AS Remote controlled Antenna switch

Size: px
Start display at page:

Download "AS Remote controlled Antenna switch"

Transcription

1 Remote controlled Antenn switch B-AS1269-PA4.docx User mnul Rev. PA Okt 17 1 of 51

2 Tble of contents Sttement of Conditions... 4 Generl Description... 5 Step by step setup... 6 Hrdwre... 8 Bottom... 8 Top ( under the top cover)... 9 Configurtion with Microbit Setup Mnger FW/HW FW updte Setup Net info Initil IP setup Configurtion with WEB-interfce Set Antenns Inputs Temperture/RH IP Settings Antenn settings Seril Settings Advnced settings Dynmic DNS setting Remoterig dynmic dns service DynDNS dynmic DNSservice Ping Settings Rdio RRC Settings Antenn selection Appliction firmwre upgrde Bootloder firmwre upgrde Restrt device Networks nd Firewlls Portforwrding Appendix D Mnul Antenn Switch Appendix E - Technicl Dt Appendix F - Sfety nd Regultory Informtion B-AS1269-PA4.docx User mnul Rev. PA Okt 17 2 of 51

3 FCC Sttement Sfety Notice Disclimer FCC / CE - Declrtion of conformity B-AS1269-PA4.docx User mnul Rev. PA Okt 17 3 of 51

4 Sttement of Conditions In the interest of improving internl design, opertionl function, nd/or relibility, Microbit 2.0 AB reserves the right to mke chnges to the product described in this document without notice. Microbit does not ssume ny libility tht my occur due to the use or ppliction of the product(s) or circuit lyout(s) described herein. All prts of the softwre re property of Microbit 2.0 AB. The hrdwre design, schemtics PCB lyout, concept, grphics, user mnul, etc. re property of Microbit 2.0 AB. The device my not be disssembled, copied or reversed engineered. Copyright 2010,2011,2012,2013 Microbit 2.0 AB All rights reserved. B-AS1269-PA4.docx User mnul Rev. PA Okt 17 4 of 51

5 Generl Description The Antenn switch is designed specilly to be used for remote (over the Internet) controlled systems, but cn of course be used in other pplictions lso. The switch cn be mnully controlled vi n internl web interfce. The switch is connected to the Internet primrily vi 10 or 100 Mbit Ethernet nd fixed connections like DSL, cble nd WLAN or 3G/4G Mobile systems. The Switch is esily configured vi modern USB nd WEB bsed user interfces. Together with Remoterig RRC-1258 it cn be setup to utomticlly follow your bnd chnges. The switch connects to the RRC over IP, no seril port is needed. It cn be powered with 48V vi the Ethernet cble ccording to the PoE stndrd or with 12 DC. This mens tht the switch cn be plced in tower up to 100m from the schck. The switch is built in stinless steel nd cn be plced outdoor. It s normlly delivered with SO-239 connectors, but cn be ordered with N-connectors, both with PTFE dielectric. B-AS1269-PA4.docx User mnul Rev. PA Okt 17 5 of 51

6 Step by step setup Below follows recommendtion bout how to proceed when setting up the system. 1. Spend some time to red thru this user mnul to get fmilir with the product. 2. Remove the top cover of your Antenn Switch. 3. Check tht the Jumper JMPx is in the EXT position. 4. Apply 12V DC (good stbilized power) to the unit, either vi the 2.1/5,5 DC-jck or vi the screw terminls, (see hrdwre chpter) 5. Connect the unit with CAT5 ptch cbles to the sme Ethernet switch or router s your PC which you will use to setup the system is connected. Do not bother with the cbles through the inlet in the bottom of the Antenn switch until you hve set it up nd tested tht you cn control it vi the webbrowser. 6. Downlod the Microbit Setup Mnger nd the ltest firmwre from to your PC. Follow the instructions bout how to instll the Microbit Setup Mnger (see chpter Configurtion with Microbit Setup Mnger). 7. Find out how your network is configured nd configure the to fit into your network (see chpter Initil IP Setup) with the Microbit Setup Mnger. 8. Check the instlled firmwre version. If the one you downloded from Remoterig is newer, updte the unit with the new firmwre. (see chpter FW/HW bout how to updte). 9. When you hve configured the unit to fit into your network, Strt your Web browser nd connect to the unit by entering the IP-ddress. If you get in contct with the internl web server everything is OK. 10. Mke the bsic softwre configurtion for your system which is described the lter in this user mnul. 11. Nov you hve to decide how you should use the switch. If you should power it vi 12V DC or vi Power over Ethernet. If you will use PoE you cn disconnect your 12V source nd move JMPx on the 1269B pcb to the PoE positon. Connect your LAN cble either to the RJ45 jck mrked LAN or to the screw terminls on the 1269B PCB. Now you cn use the inlet in the bottom of the Switch to mke more permnent instlltion. The screw terminls re mrked with the stndrd colors of CAT5/6 cbles. Be very creful if you use the screw terminls, Interchnging the wire cn dmge both the Antenn switch nd the PoE supply. Microbit do not tke ny responsibility of dmged units or connected equipment. B-AS1269-PA4.docx User mnul Rev. PA Okt 17 6 of 51

7 12. After prepring the cbles connect them to the controlled equipment. Connect the power to ll equipment. Check with your web browser gin tht you re in contct with unit nd cn control the connected equipment. 13. When everything works s it should on your locl network it s time to setup your Internet router so you cn rech the unit from the outside world over the Internet. If you lredy hve other equipment tht you remote control you cn go direct to 14 s you don t need to use seprte Dynmic DNS service. 14. The first thing is to determine if your Internet Service Provider (ISP) re providing you with fixed or dynmic IP-ddress. Fixed IP:s re rre so you probbly hve dynmic IP-ddress if you re not pying extr for fixed one. A dynmic IP is no problem but you need to use dynmic DNS service. You cn use Remoterigs free dynmic DNS service or DynDNS ccount. New DynDNS ccount re no longer free. For detiled informtion bout Dynmic DNS services see the Dynmic DNS chpters under Configurtion with WEB-Interfce. 15. Configure the units Dynmic DNS settings (see chpter Dynmic DNS Setting). 16. Now it s time to configure your remote router. We recommend tht you first enble the remote configuring of your router, you my need it lter. After tht s done configure port forwrding (see chpter Network nd Firewlls). When this is done your remote control unit should be rechble over the Internet. 17. When bck t the Control QTH try to browse to the Dynmic DNS ddress Own host nme you registered nd entered into the remote control unit. You should get in contct with the Antenn Switch internl web server exctly s it ws locl, remember to use :port number fter the dyndns ddress if you hve chnged the webserver port from 80 for exmple Enjoy the remote controlling. B-AS1269-PA4.docx User mnul Rev. PA Okt 17 7 of 51

8 Hrdwre Bottom On the bottom side the ntenn connectors re locted ccording to the pictures bove. The ntenn switch is normlly delivered with SO-239 jck but cn lso be ordered with N connectors. The ventiltor will prevent moisture to build up in the housing. B-AS1269-PA4.docx User mnul Rev. PA Okt 17 8 of 51

