INDUSTRIAL Rack-Mount Layer-3 MANAGED Modular Gigabit Ethernet PoE SWITCH. RHG7628 Series FEATURE HIGHLIGHTS PRODUCT DESCRIPTION

Transcription

1 RHG7628 Series INDUSTRIAL Rack-Mount Layer- MANAGED Modular Gigabit Ethernet SWITCH FEATURE HIGHLIGHTS Maximum 28Gbps switching capacity, 95.2Mpps throughput Rugged industrial design for -0~75 C harsh environment operation Flexible modular configuration, Module-dedicated slots Up to 2 ports, with maximum 720W of power budget x Gigabit or x 0 Gigabit SFP Uplink slots Up to 5 possible configurations in power input versions ITU-T G.802 ERPS Ring, RSTP, or MRP (client) redundancy RIP, OSPF, Static Routing, PIM supported Layer- switching PROFINET v2. Conformance Class B Certified, Provides GSD Description file PRODUCT DESCRIPTION Flexible: Atop s high-density RHG7628 Managed Rack-mount switch will provide you the flexibility your application needs. You will be able to choose among 6 different Layer- Routing Core versions (based on power supply and uplink port configurations) and five different /8-Port modules and customize your device in a very simple way. Designed for, in wide temperature: RHG7628 supports up to 2 Gigabit ports in any 8 or -port multiple configuration. Specifically designed for bringing power through Ethernet cable virtually anywhere, a maximum output Power over Ethernet of 720W over the 2 ports is allowed (/+ configuration af/at). Available in power input variants, it is EN :2006 certified and designed to handle the harshest environments. Its fanless design and EMC Level protection guarantee operations within -0 and +75 C, with 2 ports running full power and makes it suitable to be used for almost every application. Powerul and versatile: RHG7628 supports IPv Static Routing, RIPv/v2, OSPFv2, IGMP, IGMP Snooping, PIM Dense Mode and Sparse Mode, DVMRP and VRRP for Routing Redundancy. Then, it embeds all features of RHG7528 (layer-2 version), allowing (through ERPS) network self-recovery down to 20ms on full load. Almost any redundant ring topology is supported, such as ITU-T G.802 ERPS Ring, IEEE802.D-200 RSTP, STP, MSTP, MRP (Client), ia-ring, ia-chain and many compatible rings. Endless additional features are provided. Automation and IoT ready: Being Profinet CC-B v2. certified and Ethernet/IP ready make RHG7628 the perfect candidate for being the backbone of your Industrial automation. Secure: The first Industrial Managed Secure Switch! Protect your LAN from Eavesdropping and impesronation through 802.AE MACsec. With no additional latency and 00% Gigabit Throughput guarantee, dedicated modules can provide you the internal ultimate security solution. TEL : FAX:

2 APPLICATION CASE What is MACsec? IEEE 802.AE protocol (MACsec) provides to the components that support it- authentication, integrity and confidentiality using strong crypto (AES-28 bit). Being the communication encrypted from hop-to-hop (so, decrypted upon receipt and encrypted again with a different key- before forwarding), it can protect your network not only for wiretapping, masquerading, man-in-the-middle attacks and denial-of-service, but also from impersonation and replay attacks. And that s not all. Being the encryption carried out by hardware, the full Gigabit Bandwidth is preserved and no additional latency is added to the network! Network Analyzer Encrypted Encrypted Encrypted Encrypted Workstation Server Network Analyzer Application example In the below network diagram you can see how easy it is to exploit all features of RHG7628. Different Switches are interconnected through a 0 Gigabit Ethernet Fiber backbone in an OSPFv2 Mesh. The device on the left for example powers through /+ IPcam surveillance System, provides Industrial-Grade connectivity to the Factory and -through a secured, encrypted, connection- guarantees confidentiality to the information. The device on the right bridges the secure connection to the office, ensuring Gigabit-speed, no latency data security. Industrial Network Storage / + powered IPcam surveillance EHG208 Smart Secure Switch 8-RJ5 8-RJ5 non- M -RJ5 MACsec RHG7628-CPU-0GSFP-X x 0G SFP M -RJ5 MACsec 8-RJ5 non- 8-RJ5 non- RHG7628-CPU-0GSFP-X DATA FLOW Copper - 0/00/000 Copper - 0/00/000 /+ Fiber - 0 GbE Backbone Copper - 0/00/000 MACsec OSPF Metro Network on 0GbE Fiber Backbone TEL : FAX:

3 CONFIGURATION EXAMPLE How does it work? RHG7628 configuration is as easy and immediate as you can imagine: pick any Core CPU unit from the catalogue, choosing among different power supply configurations and uplink speeds (RHG7628 provides module-slots and SFP uplinks, in either GbE or 0GbE speed). Then, choose the modules you want based on your needs. Install the modules and Power on! It s all done. Just jump to Web, Console or Telnet configuration! RHG7628-CPU-0GSFP-R Layer- Core unit, with x 0 Gigabit SFP uplink slots and redundant AC power input RHG7X28-8-port Gigabit RJ5 module RHG7X28-M2 8-port Gigabit RJ5 module 2 port Layer- Managed Switch, with 8 Gigabit ports, 8 Gigabit RJ5 ports, 00/000 MACsec secure SFP slots and x /0 GbE SFP uplink slots RHG7X28-M5 port 00/000 SFP MACsec module TEL : FAX:

4 Relay2R Relay2R elay elay Relay2 Relay 2 P WR2P oe PWR 2 2 P WR2P oe PWR M2 M M P WR2P oe PWR PWR2 G + F.G. + F.G. 2 Console 2 PWR P P2 P P2 PWR PWR Run Ring R.M. ALM Reset DIMENSIONS & LAYOUT 82,6 6,5,8 6 Switch core module 0 0 M2 M M M5 9,5 Modules 0, SPECIFICATIONS Switch core Technical Specifications Model Name Switch Properties Priority Queues VLAN Table MAC-Based VLAN VLAN ID Range Static IGMP Groups Dynamic IGMP Groups MAC Table Size Packet Buffer Size Jumbo Frame Switching Fabric Capacity Maximum throughput RHG VID to k.5 MB 926 Byte 56 Gbps (G uplinks) / 28 Gbps (0G uplinks).67 Mpps (G uplinks) / 95.2 Mpps (0G uplinks) TEL : FAX:

5 Ethernet Standards Protocols Redundancy Time Synchronization Layer- Switching Protocols Automation Profiles MIB IEEE 802. for 0BaseT IEEE 802.u for 00BaseT(X) IEEE 802.ab for 000BaseT(X) IEEE 802.z for 000BaseX IEEE 802.ae For 0 Gigabit Ethernet Fiber IEEE 802.x for Flow Control, back pressure flow control IEEE 802.D-200 for Spanning Tree Protocol IEEE 802.w for Rapid Spanning Tree Protocol IEEE 802.s for Multiple Spanning Tree Protocol IEEE 802.Q for VLAN Tagging IEEE 802.p for Class of Service IEEE 802.X for Authentication IEEE 802.ae for MAC security (MACsec) on RHGM-RHGM5 only IEEE 802.ad for Port Trunk with LACP IEEE 802.az for Energy Efficient Ethernet IPv, IPv6, IGMPv/v2/v, IGMP Snooping, GARP, GMRP, GVRP, SNMPv/v2c/ v, SNMP Inform, ICMP, Telnet, SSH, DHCP Relay/Client/IP-port-mapping, DHCP Option 66/67/82, BootP, RARP, TFTP, SMTP, SMTP (Gmail), RMON, HTTP, HTTPS, Syslog, MRP (Client),LLDP,802.x,EAP,RADIUS,TACACS+,Mirror port, QoS, ACL ITU-T G.802 ERPS Ring, STP, RSTP, MSTP, Compatible Ring/Chain, U-Ring Network Synchronization Precision Network Synchronization NTP Server/Client, SNTP IEEE588v OC/BC (Software) IEEE588v2 TC (Hardware) - ns accuracy IEEE588v2 OC/BC (Software) Routing: IPv Unicast static routing, RIP v/v2, OSPFv2, Multicast: IGMPv/v2/v, DVMRP, PIM-DM, PIM-SM, PIM-SSM Routing Redundancy: VRRP (Virtual Router Redundancy Protocol) Profinet v2. CC-B certified, Ethernet/IP, Modbus/TCP status registers MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group,2,,9, RFC RFC 57, RFC 2, RFC 25, RFC 9, RFC 6, RFC 757, RFC 20, RFC 202, RFC 20, RFC 22, RFC 257, RFC 272, RFC 289, RFC 286, RFC, RFC 2, RFC, RFC, RFC 5, RFC 267 Power Input Voltage Switch Core: DC version: redundant 8~57 VDC AC version: single 0~220 VAC Redundant AC version: dual 0~220 VAC Mixed AC/DC -Redundant: x0~220vac & 8~57VDC : 2 x 8-57 VDC (each power input max 60W) Input Current (Max) Connectors Physical Characteristics Housing Dimension (W x H x D) Weight Installation CPU board AC/ redundant AC: VAC, 0.58 A Max, 6W Max CPU board redundand DC 8-57 VDC, 0.68A Max, 2.7W Max 802.af full loading: 5-57 VDC, 8.A Max, 70W Max 802.at + full loading: 5-57 VDC,.A Max, 720W Max 2 x Lockable 5-pin terminal blocks for power input (all vers.) 2 x Lockable -pin terminal blocks for DC power input (DC vers.) -2 x AC power inlet (non-redundant(x) / -MR version(x) / -R(x2) ) x Lockable -pin terminal blocks for DC power input (-MR version) IP0 SPCC metal housing 0 x x 0 mm (not including screws and rack-mount kit) 5Kg (not including module but module cover only) U Rack-mount, Rack-mount kit included TEL : FAX:

6 Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity -0 C~75 C (-0 F~67 F) -0 C~85 C (-0 F~85 F) 5%~95%, 55 C (Non-condensing) Switching Modules Technical Specifications Description 8-Port RJ5 module 8-Port RJ5 module 8-Port SFP module Model Name RHG7X28- RHG7X28-M2 RHG7X28-M Properties Power per port 5./0W (802.af/at) - - Total Max Power 20 W - - Number of ports Port speed 0/00/000 BASE-T(X) 0/00/000 BASE-T(X) 00/000 BASE-F(X) Interface RJ5 RJ5 SFP slot Dimensions 0.5 x 7.6 x 9.5mm 0.5 x 7.6 x 9.5mm 0.5 x 7.6 x 9.5mm Weight 550 g 500 g 50 g Fixing 2 x screws (included) 2 x screws (included) 2 x screws (included) Secure Modules Technical Specifications Description -Port RJ5 MACsec Secure module -Port SFP MACsec Secure module Model Name RHG7X28-M RHG7X28-M Properties Power per port - - Total Max Power - - Number of ports Port speed 0/00/000 BASE-T(X) 00/000 BASE-F(X) Interface RJ5 SFP Dimensions 0.5 x 7.6 x 9.5mm 0.5 x 7.6 x 9.5mm Weight 500g 500g Fixing 2 x screws (included) 2 x screws (included) TEL : FAX:

7 ORDERING INFORMATION Main core switch ordering information Model Name Part Number Slots Uplink ports Power supply RHG7628-CPU-GSFP PRHG7628CPUG x Gb SFP Single 0~220 VAC + Dual 8~57 VDC RHG7628-CPU-GSFP-R PRHG7628CPU2G x Gb SFP Dual 0~220 VAC + Dual 8~57 VDC for RHG7628-CPU-0GSFP-MR PRHG7628CPU7G x Gb SFP Single 0~220 VAC + Single 8~57 VDC (CPU) and Dual 8~57 VDC for RHG7628-CPU-GSPF-DC PRHG7628CPUG x Gb SFP Dual 2~8 VDC +Dual 8~57 VDC for RHG7628-CPU-0GSFP PRHG7628CPUG x 0 Gb SFP Single 0~220 VAC + Dual 8~57 VDC RHG7628-CPU-0GSFP-R PRHG7628CPU5G x 0 Gb SFP Dual 0~220 VAC + Dual 8~57 VDC for RHG7628-CPU-0GSFP-MR PRHG7628CPU8G x 0 Gb SFP Single 0~220 VAC + Single 8~57 VDC (CPU) and Dual 8~57 VDC for RHG7628-CPU-0GSFP-DC PRHG7628CPU6G x 0 Gb SFP Dual 2~8 VDC +Dual 8~57 VDC for Modules ordering information Model name Part Number RJ5 ports RJ5 non- ports SFP ports RJ5 MACsec SFP MACsec RHG7X28- PRHG7X280G RHG7X28-M2 PRHG7X28M20G RHG7X28-M PRHG7X28M0G RHG7X28-M PRHG7X28M0G RHG7X28-M5 PRHG7X28M50G Optional Accessories Model name Part Number Description AC power cable (US) 50800G AC power cable (US plug) AC power cable (EU) G AC power cable (EU plug) SDR G DIN RAIL POWER SUPPLY / T;AC 88~26V to 2VDC.2A;75W SDR G DIN RAIL POWER SUPPLY / T;AC 00~20V to 8V~55V DC 5A;20W SDR G DIN RAIL POWER SUPPLY / T;AC 00~20V to 8V~55V DC 0A;80W LM8-AS-TI-N G SFP Transceiver, 55Mbps, 0nmFP, Multi-mode, 2km,.V, -0~85 C LS8-AS-TI-N 50709G SFP Transceiver, 55Mbps, 0nmFP, Single-mode, 0km,.V, -0~85 C LM28-CS-TI-N G SFP Transceiver, 250Mbps, 850nmVCSEL, Multi-mode, 550m,.V, -20~85 C LM8-CS-TI-N 50709G SFP Transceiver, 250Mbps, 0nmFP, Multi-mode, 2km,.V, -0~85 C LS8-CS-TI-N G SFP Transceiver, 250Mbps, 0nmFP, Single-mode, 0km,.V, -0~85 C LS8-CL-TI-N 50709G SFP Transceiver, 250Mbps, 0nmDFB, Single-mode, 0km,.V, -0~85 C LM28-HS-TI-N G SFP Transceiver, 0.Gbps, 850nmFP, Multi-mode, 0km,.V, -0~85 C LS8-HS-TI-N G SFP Transceiver, 0.Gbps, 0nmFP, Single-mode, 0km,.V, -0~85 C LS8-HL-TI-N G SFP Transceiver, 0.Gbps, 550nmFP, Single-mode, 0km,.V, -0~85 C LS8-HU-TI G SFP Transceiver, 0.Gbps, 550nmFP, Single-mode, 80km,.V, -0~85 C TEL : FAX:

8 REGULATORY APPROVALS Regulatory Approvals Safety UL nd Ed. /CSA C22.2 No nd Ed. / EN / CB EMC IEC FCC Part 5, Subpart B, Class A EN 5502, EN 5502, EN , EN , EN , EN Test Item Value Level ESD Contact Discharge Air Discharge ±8KV ±5KV IEC RS Enclosure Port 0(V/m), MHz * IEC IEC EFT Surge AC Power Port DC Power Port Signal Port AC Power Port AC Power Port DC Power Port DC Power Port Signal Port ±2.0KV ±2.0KV ±2.0KV Line-to Line±.0KV Line-to Earth±2.0KV Line-to Line±.0KV Line-to Earth±2.0KV Line-to Earth±2.0KV IEC CS MHz 0V rms * IEC PFMF (Enclosure) AC 50Hz 0A/m IEC DIP AC Power Port - - Shock Drop Vibration RoHS2 MTBF Warranty MIL-STD-80G Method 56.5 MIL-STD-80F Method 56.5 MIL-STD-80F Method 5.5 C- & C-2 Yes TBD 5 years * EMC level on CS/RS pass conditional to the use of Shielded Ethernet Cable TEL : FAX: