Megaplex-2100/2104. Modular Integrated Access Multiplexers

Size: px
Start display at page:

Download "Megaplex-2100/2104. Modular Integrated Access Multiplexers"

Transcription

1 Where to buy > See the product page > Data Sheet Megaplex-2100/2104 Sub-DS0 multiplexer providing voice, data, Ethernet, and other unique services (teleprotection, omnibus) Multiple n x 64 kbps, SHDSL, E1/T1 or fractional E1/T1 main links, with combined TDM capacity of up to 8 Mbps (124 timeslots) 10/100-Mbps IP access link for transparent circuit extension over IP, using RAD s TDMoIP technology Self-healing TDM E1/T1 rings and Resilient Fast Ethernet Ring (RFER) technology (under 50 msec switchover protection) Optional redundant configurations for critical applications Wide range of I/O modules supporting multiple channels: up to 120 high speed data channels up to 132 low speed data channels up to 55 full BRI (2B+D) channels up to 120 PCM voice channels The Access Company

2 Megaplex-2100/2104 MP-2100/2104 is a modular integrated access TDM multiplexer, which integrates multiple dedicated data, voice, ISDN and LAN channels over multiple main (network) links. MP-2100/2104 equipped with 8-port main link modules in conjunction with 12-port high-speed modules provides a traffic payload capacity of up to 248 DS0 timeslots. The modules of version 11 and lower support up to 124 DS0 timeslots (8 Mbps). The flexible, modular MP-2100/2104 with a wide choice of I/O (user interface) modules was designed for applications ranging from small campus networks to multi-site corporate networks or extensive carrier access solutions. Due to MP- 2100/2104 s standards adherence, central office based cross-connect units (DACS) can separate voice and data, sending each to the appropriate carrier or service. Megaplex enables carriers to successfully deploy bundled services, ISDN services and Internet access. The integration of a broad range of services makes Megaplex a cost-effective access device, with reduced deployment and maintenance costs. Megaplex with TDMoIP technology provides a cost-effective, versatile and modular solution for transmitting legacy TDM traffic over IP networks. This is especially suitable for large corporations, utilities or power companies that are seeking a gradual migration to IP networks. The equipment conforms to international standards, ensuring compatibility in multi-vendor environments worldwide. Figure 1. Megaplex-2100/2104 Multiple Services over Various Networks

3 Data Sheet DS0 CROSS-CONNECT The built-in, non-blocking, DS0 cross-connect matrix enables routing any channel s timeslots to any link. This allows Megaplex to maximize its efficiency by splitting voice and data channels and redirecting the traffic, via separate links, to the appropriate service. The cross-connect matrix also enables routing timeslots from any link to any other link. This facilitates drop-insert, bypass, or broadcast multi-link applications. A total of 124 timeslots can be allocated, either for transmission of I/O channels or for bypassing timeslots between links of different modules. TDMOIP Megaplex offers an optional IP main link module that transmits TDM traffic directly over IP networks. This TDMoIP access module converts user TDM traffic into IP packets transmitted on 10/100BaseT or 100BaseF Ethernet networks. CHASSIS There are two basic chassis: Megaplex-2100 (4U high) chassis accommodating up to 12 main link and I/O modules Megaplex-2104 (2U high) chassis accommodating up to 5 main link and I/O modules. TIMING Multiple system timing options are available: Internal crystal oscillator clock Clock received from any link (loopback) Clock from any high speed module channel External station (master) clock Adaptive timing received from any bundle (with ML-IP only). Any clock source can be set as fallback in the event of primary clock source failure. Figure 2. Point-to-Point Topology

4 Megaplex-2100/2104 SYSTEM REDUNDANCY Megaplex s modular, distributed architecture enables redundancy at different levels of the network and provides a system with no single point of failure. System hardware redundancy is attained by an optional redundant power supply and common logic module (MP-2100 chassis only). 1:1 protection switching on the main link modules protects against network or cable failure. Additional main link modules can be installed and interconnected via Y-cables to provide protection against main link hardware failures. Bundle redundancy provides backup for IP transmissions (functions similarly to E1/T1 link parallel TX redundancy). In case of link failure, Megaplex activates alternate routing. This is achieved by storing multiple configuration databases and flipping (switching) between them in case of any network event. The Megaplex system also supports two RAD proprietary types of ring redundancy, provided by its main link modules: E1/T1 Ring: Similar to SDH, the E1/T1 ring features ring redundancy in a closed dual-ring topology: one path propagates data clockwise and the other counterclockwise. Each Megaplex can receive data through two different paths, and selects only the signal received through one of the paths for processing. In case of failure, the failed segment is bypassed by using the second path, providing self-healing in less than five seconds. RFER: The TDMoIP link module employs RAD s Resilient Fast Ethernet Ring (RFER) technology for creating self-healing Ethernet ring networks. RFER reroutes traffic within 50 msec of a ring segment failure, providing fast redundancy performance similar to SDH networks. Survivability is further enhanced by RFER s scalable support for multiple rings. RFER can carry up to 40 E1 or 50 T1 links with no limit on the number of nodes. Figure 3. Resilient Fast Ethernet Ring (RFER) Provides 50-msec Self-Healing IP Networks Megaplex ML-IP with RAD s RFER technology, enables corporations, campuses, utilities, and transportation companies to create highly reliable IP networks with 50-msec link protection switching, using dark fiber or copper wire in a ring topology. Multiple fractional or full E1/T1 links provide load sharing between the links, as well as automatic backup, with prioritization of voice and data services. Link redundancy is supported, providing 1:1 protective switching between any two links (within 50 msec between dual links of same ML module).

5 Data Sheet R2 SIGNALING Main link modules support R2 signaling with transparent MFC/DECADIC, so that Megaplex can be placed between an older R2-PBX and a digital (E1-CAS) PBX. The MFC/DECADIC signaling is not terminated by Megaplex, but passed on to the PBX. In addition to the ITU-T standard R2 protocol, several predefined national PTT protocols, as well as user-defined variations, are also supported. Since the R2 signaling support is provided by the main link modules, all voice modules support R2. COMMON LOGIC MODULES The Common Logic (CL) module controls the Megaplex operation and is the interface for its configuration and management. It stores the application software and up to 10 configuration databases (depending on complexity) for multiple independent configurations. The CL also stores all system event information. Flash EPROM for software download is provided. Two dedicated ports are provided on the CL module for management purposes. One port has a 9-pin DCE interface for direct connection of a management terminal or PC. The other is ordered with one of the following interface options: Ethernet 10BaseT (UTP) Ethernet 10Base2 (BNC) V.24/RS-232 DTE. An input voltage detector, intended for sensing external events (coming from temperature alarm sensors etc), generates internal alarms, which are sent to the NMS station and reported to the user. Two outbound relays can be triggered by any user-selected major or minor alarm, for routing of Megaplex alarms to outside indicators, such as buzzers and bells. Figure 4. Megaplex-2100 in a Tetra Ring RAD s DXC (Digital Cross-connect) DACS complements Megaplex s own cross-connect capabilities, to provide a comprehensive network solution. DXC flexibly routes timeslots between different Megaplex and other E1/T1 sites. The equipment in all the sites is easily controlled and monitored by an integrated network management system.

6 Megaplex-2100/2104 MAIN LINK MODULES E1/T1 Main Links Megaplex TDM E1/T1 main link (ML) modules allow direct connection to a wide range of services, eliminating the need for external equipment. Multiple active links can operate in each chassis. Additional modules can also be installed for link redundancy. The various ML modules can be configured for a broad range of applications: from single link non-redundant operation, to multiple full or fractional E1/T1 link applications requiring drop & insert and broadcast. E1/T1 link modules with built-in fiber optic modems (range of up to 100 km/62 miles) or E1 link modules with xdsl modems (range of up to 10.6 km/6.6 miles) are available. These special links reduce the cost of local loop solutions by lowering equipment deployment and maintenance costs. The dual-trunk main link modules increase efficiency and provide 1:1 protective switching between the two links within 50 msec. The high-density 8-port E1, T1 and SHDSL modules increase the Megaplex TDM capacity of up to 16 Mbps. TDMoIP Main Link The unique ML-IP main link module converts the TDM bit stream delivered over the internal Megaplex back plane into IP packets, for transmission over IP networks. ML-IP features three Ethernet ports, with 10/100BaseT or 100BaseF interfaces. The module conforms to IEEE and 802.3u and provides reliable, high quality of service (QoS), including VLAN tagging and priority labeling (ToS). ML-IP places TDM timeslots into IP bundles with VLAN tagging required by point-to-multipoint applications. Duplicate bundles can be transmitted simultaneously on different paths for redundancy. I/O MODULES Up to 11 I/O modules of any kind can be placed in a MP-2100 chassis (up to 4 I/O modules in an MP-2104). If more I/O modules are required, Megaplex units can be cascaded. Tables 1 through 7 list the I/O modules available for MP-2100/2104(see enclosed data sheets for detailed specifications). High-Speed Data Modules High speed data interface modules provide leased line data services, operating at multiples of 56 or 64 kbps, up to Mbps, connecting routers, bridges, front-end processors, etc. E1 I/O modules with built-in xdsl modems enable cost-effective long-range deployment of high speed services over 2- or 4-wire copper lines. Range is up to 4.0 km. ISDN BRI ( U or S ) modules extend ISDN services over non-isdn facilities, supporting data, voice and Ethernet applications. The U interface modules employ IDSL technology for last mile applications. An IEEE C37.94-compliant n x 64 fiber data module is provided for transporting teleprotection data. Low Speed Data Modules Sub-rate multiplexer modules for low speed (2.4 to 19.2 kbps) synchronous and asynchronous data channels employ standard X.50, X.58 or SDM (DS0-B) multiplexing techniques. Low-speed modules with sync/async V.24/RS-232 channels, with independent channel rates of up to 64 kbps are available. End-to-end control signals are supported. Figure 5. Typical Point-to-Multipoint (Omnibus) Connection

7 Data Sheet Voice/Fax and Voice Compression Modules Voice/fax modules transmit voice at toll quality using standard PCM (ITU-T G.711), as well as ADPCM (G.726), MPMLQ (G.723.1), or P-CELP 4.8 kbps compression. Standard analog interfaces are available for direct connection to POTS, public payphones, LB (local battery) field phones, PBX extensions or 2/4-wire E&M trunks. Alternatively, voice compression modules with E1 and T1 digital PBX interfaces are available. Loop, wink and ground-start signaling are also supported. Digital voice compression modules connect PBX trunks with greater bandwidth utilization (compression ratio of up to 10:1). The modules employ a choice of high quality voice compression methods, including G at 6.4 kbps per channel, or G.729A at 8 kbps. The modules perform Group III fax and modem relay, at user-selectable standard rates of up to 14.4 kbps, featuring transparent timeslot transfer, voice activity detection, silence suppression, and comfort noise generation. Module versions are offered with single/dual T1 (up to 24/48 channels), or single/dual E1 (up to 30/60 channels) interfaces. Figure 6. GUI-based RADview Element Management System for Megaplex-2100/2104

8 Megaplex-2100/2104 A special omnibus module provides four toll-quality voice channels for applications (see Figure 4) where a master site needs to communicate with multiple remote stations simultaneously (such as to broadcast an important message). LAN Modules Ethernet router/bridge modules enable LAN to LAN extension over E1/T1 services, offering various L2 capabilities. MANAGEMENT Megaplex can be fully configured locally, using an ASCII terminal. It can also be managed remotely via Telnet, SNMP element management applications, or an end-to-end path management application. Megaplex communicates with the management station by means of its SNMP agent (via a SLIP/PPP or TCP/IP connection). Network management applications provide centralized control of all network nodes, including interface configuration, connection setup, alarms and monitoring. The user-friendly GUI-based RADview network management applications facilitate management of both individual units and entire networks. The RADview-SC/TDM application enables end-to-end path management of MAP devices, providing physical and logical graphic views of all network links and service paths of the system. The management connection can be established by the following methods: Out-of-band, using the Ethernet management port. This simple and efficient method takes advantage of IP bandwidth on demand, while saving link bandwidth for user traffic Inband over a dedicated timeslot, supporting standard PPP, FR encapsulation, and RIP2 protocols Over a modem link or over a FRAD, via the control port of the remote unit. DIAGNOSTICS Megaplex incorporates test features for rapid fault detection and easy maintenance. Upon power-up, all system and modules perform self-test. Any problems are reported to the management system. Loopbacks, BERTs and tone injections can be run on individual channels or main links, towards both the network and user side. The signaling monitoring capability useful for voice application diagnostics enables Megaplex to display a snapshot of the current ABCD signaling bit states of any selected timeslot that carries voice traffic. All alarms, including state and frequency of occurrence, are stored in the CL alarm status buffer. The last 256 alarms are kept in a separate alarm history buffer. Alarm status can be automatically read online by the management system from any node. User-set alarm masking, filtering and inversion, as well as 5-level prioritization are also performed. NEBS-COMPLIANT EQUIPMENT Megaplex-2100 is also offered in a special NEBS-compliant version which meets the Type-3 and Type-4 requirements, and permits reliable operation in harsher environmental conditions. Contact your authorized RAD partner for more information on NEBS-compliant equipment. Figure 7. NEBS-Compliant Megaplex-2100 Chassis

9 Data Sheet Figure 8. Megaplex-2014 Rear View Figure 9. Megaplex-2100 Rear View

10 Megaplex-2100/2104 I/O Modules The following tables present all the main link, I/O and system modules, supported by the Megaplex-2104 (2U-high) and Megaplex-2100 (4U-high) systems with the Version 12.xx CL.2 common logic module. For full module details and ordering information, see individual module data sheets. The following types of modules are available: Main Link Modules Low Speed Data I/O Modules High Speed Data I/O Modules Internetworking I/O Modules Voice/Fax I/O Modules System Modules Ringers. Table 1. Main Link Modules ML-8E1 ML-1E1 ML-2E1 MLF-1E1 MLF-2E1 MSL-8 ML-8T1 ML-1T1 ML-2T1 MLF-1T1 MLF-2T1 ML-IP ML-20N/1 ML-20N/2 8-port copper E1 interface modules. Feature full cross-connect, bypass and diagnostics. Equipped with integral user-enabled LTU and station clock interface. Single/dual copper E1 interface modules. Feature full cross-connect, bypass, R2 CAS, diagnostics and statistics. Equipped with integral user-enabled LTU and station clock interface. Enhanced diagnostics with BERTs (dual-port modules only), loopbacks, and tone injection per timeslot. Can display signaling bit state of any timeslot carrying voice. Support self-healing ring redundancy topology. Single/dual E1 interface modules with built-in fiber optic modems. Available with various fiber optic interface/connector combinations. Station clock interface provided (on single link module only). Support same features as described for ML-1E1/ML-2E1 above, including ring topology. SHDSL technology 8-E1 2-wire interface module extending the range of Megaplex to 10.6 km/3.5 miles over existing copper lines. Supports same features as described for M8E1 above. 8-port copper T1 interface modules. Feature full cross-connect, bypass (including multiframe synchronization) and diagnostics. Equipped with integral user-enabled CSU and station clock interface. Single/dual copper T1 interface modules. Feature full cross-connect, bypass (including multiframe synchronization), diagnostics and statistics. Equipped with integral user-enabled CSU and station clock interface. Enhanced diagnostics with BERTs (dual-port modules only), loopbacks, and tone injection per timeslot. Can display the signaling bit state of any timeslot carrying voice. Support self-healing ring redundancy topology. Single/dual T1 interface modules with built-in fiber optic modems. Available with various fiber optic interface/connector combinations. Station clock interface provided (on single link module only). Support same features as described for ML-1T1/ML-2T1 above, including ring topology. Provides standard 10/100 Mbps Ethernet connectivity for Megaplex, complying with all relevant IEEE Ethernet LAN standards. Uses RAD s TDMoIP technology to convert the Megaplex TDM bit stream into IP packets for transmission over IP networks. Features two Ethernet uplinks with choice of 10/100BaseT (UTP) or 100BaseF (fiber) interface and additional 10/100BaseT Ethernet user port. Employs Resilient Fast Ethernet Ring (RFER) technology to build Fast Ethernet networks with 50-msec self-healing link protection. One or two n x 64 kbps synchronous main links for direct connection to high-speed data service networks running at rates between 128 and 2048 kbps. Can provide link backup for E1 main links over high-speed digital data lines.

11 Data Sheet Table 2. Low Speed Data I/O Modules LS-6N LS-12 HS-RN* HS-DP/3 HS-DP/6 6 or 12 sync/async V.24/RS-232 data channels, with independent data rates from 2.4 to 64 kbps. Feature end-to-end control signal and BERT. LS-12 can bundle channels into two groups, each of which can be directed to a different main link, while LS-6N can bundle channels into one group only. Four low-speed sync/async data channels with data rates from 0.6 to 64 kbps (sync) or 38.4 kbps (async), including HDLC-based end-to-end control signaling. 3 or 6 OCU-DP (Office Channel Unit - Data Port) channels, operating at data rates of 2.4, 4.8, 9.6 and 56 kbps per channel. The OCU-DP interface directly connects to products with a built-in CSU/DSU. It is also used with standalone CSU/DSU products in DDS networks. The modules are compatible with AT&T PUB (Standard DDS), BELLCORE TA-TSY , and TR-TSY standards. Table 3. High Speed Data I/O Modules HS-2 HS-QN HS-703 HS-S HS-U* HS-U-6* HS-U-12* HSF-1* HSF-2* Two high speed synchronous data channels with V.35 or V.11/RS-422 (for V.36/RS-449, RS-530, X.21) interface, at data rates of n x 56 or n x 64 kbps, up to 1984 kbps. Four high speed synchronous data channels with V.35 or V.11/RS-422 (for V.36/RS-449, RS-530, X.21) interface, at data rates of n x 56 or n x 64 kbps, up to 1984 kbps. Four 64-kbps G.703 codirectional data channels. Four ISDN S -interface (2B+D) channels, operating as an ISDN channel extension, and providing ISDN leased line services over S interface, including power feeding. Four ISDN U -interface (2B+D) channels; for last mile solutions at ranges of up to 5.5 km/3.4 miles, and for ISDN channel extension including power feeding for remote NT-1. Automatic configuration download and full-duplex management, including remotely initiated BERTs and loopbacks, for ASMi-31 modems. Similar to the HS-U module above, but with 6 or 12 ISDN U -interface (2B+D) channels. D channel signaling information can be compressed to reduce bandwidth. One- or two-port 850 nm multimode fiber interface, with a capacity of up to kbps per port, for teleprotection equipment, complying with IEEE C37.94 requirements HS-6N* HS-12N* Similar to HS-Q/N, but with 6 or 12 high speed synchronous data channels, operating at data rates of n x 56 or n x 64 kbps, up to 1984 kbps. Feature enhanced clock mode and BERT. Any channel can be directed to any main link module.

12 Megaplex-2100/2104 Table 4. Voice/Fax I/O Modules VC-6 VC-6A VC-6/LB VC-4* VC-8* VC-16* VC-4A* VC-8A* VC-16A* VC-4/OMNI* VFS-24/T1* VFS-48/T1* VFS-30/E1* VFS-60/E1* Six analog voice channels using 64-kbps PCM encoding. Features EIA RS-464 loop-start signaling. E&M, FXS, FXO interface options available. Six analog voice channels using 64-kbps PCM or 32-kbps ADPCM compression. Suitable for various loop-start applications, PSTN applications, and public payphone applications. Features loop-start as well as ground-start signaling, reverse polarity for wink-start, and pulse-metering. E&M, FXS, FXO interface options available. Six analog voice channels for connecting between 2-wire local battery-powered (LB) military-type field telephones at different locations, point-to-point. A four-channel version is available for LB telephone connection via PBX extension lines. 4, 8 or 16 analog voice channels using 64-kbps PCM encoding, with E&M, FXS or FXO interface options. Suitable for various loop-start applications, PSTN applications, and public payphone applications (requiring wink-start signaling and pulse-metering). With VC-16, a single Megaplex-2100 unit can transmit up to 120 PCM voice channels (or up to 60 channels with Megaplex-2104). 4- or 8- analog voice channels using PCM (64-kbps) encoding or ADPCM (24 or 32-kbps) encoding, with E&M, FXS or FXO interface options. Suitable for various loop-start applications, PSTN applications, and public payphone applications (requiring wink-start signaling and pulse-metering). 16 analog voice channels using 64-kbps PCM or 32-kbps ADPCM compression. Transmits voice without any channel signaling, thus it is primarily intended for basic point-to-point applications which do not require signaling, or use only inband signaling (such as DTMF). Enables a single Megaplex-2100 unit to transmit up to 160 ADPCM voice channels (or up to 64 channels with Megaplex-2104). A special omnibus E&M interface module providing four toll-quality voice channels for applications where a master site needs to communicate with multiple remote stations simultaneously (such as to broadcast an important message). In addition to all features of the VF modules above, the VFS modules also act as voice and FAX relay compression servers, performing compression of analog voice channels within the same module. Table 5. Internetworking I/O Modules HS-ETH 1/2/4-channel Ethernet bridge/router module transmitting at data rates of n x 56/64 kbps (up to Mbps payload) per channel. Suitable for LAN to LAN extension applications. Provides up to four high-performance, remote, self-learning 10BaseT Ethernet bridge or IP router channels. Each channel terminates in a separate RJ-45 connector. Supports VLANs. 10/100BaseT Fast Ethernet bridge module also available. HS-ETH/SW* 4-channel 10/100BaseT Ethernet I/O module with a built in Layer-2 Ethernet switch, featuring VLAN support and double-tagging. Employs static routing, IP subnet switching over PPP, STP and RSTP protocols. WAN side transfers data at rates of 64 to 1536 kbps for T1 links, and 64 to 1920 kbps for E1 links. Total WAN capacity is up to 4096 kbps. * These I/O modules can utilize the 4 buses of MP-2100/2104(up to 124 timeslots) using any main link; other I/O modules can utilize up to 62 timeslots. HS-6N and HS-12N in conjunction with the ML-8E1/T1 modules can utilize the full TDM capacity of MP-2100/2104(up to 248 timeslots).

13 Data Sheet Table 6. System Modules CL.2 (Ver.12.xx) CL.2 common logic module for MP-2100/MP Available with choice of Ethernet BNC, Ethernet UTP or V.24 port for management. Can be ordered separately to provide redundancy for the CL module supplied with chassis, or for upgrading older systems. Note: Contact your local distributor for more information about system upgrades. ACM PS Alarm and diagnostics module with four outbound relays for reporting internal alarms to outside indicators such as bells, buzzers, etc. Eight inbound sensors enable external alarms or conditions to be reported to the Megaplex system. Power supply module for MP-2100 chassis. Supply 115 VAC, 230 VAC, -24 VDC or -48 VDC input. Can be ordered separately to provide redundancy for PS module supplied with chassis. Table 7. Ringers Ringer-2100R Ringer-2000 Ringer-2200N DC power supply module providing DC feed and ring voltages required by certain voice/fax modules or phantom feeding for ISDN modules installed in MP-2100 chassis. (MP-2104 chassis can be ordered with a built-in ringer.) Supports up to 32 active voice channels. DC power supply standalone unit providing DC feed and ring voltages required by certain voice/fax modules or phantom feeding for ISDN modules used by Megaplex. Can be mounted in a 19 rack. Supports up to 60 active voice channels. Enhanced DC power supply standalone unit providing DC feed and ring voltages required by certain voice/fax modules or phantom feeding for ISDN modules used by Megaplex. Can be mounted in a 19 rack. Supports up to 120 active voice channels.

14 Megaplex-2100/2104 Specifications Compliance E1: ITU-T Rec. G.704 and G.706, G.736 T1: AT&T TR-62411, ANSI T ITU-T Rec. G.703, G.704, and G.733 SHDSL: ITU-T Rec. G Ethernet : IEEE 802.3, 802.1p, 802.1Q, 802.3U CL.2 MODULE Serial Ports Interface: CONTROL DCE: RS-232 sync DCE port CONTROL DTE: RS-232 async DTE port (ordering option) Data Rate: 0.3, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, and 57.6 kbps Data Word Format 1 start bit 7 or 8 data bits Parity: none/odd/even 1 or 2 stop bits Connectors: CONTROL DCE: 9-pin D-type female CONTROL DTE: 25-pin D-type male Ethernet Port Type: 10BaseT or 10Base2 Connectors 10BaseT: 8-pin RJ-45 10Base2: 2 BNC Indicators ON: Lights steadily on the master (active) module; flashes when this module is in standby ALARM MAJ: Flashes when a major or critical alarm has been detected ALARM MIN: Lights steadily when any alarm has been detected TST: Lights when a test (or test loopback) is being performed in the local Megaplex system MAIN LINK AND I/O MODULES See respective data sheets Megaplex Chassis Comparison DIAGNOSTICS Tests Local main link loopback Local main link loop towards remote unit Local and remote BERT on channels, ports, bundles, individual timeslots and individual bits in a timeslot Local and remote loopbacks on channels, ports, and timeslots Forward and remote tone injection in individual timeslots (voice channels only) IP connectivity check (ping) Alarms Time and date stamped Last 256 alarms stored in RAM on CL module, readable by management system or terminal Current alarms status Statistics AT&T statistics when using ESF framing for T1 trunks, or CRC-4 multiframing for E1 trunks Performance statistics for bundles and LAN ports PHYSICAL MP-2100 (4U-high) 2 power supply module slots 2 CL module slots 12 slots for I/O and ML modules MP-2104 (Ver. 12.9) MP-2100 (Ver. 12.9) MP-4100 (Ver. 2.2) Feature Functionality Modular multiservice access multiplexer Modular multiservice access multiplexer Modular digital access cross-connect, Ethernet Aggregator and STM-1/OC-3 ADM Dimensions [cm] 9*44*33 18*44*33 18*44*33 Modularity Yes Yes Yes I/O slots Redundancy Yes Yes Yes Services LS, HS, Voice, ETH, TDMoIP LS, HS, Voice, ETH, TDMoIP LS, HS, Voice, E1/T1, xdsl, STM-1/OC-3, GbE, Fast Ethernet, fiber multiplexing, pseudowire Capacity 4 x E1/5 x T1 4 x E1/5 x T1 STM-1/OC-3 + 1GbE Management Interface RAD proprietary CLI RAD proprietary CLI Menu-driven

15 Data Sheet Height: 18 cm (7 in) (4U) Width: 44 cm (17 in) Depth: 33 cm (13 in) Weight: less than 17 kg (37 lb) MP-2104 (2U-high) Built-in power supply (optional built-in voice ringer or ISDN power feeder is available) 1 CL module slot 5 slots for I/O and ML modules Height: 9 cm (3.5 in) (2U) Width: 44 cm (17 in) Depth: 33 cm (13 in) Weight: less than 6 kg (13 lb) (All weights are for fully loaded units) POWER SUPPLIES Power Supply Input 110/115 VAC (85 to 150 VAC), 50/60Hz 220/230 VAC (150 to 264 VAC), 50/60Hz -48 VDC (-36 to -57 VDC) -24 VDC (-18 to -40 VDC) 24 VDC with floating ground (18 to 40 VDC) MP-2100 (without Ringer) Maximum Output Power: AC: 250W DC: 250W Maximum Input Power: AC: 250W DC: 350W Note: Maximum power consumption for a system with redundant power supplies is 250W. MP-2104 Maximum Output Power AC: 120W DC: 120W AC w/ringer: 300W DC w/ringer: 290W Maximum Input Power: AC: 160W DC: 160W AC w/ringer: 300W DC w/ringer: 350W GENERAL Front Panel Indicators ON LINE: Lights steadily when the corresponding PS module is on and the CL module is active TEST: Indicates that a test initiated by the local CL module is being performed ALARM: Lights steadily when an event or minor fault has been detected in the local MP-2100 system; flashes when a major and/or critical alarm has been detected Configuration By ASCII Terminal or PC, connected to terminal interface or via Telnet Using RADview SNMP management system Environment Operating temperature: -10 C to 55 C (14 F to 131 F) Storage temperature: -20 C to +70 C (-4 F to +158 F) Humidity: up to 95%, non-condensing Note: Actual operating temperature range is determined by the specific modules installed in the chassis, and might require special ordering options. If you need -20 C to 55 C (-4 F to 131 F) operating temperature support, contact Technical Services Dept.

16 Megaplex-2100/2104 Data Sheet Ordering BASIC UNITS Basic unit includes a chassis, single common logic module, single power supply and power supply cables. Main link and I/O modules are ordered separately (see separate module data sheets for details and ordering information). STANDARD CONFIGURATIONS MP-2100/115/2UTP MP-2100/115/R/2UTP MP-2100/230/2UTP MP-2100/230/R/2UTP MP-2100/48/2UTP MP-2100/48/R/2UTP MP-2100M-CL.2/UTP SPECIAL CONFIGURATIONS MP-2100/~/&/2# 4U-high chassis with 12 module slots and CL.2 common logic module MP-2104/~/+/2# 2U-high chassis with 5 module slots and CL.2 common logic module SYSTEM MODULES System modules can be ordered separately for redundancy or special requirements. MP-2100M-PS/~ Power Supply Module for MP-2100 MP-2100M-CL.2/# Common Logic Module Legend ~ Power supply input voltage: VAC VAC VDC 24/FLG 24 VDC with floating ground VDC & Redundancy (Default=1 x PS, 1 x CL) R Full (2 x PS, 2 x CL) + Built-in ringer (Default=without ringer) RI Built-in ringer # CL second management port (in addition to standard 9-pin DCE port) UTP Ethernet 10BaseT (UTP) BNC Ethernet 10Base2 (BNC) V24 V.24/RS-232 DTE SUPPLIED ACCESSORIES AC power cord (when AC power supply is ordered) DC adapter plug (when DC power supply is ordered) RM-MP-MX-23/19 Hardware kit for mounting one MP-2100 unit into both 19-inch and ETSI 23-inch racks RM-MP-2104-MN Hardware kit for mounting one MP-2104 unit into a 19-inch rack OPTIONAL ACCESSORIES CBL-SP-9/SH Standard DB-9 to DB-9 control port cable /12 (12.9) Specifications are subject to change without prior notice RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven, and the product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders. International Headquarters 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel Fax , market@rad.com North America Headquarters 900 Corporate Drive Mahwah, NJ 07430, USA Tel Toll free Fax market@rad.com Order this publication by Catalog No The Access Company

Megaplex-2100/2104 Modular Integrated Access Multiplexers

Megaplex-2100/2104 Modular Integrated Access Multiplexers Data Sheet Megaplex-2100/2104 Sub-DS0 multiplexer providing voice, data, Ethernet, and other unique services (teleprotection, omnibus) Multiple n x 64 kbps, SHDSL, E1/T1 or fractional E1/T1 main links,

More information

Megaplex-2100/2104. Data Sheet. Modular Integrated Access Multiplexers

Megaplex-2100/2104. Data Sheet. Modular Integrated Access Multiplexers Product page > Data Sheet -2100/2104 Multiple n x 64 kbps, E1/T1 or fractional E1/T1 main links, with combined TDM capacity of up to 8 Mbps (124 timeslots) 10/100-Mbps IP access link for transparent circuit

More information

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer Data Sheet Kilomux-2100/2104 Data, Voice, Fax and LAN Integrating Modular Multiplexer Maximized utilization of main-link bandwidth and high-quality low bit rate voice Fractional E1/T1, switched or leased

More information

Gmux Modular TDMoIP Gateway FEATURES

Gmux Modular TDMoIP Gateway FEATURES FEATURES Carrier-class modular TDMoIP gateway, extending high capacity TDM traffic over packet-switched networks (PSNs) Operates opposite other members of RAD s TDMoIP family of products, offering a complete

More information

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer FEATURES

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer FEATURES Data, Voice, Fax and LAN Integrating Modular Multiplexer FEATURES Modular integrating access multiplexer for data, voice, fax and LAN Maximized utilization of main-link bandwidth and high quality low bit

More information

FCD-E1, FCD-T1 E1/T1 or Fractional E1/T1 Access Units

FCD-E1, FCD-T1 E1/T1 or Fractional E1/T1 Access Units FCD-E1, FCD-T1 Access units for E1/T1 or fractional E1/T1 services Several data ports with selectable sync data rates: n 56/64 kbps Optional sub-e1/t1 drop-and-insert port for PBX connectivity Fail-safe

More information

HS-2. MEGAPLEX-2000/2100 Module. 2-Channel High Speed Data Module DESCRIPTION FEATURES

HS-2. MEGAPLEX-2000/2100 Module. 2-Channel High Speed Data Module DESCRIPTION FEATURES MEGAPLEX-2000/2100 Module HS-2 2-Channel High Speed Data Module FEATURES Supports two high speed data channels Programmable data rates up to 1,984 kbps in any multiple of 64 or 56 kbps User-selectable

More information

ASMi-52 2/4-wire SHDSL Modem/Multiplexer

ASMi-52 2/4-wire SHDSL Modem/Multiplexer Where to buy > See the product page > Data Sheet ASMi-52 Plastic Enclosure Metal Enclosure Rail-mount Metal Enclosure Dedicated managed SHDSL modem for Ethernet, E1 and serial services over 2- or 4-wire

More information

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer FEATURES

Kilomux-2100/2104. Data, Voice, Fax and LAN Integrating Modular Multiplexer FEATURES -2100/2104,, and LAN Integrating Modular Multiplexer FEATURES Modular integrating access multiplexer for data, voice, fax and LAN Advanced voice compression techniques maximize utilization of main link

More information

IPmux-1E TDM Pseudowire Access Gateway

IPmux-1E TDM Pseudowire Access Gateway Data Sheet IPmux-1E TDM circuit emulation over packet-switched networks Transporting E1, T1, ISDN and analog phone traffic over packet-switched networks Four FXS, FXO or E&M voice ports for standard analog

More information

E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router

E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router Data Sheet E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router Modular Integrated Access Device (IAD), providing bundled data, IP and telephony services over E1/T1 access lines E1/T1

More information

Optimux-34, Optimux-25

Optimux-34, Optimux-25 Data Sheet Optimux-34, Optimux-25 16-Channel E1/T1, Ethernet or Data over E3 or Fiber Multiplexers Up to 16 E1/T1 links and high-speed data or Ethernet traffic multiplexed into fiber opt7ic uplink E3 copper

More information

FCD-E1E Managed E1 and Fractional E1 Access Device

FCD-E1E Managed E1 and Fractional E1 Access Device FCD-E1E E1 main link and sublink supporting both framed and unframed signals One data port with selectable sync data rates of n 64 kbps Optional sub-e1 drop-and-insert port Optional Ethernet 10/100BaseT

More information

ASMi-52. 2/4-Wire SHDSL Modem FEATURES

ASMi-52. 2/4-Wire SHDSL Modem FEATURES FEATURES Dedicated managed SHDSL modem Operates over 2-wire and 4-wire lines, enabling service over any copper infrastructure Multiplexes of two data streams (E1, Ethernet, Serial) over SHDSL Utilizes

More information

Modular E1 or Fractional E1 Access Unit. Dial-out for alarm report The E1 main link can be supplied with the following options:

Modular E1 or Fractional E1 Access Unit. Dial-out for alarm report The E1 main link can be supplied with the following options: FEATURES E1 or Fractional E1 access unit Supports one data port with selectable sync data rates: n x 56, n x 64 kbps Optional sub-e1 drop & insert port for PABX connectivity Single slot supports MEGAPLEX

More information

2/4-wire SHDSL Modem/Multiplexer

2/4-wire SHDSL Modem/Multiplexer Data Sheet ASMi-52 SHDSL modem for effective provisioning of TDM and Ethernet data services at the rates of up to 4.6 Mbps Dedicated managed SHDSL modem for Ethernet, E1 and serial Ethernet and E1 or serial

More information

FCD-155. STM-1/OC-3 Terminal Multiplexer FEATURES

FCD-155. STM-1/OC-3 Terminal Multiplexer FEATURES FEATURES SDH/SONET terminal multiplexer for grooming LAN and legacy traffic (TDM) over SDH/SONET networks Demarcation point between the carrier and the customer networks GFP (G.7041), LAPS (X.85/86) encapsulation

More information

FCD-E1LC, FCD-T1LC Managed E1/T1 or Fractional E1/T1 Access Units

FCD-E1LC, FCD-T1LC Managed E1/T1 or Fractional E1/T1 Access Units Data Sheet FCD-E1LC, FCD-T1LC Managed TDM multiplexers for access to full or fractional E1/T1 services Managed access units for E1/T1 or fractional E1/T1 service E1/T1 main link and sublink support framed

More information

Kilomux-2100/2104 KVF.6 E1/T1 Voice Compression Module

Kilomux-2100/2104 KVF.6 E1/T1 Voice Compression Module Data Sheet Kilomux-2100/2104 KVF.6 Half or full PBX E1/T1 trunk compression Up to 186 voice channels in a single Kilomux-2100 chassis Group III Fax relay at up to 14.4 kbps, with automatic rate fallback

More information

Vmux-210 Analog Voice Trunking Gateway

Vmux-210 Analog Voice Trunking Gateway Where to buy > See the product page > Unique TDMoIP multiplexing, together with various voice compression algorithms, provides up to 16:1 compression for effective bandwidth utilization Fully transparent

More information

MARKET SEGMENTS AND APPLICATION

MARKET SEGMENTS AND APPLICATION Product page > Data Sheet Managed SHDSL.bis modem transmitting full-duplex at data rates of up to 5.7 Mbps over 2-wire, and 11.4 Mbps over 2/4-wire lines Dual Bearer mode enabling or V.35 service combination

More information

E1/T1 or Fractional E1/T1 Access Unit with Integrated Router

E1/T1 or Fractional E1/T1 Access Unit with Integrated Router Where to buy > See the product page > Data Sheet FCD-IP E1/T1 or Fractional E1/T1 Access Unit with Integrated Router Integrated access device providing bundled services over E1/T1 access lines Provides

More information

ASMi-54 SHDSL.bis Modem

ASMi-54 SHDSL.bis Modem Where to buy > See the product page > Metal Enclosure Plastic Enclosure Rail-mount Metal Enclosure Access with Ethernet Ring capabilities SHDSL.bis managed modem operating at full-duplex data rates of

More information

Optimux-1032, Optimux-1025

Optimux-1032, Optimux-1025 Where to buy > Product page > Data Sheet Optimux-1032, Optimux-1025 Fiber Optic Multiplexer for 16 E1/T1 and Gigabit Ethernet Multiplexes up to 16 E1/T1 with up to 3x10/100/1000 user Ethernet traffic over

More information

Where to buy > Product page >

Where to buy > Product page > Where to buy > Product page > Data Sheet.bis Modem.bis managed modem operating at full-duplex data rates of up to 5.7 Mbps per copper pair Ethernet service over 8-wire line of up to 22.8 Mbps in Point-to-Point,

More information

IPmux-1E. TDMoIP Gateway FEATURES

IPmux-1E. TDMoIP Gateway FEATURES IPmux-1E FEATURES TDMoIP gateway enabling E1, T1, ISDN, and analog phone communication over asynchronous IP and Ethernet networks Framed (full or fractional) and unframed E1/T1 user traffic Four FXS/E&M/FXO

More information

This provides an easily configurable solution, flexible enough to meet the specific requirements of a broad range of applications.

This provides an easily configurable solution, flexible enough to meet the specific requirements of a broad range of applications. Where to buy > Product page > Data Sheet, L Up to 28 T1 or 21 E1 channels multiplexed into a single 45 Mbps data stream Combination of T1 and E1 channels Transmission over coax or fiber optic cable Range

More information

Optimux-34 Fiber Optic Multiplexer

Optimux-34 Fiber Optic Multiplexer Data Sheet Optimux-34 Multiple E1, Ethernet, or High-speed Data over E3 or Fiber, up to 110 km (68 miles) Up to 16 E1 links, high-speed data, and Ethernet traffic multiplexed into one E3 copper or fiber

More information

ASMi-54L SHDSL.bis Modem

ASMi-54L SHDSL.bis Modem Where to buy > See the product page > Data Sheet ASMi-54L Managed modem transmitting full-duplex at data rates of up to 5.7 Mbps over 2-wire and 11.4 Mbps over 2/4-wire lines High-speed Ethernet and E1

More information

ASMi-54 SHDSL.bis Modem

ASMi-54 SHDSL.bis Modem Where to buy > See the product page > Data Sheet ASMi-54 Metal Enclosure Rail-mount Metal Enclosure Plastic Enclosure 19-inch Metal Enclosure High-end SHDSL.bis multiservice access equipment SHDSL.bis

More information

Vmux-2120 Voice Trunking Gateway

Vmux-2120 Voice Trunking Gateway Data Sheet Vmux-2120 Unique TDMoIP multiplexing, with various voice compression algorithms, provides up to 16:1 compression for effective bandwidth utilization Two channelized uplink ports for point-to-multipoint

More information

ASMi-54L. Data Sheet. SHDSL.bis Modem

ASMi-54L. Data Sheet. SHDSL.bis Modem Product page > Data Sheet Modem Managed modem transmitting full-duplex at data rates of up to 5.7 Mbps over 2-wire and 11.4 Mbps over 4-wire lines Dual Bearer mode for E1 and Ethernet HDLC Extended rates

More information

Optimux-1553 E3/T3 STM-1/OC-3 Terminal Multiplexer

Optimux-1553 E3/T3 STM-1/OC-3 Terminal Multiplexer Data Sheet Optimux-1553 STM-1/OC-3 terminal multiplexer for grooming high-order legacy traffic (TDM) over SDH/SONET networks Up to three E3 or T3 data channels multiplexed using a single hot-swappable

More information

IPmux-16 TDM Pseudowire Access Gateway

IPmux-16 TDM Pseudowire Access Gateway Data Sheet IPmux-16 TDM circuit emulation over packet-switched networks Robust TDM emulation over packet networks Single or dual 10/100BaseT or 100BaseFx uplink to the network, with redundancy at the Ethernet

More information

Kilomux Accessories KM-Ringer, Ringer-2000, Ringer-2200N DC Feed and Ring Power Supplies for Voice/Fax and ISDN Modules

Kilomux Accessories KM-Ringer, Ringer-2000, Ringer-2200N DC Feed and Ring Power Supplies for Voice/Fax and ISDN Modules Data Sheet Kilomux Accessories KM-Ringer, Ringer-2000, DC power supplies for Kilomux-2100 voice/fax and ISDN modules Compatible with all voice/fax modules with FXS interface DC feed (battery) and ringing

More information

RICi-E1, RICi-T1 Fast Ethernet over E1/T1 Intelligent Converters

RICi-E1, RICi-T1 Fast Ethernet over E1/T1 Intelligent Converters Connect Fast Ethernet LANs over E1 or T1 circuits Wire-speed packet forwarding 4 levels of QoS, based on four VLAN priority queues in accordance with 802.1p and IP Precedence Inband and out-of-band management

More information

Optimux-108, Optimux-106

Optimux-108, Optimux-106 Where to buy > Product page > Data Sheet Optimux-108, Multiplexer for 4E1/4T1 and Ethernet or Serial Data Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic link Various fiber

More information

ETX-102 Carrier Ethernet Demarcation Device

ETX-102 Carrier Ethernet Demarcation Device Data Sheet ETX-102 Smart demarcation point between the service provider and customer networks SLA monitoring to assure delivery of contracted Ethernet services VLAN bridging and stacking with P-bit, DSCP,

More information

Kilomux-2100/2104 KVF.8 8-Channel Analog Voice Compression Module

Kilomux-2100/2104 KVF.8 8-Channel Analog Voice Compression Module Data Sheet Kilomux-2100/2104 KVF.8 Up to 96 analog voice channels in a single Kilomux-2100/2104 chassis Group III Fax relay at up to 14.4 kbps, with automatic rate fallback V.22 bis and V.32 bis modem

More information

Optimux-4T1 Four-Channel T1 Multiplexer

Optimux-4T1 Four-Channel T1 Multiplexer Data Sheet Optimux-4T1 Any Traffic Over Fiber Multiplexes four T1 channels over a fiber optics link with various fiber interfaces: multimode, single-mode (up to 120 km), and single-mode over single fiber

More information

Vmux-110. Voice Trunking Gateway FEATURES

Vmux-110. Voice Trunking Gateway FEATURES Vmux-110 FEATURES Integrates voice and data over packet networks Connects one E1/T1 digital or four/eight (FXS/FXO/E&M) analog voice ports over a serial, TDM or 10/100BaseT uplink Second Ethernet port

More information

FOMi-40 Fiber Optic Modem with Remote Management

FOMi-40 Fiber Optic Modem with Remote Management Data Sheet FOMi-40 Provides a secure and long-range data link of up to 100 km (62 mi) Selectable data rates from 56 to 2048 kbps Multimode or single mode operation Extended transmission range up to 100

More information

IPmux-11. TDMoIP Gateway DESCRIPTION FEATURES

IPmux-11. TDMoIP Gateway DESCRIPTION FEATURES IPmux-11 DESCRIPTION FEATURES TDMoIP CPE (Customer Premises Equipment) for the small and medium-sized enterprise sites, offering TDM leased line extension over a packet switched network and controlled

More information

Gmux-2000 Hub-Site Pseudowire and Voice Trunking Gateway

Gmux-2000 Hub-Site Pseudowire and Voice Trunking Gateway Data Sheet Gmux-2000 Scalable, carrier-class, multiservice pseudowire gateway converging TDM services over PSNs High capacity modular pseudowire gateway, transporting TDM traffic over packet-switched networks

More information

Vmux-110 Voice Trunking Gateway for Remote Sites

Vmux-110 Voice Trunking Gateway for Remote Sites Where to buy > See the product page > Data Sheet Vmux-110 Compressing one E1/T1 or four/eight analog (FXS/FXO/E&M) voice ports, and transmitting them over a serial, fractional E1/T1, or a 10/100BaseT uplink

More information

RAD KILOMUX-2100/2104

RAD KILOMUX-2100/2104 Page 1 of 10 RAD KILOMUX-2100/2104 FEATURES Integrating access multiplexer for data, voice, fax and LAN Maximizes utilization of main link bandwidth Main link data rates from 9.6 to 768 kbps Connects to

More information

MARKET SEGMENTS AND TYPICAL

MARKET SEGMENTS AND TYPICAL Where to buy > Product page > Data Sheet Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution

More information

Megaplex-4100 Next Generation Multiservice Access Node

Megaplex-4100 Next Generation Multiservice Access Node Data Sheet Megaplex-4100 Gigabit Ethernet and/or STM-1/OC-3 uplinks Ethernet and TDM Central/Aggregation Solution Ethernet over copper, fiber or DSL aggregator STM-1/OC-3 ADM (add/drop multiplexer) 4/1/0

More information

Optimux-1553 STM-1/OC-3 Terminal Multiplexer

Optimux-1553 STM-1/OC-3 Terminal Multiplexer Data Sheet Optimux-1553 STM-1/OC-3 terminal multiplexer for grooming high order legacy traffic (TDM) over SDH/SONET networks Any Traffic Over Fiber Multiplexes up to three E3 or T3 data channels using

More information

Vmux-400 GSM A-bis/A-ter Optimization Gateway

Vmux-400 GSM A-bis/A-ter Optimization Gateway Data Sheet Vmux-400 GSM A-bis/A-ter interface optimization of voice with up to 3:1 average bandwidth optimization Connects up to two E1/T1 digital GSM ports over a single E1/T1, serial, or Ethernet 10/100BaseT

More information

Megaplex-4100 Next Generation Multiservice Access Node

Megaplex-4100 Next Generation Multiservice Access Node Data Sheet Megaplex-4100 Ethernet and TDM Central/Aggregation Solution Gigabit Ethernet and/or STM-1/OC-3 links Ethernet over copper, fiber or DSL aggregator STM-1/OC-3 ADM (add/drop multiplexer) 4/1/0

More information

ACE-2002, ACE-2002E. Multiservice Access Concentrators/ ATM Network Termination Units FEATURES

ACE-2002, ACE-2002E. Multiservice Access Concentrators/ ATM Network Termination Units FEATURES Multiservice Access Concentrators/ ATM Network Termination Units FEATURES Multiservice/ATM network demarcation device or access concentrator (ACE-2002), cellular access concentrator () Offer converged

More information

Optimux-108, Optimux-106 Four-Channel E1/T1 and Ethernet Multiplexers

Optimux-108, Optimux-106 Four-Channel E1/T1 and Ethernet Multiplexers Data Sheet Optimux-108, Optimux-106 Fiber Multiplexers, Transmit Any Traffic over Fiber Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic link Various fiber interfaces: multimode,

More information

modules in the MP-4100/4104 chassis (E1/T1, SHDSL, data or voice ports) into IP or MPLS packets for transmission over Ethernet, IP or MPLS networks.

modules in the MP-4100/4104 chassis (E1/T1, SHDSL, data or voice ports) into IP or MPLS packets for transmission over Ethernet, IP or MPLS networks. Where to buy > Product page > Data Sheet Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution

More information

FCD-155 STM-1/OC-3 Terminal Multiplexer

FCD-155 STM-1/OC-3 Terminal Multiplexer Data Sheet FCD-155 Transports LAN and TDM traffic over SDH/SONET networks STM-1/OC-3 PDH/Ethernet terminal multiplexer grooms LAN and legacy (TDM) traffic over SDH/SONET networks 10/100BaseT and GbE (Gigabit)

More information

Where to buy > Product page > (E1/T1, SHDSL, data or voice ports) into IP or MPLS packets for transmission over Ethernet, IP or MPLS networks.

Where to buy > Product page > (E1/T1, SHDSL, data or voice ports) into IP or MPLS packets for transmission over Ethernet, IP or MPLS networks. Where to buy > Product page > Data Sheet Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution

More information

FCD-155. STM-1/OC-3 Terminal Multiplexer DESCRIPTION FEATURES

FCD-155. STM-1/OC-3 Terminal Multiplexer DESCRIPTION FEATURES DESCRIPTION FEATURES STM-1/OC-3 PDH/Ethernet terminal multiplexer for grooming LAN and legacy (TDM) traffic over SDH/SONET networks Ethernet traffic maps to: One VC-3/VC-4/STS-1 Up to 3 VC-3/STS-1 Up to

More information

LA-140. Advanced ATM IAD FEATURES

LA-140. Advanced ATM IAD FEATURES Advanced IAD FEATURES Offers voice, data and LAN to small and medium size businesses over single access line On the user side, supports up to 12 modular analog voice channels, 12 ISDN S0, E1/T1 port, a

More information

LRS-12. "Last Mile" SNMP Modem Rack FEATURES

LRS-12. Last Mile SNMP Modem Rack FEATURES "Last Mile" SNMP Modem Rack FEATURES Accommodates any combination of 12 HDSL, copper or fiber optic modem cards SNMP management agent Supports modems with or without integrated SNMP agent Management running

More information

DXC /1/0 modular multiservice cross connect access node up to 1.2 Gbps matrix. Data Sheet. Multiservice Access Node. The Access Company

DXC /1/0 modular multiservice cross connect access node up to 1.2 Gbps matrix. Data Sheet. Multiservice Access Node. The Access Company Data Sheet 3/1/0 modular multiservice cross connect access node up to 1.2 Gbps matrix Modular Carrier class 3/1/0 non-blocking cross-connect 256 Mbps to 1.2 Gbps matrix Expandable (stackable) 6U-high units

More information

IPmux-14. TDMoIP Gateway FEATURES DESCRIPTION

IPmux-14. TDMoIP Gateway FEATURES DESCRIPTION FEATURES TDMoIP CPE (Customer Premises Equipment), offering TDM leased line extension over a packet switched network (PSN) and controlled Ethernet access TDMoIP technology, implementing the emerging IETF,

More information

VB-8030/8034. Hybrid Ethernet/TDM Central Aggregation Solution Platform for Seamless and Economical Migration to Next-Generation Communication

VB-8030/8034. Hybrid Ethernet/TDM Central Aggregation Solution Platform for Seamless and Economical Migration to Next-Generation Communication Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution aggregating Ethernet and TDM services

More information

Where to buy > Product page >

Where to buy > Product page > Where to buy > Product page > Data Sheet Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution

More information

FCD-155 STM-1/OC-3 Terminal Multiplexer

FCD-155 STM-1/OC-3 Terminal Multiplexer Where to buy > See the product page > Data Sheet Groomed LAN and legacy (TDM) traffic over SDH/SONET networks VLAN and point-to-multipoint switching Transports LAN and TDM traffic over SDH/SONET networks

More information

Optimux-108, Optimux-106

Optimux-108, Optimux-106 Product page > Data Sheet Optimux-108, Multiplexer for 4E1/4T1 and Ethernet or Serial Data Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic link Various fiber interfaces: multi,

More information

IPmux-4LGE TDM Pseudowire Gateway

IPmux-4LGE TDM Pseudowire Gateway Where to buy > See the product page > Data Sheet IPmux-4LGE Legacy over PSN solution for transmitting E1 streams over packet switched networks Comprehensive support for pseudowire/circuit emulation standards

More information

FCD-155 STM-1/OC-3 Terminal Multiplexer

FCD-155 STM-1/OC-3 Terminal Multiplexer Data Sheet FCD-155 Transports LAN and TDM traffic over SDH/SONET networks Groomed LAN and legacy (TDM) traffic over SDH/SONET networks VLAN and point-to-multipoint switching Ethernet traffic mapped to

More information

Installation and Operation Manual ML-IP. TDMoIP Main Link Module. MP-2100 Version 11 MEGAPLEX-2100 MODULE

Installation and Operation Manual ML-IP. TDMoIP Main Link Module. MP-2100 Version 11 MEGAPLEX-2100 MODULE Installation and Operation Manual ML-IP TDMoIP Main Link Module MP-2100 Version 11 MEGAPLEX-2100 MODULE ML-IP TDMoIP Main Link Module for MP-2100 Version 11 Installation and Operation Manual Notice This

More information

ETX-201A Carrier Ethernet Demarcation Device

ETX-201A Carrier Ethernet Demarcation Device Data Sheet ETX-201A Carrier Demarcation Device Smart demarcation point between the service provider and customer networks Carrier demarcation device delivering business services over fiber infrastructure

More information

Multiservice Network Termination Unit

Multiservice Network Termination Unit Order from Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com Data Sheet Extending the reach of Ethernet LANs and TDM services over ATM networks Transparent LAN services (TLS) and

More information

RICi-16 Ethernet over Bonded PDH Network Termination Unit

RICi-16 Ethernet over Bonded PDH Network Termination Unit Data Sheet RICi-16 Connects Fast Ethernet LANs transparently over TDM infrastructure Transports Ethernet traffic over 16 bonded E1 or T1 ports or two clear channel T3 ports using Ethernet over NG-PDH protocols

More information

Optimux-108, Optimux-106

Optimux-108, Optimux-106 Where to buy > See the product page > Data Sheet OP-108 RAD Optimux-108 Fiber Multiplexers, Transmit Any Traffic over Fiber Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic

More information

ATM OVER PACKET CAPABILITIES

ATM OVER PACKET CAPABILITIES ACE-3000 Family ACE-3600 3G and HSDPA traffic backhauling over packet-switched networks Pseudowire emulation of up to four protected STM-1/OC-3c (ATM) links over Gigabit Ethernet Advanced pseudowire connectivity

More information

3630 MAINSTREET. Intelligent, high perfomance multiplexing that terminates up to 31 voice or data circuits. PRIMARY RATE MULTIPLEXER Release 5.

3630 MAINSTREET. Intelligent, high perfomance multiplexing that terminates up to 31 voice or data circuits. PRIMARY RATE MULTIPLEXER Release 5. 3630 MAINSTREET PRIMARY RATE MULTIPLEXER Release 5.3 Alcatel s 3630 MainStreet Primary Rate Multiplexer (PRM) serves as a gateway on the customer premises to primary rate facilities for a wide range of

More information

TDM Access (Multiservice Access Platform) 3

TDM Access (Multiservice Access Platform) 3 TDM Access (Multiservice Access Platform) 3 T D M A c c e s s ( M A P ) While many vendors are terminating their legacy multiservice TDM products, RAD Data Communications continues to offer carriers, telecom

More information

HS-RN. 4-Channel Low Speed Data Module with End-to-End Signaling OPERATION MANUAL INSTALLATION AND

HS-RN. 4-Channel Low Speed Data Module with End-to-End Signaling OPERATION MANUAL INSTALLATION AND INSTALLATION AND OPERATION MANUAL HS-RN 4-Channel Low Speed Data Module with End-to-End Signaling Megaplex-2100/2104 Version 12, Megaplex-4100 Version 1.2 The Access Company HS-RN 4-Channel Low Speed

More information

FCD-155E STM-1/OC-3 Add/Drop Multiplexer

FCD-155E STM-1/OC-3 Add/Drop Multiplexer Data Sheet FCD-155E STM-1/OC-3 add/drop multiplexer that transports LAN and traditional (TDM) traffic over SDH/SONET networks STM-1/OC-3 PDH/Ethernet add/drop multiplexer for grooming LAN and legacy (TDM)

More information

IPmux-14. TDM Pseudowire Access Gateway FEATURES

IPmux-14. TDM Pseudowire Access Gateway FEATURES FEATURES TDM pseudowire CPE/CLE, offering TDM circuit emulation over a packet-switched network (PSN) and controlled Ethernet access Built on TDMoIP technology, implementing the emerging IETF, MFA Forum,

More information

RICi-16 Ethernet over Bonded PDH Network Termination Unit

RICi-16 Ethernet over Bonded PDH Network Termination Unit Data Sheet RICi-16 Connects Fast Ethernet LANs transparently over TDM infrastructure Transports Ethernet traffic over 16 bonded E1 or T1 ports or two clear channel T3 ports using Ethernet over NG-PDH protocols

More information

Metroplex 6000/T1 Global T1 Access Multiplexer HIGHLIGHTS Metroplex 6000 System Overview Diverse Applications Unified System Architecture

Metroplex 6000/T1 Global T1 Access Multiplexer HIGHLIGHTS Metroplex 6000 System Overview Diverse Applications Unified System Architecture Global T1 Access Multiplexer HIGHLIGHTS Two T1 interfaces using wideband technology Modular, scalable architecture reduces equipment investment and field repair time Supports a variety of voice and data

More information

SFP Transceivers Small Form-Factor Pluggable Transceivers

SFP Transceivers Small Form-Factor Pluggable Transceivers Data Sheet SFP Transceivers Fiber optic/electrical transceivers and System-on-an-SFP miniature converters Fiber optic or electrical transceiver units, providing pluggable interfaces according to known

More information

Installation and Operation Manual VF-30/VF-60. Single/Dual E1 Digital Voice Compression Modules. Megaplex-2100 Version 11 MEGAPLEX-2100 MODULES

Installation and Operation Manual VF-30/VF-60. Single/Dual E1 Digital Voice Compression Modules. Megaplex-2100 Version 11 MEGAPLEX-2100 MODULES Installation and Operation Manual VF-30/VF-60 Single/Dual E1 Digital Voice Compression Modules Megaplex-2100 Version 11 MEGAPLEX-2100 MODULES VF-30/VF-60 Single/Dual E1 Digital Voice Compression Modules

More information

MARKET SEGMENTS AND TYPICAL

MARKET SEGMENTS AND TYPICAL Product page > Data Sheet Carrier-class multiservice platform: Ethernet services, high speed, low speed, analog voice, data, fiber multiplexing and pseudowire connectivity Central solution aggregating

More information

FCD-155E STM-1/OC-3 Add-Drop Multiplexer

FCD-155E STM-1/OC-3 Add-Drop Multiplexer Where to buy > See the product page > Data Sheet STM-1/OC-3 add/drop multiplexer that transports LAN and traditional (TDM) traffic over SDH/SONET networks STM-1/OC-3 PDH/Ethernet add/drop multiplexer for

More information

SFP Transceivers Small Form-Factor Pluggable Transceivers

SFP Transceivers Small Form-Factor Pluggable Transceivers Data Sheet SFP Transceivers Fiber optic/electrical transceivers and System-on-an-SFP miniature converters Fiber optic or electrical transceiver units, providing pluggable interfaces according to known

More information

LA-110 Advanced Integrated Access Device

LA-110 Advanced Integrated Access Device Data Sheet LA-110 Provide voice, data and LAN services over ATM or packet-switched networks, with DSL interfaces Offers multiple services over ATM or PSN Supports standard-compliant pseudowire (PW) with

More information

OPERATION MANUAL INSTALLATION AND ML-8E1, ML-8T1. 8-Port Main Link E1 and T1 Modules. Megaplex-2100/2104 Version 12. The Access Company

OPERATION MANUAL INSTALLATION AND ML-8E1, ML-8T1. 8-Port Main Link E1 and T1 Modules. Megaplex-2100/2104 Version 12. The Access Company INSTALLATION AND OPERATION MANUAL ML-8E1, ML-8T1 8-Port Main Link E1 and T1 Modules Megaplex-2100/2104 Version 12 The Access Company ML-8E1, ML-8T1 8-Port Main Link E1 and T1 Modules Megaplex-2100/2104

More information

IPmux-2L, IPmux-4L. IPmux-2L, IPmux-4L are a TDM pseudowire. also serves as an Ethernet-based access device.

IPmux-2L, IPmux-4L. IPmux-2L, IPmux-4L are a TDM pseudowire. also serves as an Ethernet-based access device. Where to buy > See the product page > Data Sheet IPmux-2L, IPmux-4L Legacy over PSN solution for transmitting E1 streams over packet switched networks Comprehensive support for pseudowire/circuit emulation

More information

Note: IPmux-155L equipped with the AC or 48 power supply modules supports up to 16 MiRICi-E3T3 units.

Note: IPmux-155L equipped with the AC or 48 power supply modules supports up to 16 MiRICi-E3T3 units. High capacity pseudowire gateway, transporting TDM traffic (fully populated channelized STM-1 stream or up to 32 E1 channels) over packet-switched networks Pseudowire technology, compliant with IETF, MFA

More information

Nokia 7705 Service Aggregation Router

Nokia 7705 Service Aggregation Router Nokia 7705 Service Aggregation Router Legacy Interface Adapter Cards As communications networks and applications are rapidly migrating to IP/MPLS and Ethernet infrastructures, many mission-critical and

More information

IPmux-24 TDM Pseudowire Access Gateway

IPmux-24 TDM Pseudowire Access Gateway IPmux-24 TDM circuit emulation over packet-switched networks Comprehensive support for pseudowire/circuit emulation standards including TDMoIP, CESoPSN, SAToP and HDLCoPSN Industry-leading adaptive clock

More information

Airmux-400, Airmux-5000 Optional Accessories

Airmux-400, Airmux-5000 Optional Accessories Data Sheet, Optional Accessories Airmux-IDU-H Airmux-HSSU Airmux-OPOE/DC Aimux-MHS-kit Airmux-PoE/GbE Airmux-Lightning-Protection Aimux-PoE/GBE/DC Aimux-PoE/DC Airmux-GSU Airmux-FE-Repeater , Optional

More information

Using RAD Vmux voice trunking over FleetBroadband

Using RAD Vmux voice trunking over FleetBroadband Using RAD Vmux voice trunking over FleetBroadband Version 01 22 October 2007 inmarsat.com/fleetbroadband Whilst the information has been prepared by Inmarsat in good faith, and all reasonable efforts have

More information

F8016. Fiber Modem for up to 4E1 /8E1/12E1/16E1 + RS232+Ethernet+ optional V.35/QFXS/QFXO

F8016. Fiber Modem for up to 4E1 /8E1/12E1/16E1 + RS232+Ethernet+ optional V.35/QFXS/QFXO F8016 Fiber Modem for up to 4E1 /8E1/12E1/16E1 + RS232+Ethernet+ optional V.35/QFXS/QFXO Description The fiber transmission platform is a fiber optic multiplexer with a fully new designing concept to challenge

More information

ETX-203AX Carrier Ethernet Demarcation Device

ETX-203AX Carrier Ethernet Demarcation Device Where to buy > See the product page > Data Sheet ETX-203AX Feature-rich demarcation point for SLA-based Ethernet business services Feature-rich Carrier Ethernet demarcation device delivering TDM-like experience

More information

PSEUDOWIRE PERFORMANCE

PSEUDOWIRE PERFORMANCE Legacy over PSN solution for transmitting E1 streams over packet switched networks Comprehensive compliance with pseudowire/circuit emulation standards including TDMoIP, CESoPSN, SAToP and HDLCoPSN Built

More information

MEGAPLEX-2100 MODULE LS-2A. 10/6-Channel Sync/Async Low Speed Data Module for X.50, X.58 or SDM Multiplexing Installation and Operation Manual.

MEGAPLEX-2100 MODULE LS-2A. 10/6-Channel Sync/Async Low Speed Data Module for X.50, X.58 or SDM Multiplexing Installation and Operation Manual. MEGAPLEX-200 MODULE LS-2A 0/6-Channel Sync/Async Low Speed Data Module for X50, X58 or SDM Multiplexing Installation and Operation Manual Notice This manual contains information that is proprietary to

More information

3612 MAINSTREET. NARROWBAND MULTIPLEXER Release 8.0

3612 MAINSTREET. NARROWBAND MULTIPLEXER Release 8.0 3612 MAINSTREET NARROWBAND MULTIPLEXER Release 8.0 Alcatel s 3612 MainStreet Narrowband Multiplexer (NBM) provides highly flexible delivery of multiple services to remote small/medium branch sites or acts

More information

Product page > Link-layer OAM according to IEEE 802.3ah is used for fault indication and loopback activation response.

Product page > Link-layer OAM according to IEEE 802.3ah is used for fault indication and loopback activation response. Product page > Data Sheet Comprehensive compliance with pseudowire/circuit emulation standards including TDMoIP, CESoPSN, SAToP, CESoETH and HDLCoPSN Industry-leading adaptive clock recovery mechanism

More information

ACE-202/2002/2002E ATM STM-1, STM-4, IMA and ATM UNI Modules

ACE-202/2002/2002E ATM STM-1, STM-4, IMA and ATM UNI Modules Data Sheet ACE-202/2002/2002E ATM Fiber optic and electrical ATM modules for a wide variety of multiservice applications Used as I/O to public ATM switches or private ATM devices Protection capabilities

More information