9 Top ( under the top cover) To rech the different connectors the top cover hve to be removed. The top cover is secured to the bottom by 8 stinless steel M3 screws. Power The Antenn switch cn be power in three different wys depending on your instlltion. If you instll it indoor or where power is vilble you cn connect 12V DC power direct to the Antenn Switch, if you instll it t the foot of the tower for exmple, Power Over Ethernet cn be hndy to use. 1. Vi the 2.1/5.5 DC jck on the 1216H pcb (see picture). In this cse the JMP should be in the Ext Pwr position. 12V DC B-AS1269-PA4.docx User mnul Rev. PA Okt 17 9 of 51

10 Pin no PWR VDC (centre) - GND 2. Vi the screw terminls on the 1269B pcb (see pictures). In this cse the JMP should be in the Ext Pwr position. The terminls re mrked with + nd Vi 48V Power over Ethernet. In this cse the JMP should be in the PoE position. You cn use seprte PoE Power Injector or use switch with PoE output. In both cses the power should be pplied to the terminls ccording to the info below. The RJ45 LAN jck is hndy to use when setting up the system, while the screw terminls re recommended for permnent instlltion. If you use the RJ45 for permnent use remember to connect the screen to the screw terminl mrked Shield Pin no Screw term Ethernet (RJ45) 1 Ornge/white Out [+] 2 Ornge Out [-] 3 Green/White In [+] 4 Blue + 48V DC 5 Blue /White + 48V DC 6 Green In [-] 7 Brown/White - 48V DC 8 Brown - 48V DC USB The USB-interfce is used to initilly set up the IP prmeters. It cn lso be used for downloding new softwre (cn lso be done vi the WEB-interfce). A USB-cble is included with the product. ETHERNET B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

11 The unit cn be connected to both 10 nd 100 Mbit/s Ethernet bsed TCP/IP network. The Antenn Switch cn be configured for different connection types for Ethernet port, Auto, 10HDX, 10FDX, 100HDX, 100FDX nd Auto-with-preferred-10FDX. Defult is Auto-withpreferred-10FDX which works best in most cses. The Ethernet cble cn be connected vi the RJ45 LAN jck or vi the screw terminls s described under PoE bove. ON LED A Green flshing LED beside the USB connector on the 1216H pcb is indicting norml sttus. STATUS LED A Green flshing LED on the 1269B pcb indictes tht the communiction between the both pcbs re OK. It will flsh fst until the connection is up, nd when everything is OK it chnges to slow flshing (1per/sec). LINK LED A yellow LED besides the Ethernet connector on the 1216H pcb indictes the sttus of the Ethernet interfce LNK Yellow LED indictes link OK, flshing LED indictes trffic B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

12 Configurtion with Microbit Setup Mnger The initil settings of the network prmeters re esiest done with the Microbit Setup Mnger. The Setup Mnger is softwre which runs under Windows on PC nd connects to the ANTENNA SWITCHvi USB (n USB cble is supplied with the ).The Setup Mnger cn be used for: IP Settings nd verifiction o IP-ddress o Netmsk o Gtewy o DNS o DHCP Firmwre upgrde o Appliction o Bootloder o Fctory defult reset Strt with downloding the Microbit Setup Mnger from the homepge Instll the Setup Mnger by following the instructions which shows up. If you hve n older Windows version where Netfrmework 2.0 is not instlled, the instller will guide you through the instlltion of Netfrmework. When you hve finished the instlltion new shortcut to Microbit Setup Mnger will show up on the desktop. Click on the icon to strt Microbit Setup Mnger Connect your AS1269 to 12V nd connect the USB-cble between your computer nd the USB jck on the 1216H pcb. Windows will utomticlly instll the necessry drivers. When it's done the text in the bottom field will chnge from "1216 not connected" to "1216-connected" which is n indiction tht you re in connection with the unit. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

13 FW/HW Click on the "Get" button nd the version of the firmwre will show up in the upper window. Go to the pge nd under downlods you cn find the ltest firmwre. If there is newer firmwre vilble downlod it to your desktop, unzip it. Chnge to the "FW-updte" tb. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

14 FW updte Click on the "Select file" button nd browse to the file with the new firmwre, it should be something like 1216H-CRC_v1.23_ bin depending on the version nd relese dte. When you hve selected the file click on the "Updte" button nd the updte process will strt, the text in the bottom field will chnge to "Updting firmwre". Attention -- Do not interrupt the updte process in ny wy! After bout 1 minute the updte is finished nd the Antenn Switch will restrt. When the text "RC-connected" shows up gin in the lower field of the Microbit Setup Mnger, you cn chnge to the "FW/HW" tb nd check softwre version. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

15 Setup A new window wills pop-up with the bsic IP settings. Chnge the settings so they fit into your locl network nd press the "Sve" button to sve the new settings. The ANTENNA SWITCHwill restrt gin nd when the text "1216-connected" shows up gin in the lower field of the Setup-Mnger, you cn click on the "Setup" button gin to verify the chnges. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

16 Net info Click on the Get button to red the IP setting currently in use by the Switch. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

17 Initil IP setup The defult Ip settings from the fctory is The net msk is , gtewy nd DNS is To be ble to contct the vi the network you must configure the units to fit into your home network. You cn check your network configurtion from your PC. On the strt menu select Run. In the Run dilog box enter cmd. You will get DOS-window. At the DOS-promt enter ipconfig. Then you will get the needed informtion: Your PC IP ddress in this exmple is this mens tht the IP of the must hve IP:s in the re to B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

18 The Netmsk is the Netmsk in the RC-AS1269should be the sme The Defult gtewy the Gtewy nd DNS server(*) in the ANTENNA SWITCHshould be the sme In this cse ll the defult IP setting will be OK. (*) In most cses the Gtewy nd the DNS server is the sme nd the IP of the router. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

19 In nother network, this is the result of the ipconfig commnd. Your PC IP ddress in this exmple is this mens tht the IP of the must hve IP:s in the re to The Netmsk is this the Netmsk in the ANTENNA SWITCHshould be the sme The Defult gtewy is the Gtewy in the should be the sme In this cse you must chnge the IP:s of the RC. Use the Microbit Setup Mnger to chnge the IP settings. Select the Setup tb click on the Get Setup button nd enter the IP ddresses in the Setup info dilog box. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

20 B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

21 Configurtion with WEB-interfce Before you cn use your Antenn switch you must configure it. The unit will hve the defult IP ddresses The net msk is The configurtion is esiest done vi the web interfce. Be wre of tht your PC must be in the sme net e.g. hving n IP-number between nd nd not be the sme s the. If the defult IP-ddress the ANTENNA SWITCHnot fit your network plese use the PC-progrm Microbit Setup Mnger to chnge the IP-ddresses vi USB. Select setup pge from the links on the left side nd edit the prmeters. After ech setup pges is finished press Submit to temporry store the new settings. When you do tht new red Apply chnges button ppers on the pges. You cn now chnge prmeters on other pges but the new settings will not tke effect until you press Apply chnges. When you do tht the unit will reboot nd strt up with the new settings. If you chnge your mind fter clicking on submit you cn click on Restrt device on the left to restrt the device without chnging ny settings. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

22 The info pge shows some sttic informtion bout the Antenn switch s firmwre revision etc. nd lso the bsic IP-configurtion. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

23 Set Antenns The Set Antenn pge is the pge you use for mnul ntenn selections. If you hve connected the switch rdio for utomtic switching you first hve to disble the utomtic selection with the OFF button on the bottom line. Inputs If you hve connected the input to some sensor, you cn se the sttus of the two inputs on this pge. High is indicting open input. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

24 Temperture/RH A 1-wire temp or/nd humidity sensor cn be connected to Bus B, If it s connected you cn see the redings on this pge B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

25 B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

26 IP Settings The IP Settings menu is used to setup the initil IP prmeters needed for the unit to connect to the IP network. Down below the settings re described more in detils. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

27 Prmeter Unit ID (Bnner) DHCP IP Netmsk Gtewy Dns server Web server port Eth-type Setting Text, whtever you wnt, tht will be shown t the top of the web-pge (within brckets). Used to identify different units. empty (defult) text Select between fixed IP ddress nd DHCP. Fixed IP ddress is recommended. No (defult) Yes IP-ddress (only when fixed IP-ddress is used) (defult) nnn.nnn.nnn.nnn Net msk (only when fixed IP-ddress is used) (defult) nnn.nnn.nnn.nnn Gtewy (only when fixed IP-ddress is used) (defult) nnn.nnn.nnn.nnn DNS-ddress (only when fixed IP-ddress is used) (defult) nnn.nnn.nnn.nnn Sets the port number for the Internl webserver. This port number often hs to be chnged if port 80 lredy is used by other equipment. 80 (defult) Type of Ethernet connection: Auto Auto, prefer 10 Mbit (defult) 10HDX* 10FDX* 100HDX* 100FDX* Auto prefer 10 Mbit is defult s more speed is not needed nd the emissions from 10 Mbit LAN is much less thn from 100 Mbit LAN (*) If you use fixed settings you must hve mnged switch where you cn set the sme setting. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

28 Web pge user Web pge pwd Enble pssword protection for the web by entering usernme (this field) nd pssword (next field). If this field is empty the ANTENNA SWITCHwill not sk for pssword. Some of the pges re still ccessible but no editing is possible. empty (defult) usernme Pssword for the web pges nd telnet connection. empty (defult) pssword B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

29 Antenn settings At the Antenn settings pge you cn enter text string which describe the ntenn you hve connected to the ntenn ports. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

30 Seril Settings The Antenn switch cn tlk direct to rdio CAT port lso if the seril dpter 1216R is connected to the pin heder P1. The seril prmeters re set on the Seril pge. This settings hs no effect when you hve connected the Antenn switch to the RRC over IP B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

31 Advnced settings On the Advnced settings pge you hve to select which protocol you will use depending on your rdio. You cn select some modes which only listen nd do not send ny questions. Elecrft K3 uses the Yesu settings. This setting re used both for control vi the seril port nd over IP. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

32 When connection to ICOM rdio you must know the CI-V Address (hex) the rdio re set to. In the exmple below the switch is connected to rig with CI-V ddress 66. The Contr. Address sets the CI-V ddress of the ntenn switch it self. If you hve more thn one equipment which is controller you my hve to chnge the ddress to different one. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

33 Dynmic DNS setting The Antenn Switch hs Dynmic DNS client to be used when the Internet Service Provider (ISP) uses dynmic IP ddresses insted of fixed IP ddress. The supports our own free Remoterig dynmic DNS service nd DynDNS which is not free for new users nymore. You cn choose to use one of them. The Dynmic DNS client checks wht IP ddress your router hs got from the ISP nd sends the informtion to the Dynmic DNS:s service DNS server. When using Dynmic DNS you enter "Own host nme" insted of n IP ddress in the web browser nd you don't need to bother if the IP ddress t the Remote site chnges. If you lredy hve Dynmic DNS ccount registered for ny equipment connected to the sme router t the remote site, you do not need to register ny specific for the AS B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

34 Remoterig dynmic dns service The Remoterig dynmic dns service only support equipment from Remoterig nd Microbit like this Antenn switch, the RC-1216H, the RRC-1258 nd the WebSwitch 1216H etc. The Remoterig dynmic dns service do not need ny registrtion it s utomticlly generted bsed on the seril number on the equipment. To ctivte the Remoterig dynmic dns client select ddns.webswitch.se from the drop down on the Dynmic DNS settings pge. Also select DNS check intervl, if your IP ddress chnge often you cn select low vlue, if it goes month between the chnges you cn select higher vlue. After tht click on Submit nd Apply chnges, the will restrt. After the switch hs restrted go bck to the Dynmic DNS settings pge. You will now see tht the settings Own hostnme, Usernme nd Pssword re utomticlly generted. The B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

35 only importnt informtion is the Own host nme, copy the whole row, this is the informtion you should put into your web browsers ddress field when you contct the unit in the future. Store it s Bookmrk s it is difficult to remember. No more registrtion is needed. Remember tht DNS ddress like this is only for use when you connect over the internet, s long s you re operting on you own LAN use the IP ddress. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

36 DynDNS dynmic DNSservice The Antenn Switch lso supports the commercil dynmic DNS service DynDns. Erlier this ws free service, it s still free for old users but not for new. If your router hs DynDNS client you cn lso use tht one, nd do not ctivte more thn one DynDNS client t the sme LAN segment. DynDNS do not ccept multiple updtes from sme IP. The DynDNS client checks wht IP ddress your router hs got from the ISP nd sends the informtion to DynDNS:s DNS server. When using DynDNS you enter "Own host nme" insted of n IP ddress in we browsers ddress field nd you don't need to bother if the IP ddress t the remote QTH chnges. You need to register n ccount t nd get domin nme. There re other providers of the sme service but only supports DynDNS or Remoterig ddns. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

37 Prmeter Dynmic DNS check intervl Dynmic DNS host nme Own host nme Usernme Pssword Setting Sets how often the externl IP ddress of your router should be checked, vlue in minutes: Off (Dynmic DNS client disbled) Sets which DNS service you will use ddns.remoterig.com (our own free service) members.dyndns.org (commercil service) Domin nme registered t DynDNS.com. Exmple: my-rdio-site.hm-rdio-op.net Dynmic DNS ccount usernme. Dynmic DNS ccount pssword. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

38 Ping Settings The Antenn switch hs Ping Wtchdog function which cn be used s n extr security. This function is quite common in network equipment. It cn be set to ping n IP ddress nd when it does not get ny nswer, it will mke hrd reboot of the unit. The sttus of the ping wtchdog cn be checked t the sttus pge. If you use this function, be sure tht the IP-ddress you hve chosen to ping is IP-ddress which is lwys rechble. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

39 Enble ping wtchdog IP ddress to ping Ping Intervl (seconds) Strtup dely (seconds) Filure count to reboot Enbles the function. No = Function is disbled Yes, test = Function enbled but it will not ctully reboot, cn be used for test Yes, reboot = Function is enbled. IP ddress to ping is entered here, In norml cses use the Gtewy IP. Intervl between the ping is sent. ( , defult 300 s) Dely before the first ping is sent. ( ), defult 300 s. If Test mode is ctivted it cn be set to Sets how mny times the ping is llowed to fil before reboot is done. (1-255, defult 3 ) B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

40 Rdio RRC Settings At the Rdio RRC settings pge you setup the connection to the Rdio-RRC if you wnt the Antenn switch to tlk to the rdio vi the RRC. Note the RRC must be connected to the rdio CAT port vi COM2 if it should work. Ip number nd port should mtch the settings in the Rdio-RRC. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

41 Antenn selection At the ntenn selection pge you cn decide which ntenn you wnt to use t different frequencies. First select which ntenns you wnt to be utomticlly selected on the bottom line. Then you cn enter the frequency rnges in the boxes to the left, nt mrk which ntenn port you wnt to be ctive for ech rnge. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

42 If you wnt the ntenns to be deselected eg. grounded, fter while when the rdio is switched off nd the switch get no nswers on frequency requests, you cn set Disconnect timeout. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

43 Appliction firmwre upgrde The ppliction firmwre cn be updted over the Internet vi the web interfce when bugs re fixed nd/or new functionlity is implemented. You don't hve to be where the Antenn Switch is locted to do the updtes. Downlod the new firmwre from nd sve the file on your computer (it hs nme like 1216H-CRC_v1.38_ bin). Connect to the Antenn switch nd select 'Appliction-upgrde'. Then click on the 'Browse' button nd select the file with the new firmwre. After tht you click on the 'Upgrde' button nd the new firmwre will be trnsferred nd sved into the RC. When the firmwre is updted the Antenn Switch restrt. Note -- Do not interrupt the upgrde process in ny wy. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

44 Wit minute or two then connect to the Antenn switch gin nd select 'Info' nd verify tht the Softwre version is updted. If it looks like its not updted empty the web browser cche, to prevent it from showing n old cched pge. The updte NEVER fils but the browser is common problem. Bootloder firmwre upgrde This follows the sme steps s the ppliction firmwre upgrde procedure bove. Restrt device Restrt device cn be used if you wnt to reset nd restrt the Antenn Switch without sving ny chnges (before pply chnges) or just for ordinry reset. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

45 Networks nd Firewlls One of the mjor obstcles when trying to remotely control something is the fct tht the Internet Service Provider (ISP) forces us to use dynmic IP ddresses. We cn never know, from time to time, which IP ddress our modem / firewll / router hs on its outside interfce (the IP ddress you will try to connect to). Most people use NAT routers tht trnsltes IP ddresses on the inside (your little LAN) to one common IP ddress on the outside using port conversion. At the remote end the router must be configured so tht port 80 (defult settings) is directed to the Antenn switch which should hve sttic IP ddress. If you hve other remote controlled equipment connected to the router port 80 is probbly lredy in use nd you need to chnge the webserver port from 80 to something else. In the exmple below where we hve setup the Linksys router we hve used port If you do not hve fixed IP from your Internet Service provider you will probbly lso need to use dynmic dns service (see erlier chpter bove) so you cn use host nme insted of IP-ddress when you browse the unit. If you lredy hve dynmic dns service in use for ny equipment connected to the sme router, you do not need to hve ny specific service for the Antenn Switch. The following defult IP ports re used (chngeble) port number function 80 WEB interfce WEB interfce re TCP-bsed. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

46 Portforwrding A typicl setup screen for ctivting port forwrding is shown below. There is one row ssigned for ech port (service) ll refereeing to the IP of the Rdio-RRC nd the t the 5 th row. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

47 Appendix D Mnul Antenn Switch There is mnully controlled version lso vilble where the ntenn relys re controlled by grounding connection in socket. No utomtic functions or network connections re vilble. The RF-specifictions re the sme s for the utomtic version. On the picture to the right the 12-position socket re shown where the control cble re connected. + 12V re common nd ech ntenn is controlled by grounding resp. input t the socket. There is extr ground connection lso mrked GND. Note tht the Antenn port numbering is different from the picture shown on pge 8 B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

48 B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

49 Appendix E - Technicl Dt Product/Art no: Antenn Switch Frequency Rnge: 1,6-55 MHz Chrcteristic impendnce: 50 ohm Outputs:(*1) 10 Inputs: 1 Supply voltge PoE (IEEE802.3f): 48V Supply voltge Locl: 12-15V Power consumption PoE: 60 ma Power consumption Locl: <200 ma Connectors: PTFE dielectric N or SO-239 SWR ( MHz): <1.1:1 Insert loss ( MHz): <0.03 db Insert loss (50 MHz): <0.05 db Power rting ( MHz, SWR <1.3:1) 5kW Power rting ( MHz, SWR <2:1) 2.5kW Power rting ( MHz, SWR <3:1) 1.5kW Ethernet connection(*2): RJ45 or 10 pos terminl Mst clmps: Stinless Steel 51mm Operting temp: C Dimensions (WxDxH): 200x155x140mm Weight: 2.1 Kg (*1) All unused ntenn outputs re grounded, The RF crd control lines re surge protected with Metl Oxide Vristors (*2) The control cble should be shielded (FTP) CAT-5e or better. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

50 Appendix F - Sfety nd Regultory Informtion FCC Sttement This device complies with Prt 15 of the FCC Rules. Opertion is subject to the following two conditions: This device my not cuse hrmful interference. This device must ccept ny interference received, including interference tht my cuse undesired opertion. This equipment hs been tested nd found to comply with the limits for Clss B digitl device, pursunt to prt 15 of the FCC Rules. These limits re designed to provide resonble protection ginst hrmful interference in residentil instlltion. This equipment genertes, uses, nd cn rdite rdio frequency energy nd, if not instlled nd used in ccordnce with the instructions, my cuse hrmful interference to rdio communictions. However, there is no gurntee tht interference will not occur in prticulr instlltion. If this equipment does cuse hrmful interference to rdio or television reception, which cn be determined by turning the equipment off nd on, the user is encourged to try to correct the interference by one or more of the following mesures: Reorient or relocte the receiving ntenn. Increse the seprtion between the equipment nd receiver. Connect the equipment into n outlet on circuit different from tht to which the receiver is connected. Consult the deler or n experienced rdio/tv technicin for help. FCC Cution: Any chnges or modifiction not expressly pproved by the prty responsible for complince could void the user s uthority to operte the equipment. Sfety Notice Do not use this product ner wter, for exmple, in wet bsement or ner swimming pool. Avoid using this product during n electricl storm. There my be remote risk of electric shock from lightning. Wrning: Never operte this device with hedset or other udio ccessories t high volume levels. Hering expert s dvice ginst continuous high volume opertion, if you experience ringing in your ers, reduce the volume level or discontinue use. Never connect power supply of more thn 18 VDC to the power jck. The supply voltge must be between 10 V nd 18 V. to prevent dmging the device. B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

51 Disclimer The uthor hs written this document to the best of his knowledge, but does not gurntee tht the contents will stisfy the desire nd expecttion of the reder. The uthor or Microbit tkes no responsibility for dmge or injuries of ny kind tht my rise from the use nd miss use of the product or informtion contined. The uthor do not wrrnt the ccurcy nd correctness of the informtion contined. All brnd nd nmes mentioned re trdemrks or registered trdemrks of their respective holders. FCC / CE - Declrtion of conformity Appendix F - Contct Informtion Support site E-mil info@microbit.se Web site Phone B-AS1269-PA4.docx User mnul Rev. PA Okt of 51

RC-1216H. Web based remote control for. SteppIR, ACOM-2000A and Rotators

RC-1216H. Web based remote control for. SteppIR, ACOM-2000A and Rotators Web bsed remote control for SteppIR, ACOM-2000A nd Rottors User Mnul B-RC1216H-PA7 User mnul Rev. PA7 2013 April 23 1 of 57 Tble of contents Sttement of Conditions... 4 Generl Description... 5 Step by

More information

RRC-1258 MkII(s) and RRC-1258MkIIs Yaesu Twin

RRC-1258 MkII(s) and RRC-1258MkIIs Yaesu Twin RRC-5 MkII(s) nd RRC-5MkIIs Yesu Twin User Mnul B5B_RemoteRig_MkIIs-A User mnul Rev. A5 0 Nov 0 of 9 Tble of contents Sttement of Conditions... Generl Description... 7 Detchble control pnel... 7 PC-bsed

More information

RRC-1258 MkII(s) m crob t. Yaesu Twin, Elecraft K3-Twin etc. User Manual USER MANUAL RRC-1258 MKII. User manual Rev. A feb 27 1 of 247

RRC-1258 MkII(s) m crob t. Yaesu Twin, Elecraft K3-Twin etc. User Manual USER MANUAL RRC-1258 MKII. User manual Rev. A feb 27 1 of 247 RRC-25 MkII(s) Yesu Twin, Elecrft K3-Twin etc. User Mnul B25B_RemoteRig_MkIIs-A3.docx User mnul Rev. A3 207 feb 27 of 247 Tble of contents Sttement of Conditions... 7 Generl Description... Detchble control

More information

McAfee Network Security Platform

McAfee Network Security Platform Mnger Applince Quick Strt Guide Revision B McAfee Network Security Pltform This guide is high-level description of how to instll nd configure the Mnger Applince. For more detiled instlltion informtion,

More information

RRC-1258 MkII(s) m crob t. Yaesu Twin, Elecraft K3-Twin etc. User Manual USER MANUAL RRC-1258 MKII. User manual Rev. A Feb 17 1 of 229

RRC-1258 MkII(s) m crob t. Yaesu Twin, Elecraft K3-Twin etc. User Manual USER MANUAL RRC-1258 MKII. User manual Rev. A Feb 17 1 of 229 RRC-25 MkII(s) Yesu Twin, Elecrft K3-Twin etc. User Mnul User mnul Rev. A30 204 Feb 7 of 229 Tble of contents Sttement of Conditions... 7 Generl Description... Detchble control pnel... 9 PC-bsed control...

More information

Information regarding

Information regarding Informtion regrding LANCOM Advnced VPN Client 3.13 Copyright (c) 2002-2017 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured

More information

EasyMP Network Projection Operation Guide

EasyMP Network Projection Operation Guide EsyMP Network Projection Opertion Guide Contents 2 Introduction to EsyMP Network Projection EsyMP Network Projection Fetures... 5 Disply Options... 6 Multi-Screen Disply Function... 6 Movie Sending Mode...

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 Introduction to EsyMP Multi PC Projection 5 EsyMP Multi PC Projection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters

More information

Epson iprojection Operation Guide (Windows/Mac)

Epson iprojection Operation Guide (Windows/Mac) Epson iprojection Opertion Guide (Windows/Mc) Contents 2 Introduction to Epson iprojection 5 Epson iprojection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters nd Projection

More information

Release Notes for. LANCOM Advanced VPN Client 4.10 Rel

Release Notes for. LANCOM Advanced VPN Client 4.10 Rel Relese Notes for LANCOM Advnced VPN Client 4.10 Rel Copyright (c) 2002-2018 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured

More information

Installation Guide AT-VTP-800

Installation Guide AT-VTP-800 Velocity 8 Touch Pnel The Atlon -BL nd -WH re 8 touch pnels in blck nd white, respectively, for the Atlon Velocity Control System. They feture contemporry, refined styling for modern presenttion environments

More information

Simrad ES80. Software Release Note Introduction

Simrad ES80. Software Release Note Introduction Simrd ES80 Softwre Relese 1.3.0 Introduction This document descries the chnges introduced with the new softwre version. Product: ES80 Softwre version: 1.3.0 This softwre controls ll functionlity in the

More information

pdfapilot Server 2 Manual

pdfapilot Server 2 Manual pdfpilot Server 2 Mnul 2011 by clls softwre gmbh Schönhuser Allee 6/7 D 10119 Berlin Germny info@cllssoftwre.com www.cllssoftwre.com Mnul clls pdfpilot Server 2 Pge 2 clls pdfpilot Server 2 Mnul Lst modified:

More information

Epson Projector Content Manager Operation Guide

Epson Projector Content Manager Operation Guide Epson Projector Content Mnger Opertion Guide Contents 2 Introduction to the Epson Projector Content Mnger Softwre 3 Epson Projector Content Mnger Fetures... 4 Setting Up the Softwre for the First Time

More information

STRM Installation Guide

STRM Installation Guide Security Thret Response Mnger Relese 2013.2 Juniper Networks, Inc. 1194 North Mthild Avenue Sunnyvle, CA 94089 USA 408-745-2000 www.juniper.net Published: 2014-09-15 Copyright Notice Copyright 2014 Juniper

More information

Welch Allyn CardioPerfect Workstation Installation Guide

Welch Allyn CardioPerfect Workstation Installation Guide Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.6 or lter For network instlltion, plese refer to

More information

LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION

LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION Overview LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION 4.3.1.0 Due to the complex nture of this updte, plese fmilirize yourself with these instructions nd then contct RGB Spectrum

More information

License Manager Installation and Setup

License Manager Installation and Setup The Network License (concurrent-user) version of e-dpp hs hrdwre key plugged to the computer running the License Mnger softwre. In the e-dpp terminology, this computer is clled the License Mnger Server.

More information

Passwords Passwords Changing Passwords... <New Passwords> 130 Setting UIM PIN... <UIM PIN/UIM PIN2> 130 Unlocking a Locked UIM...

Passwords Passwords Changing Passwords... <New Passwords> 130 Setting UIM PIN... <UIM PIN/UIM PIN2> 130 Unlocking a Locked UIM... Psswords Psswords... 128 Chnging Psswords... 130 Setting UIM PIN... 130 Unlocking Locked UIM... 131 Restricting the Hndset Opertions Locking Function... 131 Locking the

More information

EasyMP Network Projection Operation Guide

EasyMP Network Projection Operation Guide EsyMP Network Projection Opertion Guide Contents 2 About EsyMP Network Projection Functions of EsyMP Network Projection... 5 Vrious Screen Trnsfer Functions... 5 Instlling the Softwre... 6 Softwre Requirements...6

More information

LCI/USB LonWorks Commissioning Interface

LCI/USB LonWorks Commissioning Interface Works Commissioning Interfce Importnt: Retin these instructions CONTENTS 1 Unpcking... 1 2 Storing... 1 3 Instlltion... 1 4 Uninstlling the USB Drivers... 8 5 Disposl... 8 1 UNPACKING Instlltion Instructions

More information

File Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment

File Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment File Mnger Quick Reference Guide June 2018 Prepred for the Myo Clinic Enterprise Khu Deployment NVIGTION IN FILE MNGER To nvigte in File Mnger, users will mke use of the left pne to nvigte nd further pnes

More information

NOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application.

NOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application. ICB Asset Ticket Genertor Opertor s Guide Septemer, 2016 Septemer, 2016 NOTES Opertor s Guide ICB Asset Ticket Genertor Softwre Instlltion nd Opertion This document contins informtion for downloding, instlling,

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 About EsyMP Multi PC Projection Meeting Styles Proposed by EsyMP Multi PC Projection... 5 Holding Meetings Using Multiple Imges... 5 Holding Remote Meetings

More information

Deposit a Technical Report in PubRep

Deposit a Technical Report in PubRep Technicl in Lst Updte:19.12.016 Te c h n i c l Technicl s re mjor source of scientific informtion, prepred for institutionl nd wider distribution. They re considered grey literture since they re scientific

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 About EsyMP Multi PC Projection Meeting Styles Proposed by EsyMP Multi PC Projection... 5 Holding Meetings Using Multiple Imges... 5 Holding Remote Meetings

More information

McAfee Network Security Platform

McAfee Network Security Platform NTBA Applince T-200 nd T-500 Quick Strt Guide Revision B McAfee Network Security Pltform 1 Instll the mounting rils Position the mounting rils correctly nd instll them t sme levels. At the front of the

More information

Release Notes for. LANtools Software Release RU6

Release Notes for. LANtools Software Release RU6 Relese Notes for LANtools Softwre Relese 10.12 RU6 Copyright (c) 2002-2018 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured

More information

Before you start to install your G-Boost cellular signal booster, please take a minute to go through the following reminders:

Before you start to install your G-Boost cellular signal booster, please take a minute to go through the following reminders: Wuhn Gewei Electronic Technologies Co., Ltd G-Boost Cellulr Signl Booster User s Mnul Wuhn Gewei Electronic Technologies Co. Ltd. Introduction Mny of us re bothered by dropped clls, slow network connections

More information

McAfee Network Security Platform

McAfee Network Security Platform 10/100/1000 Copper Active Fil-Open Bypss Kit Guide Revision E McAfee Network Security Pltform This document descries the contents nd how to instll the McAfee 10/100/1000 Copper Active Fil-Open Bypss Kit

More information

E201 USB Encoder Interface

E201 USB Encoder Interface Dt sheet Issue 4, 24 th ugust 2015 E201 USB Encoder Interfce E201-9Q incrementl E201-9S bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce

More information

Installation Instructions for the TBVL Valve Set GOLD/COMPACT

Installation Instructions for the TBVL Valve Set GOLD/COMPACT Instlltion Instructions for the TBVL Vlve Set GOLD/COMPACT. Generl The TBVL vlve set is set of components for controlling n ir heter/ir cooler nd consists of ()-wy vlve, vlve ctutor, connection cble with

More information

LoRaWANTM Concentrator Card Mini PCIe LRWCCx-MPCIE-868

LoRaWANTM Concentrator Card Mini PCIe LRWCCx-MPCIE-868 Dt Sheet LoRWANTM Concentrtor Crd Mini PCIe LRWCCxMPCIE868 LoRWANTM Concentrtor Crd bsed on Semtech SX30 nd SX308 Chips in Mini PCIe Form Fctor The nfuse LRWCCxMPCIE fmily of crds enble OEMs nd system

More information

Installation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English

Installation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English Instlltion mnul Dikin Altherm low temperture monobloc option box EKCB07CAV Instlltion mnul Dikin Altherm low temperture monobloc option box English Tble of Contents Tble of Contents About the documenttion.

More information

How to Design REST API? Written Date : March 23, 2015

How to Design REST API? Written Date : March 23, 2015 Visul Prdigm How Design REST API? Turil How Design REST API? Written Dte : Mrch 23, 2015 REpresenttionl Stte Trnsfer, n rchitecturl style tht cn be used in building networked pplictions, is becoming incresingly

More information

the printer and check the components

the printer and check the components Quick Setup Guide Strt Here (EU only) HL-3040CN Before you cn use the printer, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit

More information

vcloud Director Service Provider Admin Portal Guide vcloud Director 9.1

vcloud Director Service Provider Admin Portal Guide vcloud Director 9.1 vcloud Director Service Provider Admin Portl Guide vcloud Director 9. vcloud Director Service Provider Admin Portl Guide You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/

More information

pdftoolbox Server 4 Manual

pdftoolbox Server 4 Manual pdftoolbox Server 4 Mnul Mnul Pge 2 Mnul Lst modified: 27 Februry 2009 2009 by clls softwre gmbh, Berlin, Germny All rights reserved All trdemrks re the property of their respective owners. Mnul Pge Content

More information

Engineer To Engineer Note

Engineer To Engineer Note Engineer To Engineer Note EE-169 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit

More information

vcloud Director Tenant Portal Guide vcloud Director 9.1

vcloud Director Tenant Portal Guide vcloud Director 9.1 vcloud Director Tennt Portl Guide vcloud Director 9.1 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments bout this documenttion, submit

More information

MULTIPLE INTERFACE SHAFT ENCODER MODEL OPERATIONS & MAINTENANCE MANUAL

MULTIPLE INTERFACE SHAFT ENCODER MODEL OPERATIONS & MAINTENANCE MANUAL MULTIPLE INTERFACE SHAFT ENCODER MODEL 56-0540 OPERATIONS & MAINTENANCE MANUAL Prt No. 8800-1137 Revision - B 7-Oct-04 Sutron Corportion 21300 Ridgetop Circle Sterling, VA 20166 (703)406-2800 (703)406-2801

More information

CKX-CCSW Confluency checker INSTRUCTIONS. Software for research/education This software is designed to use in research and or education fields.

CKX-CCSW Confluency checker INSTRUCTIONS. Software for research/education This software is designed to use in research and or education fields. INSTRUCTIONS Confluency checker NOTE: This instruction mnul is for the Olympus confluency checker. To ensure the sfety, obtin optimum performnce nd to fmilirize yourself fully with the use of this softwre,

More information

IZT DAB ContentServer, IZT S1000 Testing DAB Receivers Using ETI

IZT DAB ContentServer, IZT S1000 Testing DAB Receivers Using ETI IZT DAB ContentServer, IZT S1000 Testing DAB Receivers Using ETI Appliction Note Rel-time nd offline modultion from ETI files Generting nd nlyzing ETI files Rel-time interfce using EDI/ETI IZT DAB CONTENTSERVER

More information

Engineer To Engineer Note

Engineer To Engineer Note Engineer To Engineer Note EE-188 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit

More information

Printing for Professionals

Printing for Professionals Printing for Professionls Quick Setup Guide Version 0 USA/CAN Quick Setup Guide Strt Here Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. IMPORTANT DO NOT

More information

OPERATION MANUAL. DIGIFORCE 9307 PROFINET Integration into TIA Portal

OPERATION MANUAL. DIGIFORCE 9307 PROFINET Integration into TIA Portal OPERATION MANUAL DIGIFORCE 9307 PROFINET Integrtion into TIA Portl Mnufcturer: 2018 burster präzisionsmesstechnik gmbh & co kg burster präzisionsmesstechnik gmbh & co kg Alle Rechte vorbehlten Tlstrße

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.2.5 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss nd the Zenoss logo re trdemrks

More information

Setup Guide. Before Setting Up the Printer

Setup Guide. Before Setting Up the Printer Introduction Cution Series Series Setup Guide Series Introductory Informtion Instructions in this Setup Guide show the ipf840 printer. Note tht your printer my look different from these illustrtions in

More information

JCM TRAINING OVERVIEW DBV Series DBV-500 Banknote Validator

JCM TRAINING OVERVIEW DBV Series DBV-500 Banknote Validator November, 2016 JCM TRAINING OVERVIEW DBV Series DBV-500 Bnknote Vlidtor Phone (800) 683-7248 (702) 651-0000 Fx (702) 651-0214 E-mil support@jcmglobl.com www.jcmglobl.com 1 DBV-500 Bnknote Vlidtor Tble

