datasheets Put HP ProCurve Switches and Hubs to Work for You HP Proactive Networking does more for you so you can get more out of your network:

Transcription

1 datasheets HP ProCurve Switches & Hubs Put HP ProCurve Switches and Hubs to Work for You HP Proactive Networking does more for you so you can get more out of your network: Get the best of both worlds in your network: HP quality at industry-leading prices Manage the bandwidth you have by building a network with the Class of Service features that deliver the Quality of Service your organization needs. With HP ProCurve switches and hubs, your network is ready to take advantage of policy-based network management. Build all the additional bandwidth you want with the scalable HP ProCurve product line 10Mbps to 100Mbps to Gigabit and beyond using trunking, meshing, and Cisco Fast EtherChannel technology. Prepare for the Year 2000 with network products that are Year 2000 compliant (see page 3 for imant Y2K information). Build networks that sup voice, video, and data traffic: HP ProCurve switches and hubs are convergence-ready. Build high-availability and high-performance data centers and backbones. Extend high-availability to the desktop. Less Work, More Network

2 Contents HP Proactive Networking Overview PAGE 3 Networking Management Software HP TopTools PAGE 4 Backbone Desktop Office HP ProCurve Routing Switch 9308M 10/100/Gigabit managed modular routing switch; 8 open module slots for up to 64 Gigabit or /100Base-TX or a combination PAGE 6 HP ProCurve Switch 4000M 10/100/Gigabit managed switch; 40 10/100Base-TX autosensing installed; 5 open module slots PAGE 9 HP ProCurve 10/100 Hub 24M and Hub 12M 24- and 12- managed 10/100Base-TX autosensing hubs PAGE 15 HP ProCurve 100Base-T Hub 8 Compact 8- unmanaged 100Base-TX hub; extremely cost-effective PAGE 16 HP ProCurve Routing Switch 9304M 10/100/Gigabit managed modular routing switch; 4 open module slots for up to 32 Gigabit or 96 10/100Base-TX or a combination PAGE 7 HP ProCurve Switch 2424M 24- managed 10/100Base-TX autosensing switch; one open module slot for Gigabit stacking/uplinks PAGE 10 HP ProCurve 10/100 Hub 24 and Hub and 12- unmanaged 10/100Base-TX autosensing hubs PAGE 15 HP ProCurve 10Base-T Hub 8 Compact 8- unmanaged 10Base-T hub; extremely cost-effective PAGE 16 HP ProCurve Switch 8000M 10/100/Gigabit managed modular switch; 10 open module slots PAGE 8 HP ProCurve Switch unmanaged 10/100Base-TX autosensing switch; one open transceiver slot for optional 100Base-FX uplink PAGE 11 HP ProCurve 10Base-T Hub 24M and Hub 12M 24- and 12- managed 10Base-T hubs; one open transceiver slot PAGE 17 HP AdvanceStack 10Base-T Hub 16U 16-10Base-T hub; upgradeable to SNMP management; one open transceiver slot PAGE 19 HP ProCurve Switch 1600M 16- managed 10/100/Gigabit switch; one open module slot PAGE 13 HP ProCurve Switch 224M 24- managed 10Base-T switch; with 100Base-T uplinks PAGE 14 HP ProCurve 10Base-T Hub 24 and Hub and 12- unmanaged 10Base-T hubs; one open transceiver slot PAGE 17 HP AdvanceStack 10Base-T Hub 8U 8-10Base-T hub; upgradeable to SNMP management; one open transceiver slot PAGE 19 HP AdvanceStack Switch 2000 FDDI, 100VG, and ATM connectivity HP AdvanceStack Switch 800T 8- managed 10/100Base-TX switch; media-flexible PAGE 12 HP ProCurve Switch 212M 12- managed 10Base-T switch; with 100Base-T uplinks PAGE 14 HP AdvanceStack 10BT Switching Hubs 24- and 12- stackable 10Base-T hubs; optional modules for switching and management PAGE 18 HP AdvanceStack 10Base-T Hub 8E Compact 8- unmanaged 10Base-T hub; includes BNC connector PAGE PAGE 20 2

3 Maximum,, and for Your Network The HP ProCurve Product Line Delivers HP Proactive Networking: Lifetime 1 warranty for as long as you own the product with free nextbusiness-day advance replacement (where available) HP SupPack offers low-cost upgrades to same-day onsite warranty coverage Year 2000 compliant 2 Free HP Customer Care By Phone and Web and sup Easy plug-and-play installation LED display for at-a-glance monitoring and troubleshooting Scalable solutions from 10Mbps to 100Mbps to Gigabit Legendary HP quality and reliability backed by HP Customer Care award-winning service and sup HP ProCurve Managed Products Deliver: Free HP TopTools for Hubs & Switches effective, easy-to-use network management software Web interface lets you monitor your whole network at once up to 1,500 segments simultaneously from any PC on the network with a Web browser Automatic performance and upgrade recommendations provided in clear, easy-to-follow language and diagrams Find-Fix-Inform capability keeps common topology, wiring, and traffic problems from affecting the network For the Life of Your Network For your ultimate peace of mind, HP switches and hubs come with a lifetime 1 warranty for as long as you own it, plus free HP Customer Care By Phone, Web, and sup. Our advance-replacement warranty provides fast recovery from a failure. We ll ship you a replacement unit immediately, so you ll be up and running the next business day. It s all part of HP s awardwinning Customer Care service and sup. (In some countries, next-business-day advance replacement is not available; please check with your local reseller or HP for more information.) And if you want your network to live past 1999, you ll be glad to know that every HP switch and hub is fully Year 2000 compliant. 2 Check what our competitors say about their warranties you ll find that none of them has as much confidence in their products as HP. Also check their Year 2000 readiness. 1 HP ProCurve 9300 series products have a 1-year warranty with extensions available. 2 HP has made every effort to ensure the accuracy of our product testing. However, because each customer s environment is different from HP s laboratory test environment, it is the customer s responsibility to validate the Year 2000 readiness of these products in their own environment. Therefore, information about the Year 2000 status of HP products is provided as is without warranties of any kind and is subject to change without notice. HP makes no representations or warranty respecting the accuracy or reliability of information about non-hp products. Such information, if any, was provided by the manufacturers of those products and customers are urged to contact the manufacturer directly to verify Year 2000 readiness. The information provided here constitutes a Year 2000 Readiness Disclosure for purposes of the Year 2000 Information and Readiness Disclosure Act. 3

4 HP TopTools HP TopTools is a free, Web-based device-management solution that sets a new standard in managing all standards-based devices across your network, including PC clients, servers, printers, switches, and hubs. HP TopTools Features and Benefits Ease of use Manage clients, servers, switches, and hubs from a single application Choice Runs on its own or with popular Microsoft Windows NT management platforms like HP OpenView NNM, CA Unicenter TNG, Tivoli NetView, and Tivoli Enterprise Flexibility Web interface lets you manage devices from anywhere on the network with a Web browser For more details, visit HP OpenView The goal of the HP OpenView program is to provide management solutions that help IT operate as a highly valued strategic asset to the business. These solutions are designed to help IT organizations commit to the definition of, and management to service level agreements; to deploy business services throughout the distributed environment to empowered end users; and finally, to operate the technology to keep business services up and running and perform reliably. The HP OpenView family of products represents the most complete approach to providing new and better IT service management. For more details, visit HP NetMetrix HP NetMetrix delivers crucial internetwork monitoring and analysis measurement and reing information to help paint a clear operational picture of the network environment for IT, upper management, and users. When integrated within HP OpenView, NetMetrix permits IT to respond to service management strategies with an integrated set of applications that interpret, consolidate, and organize substantial network data into readable, effective display and re graphics and tables so you can take appropriate action. For more details, visit HP Internet Advisor The Internet Advisor is the world s leading data communications test tool one that gives you the ability to test LANs, WANs, and network interconnections. It connects to virtually any network environment, captures all the data necessary to get true network visibility, comprehend network behavior with expert analysis that reveals problems and suggests solutions. For more details, visit and search on Internet Advisor 4

5 HP TopTools for Hubs & Switches (J2569N) Easy to install and use, HP TopTools for Hubs & Switches is the answer to your network management challenges. The Web interface lets you take care of management from any PC on your network with a Web browser. For managing devices, troubleshooting, or planning network upgrades, HP TopTools for Hubs & Switches takes the work out of network management. Managing Network Devices You ll spend less time and effort on day-to-day network tasks with HP TopTools for Hubs & Switches working for you: Easy management from anywhere on your Intranet with a Web browser Automatic notification when HP switches and hubs use proactive features to fix or limit common network problems Automatic management of up to 1,500 devices for maximum performance* Managing Network Traffic Seeing your entire network at once and troubleshooting problems couldn t be easier: Simultaneously shows the traffic on up to 1,500 segments without the use of probes Monitors all server connections Shows top five conversations on every segment, including Gigabit Managing Network Growth Let HP TopTools for Hubs & Switches take the hassle out of upgrading your network: Automatically monitors, stores, and analyzes network traffic to determine where upgrades are needed As unbelievable as it seems, Network Advisor gives clear, easy-to-follow plans detailing the most cost-effective way to upgrade your network Recommends server placement and connectivity speed HP TopTools Software Bridges You can get the advantages of HP TopTools for Hubs & Switches consistent, easy-to-use interface from industry-standard Microsoft Windows NT networkmanagement platforms with an HP TopTools software bridge. Bridges can be purchased from your HP dealer. HP TopTools for OpenView NNM-NT HP TopTools for Unicenter TNG (Computer Associates) HP TopTools for Tivoli Enterprise v1.0 (IBM) HP TopTools for Tivoli NetView (IBM) HP s remarkable Network Advisor automatically generates easy-to-follow plans that detail the most cost-effective way to upgrade your network. It s like having a network expert working for you. Web-based interface makes it easy to take care of management tasks anytime, anywhere from any PC on the network. HP Hub and Switch Management for OV-UX (J3250N) HP Hub and Switch Management for OV-UX enhances managed HP networking devices and lets you monitor, configure, and troubleshoot HP devices in a fully scalable, multivendor environment on the HP OpenView Network Node Manager UX platform. It lets you quickly install, configure, and monitor devices with a Web browser. * HP TopTools Value Pak is now available for networks with greater than 1,500 nodes. HP TopTools Value Pak (part number D7118A) is available through your HP dealer and includes an expanded database for sup of multiple departments or workgroups. 5

6 HP ProCurve Routing Switch 9308M A feature-rich, managed modular routing switch delivering 100 million pps performance. The HP ProCurve Routing Switch 9308M provides up to 64 Gigabit Ethernet or up to 192 autosensing 10/100Base-TX or a mixed combination. It is ideal for large networks, and provides high performance in collapsed backbone data centers. IP/IPX/Appletalk routing: prevents flooding of broadcast traffic on the network without performance degradation IP multicast (IGMP, DVMRP, and PIM) routing: prevents flooding of multicast video traffic Policy-based VLANs: allows you to assign VLANs on a, protocol, subnet, or IEEE 802.1Q tagged basis Hardware-based Access List: ensures high level of security without impacting network performance Filter-based enhanced security: provided on the basis of IP source and destination address, protocol type, number, and MAC address Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser Industry-leading warranty: one year with extensions available Optional redundant power supply: provides uninterrupted power for high availability Hot-swappable chassis modules: allow you to swap modules without interrupting the network Automatic switch failover: provides switch-level redundancy with VRRP sup 100 million pps performance: provides high performance required by large networks Layer 4 prioritization: delivers QoS for applications Port trunking: for higher switch-to-switch throughput and link-level redundancy HP ProCurve Routing Switch 9308M (J4138A) With 8 open module slots for up to 64 Gigabit Ethernet or up to 192 autosensing 10/100Base- TX or a mixed combination HP ProCurve /100 Module (J4140A) HP ProCurve /100 Mgmt. Module (J4141A) HP ProCurve Base-FX Module (J4142A) HP ProCurve 9300 Gigabit-SX Module (J4143A) HP ProCurve 9300 Gigabit-SX Mgmt. Module (J4144A) HP ProCurve 9300 Gigabit-LX/SX Module (J4145A) HP ProCurve 9300 Gigabit-LX/SX Mgmt Module (J4146A) HP ProCurve 9300 Redundant Power Supply (J4147A) For accessory information, including counts, IEEE specs, and compatibility, see pages open module slots Dimensions: 52.7 x 44.4 x 38.7 cm (20.75 x 17.5 x in) Weight: 26.0 kg (57.3 lb) Memory & Processor Packet buffer size: 4 MB per module RAM/ROM capacity: 32 MB per module Processor type & speed: Motorola PowerPC 240 MHz Flash capacity: 4 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) RFC 1493 Bridge MIB Ethernet MIB Repeater MIB Ethernet Interface MIB Latency: <7µs (FIFO) Throughput: 100 million pps (64-byte packets) Switching capacity: 256 Gbps Address table size: 64,000 entries Temperature: 5 C to 40 C (41 F to 104 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 100 BTU/hr (chassis); 300 BTU/hr (module) Maximum wattage: 30W (chassis); 100W (module) Current: 5.5A/2.5A Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow ; RFC 1075 DVMRP; RFC 1583 OSPF; PIM dense mode; RFC 1112 IGMP; RFC 2338 VRRP; RFC 1058 RIP; RFC 1723 RIPv2 EN 60950/IEC 950; UL 1950; CSA 950 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC ; 4 kv CD, 8 kv AD Radiated: IEC ; 3 V/m EFT/Burst: IEC ; 1.0 kv (power line), Conducted: IEC ; 3V 6

7 HP ProCurve Routing Switch 9304M A feature-rich, managed modular routing switch delivering 50 million pps performance. The HP ProCurve Routing Switch 9304M provides up to 32 Gigabit Ethernet or up to 96 autosensing 10/100Base-TX or a mixed combination. It is ideal for medium-to-large networks, and provides high performance in collapsed backbone data centers. IP/IPX/Appletalk routing: prevents flooding of broadcast traffic on the network without performance degradation IP multicast (IGMP, DVMRP, and PIM) routing: prevents flooding of multicast video traffic Policy-based VLANs: allows you to assign VLANs on a, protocol, subnet, or IEEE 802.1Q tagged basis Hardware-based Access List: ensures high level of security without impacting network performance Filter-based enhanced security: provided on the basis of IP source and destination address, protocol type, number, and MAC address Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser Industry-leading warranty: one year with extensions available Optional redundant power supply: provides uninterrupted power for high availability Hot-swappable chassis modules: allow you to swap modules without interrupting the network Automatic switch failover: provides switch-level redundancy with VRRP sup HP ProCurve Routing Switch 9304M (J4139A) With 4 open module slots for up to 32 Gigabit Ethernet or up to 96 autosensing 10/100Base- TX or a mixed combination HP ProCurve /100 Module (J4140A) HP ProCurve /100 Mgmt. Module (J4141A) HP ProCurve Base-FX Module (J4142A) HP ProCurve 9300 Gigabit-SX Module (J4143A) HP ProCurve 9300 Gigabit-SX Mgmt. Module (J4144A) HP ProCurve 9300 Gigabit-LX/SX Module (J4145A) HP ProCurve 9300 Gigabit-LX/SX Mgmt Module (J4146A) HP ProCurve 9300 Redundant Power Supply (J4147A) For accessory information, including counts, IEEE specs, and compatibility, see pages million pps performance: provides high performance required by medium-to-large networks Layer 4 prioritization: delivers QoS for applications Port trunking: for higher switch-to-switch throughput and link-level redundancy 4 open module slots Dimensions: 22.8 x 44.4 x 38.1 cm (9 x 17.5 x 15 in) Weight: 13.8 kg (30.4 lb) Memory & Processor Packet buffer size: 4 MB per module RAM/ROM capacity: 32 MB per module Processor type & speed: Motorola PowerPC 240 MHz Flash capacity: 4 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) RFC 1493 Bridge MIB Ethernet MIB Repeater MIB Ethernet Interface MIB Latency: <7µs (FIFO) Throughput: 50 million pps (64-byte packets) Switching capacity: 128 Gbps Address table size: 64,000 entries Temperature: 5 C to 40 C (41 F to 104 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 70 BTU/hr (chassis); 300 BTU/hr (module) Maximum wattage: 20W (chassis); 100W (module) Current: 5.5A/2.5A Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow ; RFC 1075 DVMRP; RFC 1583 OSPF; PIM-dense mode; RFC 1112 IGMP; RFC 2338 VRRP; RFC 1058 RIP; RFC 1723 RIPv2 EN 60950/IEC 950; UL 1950; CSA 950 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC ; 4 kv CD, 8 kv AD Radiated: IEC ; 3 V/m EFT/Burst: IEC ; 1.0 kv (power line), Conducted: IEC ; 3V 7

8 HP ProCurve Switch 8000M A feature-rich managed modular 10/100/Gigabit switch for high density and media flexibility. All the benefits of HP Proactive Networking make the HP ProCurve Switch 8000M the easiest way to build a high-availability backbone for maximum uptime. 10/100 autosensing per (with optional 10/100Base-TX module): connect any 10Base-T or 100Base-TX device and it works RMON and extended RMON: provide advanced monitoring capabilities Port monitoring: lets you monitor traffic using a switched so you can view several at one time with an RMON probe Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser Layer 3 protocol filtering: provides traffic control VLAN tagging: provides multiple VLANs over the same physical link VLAN sup: provides security between workgroups Priority queuing: for Class of Service (CoS) control of applications IP multicast (IGMP): prevents flooding of multicast video traffic Switch meshing: delivers high availability with high performance Hot swappable modules: allows you to swap modules without interrupting the network Optional redundant power supply: provides uninterrupted power Spanning Tree protocol: prevents network loops Redundant fans: provide uninterrupted cooling Lifetime warranty: for as long as you own the product HP ProCurve Switch 8000M (J4110A) With 10 open module slots (Shown with optional HP ProCurve Switch modules installed) HP ProCurve Switch 10/100Base-T Module (J4111A) HP ProCurve Switch 100Base-FX Module (J4112A) HP ProCurve Switch Gigabit-SX Module (J4113A) HP ProCurve Switch Gigabit-LX Module (J4114A) HP ProCurve Switch 10Base-FL Module (J4118A) HP ProCurve Switch 4000M/8000M Redundant Power Supply (J4119A) A 1000Base-T Module will be available in 1999; contact your HP dealer for availability For accessory information, including counts, IEEE specs, and compatibility, see pages Port trunking: for higher switch-to-switch throughput and link-level redundancy Cisco Fast EtherChannel : provides higher throughput to other devices that sup FEC Automatic Broadcast (ABC): minimizes IP and IPX broadcast traffic throughout the network 10 open module slots One RS-232C DB-9 console Dimensions: 44.2 x 33.5 x 17.8 cm (17.4 x 13.2 x 7 in) Weight: 9.4 kg (20.7 lb) Memory & Processor Packet buffer size: 512 KB per (10/100 ); 2 MB per (Gigabit ) RAM/ROM capacity: 16 MB Processor type & speed: Intel 66 MHz Flash capacity: 2 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: <10µs (LIFO) Throughput: 4.67 million pps (64-byte packets) Backplane speed: 3.8 Gbps Address table size: 10,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 535 BTU/hr Maximum wattage: 157W Current: 2.0A max/1.0a max Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 8

9 HP ProCurve Switch 4000M A managed modular 10/100/Gigabit desktop switch that provides scalable, lowcost switching and all the benefits of HP Proactive Networking. It is ideal for organizations looking for scalable, expandable, low-cost migration to 10/100/Gigabit switching to the desktop. 10/100 autosensing per : connect any 10Base-T or 100Base-TX device and it works RMON and extended RMON: provide advanced monitoring capabilities Port monitoring: lets you monitor traffic using a switched so you can view several at one time with an RMON probe Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser VLAN tagging: provides multiple VLANs over the same physical link VLAN sup: provides security between workgroups Priority queuing: for Class of Service (CoS) control of applications IP multicast (IGMP): prevents flooding of multicast video traffic Hot swappable modules: allows you to swap modules without interrupting the network Optional redundant power supply: provides uninterrupted power Redundant fans: provide uninterrupted cooling Spanning Tree protocol: prevents network loops Lifetime warranty: for as long as you own the product HP ProCurve Switch 4000M (J4121A) With 40 10/100Base-TX installed and 5 open module slots HP ProCurve Switch 10/100Base-T Module (J4111A) HP ProCurve Switch 100Base-FX Module (J4112A) HP ProCurve Switch Gigabit-SX Module (J4113A) HP ProCurve Switch Gigabit-LX Module (J4114A) HP ProCurve Switch 10Base-FL Module (J4118A) HP ProCurve Switch 4000M/8000M Redundant Power Supply (J4119A) A 1000Base-T Module will be available in 1999; contact your HP dealer for availability For accessory information, including counts, IEEE specs, and compatibility, see pages Gigabit uplinks: provide high-speed links to switches, servers, and backbones (with an optional Gigabit module installed) Port trunking: for higher switch-to-switch throughput and link-level redundancy Half/Full duplex auto-negotiation capability on every : doubles the throughput to each device 40 RJ-45 10/100Base-TX (IEEE Type 10Base-T; 802.3u Type 100Base-TX) 5 open module slots One RS-232C DB-9 console Dimensions: 44.2 x 33.5 x 17.8 cm (17.4 x 13.2 x 7 in) Weight: 10.4 kg (22.9 lb) Memory & Processor Packet buffer size: 512 KB per (10/100 ); 2 MB per (Gigabit ) RAM/ROM capacity: 10 MB Processor type & speed: Intel 66 MHz Flash capacity: 2 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: <10µs (LIFO) Throughput: 4.67 million pps (64-byte packets) Backplane speed: 3.8 Gbps Address table size: 10,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 535 BTU/hr Maximum wattage: 157W Current: 2.0A max/1.0a max Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 9

10 HP ProCurve Switch 2424M A low cost, managed 24-, expandable 10/100 Ethernet desktop switch. The HP ProCurve Switch 2424M includes one open module slot for Gigabit stacking and uplinks. It is ideal for low-cost migration to 10/100 stackable switching. 10/100 autosensing per : connect any 10Base-T or 100Base-TX device and it works Priority queuing: for Class of Service (CoS) control of applications VLAN tagging: provides multiple VLANs over the same physical link VLAN sup: provides security between workgroups Port monitoring: lets you monitor traffic using a switched so you can view several at one time with an RMON probe Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser Stackable: switches stack without taking up any usable (with optional HP ProCurve Switch 2424M Gigabit Stacking Module) IP multicast (IGMP): prevents flooding of multicast video traffic Hot swappable modules: allow you to swap modules without interrupting the network Lifetime warranty: for as long as you own the product HP ProCurve Switch 2424M (J4093A) With 24 10/100Base-TX autosensing and 1 open module slot on the back HP ProCurve Switch 2424M Gigabit Stacking Module (J4130A) HP ProCurve Switch 10/100Base-T Module (J4111A) HP ProCurve Switch 100Base-FX Module (J4112A) HP ProCurve Switch Gigabit-SX Module (J4113A) HP ProCurve Switch Gigabit-LX Module (J4114A) HP ProCurve Switch 10Base-FL Module (J4118A) A 1000Base-T Module will be available in 1999; contact your HP dealer for availability For accessory information, including counts, IEEE specs, and compatibility, see pages Gigabit uplinks: provide high-speed links to switches, servers, and backbones (with an optional Gigabit module installed) Port trunking: for higher switch-to-switch throughput and link-level redundancy Half/Full duplex auto-negotiation capability on every : doubles the throughput to each device 24 RJ-45 10/100Base-TX (IEEE Type 10Base-T; 802.3u Type 100Base-TX) One open module slot One RS-232C DB-9 console Dimensions: 44.2 x 33.5 x 6.6 cm (17.4 x 13.2 x 2.6 in) Weight: 4.7 kg (10.4 lb) Memory & Processor Packet buffer size: 65 KB per RAM/ROM capacity: 10 MB Processor type & speed: Intel 40 MHz Flash capacity: 2 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: <10µs (LIFO) Throughput: 4.67 million pps (64-byte packets) Backplane speed: 3.2 Gbps Address table size: 10,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 358 BTU/hr Maximum wattage: 105W Current: 2.0A max/1.0a max Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 10

11 HP ProCurve Switch 2224 A low-cost, unmanaged 24- switch with 10/100 autosensing per. It is ideal for delivering powerful performance to workgroups with a mix of 10Mbps and 100Mbps devices and for migrating from 10Base-T to 100Base-TX. 10/100 autosensing per : connect any 10Base-T or 100Base-TX device and it works Flow : ensures reliable communication during full-duplex operation Comprehensive LED display with per- indicators: provides an at-a-glance view of status, activity, speed, and full-duplex operation Lifetime warranty: for as long as you own the product HP ProCurve Switch 2224 (J4095A) With 24 10/100Base-TX autosensing and 1 open transceiver slot HP AdvanceStack 100Base-FX Transceiver Module (J3193B) For accessory information, including counts, IEEE specs, and compatibility, see pages Half/full duplex auto-negotiating capability on every : double the throughput to each device, up to 200Mbps 24 RJ-45 10/100Base-TX (IEEE Type 10Base-T; 802.3u Type 100Base-TX) One open transceiver slot (transceiver replaces 1) Dimensions: 44.2 x 33.3 x 6.6 cm (17.4 x 13.1 x 2.6 in) Weight: 4.2 kg (9.3 lb) Memory & Processor Packet buffer size: 126 KB per RAM/ROM capacity: 6 MB Mounts in a standard 19-in rack (hardware included) Latency: <10µs (LIFO) Throughput: 2.1 million pps (64-byte packets) Backplane speed: 2.4 Gbps Address table size: 12,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 154 BTU/hr Maximum wattage: 45W Current: 1.0A max/0.5a max Communications IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC ; 4 kv CD, 8 kv AD Radiated: IEC ; 3 V/m EFT/Burst: IEC ; 1.0 kv (power line), Conducted: IEC ; 3V 11

12 HP AdvanceStack Switch 2000 and 800T The HP AdvanceStack Switch 2000 is a managed modular switch that offers a wide range of media connectivity options. It is ideal for improving performance within existing networks and connecting to FDDI, 100VG, and ATM. The HP AdvanceStack Switch 800T is an 8- managed 100Base-T switch that provides media flexibility. IP multicast (IGMP): prevents flooding of multicast video traffic RMON and extended RMON: provide advanced monitoring capabilities Port monitoring: lets you monitor traffic using a switched so you can view several at one time with an RMON probe Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser Port-based VLANs and /MAC/multicast protocol filtering: for intrusion protection Hot swappable modules: allow you to swap modules without interrupting the network (Switch 2000 only) Optional redundant power supply: provides constant power Lifetime warranty: for as long as you own the product HP AdvanceStack Switch 2000 (J3100B) With 6 open module slots (shown with all optional HP AdvanceStack Switch modules installed) HP AdvanceStack Switch 2000 Ethernet Module (J3102A) HP AdvanceStack Switch VG Module (J3103A) HP AdvanceStack Switch 2000 FDDI Module (J3108A) HP AdvanceStack Switch Base-FL Module (J3109A) HP AdvanceStack Switch Base-T Module (J3191A) HP AdvanceStack Switch 2000 ATM Module (J3246A) HP AdvanceStack Switch 2000 Redundant Power Supply (J3136A) Port trunking: for higher switch-to-switch throughput and link-level redundancy Automatic Broadcast (ABC): minimizes IP and IPX broadcast traffic throughout the network HP AdvanceStack Switch 800T (J3245A) With 4 10/100Base-TX transceivers installed and 4 open transceiver slots HP AdvanceStack 100Base-TX UTP Transceiver (J3192C) HP AdvanceStack 100Base-FX Fiber-optic Transceiver (J3193B) HP AdvanceStack Redundant Power Supply (J2962A) For accessory information, including counts, IEEE specs, and compatibility, see pages Switch 2000: Six open module slots One RS-232C DB-9 console Switch 800T: 4 10/100Base-TX transceiver-based (IEEE 802.3u Type 100Base-TX) 4 open transceiver slots One RS-232C DB-9 console Dimensions: Switch 2000: 44.0 x 30.0 x 17.8 cm (17.3 x 11.8 x 7 in) Switch 800T: 44.2 x 30.0 x 6.6 cm (17.4 x 11.8 x 2.6 in) Weight: Switch 2000: 9.1 kg (20.0 lb) Switch 800T: 4.5 kg (9.9 lb) Memory & Processor Packet buffer size: 512 KB per (100Mbps ); 256 KB per (10Mbps ) RAM/ROM capacity: 8 MB Processor type & speed: Intel 25 MHz Flash capacity: 1 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: <10µs (LIFO) Throughput: 1.0 million pps (Switch 2000); 1.19 million pps (Switch 800T) (both: 64-byte packets) Backplane speed: 1.0 Gbps Address table size: 10,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 290 BTU/hr (Switch 2000); 229 BTU/hr (Switch 800T) Maximum wattage: 85W (Switch 2000); 67W (Switch 800T) Current: 2.5A max/1.5a max (Switch 2000); 1.5A max/0.75a max (Switch 800T) Communications IEEE 802.1D Spanning Tree EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line),

13 HP ProCurve Switch 1600M A managed 10/100/Gigabit switch that offers reliable connectivity and high availability features. 10/100 autosensing per : connect any 10Base-T or 100Base-TX device and it works RMON and extended RMON: provide advanced monitoring capabilities Port monitoring: lets you monitor traffic using a switched so you can view several at one time with an RMON probe Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser VLAN tagging: provides multiple VLANs over the same physical link VLAN sup: provides security between workgroups Layer 3 protocol filtering: provides traffic control Priority queuing: for Class of Service (CoS) control of applications IP multicast (IGMP): prevents flooding of multicast video traffic Switch meshing: delivers high availability with high performance Hot swappable modules: allows you to swap modules without interrupting the network Spanning Tree protocol: prevents network loops Lifetime warranty: for as long as you own the product HP ProCurve Switch 1600M (J4120A) With 16 10/100Base-TX autosensing and 1 open module slot (shown with the optional Gigabit-SX module installed) HP ProCurve Switch 10/100Base-T Module (J4111A) HP ProCurve Switch 100Base-FX Module (J4112A) HP ProCurve Switch Gigabit-SX Module (J4113A) HP ProCurve Switch Gigabit-LX Module (J4114A) HP ProCurve Switch 10Base-FL Module (J4118A) A 1000Base-T Module will be available in 1999; contact your HP dealer for availability For accessory information, including counts, IEEE specs, and compatibility, see pages Port trunking: for higher switch-to-switch throughput and link-level redundancy Cisco Fast EtherChannel : provides higher throughput to other devices which sup FEC Automatic Broadcast (ABC): minimizes IP and IPX broadcast traffic throughout the network 16 RJ-45 autosensing 10/100Base-TX (IEEE Type 10Base-T; IEEE 802.3u Type 100Base-TX) One open module slot One RS-232C DB-9 console Dimensions: 44.2 x 33.5 x 6.6 cm (17.4 x 13.2 x 2.6 in) Weight: 4.5 kg (9.9 lb) Memory & Processor Packet buffer size: 8 MB (10/100 ); 2 MB per (Gigabit ) RAM/ROM capacity: 12 MB Processor type & speed: Intel 66 MHz Flash capacity: 2 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: 8µs (LIFO) Throughput: 3.87 million pps (64-byte packets) Backplane speed: 3.5 Gbps Address table size: 10,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 154 BTU/hr Maximum wattage: 45W Current: 1.0A max/0.6a max Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 13

14 HP ProCurve Switch 224M and 212M The HP ProCurve Switch 224M and 212M are economical managed solutions for providing low-cost dedicated 10Mbps Ethernet switching performance to the desktop with high-speed 100Mbps connections to a server or network data center. Port monitoring: lets you monitor the entire network (one at a time) with an RMON probe on only one IP multicast (IGMP): prevents flooding of multicast video traffic HP ProCurve Switch 224M (J3299A) With 24 10Base-T, 1 autosensing 10/100Base-TX, and 1 open transceiver slot to add an additional 10/100Base-TX or a 100Base-FX (shown with optional transceiver module installed) Lifetime warranty: for as long as you own the product Broadcast storm control: minimizes the impact of broadcast storms on your network Two 100Base-T : for high-speed server connection or uplink Full duplex on all : for maximum performance Functions as a workgroup switch: segments 10Mbps hubs, cutting down on collisions and increasing the performance of the shared network HP ProCurve Switch 212M (J3298A) With 12 10Base-T, 1 autosensing 10/100Base-TX, and 1 open transceiver slot to add an additional 10/100Base-TX or a 100Base-FX (shown with optional transceiver module installed) HP AdvanceStack 10/100Base-TX UTP Transceiver (J3192C) HP AdvanceStack 100Base-FX Fiber-Optic Transceiver (J3193B) For accessory information, including counts, IEEE specs, and compatibility, see pages Switch 224M: 24 RJ-45 10Base-T (IEEE Type 10Base-T) Switch 212M: 12 RJ-45 10Base-T (IEEE Type 10Base-T) Both: One RJ-45 autosensing 10/100Base-TX (IEEE Type 10Base-T; IEEE 802.3u Type 100Base-TX), one open transceiver slot and one RS-232C DB-9 console Dimensions: 42.5 x 23.8 x 4.4 cm (16.7 x 9.4 x 1.7 in) Weight: 2.2 kg (4.8 lb) Memory & Processor Packet buffer size: 4 MB (224M); 2 MB (212M) RAM/ROM capacity: 2 MB Processor type & speed: Motorola ColdFire 25 MHz Flash capacity: 1 MB Mounts in a standard 19-in rack (hardware included) Management HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 1493 Bridge MIB Latency: 15.3µs (LIFO) Throughput: 476,192 pps (212M) (64-byte packets) Backplane speed: 3.2 Gbps Address table size: 8,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 119 BTU/hr Maximum wattage: 35W Current: 1.0A max/0.5a max Communications IEEE 802.1p Priority; IEEE 802.1D Spanning Tree; IEEE 802.1Q VLANs; IEEE 802.3x Flow EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 14

15 HP ProCurve Autosensing 10/100 Hubs Low-cost, 24- and 12- hubs with 10/100 per- autosensing and a built-in bridge. The Hub 24M and Hub 12M also offer built-in management. These hubs are ideal for connecting workgroups with a mix of 10Mbps and 100Mbps devices as well as for any workgroup that is migrating from 10Base-T to 100Base-TX. 10/100 autosensing per : connect any 10Base-T or 100Base-TX device and it works RMON and extended RMON: provide advanced monitoring capabilities (Hub 24M and Hub 12M) Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser (Hub 24M and Hub 12M) MDI/MDI-X cascade : makes it easy to add other hubs to the network Automatic cable sense: monitors cable quality and sets to the highest reliable speed (Hub 24M and Hub 12M) HP ProCurve 10/100 Hub 24M (J3289A) With 24 autosensing 10/100Base-TX and built-in management HP ProCurve 10/100 Hub 12M (J3288A) With 12 autosensing 10/100Base-TX and built-in management HP ProCurve 10/100 Hub 24 (J3295A) With 24 autosensing 10/100Base-TX Comprehensive LED display with per- indicators: provides an at-a-glance view of status, activity and speed Automatic polarity correction and auto-partitioning on all : helps find and fix common network problems Lifetime warranty: for as long as you own the product HP ProCurve 10/100 Hub 12 (J3294A) With 12 autosensing 10/100Base-TX Built-in bridge: automatically connects 10Mbps and 100Mbps devices without requiring additional products, modules, or stacking to operate correctly Hub 24M & Hub 24: 24 RJ-45 10/100Base-TX (IEEE Type 10Base-T; 802.3u Type 100Base-TX Class II) Hub 12M & Hub 12: 12 RJ-45 10/100Base-TX (IEEE Type 10Base-T; 802.3u Type 100Base-TX Class II) Hub 24M & Hub 12M: one RS-232C DB-9 console ; 1 is MDI/MDI-X Dimensions: 44.2 x 19.7 x 4.4 cm (17.4 x 7.8 x 1.7 in) Weight: 2.2 kg (4.8 lb) Memory & Processor (Hub 24M & Hub 12M) RAM/ROM capacity: 2 MB Processor type & speed: Motorola 50 MHz Flash capacity: 500 KB Mounts in a standard 19-in rack (hardware included) Management (Hub 24M & Hub 12M) HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events) Extended RMON RFC 2108 Repeater MIB Latency: 1.6µs (FIFO) Address table size: 8,000 entries Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 55 BTU/hr Maximum wattage: 35W Current: 1.0A max/0.5a max EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 15

16 HP ProCurve Compact 8-Port Hubs Compact, unmanaged hubs provide HP reliability and performance at an aggressive price. Ideal as a simple, low-cost way to create a new 10Base-T or 100Base-TX network or to expand an existing one. It meets Class B emissions standards for use in home and residential environments. HP ProCurve 100Base-T Hub 8 (J4091A) With 8 100Base-TX MDI/MDI-X cascade : makes it easy to add other hubs to the network Optional four-way mounting kit: allows multiple mounting configurations on a flat surface, side-by-side, and in a standard rack Comprehensive LED display with per- indicators: provides at-a-glance view of status, activity, and utilization Automatic polarity correction and auto-partitioning on all : helps find and fix common network problems Lifetime warranty: for as long as you own the product HP ProCurve 10Base-T Hub 8 (J4090A) With 8 10Base-T Kit ( ) For accessory information, including counts, IEEE specs, and compatibility, see pages Industry-standard 10Base-T or 100Base-TX: connect at the speed you need 100Base-T Hub 8: 8 RJ Base-TX (IEEE 802.3u Type 100Base-TX Class II) 10Base-T Hub 8: 8 RJ-45 10Base-T (IEEE Type 10Base-T) Both: Port 8 is either MDI or MDI-X. Dimensions: 19.9 x 12.1 x 4.0 cm (7.8 x 4.8 x 1.6 in) Weight: 0.7 kg (1.5 lb) Mounts in a standard 19-in rack with optional four-way mounting kit (ordered separately) Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 52BTU/hr (100Base-T); 27BTU/hr (10Base-T) Maximum wattage: 15W (100Base-T); 8W (10Base-T) Voltage: VAC or VAC Current: 0.4A max/0.2a max (100Base-T); 0.2A max/0.1a max (10Base-T) EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A and B*; EN 55022/CISPR-22 Class A and B*; VCCI Class A and B* *verified Class B with shielded twisted-pair cables ESD: IEC ; 4 kv CD, 8 kv AD Radiated: IEC ; 3 V/m EFT/Burst: IEC ; 1.0 kv (power line), Conducted: IEC ; 3V 16

17 HP ProCurve 10Base-T Hubs Cost-effective 24- and 12-10Base-T hubs provide a simple, efficient way to build a new network or expand an existing one. The Hub 24M and Hub 12M also offer built-in management. MDI/MDI-X cascade : makes it easy to add other hubs to the network Complete workgroup security: including intruder prevention, auto disabling, alarm, and password protection (Hub 24M and Hub 12M) RMON and extended RMON: provides advanced monitoring capabilities (Hub 24M and Hub 12M) Lifetime warranty: for as long as you own the product HP ProCurve 10Base-T Hub 24M (J3303A) With 24 10Base-T, 1 open transceiver slot, and built-in management HP ProCurve 10Base-T Hub 12M (J3301A) With 12 10Base-T, 1 open transceiver slot, and built-in management HP ProCurve 10Base-T Hub 24 (J3302A) With 24 10Base-T and 1 open transceiver slot HP ProCurve 10Base-T Hub 12 (J3300A) With 12 10Base-T and 1 open transceiver slot HP AdvanceStack Fiber-Optic Transceiver (J2606A) HP AdvanceStack Twisted-Pair Transceiver (J2607A) HP AdvanceStack ThinLAN Transceiver (J2608A) HP AdvanceStack AUI Port Module (J2609A) For accessory information, including counts, IEEE specs, and compatibility, see pages Hub 24M & Hub 24: 24 RJ-45 10Base-T (IEEE Type 10Base-T) Hub 12M & Hub 12: 12 RJ-45 10Base-T (IEEE Type 10Base-T) Hub 24M & 12M: one RS-232C DB-9 console, one open transceiver slot; one is MDI/MDI-X Dimensions: 44.2 x 19.7 x 4.4 cm (17.4 x 7.8 x 1.7 in) Weight: 2.4 kg (5.3 lb) Memory & Processor (Hub 24M & Hub 12M) RAM/ROM capacity: 2 MB DRAM Processor type & speed: Intel 25 MHz Flash capacity: 512 KB Mounts in a standard 19-in rack (hardware included) Management (Hub 24M & Hub 12M) HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), 4 (host), 5 (host topn), 6 (matrix), 7 (filters), 8 (packet capture), and 9 (events) Extended RMON RFC 1368 Repeater MIB and MIB II Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), Heat dissipation/hour: 119 BTU/hr Maximum wattage: 35W Current: 0.5A max/0.3a max EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 17

18 HP AdvanceStack 10Base-T Switching Hubs Flexible 10Base-T hubs that are manageable and segmentable. Ideal for shared 10Mbps environments that are growing, with an expected need for additional bandwidth in the future. Stackable: stacking cable included for easy expansion without taking up usable Complete workgroup security: including intruder prevention, auto disabling, alarm, and password protection (with 10BT Management Pack installed) RMON and extended RMON: provides advanced monitoring capabilities (with 10BT Management Pack installed) Web interface: lets you monitor your whole network at once up to 1,500 segments from any PC on the network with a web browser (with 10BT Management Pack installed) Backup link: configuration of any as primary or backup link between hubs in the event of a critical link failure (with 10BT Management Pack installed) Optional redundant power supply: provides uninterrupted power Lifetime warranty: for as long as you own the product HP AdvanceStack 10BT Switching Hub-24R (J3202A) With 24 10Base-T, 1 open management module slot (in front) and 1 open switch module slot (in back) (Shown with optional AUI module) Also available: Hub-24R with Management Pack (J3203A) HP AdvanceStack 10BT Switching Hub-24T (J3204A) With two 12- telco connectors, 1 open management module slot (in front) and 1 open switch module slot (in back) (Shown with optional ThinLAN transceiver) Also available: Hub-24T with Management Pack (J3205A) Segmentable: allows hub performance up to 40Mbps (with 10BT Management Pack installed) HP AdvanceStack 10BT Switching Hub-12R (J3200A) With 12 10Base-T, 1 open management module slot (in front) and 1 open switch module slot (in back) (Shown with optional Management Pack and AUI module) Also available: Hub-12R with Management Pack (J3201A) HP AdvanceStack Hub 10BT Switch Module (J3212A) HP AdvanceStack 10BT Management Pack (J3210A) HP AdvanceStack Redundant Power Supply (J2962A) HP AdvanceStack Transceivers (see pages 20 23) Hub 24R: 24 RJ-45 10Base-T (IEEE Type 10Base-T) Hub 24T: two 12- Telco connectors (IEEE Type 10Base-T) Hub 12R: 12 RJ-45 10Base-T (IEEE Type 10Base-T) All: one open management module slot (in front); one open switch module slot (in back); one open transceiver slot Dimensions: 44.2 x 31.8 x 6.6 cm (17.4 x 12.5 x 2.6 in) Weight: 4.1 kg (9.0 lb) Memory & Processor RAM/ROM capacity: 2 MB + 8 MB optional SIMM Processor type & speed: Intel 40 MHz Flash capacity: 2 MB Mounts in a standard 19-in rack (hardware included) Management (with optional 10BT Management Pack installed) HP TopTools for Hubs & Switches included SNMPv1/v2c RMON groups: 1 (statistics), 2 (history), 3 (alarm), 4 (host), 5 (host topn), 6 (matrix), 7 (filters), 8 (packet capture), and 9 (events) Extended RMON RFC 1368 Repeater MIB and MIB II Temperature: 0 C to 55 C (32 F to 131 F) Relative humidity: 15 to 40 C (104 F), For accessory information, including counts, IEEE specs, and compatibility, see pages Heat dissipation/hour: 134 BTU/hr Maximum wattage: 40W Current: 1.1A max/0.6a max EN 60950/IEC 950; UL 1950; CSA 950; complies with NOM-019-SCFI-1994 FCC Class A and B*; EN 55022/CISPR-22 Class A and B*; VCCI Class A and B* *verified Class B with shielded twisted-pair cables ESD: IEC 801-2; 4 kv CD, 8 kv AD Radiated: IEC 801-3; 3 V/m EFT/Burst: IEC 801-4; 1.0 kv (power line), 18