Open System Architecture Selecting the Right Cable and Connectivity for Your Application

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Open System Architecture Selecting the Right Cable and Connectivity for Your Application"

Transcription

1 Open System Architecture Selecting the Right Cable and Connectivity for Your Application Kenneth Cornelison Industry Consultant Wire and Cable Technology Engineering Resources

2 Key Discussion Points TIA system structure overview Component Ratings rated and verified Interoperability testing across different connectivity solutions Survey to evaluate performance across connectivity solutions Information valuable for system warranty content and scope Manufacturer system warranties - Key elements and attributes Summary

3 TIA and Standards Structure TIA Family of documents ranging from system to components Component, system, installation guidance and requirements IEC has similar set of documents for cables and structured cabling systems BICSI accreditation, ti standards d and document structure t

4 TIA Standards Overview Common standards - TIA 568; 569; 606; etc. Cover building, installation, administration Premise Standards - TIA 570; 758; 942; etc. Premises standards - Infrastructure Component Standards - TIA 568 Copper and Fiber

5 Rapidly Growing Technical Requirements TIA Cabling Standards Category 3: Cables and outlets up to 16 MHz. Category 5e: Cables and outlets up to 100 MHz with enhanced characteristics over cat 5. Category 6 : Cables and outlets up to 250 MHz. Category 6a : Cables and outlets up to 500MHz for 10Gbit Ethernet operation. ISO/IEC Cabling Classes - Similar structure to the TIA Class C Up to 16 MHz Category 3 Class D Up to 100 MHz Category 5e Class E Up to 250 MHz Category 6 Class Ea Up to 500MHz Category 6a (amend 1&2) Class F Up to 600 MHz Class Fa Up to 1000MHz (amend 1&2) NEXTGEN Category 8 Up to 2000MHz over 30m New Proposed Applications 2.5Gb, 5Gb and others

6 A Key Why to Standards Many reasons why for standards Common system and component characteristics facilitate system cost and ease of installation Interoperability for components and systems is one of the key reasons A basic premise of the Structured Cable System Encourages mass production, economies of scale, and broader applications Facilitates implementation of open system warranties Customer confidence Consistent and reliable performance

7 Compliant vs Verified Component Verification Third party vs internal testing and qualification Choosing components that t are independently d verified Warranties rely on verified components to assure performance

8 Structured Cabling Warranties and Performance Warranties are enhanced (and even enabled) by the standards and accreditation structure of TIA, IEC, BICSI and other organizations Warranty success depends on both the hardware performance and the installation skills of the installer Warranties available through certified installers An important result of having standards is the confidence in the market provided by standard components and installer skills

9 Project to Assess Link Performance Project initiated from a cable manufacturer s need to survey performance with recognized connectivity manufacturers Selection of widely used cable types and connectivity solutions Testing in Permanent link configuration

10 Testing Across Connectivity Manufacturers Purpose of Testing Cable manufacturers offer an open warranty on installed systems A need for an overall assessment of link performance for a range of approved connectivity solutions A way to confirm that the connectivity approval lists are appropriate for warranty coverage A snapshot verification of the open system architecture performance

11 90 Length of Category cable Cable test Establishing a Baseline Cable without connectors tested with automatic Network Analyzer (VNA) based test hardware as a baseline Key electrical parameters captured, including balance performance Good margin to both Cable and Permanent Link requirements

12 Conditions for Link Testing Permanent Link tested at 90m length Field tester used for testing All frequency sweep data exported and analyzed Performance margin and comparison to cable measurements summarized Permanent Link with two connections Terminal Outlet (TO) and Cross-connect (C1) Optional consolidation point (CP) not included

13 Testing Outline Multiple manufacturers of connectivity 6 for Category 6 UTP 6 for Category 6A UTP 3 for Category 6A FUTP Multiple tests for each combination Same length of cable used for all tests within Category family Cables listed and verified to TIA 568C.2 Limited number of operators following good practices Laboratory test environment

14 Category 6 Cable Baseline Results - NEXT (tested to 500MHz)

15 Category 6 RL and TCL Baseline Results (tested to 500MHz)

16 Cable vs Cable + Connector Electrical performance curves do change appearance when adding connectivity Split Pair Effects Connectivity design and circuitry Interaction with cable design

17 Cable and Cable + Connector A to Permanent Link Typical occurrence from all connectivity suppliers of an outlier NEXT response Overall, NEXT was the most variable across multiple connectors of the same supplier

18 Cat 6 Connector A Test Result Examples

19 Cat 6 Cable and Connector A Return Loss

20 Cat 6 Cable and Connector A TCL

21 NEXT Margin Data Overview Key Takeaway More variability than expected Main Remote

22 Return Loss Margin Data Example Consistency within a connector type

23 TCL Margin Data Example Consistency within a connector type

24 NEXT Permanent Link Performance Variability All connector types had variations from test to test But not all connector types had the same variation characteristics No one connector stood out across all combinations

25 Cat 6 NEXT Margin Variation Across 6 different manufacturers

26 Cat 6 NEXT Margin Variation Across 6 different manufacturers

27 Cat 6 NEXT Margin Variation Across 6 different manufacturers

28 Category 6 Testing Summary Even with the same cable from test to test, NEXT had the most variability from test to test Other parameters, such as TCL and RL were more consistent All tests met Permanent link requirements with margin Variability did not seem to differ whether at main or remote end of the cable

