Cisco engineer at Hotcerts.com. With your knowledge on Cisco field, which is a considerable advantage of Cisco's data center end-to-end strategy? A. Service-oriented backbone network B. Service-oriented infrastructure C. Service-oriented architecture D. Service-oriented networked Ethernet transmission connection system Correct Answer: B /Reference: QUESTION 66 You are the new Hotcerts Trainee. Which description you can recognize as a feature of the Cisco Catalyst 6500 Series FWSM? A. It can carry out multiple virtual firewalls across the data center but only within its own tier, not across tiers. B. It is a standalone appliance and cannot be fitted into the Catalyst 6500 Series Switches. C. It fits into the Catalyst 6500 Series Switches and allows logical firewalls to be deployed across the whole data center. D. It is an embedded function of the Cisco Application Control Engine Module, which can be fitted into the

26 Catalyst 6500 Series Switches. Correct Answer: C /Reference: QUESTION 67 You are a help desk trainee for Hotcerts.com. As far as you know, what advantage that the overall virtualization strategy for the data center can get from network-based virtualization? 24 A. Carrying multiple protocols across the same network B. Combining ports for high availability and redundancy C. Merging the core and aggregation layers D. Deploying multiple service contexts on the same hardware /Reference: QUESTION 68 You are the senior desktop administrator for Hotcerts.com. Your company plans to implement virtual SSL security contexts logically across the data center network from a single physical device, so which product you will recommend? A. Cisco Firewall Services Module B. Cisco Nexus 7000 Module C. Cisco Storage Services Module D. Cisco Application Control Engine Module /Reference: QUESTION 69 You are a Cisco engineer of Hotcerts.com. As much as you know, which of the following would be the most corresponding description that Cisco has on the data center? A. Cisco's competitive positioning is to concentrate solely on faster, lower-latency connection systems across all network technologies and protocols. B. Cisco is moving from being solely a supplier of data networking-based products to being a supplier of storage and server virtualization solutions that can be deployed across the data center. C. Cisco focuses on LANs, WANs, and SANs, and on service delivery solely in direct support of these networks. D. Cisco has a wide perspective on the data center, with network-embedded services that support servers,

27 applications, security, and storage. /Reference: 25 QUESTION 70 You are the senior desktop administrator for Hotcerts.com. The manager of the company is concerning that embedding service modules in the network might create a single point of failure in the company system. Then how can you make the manager clearly understand how Cisco network services can handle this situation? A. By promoting Cisco on-site service support, which means that an on-site spare is held for instant swap out B. By accepting the point but demonstrating how the benefits far outweigh any potential problem C. By pointing out that switches in networks already create the potential for a single point of failure, but that these are still widely used without being seen as a significant risk D. By explaining that Cisco service modules are mounted in highly resilient director-class switches and can be duplicated for seamless failover in the event of a problem /Reference: QUESTION 71 You work as a Cisco engineer at Hotcerts.com. You are familiar with the Cisco Nexus 7000 Series Switches, so as far as you know, which product supports one of its features---- the virtual device contexts? A. Only the Cisco Nexus 7000 Series supports virtual device contexts. B. Most major network manufacturers have products that support virtual device contexts. C. Force 10's E1200i and the Cisco Nexus 7000 Series are the only products in the industry that support virtual device contexts. D. Cisco Catalyst 6500s support virtual device contexts when they are connected together to create a single virtual switch. Correct Answer: A /Reference: QUESTION 72 You are a Cisco engineer of Hotcerts.com. When compare the Brocade LSAN to the Cisco VSAN, which of the following is correct? A. The Cisco VSANs and the Brocade LSANs are basically the same concept. B. The Cisco VSAN can allow a single physical fabric to be logically segmented; the Brocade LSAN needs physically separated fabrics.

