PassCollection. IT certification exam collections provider, High pass rate

Transcription

1 PassCollection IT certification exam collections provider, High pass rate

2 Exam : Title : Deploying Cisco Wireless Enterprise Networks Vendor : Cisco Version : DEMO Get Latest & Valid Exam's Question and Answers 1 from Passcollection.com. 1

3 NO.1 Which IEEE standard allows for the client-ap handshake to be completed before the client roams? A k B v C r D e NO.2 After implementing mdns gateway, a school's network administrator notices that mdns wireless printers are available over the whole network. Which feature can the admin use to restrict the printer mdns advertisements to the AP that the printer is joined to and adjacent APs? A. SSO B. Priority MAC C. mdns-ap D. LSS NO.3 A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which configuration change creates the desired result? A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access point for that location. B. Set the SSID to the desired VLAN under WLANs, configure 802.1x ACS to assign the correct VLAN based on the SSID the client is authenticating from. C. Create mobility anchors for the SSID, and on the controller under the internal SSID, create a foreign map to the desired VLAN based on location. D. Configure the access point in the FlexConnect mode and set the correct VLAN to SSID mapping based on location. NO.4 By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead? A. 60 Seconds B. 30 Seconds C. 10 Seconds D. 15 Seconds NO.5 What devices can be tracked with the Cisco Context Aware Services? A. Only Cisco certified wireless devices. B. Only wireless devices. C. Both wired and wireless devices. Get Latest & Valid Exam's Question and Answers 2 from Passcollection.com. 2

4 D. Only wired devices. NO.6 A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller? A. Local B. Monitor C. FlexConnect D. Rogue Detector E. Sniffer F. SE-Connect NO.7 You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC? A. central switching with PMK (OKC) between different FlexConnect groups B. central switching with Cisco Centralized Key Management between different FlexConnect groups C. local switching with PMKID within the same FlexConnect group D. local switching with Cisco Centralized Key Management within the same FlexConnect group Answer: D NO.8 How many mdns profiles can you apply per WLAN? A. 3 B. 1 C. 4 D. 2 Explanation Note Only one mdns profile can be applied to one WLAN NO.9 By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead? A. 60 Seconds B. 15 Seconds C. 30 Seconds D. 10 Seconds NO.10 A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs? A. Disable MCS data rates used by 40 MHz channels. B. Disable VHT data rates. Get Latest & Valid Exam's Question and Answers 3 from Passcollection.com. 3

5 C. Disable data rates that use CCK. D. Disable MCS data rates 0 through 11. Get Latest & Valid Exam's Question and Answers 4 from Passcollection.com. 4