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision D McAfee Network Security Pltform (NS5x00 Quick Strt Guide) This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS5100 nd NS5200 Sensors in inline

More information

COMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA:

COMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA: In order to lern which questions hve een nswered correctly: 1. Print these pges. 2. Answer the questions. 3. Send this ssessment with the nswers vi:. FAX to (212) 967-3498. Or. Mil the nswers to the following

More information

Zenoss Service Impact Installation and Upgrade Guide for Resource Manager 5.x and 6.x

Zenoss Service Impact Installation and Upgrade Guide for Resource Manager 5.x and 6.x Zenoss Service Impct Instlltion nd Upgrde Guide for Resource Mnger 5.x nd 6.x Relese 5.3.1 Zenoss, Inc. www.zenoss.com Zenoss Service Impct Instlltion nd Upgrde Guide for Resource Mnger 5.x nd 6.x Copyright

More information

TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column

TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA APRIL 2011 If your STRM Console is configured to integrte with the Juniper JunOS Pltform DSM, STRM cn receive, process, nd store Pcket Cpture (PCAP) dt from

More information

Migrating vrealize Automation to 7.3 or March 2018 vrealize Automation 7.3

Migrating vrealize Automation to 7.3 or March 2018 vrealize Automation 7.3 Migrting vrelize Automtion to 7.3 or 7.3.1 15 Mrch 2018 vrelize Automtion 7.3 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments bout

More information

JCM TRAINING OVERVIEW ivizion Banknote Acceptor

JCM TRAINING OVERVIEW ivizion Banknote Acceptor ivizion Bnknote Acceptor JCM Trining Overview Februry, 2018 Februry, 2018 ivizion-100 Prts List Prt Number - Description 701-000269R ivizion/uba Power Supply 701-100112R ivizion/tbv UAC Kit (lternte power

More information

vcloud Director Tenant Portal Guide vcloud Director 9.0

vcloud Director Tenant Portal Guide vcloud Director 9.0 vcloud Director Tennt Portl Guide vcloud Director 9.0 vcloud Director Tennt Portl Guide You cn find the most up-to-dte technicl documenttion on the VMwre We site t: https://docs.vmwre.com/ The VMwre We

More information

NetBackup 5200 Release 1.1 Quick Installation Guide

NetBackup 5200 Release 1.1 Quick Installation Guide NetBckup 5200 Relese 1.1 Quick Instlltion Guide Revision: 01 Dte: 2010-08-30 Environment Check Before Instlltion You cn instll the NetBckup 5200 pplince in stndrd 19-inch cbinet (with n AC distribution

More information

Engineer To Engineer Note

Engineer To Engineer Note Engineer To Engineer Note EE-186 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit

More information

Sage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018

Sage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018 Sge CRM 2018 R1 Softwre Requirements nd Mobile Fetures Updted: My 2018 2018, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The Sge

More information

Setup Guide. * Values enclosed in [ ] are for when the stand is attached. ipf650/ipf655. ipf750/ipf755. d. 3-inch paper core attachment L

Setup Guide. * Values enclosed in [ ] are for when the stand is attached. ipf650/ipf655. ipf750/ipf755. d. 3-inch paper core attachment L Introductory Informtion Setup Guide ENG Red this mnul before ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Introduction Cution Instructions in this Setup Guide show

More information

GXR-GPS GXR-GPS-485 User Manual

GXR-GPS GXR-GPS-485 User Manual GXR-GPS GXR-GPS-485 User Mnul GeoSIG Ltd, Wiesenstrsse 39, 8952 Schlieren, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com Pge ii Document Revision GS_GXR_GPS_User_Mnul_V05.doc

More information

Engineer To Engineer Note

Engineer To Engineer Note Engineer To Engineer Note EE-208 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit

More information

Sage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017

Sage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017 Sge CRM 2017 R2 Softwre Requirements nd Mobile Fetures Revision: IMP-MAT-ENG-2017R2-2.0 Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned

More information

the machine and check the components USB Interface Cable Drum Unit Assembly (including Standard Toner Cartridge)

the machine and check the components USB Interface Cable Drum Unit Assembly (including Standard Toner Cartridge) Quick Setup Guide Strt Here DCP-8085DN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit http://solutions.rother.com/.

More information

E201 USB Encoder Interface

E201 USB Encoder Interface Dt sheet Issue 3, 14 th July 2014 E201 USB Encoder Interfce E201-9Q - incrementl E201-9S - bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce

More information

Sage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017

Sage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017 Sge CRM 2017 R3 Softwre Requirements nd Mobile Fetures Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The

More information

Lab 1 - Counter. Create a project. Add files to the project. Compile design files. Run simulation. Debug results

Lab 1 - Counter. Create a project. Add files to the project. Compile design files. Run simulation. Debug results 1 L 1 - Counter A project is collection mechnism for n HDL design under specifiction or test. Projects in ModelSim ese interction nd re useful for orgnizing files nd specifying simultion settings. The

More information

Registering as an HPE Reseller

Registering as an HPE Reseller Registering s n HPE Reseller Quick Reference Guide for new Prtners Mrch 2019 Registering s new Reseller prtner There re four min steps to register on the Prtner Redy Portl s new Reseller prtner: Appliction

More information

Agilent Mass Hunter Software

Agilent Mass Hunter Software Agilent Mss Hunter Softwre Quick Strt Guide Use this guide to get strted with the Mss Hunter softwre. Wht is Mss Hunter Softwre? Mss Hunter is n integrl prt of Agilent TOF softwre (version A.02.00). Mss

More information

Midterm 2 Sample solution

Midterm 2 Sample solution Nme: Instructions Midterm 2 Smple solution CMSC 430 Introduction to Compilers Fll 2012 November 28, 2012 This exm contins 9 pges, including this one. Mke sure you hve ll the pges. Write your nme on the

More information

Software Release Note

Software Release Note Softwre Relese Note Softwre Nme: DSU Version No. Build Code Supported OS Apply to (full model nme) New Feture(s) Chnge(s) Enhncement(s) Bug(s) Fixed Additionl Note(s) 2.2 Build 17051810 2003 NPort M12

More information

the machine and check the components AC Power Cord Quick Setup Guide User s Guide Accessory Order Form

the machine and check the components AC Power Cord Quick Setup Guide User s Guide Accessory Order Form Quick Setup Guide Strt Here DCP-8080DN DCP-8085DN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit

More information

Zenoss Core Installation Guide

Zenoss Core Installation Guide Zenoss Core Instlltion Guide Relese 5.2.1 Zenoss, Inc. www.zenoss.com Zenoss Core Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss nd the Zenoss logo re trdemrks or registered trdemrks

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 6.1.1 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2018 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

vcloud Director Service Provider Admin Portal Guide 04 OCT 2018 vcloud Director 9.5

vcloud Director Service Provider Admin Portal Guide 04 OCT 2018 vcloud Director 9.5 vcloud Director Service Provider Admin Portl Guide 04 OCT 208 vcloud Director 9.5 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments

More information

Polycom RealPresence Media Editor Quick Start

Polycom RealPresence Media Editor Quick Start Polycom RelPresence Medi Editor Quick Strt Version 5.5 Novemer 2011 3725-75201-001/A Trdemrk Informtion Polycom, the Polycom Tringles logo, nd the nmes nd mrks ssocited with Polycom s products re trdemrks

More information

MIPS I/O and Interrupt

MIPS I/O and Interrupt MIPS I/O nd Interrupt Review Floting point instructions re crried out on seprte chip clled coprocessor 1 You hve to move dt to/from coprocessor 1 to do most common opertions such s printing, clling functions,

More information

Engineer-to-Engineer Note

Engineer-to-Engineer Note Engineer-to-Engineer Note EE-232 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our

More information

Zenoss Core Installation Guide

Zenoss Core Installation Guide Zenoss Core Instlltion Guide Relese 6.1.0 Zenoss, Inc. www.zenoss.com Zenoss Core Instlltion Guide Copyright 2018 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo re trdemrks or registered

More information

Introductory Information. Setup Guide. Introduction. Space Required for Installation. Overview of Setup. Preparations. Install the Printheads

Introductory Information. Setup Guide. Introduction. Space Required for Installation. Overview of Setup. Preparations. Install the Printheads Introduction Setup Guide Introductory Informtion ENG Red this mnul efore ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Overview of Setup These re the steps in printer

More information

Beginner s Guide to the Environment

Beginner s Guide to the Environment Beginner s Guide to the Environment by Len Ssso for Version 3.0 e October 1997 E Soft- und Hrdwre GmbH Tble of Contents Chpter 1 Overview of the Environment Chpter 2 Some Things Chnge Some Things Sty The

More information

Load the ribbon on the ribbon cartridge. Load the ribbon cartridge in the printer. Fan the cards, and then load them in the input hopper.

Load the ribbon on the ribbon cartridge. Load the ribbon cartridge in the printer. Fan the cards, and then load them in the input hopper. Open the printer cover. Slide the clening roller onto the clening sleeve (). Remove the protective wrp from the clening roller () nd instll the clening roller in the printer (c). Lod the rion on the rion

More information

QEL 33A/35A, 98/99 Series

QEL 33A/35A, 98/99 Series *24908394* 24908394 Bseplte Conversion Kit QEL 33A/35A, 98/99 Series Instlltion Instructions 1. This kit converts ll 33/35A nd 98/99 series EL devices nd fire devices uilt prior to Oct. 2014 to quiet electric

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.3.0 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

HFX 100 Tx and HFX 100 Rx User Guide

HFX 100 Tx and HFX 100 Rx User Guide This guide describes the function, instlltion nd opertion of the trnsmitter nd receiver. Unless otherwise stted, the terms HFX 100, HDMI extender, nd extender refer to both units. The term trnsmitter refers

More information

Using Ontrol MpBus Driver for Sedona on R-ION

Using Ontrol MpBus Driver for Sedona on R-ION Belimo MpBus Driver for R-ION Using Ontrol MpBus Driver for Sedon on R-ION 24 Vdc Supply Devices RS485 supervory system 1/7 Ontrol Belimo MpBus Driver for R-ION R-ION MPBus Connection 2/7 Ontrol Belimo

More information

Engineer-to-Engineer Note

Engineer-to-Engineer Note Engineer-to-Engineer Note EE-245 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our

More information

Upgrading from vrealize Automation 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to March 2018 vrealize Automation 7.3

Upgrading from vrealize Automation 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to March 2018 vrealize Automation 7.3 Upgrding from vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to 7.3.1 15 Mrch 2018 vrelize Automtion 7.3 You cn find the most up-to-dte technicl documenttion on the VMwre wesite t: https://docs.vmwre.com/

More information

McAfee Network Security Platform

McAfee Network Security Platform NS7x00 Quick Strt Guide Revision D McAfee Network Security Pltform This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS7100, NS7200, nd NS7300 Sensors in

More information

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Quick Setup Guide Strt Here DCP-J40DW Plese red the Product Sfety Guide first efore you set up your mchine. Then, plese red this Quick Setup Guide for the correct setup nd instlltion. WARNING CAUTION IMPORTANT

More information

Start Here. Remove all tape and lift display. Locate components

Start Here. Remove all tape and lift display. Locate components HP Photosmrt 2600/2700 series ll-in-one User Guide Strt Here 1 USB cle users: Do not connect the USB cle until this guide instructs you to or the softwre my not instll properly. Use this guide to set up

More information

Upgrading from vrealize Automation 7.1 or Later to June 2018 vrealize Automation 7.4

Upgrading from vrealize Automation 7.1 or Later to June 2018 vrealize Automation 7.4 Upgrding from vrelize Automtion 7.1 or Lter to 7.4 15 June 2018 vrelize Automtion 7.4 You cn find the most up-to-dte technicl documenttion on the VMwre wesite t: https://docs.vmwre.com/ If you hve comments

More information

Registering as a HPE Reseller. Quick Reference Guide for new Partners in Asia Pacific

Registering as a HPE Reseller. Quick Reference Guide for new Partners in Asia Pacific Registering s HPE Reseller Quick Reference Guide for new Prtners in Asi Pcific Registering s new Reseller prtner There re five min steps to e new Reseller prtner. Crete your Appliction Copyright 2017 Hewlett

More information

Chapter 7. Routing with Frame Relay, X.25, and SNA. 7.1 Routing. This chapter discusses Frame Relay, X.25, and SNA Routing. Also see the following:

Chapter 7. Routing with Frame Relay, X.25, and SNA. 7.1 Routing. This chapter discusses Frame Relay, X.25, and SNA Routing. Also see the following: Chpter 7 Routing with Frme Rely, X.25, nd SNA This chpter discusses Frme Rely, X.25, nd SNA Routing. Also see the following: Section 4.2, Identifying the BANDIT in the Network Section 4.3, Defining Globl

More information

Unit #9 : Definite Integral Properties, Fundamental Theorem of Calculus

Unit #9 : Definite Integral Properties, Fundamental Theorem of Calculus Unit #9 : Definite Integrl Properties, Fundmentl Theorem of Clculus Gols: Identify properties of definite integrls Define odd nd even functions, nd reltionship to integrl vlues Introduce the Fundmentl

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.3.2 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

POWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62

POWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62 spring-cge connector SPC 5/...-ST(F)- Especilly in the high current rnge, the following is true for conductor connection: Time is money. The new spring-cge plug SPC 5 sves both, s due to the quick spring-cge

More information

McAfee Network Security Platform

McAfee Network Security Platform NS7x50 Quick Strt Guide Revision B McAfee Network Security Pltform This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS7150, NS7250, nd NS7350 Sensors in

More information

Enginner To Engineer Note

Enginner To Engineer Note Technicl Notes on using Anlog Devices DSP components nd development tools from the DSP Division Phone: (800) ANALOG-D, FAX: (781) 461-3010, EMAIL: dsp_pplictions@nlog.com, FTP: ftp.nlog.com Using n ADSP-2181

More information

Installation and Upgrade on Windows Server 2008 When the Secondary Server is Virtual VMware vcenter Server Heartbeat 6.5 Update 1

Installation and Upgrade on Windows Server 2008 When the Secondary Server is Virtual VMware vcenter Server Heartbeat 6.5 Update 1 Instlltion nd Upgrde on Windows Server 2008 When the Secondry Server is Virtul VMwre vcenter Server Hertet 6.5 Updte 1 This document supports the version of ech product listed nd supports ll susequent

More information