28 C. The Cisco VSAN is a former-generation version of the Brocade LSAN. D. The Cisco VSAN delivers security between environments by creating multiple physical fabrics, while Brocade's LSAN allows a single physical fabric to be logically segmented and, as a result, compromises security between environments. Correct Answer: B /Reference: QUESTION 73 You work as the network administrator at Hotcerts.com. Which of the following is correct if using the Cisco VFrame DC as a data center provisioning device? A. Cisco VFrame DC can work with VMware. B. Cisco VFrame DC can provision only network resources. C. Cisco VFrame DC can work only with the Nexus 7000 Series Switches. D. Cisco VFrame DC can work with the Catalyst 6500 Series Switches and the Nexus 7000 Series Switches but not with MDS. Correct Answer: A /Reference: QUESTION 74 You work as the network administrator at Hotcerts.com. You configure the network in combination with Dynamic Host Control Protocol (DHCP) snooping for the company, in order to prevent spoofing attacks in the data center access layer, which feature will play a role? A. port security B. Reverse-path Forwarding C. RFC 3704 filtering D. Dynamic ARP Inspection /Reference: QUESTION 75 You are a help desk trainee for Hotcerts.com. A potential customer needs to know the Layer 2 access design will be applied into which entironment? 27 A. Improved convergence time B. Load balancing of uplink paths C. Multicast applications

29 D. Service modules in the aggregation layer /Reference: QUESTION 76 You are a help desk trainee for Hotcerts.com. A potential customer requires to scale up to 1.4- Tb/s system bandwidth capacity, which two solutions you will recommend? (Choose two.) A. Cisco Nexus 7000 B. Cisco Nexus 7010 C. VSS-aggregated Nexus 7010 D. Cisco Catalyst 6500 VSS 1440 Correct Answer: BD /Reference: QUESTION 77 A potential customer is implementing Cisco Catalyst 4948 Switches in a top-of-rack access layer design, what advantage will he get from this activity? A. Improved server density B. Simpler logical topology C. Increased fault tolerance D. Improved power distribution /Reference: QUESTION 78 Compared with the traditional L2/L3 network design, which advantages does VSS have? (Choose four) 28 A. VSS improves the operational efficiency by simplifying network to reduce the cost of the switch management to at least 50%. B. VSS can optimize the uninterrupted communication C. VSS can expand the system bandwidth to 1.4 Tbps. D. VSS uses the existing multilayer switching structure E. VSS can expand the system bandwidth to 1.8 Tbps. Correct Answer: ABCD

30 /Reference: QUESTION 79 Where should VSS be deployed in the network? (Choose three) A. The core layer of the campus network or data center. B. The distributed layer of the campus network or data center. C. The data center access layer (server connection) D. Data center distributed layer Correct Answer: ABC /Reference: QUESTION 80 Which two are components of VSS? A. Virtual switch members B. Virtual switch link (VSL) C. Virtual router members D. Virtual router link (VRL) Correct Answer: AB /Reference: QUESTION 81 Which statements best describe SPAN? (Choose three) A. SPAN technology is mainly used to monitor data flow on the switch B. It can be divided into two categories : the local SPAN and the remote SPAN 29 C. Using the local SPAN can monitor all network traffic D. RSPAN can monitor layer2 protocols Correct Answer: ABC /Reference: QUESTION 82 Which RMON packets can be supported by NAM? (Choose 3) A. Mini-RMON

31 B. Complete-RMON C. Mini- RMON2 D. Complete- RMON2 Correct Answer: ABD /Reference: QUESTION 83 Catalyst 6500 NAM can be deployed in any Catalyst 6500 Series chassis, what advantages it can provide? (Select all appropriate) A. Integrated solutions B. Scalability C. Investment protection D. Standard-based E. Perfect LAN network monitoring solutions Correct Answer: ABCDE /Reference: QUESTION 84 Which statements are correct about NAM? (Select all appropriate) A. NAM provides remote monitoring functions based on RMON and RMON-2 (MIB) B. Collecting data from all layers C. NAM is a component of the Cisco integrated voice, video and data architecture (AVVID). D. Define powerful multi-service switching in the Cisco LAN network 30 Correct Answer: ABCD /Reference: QUESTION 85 Which three are main components of a Cisco Netflow system? (Choose three)

32 A. Detector B. Collector C. Analyser D. Reporting System Correct Answer: ABD /Reference: QUESTION 86 Which two options are correct about SSO? (Choose two) A. In order to accomplish SSO, all application systems need to share one authentication system B. In order to accomplish SSO, all application systems need to be able to identify and collect ticket information. C. It is needed to have a single database of user information D. Only a single authentication server can be used as a unified authentication system Correct Answer: AB /Reference: SSO in this context means Single Sign On, not Stateful Switch Over ^^ QUESTION 87 Which statements best describe QoS? (Select all appropriate) A. QoS is a mechanism of network security. B. QoS can be used to solve such problems as network delay and congestion. C. The network with QoS can identify which applications produce which data packets D. Qos can judge priority according to 802.1Q of the datagram Correct Answer: ABCD /Reference: 31 QUESTION 88 In a Cisco Catalyst 6500 Series Switch, which engine is required in order to use the distributed Cisco Express Forwarding architecture? A. DFC B. PFC3A C. MSFC3 D. PFC3B E. PFC3BXL Correct Answer: A

