Deployment Guide GSD-604HP 4-PORT 10/100/1000T 802.3AT POE+ 2-PORT DESKTOP SWITCH (55W POE BUDGET, EXTERNAL PSU)

Transcription

1 GSD-803PD 8-PORT 10/100/1000MBPS GIGABIT ETHERNET PD SWITCH (BUILT-IN POE SPLITTER) Gigabit Plug & Play AUTO Negotiation PD Jumbo Frame Metal Made Application: Specify the GSD-803 when customers are scaling up and adding additional network devices (up to 8) rather than upgrading their network. It provides 5V power which reduces the need to run additional cables and connects up to 8x network devices from a single cable. It s the perfect solution for deploying multiple Smart TVs. GSD-604HP 4-PORT 10/100/1000T 802.3AT POE+ 2-PORT DESKTOP SWITCH (55W POE BUDGET, EXTERNAL PSU) 10M/100M 1000M Per Port Metal Made Port FANLESS Application: Specify the GSD-604HP for small network applications such as small Dahua IP CCTV installations with up to 4x cameras. The on-board hard dip-switch enables you to conveniently ports to isolate the traffic on each port and prevent storms. It also features an Extended mode which extends the range up to 250m for of 10Mb per port (ample bandwidth for a CCTV stream). 2x Gbps uplinks provide dual Gigabit links to a NVR and/or router.

2 WGS-804HP IP30 8-PORT GIGABIT WALL-MOUNT SWITCH WITH 4-PORT 802.3AT POE+ (-10 TO 60 C) Application: The WGS-804HP is a compact go anywhere 4-port + switch, perfect for hostile environments. Its rugged IP30 housing means it s designed to withstand a massive temperature range (-10 to + 60 C) making it the ideal solution for hostile environments. Flexible mounting options support discreet installations in cupboards or gate houses to power and connect entry systems / remote Dahua IP CCTV cameras to the network. Per Port WALL Mountable Full Ports Gigabit IP Code C -10 C GSW-2620HP 24-PORT POE UNMANAGED GIGABIT ETHERNET SWITCH, 220W, 1U 10M/100M 1000M Jumbo Frame Metal Made Application: Specify the GSW-2620HP for non-complex installations such as control system environments. For instance, Control 4 recommends the use of a non-managed switch to power and connect touch panels and other control system devices. With 24-ports and a total 220W power budget it provides an additional 40W of power over typical unmanaged switches within this product category.

3 FGSD-1022VHP 8-PORT 10/100TX 802.3AT POE + 2- PORT GIGABIT TP/SFP COMBO DESKTOP SWITCH C/W LCD POE MONITOR + Status Port Gigabit Uplink SFP Application: Specify the FGSD-1022VHP for medium sized network applications such as Dahua IP CCTV installations with up to 8x cameras. On-board hard dip-switches enables you to conveniently ports to isolate the traffic on each port and prevent storms. It also features an Extended mode which extends the range up to 250m for of 10Mb per port (ample bandwidth for a Dahua IP CCTV video stream). 2x TP/SFP fibre Gigabit uplinks provide dual Gigabit links to a NVR and router. The FGSD-1022VHP provides an on-board LCD display which reports real-time loading of each port, total power usage and system status. FGSD-2622VHP 24-PORT 10/100TX 802.3AT POE+ 2-PORT GIGABIT TP/SFP COMBO ETHERNET SWITCH LCD POE MONITOR + Status Port Gigabit Uplink SFP Application: Specify the FGSW-2622VHP for larger network applications such as Dahua IP CCTV installations with up to 24x cameras. On-board hard dip-switches enable you to conveniently ports to isolate the traffic on each port and prevent storms. It also features an Extended mode which extends the range up to 250m for of 10Mb per port (ample bandwidth for a CCTV video stream). 2x TP/SFP fibre Gigabit uplinks provide dual Gigabit links to a NVR and router. The FGSD-1022VHP provides an on-board LCD display which reports real-time loading of each port, total power usage and system status.

4 MGB-SX / MTB-SR SMALL FORM FACTOR PLUGGABLE (SFP) MINI-GBIC GIGABIT ETHERNET TRANSCEIVER MODULES FOR 1000BASE AND 10GBASE FIBRE CONNECTIONS Application: Provide fast duplex data links over optical fibre connections (Single- Mode or Multi-Mode) with select switches. They re easy to install and hot pluggable to reduce any network interruption. Smart switches All smart switches listed below feature advanced intelligent management functions which enable you to maximise the performance of devices on your installations. The ability to schedule power cycling is a particularly useful function which enables you to schedule a troublesome device to reboot every Friday at 11pm for example (up to 4 programmable profiles are available). PD Status Good!! Alarm Notification Step 1 Step 2 Ping Request Ping Echo Step 3 ON OFF PT Camera Restart device if without responce Ping Request Check alive status for 3 minutes PD Alive!! No Response... Step 4 ON OFF PT Camera ON OFF ON Automatically Reboot Every Friday 23:00 CPU/Buffer Load 10% CPU/Buffer Load 85%

5 WGS P2S SMART 8-PORT 1000T 802.3AT POE+ 2-PORT 100/1000X SFP WALL-MOUNT MANAGED ETHERNET SWITCH Application: The WGS-4215 is a larger Managed variant of the WGS-804HP switch which provides 8x + ports and twin SFP ports, extending the data range to 10km. With Layer 4 HTI security protocol, you can apply higher security rules such as only known MAC addresses can connect to the network. It d rugged IP30 housing means it will withstand a massive temperature range (-10 to + 60 C) making it the ideal solution for hostile environments. Flexible mounting options support discreet installations in cupboards or gate houses to power and connect entry systems / remote Dahua IP CCTV cameras to the network. IPv6/IPv4 ACL/Qo5 75 C -40 C 1GMP Snooping IP Code 30 Per Port GS P4C SMART 24-PORT MANAGED 802.3AT POE+ GIGABIT ETHERNET SWITCH + 4-PORT GIGABIT COMBO TP/SFP (220W) Schedule 1GMP Snooping IPv6/IPv4 ACL/Qo5 Application: Specify the GS-4210 is suitable for more complex network applications where additional management and security features are required. It s an advanced L2/L4 managed 24-port + switch with a 220W power budget with 4x Gigabit TP/SFP uplinks. It s suitable for managing and monitoring power to PD devices, such as laptops, switches, etc.

6 WGSW-48040HP SMART 48-PORT L2+ 10/100/1000T 802.3AT POE+ PLUS 4 SHARED 100/1000MBPS SFP MANAGED SWITCH End-span IPv6 Management Application: Specify the WGSW for larger networking applications with up to 48x ports within a compact 1U rack-mount chassis. Programmable features and efficient traffic routing make it particularly suitable for larger VOIP and Dahua IP CCTV installations. This is the switch to specify for apartment blocks / other multi-dwelling properties with many networking devices. Occupying only 1U 19 rack space, the can power up to 48x devices with a massive 600W budget (over double the typical power of 2x standard 24-port switches). SGS P2X SMART 24-PORT LAYER 2+ POE MANAGED ETHERNET SWITCH WITH 2-PORT 10G SFP L3 STATIC ROUTING, 1U End-span IPv6 Management Application: Specify the SGS-5220 for stackable / scalable switching solutions / larger network applications. Featuring 24-ports with a total power budget of 440W per switch, up to 16x switches can be stacked to provide up to 384x network ports. On-board Layer 3 static routing enables Network Managers to centrally manage the stack with a single IP address. Each switch is equipped with 4x shared Gigabit SFP slots, 2x 10G SFP+ uplink slots and 2x dedicated 10G SFP+ ports for stacking.

7 INTRODUCING THE NEW ULTRA RANGE GS UP4C SMART 16-PORT MANAGED 60W ULTRA POE GIGABIT ETHERNET SWITCH + 4-PORT GIGABIT COMBO TP/SFP, 400W, 1U IPv6/IPv4 ACL/Qo5 1GMP Snooping PD Application: Specify the GS port managed Ultra switch for powering and connecting network devices which require more power than standard devices. Ultra offers 60W per port with Intelligent functionality such as powering and connecting Dahua IP PTZ cameras, thin clients, laptops and AIO Touch PCs. GS UP4C SMART 24-PORT 10/100/1000T ULTRA POE + 4-PORT GIGABIT TP/SFP COMBO MANAGED SWITCH IPv6/IPv4 ACL/Qo5 1GMP Snooping PD Application: A larger 24-port variant of the GS UP4C managed Ultra switch. Specify it to power and connect network devices which require more power than standard devices. Ultra offers 60W per port with Intelligent functionality such as powering and connecting Dahua IP PTZ cameras, thin clients, laptops and AIO Touch PCs.

8 POE-172 SINGLE PORT 802.3AT ULTRA POE INJECTOR (60W) WITH INTERNAL POWER Application: Cost effective standalone Ultra injector. Specify it to power single devices. The POE-172 injects up to 60W of power into the CAT cable to power devices (802.3AT compliant). This could be to provide power to a single Dahua IP CCTV camera, a Ruckus wireless access point, or any other device which can t easily be powered locally. 60W 10M/100M 1000M Plug & Play WALL Mountable IPOE-E174 IP30 SINGLE PORT 60W ULTRA POE TO 4-PORT 802.3AF/AT GIGABIT POE EXTENDER (-40 TO 75 C) Application: 4-way Ultra splitter. Specify it for extended range applications to split 1x Ultra input to 4x ports with 50W each. With Gigabit connection speeds and additional power you can double the limits of CAT to 200m whilst still powering devices. It s also IP30 rated making it the ideal solution for hostile environments such as gate houses to power and connect access control systems / remote Dahua IP CCTV cameras, etc. 75 C -40 C 60W End-span DIN RAIL IP Code (0)