Installation 2 Front Panel 3 Access Control 4 Wi-Fi Setup 6 Bridge Mode 9 PPPoE Mode 16 Port Forwarding 26 Static IP Reservation 31 Troubleshooting
|
|
- Fay Chase
- 6 years ago
- Views:
Transcription
1 Installation 2 Front Panel 3 Access Control 4 Wi-Fi Setup 6 Bridge Mode 9 PPPoE Mode 16 Port Forwarding 26 Static IP Reservation 31 Troubleshooting 35 Support 37
2 1. Turn the power off for any devices that will be attached to the Yak modem. 2. Connect the DSL line to the DSL jack using the provided grey RJ11 (telephone) cable. The DSL WAN line connection is configured for connection by default. 3. Connect the PC, hub, or switch to the LAN ports. (A straight-through yellow Ethernet cable (provided), or a crossover cable can be used.) The modem automatically determines the type of signal required. Switch 4. Attach the power adapter. (The supplied power adapter may look different than the one illustrated here.) 5. Turn on the modem and any devices attached to it. 6. If one desires to use Yak High Speed Internet on wireless devices, such as smartphones, or tablets, please see the Wi-Fi Setup section in this guide for instructions. The modem is configured by default to communicate with devices on the LAN ports. 7. Wait five to ten minutes for these three LED lights to turn on: Power, DSL and Internet. Once lit, the Yak High Speed Internet service is available for use. NOTE: Slots and openings in the unit are provided for ventilation. To ensure reliable operation of the product, and to protect it from overheating, these slots and openings must not be blocked, or covered. This unit is also certified to operate effectively under the following conditions: 0 to 40 degrees C (Operating Temperature) DSL Line LAN Power Safety instructions and more information can be found on: (Service & Support > Documentation > DSL Bridges and Routers) 2
3 Power LAN1 to LAN4 WLAN DSL Internet SOLID GRE E N: Boot up successful SOLID RE D: Router is booting up OFF: Power is off ON: LAN link is active OFF: No LAN link BLINKING: Data transfer on LAN port ON: Wireless LAN enabled OFF: Wireless LAN disabled BLINKING: Data transfer over Wi-Fi interface ON: DSL link established and active OFF: No link BLINKING: Training mode (establishing link) ON: Internet link established and active OFF: No Internet connection BLINKING: Router is connected to the LAN 3
4 Access Control allows one to change the password to restrict access to the modem s user interface. When the modem is first received from Yak, it will already have a password set. The default user name is admin, and the default password is admin, plus the last three digits of the modem s serial number. (Example: admin123.) 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Management, then Access Control, and finally, Passwords. 4
5 3. The screen will change to the Access Control - Passwords page. Enter the required information: Username: The default is admin. Old Password: Current password. (The default is admin, plus the last three digits of the modem s serial number. (Example: admin123.)) New Password: Desired password. Confirm Password: Desired password, again. 4. Save changes by clicking Apply/Save. This concludes the Access Control setup. 5
6 Wi-Fi Setup allows one to specify wireless connection protocols for the modem. 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Wireless, then Basic. 6
7 3. The screen will change to the Wireless Basic page. Make sure the Enable Wireless box is checked. (Unchecking the box will disable wireless.) 4. Enter the SSID, an alphanumeric of one s choosing. This is the name wireless devices will use to connect to the modem. (The default is YAK-, plus the last three digits of the modem s serial number. (Example: YAK- 465.)) 5. Saves changes by clicking Apply/Save. Continued on the next page. Note: Hide Access Point Checking this box will prevent the SSID name from displaying in a local Wi-Fi search. 7
8 6. In the menu under Wireless, click on Security. The screen will change to the Wireless Security page. 7. The SSID should already be selected. If this is not the case, choose it in the drop down menu beside Select SSID. 8. Set the Network Authentication to Mixed WPA2/WPA-PSK. 9. Beside WPA/WAPI passphrase, enter a password for wireless devices to use. It is suggested to use the default password that shipped with the modem. (The default is $yak, plus the last six digits of the MAC address, plus an asterisk. (Example: $yak5b6cd4*)) 10. Save changes by clicking Apply/Save. This concludes the Wi-Fi setup. 8
9 Bridge Mode is only required if one chooses to use their own router instead of the one built into the modem. 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Advanced Setup, then WAN Service. 9
10 3. The screen will change to the Wide Area Network (WAN) Service Setup page. The modem cannot be set to Bridge Mode until the current WAN service is removed. Check the box in the Remove column, then click the Remove button. 10
11 4. The list will now be empty. Setting up Bridge Mode can begin by clicking the Add button. 11
12 5. The screen will change to the WAN Service Interface Configuration page. There will be only one menu choice: atm0/(0_0_35). Select it and click Next. 12
13 6. The screen will change to the WAN Service Configuration page. Under Select WAN service type, click on the Bridging button. 7. The field beside Enter Service Description will populate with br_0_0_35. This can be left alone. 8. Click the Next button to continue. 13
14 9. The screen will change to the WAN Setup Summary page. 10. Save changes by clicking Apply/Save. Continued on the next page. 14
15 11. The screen will return to the Wide Area Network (WAN) Service Setup page. 12. Confirm that Bridge Mode is now set by what appears in the Type column. This concludes the Bridge Mode setup. 15
16 PPPoE Mode is only required if one has set their modem to Bridge Mode, but wishes to return it to a regular modem setup. When the modem is first received from Yak, it will already have been set to PPPoE Mode. 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Advanced Setup, then WAN Service. 16
17 3. The screen will change to the Wide Area Network (WAN) Service Setup page. The modem cannot be set to PPPoE Mode until the current WAN service is removed. Check the box in the Remove column, then click the Remove button. 17
18 4. The list will now be empty. Setting up Bridge Mode can begin by clicking the Add button. 18
19 5. The screen will change to the WAN Service Interface Configuration page. There will be only one menu choice: atm0/(0_0_35). Select it and click Next. 19
20 6. The screen will change to the WAN Service Configuration page. Under Select WAN service type, click on the PPP over Ethernet (PPPoE) button. 7. The field beside Enter Service Description will populate with pppoe_0_0_35. This can be left alone. 8. Click the Next button to continue. 20
21 9. The screen will change to the PPP Username and Password page. Enter the required information: PPP Username: Enter account user name. (Example: PPP Password: Enter account password. (Example: ) 10. Leave the other fields at their default values, then click the Next button to continue. 21
22 11. The screen will change to the Routing Default Gateway page. Leave the fields at their default values, then click the Next button to continue. 22
23 12. The screen will change to the DNS Server Configuration page. Leave the fields at their default values, then click the Next button to continue. 23
24 13. The screen will change to the WAN Setup Summary page. 14. Save changes by clicking Apply/Save. Continued on the next page. 24
25 15. The screen will return to the Wide Area Network (WAN) Service Setup page. 16. Confirm that PPPoE Mode is now set by what appears in the Type column. This concludes the PPPoE Mode setup. 25
26 Port Forwarding is used to enable openings in the firewall to allow programs to communicate through a network. 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Advanced Setup, then NAT, and finally, Virtual Servers. 26
27 3. The screen will change to the NAT Virtual Servers Setup page. Click the Add button to begin setup. 27
28 4. The screen will change to the NAT Virtual Servers page. There are many pre-built specifications for the more common services that will fill in details automatically. If the one being used is not listed, it will have to be created manually. 5. If the service is listed, select it and click Apply/Save. Continue on page
29 Custom Service Setup 6. If the service is not listed, type a name for the service beside Custom Service. In the example on the right is Yak Digital Home Phone. 7. Enter the Server IP Address, the address to forward the ports to. (In the Yak Digital Home Phone example, it is the IP address given to the ATA by the modem.) 8. Enter the port ranges required into the External and Internal Port Start and Port End fields. In the example for Yak Digital Home Phone, it requires port ranges and to be opened, entered as: External/Internal Port Start: 5060 External/Internal Port End: 5061 External/Internal Port Start: External/Internal Port End: Set the Protocol to TCP, UDP, or TCP/UDP. (Yak Digital Home Phone uses TCP/UDP). 10. Save changes by clicking Apply/Save. 29
30 11. The screen will return to the NAT Virtual Servers Setup page, where the new service will be listed. This concludes the Port Forwarding setup. 30
31 Static IP Reservation is used to establish a permanent IP address for a device on a network. If Port Forwarding was setup, the IP address used for the service will need to be designated here. 1. Access the modem at the gateway address: 2. When prompted, enter one s username and current password. The screen will change to the main page, Device Info. In the menu on the left, click on Advanced Setup, then LAN. 31
32 3. The screen will change to the Local Area Network (LAN) Setup page. Leave the default settings and click on the Add Entries button. 32
33 4. The screen will change to the DHCP Static IP Lease page. Enter the required details: MAC Address: Example: AB:CD:EF:12:34:56 IP Address: Example: Save changes by clicking Apply/Save. 33
34 6. The screen will return to the Local Area Network (LAN) Setup page. Listed underneath Static IP Lease List will be the details of the device that was added. If more devices need to be added, another entry will be required for each. This concludes the Static IP Reservation setup. 34
35 Modem Not Connecting To Internet The modem s Power, DSL and Internet lights should be solid. If the DSL light is flashing, the modem is trying to connect to the DSLAM for Internet Access, but this should take less than thirty seconds. If the modem DSL light continues to flash for several minutes, try these steps: 1. Confirm that the DSL telephone cable is directly connected to the phone jack. (No splitters, or filters.) The DSL telephone cable should also not be longer than six feet (nine meters). 2. The Yak Modem has a built in router, but if there is a separate router being used, try connecting the computer directly to the modem. If this works, the issue may lie with the separate router. 3. If the DSL line runs over the same line as voice service, test to see if it is a faulty DSL filter. Unplug any filters and test the modem again. If it works, a filter may need to be replaced. If it does not, test the line for noise, or static, while the modem is OFF. If there is, it may be necessary to contact one s local service provider for repair. 35
36 4. Power cycle the modem by turning it off for a couple of minutes. Turn the modem back on and observe the boot process should take no more than thirty seconds with all three lights in a steady state: Power, DSL and Internet. 5. There may be an issue with the account ID and password setup when the modem boots up. Go to the Access Control section and verify the correct ID and password is set for the modem. 6. Try installing the DSL telephone cable into a different phone jack. 7. Contact Yak Internet Support if none of the above resolves the issue. 36
37 Contact Toll-Free: YAK.4YAK ( ) Fax: Hours of Operation Monday to Friday Saturday and Sunday 8AM to 10PM EST 10AM to 6PM EST 37
Billion BiPAC 7700NR2. Setup Guide
Billion BiPAC 7700NR2 Setup Guide Modem reference & light status sheet On the front of your modem you will notice a number of lights. The below table explains what each of these lights mean: LABEL ACTION
More informationBillion BiPAC 7800VDOX. Setup Guide
Billion BiPAC 7800VDOX Setup Guide MODEM REFERENCE & LIGHT STATUS SHEET On the front of your modem you will notice a number of lights. The below table explains what each of these lights mean: LABEL ACTION
More informationNF10W - QUICK START GUIDE. VDSL / ADSL WiFi Modem Router
NF10W - QUICK START GUIDE VDSL / ADSL WiFi Modem Router WELCOME This quick start guide is designed to get you up and running quickly with your new router. More advanced set up instructions can be found
More informationNF17ACV - QUICK START GUIDE. VDSL / ADSL Dual Band AC1600 WiFi Gigabit Modem Router with VoIP
NF17ACV - QUICK START GUIDE VDSL / ADSL Dual Band AC1600 WiFi Gigabit Modem Router with VoIP WELCOME This quick start guide is designed to get you up and running quickly with your new router. More advanced
More informationPart # Quick-Start Guide. SpeedStream 6500 Residential Gateway
Part # 007-6510-001 Quick-Start Guide SpeedStream 6500 Residential Gateway Before you begin, Verify that the following items came with your DSL kit: Step 1 > Install Line Filters 1 2 4 5 6 1 SpeedStream
More informationEnhanced Hybrid 4G LTE Gateway NL1901ACV - QUICK START GUIDE
Enhanced Hybrid 4G LTE Gateway NL1901ACV - QUICK START GUIDE WELCOME Thank you for choosing a NetComm NL1901ACV Enhanced Hybrid 4G LTE Gateway. This guide will help you set up, connect and configure your
More informationXBox Setup.
XBox Setup (NB604) XBox Setup There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable
More informationFEATURES HARDWARE CONNECTION
1 FEATURES 1. Support ANSI T1.413 ISSUE 2, ITU G.992.1 (G.DMT), ITU G.992.2 (G.LITE), ITU G992.3, ITU G992.5 2. Web-based configuration and monitoring. 3. Support multiple PVCs. 4. Routing function. 5.
More informationPlease use only wired network connections to configure the Router.
Please use only wired network connections to configure the Router. Turn off all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now.
More informationPlease note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system.
Please note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system. Please follow these steps to ensure that any changes made by your previous
More informationDI GHz Wireless Router
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DI-514 2.4GHz Wireless Router Before You Begin 1. If you purchased this router to share
More informationPort Forwarding Setup (RTA1025W Rev2)
Port Forwarding Setup (RTA1025W Rev2) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly
More informationSteady green On hook. Slow flashing green Off hook. Off Port not ready. Off No link. Fast flashing green Upgrading firmware.
Product Features Product Features Top Panel Feature Description Steady green On hook. Phone Phone 2 Slow flashing green Off hook. Off Port not ready. Flashing green Transmitting or receiving data through
More informationBiPAC 8501 R3/ 8521 R3
BiPAC 8501 R3/ 851 R3 SHDSL.bis Firewall Bridge/ Router Quick Start Guide Quick Start Guide Billion BiPAC 8501 R3/ 851 R3 SHDSL.bis Firewall Bridge/Router For more detailed instructions on configuring
More informationStep 5: Plug the power adaptor into the PWR socket on the back of the modem. Plug the other end of the power adaptor into the wall socket.
Before you start You will need your username and password from ISP. All devices on your phone line will need to have an ADSL line filter attached to them. This includes Telephones, Fax Machines, and Dial-up
More informationLEGUANG N900 Wireless Router Configuration Guide
LEGUANG N900 Wireless Router Configuration Guide ActForNet Technologies Inc. February 2014 Contents 1. What is included... 3 2. Installation Guide... 3 2.1 How to connect... 3 2.2 How to reset... 4 2.3
More informationCHAPTER 7 ADVANCED ADMINISTRATION PC
ii Table of Contents CHAPTER 1 INTRODUCTION... 1 Broadband ADSL Router Features... 1 Package Contents... 3 Physical Details... 4 CHAPTER 2 INSTALLATION... 6 Requirements... 6 Procedure... 6 CHAPTER 3 SETUP...
More informationInstallation with a DSL Connection.
www.voicelift.com Support@VoiceLift.com Office: 1.866.237.3001 Fax: 321.632.7632 Installation with a DSL Connection. DSL connections can be more challenging since most DSL modems are also routers and supply
More informationBEC 8920AC Ultimum The Ultimate Residential Gateway with ac VDSL2/ADSL2+/Bonded/FTTH Quick Start Guide
BEC 8920AC Ultimum The Ultimate Residential Gateway with 802.11ac VDSL2/ADSL2+/Bonded/FTTH Quick Start Guide BEC 8920AC The Ultimate Residential Gateway w/ 802.11ac PLEASE READ THE QUICK START GUIDE AND
More informationWI-FI HUB+ TROUBLESHOOTING GUIDE
WI-FI HUB+ TROUBLESHOOTING GUIDE Overview This guide is here to provide some answers to some commonly asked questions about your Wi-Fi Hub+. Tip: you can connect to your Wi-Fi Hub+ using an Ethernet cable
More informationContent 1 OVERVIEW HARDWARE DESCRIPTION HARDWARE INSTALLATION PC CONFIGURATION GUIDE... 5 WEB-BASED MANAGEMENT GUIDE...
Content 1 OVERVIEW...1 1.1FEATURES...1 1.2 PACKETCONTENTS...3 1.3 SYSTEM REQUIREMENTS... 1.4 FACTORY DEFAULTS...4 1.5 WARNINGS AND CAUTIONS...4 2 HARDWARE DESCRIPTION... 6 3 HARDWARE INSTALLATION...8 4
More informationXBox Setup There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable specified ports
More informationAtrie DB120-WL Wireless 4-port Ethernet DSL Gateway/Router. User Manual
Atrie DB120-WL Wireless 4-port Ethernet DSL Gateway/Router User Manual ( V 1.0 ) CONTENTS 1 OVERVIEW...4 1.1 ABOUT WIRELESS ADSL...4 1.2 ABOUT ADSL2/2+...4 1.3 FEATURES...4 2 INTRODUCTION...5 2.1 INTERFACE
More informationBIPAC Broadband Firewall Router. Quick Start Guide
BIPAC 6600 Broadband Firewall Router Quick Start Guide Billion BIPAC 6600 Broadband Firewall Router For more detailed instructions on configuring and using the Broadband Firewall Router, please refer
More informationBIPAC-5100 / 5100W (Wireless) ADSL Router
BIPAC-5100 / 5100W (Wireless) ADSL Router Quick Start Guide Billion BIPAC-5100 / 5100W ADSL Router For more detailed instructions on configuring and using the (Wireless) ADSL Firewall Router, please refer
More informationBiPAC 7800VDP(O)X. Dual-band Wireless-N VoIP ADSL2+ (VPN) Router. Quick Start Guide
BiPAC 7800VDP(O)X Dual-band Wireless-N VoIP ADSL2+ (VPN) Router Quick Start Guide Billion BiPAC 7800VDP(O)X Dual-band Wireless-N VoIP ADSL2+ (VPN) Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE
More informationPart # Quick-Start Guide. SpeedStream 4200 Modem PPPoE Modem Router
Part # 007-0-00 Quick-Start Guide SpeedStream 00 Modem PPPoE Modem Router Before you begin, Verify that the following items came with your DSL kit: Step > Install Line Filters 7 SpeedStream Device Documentation
More informationHomepage. My Internet Connection No internet access, unstable or slow connection or unable to browse.
Homepage Help me resolve a problem with My Internet Connection No internet access, unstable or slow connection or unable to browse. My Wi-Fi Setup my Wi-Fi or unable to connect. Change Wi-Fi Name/Password
More informationEthernet (CAT5 UTP/Straight-Through) Cable. 5V DC Power Adapter
1 This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. Before You Begin Check Your Package Contents DI-824VUP+ 2.4GHz Wireless VPN Router and
More informationBiPAC 6404VP/VGP. VoIP/(802.11g) Broadband Firewall Router. Quick Start Guide
BiPAC 6404VP/VGP VoIP/(802.11g) Broadband Firewall Router Quick Start Guide VoIP/(802.11g) Broadband Firewall Router For more detailed instructions on configuring and using the VoIP/(802.11g) Broadband
More information4 PORTS + WIRELESS ADSL2+ Router DB120-WL. User Manual V 1.1
4 PORTS + WIRELESS ADSL2+ Router DB120-WL User Manual V 1.1 CONTENTS 1.OVERVIEW...3 1.1 ABOUT ADSL...3 1.2 ABOUT ADSL2/2+...3 1.3 FEATURES...3 2 SPECIFICATION...4 2.1 INTERFACE INTRODUCTION...4 2.1.1 INDICATOR
More informationBiPAC 7800(N) (802.11n) Dual WAN ADSL2+ Firewall Router. Quick Start Guide
BiPAC 7800(N) (802.11n) Dual WAN ADSL2+ Firewall Router Quick Start Guide Billion BiPAC 7800(N) (802.11n) Dual WAN ADSL2+ Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY.
More informationWIRELESS ROUTER N150. User Manual. F9K1009v1 8820zb01125 Rev.B00
WIRELESS ROUTER N150 User Manual F9K1009v1 8820zb01125 Rev.B00 TABLE OF CONTENTS Getting Started... 1 What s in the Box...1 Initial Setup...1 How to Set It UP...2 Adding Computers to Your Network...3 Manually
More informationBiPAC 6404VGP R3. VoIP/ g Broadband Firewall Router. Quick Start Guide
BiPAC 6404VGP R3 VoIP/ 802.11g Broadband Firewall Router Quick Start Guide Quick Start Guide Billion BiPAC 6404VGP R3 VoIP/ 802.11g Broadband Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW
More informationBiPAC 8200M. BiPAC 8200N
BiPAC 8200M VDSL2 Modem BiPAC 8200N Wireless-N VDSL2 Firewall Router Quick Start Guide Billion BiPAC 8200M VDSL2 Modem/ BiPAC 8200N Wireless-N VDSL2 Firewall Router PLEASE READ THE QUICK START GUIDE
More informationBiPAC 5200 Series. (802.11g) ADSL2+ Modem/Router. Quick Start Guide
BiPAC 5200 Series (802.11g) ADSL2+ Modem/Router Quick Start Guide Billion BiPAC 5200 Series ADSL2+ Modem/Router For more detailed instructions on configuring and using the (802.11g) ADSL2+ Modem/Router,
More information3G/4G Wireless N150 Router m2
NETCOMM LIBERTY SERIES 3G/4G Wireless N150 Router m2 3GM2WN Quick Start Guide The router has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The LED
More informationMF10 3G Wireless Router
MF10 3G Wireless Router Fixed Wireless Adapter Quick Setup Guide Contents Contents... 2 Description:... 3 Features:... 3 LED Indicator... 3 Interface Description... 4 Installation... 5 Inserting the (U)SIM
More informationPart # Quick-Start Guide. SpeedStream Residential Gateway 5450 Four-Port Router
Part # 007-6560-001 Quick-Start Guide SpeedStream Residential Gateway 5450 Four-Port Router Before you begin, Verify that the following items came with your DSL kit: 1 SpeedStream Device 2 Documentation
More informationUIP1869V User Interface Guide
UIP1869V User Interface Guide (Firmware version 0.1.8 and later) Table of Contents Opening the UIP1869V's Configuration Utility... 3 Connecting to Your Broadband Modem... 5 Setting up with DHCP... 5 Updating
More informationQuick Installation Guide of Acer WLAN 11b Broadband Router
Preparation 1 At lease one PC with IEEE802.11b WLAN client installed. 2 One straight-through Category 5 Ethernet cable, used to link WAN interface to xdsl or CM for Internet connection. 3 Acer WLAN 11b
More informationHigh Speed Internet set up guide. Read me first
High Speed Internet set up guide Read me first Welcome Thank you for choosing TELUS. The 10 simple steps in this guide will help you set up your modem and quickly connect to the Internet. If you have questions
More informationNetwork your computers and share your ADSL Internet access
ADSL Modem with wireless Pre-N Router Network your computers and share your ADSL Internet access User Manual F5D8630-4A Table of Contents 1 Introduction........................................1 Benefits
More informationUser Manual DIR-850L. Wireless AC1200 Dual Band Gigabit Router.
User Manual DIR-850L Wireless AC1200 Dual Band Gigabit Router USER MANUAL: DIR-850L Wireless AC1200 Dual Band Gigabit Router SYSTEM REQUIREMENTS Network Requirements Web-based Configuration Utility Requirements
More informationAbout your new TP-Link TD-W9970 Modem
About your new TP-Link TD-W9970 Modem SUPPORT We provide support for the service we offer: connecting to NCF DSL, email and getting your modem operational. Contact NCF support at 613-721-1773, press '0'
More informationParadyne Windows XP Setup Instructions. Welcome to Hay Communications High Speed Internet Service
Paradyne Windows XP Setup Instructions Welcome to Hay Communications High Speed Internet Service The next few pages will guide you through the installation of the modem and software requirements of your
More informationBiPAC 7800DX(L) Dual-Band Wireless-N 3G/4G LTE (VPN) ADSL2+ Router. Quick Start Guide
BiPAC 7800DX(L) Dual-Band Wireless-N 3G/4G LTE (VPN) ADSL2+ Router Quick Start Guide Quick Start Guide Billion BiPAC 7800DX(L) Dual-Band Wireless-N 3G/4G LTE (VPN) ADSL2+ Router PLEASE READ THE QUICK START
More informationBroadband Setup Netcomm NB14
Broadband Setup Netcomm NB14 Index Modem Reference Guide 1. Getting Started - Requirements - Connecting the NB14 to your computer - Connecting filters 2. Configuring Your Modem - Logging into your modem
More informationADSL User Manual. Wireless-N BROADBAND ROUTER : Introduction
ADSL User Manual 1 : Introduction The ADSL is a communication terminal, which integrates ADSL access, broadband SOHO router, WLAN and VoIP service. This device can provide high data transmission, downstream
More informationF.A.Q for TW100-S4W1CA
F.A.Q for TW100-S4W1CA Q: How do I configure the TW100-S4W1CA for a DSL, PPPoE connection? A: Step 1 Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP
More informationD-Link AirPlus G DI-524
D-Link AirPlus G DI-524 802.11g/ 2.4 GHz Wireless Router TM Manual Building Networks for People Contents Package Contents... 3 Introduction... 4 Wireless Basics... 8 Getting Started...11 Using the Configuration
More informationLevelOne WBR User s Manual. 11g Wireless ADSL VPN Router. Ver
LevelOne WBR-3407 11g Wireless ADSL VPN Router User s Manual Ver 1.00-0510 Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless ADSL Router Features... 1 Package Contents... 5 Physical Details... 6 CHAPTER
More informationDynalink RTA020 ADSL Router Quick Set Up Guide
Important Dynalink RTA020 ADSL Router Quick Set Up Guide This Guide is intended to get you started quickly. We have pre-configured the router for the Telecom ADSL network. All you need is to follow through
More informationAtrie DB108-E ADSL MODEM. User Manual V1.1
Atrie DB108-E ADSL MODEM User Manual V1.1 CONTENTS 1.OVERVIEW...4 1.1 ABOUT ADSL...4 1.2 ABOUT ADSL2/2+...4 1.3 FEATURES...4 2 SPECIFICATION...5 2.1 INTERFACE INTRODUCTION...5 2.1.1 Indicator and Interface...5
More informationGet Ready to Enjoy - The New Way to Phone!
User Manual Get Ready to Enjoy - The New Way to Phone! Welcome to Vonage! It s easy to get started with your Vonage VWR Device! For assistance with installation or troubleshooting common problems, please
More informationTable of Contents. D-Link DSL-2730U User Manual 1
Table of Contents D-Link DSL-2730U User Manual 1 Table of Contents PACKAGE CONTENTS... 4 SYSTEM REQUIREMENTS... 4 FEATURES... 5 HARDWARE OVERVIEW... 7 Connections... 7 LEDs... 8 INSTALLATION... 9 BEFORE
More informationVR1600v (NBN FTTN & NBN FTTB) Windows 10
(NBN FTTN & NBN FTTB) Windows 10 IMPORTANT MESSAGE Your modem has already been pre-configured, you do not need to follow each step of the set-up guide but should retain this document in case you need to
More informationQuick Installation Guide
Quick Installation Guide DL-200 Cellular Data logger V1.2_201610 TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 4 1.1 CONTENTS LIST... 5 1.2 HARDWARE INSTALLATION... 6 1.2.1 WARNING... 6 1.2.2 SYSTEM REQUIREMENTS...
More informationSAGEMCOM 5355 GATEWAY
SAGEMCOM F@ST 5355 GATEWAY Disclaimer This is not an official document. I am not employed by Telstra nor am I an IT person. I wrote this document because setting up my gateway was a hassle due to the lack
More informationQuick Installation Guide DVG-N5402SP
Quick Installation Guide DVG-N5402SP VoIP Router Check Your Package Contents DVG-N5402SP VoIP Router Ether (CAT5 UTP) Cable 12VDC, 2A Power Adapter Using a power adapter with a different voltage rating
More informationIP806GA/GB Wireless ADSL Router
IP806GA/GB Wireless ADSL Router 802.11g/802.11b Wireless Access Point ADSL Modem NAT Router 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless ADSL Router Features...
More informationDI-704P Ethernet Broadband Router. Ethernet (Straight Through) Cable. 5V DC Power Adapter
1 This product can be set up using any current Web browser, i.e., Internet Explorer or Netscape Navigator. DI-704P Ethernet Broadband Router and Print Server Before You Begin 1. If you purchased this router
More informationDI a/11g Dualband 108Mbps Wireless Router
1 This product can be set up using any curren ent t web browser owser,, i.e.,., Internet Explorer 6 or Netscape Navigator 6.2.3. Befor ore You Begin DI-784 11a/11g Dualband 108Mbps Wireless Router 1. If
More informationQuick Start Guide. Cisco SPA232D Mobility Enhanced ATA
Quick Start Guide Cisco SPA232D Mobility Enhanced ATA Package Contents Analog Telephone Adapter Ethernet Cable Phone Cable Power Adapter Quick Start Guide Product CD-ROM Welcome Thank you for choosing
More informationI-Fly Wireless Broadband Router
with 4 Fast Ethernet ports + 1 Wan port Quick Start Guide A02-WR-54G/G2 (November 2003)V1.00 For more detailed instructions on configuring and using the I- Storm Lan Router ADSL, please refer to the online
More information802.11N Wireless Broadband Router
802.11N Wireless Broadband Router Pre-N Wireless Access Point Broadband Internet Access WPS 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless Router Features... 1
More informationAirCruiser G Wireless Router GN-BR01G
AirCruiser G Wireless Router GN-BR01G User s Guide i Contents Chapter 1 Introduction... 1 Overview...1 Features...1 Package Contents...2 AirCruiser G Wireless Router Rear Panel...2 AirCruiser G Wireless
More informationADSL X6 U S E R G U I D E
ADSL X6 U S E R G U I D E NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. No
More informationSetting up the Linksys Smart Wi-Fi Router using the Smart Setup Wizard
Setting up the Linksys Smart Wi-Fi Router using the Smart Setup Wizard This article will guide you on how to set up your Linksys Smart Wi-Fi Router using the Smart Setup Wizard. QUICK TIP: The Smart Setup
More informationUser s Manual ADSL Router Modem DB Ethernet Ports
User s Manual ADSL Router Modem DB 120 4 Ethernet Ports 1. About ADSL ADSL (Asymmetric Digital Subscriber Line) is a technology that allows high-speed data to be transmitted over existing copper telephone
More informationDI-808HV 8-Port Broadband VPN Router
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DI-808HV 8-Port Broadband VPN Router 1. Thank you for purchasing this Router to share your
More informationBiPAC 7401V(G)PX. 3G/ VoIP/ (802.11g) ADSL2+ Firewall Router. Quick Start Guide
BiPAC 7401V(G)PX 3G/ VoIP/ (802.11g) ADSL2+ Firewall Router Quick Start Guide Quick Start Guide Billion BiPAC 7401V(G)PX 3G/ VoIP/ (802.11g) ADSL2+ Firewall Router PLEASE READ THE QUICK START GUIDE AND
More informationOn the left hand side of the screen, click on Setup Wizard and go through the Wizard.
Q: How do I configure the TEW-435/504BRM (b1) to a DSL, PPPoE connection? A: Step 1 Open your web browser and type the IP address of the TEW-435/504BRM in the address bar. The default IP address is 192.168.0.1.
More informationPreface. Manual Revisions. Trademarks
DIR-815 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual
More informationWelcome to your Cisco 867VAE-W Router
Welcome to your Cisco 867VAE-W Router Welcome to your new Cisco 867VAE-W Integrated Services Router. This little guy is a networking genius and will have you online in no time. Whether it be for home or
More informationDFL-700. Check Your Package Contents. Network Security Firewall
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6. DFL-700 Network Security Firewall Before You Begin If you purchased this Network Security Firewall
More informationYOUR NEW MODEM SUPPORTS:
YOUR NEW MODEM SUPPORTS: ADSL / ADSL2 / ADSL2+ 802.11 b/g/n/ac Wi-Fi VDSL2 UFB 3 x 10/100/1000 LAN ports 1 x 10/100/1000 WAN/LAN port Up to 300Mbps on 2.4 GHz + 1300Mbps on 5 GHz 2 x VOIP phone ports 1
More informationSEVIO User Guide. Document ID: sv_user_guide_en_v17_05
SEVIO User Guide https://sevio.it 2017 Sevio. All rights reserved. Trademarks Sevio is an Sevio S.r.l. trademark. Microsoft, Windows are a Microsoft Corporation registered brand. Other product names and
More informationVersion 1.00 May 02, User Manual. Wi-Fi AC600 Dual Band Mini Router DIR-516
Version 1.00 May 02, 2014 User Manual Wi-Fi AC600 Dual Band Mini Router DIR-516 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation
More information1. You have a Wireless router from Edimax. We used BR-6258n as example. Your screen may look somewhat different with BR-6258n.
EDIMAX COMPUTER INC. 2011 Edimax Computer 3350 Scott Blvd., Building #15 Santa Clara, California 95054, USA Phone 408-496-1105 Fax 408-980-1630 www.edimax.us 1 Congratulations on your purchase of the Edimax
More informationLevelOne FBR User s Manual. 1W, 4L 10/100 Mbps ADSL Router. Ver
LevelOne FBR-1416 1W, 4L 10/100 Mbps ADSL Router User s Manual Ver 1.00-0510 Table of Contents CHAPTER 1 INTRODUCTION... 1 FBR-1416 Features... 1 Package Contents... 3 Physical Details... 3 CHAPTER 2
More informationInstallation guide. A. No, I do not have a router. Choose this option if you have a standard DSL or cable modem and no router.
Installation guide This installation guide will show you how to get your voip phone service working. First, we need to know which set of instructions to give you. Please choose the option below that describes
More informationBIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router with 4-port 10/100M Switch Quick Start Guide
BIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router with 4-port 10/100M Switch Quick Start Guide Billion BIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router For more detailed instructions
More informationKW5590 Wireless Router User Manual
KW5590 Wireless Router NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. All
More informationPlease use only wired network connections to configure the Router.
Note Please use only wired network connections to configure the Router. Power down all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect
More informationWHR-300HP2 / WHR-600D User Manual
AirStation WHR-300HP2 / WHR-600D User Manual www.buffalotech.com 35020160-03 2015.04 Contents Chapter 1 - Product Overview...6 Package Contents...6 Diagrams and Layout...6 Front Panel...6 Back Panel...8
More informationQuick Setup Guide - AirStation Draft-N WZR-G300N Nfiniti Wireless Router & AP
Quick Setup Guide - AirStation Draft-N WZR-G300N Nfiniti Wireless Router & AP Package Contents WZR-G300N AirStation Base Stand AC Adapter and Power Cable CAT5 LAN cable Utility CD with Manual Quick Setup
More informationBiPAC 7300(G) (802.11g) ADSL2+ Router. Quick Start Guide
BiPAC 7300(G) (802.11g) ADSL2+ Router Quick Start Guide Billion BiPAC 7300(G) ADSL2+ Router For more detailed instructions on configuring and using the (802.11g) ADSL2+ Router, please refer to the on-line
More informationSetting up the Linksys WRT32X
Setting up the Linksys WRT32X Share the Article: The Linksys WRT32X AC3200 Dual-Band Wi-Fi Gaming Router with Killer Prioritization Engine uses the Killer Prioritization Engine to provide the best home
More informationBiPAC 7404VNOX BiPAC 7404VNPX
BiPAC 7404VNOX BiPAC 7404VNPX 3G/ VoIP/ 802.11n ADSL2+ (VPN) Firewall Router Quick Start Guide Billion BiPAC 7404VNOX/7404VNPX 3G/VoIP/802.11n ADSL2+ (VPN) Firewall Router PLEASE READ THE QUICK START
More informationWNAP 3G MOBILE ROUTER. Quick Installation Guide
WNAP 3G MOBILE ROUTER Quick Installation Guide To avoid users without access right through your WNAP 3G Mobile Router, it is suggested to change WLAN SSID and password and admin password for web configuration
More informationHG658 Home Gateway. User Guide HUAWEI TECHNOLOGIES CO., LTD.
HG658 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD. HG658 Home Gateway V100R001 User Guide Issue 01 Date 2012-06-07 Part Number 202500 Huawei Technologies Co., Ltd. provides customers with comprehensive
More informationAC1200 WiFi Router User Manual
AC1200 WiFi Router User Manual Model R6120 September 2017 202-11753-03 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support
More informationSmartphone Business Communication System
IG7600 Smartphone Business Communication System Copyright 2015, All Rights Reserved. Ver161091105 Installation Components M22-1 - System Installation Follow the flowchart to install IG7600 system. The
More informationBroadband High-Speed DSL Modem User Manual
Broadband High-Speed DSL Modem User Manual Model DM200 September 2017 202-11621-03 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support
More informationUSER GUIDE HOME WI-FI PERFECTED. AmpliFi Home Wi-Fi System
USER GUIDE HOME WI-FI PERFECTED AmpliFi Home Wi-Fi System AmpliFi User Guide Table of Contents Table of Contents Chapter 1: Getting Started.... 1 Introduction... 1 Installation.... 1 Touchscreen of the
More informationTechnical Support. Package Contents. N300 Wireless ADSL2+ Modem Router N300RM Installation Guide. On Networks. Installation Guide
Technical Support Thank you for selecting On Networks products. After installing your device, locate the serial number on the label of your product and use it to register your product at www.on-networks.com/register.
More informationALL500VDSL2. WLAN N VDSL Router. User s Manual
ALL500VDSL2 WLAN N VDSL Router User s Manual NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation
More informationNET INTEGRATION TECHNOLOGIES INC. NET INTEGRATOR MICRO. Quick Start Guide
NET INTEGRATOR MICRO Quick Start Guide 602-0002-02 Meet Your Net Integrator Micro Front View USB Port Ethernet LED Hard Drive LED Power LED Power button 2 Quick Start Guide Back View DC 12V input connector
More informationPort Forwarding Setup (NB7)
Port Forwarding Setup (NB7) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly used
More information