33 /Reference: 3 QUESTION 89 Refer to the exhibit. Which command turns on FWSM traffic authentication from the Internet to an insidenetwork SMTP server at address ?

34

35 A. Access-list allow-in extended permit smtp any host B. Access-list allow-in extended permit tcp any host eq smtp C. Aaa authentication allow-in extended permit tcp any host eq smtp D. Aaa authentication match smtp any host server name corpaaaserver 13 Correct Answer: B /Reference: QUESTION 90 You work as a Cisco data center sales professional at Hotcerts.com, and you are negotiating with with a corporate manager, which of the following statements would be your best saying? A. A single network spanning multiple protocols, using Ethernet as a backbone, is the basis of the nextgeneration data center. B. Network-embedded intelligence means that functions can be swiftly deployed and redeployed across the data center. C. Network-based intelligence can be shared across all connected applications and devices and can deliver tens of gigabytes of throughput along with submillisecond latencies. D. The network is the foundation of the twenty-first-century data center, so Cisco should be a prime architectural resource for designing all aspects of the data center. Correct Answer: B /Reference: QUESTION 91 Catalyst 6500 NAM can be deployed in any Catalyst 6500 Series chassis, what advantages it can provide? (Select all appropriate) A. Integrated solutions B. Scalability C. Investment protection D. Standard-based E. Perfect LAN network monitoring solutions Correct Answer: ABCDE

36 /Reference: QUESTION 92 Where should VSS be deployed in the network? (Choose three) A. The core layer of the campus network or data center. B. The distributed layer of the campus network or data center. C. The data center access layer (server connection) D. Data center distributed layer Correct Answer: ABC /Reference: QUESTION 93 Which command can be used to regain access to a non-responding Cisco NAM in slot 3? 4 A. Module slot 3 reset B. Reload module slot 3 C. Slot 3 reload D. Hw-module module 3 reset /Reference: QUESTION 94 What must be configured on the NAM to allow an NMS to access the NAM? A. VACLs B. HTTPS service C. SNMP community strings D. TACACS+ authentication 5 Correct Answer: C /Reference: QUESTION 95 Which two tools are used to define EEM policy? (Choose two.)

37 A. CLI applet B. Tcl script C. CiscoWorks Agent D. SNMP Trap E. Protocol Definition Language Module Correct Answer: AB /Reference: QUESTION The Cisco NAM in slot 7 does not have an initial configuration yet. Which of these commands can be used to access this Cisco NAM? A. Session slot 7 processor 1 B. Hw-module module 7 console C. Slot 7 session console D. Session slot 7 console Correct Answer: A /Reference: QUESTION 97 Which of these is true in regards to deleting a file from a file system on a Cisco Catalyst 6500 Series Supervisor Engine 720? 8 A. The file is permanently deleted from a supervisor bootflash using the delete command. B. The squeeze command must be used on CompactFlash to permanently delete a file. C. The undelete command is used to undelete a file on a boot disk. D. The squeeze command is used to reclaim the space of deleted files on a supervisor bootflash. /Reference: QUESTION 98 In a Cisco Catalyst 6500 VSS 1440 domain on a Catalyst 6509 Switch, which command lists the files present on the CompactFlash card in the first slot on the active switch?

38 A. dir disk0: B. dir sw1-slot5-disk0: C. dir vss-active disk0: D. dir sw1-slot5-bootflash: E. dir vss-sw1-disk0: Correct Answer: B /Reference: QUESTION 99 You are using RPR. A switchover event will be triggered if either of which two of these fails? (Choose two.) A. An administratively monitored line card B. A service module C. A DFC on a monitored line card D. An inter-supervisor clock synchronization E. An active supervisor MSFC E /Reference: QUESTION 100 Which command can be used to regain access to a non-responding Cisco NAM in slot 3? 4 A. Module slot 3 reset B. Reload module slot 3 C. Slot 3 reload D. Hw-module module 3 reset /Reference: QUESTION 101 In a Cisco Catalyst 6500 Series Switch with redundant supervisors, how is the Cisco IOS image upgraded? A. The active supervisor automatically synchronizes the image to the standby supervisor. B. The standby supervisor is removed and reinstalled in the chassis to synchronize images. C. The line cards in the chassis are reloaded upon supervisor switchover. D. SSO is used to automatically synchronize images between the active and standby supervisors.

39 Correct Answer: C /Reference: QUESTION 102 What is the maximum number of local SPAN source sessions on a Cisco Catalyst 6500 VSS 1440? A. 2 B. 4 C. 14 D. 66 Correct Answer: A /Reference: QUESTION 103 You work as a Cisco data center sales professional at Hotcerts.com, and you are negotiating with with a technical manager, which of the following statements would be your best saying? A. Cisco's end-to-end strategy for the data center means that it can provide consultancy and support for servers, and provide storage as well as networks. B. Cisco's financial position is reflected in its stock market position and shareholder value. C. Cisco's networking expertise places it in a prime position to deliver virtual servers from within embedded network platforms running VMware. D. Network-embedded devices can be logically divided to allow different security policies to be implemented to meet different requirements, while maintaining a single point of monitoring, management, and control. /Reference: QUESTION 104 Where should VSS be deployed in the network? (Choose three) A. The core layer of the campus network or data center. B. The distributed layer of the campus network or data center. C. The data center access layer (server connection) D. Data center distributed layer Correct Answer: ABC /Reference:

40 QUESTION 105 Which three are main components of a Cisco Netflow system? (Choose three) A. Detector B. Collector C. Analyser D. Reporting System Correct Answer: ABD /Reference: QUESTION 106 You work as a Cisco data center sales professional at Hotcerts.com, and you are negotiating with with a corporate manager, which of the following statements would be your best saying? A. A single network spanning multiple protocols, using Ethernet as a backbone, is the basis of the nextgeneration data center. B. Network-embedded intelligence means that functions can be swiftly deployed and redeployed across the data center. C. Network-based intelligence can be shared across all connected applications and devices and can deliver tens of gigabytes of throughput along with submillisecond latencies. D. The network is the foundation of the twenty-first-century data center, so Cisco should be a prime architectural resource for designing all aspects of the data center. Correct Answer: B /Reference: QUESTION 107 Which two tools are used to define EEM policy? (Choose two.) A. CLI applet B. Tcl script C. CiscoWorks Agent D. SNMP Trap E. Protocol Definition Language Module Correct Answer: AB /Reference: QUESTION 108 Which command can be used to regain access to a non-responding Cisco NAM in slot 3? 4

41 A. Module slot 3 reset B. Reload module slot 3 C. Slot 3 reload D. Hw-module module 3 reset /Reference: QUESTION 109 Which three of these are examples of FHRPs? (Choose three.) A. HSRP B. Proxy ARP C. IRDP D. VRRP E. GLBP F. RIP Correct Answer: ADE /Reference: 2 QUESTION 110 HSRP active and standby routers send hello messages to which multicast address? A. IP address , IP protocol number 112 B. IP address , UDP port number 2000 C. IP address , UDP port number 1985 D. IP address , UDP port number 3222 Correct Answer: C /Reference: QUESTION The Cisco NAM in slot 7 does not have an initial configuration yet. Which of these commands can be used to access this Cisco NAM? A. Session slot 7 processor 1 B. Hw-module module 7 console

42 C. Slot 7 session console D. Session slot 7 console Correct Answer: A /Reference: QUESTION 112 Which of these commands will enable RPR+ on a Cisco Catalyst 6500 Series Switch with Supervisor Engine 720-3A and Supervisor Engine 720-3B? A. 6500(config-red)# mode rpr-plus B. 6500(config)# redundancy mode rpr-plus C. 6500(config)# supervisor-redundancy rpr-plus D. 6500(config-red)# redundancy rpr-plus E. RPR+ cannot be used in this case Correct Answer: E /Reference: 10 QUESTION 113 You are configuring a NAM-2 in a Cisco Catalyst 6506 Switch. How many SPAN sessions can be configured to capture traffic to the NAM? A. One B. Two C. Four D. Unlimited Correct Answer: B /Reference: