Reverse PoE Technology

Transcription

1 8- Port Fast Ethernet Reverse PoE Switch Reverse PoE with PoE OUT (24V) Reverse PoE Technology Reverse PoE with Fiber Port POWER OVER ETHERNET FEATURE Switch has intelligent Power management feature solving a major problem of powering the device for ISPs. This switch can be powered using Remote Power from customer end using specially designed reliable NETMODEM from us or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the need to arrange for power at building top and no UPS is needed / no money to be paid to society/power providing customer. This saves lot of MONEY for ISPs and improves service delivery with uninterrupted service to the customer.

2 DESCRIPTION Model IC-1080 is 8 Port 10/100Mbps Switch which is latest generation of fast Ethernet switching technology. It contains 7 Downlink 10/100Base-TX ports (Reverse PoE Ports) plus one UPLINK 10/100BaseT Port (PoE OUT Port, 24V) (Other PoE OUT Voltage available 12V, 48V). Model IC-1071F is 8 Port 10/100Mbps Switch which is latest generation of fast Ethernet switching technology. It contains 7 Downlink 10/100Base-TX ports (Reverse PoE Port) plus one UPLINK 100BaseFX Port (Single Mode, Single Fiber (Bidirectional), 20km, SC Connector) The Switch uses store-and-forward switching to ensure maximum data integrity. The switch supports auto sensing, Auto-Negotiation and IEEE 802.3x Flow Control standard which eliminate packet loss in heavy traffic conditions. All ports also support auto MDI/MDI-X feature, eases the selection of cable type for devices connectivity and provide a completely flexible high performance Non-blocking full wire speed solution. Switch also offers Port Isolation/ Port based VLAN, priority and Broadcast Storm Control features. SMART Traffic Management Features The management features include port-based VLAN/Port Isolation (Can be enabled/disabled using DIP Switch) port security. It also has limited priority feature for providing priority to traffic from three user ports (Port 1,2,3 : Enabled/Disabled using DIP Switch). Switch also supports Broadcast storm control by providing a DIP switch to enable / disable the same. VLAN / Port Isolation Switch works on Intelligent Power Management Feature (IPM), IPM enable switch to source power from customer s Net modem. (Sourced from us or any standard PoE Injector (12V to 24V DC)) under reverse PoE Technology and this eliminates need of any external source for electricity /UPS/Power Providing by Customer. This saves money and creates convenience to the operator (ISP) with uninterrupted service to the customer. Supports Auto-Negotiation Each of the Switch s ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-Blocking Wire Speed The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

3 IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the StarIntelliConnect Series switch offers environmental efficiency. To comply with the IEEE802.3az standard, the Switch provides power saving functionality to reduce energy consumption and save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch s power consumption will be dynamically adjusted according to the link status and the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables and adjust power usage accordingly. The shorter the cable length, the less power it consumes. Easy to Use The Switch IC-10XX is plug-and-play and supports a wide range of network protocols. Installation and network management is quick and straightforward, and clear and convenient LED indicators display easy to read port and switch status. FEATURES & TECHNICAL SPECIFICATIONS Number of Port 8 Port * ( 7 Reverser Poe Port & 1 PoE Out and 1 Fiber Port Out) Depends on Model Ordered Standards IEEE Std BASE-T 10Mbps, Half/Full Duplex; IEEE Std u 100BASE-TX, 10/100Mbps, Half/Full Duplex; IEEE Std x Flow control and Back-pressure. Supports Vlan Protocols Technology MAC Address Network Cable APS, auto-power saving while link-off IEEE 802.3az protocol based power saving PWD, force-off power Saving Port-based VLAN(Can be enabled/ Disabled using DIP Switch) CSMA/CD Store-and-forward architecture filters fragment & CRC error packets 1K MAC address 4-pair UTP/STP Cat 5 cable

4 LEDs Link/Activity per Ethernet port Power: On/Off for Switch Power over Ethernet - IN Injector: Power Supply (IN) for Switch Power over Ethernet 24W on Spare Pair (to supply power to the switch as well as a compatible PoE device (e.g.cpe)). No. Of Ethernet Ports that can Power ON Anyone/All of the seven Downlink Ports the Switch Power OUT to external compatible PoE device Voltage: 8V-24V (On Spare Pair of Uplink Port) Max Power: 18W Ethernet Devices that can be powered Single/Dual* CAT-5 Cable Data Lines Pair 1: Pins 1/2, Pair 2: Pins3/6 CAT-5 Cable Power Lines,+ VDC: Pins 4/5, -VDC: Pins 7/8 Power consumption 2 Watt (For Switch) Operating Temperature Storage environment 0 to 50 C 0 to 75 C Operating Humidity 10% to 90% (non-condensing) *Depends of Model Ordered

5 NETWORK SETUP DIAGRAM IC IC F

6 ORDERING INFORMATION IC x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T PoE Out Port IC-1080P 6x10/100 Base T Reverse PoE (RPoE) & 2 x 10/100 Base T PoE Out Port IC V 7x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T Port & 12V DC Power out IC VP 7x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T PoE Out & 12V DC Power out IC-1071F 7x10/100 Base Reverse PoE (RPoE) & 1 x 10/100 Base FX Port /13T for 1310nmTX nmRX, /15T for 1550nmTX nmRX IC-1071FP 6x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T PoE Out Port & 1 x 10/100 Base FX Port /13T for 1310nmTX nmRX, /15T for 1550nmTX nmRX brijesh@megastar.in A/2, Satellite Apartment, Nr. Kameshwar school, Jodhpur Cross Road, Satellite - Ahmedabad, Gujarat India