Configure System Parameters
|
|
|
- Hannah Harrell
- 6 years ago
- Views:
Transcription
1 This section includes the following:, page 1 Cisco Prime Collaboration allows you to configure system parameters for Cisco Prime Collaboration Assurance. The following are the system configuration parameters for Cisco Prime Collaboration Assurance. If you have deployed Cisco Prime Collaboration in MSP mode, the cluster (data) is displayed for a selected customer (selected from the global selection drop-down list). SMTP Server To configure this parameter under Assurance Administration > Setup for Alarms & Events, see Configure SMTP Server. SMTP Server To configure this parameter under Alarm & Report Administration > Setup for Alarms & Events, see Configure SMTP Server. Call Quality Data Source Management Cisco Prime Collaboration monitors voice-quality measurements in a VoIP network. This real-time, service-quality information is collected from Unified CM and Cisco NAM or Prime vnam. To configure this parameter under Assurance Administration > CDR Source Settings > Manage Call Quality Data Sources, see Update Data Source Credentials. Call Quality Data Source Management Cisco Prime Collaboration monitors voice-quality measurements in a VoIP network. This real-time, service-quality information is collected from Unified CM and Cisco NAM or Prime vnam. To configure this parameter under Alarm & Report Administration > CDR Source Settings > Manage Call Quality Data Sources, see Update Data Source Credentials. LDAP Settings To configure this parameter under System Administration > LDAP Settings, see Configure an LDAP Server. Log Management To configure this parameter under System Administration > Log Management, see Log Levels. 1
2 Global System Parameters SFTP Settings To monitor calls from Unified CM, you must configure SFTP. To configure this parameter under Assurance Administration > CDR Source Settings > CUCM SFTP Credentials, see Configure SFTP Settings. SFTP Settings To monitor calls from Unified CM, you must configure SFTP. To configure this parameter under Alarm & Report Administration > CDR Source Settings > CUCM SFTP Credentials, see Configure SFTP Settings. IP Phone Inventory Collection Settings To configure this parameter under Device Inventory > Inventory Schedule > IP Phone Inventory Schedule, see Update and Collect Inventory Details. IP Phone Inventory Collection Settings To configure this parameter under Inventory > Inventory Schedule > IP Phone Inventory Schedule, see Update and Collect Inventory Details. IP Phone XML Inventory Collection Settings You can use the Phone XML Collection to schedule the phone discovery. To configure this parameter under Device Inventory > Inventory Schedule > IP Phone Inventory Schedule, see Update and Collect Inventory Details. IP Phone XML Inventory Collection Settings You can use the Phone XML Collection to schedule the phone discovery. To configure this parameter under Inventory > Inventory Schedule > IP Phone Inventory Schedule, see Update and Collect Inventory Details. Cluster Data Discovery Settings Allows Cisco Prime Collaboration to consolidate the inventory and the device registration information it collects from Unified CM. To configure this parameter under Device Inventory > Inventory Schedule > Cluster Data Discovery Schedule, see Cluster Data Discovery Settings. Cluster Data Discovery Settings Allows Cisco Prime Collaboration to consolidate the inventory and the device registration information it collects from Unified CM. To configure this parameter under Inventory > Inventory Schedule > Cluster Data Discovery Schedule, see Cluster Data Discovery Settings. Global System Parameters The changes performed on these pages are applicable to all customers (MSP mode) or domains (Enterprise mode). Table 1: System Parameters Configure Single Sign-On. Add a license file. Administration > Single Sign-On Administration > License Management 2
3 Global System Parameters Configure: SSL Certificate Authentication for Device Discovery Dashlet Label Prefix SMTP server > General Settings Configure LDAP server to access user details. Change the log levels, by default it is Error. Configure SFTP parameters to monitor calls from Unified CM. Configure parameters to collect information about the phones and clusters that are managed in Cisco Prime Collaboration Assurance inventory database. Configure parameters to collect information from IP phone XML. > LDAP Settings > Log Management > SFTP Settings > IP Phone Inventory Collection Settings > IP Phone XML Inventory Collection Settings Configure parameters to consolidate the inventory and the device registration information from Unified CM. > Cluster Data Discovery Settings Poll parameters for Cisco TelePresence monitoring settings Add a dial plan. Create a call category. Configure parameters to poll devices. Customize the syslog rules to monitor faults. Customize the correlation rules to monitor faults. Configure alarm notification ( , syslog, or trap) Administration > Alarm & Event Setup > TelePresence Settings Administration > System Setup > Call Classification > Dial Plan Configuration Administration > System Setup > Call Classification > Call Category Administration > Alarm & Event Setup > Polling Settings Administration > Alarm & Event Setup > Event Customization > Syslog Rules Administration > Alarm & Event Setup > Event Customization > Correlation Rules Administration > Alarm & Event Setup > Notification > Assurance Notification Criteria 3
4 Global System Parameters Configure threshold parameters for network devices and Medianet Configuration. Configure Voice Call Grade Settings (Good, Acceptable, Poor) Configure report export parameters, such as file format, export file location, and notification . Configure endpoint report export parameters, such as number of endpoints, schedule, file format, export file location, and notification . Configure audio phones report export parameters, such as audio phone reports (IP phone audit, move, suspect IP phones), file format, export file location, and notification . Administration > Alarm & Event Setup > Session PathThreshold Settings > TelePresence Device Administration > Call Report > Voice Call Grade Settings Interactive Reports > Voice Call Quality Event History Reports > Export Interactive Reports > Voice Call Quality Reports > Export Most Impacted Endpoints Interactive Reports > UCM/CME Phone Activity Reports > Export Audio Phones Configure video phones report export parameters, such as video phone reports (video phone audit, move, remove video phones), file format, export file location, and notification . Interactive Reports > UCM/CME Phone Activity Reports > Export Video Phones Schedule regular backups. Administration > Backups Table 2: System Parameters Configure Single Sign-On. Add a license file. Configuring SMTP server Configure SSL Certificate Authentication for Device Discovery. Configure LDAP server to access user details. Change the log levels, the default value is Error. Configure SFTP parameters to monitor calls from Unified CM. System Administration > Single Sign-On System Administration > License Management Alarm & Report Administration> Setup for Alarms & Events System Administration > Certificate Management System Administration > LDAP Settings System Administration > Log Management Alarm & Report Administration > CDR Source Settings > CUCM SFTP Credentials 4
5 Configure SMTP Server Configure parameters to collect information about the phones and clusters that are managed in Cisco Prime Collaboration Assurance inventory database. Configure parameters to collect information from IP phone XML. Inventory > Inventory Schedule > IP Phone Inventory Schedule Inventory > Inventory Schedule > IP Phone XML Inventory Schedule Configure parameters to consolidate the inventory and the device registration information from Unified CM. Inventory > Inventory Schedule > Cluster Data Discovery Schedule Add a dial plan. Create a call category. Configure parameters to poll devices. Customize the syslog rules to monitor faults. Configure alarm notification ( , syslog, or trap) Configure Voice Call Grade Settings (Good, Acceptable, Poor) Configure audio phones report export parameters, such as audio phone reports (IP phone audit, move, suspect IP phones), file format, export file location, and notification . Alarm & Report Administration > CDR Analysis Settings > Dial Plan Configuration Alarm & Report Administration > CDR Analysis Settings > Call Category Configuration Alarm & Report Administration > Polling Settings Alarm & Report Administration > Event Customization > Syslog Rules Alarm & Report Administration> Notification Setup > Custom Notification Alarm & Report Administration > CDR Analysis Settings > Configure Voice Call Grade Reports > UCM/CME Phone Activity Reports > Export Audio Phones Configure video phones report export parameters, such as video phone reports (video phone audit, move, remove video phones), file format, export file location, and notification . Reports > UCM/CME Phone Activity Reports > Export Audio Phones Schedule regular backups. System Administration > Backup Settings Configure SMTP Server You can configure the SMTP server to send and receive notifications for alarms by specifying the SMTP server name and the sender AAA address on the Setup for Alarms & Events page ( Setup for Alarms & Events). The value in the Sender AAA Address field helps you to identify the server you receive the from, in case of many servers. 5
6 Configure Cisco Prime Collaboration Assurance Server Time Zone Configure Cisco Prime Collaboration Assurance Server Time Zone To configure the Cisco Prime Collaboration Assurance server time zone: Step 1 Step 2 Log in to the Cisco Prime Collaboration Assurance server with the account that you have created during installation. By default, it is admin. Enter the following command to see the list of supported time zones: Step 3 cm/admin# show timezones Enter the following commands to set the time zone for the Cisco Prime Collaboration Assurance server: Step 4 cm/admin(config)# config t cm/admin(config)# clock timezone US/Pacific cm/admin(config)# exit Enter the following command to copy running-configuration to startup-configuration: Step 5 cm/admin# write memory Enter the following command to restart the Cisco Prime Collaboration Assurance server: Step 6 cm/admin# application stop cpcm cm/admin# show application status cpcm cm/admin# application start cpcm Wait for 10 minutes for the server to finish the restart process and enter the following command to check if the time zone is set to the new value: cm/admin# show timezone US/Pacific Note We recommended you to keep the time zone values configured in postgres database same as that of system time zone to avoid the data mismatch issues. If you change system time zone manually, then change the log_timezone and timezone parameters in postgres.conf file in /opt/postgres/9.2/data (Analytics database) and /opt/postgres/9.2/cpcmdata (Assurance database, including both cpcm and qovr database) to match system time zone, and then restart the system. Root access feature is mandatory to change time zone value in postgres database, hence you should raise a TAC case to obtain root access. 6
Cisco Prime Collaboration Assurance Guide - Standard, 10.6
First Published: December 19, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883
Cisco Prime Collaboration Assurance Guide - Standard, 10.5
Last Modified: May 09, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text
Overview of Cisco Prime Collaboration Assurance and Analytics Business
Overview of Cisco Prime Collaboration Assurance and Analytics Business Cisco Prime Collaboration Assurance and Analytics Business is a monitoring and data analytics management application system that allows
Overview of Cisco Prime Collaboration Assurance
Overview of Cisco Prime Collaboration Assurance Cisco Prime Collaboration is a comprehensive video and voice service assurance and management system with a set of monitoring, troubleshooting, and reporting
Required Ports for Cisco Prime Collaboration
The following tables lists the required ports for the Cisco Prime Collaboration Assurance and Cisco Prime Collaboration Provisioning servers to communicate with the devices. Ports Used by Prime Collaboration
Monitor Video Endpoints
This section explains the following:, page 1 The Endpoint Diagnostics dashboard displays the details of all video For Cisco Prime Collaboration Release 11.6 and later You can add any of the endpoints to
Setting Up the Network for Monitoring
2 CHAPTER Before Prime Collaboration can start monitoring the voice and video endpoints in your network, you must complete several tasks. Table 2-1 provides information about the prerequisites for monitoring
Setting Up the Server
Managing Licenses, page 1 Cross-launch from Prime Collaboration Provisioning, page 5 Integrating Prime Collaboration Servers, page 6 Single Sign-On for Prime Collaboration, page 7 Changing the SSL Port,
Simplifying Collaboration Deployments with Prime Collaboration
Simplifying Collaboration Deployments with Prime Collaboration Jose Gregorio Linero Welcker, Technical Solutions Architect Latam MCO CCIE Collaboration # 24857 Cisco Spark How Questions? Use Cisco Spark
Set Threshold Rules. Threshold Rules. This section explains how to customize alarms and events to suit your business needs.
This section explains how to customize alarms and events to suit your business needs. Threshold Rules, page 1 Configure TelePresence Endpoint Thresholds Global, page 3 Overview of Device Pool Thresholds,
This section explains how to customize alarms and events to suit your business needs.
This section explains the following:, page 1 Threshold Rules, page 1 Configure TelePresence Endpoint Threshold Device Level, page 3 Configure TelePresence Endpoint Thresholds Global, page 4 Configure Thresholds
Services. Service descriptions. Cisco HCS services
Service descriptions, page 1 Infrastructure Platform Automation Description, page 5 Infrastructure Manager Sync Introduction, page 5 Service descriptions After the installation of the Cisco HCM-F platform,
Perform Backup and Restore
This section explains the following:, page 1 You can schedule periodic backups using the Cisco Prime Collaboration Assurance user interface. Cisco Prime Collaboration Analytics data is backed up on a remote
Readme for Cisco Prime Collaboration Assurance/Analytics 10.0 Patch 2 (Service Pack 1)
Readme for Cisco Prime Collaboration Assurance/Analytics 10.0 Patch 2 Revised: February 13th, 2014 This readme provides procedure to install Cisco Prime Collaboration Assurance/Analytics 10.0 Patch 2 Contents
Cisco Prime Collaboration Deployment Configuration and Administration
Cisco Prime Collaboration Deployment Configuration and Administration Services, page 1 Limitations and Restrictions, page 5 Services After the installation of the Cisco Prime Collaboration Deployment platform,
Analytics Dashboards and Reports
Prime Collaboration, page 1 User Interface, page 2 Configure sftp Server, page 5 Prerequisites for Data Population in the Prime Collaboration Analytics Dashlets, page 6 Asset Usage, page 6 Traffic Analysis,
Configure Notification
s, page 1 Notification Groups, page 2 Notification Criteria, page 3 Types of Notifications, page 3 Configure SMTP Server, page 4 Notifications Limited to Specific Alarms, page 5 s Cisco Prime Collaboration
Perform Backup and Restore
, page 1 You can schedule periodic backups using the Cisco Prime Collaboration Assurance user interface, or run backup commands manually by logging in to the system as an admin user (CLI user). However,
Migrate Cisco Prime Collaboration Assurance
This section explains the following: Overview of Data Migration Assistant, page 1 Preinstallation Guidelines, page 2 Pre-requisites for Backup and Restore, page 3 DMA Backup and Restore Period - Approximate
Set Threshold Rules. Threshold Rules. This section explains how to customize alarms and events to suit your business needs.
This section explains how to customize alarms and events to suit your business needs. Threshold Rules, page 1 Overview of Voice Call Grade Settings, page 3 Add Dynamic Syslogs, page 3 Create Custom Events,
Configuring Service Monitor
CHAPTER 3 The following topics are included: Configuring Trap Receivers, page 3-2 Understanding and Setting Data Source Credentials, page 3-2 Managing the Phone Count, page 3-15 Configuring Settings for
Prime Collaboration Analytics Dashboards and Reports
Prime Collaboration Analytics Dashboards and Reports Prime Collaboration Analytics dashboards have time-period dependency. A report cannot be generated until enough time has passed to process data for
Cisco Prime Collaboration 10.5 Assurance/Analytics
Deployment Guide Cisco Prime Collaboration 10.5 Assurance/Analytics Deployment Guide July 2014 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of
CLI users are not listed on the Cisco Prime Collaboration User Management page.
Cisco Prime Collaboration supports creation of user roles. A user can be assigned the Super Administrator role. A Super Administrator can perform tasks that both system administrator and network administrator
Perform Backup and Restore
, page 1 You can schedule periodic backups using the Cisco Prime Collaboration user interface, or run backup commands manually by logging in to the system as an admin user (CLI user). However, you must
Cisco Prime Collaboration 10.5 Assurance Addendum for User Guides (Includes Features)
Cisco Prime Collaboration 10.5 Assurance Addendum for User Guides (Includes 10.5.1 Features) Cisco Prime Collaboration 10.5 Assurance Addendum for User Guides (Includes 10.5.1 Features) 2 Setting Up the
AuditConfigurationArchiveandSoftwareManagementChanges (Network Audit)
This section contains the following topics: Audit Configuration Archive and Software Management Changes (Network Audit), on page 1 Audit Changes Made By Users (Change Audit), on page 1 Audit Actions Executed
Analytics Dashboards and Reports
Prime Collaboration, page 1 User Interface, page 2 Configure sftp Server, page 5 Prerequisites for Data Population in the Prime Collaboration Analytics Dashlets, page 5 Asset Usage, page 6 Traffic Analysis,
Managing Inventory CHAPTER. Viewing Inventory Details
CHAPTER 14 Viewing Inventory Details Cisco Prime Collaboration Manager maintains continuous, real-time discovery of device inventory. The Prime CM inventory automatically reflects every addition, deletion,
This section explains how to customize alarms and events to suit your business needs.
This section explains how to customize alarms and events to suit your business needs. Configuring Thresholds, page 1 Configure TelePresence Endpoint Thresholds Global, page 3 Overview of Device Pool Thresholds,
Q&As. Implementing Cisco Collaboration Devices v1.0. Pass Cisco Exam with 100% Guarantee
210-060 Q&As Implementing Cisco Collaboration Devices v1.0 Pass Cisco 210-060 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: 100% Passing Guarantee 100% Money Back
Prime Collaboration Dashboards
, page 1 The Prime Collaboration dashboards provide consolidated information for devices, applications, and endpoints. With these dashboards, you can: Monitor all endpoints for a user using a single interface.
Cisco Prime Unified Service Monitor 8.7
Q&A Cisco Prime Unified Service Monitor 8.7 Q. What is Cisco Prime Unified Service Monitor (USM)? A. Cisco Prime Unified Service Monitor is part of the Cisco Prime Unified Communications Management Suite
Diagnostics for Video Endpoints
For Cisco Prime Collaboration Release 11.1 and earlier During the troubleshooting workflow, the devices are polled, based on the values defined for the System Status Polling Interval, Interface Statistics
9.2(1)SU1 OL
Prerequisites, page 1 workflow, page 2 architecture considerations, page 2 Deployment model considerations, page 3 for Large PoD and Small PoD, page 4 for Micro Node, page 8 Prerequisites Before you plan
Analyzing Call Signaling
Analyzing Call Signaling The Call Signaling Analyzer enables you to determine the reason of call failure. Call Signaling Analyzer analyzes calls at a high level and then drills down to a lower level within
Media Path Analysis. Analyzing Media Paths Using IP SLA. Before You Begin. This section contains the following:
This section contains the following: Analyzing Media Paths Using IP SLA, page 1 Analyzing Media Paths Using VSAA, page 3 Managing a Video Test Call, page 6 Analyzing Media Paths Using IP SLA To start a
Managing Configurations
CHAPTER 3 The Configurations page is your starting point for managing device configurations for network elements managed by Cisco Prime Network by using the CM tools. The following table lists the main
Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Cisco 300-075 Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) https://killexams.com/pass4sure/exam-detail/300-075 QUESTION: 90 An engineer is configuring a new DX-80 in Cisco Unified Communications
Prime Central Integration
CHAPTER 4 Cisco Prime Central is the presentation tier for the Cisco Prime Carrier Management suite, which includes Cisco Prime Performance Manager, Cisco Prime Network, Cisco Prime Optical, and other
Implementing Jabber with VCS-Expressway and MRA
6210 Central Ave, Portage, IN. 46368 Phone: 219.764.3800 Fax: 219.764.3805 Web: http://www.ctclc.com Implementing Jabber with VCS-Expressway and MRA This is a three day instructor-led course that focuses
examcollection.premium.exam.161q
300-075.examcollection.premium.exam.161q Number: 300-075 Passing Score: 800 Time Limit: 120 min File Version: 6.0 300-075 Implementing Cisco IP Telephony & Video, Part 2 v1.0 Version 6.0 Exam A QUESTION
Data Collection and Background Tasks
This section contains the following topics: Control Data Collection Jobs, on page 1 How Data Retention Settings Affect Web GUI Data, on page 1 About Historical Data Retention, on page 2 Performance and
Cisco Prime Collaboration 11.X
Data Sheet Cisco Prime Collaboration 11.X Deliver superior end-user quality of experience and lower operating expenses with simplified, unified management across voice and video collaboration networks.
Configure Notifications
, page 1 Notification Groups, page 2 Notification Criteria, page 3 Types of Notifications, page 3 SNMP Trap Notifications, page 5 Syslog Notifications, page 12 Notifications Limited to Specific Alarms,
Configure Mobile and Remote Access
Mobile and Remote Access Overview, on page 1 Mobile and Remote Access Prerequisites, on page 3 Mobile and Remote Access Configuration Task Flow, on page 4 Mobile and Remote Access Overview Cisco Unified
PracticeTorrent. Latest study torrent with verified answers will facilitate your actual test
PracticeTorrent http://www.practicetorrent.com Latest study torrent with verified answers will facilitate your actual test Exam : 300-070 Title : Implementing Cisco IP Telephony & Video, Part 1 v1.0 Vendor
Use Direct IP Address Calls Between Two Endpoints to Troubleshoot Call Quality Issues
Use Direct IP Address Calls Between Two Endpoints to Troubleshoot Call Quality Issues Document ID: 119014 Contributed by Nil Laskar, Cisco TAC Engineer. Jun 19, 2015 Contents Introduction Background Information
Exam Questions
Exam Questions 210-065 CIVND Implementing Cisco Video Network Devices v1.0 https://www.2passeasy.com/dumps/210-065/ 1. Which four features are provided by Cisco TelePresence Management Suite? (Choose four.)
CAPPS: Implementing Cisco Collaboration Applications v1
Course Objectives Implement Cisco Unity Connection in a Cisco Unified Communications Manager deployment Describe how to implement Cisco Unity Express in a Cisco Unified Communications Manager Express deployment
Cisco Prime Infrastructure 3.4 Administrator Guide
First Published: 2017-12-18 Last Modified: 2018-04-04 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
"Charting the Course... Implementing Cisco Telepresence Video Solutions Part 2 (VTVS2) Course Summary
Description Course Summary Implementing Cisco TelePresence Video Solutions, Part 2 (VTVS2) v1.0 is a 5-day instructor-led course that is designed to teach technicians who install and support Cisco TelePresence
Contact Center Assurance Dashboards
The Prime Collaboration Contact Center Assurance performance dashboards help you to monitor your network by providing near real-time information about the Contact Center components such as CUIC, Finesse,
Next Generation Enterprise WAN Regional WAN Management
Supplemental Guide Next Generation Enterprise WAN Regional WAN Management Supplemental Guide June, 2012 For further information, questions and comments please contact ccbu-pricing@cisco.com 2012 Cisco
Obtain the hostname or IP address of Cisco UCS Central. Obtain the shared secret that was configured when Cisco UCS Central was deployed.
Registering Cisco UCS Domains with Cisco UCS Central Registration of Cisco UCS Domains, on page 1 Policy Resolution between Cisco UCS Manager and Cisco UCS Central, on page 1 Registering a Cisco UCS Domain
Cisco TelePresence Conductor with Cisco Unified Communications Manager
Cisco TelePresence Conductor with Cisco Unified Communications Manager Deployment Guide TelePresence Conductor XC4.0 Unified CM 10.5(2) January 2016 Contents Introduction 6 About this document 6 Related
With standard audit logging, configuration changes to the system get logged in separate log files for auditing.
, on page 1 With audit logging, configuration changes to the system get logged in separate log files for auditing. Audit Logging (Standard) When audit logging is enabled, but the detailed audit logging
Cisco TelePresence Conductor with Cisco Unified Communications Manager
Cisco TelePresence Conductor with Cisco Unified Communications Manager Deployment Guide XC2.2 Unified CM 8.6.2 and 9.x D14998.09 Revised March 2014 Contents Introduction 4 About this document 4 Further
Understanding Feature and Network Services in Cisco Unified Serviceability
CHAPTER 10 Understanding Feature and Network Services in Cisco Unified Serviceability May 19, 2009 Cisco Unified Serviceability service management includes working with feature and network services and
Understanding LMS Tasks
CHAPTER 18 This section briefly describes all the LMS tasks. See the Online help for further details. This section explains the following LMS task groups: Understanding Admin Tasks Understanding Report
Cisco TelePresence Conductor with Cisco VCS (Policy Service)
Cisco TelePresence Conductor with Cisco VCS (Policy Service) Deployment Guide TelePresence Conductor XC3.0 Cisco VCS X8.x Revised January 2015 Contents Introduction 5 About the Cisco TelePresence Conductor
Exam Questions
Exam Questions 500-006 Implementing Cisco TelePresence Video Solution - Part 2 https://www.2passeasy.com/dumps/500-006/ Question No : 1 Which Cisco TelePresence C Series Codec command will move the on-screen
Discover Devices. Discover Devices. Discovery Life Cycle
, page 1 Discovery Methods, page 4 Automatic Discovery of Devices, page 13 Manual Discovery of Devices, page 17 Import Devices, page 18 Export Device Lists and Credentials, page 19 Unified CM Cluster Data
Configuring Cisco TelePresence Manager
CHAPTER 3 Revised: February 25, 2009, First Published: November 27, 2006 Contents Introduction, page 3-3 Security Settings, page 3-3 Generating Security Certificate Reports, page 3-4 Viewing Security Certificates,
Cisco TelePresence Conductor with Unified CM
Cisco TelePresence Conductor with Unified CM Deployment Guide TelePresence Conductor XC3.0 Unified CM 10.x Revised February 2015 Contents Introduction 5 About this document 5 Related documentation 5 About
Configure Prime Collaboration Assurance (PCA) - Conference Diagnostics
Configure Prime Collaboration Assurance (PCA) - Conference Diagnostics Contents Introduction Prerequisites Requirements Components Used Background Information Limitation of Endpoints Set to Limited or
Cisco Prime Collaboration 12
Data Sheet Cisco Prime Collaboration 12 Deliver superior end-user quality of experience and lower operating expenses with simplified, unified management across voice and video collaboration networks Enterprise
Contact Center Assurance Dashboards
The Cisco Prime Collaboration Contact Center Assurance performance dashboards help you to monitor your network by providing near real-time information about the Contact Center components such as Cisco
CTCOLLAB: Troubleshooting Cisco IP Telephony and Video
Course Objectives Describe a systematic methodology to troubleshoot issues in Cisco collaboration deployments Troubleshoot issues that relate to Cisco Unified Communications Manager Troubleshot issues
INTEGRATING CISCO UNIFIED COMMUNICATIONS APPLICATIONS
INTEGRATING CISCO UNIFIED COMMUNICATIONS APPLICATIONS V1.0 (CAPPS) COURSE OVERVIEW: Integrating Cisco Unified Communications Applications (CAPPS) v1.0 prepares the learner for integrating Cisco Unity Connection,
DMP 128 Plus C V DMP 128 Plus C V AT. Cisco CUCM Configuration Guide REVISION: DATE: MARCH 7 TH, 2018
DMP 128 Plus C V DMP 128 Plus C V AT Cisco CUCM Configuration Guide REVISION: 1.2.1 DATE: MARCH 7 TH, 2018 Revision Log Date Version Notes Aug. 4 th 2017 1.0 First Release: Applies to Firmware Version
Supporting Cisco TelePresence Manager
CHAPTER 2 Revised: February 25, 2009, Contents Introduction Dashboard Scheduled Meetings MCU Devices Cisco Unified Communications Manager Introduction System support tasks consist primarily of monitoring
Using the Portal in Operations Manager
CHAPTER 2 These topics describe how to use the portal in Cisco Unified Operations Manager: Understanding the Diagnostics View, page 2-1 Customizing Your Dashboard, page 2-1 Working with Dashboard Views,
Using the Prime Performance Manager Web Interface
3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager
NATO Communications and Information Systems School
1.Course Title Version dated 12/Dec/2016 NATO Call Manager Course and Voice Over Secure IP (VOSIP) Version 02 2.Identification Number (ID) 097 3. Purpose of the Course This course prepares the students
Secure Call Recording
Secure Call Recording Effective Summer 2017, Imagicle Call Recording can record Encrypted calls, i.e. calls which are placed with Secure SIP (SIP/TLS) for the signalling and SRTP for the audio stream.
vrealize Operations Manager Customization and Administration Guide vrealize Operations Manager 6.4
vrealize Operations Manager Customization and Administration Guide vrealize Operations Manager 6.4 vrealize Operations Manager Customization and Administration Guide You can find the most up-to-date technical
DMP 128 Plus C V DMP 128 Plus C V AT. Cisco CUCM Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017
DMP 128 Plus C V DMP 128 Plus C V AT Cisco CUCM Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017 Revision Log Date Version Notes August 4 th 2017 1.0 First Release: Applies to Firmware Version
Unity Connection Version 10.5 SAML SSO Configuration Example
Unity Connection Version 10.5 SAML SSO Configuration Example Document ID: 118772 Contributed by A.M.Mahesh Babu, Cisco TAC Engineer. Jan 21, 2015 Contents Introduction Prerequisites Requirements Network
Administrative Tasks CHAPTER
15 CHAPTER This chapter describes administrative tasks to perform with WCS. These tasks include the following: Running Background Tasks, page 15-2 (such as database cleanup, location server synchronization,
Overview of the Cisco NCS Command-Line Interface
CHAPTER 1 Overview of the Cisco NCS -Line Interface This chapter provides an overview of how to access the Cisco Prime Network Control System (NCS) command-line interface (CLI), the different command modes,
Cisco Exam Implementing Cisco IP Telephony & Video, Part 1 v1.0 Version: 10.0 [ Total Questions: 189 ]
![Cisco Exam Implementing Cisco IP Telephony & Video, Part 1 v1.0 Version: 10.0 [ Total Questions: 189 ]](/thumbs/87/96784189.jpg "Cisco Exam Implementing Cisco IP Telephony & Video, Part 1 v1.0 Version: 10.0 [ Total Questions: 189 ]")
s@lm@n Cisco Exam 300-070 Implementing Cisco IP Telephony & Video, Part 1 v1.0 Version: 10.0 [ Total Questions: 189 ] Cisco 300-070 : Practice Test Question No : 1 Which two codecs are the best codecs
Cisco Prime Infrastructure 3.3 Administrator Guide
First Published: 2017-08-03 Last Modified: 2018-01-31 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1
CHAPTER 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Cisco Prime Health and Utilization Monitor (HUM) is a Simple Network Management Protocol (SNMP) based MIB polling application
Cisco Prime Collaboration Provisioning
Deployment Guide Cisco Prime Collaboration Provisioning Deployment Guide January 2013 For further information, questions and comments please contact ccbu-pricing@cisco.com 2013 Cisco and/or its affiliates.
TLS Setup. TLS Overview. TLS Prerequisites
Setup Overview, page 1 Prerequisites, page 1 Configuration Task Flow, page 2 Interactions and Restrictions, page 8 Overview Transport Layer Security () provides secure and reliable signaling and data transfer
Configuring Cisco TelePresence Manager
CHAPTER 3 Revised: March 31, 2008, First Published: November 27, 2006 Contents Introduction, page 3-28 Security Settings, page 3-29 Generating Security Certificate Reports, page 3-29 Viewing Security Certificates,
SAML-Based SSO Configuration
Prerequisites, page 1 SAML SSO Configuration Task Flow, page 5 Reconfigure OpenAM SSO to SAML SSO Following an Upgrade, page 9 SAML SSO Deployment Interactions and Restrictions, page 9 Prerequisites NTP
Use Plug and Play to Deploy New Devices
About Plug and Play, page 1 Prerequisites for Using Plug and Play, page 2 Plug and Play Workflow, page 2 Use the Plug and Play Dashboard to Monitor New Device Deployments, page 4 Create Plug and Play Profiles
Cisco Troubleshooting Cisco IP Telephony and Video (CTCOLLAB)
Cisco 300-080 Troubleshooting Cisco IP Telephony and Video (CTCOLLAB) http://killexams.com/pass4sure/exam-detail/300-080 Question: 213 Which two troubleshooting tools would initially be the best to use
Unified Communications Manager Version 10.5 SAML SSO Configuration Example
Unified Communications Manager Version 10.5 SAML SSO Configuration Example Contents Introduction Prerequisites Requirements Network Time Protocol (NTP) Setup Domain Name Server (DNS) Setup Components Used
Network Management. Network Management Phases and Tasks
CHAPTER 28 Network anagement Revised: September 28, 2012; Network management is a service consisting of a wide variety of tools, applications, and products to assist network system administrators in provisioning,
Maintaining Cisco Unity Connection Server
Migrating a Physical Server to a Virtual Machine, on page 1 Migrating from Cisco Unity 4.x and Later to Unity Connection 7.x and Later, on page 4 Replacing the Non-Functional Server, on page 5 Changing
QUICK INSTALLATION GUIDE Minder 4.2
QUICK INSTALLATION GUIDE Minder 4.2 1 Minder 4.2 Contents 1. Introducing MindArray Minder... 4 1.1 Gain Visibility into Server, Application, Virtualization and Network Infrastructure... 4 1.2. Why Minder?...
Running the Setup Web UI
The Cisco Prime IP Express setup interview in the web UI takes you through a series of consecutive pages to set up a basic configuration. For an introduction and details on the basic navigation for the
Q&As. Implementing Cisco Collaboration Application v1.0. Pass Cisco Exam with 100% Guarantee
300-085 Q&As Implementing Cisco Collaboration Application v1.0 Pass Cisco 300-085 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: https://www.pass4lead.com/300-085.html
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
Volume: 383 Questions Question No: 1 Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically? A. On the VCS, navigate to
With standard audit logging, configuration changes to the system get logged in separate log files for auditing.
, page 1 With audit logging, configuration changes to the system get logged in separate log files for auditing. Audit Logging (Standard) When audit logging is enabled, but the detailed audit logging option
Registering Cisco UCS Domains with Cisco UCS Central
Registering Cisco UCS Domains with Cisco UCS Central This chapter includes the following sections: Registration of Cisco UCS Domains, page 1 Policy Resolution between Cisco UCS Manager and Cisco UCS Central,
Setting up. Discovering the Network. Planning Discovery Runs CHAPTER
CHAPTER 3 After you install Prime NCS (WAN) and launch the browser, read the following sections to learn how to get started using Prime NCS (WAN): Discovering the Network, page 3-1 Setting Up Site Profiles,