Cisco Nexus 5000 Series Switches (Cisco Nexus 5010 and Nexus 5020 Switches)

Transcription

1 Cisco Nexus 5000 Series Switches (Cisco Nexus 5010 and Nexus 5020 Switches) Product Overview The Cisco Nexus 5000 Series Switches comprise a family of line-rate, low-latency, lossless 10 Gigabit Ethernet and Fibre Channel over Ethernet (FCoE) switches for data center applications (Figure 1). Figure 1. The Cisco Nexus 5000 Series Includes the Cisco Nexus 5010 Switch and Cisco Nexus 5020 Switch Supporting 10 Gigabit Ethernet and FCoE Today's data centers are increasingly filled with dense rack-mount and blade servers that host powerful multicore processors. The rapid increase of in-rack computing density, along with the increasing use of virtualization software, combine to push the demand for 10 Gigabit Ethernet and consolidated I/O: applications for which the Cisco Nexus 5000 Series is an excellent match. With low latency, front-to-back cooling, and rear-facing ports, the Cisco Nexus 5000 Series is designed for data centers transitioning to 10 Gigabit Ethernet as well as those ready to deploy a unified fabric that can handle their LAN, SAN, and server clusters, providing networking over a single link (or dual links for redundancy). The switch family, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as IEEE Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect FCoE to native Fibre Channel protects existing storage system investments while dramatically simplifying in-rack cabling. In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 Series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The switch family is compatible with integrated transceivers and Twinax cabling solutions that deliver cost-effective connectivity for 10 Gigabit Ethernet to servers at the rack level, eliminating the need for expensive optical transceivers. The Cisco Nexus 5000 Series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with network ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch family is highly serviceable, with redundant, hot-pluggable power supplies and fan modules. It uses data center-class Cisco NX-OS Software for high reliability and ease of management Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 24

2 Cisco Nexus Port Switch The Cisco Nexus 5020 is a two-rack-unit (2RU), 10 Gigabit Ethernet, FCoE, and Fibre Channel switch built to provide 1.04 terabits per second (Tbps) throughput with very low latency (Figure 2). It has 40 fixed 10 Gigabit Ethernet and FCoE Small Form-Factor Pluggable Plus (SFP+) ports. The first 16 fixed ports support both 10 Gigabit Ethernet and Gigabit Ethernet in hardware, providing a smooth migration path to 10 Gigabit Ethernet. Two expansion module slots can be configured to support up to 12 additional 10 Gigabit Ethernet and FCoE SFP+ ports, up to 16 Fibre Channel switch ports, or a combination of both. The switch has a serial console port and an out-of-band 10/100/1000-Mbps Ethernet management port. The switch is powered by 1+1 redundant, hot-pluggable power supplies and 4+1 redundant, hot-pluggable fan modules to provide highly reliable front-to-back cooling. Figure 2. The Cisco Nexus 5000 Series Includes the Cisco Nexus 5020, Supporting 40 Fixed Ports of 10 Gigabit Ethernet (Ports 1 to 16 Can Run Gigabit Ethernet) and FCoE and Two Expansion Module Slots Cisco Nexus Port Switch The Cisco Nexus 5010 is a 1RU, 10 Gigabit Ethernet, FCoE, and Fibre Channel switch providing more than 520- Gbps throughput with very low latency (Figure 3). It has 20 fixed 10 Gigabit Ethernet and FCoE SFP+ ports. The first 8 fixed ports are dual speed, supporting both 10 Gigabit Ethernet and Gigabit Ethernet in hardware and providing a smooth migration path to 10 Gigabit Ethernet. One expansion module slot can be configured to support up to 6 additional 10 Gigabit Ethernet and FCoE SFP+ ports, up to 8 4Gbps SFP Fibre Channel switch ports, up to 6 8Gbps SFP+ Fibre Channel switch ports or a combination of 4 additional 10 Gigabit Ethernet and FCoE SFP+ ports with 4 additional 4/2/1-Gbps Fibre Channel switch ports. The switch has a serial console port and an out-of-band 10/100/1000-Mbps Ethernet management port. The switch is powered by 1+1 redundant, hot-pluggable power supplies and 1+1 redundant, hot-pluggable fan modules to provide highly reliable front-to-back cooling Figure 3. The Cisco Nexus 5000 Series Includes the Cisco Nexus 5010, Supporting 20 Fixed Ports of 10 Gigabit Ethernet (Ports 1 to 8 Can Run Gigabit Ethernet) and FCoE and One Expansion Module Slot Expansion Module Options for the Cisco Nexus 5000 Series The Cisco Nexus 5000 Series is equipped to support expansion modules that can be used to increase the number of 10 Gigabit Ethernet and FCoE ports or connect to Fibre Channel SANs with 4/2/1-Gbps Fibre Channel switch ports, or both. The Cisco Nexus 5010 supports one expansion module, and the Cisco Nexus 5020 supports any combination of two modules from the following offerings (Figure 4): Ethernet module that provides six 10 Gigabit Ethernet and FCoE ports using the SFP+ interface Fibre Channel plus Ethernet module that provides four 10 Gigabit Ethernet and FCoE ports using the SFP+ interface, and 4 ports of 4/2/1-Gbps native Fibre Channel connectivity using the SFP interface Fibre Channel module that provides 8 ports of 4/2/1-Gbps native Fibre Channel using the SFP interface for transparent connectivity with existing Fibre Channel networks 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 25

3 Fibre Channel module that provides 6 ports of 8/4/2/1-Gbps native Fibre Channel using the SFP+ interface for transparent connectivity with existing Fibre Channel networks Figure 4. From Left to Right: 6-Port 10 Gigabit Ethernet and FCoE Module; 4-Port Fibre Channel plus 4-Port 10 Gigabit Ethernet and FCoE Module; 8-Port Native 4Gbps Fibre Channel Expansion Module and 6-Port Native 8Gbps Fibre Channel Module Cisco Nexus 2000 Series Fabric Extenders The Cisco Nexus 2000 Series Fabric Extenders comprise a category of data center products that provide a universal server-access platform that scales across a multitude of Gigabit Ethernet, 10 Gigabit Ethernet, unified fabric, rack, and blade server environments. The Cisco Nexus 2000 Series Fabric Extenders are designed to simplify data center architecture and operations by meeting the business and application needs of a data center. Working in conjunction with Cisco Nexus switches, the Cisco Nexus 2000 Series Fabric Extenders offer a cost-effective and efficient way to support today's Gigabit Ethernet environments while allowing easy migration to 10 Gigabit Ethernet, virtual machineaware Cisco unified fabric technologies. The Cisco Nexus 2000 Series design is aligned with that of servers. It offers front-to-back cooling, compatibility with data center hot-aisle and cold-aisle designs, placement of all switch ports at the rear of the unit in close proximity to server ports, and accessibility of all user-serviceable components from the front panel. The Cisco Nexus 2000 Series is built for nonstop operation, with redundant hot-swappable power supplies and a hot-swappable fan tray with redundant fans. Its compact 1RU form factor takes up relatively little space, making it easy to incorporate into rack designs (Figure 5). Figure 5. Cisco Nexus 2000 Series Fabric Extenders The Cisco Nexus 2000 Series provides two types of ports: ports for end-host attachment and uplink ports. Uplink ports are differentiated with a yellow color for connectivity to the upstream parent Cisco Nexus 5000 Series platform. Table 1 lists the Cisco Nexus 2000 Series Fabric Extenders. Fabric extenders can be mixed and matched to a parent switch to provide various connectivity options. Table 1. Description Cisco Nexus 2000 Series Specifications Specification Cisco Nexus 2148T Cisco Nexus 2224TP GE Cisco Nexus 2248TP GE Cisco Nexus 2232PP 10GE 48X 1000BASE-T ports and 4X 10 Gigabit Ethernet uplinks (SFP+) /1000BASE-T ports and 2 10 Gigabit Ethernet uplinks (SFP+) 48X 100/1000BASE-T ports and 4X 10 Gigabit Ethernet uplinks (SFP+) 32 1/10 Gigabit Ethernet/Fibre Channel over Ethernet (FCoE) ports (SFP+) and 8 10 Gigabit Ethernet/FCoE uplinks (SFP+) 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 25

4 The Cisco Nexus 2232PP 10GE Fabric Extender is the ideal platform for migration from Gigabit Ethernet to 10 Gigabit Ethernet and unified fabric environments. It supports the set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Cisco Nexus 2000 Series and Cisco Nexus 5000 Series Deployment Scenarios The fabric extenders can be used in the following deployment scenarios: Rack servers with Gigabit Ethernet or 10 Gigabit Ethernet NICs; the fabric extender can be physically located at the top of the rack, and the Cisco Nexus 5000 Series Switch can reside in the middle or at the end of the row Mixed Gigabit Ethernet and 10 Gigabit Ethernet environments in which rack servers are running at both speeds within the same rack or separate racks 10 Gigabit Ethernet and FCoE deployments; servers with CNAs for unified fabric environments with the Cisco Nexus 2232PP Server racks with integrated lights-out (ilo) management; 100 Megabit Ethernet or Gigabit Ethernet management and ilo interfaces Gigabit Ethernet and 10 Gigbabit Ethernet blade servers with pass-through blades Virtualized access The Cisco Nexus 2000 Series can be used in conjunction with the Cisco Nexus 5000 Series in two main design scenarios (shown in Figure 6): Cisco Nexus 2000 Series Fabric Extenders single-connected to one upstream Cisco Nexus 5000 Series Switch: In this deployment scenario, access-layer redundancy is achieved through redundant server connections to two upstream Cisco Nexus 5000 Series Switches, using Cisco virtual PortChannel (vpc) technology or server NIC teaming to two Cisco Nexus 2000 Series Fabric Extenders. Cisco Nexus 2000 Series Fabric Extenders dual-connected to two upstream Cisco Nexus 5000 Series Switches (using vpc): In this deployment scenario, access-layer redundancy is achieved through a combination of Cisco Nexus 2000 Series Fabric Extenders dual-connected to an upstream parent switch and server NIC teaming Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 25

5 Figure 6. Cisco Nexus 2000 Series Fabric Extenders Design Scenarios, from Left to Right: Cisco Nexus 2000 Series Single- Connected to One Upstream Cisco Nexus 5000 Series Switch, and Cisco Nexus 2000 Series Dual-Connected to Two Upstream Cisco Nexus 5000 Series Switches Efficient Transceiver and Cabling Options The Cisco Nexus 5000 Series supports a wide variety of 10 Gigabit Ethernet connectivity options using Cisco 10GBASE SFP+ modules. In addition, a subset of the ports on the Cisco Nexus 5020 and 5010 support Gigabit Ethernet connectivity options using 1GBASE SFP modules, 8/4/1-Gbps Fibre Channel SFP+ and 4/2/1-Gbps Fibre Channel SFP interfaces are supported with expansion module options. Table 2 lists the supported transceiver options. Table 2. Cisco SFP Cisco Nexus 5000 Series Transceiver Support Matrix Description Cisco SFP-10G-SR Cisco SFP-10G-LR Cisco SFP-H10GB-CU1M Cisco SFP-H10GB-CU3M Cisco SFP-H10GB-CU5M Cisco SFP-H10GB-ACU7M Cisco SFP-H10GB-ACU10M Cisco GLC-T Cisco GLC-SX-MM Cisco GLC-LH-SM Cisco SFP-GE-T Cisco SFP-GE-S Cisco-SFP-GE-L Cisco DS-SFP-FC4G-SW Cisco DS-SFP-FC4G-LW Cisco DS-SFP-FC8G-SW Cisco DS-SFP-FC8G-LW 10GBASE-SR SFP+ module (MMF) 10GBASE-LR SFP+ module (SMF) 10GBASE-CU SFP+ cable 1m (Twinax cable) 10GBASE-CU SFP+ cable 3m (Twinax cable) 10GBASE-CU SFP+ cable 5m (Twinax cable) 10GBASE-ACU SFP+ cable 7m (active Twinax cable) 10GBASE-ACU SFP+ cable 10m (active Twinax cable) 1000BASE-T SFP GE SFP, LC connector SX transceiver (MMF) GE SFP, LC connector LX/LH transceiver (SMF) 1000BASE-T SFP, extended temperature range GE SFP, LC connector SX transceiver (MMF), extended temperature range and digital optical monitoring (DOM) GE SFP, LC connector LX/LH transceiver (SMF), extended temperature range and DOM 4-Gbps Fibre Channel SW SFP, LC (for Fibre Channel expansion module ports) 4-Gbps Fibre Channel LW SFP, LC (for Fibre Channel expansion module ports) 8-Gbps Fibre Channel SW SFP+, LC (for Fibre Channel expansion module ports) 8-Gbps Fibre Channel LW SFP+, LC (for Fibre Channel expansion module ports) 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 25

6 The high bandwidth of 10 Gigabit Ethernet poses challenges to transmissions that are met by the transceiver and cabling options supported by the Cisco Nexus 5000 Series. The product family supports an innovative Twinax copper cabling solution that connects to standard SFP+ connectors for in-rack use, and optical cabling for longer cable runs (Table 3). For in-rack or adjacent-rack cabling, the Cisco Nexus 5000 Series supports SFP+ direct-attach 10 Gigabit Ethernet copper, an innovative solution that integrates transceivers with Twinax cables into an energyefficient, low-cost, and low-latency solution. SFP+ direct-attach 10 Gigabit Twinax copper cables use only 0.1 watt (W) of power per transceiver and introduce only approximately 0.25 microsecond of latency per link. For longer cable runs, the Cisco Nexus 5000 Series supports multimode, short-reach optical SFP+ transceivers. These optical transceivers use approximately 1W per transceiver and have a latency of less than 0.1 microsecond. Both these options provide lower latency and higher energy efficiency than 10GBASE-T. This standard uses transceivers that consume 4 to 8W per transceiver and contribute a latency of up to 2.5 microseconds per link, making the 10GBASE-T standard a significant contributor to network-level power consumption. Table 3. The Cisco Nexus 5000 Series Supports SFP+ Direct-Attach 10 Gigabit Copper for In-Rack Cabling, and Optical Solutions for Longer Connections Connector (Media) Cable Distance Power (Each Side) Transceiver Latency (Link) Standard SFP+ CU copper Twinax 5m ~0.1W ~0.1 microsecond SFF 8431 SFP+ ACU copper Active Twinax 7m and 10m ~0.5W ~6.8 nanoseconds SFF 8461 SFP+ SR MMF and SR MM OM2 MM OM3 82m 300m 1W ~0 microseconds IEEE 802.3ae RJ45 10GBASE-T copper (not supported; provided as comparison point) Cat6a or 7 30m 100m ~4W ~6W ~1.5 microseconds ~2.5 microseconds IEEE 802.3an Features and Benefits The Cisco Nexus 5000 Series' rich feature set makes it ideal for top-of-rack, middle-of-row, or end-of-row accesslayer applications. It protects investments in data center racks with standards based 10 Gigabit Ethernet and FCoE features, and virtual machine awareness features that allow IT departments to consolidate networks based on their own requirements and timing. The combination of high port density, lossless Ethernet, wire-speed performance, and extremely low latency makes the switch family ideal for meeting the growing demand for 10 Gigabit Ethernet that can support unified fabric in enterprise and service provider data centers, protecting enterprises' investments. The switch family has sufficient port density to support single and multiple racks fully populated with blade and rack-mount servers. Built for today's data centers, the switches are designed just like the servers they support. Ports and power connections are at the rear, closer to server ports, helping keep cable lengths as short and efficient as possible, delivering benefits traditionally offered on blade servers to rack servers as well. Hot-swappable power and fan modules can be accessed from the front panel, where status lights offer an at-a-glance view of switch operation. Front-to-back cooling is consistent with server designs, supporting efficient data center hotand cold-aisle designs. Serviceability is enhanced with all customer-replaceable units accessible from the front panel. The use of SFP+ ports offers increased flexibility, enabling use of a range of interconnect solutions, including copper Twinax cable for short runs and fiber for long runs Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 25

7 Data Center Bridging (DCB) enables Ethernet fabrics to support lossless transmission to increase network scalability, support I/O consolidation, ease management of multiple traffic flows, and optimize performance. Although implementing SAN consolidation requires only the lossless fabric provided by the Ethernet pause mechanism, the Cisco Nexus 5000 Series provides additional features that create an even more easily managed, high-performance, unified network fabric. Table 4. DCB Features and Benefits Feature Priority Flow Control (PFC): IEEE 802.1Qbb Enhanced Transmission Selection: IEEE 802.1Qaz Data Center Bridging Exchange (DCBX) Protocol Business Benefit Simplifies management of multiple traffic flows over a single network link Creates lossless behavior for Ethernet by allowing class-of-service (CoS)-based flow control Enables consistent management of quality of service (QoS) at the network level by providing consistent scheduling of different traffic types (IP, storage, etc.) Simplifies network deployment and reduces configuration errors by providing autonegotiation of DCB features between the NIC and the switch and between switches FCoE is a standards-based upper-layer protocol that maps the Fibre Channel Protocol (FCP) and services onto Layer 2 Ethernet. It is a straightforward encapsulation of Fibre Channel within Ethernet that preserves existing Fibre Channel network management models and tools, helping protect investments in software and staff training. Cisco unified fabric consolidates all data center I/O onto Layer 2 Ethernet. Unified fabric reduces capital and operating costs by reducing the number of server adapters, cables, and upstream switches needed. All I/O (LAN, SAN, and cluster) typically is consolidated onto two Ethernet links. DCB and FCoE enable the incorporation of Fibre Channel frames into a unified fabric, facilitating wire-once strategies in which all servers become capable of SAN connection. A standard and uniform approach to I/O enhances server and storage consolidation strategies. The Cisco Nexus 5000 Series also connects to existing native Fibre Channel networks, protecting current investments in storage networks. Additionally, the Cisco Nexus 5000 Series attaches to directly connected FCoE and Fibre Channel storage devices and, as FCoE-enabled switching becomes available across the data center, will support multi-tiered unified network fabric directly over FCoE. Energy efficiency achieved through the use of the Cisco Nexus 5000 Series Switches helps data centers operate within their space, power, and cooling parameters while reducing their carbon footprints. Every network link at the rack level requires adapters, switches, and transceivers, all of which consume power. I/O consolidation reduces energy consumption by eliminating the need for separate Fibre Channel adapters, cables, and switches. In many cases, server cluster networks also can be consolidated onto 10 Gigabit Ethernet networks, especially given the low latency of the Cisco Nexus 5000 Series. The switch hardware is also designed for energy efficiency. Variable-speed fans consume only the amount of power necessary to cool the chassis at the given point in time. The switch power supplies are sized to support worst-case scenarios, in which inefficient SFP+ transceivers increase power draw; however, when low-power cabling solutions are deployed, the switch family's power supplies maintain 90 percent efficiency at only 25 percent utilization, making efficient use of power in best-case scenarios. Consistent management for Cisco products is provided through consistency of both Cisco NX-OS Software and Cisco MDS 9000 SAN-OS Software management models and tools. The switch family network features can be managed using the Cisco command-line interface (CLI), and the Fibre Channel and FCoE features can be managed through the Cisco Fabric Manager suite. Cisco Data Center Network Manager (DCNM) will also support the Cisco Nexus 5000 Series Switches. The capability to manage Ethernet and FCoE features independently with existing Cisco tools preserves existing management models, best practices, and investments in staff training. In addition, Simple Network Management Protocol (SNMP) MIBs, XML, and the Cisco CLI are made available to customers for switch management through third-party and customdeveloped tools. The switch family uses Cisco NX-OS for superior operational efficiency, pervasive security, and continuous operation even through software upgrades Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 25

8 Software manageability and serviceability features include Smart Call Home and automated parameter exchange (through DCBX). Security is enhanced through role-based access control (RBAC); support for authentication, authorization, and accounting (AAA), remote TACACS+, and RADIUS servers; and Secure Shell (SSH) access. Applications The Cisco Nexus 5000 Series supports a number of application scenarios that use it as an access-layer switch colocated with servers in data center racks or for middle-of-row deployments. As an access-layer switch, it can be used purely as a 10 Gigabit Ethernet switch, consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked to the aggregation layer. In conjunction with the Cisco Nexus 2248TP GE Fabric Extender, the Cisco Nexus 5000 Series can be a high-density Gigabit Ethernet switching system, consolidating more than 576 Gigabit Ethernet connections within a single management plane. As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the aggregation layer and carries FCoE traffic to existing Fibre Channel SANs. As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the access layer and provides interoperability with the Cisco Nexus 5000 Series and other standards-based products. The capability of the Cisco Nexus 5000 Series to function in all these capacities helps protect investment in the data center with a deployment model in which additional features can be enabled as they are needed. Rack-Level 10 Gigabit Ethernet Access-Layer Switch The Cisco Nexus 5000 Series is designed with the density, performance, front-to-back cooling, and rear port configuration that make it ideal for aggregating a large number of 10 Gigabit Ethernet links from servers into a smaller number of uplinks to aggregation-layer switches. The switch port density allows each switch to support a single rack or neighboring racks using the SFP+ direct-attach 10 Gigabit copper cabling option. The Cisco Nexus 5000 Series Switches can be purchased with only the Ethernet capabilities enabled, allowing IT departments to deploy them in parallel with existing Fibre Channel SANs. Figure 7 shows an active-active pair of Cisco Nexus 5000 Series Switches cross-connected to redundant Ethernet NICs in servers. Instead of using multiple Gigabit Ethernet connections to servers for LAN, virtual machine mobility applications, and Small Computer System Interface over IP (iscsi) SAN support, customers can combine their traffic over a consolidated, lossless, low-latency 10 Gigabit Ethernet fabric Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 25

9 Figure 7. The Cisco Nexus 5000 Series Can Be Deployed as a Top-of-Rack, Access-Layer Switch in Parallel with Existing Fibre Channel SANs Consolidated Gigabit Ethernet Top-of-Rack Access-Layer System One deployment scenario involves equipping each data center rack with two Cisco Nexus 2148T Gigabit Ethernet fabric extenders connected to two upstream Cisco Nexus 5000 Series Switches (Figure 8). Up to 48 servers can connect to each fabric extender. Assuming that these servers are dual-homed, a pair of Cisco Nexus 5020 Switches can connect up to 576 servers (12 fabric extenders) Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 25

10 Figure 8. Sample Top-of-Rack Deployment Scenario Supporting Up to 576 Servers with a Single Pair of Access-Layer Switches and No Oversubscription at the Rack Level Unified Fabric with FCoE: I/O Consolidation The Cisco Nexus 5000 Series consolidates multiple networks-lan, SAN, and server cluster-on a single unified fabric, saving the capital and operating expenses associated with deployment of multiple parallel networks, switching infrastructure, and cabling. The Cisco Nexus 5000 Series Switches are compatible with third-party I/O CNAs that present separate Ethernet NICs and Fibre Channel HBAs to the server operating system. This approach allows existing drivers and Fibre Channel management software to work transparently with FCoE. Upstream, three different expansion modules support direct connections from the Cisco Nexus 5000 Series to existing native Fibre Channel SANs using dedicated native Fibre Channel ports (Figure 9). Nexus 5000 can also be connected to upstream FCoE capable switches via industry standards compliant VE_port ISLs Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 25

11 Figure 9. A Pair of Cisco Nexus 5000 Series Switches in an Active-Active Configuration with Native Fibre Channel Connections to Two Storage Networks Investment Protection with FCoE Unified Fabric The Cisco Nexus 5000 Series supports consolidated I/O using FCoE on downlinks to servers. FCoE is Fibre Channel and, as such, has familiar methods of configuration, operation, and management. On the uplinks to the network, customers can choose among FCoE direct attachment to storage systems, native Fibre Channel direct attachment to storage systems, FCoE connection to FCoE-capable switches and native Fibre Channel connection to existing SANs. Fibre Channel and FCoE exist simultaneously in the Fibre Channel network, allowing customers to continue to use their existing administration and management tools. Cisco Fabric Manager SAN management software manages Fibre Channel and FCoE flows over both FCoE- and Fibre Channel-capable ports. Product Architecture The Cisco Nexus 5000 Series is built around two custom components: a unified crossbar fabric and a unified port controller application-specific integrated circuit ((ASIC). Each Cisco Nexus 5000 Series Switch contains a single unified crossbar fabric ASIC and multiple unified port controllers to support fixed ports and expansion modules within the switch. The unified port controller provides an interface between the unified crossbar fabric ASIC and the network media adapter and makes forwarding decisions for Ethernet, Fibre Channel, and FCoE frames. The ASIC supports the overall cut-through design of the switch by transmitting packets to the unified crossbar fabric before the entire payload has been received. The unified crossbar fabric ASIC is a single-stage, nonblocking crossbar fabric capable of meshing all ports at wire speed. The unified crossbar fabric offers superior performance by implementing QoSaware scheduling for unicast and multicast traffic. Moreover, the tight integration of the unified crossbar fabric with the unified port controllers helps ensure low-latency lossless fabric for ingress interfaces requesting access to egress interfaces Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 25

12 Cisco NX-OS Software Overview Cisco NX-OS is a data center-class operating system built with modularity, resiliency, and serviceability at its foundation. Based on the industry-proven Cisco MDS 9000 SAN-OS Software, Cisco NX-OS helps ensure continuous availability and sets the standard for mission-critical data center environments. The self-healing and highly modular design of Cisco NX-OS makes zero-impact operations a reality and enables exceptional operational flexibility. Focused on the requirements of the data center, Cisco NX-OS provides a robust and rich feature set that fulfills the Ethernet and storage networking requirements of present and future data centers. With an XML interface and a CLI like that of Cisco IOS Software, Cisco NX-OS provides state-of-the-art implementations of relevant networking standards as well as a variety of true data center-class Cisco innovations. Cisco NX-OS Software Features and Benefits Software compatibility: Cisco NX-OS Software Release 5.0 interoperates with Cisco products running any variant of the Cisco IOS Software operating system. Cisco NX-OS 5.0 also interoperates with any networking OS that conforms to the networking standards listed as supported in this data sheet. Common software throughout the data center: Cisco NX-OS simplifies the data center operating environment and provides a unified OS designed to run all areas of the data center network, including the LAN, SAN, and Layer 4 to 7 network services. Modular software design: Cisco NX-OS is designed to support distributed multithreaded processing on symmetric multiprocessors (SMPs), multicore CPUs, and distributed line-card processors. Computationally intensive tasks, such as hardware table programming, can be offloaded to dedicated processors distributed across the line cards. Cisco NX-OS modular processes are instantiated on demand, each in a separate protected memory space. Thus, processes are started and system resources allocated only when a feature is enabled. The modular processes are governed by a real-time preemptive scheduler that helps ensure the timely processing of critical functions. Quick development of enhancements and problem fixes: The modularity of Cisco NX-OS allows new features, enhancements, and problem fixes to be integrated into the software quickly. Thus, modular fixes can be developed, tested, and delivered in a short time span. Troubleshooting and diagnostics: Cisco NX-OS is built with unique serviceability functions to enable network operators to take early action based on network trends and events, enhancing network planning and improving network operations center (NOC) and vendor response times. Smart Call Home and Cisco Generic Online Diagnostics (GOLD) are some of the features that enhance the serviceability of Cisco NX-OS. Smart Call Home: The Smart Call Home feature continuously monitors hardware and software components to provide -based notification of critical system events. A versatile range of message formats is available for optimal compatibility with pager services, standard , and XML-based automated parsing applications. This feature offers alert grouping capabilities and customizable destination profiles. It can be used, for example, to directly page a network support engineer, send an message to a NOC, and employ Cisco Auto-Notify services to directly generate a case with the Cisco Technical Assistance Center (TAC). This feature is a step toward autonomous system operation, enabling networking devices to inform IT when a problem occurs and helping ensure that the problem is acted on quickly, reducing time to resolution and increasing system uptime. Cisco GOLD: Cisco GOLD is a suite of diagnostic facilities to verify that hardware and internal data paths are operating as designed. Boot-time diagnostics, continuous monitoring, and on-demand and scheduled tests are part of the Cisco GOLD feature set. This industry-leading diagnostics subsystem allows rapid fault isolation and continuous system monitoring, critical in today's continuously operating environments Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 25

13 Programmatic XML interface: Based on the NETCONF industry standard, the Cisco NX-OS XML interface provides a consistent API for devices, enabling rapid development and creation of tools to enhance the network. SNMP: Cisco NX-OS complies with SNMPv1, v2, and v3. A rich collection of MIBs is supported. RBAC: With RBAC, Cisco NX-OS enables administrators to limit access to switch operations by assigning roles to users. Administrators can customize access and restrict it to the users who require it. Product Specifications Performance Cisco Nexus 5020: Layer 2 hardware forwarding at 1.04 Tbps or million packets per second (mpps) Cisco Nexus 5010: Layer 2 hardware forwarding at 520 Gbps or mpps MAC address table entries: 16,000 Low-latency cut-through design that provides predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features on 10 Gigabit Ethernet interfaces Line-rate traffic throughput on all ports Interfaces Cisco Nexus 5020: 40 fixed 10 Gigabit Ethernet and FCoE ports (ports 1 to 16 are Gigabit Ethernet and 10 Gigabit Ethernet); additional interfaces through two expansion modules Cisco Nexus 5010: 20 fixed 10 Gigabit Ethernet and FCoE Ports (ports 1 to 8 are Gigabit Ethernet and 10 Gigabit Ethernet); additional interfaces through one expansion module Expansion modules: 6-port 10 Gigabit Ethernet and FCoE module 4-port 4/2/1-Gbps Fibre Channel plus 4-port 10 Gigabit Ethernet and FCoE module 8-port native 4/2/1-Gbps Fibre Channel expansion module 6-port native 8/4/2/1-Gbps Fibre Channel expansion module Extension through the Cisco Nexus 2000 Series (up to 12 fabric extenders per Cisco Nexus 5000 Series Switch) Layer 2 Features Layer 2 switch ports and VLAN trunks IEEE 802.1Q VLAN encapsulation Support for up to 507 VLANs per switch Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible) Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances Spanning Tree PortFast and PortFast Guard Spanning Tree UplinkFast and BackboneFast Spanning Tree Root Guard Spanning Tree Bridge Assurance NIC teaming Cisco EtherChannel technology (up to 16 ports per EtherChannel) Cisco vpc technology Link Aggregation Control Protocol (LACP): IEEE 802.3ad 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 25

14 Advanced PortChannel hashing based on Layer 2, 3, and 4 information Jumbo frames on all ports (up to 9216 bytes) Pause frames (IEEE 802.3x) Storm control (unicast, multicast, and broadcast) Private VLANs Private VLAN over trunks (isolated and promiscuous) Private VLANs over vpc and EtherChannels VTP Client and Server (Versions 1 and 2) QoS Layer 2 IEEE 802.1p (CoS) 8 hardware queues per port Per-port QoS configuration CoS trust CoS marking Port-based CoS assignment Modular QoS CLI (MQC) compliance Access control list (ACL)-based QoS classification (Layers 2, 3 and 4) MQC CoS marking Per-port virtual output queuing CoS-based egress queuing Egress strict-priority queuing Egress port-based scheduling: Weighted Round-Robin (WRR) Security Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc. Standard and extended Layer 3 to 4 ACLs: IPv4 and v6, Internet Control Message Protocol (ICMP), TCP, User Datagram Protocol (UDP), etc. VLAN-based ACLs (VACLs) Port-based ACLs (PACLs) Named ACLs ACL logging and statistics Optimized ACL distribution ACLs on VTY Dynamic Host Configuration Protocol (DHCP) snooping with Option 82 High-Availability Features ISSU Hot-swappable field-replaceable power supplies, fan modules, and expansion modules 1:1 power redundancy N:1 fan module redundancy 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 25

15 Management Switch management using 10/100/1000-Mbps management or console ports CLI-based console to provide detailed out-of-band management In-band switch management Locator and beacon LEDs on Cisco Nexus 2000 Series vpc configuration synchronization Module preprovisioning Configuration rollback Port-based locator and beacon LEDs SSHv2 Telnet Authentication, authorization, and accounting (AAA) AAA with RBAC RADIUS TACACS+ Syslog Embedded packet analyzer SNMP v1, v2, and v3 Enhanced SNMP MIB support XML (NETCONF) support Remote monitoring (RMON) Advanced Encryption Standard (AES) for management traffic Unified username and passwords across CLI and SNMP Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) Digital certificates for management between switch and RADIUS server Cisco Discovery Protocol Versions 1 and 2 RBAC Switched Port Analyzer (SPAN) on physical, PortChannel, VLAN, and Fibre Channel interfaces Ingress and egress packet counters per interface Network Time Protocol (NTP) Cisco GOLD Comprehensive bootup diagnostic tests Call Home Smart Call Home Cisco Fabric Manager Cisco DCNM CiscoWorks LAN Management Solution (LMS) 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 25

16 Data Center Bridging IEEE 802.1Qbb and CEE compliant PFC (per-priority pause frame support) PFC link distance support: 3000m maximum CEE compliant DCBX Protocol IEEE 802.1Qaz and CEE compliant Enhanced Transmission Selection Fibre Channel and FCoE Features (Requires Storage Services License) T11 standards-compliant FCoE (FC-BB-5) T11 FCoE Initialization Protocol (FIP) (FC-BB-5) Multi-hop FCoE with VE-port support Any 10 Gigabit Ethernet port configurable as FCoE SAN administration separate from LAN administration FCP Fibre Channel forwarding (FCF) Fibre Channel standard port types: E, F, and NP Fibre Channel enhanced port types: VE, TE, and VF F-port trunking F-port channeling Direct attachment of FCoE and Fibre Channel targets Up to 64 native Fibre Channel buffer credits per port VSANs Fibre Channel (SAN) PortChannel Native Interop Mode 2 Native Interop Mode 3 VSAN trunking Fabric Device Management Interface (FDMI) Fibre Channel ID (FCID) persistence Distributed device alias services In-order delivery Port tracking N-port virtualization (NPV) N-port identifier virtualization (NPIV) Fabric services: Name server, registered state change notification (RSCN), login services, and name-server zoning Per-VSAN fabric services Cisco Fabric Services Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) and Fibre Channel Security Protocol (FC-SP) Distributed device alias services Host-to-switch and switch-to-switch FC-SP authentication 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 25

17 Fabric Shortest Path First (FSPF) Fabric binding for Fibre Channel Standard zoning Port security Domain and port Enhanced zoning SAN PortChannels Cisco Fabric Analyzer Fibre Channel traceroute Fibre Channel ping Fibre Channel debugging Cisco Fabric Manager support Storage Management Initiative Specification (SMI-S) SNMP MIBs Generic MIBs SNMPv2-SMI CISCO-SMI SNMPv2-TM SNMPv2-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IANAiprouteprotocol-MIB HCNUM-TC CISCO-TC SNMPv2-MIB SNMP-COMMUNITY-MIB SNMP-FRAMEWORK-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMP-USER-BASED-SM-MIB SNMP-VIEW-BASED-ACM-MIB CISCO-SNMP-VACM-EXT-MIB Fibre Channel MIBs CISCO-ST-TC CISCO-FC-FE-MIB CISCO-FCSP-MIB CISCO-PORT-TRACK-MIB CISCO-PSM-MIB CISCO-FC-SPAN-MIB 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 25

18 CISCO-PORT-CHANNEL-MIB CISCO-RSCN-MIB CISCO-NS-MIB CISCO-FCS-MIB CISCO-DM-MIB FIBRE-CHANNEL-FE-MIB CISCO-FC-ROUTE-MIB CISCO-FSPF-MIB CISCO-ZS-MIB CISCO-ZS-EXT-MIB CISCO-VSAN-MIB CISCO-CFS-MIB CISCO-FCPING-MIB CISCO-FCTRACEROUTE-MIB CISCO-FDMI-MIB CISCO-FC-DEVICE-ALIAS-MIB CISCO-WWNMGR-MIB FCMGMT-MIB CISCO-VEDM-MIB CISCO-FCOE-MIB Ethernet MIBs CISCO-VLAN-MEMBERSHIP-MIB Configuration MIBs ENTITY-MIB IF-MIB CISCO-ENTITY-EXT-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-ENTITY-SENSOR-MIB CISCO-FLASH-MIB CISCO-SYSTEM-MIB CISCO-SYSTEM-EXT-MIB CISCO-IP-IF-MIB CISCO-IF-EXTENSION-MIB CISCO-SERVER-INTERFACE-MIB CISCO-NTP-MIB CISCO-IMAGE-MIB CISCO-IMAGE-CHECK-MIB CISCO-IMAGE-UPGRADE-MIB CISCO-CONFIG-COPY-MIB 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 18 of 25

19 CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-BRIDGE-MIB Monitoring MIBs DIFFSERV-DSCP-TC NOTIFICATION-LOG-MIB DIFFSERV-MIB CISCO-CALLHOME-MIB CISCO-SYSLOG-EXT-MIB CISCO-PROCESS-MIB RMON-MIB CISCO-RMON-CONFIG-MIB CISCO-HC-ALARM-MIB Security MIBs CISCO-AAA-SERVER-MIB CISCO-AAA-SERVER-EXT-MIB CISCO-COMMON-ROLES-MIB CISCO-COMMON-MGMT-MIB CISCO-RADIUS-MIB CISCO-SECURE-SHELL-MIB TCP/IP MIBs INET-ADDRESS-MIB TCP-MIB CISCO-TCP-MIB UDP-MIB IP-MIB CISCO-IP-PROTOCOL-FILTER-MIB CISCO-DNS-CLIENT-MIB Miscellaneous MIBs START-MIB CISCO-LICENSE-MGR-MIB CISCO-FEATURE-CONTROL-MIB CISCO-CDP-MIB CISCO-RF-MIB CISCO-ETHERNET-FABRIC-EXTENDER-MIB CISCO-BRIDGE-MIB CISCO-VTP-MIB 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 25

20 Standards Industry Standards IEEE 802.1D: Spanning Tree Protocol IEEE 802.1p: CoS prioritization IEEE 802.1Q: VLAN tagging IEEE 802.1Qaz: Enhanced Transmission Selection IEEE 802.1Qbb: Per Priority Pause IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol IEEE 802.3: Ethernet IEEE 802.3ad: LACP with fast timers IEEE 802.3ae: 10 Gigabit Ethernet SFF 8431 SFP+ CX1 support RMON Fibre Channel Standards FC-PH, Revision 4.3 (ANSI/INCITS ) FC-PH, Amendment 1 (ANSI/INCITS /AM1 1996) FC-PH, Amendment 2 (ANSI/INCITS /AM2-1999) FC-PH-2, Revision 7.4 (ANSI/INCITS ) FC-PH-3, Revision 9.4 (ANSI/INCITS ) FC-PI, Revision 13 (ANSI/INCITS ) FC-PI-2, Revision 10 (ANSI/INCITS ) FC-PI-4, Revision 7.0 FC-FS, Revision 1.9 (ANSI/INCITS ) FC-FS-2, Revision 0.91 FC-LS, Revision 1.2 FC-SW-2, Revision 5.3 (ANSI/INCITS ) FC-SW-3, Revision 6.6 (ANSI/INCITS ) FC-GS-3, Revision 7.01 (ANSI/INCITS ) FC-GS-4, Revision 7.91 (ANSI/INCITS ) FC-BB-5, Revision 2.0 for FCoE FCP, Revision 12 (ANSI/INCITS ) FCP-2, Revision 8 (ANSI/INCITS ) FCP-3, Revision 4 (ANSI/INCITS ) FC-MI, Revision 1.92 (INCITS TR , except for FL-ports and Class 2) FC-MI-2, Revision 2.6 (INCITS TR , except for FL-ports and Class 2) FC-SP, Revision 1.6 FC-DA, Revision 3.1 (INCITS TR , except for FL-ports, SB-ports and Class 2) Class of Service: Class 3, Class F 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 25

21 Fibre Channel standard port types: E and F Fibre Channel enhanced port types: SD and TE Physical Specifications SFP+ Optics Cisco Nexus 5000 Series products support 10 Gigabit Ethernet SFP+ copper Twinax cables for short distances and SFP+ optics (10GBASE-SR and 10GBASE-LR) for longer distances. SFP+ has several advantages compared to other 10 Gigabit Ethernet connectivity options: Smallest 10 Gigabit Ethernet form factor Optical interoperability with XENPAK, X2, and XFP interface types Lowest power consumption Hot-swappable device Cisco Nexus 5000 Series products support 8-Gbps Fibre Channel-compatible SFP+ for native Fibre Channel connectivity options; 8-Gbps Fibre Channel-compatible short-reach and 10-km long-reach SFP transceiver modules operate at 8/4/2 Gbps and are supported in the 8Gbps capable native Fibre Channel ports on expansion modules. SFP Optics Cisco Nexus 5000 Series products support Gigabit Ethernet SFP for Gigabit Ethernet connectivity options, available in both standard and extended temperature ranges with DOM support. The following SFP transceiver modules are supported in ports 1 to 8 of the Cisco Nexus 5010 and ports 1 to 16 of the Cisco Nexus 5020: Cisco 1000BASE-T SFP Cisco 1000BASE-SX SFP Cisco 1000BASE-LX/LR SFP Cisco Nexus 5000 Series products support 4-Gbps Fibre Channel-compatible SFPs for native Fibre Channel connectivity options; 4-Gbps Fibre Channel-compatible short-reach and 10-km long-reach SFP transceiver modules operate at 4/2/1 Gbps and are supported in the native Fibre Channel ports on expansion modules. Power Supply Table 5 lists the power supply properties of the Cisco Nexus 5010 and Table 5. Power Supply Properties AC Power Supply Properties Cisco Nexus 5010 Cisco Nexus 5020 Typical operating power 350W 480W Maximum power 450W 750W Input voltage 100 to 240 VAC 100 to 240 VAC Frequency 50 to 60 Hz 50 to 60 Hz Efficiency 88 to 90% 1200W: 82 to 88% 750W: 92% RoHS compliance Yes Yes Hot swappable Yes Yes Heat dissipation 1536 BTU/hr 1200W: 2561 BTU/hr 750W: 2500 BTU/hr 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 21 of 25

22 Environment Table 6 lists the environment properties of the Cisco Nexus 5010 and Table 6. Environment Properties Property Cisco Nexus 5010 Cisco Nexus 5020 Physical (height x width x depth) 1.72 x 17.3 x 30.0 in. (4.4 x 43.9 x 76.2 cm) 3.47 x 17.3 x 30.0 in. (8.8 x 43.9 x 76.2 cm) Operating temperature 32 to 104 F (0 to 40 C) 32 to 104 F (0 to 40 C) Nonoperating (storage) temperature -40 to 158 F (-40 to 70 C) -40 to 158 F (-40 to 70 C) Humidity 5 to 95% (noncondensing) 5 to 95% (noncondensing) Altitude 0 to 10,000 ft (0 to 300m) 0 to 10,000 ft (0 to 300m) Weight Table 7 lists the weight of the Cisco Nexus 5010 and Table 7. Weight Component Cisco Nexus 5020 with 2 power supplies, 2 expansion modules, and 5 fan modules Cisco Nexus 5010 with 2 power supplies, 1 expansion module, and 2 fan modules Weight 50 lb (22.68 kg) 35 lb (15.88 kg) Software Requirements Cisco Nexus 5000 Series Switches are supported by Cisco NX-OS Software Release 4.0 and later. Cisco NX-OS interoperates with any networking OS, including Cisco IOS Software, that conforms to the networking standards mentioned in this data sheet. For the latest software release information and recommendations, please see the product bulletin at Regulatory Standards Compliance Table 8 summarizes regulatory standards compliance for the Cisco Nexus 5000 Series. Table 8. Specification Regulatory Standards Compliance: Safety and EMC Description Regulatory compliance Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC. Safety UL CAN/CSA-C22.2 No EN IEC AS/NZS GB4943 EMC: Emissions 47CFR Part 15 (CFR 47) Class A AS/NZS CISPR22 Class A CISPR22 Class A EN55022 Class A ICES003 Class A VCCI Class A EN EN KN22 Class A CNS13438 Class A 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 22 of 25

23 Specification EMC: Immunity RoHS Description EN EN EN55024 CISPR24 EN KN series The product is RoHS 5 compliant with exceptions for leaded ball grid array (BGA) balls and lead press-fit connectors. Ordering Information Table 9 presents ordering information for the Cisco Nexus 5000 Series. Table 9. Part Number Ordering Information Description Chassis N5K-C5010P-BF N5K-C5020P-BF Cisco Nexus RU Chassis no PS, 2 Fan Modules, 20 ports (req SFP+) Cisco Nexus RU Chassis no PS, 5 Fan Modules, 40 ports (req SFP+) Fan Modules N5K-C5010-FAN= N5K-C5020-FAN= Cisco Nexus 5010 Fan Module, Spare Cisco Nexus 5020 Fan Module, Spare Power Supplies N5K-PAC-550W(=) N5K-P1-BLNK(=) N5K-PAC-1200W(=) N5K-PAC-750W(=) N5K-P2-BLNK(=) Cisco Nexus 5010 PSU module, A/C, V, 550W Cisco Nexus 5010 PSU module, Blank slot cover Cisco Nexus 5020 PSU module, A/C, V, 1200W Cisco Nexus 5020 PSU module, A/C, V, 750W Cisco Nexus 5020 PSU module, Blank slot cover Software N5KUK9-413.N2.1(=) N5KUK9-421.N1.1(=) N5KUK9-421.N2.1(=) N5KUK9-502.N1.1(=) Cisco Nexus 5000 Base OS Software Release 4.1(3)N2(1) Cisco Nexus 5000 Base OS Software Release 4.2(1)N1(1) Cisco Nexus 5000 Base OS Software Release 4.2(1)N2(1) Cisco Nexus 5000 Base OS Software Release 5.0(2)N1(1) Software Licenses N5010-SSK9(=) N5020-SSK9(=) N5000FMS1K9(=) Cisco Nexus 5010 Storage Protocol Services License Cisco Nexus 5020 Storage Protocol Services License Cisco Nexus 5000 Fabric Manager Server License Expansion Modules N5K-M1600(=) N5K-M1404(=) N5K-M1008(=) N5K-M1060(=) N5K-M1-BLNK(=) Cisco Nexus Series Module 6-port 10 Gigabit Ethernet (req SFP+) Cisco Nexus Series Module 4x10GE 4xFC 4/2/1 (Requires SFP+, SFP) Cisco Nexus Series Module 8xFC 4/2/1 (Requires SFP) Cisco Nexus Series Module 6xFC 8/4/2/1 (Requires SFP+ for 8Gbps or SFP for 4Gbps operation) Cisco Nexus Series Expansion Module Blank Cables and Optics SFP-10G-SR(=) SFP-10G-LR(=) SFP-H10GB-CU1M(=) SFP-H10GB-CU3M(=) SFP-H10GB-CU5M(=) 10GBASE-SR SFP+ Module 10GBASE-LR SFP+ Module 10GBASE-CU SFP+ Cable 1 Meter 10GBASE-CU SFP+ Cable 3 Meter 10GBASE-CU SFP+ Cable 5 Meter 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 23 of 25