29 Category 6A UTP and FUTP Testing The same test procedure was followed for Category 6A components 90m baseline test on cable 90m links tested in a 2 connector arrangement Consistent operator and termination techniques

30 6A Permanent Link NEXT Margins Connector A

31 Cat 6A UTP More consistent NEXT, but not always the same

32 Category 6A UTP Testing Summary Overall, more NEXT consistency between tests, and between connectivity solutions than with Category 6 Consistency in the other electrical parameters (RL, TCL) among the different connectivity solutions Key attribute for 6A UTP links is Alien crosstalk, which may lead to more consistent results

33 Category 6A FUTP NEXT Summary

34 Category 6A FUTP FUTP data similar to the Category 6 UTP data Variable NEXT results from test to test Consistent data for RL, IL, TCL, and other tests

35 Permanent Link Data Summary All connectivity combinations pass the industry permanent link standards Good electrical performance allows the user the option of selecting connectivity across other key parameters with assured performance Ease of installation; cost; availability; manufacturer support Data supports warranties from cable maker across a range of connectivity options

36 Key Warranty System Attributes Requires industry standard component compliance and verification Provides guaranteed performance levels for installed system Supplier resources system support, technology, capabilities Establishes chain of communication for system performance, maintenance Establishes responsible parties for problem resolution Establishes a set of components and systems with reliable performance 3 rd party location for system test data retention Warranted channels can support multiple and new applications

37 Access to product specific information Training Resources Scope of covered products Hands-on opportunities

38 Open and Closed System Warranties Advantages of an open system warranty Choosing components to suit installation needs Flexibility for installers, system integrators Backed by Industry standard specifications and structure Closed solutions have advantages, but some drawbacks Some closed solutions are a specific example of an open solution available elsewhere There are fewer closed solutions from one manufacturer than closed solutions that use at least two different manufacturers Closed solutions that are multi-company can and do come and go over time Limited product/performance options Warranty restrictions out of network products risk the entire project warranty

39 Accredited Installations Move, add, change documentation?

40 Read the warranty first Does it have Warranty Fine Print Limited time (even a few days) to notify warranty provider of problems? Ability to transfer warranties? Void if components are more than a few months old? A choice of components to best meet the user overall needs Provider training resources providing BICSI credits? A milestone date when the warranty starts? Availability of support resources Installer, component manufacturers, etc Coverage for permanent link portion or end to end?

41 Summary Survey test results confirm performance meeting requirements There are differences among the components in the testing, but all meet requirements Variability from test to test observed even with relatively controlled testing environment Variability with both Category 6 and 6A links All components tested from a 3 rd party verified supplier Warranty decisions Knowledge of warranty coverage, details, and requirements Limitations within warranty for timing of key events, warranty scope, etc Use of components with 3 rd party verification services Flexibility in choosing components and installers

42 Thank You

CERTIFICATION PLUS SM

CERTIFICATION PLUS SM CERTIFICATION PLUS SM SYSTEM WARRANTY PROGRAM Panduit Warranty Guide PROGRAM OUTLINE TABLE OF CONTENTS: MATERIALS PAGE # Program Outline 2 Table of Contents Warranty Information 3 Introduction & Installation

More information

PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY

PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY WARRANTY GUIDE PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY WARRANTY GUIDE PROGRAM OUTLINE TABLE OF CONTENTS: MATERIALS PAGE # Program Outline 2 Table of Contents

More information

ISO/IEC TR Guidance on 40GBASE-T T Cabling

ISO/IEC TR Guidance on 40GBASE-T T Cabling 1 ISO/IEC TR 11801-99 99-1 Guidance on 40GBASE-T T Cabling - a tutorial - Alan Flatman Principal Consultant LAN Technologies Email: a_flatman@tiscali.co.uk 2 Content 1. introduction to ISO/IEC SC25 WG3

More information

Enterprise Network Test Strategies for Network Availability and Performance. A Sitaramaiah Director Fluke Networks India

Enterprise Network Test Strategies for Network Availability and Performance. A Sitaramaiah Director Fluke Networks India Enterprise Network Test Strategies for Network Availability and Performance A Sitaramaiah Director Fluke Networks India 1 Why is Enterprise Network Testing becoming increasingly important? IT is increasingly

More information

Certification for 10G copper cabling

Certification for 10G copper cabling Certification for 10G copper cabling Presented by Eric Lie, Sales Manager 1 Introduction This presentation is intended to provide an overview of the 10GBASE-T requirements for cabling The applicable standards

More information

ISO/IEC SC25 WG3. Who are they & what can they do for 802.3cg? Alan Flatman. Principal Consultant LAN Technologies.

ISO/IEC SC25 WG3. Who are they & what can they do for 802.3cg? Alan Flatman. Principal Consultant LAN Technologies. 1 ISO/IEC SC25 WG3 Who are they & what can they do for 802.3cg? Alan Flatman Principal Consultant LAN Technologies Email: a_flatman@tiscali.co.uk 2 Who are ISO/IEC SC25 WG3? Ø International systems group

More information

Single-pair cabling channel specifications

Single-pair cabling channel specifications Single-pair cabling channel specifications IEEE P802.3cg 10SPE Task Force October 25, 2017 Dave Hess, CORD DATA 10/25/2017 hess_10spe_01_1025 1 Overview JMTG organization and scope JMTG projects related

More information

Copper Cabling Standards

Copper Cabling Standards Copper Cabling Standards White paper White Paper Copper Cabling Standards v2.0 EN 1 Introduction Standard specifications are the foundation upon which most cabling and networking projects are built. Professionals

More information

Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant

Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Standardization Bureau (TSB) Consultant Moscow, 9-11 november 2011 Contents The benefits of conformity assessment Conformity

More information

Dr. Paulo Marin, EE/BSc, MSc, PhD. Electrical Engineer, ICT Consultant

Dr. Paulo Marin, EE/BSc, MSc, PhD. Electrical Engineer, ICT Consultant Is Cable Balancing Efficient i Enough for EMI Mitigation in Data Centers? Dr. Paulo Marin, EE/BSc, MSc, PhD. Electrical Engineer, ICT Consultant What are You going to Learn? What are the potential sources

More information

S. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7

S. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7 Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:

More information

USDA ISO Guide 65 Program Accreditation for Certification Bodies

USDA ISO Guide 65 Program Accreditation for Certification Bodies Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements

More information

NGBASE-T Cabling Requirements

NGBASE-T Cabling Requirements NGBASE-T Cabling Requirements Dr. T. C. Tan, DMTS, CommScope Labs B.Sc (Eng), DIC, PhD, CEng, FIET White paper www.commscope.com Contents Contents Contents 2 1.0 Introduction 3 2.0 IEEE 802.3 NGBASE-T

More information

Cable Sharing: An ANSI & ISO Recognized Solution for High Density, Low-Speed Applications. Robert Y. Faber Jr., RCDD/NTS.

Cable Sharing: An ANSI & ISO Recognized Solution for High Density, Low-Speed Applications. Robert Y. Faber Jr., RCDD/NTS. Cable Sharing: An ANSI & ISO Recognized Solution for High Density, Low-Speed Applications Broadband High-Speed LAN Voice Robert Y. Faber Jr., RCDD/NTS Minimum Port Recommendations TIA/EIA-568-B.1 2 outlets

More information

Mutual Recognition Agreement/Arrangement: General Introduction, Framework and Benefits

Mutual Recognition Agreement/Arrangement: General Introduction, Framework and Benefits Conformity and Interoperability Training for SADC Region on Type Approval testing for Mobile Terminals, Homologation Procedures and Market Surveillance Mutual Recognition Agreement/Arrangement: General

More information

Field-testing procedure. LANmark-6

Field-testing procedure. LANmark-6 Field-testing procedure LANmark-6 Technical Paper Nexans Cabling Solutions September 2006 Table of Contents 1 Introduction 3 2 How to proceed? 4 2.1 Introduction 4 2.2 Permanent link testing vs. Channel

More information

How new testing standards affect you Singapore, Nov 2009

How new testing standards affect you Singapore, Nov 2009 How new testing standards affect you Singapore, Nov 2009 Adrian Young Sr. Customer Support Engineer In this presentation, we will cover How ANSI/TIA-568-C.2 has consolidated all the different test plugs

More information

O p e A n rchitecture

O p e A n rchitecture Open Architecture What is Open Architecture? If you are installing a network infrastructure utilizing fiber optic, Category 5e, 6 or 6A components, there is a sizable selection of well known products available.

More information

IEEE Conformity Assessment Program (ICAP) June12, 2013

IEEE Conformity Assessment Program (ICAP) June12, 2013 IEEE Conformity Assessment Program (ICAP) June12, 2013 Understanding Conformity Assessment Understanding Conformity Assessment What is Conformity Assessment? Conformity Assessment is defined as the process

More information

Plumbing Product Certification WaterMark Level 2

Plumbing Product Certification WaterMark Level 2 NCSI Recognition Booklet Addendum Plumbing Product Certification WaterMark Level 2 1. General In Australia most of the plumbing and drainage products and materials are required to be certified under the

More information

Meeting updated ISO/IEC Your professional partner of structured cabling system

Meeting updated ISO/IEC Your professional partner of structured cabling system Meeting updated ISO/IEC11801 Premium Line Systems Group Premium Line Systems GmbH, Based in Germany, it is the worldwide headquarter 25 Years experience in Cabling and Networking products End-to-End comprehensive

More information

White Paper: Installing Data Networks Using LinkWare Live SaaS

White Paper: Installing Data Networks Using LinkWare Live SaaS White Paper: Installing Data Networks Using LinkWare Live SaaS White Paper: Installing Data Networks Using LinkWare Live SaaS Software as a Service (SaaS) continues to grow in popularity across a wide

More information

Get ready to overachieve.

Get ready to overachieve. Datasheet: DSX-5000 CableAnalyzer The DSX-5000 CableAnalyzer is the copper certification solution and is part of the Versiv cabling certification product family. The Versiv line also includes fiber OLTS

More information

Provided by

Provided by Provided by www.aaatesters.com Datasheet: DSX-5000 CableAnalyzer The DSX-5000 CableAnalyzer is the copper certification solution and is part of the Versiv cabling certification product family. The Versiv

More information

ANSI/TIA/EIA-568-B Cabling Standard

ANSI/TIA/EIA-568-B Cabling Standard 73 ANSI/TIA/EIA-568-B Cabling Standard In the mid-1980s, consumers, contractors, vendors, and manufacturers became concerned about the lack of specifications relating to telecommunications cabling. Before

More information

"IL CABLAGGIO IN RAME DI CATEGORIA 6 E LA CERTIFICA SUL CAMPO DEI PARAMETRI TRASMISSIVI FINO A 250 MHZ"

IL CABLAGGIO IN RAME DI CATEGORIA 6 E LA CERTIFICA SUL CAMPO DEI PARAMETRI TRASMISSIVI FINO A 250 MHZ "IL CABLAGGIO IN RAME DI CATEGORIA 6 E LA CERTIFICA SUL CAMPO DEI PARAMETRI TRASMISSIVI FINO A 250 MHZ" Gli standard per la categoria 6 e i nuovi strumenti di misura maurizio.malinconi@flukenetworks.com

More information

Mosaic TM LCS2 Cat. 6 RJ 45 socket

Mosaic TM LCS2 Cat. 6 RJ 45 socket 870 LIMOGES Cedex Telephone : + 33 0 5 55 06 87 87 - Fax: + 33 0 5 55 06 88 88 Mosaic TM LCS2 Cat. 6 Page 765 61 765 44 765 94 1. General characteristics...1 2. Presentation...2 3. Installation....2 4.

More information

Mosaic TM LCS2 Cat. 6 RJ 45 socket

Mosaic TM LCS2 Cat. 6 RJ 45 socket 870 LIMOGES Cedex Telephone : + 33 0 5 55 06 87 87 - Fax: + 33 0 5 55 06 88 88 Mosaic TM LCS2 Cat. 6 Page 765 61 765 44 765 94 1. General characteristics....1 2. Presentation...2 3. Installation...2 4.

More information

Leveraging the Structured Cabling System for Security Applications. Mark Dearing, RCDD Leviton Network Solutions

Leveraging the Structured Cabling System for Security Applications. Mark Dearing, RCDD Leviton Network Solutions Leveraging the Structured Cabling System for Security Applications Mark Dearing, RCDD Leviton Network Solutions Trends - Cable Category Mix Source: Leviton projections based on market growth rates Over

More information

WireScope 155 SCOPE. Agilent Wirescope 155 Specs Provided by The Performance Leader in Hand-Held Network Tools

WireScope 155 SCOPE. Agilent Wirescope 155 Specs Provided by  The Performance Leader in Hand-Held Network Tools Agilent Wirescope 155 Specs Provided by www.aaatesters.com WireScope 155 Tests installed cabling for compliance with TIA 568A Category 5 and ISO 11801 Class D specifications. Fully implements TIA TSB-67

More information

Deploying NBASE-TTM 2.5G/5GBASE-T Technologies

Deploying NBASE-TTM 2.5G/5GBASE-T Technologies Deploying NBASE-TTM 2.5G/5GBASE-T Technologies George A. Zimmerman, Ph.D., CME Consulting Board of Directors, NBASE-T Alliance Peter Jones, Cisco Systems Chairman, NBASE-T Alliance Masood Shariff, CommScope

More information

10 GIGABIT ETHERNET. 10GBASE-T Physical Layer Interoperability Test Suite Version 1.0. Technical Document. Last Updated: October 3, :30 PM

10 GIGABIT ETHERNET. 10GBASE-T Physical Layer Interoperability Test Suite Version 1.0. Technical Document. Last Updated: October 3, :30 PM . 10 GIGABIT ETHERNET 10GBASE-T Physical Layer Interoperability Test Suite Version 1.0 Technical Document Last Updated: October 3, 2008 2:30 PM 10 Gigabit Ethernet Consortium 121 Technology Drive, Suite

More information

10 GB Ethernet: Copper or Fiber? Choosing the Right Media for the Application

10 GB Ethernet: Copper or Fiber? Choosing the Right Media for the Application 10 GB Ethernet: Copper or Fiber? Choosing the Right Media for the Application Outline Why 10 GB Ethernet? Current Standards Copper Choices Fiber Choices Comparison Summary Why 10 GB Ethernet? Aggregation

More information

40 Gigabit over copper - Thorsten Punke Marketing Manager ANZ TE Connectivity

40 Gigabit over copper - Thorsten Punke Marketing Manager ANZ TE Connectivity 40 Gigabit over copper - 40GBase-T Thorsten Punke Marketing Manager ANZ TE Connectivity IEEE 802.3 Ethernet Update 40GBase-T The history The technical truth The technical history More speed equals to more

More information

Exam Proctoring Procedure Policy Number: Applies to: students, faculty, staff

Exam Proctoring Procedure Policy Number: Applies to: students, faculty, staff Exam Proctoring Procedure Policy Number: 02-70-050 Applies to: students, faculty, staff 1. Policy Statement. The purpose of this policy is to ensure that academic integrity in the completion of exams is

More information

A Model-Based Reference Workflow for the Development of Safety-Related Software

A Model-Based Reference Workflow for the Development of Safety-Related Software A Model-Based Reference Workflow for the Development of Safety-Related Software 2010-01-2338 Published 10/19/2010 Michael Beine dspace GmbH Dirk Fleischer dspace Inc. Copyright 2010 SAE International ABSTRACT

More information

CERTIFICATION ISSUES IN AUTOMOTIVE SOFTWARE

CERTIFICATION ISSUES IN AUTOMOTIVE SOFTWARE CERTIFICATION ISSUES IN AUTOMOTIVE SOFTWARE Speaker: Mario Fusani Systems and Software Evaluation Centre ISTI CNR, Pisa, Italy mario.fusani@isti.cnr.it 1 CONTENTS Certification What is certification? Definitions

More information

AMP-TWIST* 6S Series SL Jack

AMP-TWIST* 6S Series SL Jack Product Specification 108-93003 16/Mar/2011 Rev E AMP-TWIST* 6S Series SL Jack 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, AMP- TWIST*

More information

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision

More information

SPECIFICATION STANDARD COPPER RISER AND INTRABUILDING CABLING

SPECIFICATION STANDARD COPPER RISER AND INTRABUILDING CABLING PART 1: GENERAL 1.01 SCOPE OF WORK A. The Designer and Contractor are responsible to be familiar with the provisions contained herein and with other Sections of this Specification as applicable to the

More information

PEFC N 04 Requirements for certification bodies and accreditation bodies

PEFC N 04 Requirements for certification bodies and accreditation bodies PEFC N 04 Requirements for certification and accreditation Organisation Articles of Association for PEFC Norway Forest certification PEFC N 01 Norwegian PEFC certification system for sustainable forestry

More information

CLi Overview. CLi Program Highlights

CLi Overview. CLi Program Highlights CLi Overview AFL is an industry leader in the development and manufacturing of fiber optic products and services. AFL is the first telecommunications company to offer a lifetime warranty* on end-to-end

More information

MOLEX PREMISE NETWORKS

MOLEX PREMISE NETWORKS MOLEX PREMISE NETWORKS Training Catalog Version 2.2 Bringing Advanced Physical Layer Lifecycle Management to Enterprises Worldwide Copper Fiber Wireless Advanced Physical Layer Management Advanced Physical

More information

ALM120 Application Lifecycle Management 12.0 Essentials Gold Package

ALM120 Application Lifecycle Management 12.0 Essentials Gold Package Course Data Sheet ALM120 Application Lifecycle Management 12.0 Essentials Gold Package Course No: ALM120-120 For software version(s): Software version used in the labs: 12.0 Delivery formats: Instructor

More information

IMPLEMENTATION COURSE (MODULE 1) (ISO 9001:2008 AVAILABLE ON REQUEST)

IMPLEMENTATION COURSE (MODULE 1) (ISO 9001:2008 AVAILABLE ON REQUEST) ISO 9001:2015 IMPLEMENTATION COURSE (MODULE 1) (ISO 9001:2008 AVAILABLE ON REQUEST) COURSE DURATION: 3 DAYS Course Summary: The implementation course provides the participant with an in-depth level of

More information

Sources of Test Reports for TUV SUD BABT Product Certification BABT766. TUV SUD BABT is a certification body of. TUV SUD BABT 2015 Issue 7

Sources of Test Reports for TUV SUD BABT Product Certification BABT766. TUV SUD BABT is a certification body of. TUV SUD BABT 2015 Issue 7 BABT766 Sources of Test Reports for TUV SUD BABT Product Certification TUV SUD BABT is a certification body of TUV SUD BABT 2015 Page 1 of 5 Contents 1 Introduction... 2 2 Background... 2 3 General...

More information

SAP PartnerEdge Program Guide for Authorized Resellers

SAP PartnerEdge Program Guide for Authorized Resellers SAP PartnerEdge Program Guide for Authorized Resellers Table of Contents 3 SAP PartnerEdge Program: Accelerating Your Growth Gain an Edge on Your Competition 5 Program Requirements: How to Become an Authorized

More information

Expected outcomes. for accredited certification to ISO management system standards such as ISO 9001 and ISO 14001

Expected outcomes. for accredited certification to ISO management system standards such as ISO 9001 and ISO 14001 casco for accredited certification to ISO management system standards such as ISO 9001 and ISO 14001 The International Accreditation not control such bodies, but does Forum (IAF) and the International

More information

IMPLEMENTATION COURSE (MODULE 1) (ISO 14001:2004 AVAILABLE ON REQUEST)

IMPLEMENTATION COURSE (MODULE 1) (ISO 14001:2004 AVAILABLE ON REQUEST) ISO 14001:2015 IMPLEMENTATION COURSE (MODULE 1) (ISO 14001:2004 AVAILABLE ON REQUEST) COURSE DURATION: 3 DAYS Course Summary: The implementation course provides the participant with an in-depth level of

More information

AMP-TWIST* Modular Jack, UTP, Category 6A

AMP-TWIST* Modular Jack, UTP, Category 6A Product Specification 5 July 13 Rev A AMP-TWIST* Modular Jack, UTP, Category 6A 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for TE Connectivity*, 6A UTP AMP-

More information

EXAM PREPARATION GUIDE

EXAM PREPARATION GUIDE EXAM PREPARATION GUIDE PECB Certified ISO/IEC 17025 Lead Auditor The objective of the PECB Certified ISO/IEC 17025 Lead Auditor examination is to ensure that the candidate possesses the needed expertise

More information

AQMS AUDITOR APPLICATION GUIDE

AQMS AUDITOR APPLICATION GUIDE AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 10 27 2015 RA 002 AAA UG AQMS Auditor Application User Guide pg. 1 of 22 TABLE OF CONTENTS 1 Introduction... 2 2 Certification

More information

ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles

ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability Session 2: Conformity Assessment Principles 12-16 October 2015 Beijing, China Keith Mainwaring ITU Expert Agenda 1. Context

More information

PROTERRA CERTIFICATION PROTOCOL V2.2

PROTERRA CERTIFICATION PROTOCOL V2.2 PROTERRA CERTIFICATION PROTOCOL V2.2 TABLE OF CONTENTS 1. Introduction 2. Scope of this document 3. Definitions and Abbreviations 4. Approval procedure for Certification Bodies 5. Certification Requirements

More information

History Channel. 10G Ethernet on Copper

History Channel. 10G Ethernet on Copper 10G Ethernet on Copper History Channel Category Cable by Supported Technology Cat 1 - Telephone cable, ISDN Cat 3-10BaseT Cat 5-100BaseTX Cat 5e - 1000BaseT Cat 6-1000BaseT, but what about 10 Gigabit???

More information

BPS Suite and the OCEG Capability Model. Mapping the OCEG Capability Model to the BPS Suite s product capability.

BPS Suite and the OCEG Capability Model. Mapping the OCEG Capability Model to the BPS Suite s product capability. BPS Suite and the OCEG Capability Model Mapping the OCEG Capability Model to the BPS Suite s product capability. BPS Contents Introduction... 2 GRC activities... 2 BPS and the Capability Model for GRC...

More information

IEEE GBASE-T Study Group Closing Plenary Meeting Report

IEEE GBASE-T Study Group Closing Plenary Meeting Report IEEE 802.3 10GBASE-T Study Group Closing Plenary Meeting Report San Francisco, CA July 24, 2003 Brad Booth, Chair bbooth@ieee.org Presentations AbuGhazaleh; Alien NEXT, IL Effect on Channel Capacity Bohbot;

More information

BABT766. Sources of Test Reports for TUV SUD BABT Product Certification. TUV SUD BABT is a certification body of

BABT766. Sources of Test Reports for TUV SUD BABT Product Certification. TUV SUD BABT is a certification body of BABT766 Sources of Test Reports for TUV SUD BABT Product Certification TUV SUD BABT is a certification body of Page 1 of 5 Contents 1 Introduction...2 2 Background...2 3 General...2 4 Laboratories within

More information

Structured Cabling Technology and Market Assessment

Structured Cabling Technology and Market Assessment The Structured Cabling Market Bishop & Associates Inc. has released the new report Structured Cabling Technology and Market Assessment. This report contains in depth analysis of the market for structured

More information

E-DAT C6A. The compact connection system of course with Cat.6A

E-DAT C6A. The compact connection system of course with Cat.6A E-DAT C6A The compact connection system of course with Cat.6A Intelligent system solution for structured cabling Nowadays the need for high data transfer rates is enormous. This not only applies to public

More information

ISO 9001 Auditing Practices Group Guidance on:

ISO 9001 Auditing Practices Group Guidance on: International Organization for Standardization International Accreditation Forum Date: 13 January 2016 ISO 9001 Auditing Practices Group Guidance on: Expected Outcomes The expected outcomes documents (given

More information

Global Specification Protocol for Organisations Certifying to an ISO Standard related to Market, Opinion and Social Research.

Global Specification Protocol for Organisations Certifying to an ISO Standard related to Market, Opinion and Social Research. CONTENTS i. INTRODUCTION 3 ii. OVERVIEW SPECIFICATION PROTOCOL DOCUMENT DEVELOPMENT PROCESS 4 1. SCOPE 5 2. DEFINITIONS 5 3. REFERENCES 6 4. MANAGEMENT STANDARDS FOR APPROVED CERTIFICATION BODIES 6 4.1

More information

RiT SMART Cabling Solution

RiT SMART Cabling Solution Enterprise Solutions RiT SMART Cabling Solution Comprehensive Reliable Advanced End-to-End Cabling Solution The RiT SMART Cabling System offers an extensive range of comprehensive solutions for enterprise

More information

Report. Certificate M6A SIMATIC S7 Distributed Safety

Report. Certificate M6A SIMATIC S7 Distributed Safety Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated

More information

GUIDELINES FOR BODIES OPERATING CERTIFICATION OF QUALITY SYSTEMS FOR DOPING CONTROL PROGRAMS

GUIDELINES FOR BODIES OPERATING CERTIFICATION OF QUALITY SYSTEMS FOR DOPING CONTROL PROGRAMS THE WORLD ANTI-DOPING PROGRAM GUIDELINES FOR ANTI-DOPING ORGANIZATIONS DEVELOPING BEST PRACTICE DOPING CONTROL PROGRAMS GUIDELINES FOR BODIES OPERATING CERTIFICATION OF QUALITY SYSTEMS FOR DOPING CONTROL

More information

SERVICE DESCRIPTION ISO Lex. Certifications

SERVICE DESCRIPTION ISO Lex. Certifications SERVICE DESCRIPTION Lex ISO/IEC 20000-1 INFORMATION TECHNOLOGY - SERVICE MANAGEMENT SYSTEM Companies of any size rely on effective IT service management. No matter where you re based or what you do, your

More information

Requirements for Certification Bodies operating Certification against the PEFC International Chain of Custody Standard

Requirements for Certification Bodies operating Certification against the PEFC International Chain of Custody Standard PEFC INTERNATIONAL STANDARD Requirements for certification users PEFC ST 2003:2012 2012-07-16 Requirements for Certification Bodies operating Certification against the PEFC International Chain of Custody

More information

NGEAB-T Use Cases. Berlin, Germany February Chris DiMinico MC Communications/Panduit

NGEAB-T Use Cases. Berlin, Germany February Chris DiMinico MC Communications/Panduit NGEAB-T Use Cases Berlin, Germany February 2015 Chris DiMinico MC Communications/Panduit cdiminico@ieee.org 1 Scope Next Generation Enterprise Access BASE-T PHY Study Group to define use cases and deployment

More information

CPD ACTIVITY GUIDELINES AND REQUIREMENTS

CPD ACTIVITY GUIDELINES AND REQUIREMENTS Introduction After obtaining the Internal Audit Technician (IAT) and / or Professional Internal Auditor (PIA)* designations, members must maintain their knowledge and skills and stay abreast of improvements

More information

Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010

Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010 Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010 This presentation has not been reviewed or approved by the Commission and may not reflect its views 1 What Products Must

More information

Model-Based Design for Safety Critical Automotive Applications

Model-Based Design for Safety Critical Automotive Applications Model-Based Design for Safety Critical Automotive Applications Mirko Conrad Senior Team Lead Simulink Certification and Standards 2008 The MathWorks, Inc. Model-Based Design for Safety-Critical Applications

More information

International Laboratory Accreditation Cooperation. The ILAC Mutual Recognition Arrangement. global trust. Testing Calibration Inspection

International Laboratory Accreditation Cooperation. The ILAC Mutual Recognition Arrangement. global trust. Testing Calibration Inspection International Laboratory Accreditation Cooperation The ILAC Mutual Recognition Arrangement Enhancing the acceptance of products and services across national borders Removing barriers to global trade Accreditation

More information

Wire pert. Cable Certifier. 1st CAT. e C. Cable Tester of Choice

Wire pert. Cable Certifier. 1st CAT. e C. Cable Tester of Choice 4500 Cable Certifier r tifie r e C e l b a C 8 1st CAT ation z i m i t p o w o fl k Now with wor The WireXpert is the first cable certifier with capability to certify the highest performance cabling systems

More information

Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation

Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria

More information

International Accreditation Forum, Inc. User Advisory Committee UAC

International Accreditation Forum, Inc. User Advisory Committee UAC International Accreditation Forum, Inc. User Advisory Committee UAC UAC Position Paper UAC- N018 Users Expectations of Accreditation, of the Multilateral Recognition Arrangement (MLA) between Accreditation

More information

AQMS AUDITOR AUTHENTICATION BODY AQMS AUDITOR APPLICATION GUIDE

AQMS AUDITOR AUTHENTICATION BODY AQMS AUDITOR APPLICATION GUIDE AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 6 1 2014 TABLE OF CONTENTS 1 Introduction... 2 2 Certification Schemes... 3 3 Certification Grades...

More information

LANmark-7A H i g H - S p e e d C O p p e R S O l u t i O n F O R 4 0 g i g a b i t a p p l i C a t i O n S

LANmark-7A H i g H - S p e e d C O p p e R S O l u t i O n F O R 4 0 g i g a b i t a p p l i C a t i O n S LANmark-7A High-Speed COPPER Solution For 40 Gigabit Applications LANmark-7A High-Speed Copper Solution For 40 Gigabit and Beyond LANmark-7A copper cabling is able to support higher bandwidths and faster

More information

R103 - GENERAL REQUIREMENTS: PROFICIENCY TESTING FOR ISO/IEC LABORATORIES

R103 - GENERAL REQUIREMENTS: PROFICIENCY TESTING FOR ISO/IEC LABORATORIES Page 1 of 8 R103 - GENERAL REQUIREMENTS: PROFICIENCY TESTING FOR ISO/IEC 17025 2018 2018 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means without the

More information

Minimum Scheme Requirements to Certify Criminal Justice Restraints Described

Minimum Scheme Requirements to Certify Criminal Justice Restraints Described This document is scheduled to be published in the Federal Register on 07/13/2017 and available online at https://federalregister.gov/d/2017-14638, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE

More information

Checklist According to ISO IEC 17065:2012 for bodies certifying products, process and services

Checklist According to ISO IEC 17065:2012 for bodies certifying products, process and services Name of Certifying Body Address of Certifying Body Case number Date of assessment With several locations Yes No Assessed locations: (Name)/Address: (Name)/Address: (Name)/Address: Assessed area (technical

More information

2010/SOM3/CTI/WKSP/015rev1 Authorized Economic Operator Pilot Programme of Hong Kong, China

2010/SOM3/CTI/WKSP/015rev1 Authorized Economic Operator Pilot Programme of Hong Kong, China 2010/SOM3/CTI/WKSP/015rev1 Authorized Economic Operator Pilot Programme of Hong Kong, China Submitted by: Hong Kong, China Ease of Doing Business Workshop on Trading Across Borders Sendai, Japan 18-19

More information

ISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation

ISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis

More information

Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY

Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY CONTENTS PAGE Foreword 3 1. Introduction 4 2. Criteria for approval of Certification Body 4 3. Selection of audit team members certifying

More information

ENSURING INTEROPERABILITY FOR OPEN NETWORKING SYSTEMS WHITE PAPER. March 10, 2016

ENSURING INTEROPERABILITY FOR OPEN NETWORKING SYSTEMS WHITE PAPER. March 10, 2016 March 10, 2016 ENSURING INTEROPERABILITY FOR OPEN NETWORKING SYSTEMS WHITE PAPER PRESENTED BY: CHRISTINA DUBE (UNH-CRC), DANIEL GRAY (UNH-IOL), DAVID WOOLF (UNH-IOL) 21 MADBURY RD, SUITE 2 DURHAM, NH 03824

More information

Corrigendum 1 to Amendment 2 1 ISO/IEC ISO/IEC (second edition 2002) Information technology Generic cabling for customer premises

Corrigendum 1 to Amendment 2 1 ISO/IEC ISO/IEC (second edition 2002) Information technology Generic cabling for customer premises Corrigendum 1 to Amendment 2 1 ISO/IEC 11801 ISO/IEC 11801 (second edition 2002) Information technology Generic cabling for customer premises Amendment 2 (2010) CORRIGENDUM 1 Corrigendum 1 applies to Amendment

More information

Federal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure

Federal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure PJLA offers third-party accreditation services to Conformity Assessment Bodies (i.e. Testing and/or Calibration Laboratories, Reference Material Producers, Field Sampling and Measurement Organizations

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies certifying products, processes and services

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies certifying products, processes and services INTERNATIONAL STANDARD ISO/IEC 17065 First edition 2012-09-15 Conformity assessment Requirements for bodies certifying products, processes and services Évaluation de la conformité Exigences pour les organismes

More information

Battery Program Management Document

Battery Program Management Document Battery Program Management Document Revision 5.1 February 2011 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone: 1.202.785.0081

More information

Certification Report

Certification Report Certification Report Symantec Security Information Manager 4.8.1 Issued by: Communications Security Establishment Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government

More information

SYSTIMAX SCS Power Sum Solution

SYSTIMAX SCS Power Sum Solution SYSTIMAX SCS Power Sum Solution Superior Performance for CAT 5 Networks Realize the Full Potential of Your CAT 5 Network... You ve made a significant investment in your data network. Every component meets

More information

20 February Accreditation of Assessment Centres

20 February Accreditation of Assessment Centres 20 February 20 Accreditation of Assessment Centres Policy Name Accreditation of Assessment Centres Document number AAC-001/ Responsible Executive Chief Director: Occupational Qualifications Quality Assurance

More information

LanTEK III FiberTEK III. Certifier for Copper and Fibre Cabling. Proof of Performance

LanTEK III FiberTEK III. Certifier for Copper and Fibre Cabling. Proof of Performance LanTEK III FiberTEK III Certifier for Copper and Fibre Cabling Proof of Performance LanTEK III FiberTEK III The LanTEK III is an easy to use cable certifier that meets existing TIA and ISO/IEC performance

More information

Software Quality Assurance Text and Readings

Software Quality Assurance Text and Readings Software Quality Assurance Text and Readings Hall Ince, D. (1994) ISO 9001 and Software Quality Assurance, McGraw-Hill, London Macfarlane, M. Eating the elephant one bite at a time. McCall et al. (1997)

More information

The AMP NETCONNECT Category 6 Cabling System

The AMP NETCONNECT Category 6 Cabling System The AMP NETCONNECT Category 6 Cabling System 2 Table of Contents TABLE OF CONTENTS...3 PERSPECTIVE...4 WHY INSTALL NEXT GENERATION CABLING SYSTEMS?...4 MEGAHERTZ VS. MEGABITS...4 PLANNING FOR THE FUTURE...5

More information

NZQF Ref 1499 Version 3 Page 1 of 14. This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

NZQF Ref 1499 Version 3 Page 1 of 14. This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF Ref 1499 Version 3 Page 1 of 14 National Diploma in Business (Level 6) Level 6 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. Version

More information

An Overview of ISO/IEC family of Information Security Management System Standards

An Overview of ISO/IEC family of Information Security Management System Standards What is ISO/IEC 27001? The ISO/IEC 27001 standard, published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), is known as Information

More information

SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD V2-1

SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD V2-1 2000 Powell Street, Ste. 600 Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax www.scsglobalservices.com SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD-40-003

More information

Certification Requirements Competency-based Environmental Management Systems (EMS) Certification Program

Certification Requirements Competency-based Environmental Management Systems (EMS) Certification Program Certification Requirements Competency-based Environmental Management Systems (EMS) Certification Program Exemplar Global Personnel Certification Programs Exemplar Global is accredited by the Joint Accreditation

More information

Datasheet: DSX-5000 CableAnalyzer

Datasheet: DSX-5000 CableAnalyzer Datasheet: DSX-5000 CableAnalyzer The DSX-5000 CableAnalyzer is the copper certification solution and is part of the Versiv cabling certification product family. The Versiv line also includes fiber OLTS

More information

ArchiMate Certification for People Training Course Accreditation Requirements

ArchiMate Certification for People Training Course Accreditation Requirements ArchiMate Certification for People Training Course Accreditation Requirements Version 2.0 January 2012 Copyright 2012, The Open Group All rights reserved. No part of this publication may be reproduced,

More information